summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* jinlon: Increase CONFIG_POWER_BUTTON_INIT_TIMEOUTDevin Lu2020-02-211-0/+7
* dedede: Set pullup on PG_PP1050_ST_OD only after RSMRSTAseda Aboagye2020-02-211-1/+1
* it83xx/dac: add DAC moduletim2020-02-212-0/+2
* Ezkinil: Add new SMP batterySue2020-02-212-12/+13
* puff: Disable console command help to recover flash spaceTom Hughes2020-02-211-0/+2
* Servo: Adds persistent storage of MAC addressBrian J. Nemec2020-02-211-0/+2
* dratini: Increase CONFIG_POWER_BUTTON_INIT_TIMEOUTTim Wawrzynczak2020-02-211-0/+7
* kohaku: Modify TCPC register MUX_DP_EQ_Configuration setting on MB port.Shelley Chen2020-02-211-0/+11
* Juniper: Change LED control to GPIODavid Huang2020-02-204-68/+67
* Revert "Trogdor: Measure the rail PP868_S1C_S2C_S3C"Wai-Hong Tam2020-02-203-11/+0
* waddledoo:Handle EC_AP_PCH_PWROK_OD and ALL_SYS_PWRGDSooraj Govindan2020-02-191-0/+1
* juniper: reduce bitbang failrateTing Shen2020-02-192-3/+3
* driver/tcpm/it8xxx2: PD driver for chip it8xxx1/8xxx2Ruibin Chang2020-02-192-2/+2
* mushu: add FAN2 supportloganliao2020-02-193-2/+38
* akemi: remove CONFIG_SYSTEM_UNLOCKED, enable CONFIG_USB_PD_COMM_LOCKEDxiaoqiang.zhu2020-02-181-3/+1
* akemi: Enable TI BQ40Z5 series FW workaroundTim Wawrzynczak2020-02-181-0/+11
* hatch: Add check for convertible SKUs in lid_angle_peripheral_enableTim Wawrzynczak2020-02-188-1/+52
* garg360: add covertible SKU ID (again)Devin Lu2020-02-181-2/+2
* kappa: add gpio led controllingDevin Lu2020-02-184-52/+126
* jacuzzi: enable tablet mode in ECTing Shen2020-02-189-3/+19
* driver/ioexpander_it8801: add I/O expander driver for GPIOtim2020-02-178-5/+63
* kodama: remove dedicated charge port customizationTing Shen2020-02-171-22/+0
* kappa: reduce bitbang failrateTing Shen2020-02-172-3/+3
* morphius: add Power/Battery LED behaviorZick Wei2020-02-152-39/+196
* Mushu : Assign SYS_RESET_ODL to GPIOC5loganliao2020-02-151-2/+1
* tcpci: Rename TCPC_FLAGS_TCPCI_V2_0 to TCPC_FLAGS_TCPCI_REV2_0Edward Hill2020-02-141-6/+6
* dalboz/ezkinil: Connect up HPD interruptsEdward Hill2020-02-142-4/+6
* zork: HPD for DB OPT3 MST hubEdward Hill2020-02-142-2/+2
* zork: HPD for DB OPT1 HDMIEdward Hill2020-02-142-2/+4
* Kodama: delay to enable charger EOC and TE functionxiong.huang2020-02-141-28/+0
* intelrvp: Correct build assert array size comparisonVijay Hiremath2020-02-141-1/+1
* zork: Sync GPIO changesEdward Hill2020-02-143-8/+9
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-1442-227/+148
* foob : Add new battery informationxiaoqiang.zhu2020-02-132-0/+29
* tglrvp_ite: increase the chipset task stackSunhee Wee2020-02-131-1/+1
* TCPMv1/v2: Move pd_check_requested_voltage() to common fileVijay Hiremath2020-02-122-16/+1
* Fizz: add fan table for excelsiorJeff Chase2020-02-122-0/+17
* morphius: modify battery level near fullZick Wei2020-02-121-0/+3
* Waddledee: Add thermistorsDiana Z2020-02-122-1/+27
* morphius: add PWM CH0 for LED controlZick Wei2020-02-118-0/+166
* trembyle: initialize PS8811 after AP rail is highDenis Brockus2020-02-111-2/+2
* jacuzzi: unmux pins away from emmc once we want to talk to sensorsAlexandru M Stan2020-02-112-13/+19
* Waddledee: Initial board fileDiana Z2020-02-116-0/+525
* ezkinil: Initial EC imageMartin Roth2020-02-108-0/+428
* juniper: implement otg functionTing Shen2020-02-103-18/+0
* jacuzzi: enable watchdog interruptTing Shen2020-02-103-3/+6
* puff: re-enable TCPMv2Peter Marheine2020-02-101-5/+1
* EFS2: Implement Early Firmware Selection ver.2Daisuke Nojiri2020-02-094-6/+6
* kakadu: add initial content for the buildCasper Chang2020-02-077-0/+983
* Kindred: Fix reset trigger even system force to G3.David Huang2020-02-071-7/+4
View Lorry Controller Status