summaryrefslogtreecommitdiff
path: root/board/nocturne
Commit message (Expand)AuthorAgeFilesLines
* chgstv2: Unify power-on and shutdown battery thresholdsDaisuke Nojiri2022-09-131-0/+1
* usb_pd_policy: Make a lot of objects commonAseda Aboagye2020-06-252-344/+5
* usb_pd: use enum tcpc_rp_value instead of intCaveh Jalali2020-06-251-1/+1
* Remove __7b, __8b and __7bfDenis Brockus2019-08-232-29/+29
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-08-232-66/+95
* TCPC: Make tcpc_config handle other bus typesDaisuke Nojiri2019-08-231-9/+10
* tcpm: Refactor tcpc_config to include a flags fieldScott Collyer2019-08-231-2/+4
* common: motion_sense: Require CONFIG_MOTION_SENSOR_MAX_COUNTYuval Peress2019-08-021-0/+1
* motion: Define macros for custom eventsGwendal Grignou2019-08-021-2/+4
* mkbp_event,include/config.h: Clarify MKBP delivery method.Yilun Lin2019-08-021-0/+1
* USB PD: PPC: Add overcurrent handling.Aseda Aboagye2019-02-071-6/+7
* ss-mux: remove unused port_addr initializationv2.1.0Jett Rink2018-09-181-3/+0
* type: Rename matrix_3x3_t to mat33_fp_tYilun Lin2018-09-181-1/+1
* nocturne: Use USBC alert signal for TCPC alert statusScott Collyer2018-08-311-10/+14
* nocturne: switch from tablet mode to base state reportingDmitry Torokhov2018-08-312-11/+4
* nocturne: Remove CONFIG_SYSTEM_UNLOCKED.stabilize-11005.BAseda Aboagye2018-08-251-3/+0
* nocturne: Enable CONFIG_I2C_BUS_MAY_BE_UNPOWEREDAseda Aboagye2018-08-222-0/+10
* nocturne: Turn on UHALL_PWR_EN by default.Aseda Aboagye2018-08-181-1/+1
* nocturne: Enable TCPC low power modePuthikorn Voravootivat2018-08-171-0/+2
* nocturne: Control UHALL_PWR_EN based on lid state.Aseda Aboagye2018-08-172-1/+13
* nocturne: Enable low power idlePuthikorn Voravootivat2018-08-171-0/+1
* nocturne: Add board_set_tcpc_power_mode().Aseda Aboagye2018-08-172-0/+12
* servo_v4: add per port dualrole settingNick Sanders2018-08-151-2/+2
* nocturne: Change RCAM_VSYNC to rising edge.Aseda Aboagye2018-08-151-1/+1
* nocturne: Flip board version reporting.Aseda Aboagye2018-08-151-5/+5
* nocturne: Update sensor active mask to include S3.Aseda Aboagye2018-08-101-3/+3
* nocturne: set default ALS calibrationPuthikorn Voravootivat2018-08-091-1/+2
* nocturne: Dynamically disable effect of SLP_S0# on all VRsPuthikorn Voravootivat2018-08-071-2/+87
* nocturne: Enable active discharge on V1.8A & V3.3AAseda Aboagye2018-08-031-0/+3
* nocturne: Set OTG pins on UFP for Port 0.Aseda Aboagye2018-07-311-1/+10
* nocturne: Tie batt disconnect state to DSG FET status.Aseda Aboagye2018-07-301-5/+4
* nocturne: Enable sensor IRQs in S0.Aseda Aboagye2018-07-261-0/+4
* nocturne: Enable DPTF support.Aseda Aboagye2018-07-251-0/+2
* nocturne: Restart base detection in S3.Aseda Aboagye2018-07-251-4/+4
* nocturne: Don't read gyro temp sensor in <= S5.Aseda Aboagye2018-07-191-1/+14
* nocturne: Adjust IMVP8 step decay quantization.Aseda Aboagye2018-07-181-0/+15
* nocturne: Add Gyro temperature sensor.Aseda Aboagye2018-07-182-0/+3
* nocturne: Reduce input current limit by 5%.Aseda Aboagye2018-07-171-3/+8
* nocturne: Set BMI160 speed to 400kHZGwendal Grignou2018-07-141-2/+1
* nocturne: Change FIFO settingsGwendal Grignou2018-07-141-1/+1
* nocturne: Add on-board temperature sensorsSumeet Pawnikar2018-06-282-0/+30
* nocturne: Remove internal pulls on PD interrupts.Aseda Aboagye2018-06-271-0/+13
* nocturne: Update LED settings.Aseda Aboagye2018-06-272-5/+11
* nocturne: Turn off sensor interrupts in S5.Aseda Aboagye2018-06-261-4/+21
* nocturne: Support new base USB fault protection IC.Aseda Aboagye2018-06-212-4/+18
* nocturne: Disable HC debug by defaultGwendal Grignou2018-06-211-0/+8
* nocturne: Fix BMI160 settingGwendal Grignou2018-06-151-5/+4
* nocturne: Fix CPU_PROCHOT polarity.Aseda Aboagye2018-06-082-1/+2
* Fizz: add CONFIG_BOARD_HAS_RTC_RESETRyan Zhang2018-06-071-1/+0
* nocturne: Change SYS_RST_L to open drain.Aseda Aboagye2018-06-071-1/+1
View Lorry Controller Status