summaryrefslogtreecommitdiff
path: root/board/sasuke
Commit message (Expand)AuthorAgeFilesLines
* usbc: wrap task_set_event to have an explicit port argumentFabio Baltieri2022-05-271-2/+2
* tree: Files should end with single newlineTom Hughes2021-10-181-1/+0
* board/sasuke: Fix cast to incorrect typeTom Hughes2021-10-081-1/+1
* dedede: Make scope of SSFC definition per boardParth Malkan2021-07-193-1/+119
* dedede: Enable CONFIG_ASSERT_CCD_MODE_ON_DTS_CONNECTRob Barnes2021-07-021-1/+1
* keeby/dedede: Gate temp sensor access by GPIOAseda Aboagye2021-06-291-1/+0
* LED On/Off: Make battery LED optionalDiana Z2021-04-221-4/+5
* LED On/Off: Remove power LED configDiana Z2021-04-222-3/+2
* sasuke : fix bug during faft_pdYongBeum.Ha2021-04-221-11/+19
* sasuke : support multi-usb muxYongBeum.Ha2021-04-222-1/+34
* sasuke : add sunwoda batteryYongBeum.Ha2021-04-142-0/+32
* sasuke : disable alternative setting for GPIOB4/GPIOB5YongBeum.Ha2021-04-131-1/+1
* sasuke : enable pull-down of GPIOB4,GPIOB5YongBeum.Ha2021-04-131-2/+2
* sasuke : set nc pin to pull-downYongBeum.Ha2021-04-021-19/+19
* sasuke: remove CONFIG_SYSTEM_UNLOCKED, enable CONFIG_USB_PD_COMM_LOCKEDYongBeum.Ha2021-04-021-6/+1
* dedede/raa489000: Enable ASGATE when sourcingAseda Aboagye2021-04-011-0/+5
* Reland "dedede/raa489000: Disable ASGATE from READY state"Aseda Aboagye2021-04-011-2/+6
* Add a common header for board_is_sourcing_vbus()Simon Glass2021-03-311-2/+0
* Revert "dedede/raa489000: Disable ASGATE from READY state"Aseda Aboagye2021-03-311-6/+2
* dedede/raa489000: Disable ASGATE from READY stateAseda Aboagye2021-03-301-2/+6
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
* Sasuke use RAA489000, and need more debounce time to exit low power mode.Jongpil Jung2021-03-111-0/+2
* sasuke : lower input voltage on S0iXYongBeum.Ha2021-03-111-0/+22
* sasuke : enable C0 charger ADC on Z-sleepYongBeum.Ha2021-03-101-1/+1
* sasuke : change charging max temperatureYongBeum.Ha2021-03-032-1/+3
* sasuke : define CONFIG_CHARGE_RAMP_HWYongBeum.Ha2021-02-251-0/+1
* sasuke : tune retimer 0/1YongBeum.Ha2021-02-191-3/+87
* sasuke : add WA to connect CCDYongBeum.Ha2021-02-172-0/+60
* magolor and friends: Adjust OCPC PID constantsAseda Aboagye2021-02-171-19/+6
* sasuke : set charging current/voltageYongBeum.Ha2021-02-032-1/+37
* sasuke : tune usb_eq and usb_gain on port 1YongBeum.Ha2021-02-021-0/+69
* nb7v904m : add function to tune eq and gainYongBeum.Ha2021-02-021-9/+0
* Dedede: Add RAA489000 output current settingDiana Z2021-01-291-0/+8
* sasuke : add retimer to port 0YongBeum.Ha2021-01-281-0/+7
* dedede: Add MKBP_EVENT to baseboardEvan Green2021-01-261-3/+0
* sasuke : change LED gpio settingYongBeum.Ha2021-01-221-3/+3
* config: Provide default VCONN Swap delayAbe Levkoy2021-01-221-0/+1
* config: Make VCONN Swap delay a documented optionAbe Levkoy2021-01-221-2/+2
* Madoo: Fix main board charger can't wake from hibernateKo_Ko2021-01-221-2/+2
* sasuke : modify battery informationYongBeum.Ha2021-01-152-22/+32
* sasuke: Enable USB-A VbusYongBeum.Ha2021-01-143-2/+16
* sasuke : Initialize the vivaldi keyboardstabilize-rust-13720.B-mainYongBeum.Ha2021-01-121-0/+27
* sasuke : tune usb_eq on port 1YongBeum.Ha2021-01-091-0/+9
* sasuke: Rerun USB-C interrupts if still assertedAseda Aboagye2021-01-061-11/+61
* sasuke : add thermisterYongBeum.Ha2021-01-062-0/+28
* sasuke : Config EC chipsetYongBeum.Ha2021-01-052-4/+1
* TCPMv2: Update source-out configsDiana Z2020-12-241-10/+0
* task_set_event: remove the wait argumentDawid Niedzwiecki2020-12-141-2/+2
* sasuke : apply EC change in sasukeYongBeum.Ha2020-12-095-294/+136
* sasuke: Initial EC imageRaymond Chung2020-12-018-0/+1192
View Lorry Controller Status