summaryrefslogtreecommitdiff
path: root/driver/ppc/sn5s330.c
Commit message (Expand)AuthorAgeFilesLines
* ppc: Use hard reset to recover from CC overvoltageEdward Hill2019-12-061-66/+27
* helios: Detect PPC sn5s330 CC1/CC2 OVP and release OVP.Michael5 Chen2019-12-061-14/+49
* Remove __7b, __8b and __7bfDenis Brockus2019-08-231-31/+31
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-08-231-42/+50
* sn5s330: Add VCONN overcurrent logging.Aseda Aboagye2019-05-091-0/+20
* sn5s330: Add support for SBU FET control.Aseda Aboagye2019-05-091-1/+18
* USB PD: PPC: Add overcurrent handling.Aseda Aboagye2019-02-071-2/+3
* SN5S330: treat interrupts as level-sensitiveDiana Z2018-11-141-22/+41
* ppc: Increase deglitch time on SN5S330Jonathan Brandmeyer2018-09-141-0/+21
* sn5s330: add low power modeJett Rink2018-08-231-4/+53
* sn5s330: add helper methods for common access patternJett Rink2018-08-081-58/+41
* ppc: sn5s330: Set VCONN ILIM to 0.6A (min).Aseda Aboagye2018-06-191-4/+6
* sn5s330: Track source enabled state locallyEdward Hill2018-06-071-34/+5
* sn5s330: disable under voltage protectionJett Rink2018-05-241-1/+9
* ppc: flush console regularly during console dumpJett Rink2018-05-241-0/+14
* ppc: sn5s330: Add port number to error messagesScott Collyer2018-05-161-28/+29
* ppc: Add driver for NX20P3483Scott Collyer2018-03-201-0/+8
* sn5s330: Disable vSafe0V interruptsEdward Hill2018-02-091-10/+11
* ppc: Add Vconn and CC polarity settings.Aseda Aboagye2018-02-011-0/+36
* cleanup: Correcting VBUS discharge commentJett Rink2018-02-011-1/+2
* sn5s330: Enable VBUS interruptsEdward Hill2018-01-311-9/+34
* usb pd: Adding PPC vbus discharge pathJett Rink2018-01-311-0/+24
* ppc: Add API to set Vbus source ILIM.Aseda Aboagye2017-12-131-0/+37
* ppc: sn5s330: Add interrupt handler.Aseda Aboagye2017-12-121-0/+40
* sn5s330: Add support for Vbus detection.Aseda Aboagye2017-12-061-5/+20
* ppc: sn5s330: Fix current limit setting.Aseda Aboagye2017-12-061-7/+17
* ppc: Create generic PPC driver framework.Aseda Aboagye2017-12-061-70/+45
* ppc: Add common APIs.Aseda Aboagye2017-12-051-0/+25
* ppc: sn5s330: Add API to determine if FET is on.Aseda Aboagye2017-12-051-15/+63
* sn5s330: Clear interrupts and setup masks at init.Aseda Aboagye2017-12-051-2/+90
* driver: ppc: Add support for TI SN5S330.Aseda Aboagye2017-10-231-0/+305
View Lorry Controller Status