summaryrefslogtreecommitdiff
path: root/driver
Commit message (Expand)AuthorAgeFilesLines
* rt1718s: add console command for gpioEric Yilun Lin2022-01-062-0/+30
* zephyr: Add initial shim for lsm6dso sensorAndrew McRae2021-12-302-12/+18
* bq257x0: add customerized ILIM2 thresholdreno.wang2021-12-292-7/+37
* rt1718s: expose software reset functionEric Yilun Lin2021-12-282-1/+9
* zephyr: add ICM42607 sensorTing Shen2021-12-241-0/+21
* bq25720: add more options for VSYS_UVPreno.wang2021-12-241-0/+6
* mp2964: add definitionsBoris Mittelberg2021-12-231-0/+23
* ppc: add ktu1125 driverBoris Mittelberg2021-12-233-0/+664
* mt6360: enable high impedance mode to save powerTing Shen2021-12-232-1/+12
* rt1718s: add more i2c addressEric Yilun Lin2021-12-231-1/+2
* rt1718s: support FRS detection at TCPC driverEric Yilun Lin2021-12-233-7/+33
* ps8762: add DCI mode config registerTing Shen2021-12-221-1/+5
* cleanup: driver/led: oz554 and mp3385Zick Wei2021-12-204-18/+5
* driver/led: add mp3385 low level driverZick Wei2021-12-203-0/+168
* driver/tcpm/it83xx, it8xxx2: ITE inactive port return from HOOKRuibin Chang2021-12-172-0/+40
* driver/tcpm/it83xx, it8xxx2: set sleep mask for mixed TCPC caseRuibin Chang2021-12-172-25/+51
* TMP112: Prepare for zephyr useDiana Z2021-12-162-67/+5
* driver/sb_rmi: Do not clear interrupt after transactionRob Barnes2021-12-161-10/+3
* driver/sb_rmi: Update retry delaysRob Barnes2021-12-161-3/+3
* driver: lsm6dso: Fix FIFO processing like other driversGwendal Grignou2021-12-141-14/+10
* driver: remove MOTIONSENSE_FLAG_INT_ACTIVE_HIGHGwendal Grignou2021-12-143-15/+5
* driver: lis2dw12: simplify interrupt processingGwendal Grignou2021-12-141-53/+16
* driver: lsm6dsm: simplify interrupt processingGwendal Grignou2021-12-141-69/+28
* mchp: Add max695x_init() after chipset is restarted upmartin yan2021-12-131-0/+1
* kakadu/katsu: fix bugged bits in chargerTing Shen2021-12-101-5/+6
* ps8743: add i2c_field_update and DCI mode config registerTing Shen2021-12-091-0/+8
* zephyr: emul: set/read accel data support for LIS2DW12 emulatorTristan Honscheid2021-12-081-0/+11
* zephyr: lis2dw12: Remove redundant min data rate clampTristan Honscheid2021-12-081-3/+0
* zephyr: lis2dw12: Add tests for set_power_mode()Tristan Honscheid2021-12-082-8/+15
* atomic: use atomic_t where it is possibleDawid Niedzwiecki2021-12-086-8/+8
* ppc/syv682x: change the type sink_ocp_count to atomic_tDawid Niedzwiecki2021-12-071-3/+3
* bq257x0: Fix step size of minimum system voltagereno.wang2021-12-071-2/+2
* USB MUX: Wait on ACK for HPD changes when requiredDiana Z2021-12-0210-16/+38
* zephyr: Shim nct38xx io expander alertWealian Liao2021-12-021-7/+41
* zephyr: test: sn5s330 set vbus current limit apiAaron Massey2021-12-021-0/+2
* mt6360/rt1718s: prevent BC1.2 trigger after PD establishedTing Shen2021-12-012-2/+10
* tcpm/rt1718s: uses mutex_t insteadEric Yilun Lin2021-12-011-1/+1
* Virtual mux: Always wait for ACKDiana Z2021-12-011-9/+3
* zephyr: drivers: Use proxy only in usb_mux testTomasz Michalec2021-11-301-0/+7
* zephyr: test: verify sn5s330 enter_low_powerAaron Massey2021-11-251-0/+1
* RAA489000: Fixed RAA489000 max charging currentYu-An Chen2021-11-241-1/+1
* usb_mux: tusb1064: Add method to set DP Rx EQ gainScott Collyer2021-11-232-21/+53
* driver: bmi3xx: Fix offset values read/write issueLatchia2021-11-232-50/+175
* driver/temp_sensor: support thermal sensor pct2075Zick Wei2021-11-233-0/+162
* bq25710: Allow PKPWR_TOVLD_DEG to be configuredCaveh Jalali2021-11-232-0/+18
* zephyr: test: sn5s330 dead battery boot initAaron Massey2021-11-221-1/+8
* bq25710: Allow PP_IDCHG2 to be configuredCaveh Jalali2021-11-191-0/+7
* bq25710: Add PP_IDCHG2 definitionCaveh Jalali2021-11-191-0/+5
* ps8xxx: disable low power mode for PS8815Scott Chao2021-11-191-4/+5
* bq25710: Update bq25710 BATOC_VTH definitionsCaveh Jalali2021-11-182-20/+5
View Lorry Controller Status