1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* EC for Peppy board configuration */
#include "adc.h"
#include "backlight.h"
#include "chip_temp_sensor.h"
#include "chipset.h"
#include "chipset_x86_common.h"
#include "common.h"
#include "ec_commands.h"
#include "extpower.h"
#include "gpio.h"
#include "host_command.h"
#include "i2c.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "lm4_adc.h"
#include "peci.h"
#include "power_button.h"
#include "pwm.h"
#include "pwm_data.h"
#include "registers.h"
#include "switch.h"
#include "temp_sensor.h"
#include "temp_sensor_g781.h"
#include "thermal.h"
#include "timer.h"
#include "util.h"
/* GPIO signal list. Must match order from enum gpio_signal. */
const struct gpio_info gpio_list[] = {
/* Inputs with interrupt handlers are first for efficiency */
{"POWER_BUTTON_L", LM4_GPIO_A, (1<<2), GPIO_INT_BOTH_DSLEEP,
power_button_interrupt},
{"LID_OPEN", LM4_GPIO_A, (1<<3), GPIO_INT_BOTH_DSLEEP,
lid_interrupt},
{"AC_PRESENT", LM4_GPIO_H, (1<<3), GPIO_INT_BOTH_DSLEEP,
extpower_interrupt},
{"PCH_BKLTEN", LM4_GPIO_M, (1<<3), GPIO_INT_BOTH,
backlight_interrupt},
{"PCH_SLP_S0_L", LM4_GPIO_G, (1<<6), GPIO_INT_BOTH,
x86_interrupt},
{"PCH_SLP_S3_L", LM4_GPIO_G, (1<<7), GPIO_INT_BOTH_DSLEEP,
x86_interrupt},
{"PCH_SLP_S5_L", LM4_GPIO_H, (1<<1), GPIO_INT_BOTH_DSLEEP,
x86_interrupt},
{"PCH_SLP_SUS_L", LM4_GPIO_G, (1<<3), GPIO_INT_BOTH,
x86_interrupt},
{"PP1050_PGOOD", LM4_GPIO_H, (1<<4), GPIO_INT_BOTH,
x86_interrupt},
{"PP1350_PGOOD", LM4_GPIO_H, (1<<6), GPIO_INT_BOTH,
x86_interrupt},
{"PP5000_PGOOD", LM4_GPIO_N, (1<<0), GPIO_INT_BOTH,
x86_interrupt},
{"VCORE_PGOOD", LM4_GPIO_C, (1<<6), GPIO_INT_BOTH,
x86_interrupt},
{"PCH_EDP_VDD_EN", LM4_GPIO_J, (1<<1), GPIO_INT_BOTH,
power_interrupt},
{"RECOVERY_L", LM4_GPIO_A, (1<<5), GPIO_PULL_UP|GPIO_INT_BOTH,
switch_interrupt},
{"WP_L", LM4_GPIO_A, (1<<4), GPIO_INT_BOTH,
switch_interrupt},
/* Other inputs */
{"FAN_ALERT_L", LM4_GPIO_B, (1<<0), GPIO_INPUT, NULL},
{"PCH_SUSWARN_L", LM4_GPIO_G, (1<<2), GPIO_INT_BOTH, NULL},
{"USB1_OC_L", LM4_GPIO_E, (1<<7), GPIO_INPUT, NULL},
{"USB2_OC_L", LM4_GPIO_E, (1<<0), GPIO_INPUT, NULL},
{"BOARD_VERSION1", LM4_GPIO_Q, (1<<5), GPIO_INPUT, NULL},
{"BOARD_VERSION2", LM4_GPIO_Q, (1<<6), GPIO_INPUT, NULL},
{"BOARD_VERSION3", LM4_GPIO_Q, (1<<7), GPIO_INPUT, NULL},
{"CPU_PGOOD", LM4_GPIO_C, (1<<4), GPIO_INPUT, NULL},
{"BAT_DETECT_L", LM4_GPIO_B, (1<<4), GPIO_INPUT, NULL},
/* Outputs; all unasserted by default except for reset signals */
{"CPU_PROCHOT", LM4_GPIO_B, (1<<1), GPIO_OUT_LOW, NULL},
{"PP1350_EN", LM4_GPIO_H, (1<<5), GPIO_OUT_LOW, NULL},
{"PP3300_DX_EN", LM4_GPIO_J, (1<<2), GPIO_OUT_LOW, NULL},
{"PP3300_LTE_EN", LM4_GPIO_D, (1<<2), GPIO_OUT_LOW, NULL},
{"PP3300_WLAN_EN", LM4_GPIO_J, (1<<0), GPIO_OUT_LOW, NULL},
{"SUSP_VR_EN", LM4_GPIO_C, (1<<7), GPIO_OUT_LOW, NULL},
{"VCORE_EN", LM4_GPIO_C, (1<<5), GPIO_OUT_LOW, NULL},
{"PP5000_EN", LM4_GPIO_H, (1<<7), GPIO_OUT_LOW, NULL},
{"PP5000_FAN_EN", LM4_GPIO_J, (1<<3), GPIO_OUT_LOW, NULL},
{"SYS_PWROK", LM4_GPIO_H, (1<<2), GPIO_OUT_LOW, NULL},
{"WLAN_OFF_L", LM4_GPIO_J, (1<<4), GPIO_OUT_LOW, NULL},
{"CHARGE_L", LM4_GPIO_E, (1<<6), GPIO_OUT_LOW, NULL},
{"ENABLE_BACKLIGHT", LM4_GPIO_M, (1<<7), GPIO_OUT_LOW, NULL},
{"ENABLE_TOUCHPAD", LM4_GPIO_N, (1<<1), GPIO_OUT_LOW, NULL},
{"ENTERING_RW", LM4_GPIO_D, (1<<3), GPIO_OUT_LOW, NULL},
{"PCH_DPWROK", LM4_GPIO_G, (1<<0), GPIO_OUT_LOW, NULL},
/*
* HDA_SDO is technically an output, but we need to leave it as an
* input until we drive it high. So can't use open-drain (HI_Z).
*/
{"PCH_HDA_SDO", LM4_GPIO_G, (1<<1), GPIO_INPUT, NULL},
{"PCH_WAKE_L", LM4_GPIO_F, (1<<0), GPIO_OUT_HIGH, NULL},
{"PCH_NMI_L", LM4_GPIO_F, (1<<2), GPIO_OUT_HIGH, NULL},
{"PCH_PWRBTN_L", LM4_GPIO_H, (1<<0), GPIO_OUT_HIGH, NULL},
{"PCH_PWROK", LM4_GPIO_F, (1<<5), GPIO_OUT_LOW, NULL},
/*
* PL6 is one of 4 pins on the EC which can't be used in open-drain
* mode. To work around this PCH_RCIN_L is set to an input. It will
* only be set to an output when it needs to be driven to 0.
*/
{"PCH_RCIN_L", LM4_GPIO_L, (1<<6), GPIO_INPUT, NULL},
{"PCH_RSMRST_L", LM4_GPIO_F, (1<<1), GPIO_OUT_LOW, NULL},
{"PCH_SMI_L", LM4_GPIO_F, (1<<4), GPIO_ODR_HIGH, NULL},
{"TOUCHSCREEN_RESET_L", LM4_GPIO_N, (1<<7), GPIO_OUT_LOW, NULL},
{"EC_EDP_VDD_EN", LM4_GPIO_J, (1<<5), GPIO_OUT_LOW, NULL},
{"LPC_CLKRUN_L", LM4_GPIO_M, (1<<2), GPIO_ODR_HIGH, NULL},
{"USB1_ENABLE", LM4_GPIO_E, (1<<4), GPIO_OUT_LOW, NULL},
{"USB2_ENABLE", LM4_GPIO_D, (1<<5), GPIO_OUT_LOW, NULL},
{"PCH_SUSACK_L", LM4_GPIO_F, (1<<3), GPIO_OUT_HIGH, NULL},
{"PCH_RTCRST_L", LM4_GPIO_F, (1<<6), GPIO_ODR_HIGH, NULL},
{"PCH_SRTCRST_L", LM4_GPIO_F, (1<<7), GPIO_ODR_HIGH, NULL},
{"BAT_LED0_L", LM4_GPIO_D, (1<<0), GPIO_ODR_HIGH, NULL},
{"BAT_LED1_L", LM4_GPIO_N, (1<<4), GPIO_ODR_HIGH, NULL},
{"PWR_LED0_L", LM4_GPIO_D, (1<<1), GPIO_ODR_HIGH, NULL},
{"PWR_LED1_L", LM4_GPIO_N, (1<<6), GPIO_ODR_HIGH, NULL},
};
BUILD_ASSERT(ARRAY_SIZE(gpio_list) == GPIO_COUNT);
/* Pins with alternate functions */
const struct gpio_alt_func gpio_alt_funcs[] = {
{GPIO_A, 0x03, 1, MODULE_UART}, /* UART0 */
{GPIO_B, 0x04, 3, MODULE_I2C}, /* I2C0 SCL */
{GPIO_B, 0x08, 3, MODULE_I2C, GPIO_OPEN_DRAIN}, /* I2C0 SDA */
{GPIO_B, 0x40, 3, MODULE_I2C}, /* I2C5 SCL */
{GPIO_B, 0x80, 3, MODULE_I2C, GPIO_OPEN_DRAIN}, /* I2C5 SDA */
{GPIO_G, 0x30, 1, MODULE_UART}, /* UART2 */
{GPIO_J, 0x40, 1, MODULE_PECI}, /* PECI Tx */
{GPIO_J, 0x80, 0, MODULE_PECI, GPIO_ANALOG}, /* PECI Rx */
{GPIO_L, 0x3f, 15, MODULE_LPC}, /* LPC */
{GPIO_M, 0x33, 15, MODULE_LPC}, /* LPC */
{GPIO_N, 0x0c, 1, MODULE_PWM_FAN}, /* Fan0 PWM/tach */
};
const int gpio_alt_funcs_count = ARRAY_SIZE(gpio_alt_funcs);
/* x86 signal list. Must match order of enum x86_signal. */
const struct x86_signal_info x86_signal_list[] = {
{GPIO_PP5000_PGOOD, 1, "PGOOD_PP5000"},
{GPIO_PP1350_PGOOD, 1, "PGOOD_PP1350"},
{GPIO_PP1050_PGOOD, 1, "PGOOD_PP1050"},
{GPIO_VCORE_PGOOD, 1, "PGOOD_VCORE"},
{GPIO_PCH_SLP_S0_L, 1, "SLP_S0#_DEASSERTED"},
{GPIO_PCH_SLP_S3_L, 1, "SLP_S3#_DEASSERTED"},
{GPIO_PCH_SLP_S5_L, 1, "SLP_S5#_DEASSERTED"},
{GPIO_PCH_SLP_SUS_L, 1, "SLP_SUS#_DEASSERTED"},
};
BUILD_ASSERT(ARRAY_SIZE(x86_signal_list) == X86_SIGNAL_COUNT);
/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
const struct adc_t adc_channels[] = {
/* EC internal temperature is calculated by
* 273 + (295 - 450 * ADC_VALUE / ADC_READ_MAX) / 2
* = -225 * ADC_VALUE / ADC_READ_MAX + 420.5
*/
{"ECTemp", LM4_ADC_SEQ0, -225, ADC_READ_MAX, 420,
LM4_AIN_NONE, 0x0e /* TS0 | IE0 | END0 */, 0, 0},
/* IOUT == ICMNT is on PE3/AIN0 */
/* We have 0.01-ohm resistors, and IOUT is 20X the differential
* voltage, so 1000mA ==> 200mV.
* ADC returns 0x000-0xFFF, which maps to 0.0-3.3V (as configured).
* mA = 1000 * ADC_VALUE / ADC_READ_MAX * 3300 / 200
*/
{"ChargerCurrent", LM4_ADC_SEQ1, 33000, ADC_READ_MAX * 2, 0,
LM4_AIN(0), 0x06 /* IE0 | END0 */, LM4_GPIO_E, (1<<3)},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
const struct pwm_t pwm_channels[] = {
{CONFIG_FAN_CH_CPU, PWM_CONFIG_HAS_RPM_MODE},
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
/* Note: battery and charger share a port. Only include it once in
* this list so we don't double-initialize it. */
{"batt_chg", I2C_PORT_BATTERY, 100},
{"thermal", I2C_PORT_THERMAL, 100},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
/* Temperature sensors data; must be in same order as enum temp_sensor_id. */
const struct temp_sensor_t temp_sensors[] = {
{"PECI", TEMP_SENSOR_TYPE_CPU, peci_temp_sensor_get_val, 0, 2},
{"ECInternal", TEMP_SENSOR_TYPE_BOARD, chip_temp_sensor_get_val, 0, 4},
{"G781Internal", TEMP_SENSOR_TYPE_BOARD, g781_get_val,
G781_IDX_INTERNAL, 4},
{"G781External", TEMP_SENSOR_TYPE_BOARD, g781_get_val,
G781_IDX_EXTERNAL, 4},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
/* Thermal limits for each temp sensor. All temps are in degrees K. Must be in
* same order as enum temp_sensor_id. To always ignore any temp, use 0.
*/
struct ec_thermal_config thermal_params[] = {
/* Only the AP affects the thermal limits and fan speed. */
{{C_TO_K(100), C_TO_K(114), C_TO_K(110)}, C_TO_K(60), C_TO_K(90)},
{{0, 0, 0}, 0, 0},
{{0, 0, 0}, 0, 0},
{{0, 0, 0}, 0, 0},
};
BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
struct keyboard_scan_config keyscan_config = {
.output_settle_us = 40,
.debounce_down_us = 6 * MSEC,
.debounce_up_us = 30 * MSEC,
.scan_period_us = 1500,
.min_post_scan_delay_us = 1000,
.poll_timeout_us = SECOND,
.actual_key_mask = {
0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xca /* full set */
},
};
/**
* Discharge battery when on AC power for factory test.
*/
int board_discharge_on_ac(int enable)
{
if (enable)
gpio_set_level(GPIO_CHARGE_L, 1);
else
gpio_set_level(GPIO_CHARGE_L, 0);
return EC_SUCCESS;
}
|
