diff options
Diffstat (limited to 'board/malefor/board.h')
| -rw-r--r-- | board/malefor/board.h | 91 |
1 files changed, 91 insertions, 0 deletions
diff --git a/board/malefor/board.h b/board/malefor/board.h new file mode 100644 index 0000000000..1a9d2bf271 --- /dev/null +++ b/board/malefor/board.h @@ -0,0 +1,91 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Volteer board configuration */ + +#ifndef __CROS_EC_BOARD_H +#define __CROS_EC_BOARD_H + +/* Baseboard features */ +#include "baseboard.h" + +/* Optional features */ +#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */ + +#define CONFIG_POWER_BUTTON + +#undef CONFIG_UART_TX_BUF_SIZE +#define CONFIG_UART_TX_BUF_SIZE 4096 + +/* Keyboard features */ + +/* Sensors */ + +/* USB Type C and USB PD defines */ +/* + * USB-C port's USB2 & USB3 mapping from schematics + * USB2 numbering on PCH - 1 to n + * USB3 numbering on AP - 0 to n (PMC's USB3 numbering for MUX + * configuration is - 1 to n hence add +1) + */ +#define USBC_PORT_0_USB2_NUM 9 +#define USBC_PORT_0_USB3_NUM 1 +#define USBC_PORT_1_USB2_NUM 4 +#define USBC_PORT_1_USB3_NUM 2 + +/* USB Type A Features */ + +/* BC 1.2 */ + +/* Volume Button feature */ + +/* Fan features */ + +/* + * Macros for GPIO signals used in common code that don't match the + * schematic names. Signal names in gpio.inc match the schematic and are + * then redefined here to so it's more clear which signal is being used for + * which purpose. + */ +#define GPIO_AC_PRESENT GPIO_ACOK_OD +#define GPIO_EC_INT_L GPIO_EC_PCH_INT_ODL +#define GPIO_EN_PP5000 GPIO_EN_PP5000_A +#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW +#define GPIO_LID_OPEN GPIO_EC_LID_OPEN +#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV +#define GPIO_PCH_WAKE_L GPIO_EC_PCH_WAKE_ODL +#define GPIO_PCH_PWRBTN_L GPIO_EC_PCH_PWR_BTN_ODL +#define GPIO_PCH_RSMRST_L GPIO_EC_PCH_RSMRST_ODL +#define GPIO_PCH_RTCRST GPIO_EC_PCH_RTCRST +#define GPIO_PCH_SYS_PWROK GPIO_EC_PCH_SYS_PWROK +#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L +#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L +#define GPIO_PG_EC_DSW_PWROK GPIO_DSW_PWROK +#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL +#define GPIO_RSMRST_L_PGOOD GPIO_PG_EC_RSMRST_ODL +#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL +#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL +#define GPIO_WP_L GPIO_EC_WP_L +#define GPIO_USB_C1_BC12_INT_ODL GPIO_USB_C1_MIX_INT_ODL +#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL +#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL +#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L + +#ifndef __ASSEMBLER__ + +#include "gpio_signal.h" +#include "registers.h" + +enum battery_type { + BATTERY_LGC011, + BATTERY_TYPE_COUNT, +}; + +/* TODO: b/143375057 - Remove this code after power on. */ +void c10_gate_change(enum gpio_signal signal); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BOARD_H */ |