summaryrefslogtreecommitdiff
path: root/board/kunimitsu
Commit message (Expand)AuthorAgeFilesLines
* GLaDOS: Kunimitsu: Enable link-time optimization.Aseda Aboagye2015-11-091-0/+1
* mec1322: adjust mec adc channels for analog reference of 3.0VAlec Berg2015-11-091-1/+1
* tcpm: Add configuration struct for tcpc i2c paramsShawn Nematbakhsh2015-11-081-0/+5
* chg: add narrow VDC power path supportRong Chang2015-11-051-0/+1
* mec1322: reduce system stack sizeli feng2015-11-041-1/+1
* led: correct LED blinking intervalli feng2015-11-041-4/+4
* cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGsShawn Nematbakhsh2015-11-031-0/+1
* mec1322: Remove CONFIG_PORT80_TASK_EN from boards.Aseda Aboagye2015-10-231-1/+0
* pd: change battery and variable sink cap for voltage inaccuracyAlec Berg2015-10-231-2/+2
* Kunimitsu: Add support to enable L3GD20H gyrometerVijay Hiremath2015-10-212-0/+46
* kunimitsu: enable USB-A port power controlKevin K Wong2015-10-212-4/+5
* Kunimitsu: Enable motion_sense_taskstabilize-smaug-7566.Bli feng2015-10-191-0/+1
* mec1322: Change the Port 80 task to a timer IRQ.Aseda Aboagye2015-10-191-2/+1
* Kunimitsu: PMIC: Keep the emergency reset time to defaultVijay Hiremath2015-10-171-11/+0
* glados / kunimitsu / chell: Slow EC-->PD I2C bus to 500 KHzShawn Nematbakhsh2015-10-151-1/+1
* Skylake: Configure EC to use W25X40 flash instead of W25Q64Shamile Khan2015-10-151-1/+1
* GLaDOS: Kunimitsu: Chell: Reduce UART TX buffer to 512B.Aseda Aboagye2015-10-151-0/+3
* glados: kunimitsu: Change image size to 100K.stabilize-smaug-7547.BAseda Aboagye2015-10-131-0/+3
* Kunimitsu: implement x86 power cycle on EC resetVijay Hiremath2015-10-133-2/+40
* cleanup: pd: remove duplicate code for checking request msgAlec Berg2015-10-131-26/+0
* Kunimitsu: PMIC: Configure the discharge configuration registersVijay Hiremath2015-10-131-0/+42
* skylake: Move USB enable gpio control to board hooksDuncan Laurie2015-10-121-0/+4
* Kunimitsu: Enable heavysleep idle taskKyoung Kim2015-10-073-0/+5
* Kunimitsu: Enable FAN controlKyoung Kim2015-10-073-5/+49
* kunimitsu: Correct ADC calculation for VBUS.Kevin K Wong2015-10-061-2/+2
* ALS: Disable the ALS task if all the ALS inits failVijay Hiremath2015-10-021-1/+1
* Driver: ISL9237: Monitor system power consumptionVijay Hiremath2015-10-022-4/+22
* kunimitsu: revert TYPEC PD VBUS_DET / CHARGE_EN for older hardware.Kevin K Wong2015-09-292-1/+29
* Kunimitsu: Fix VRMODECTRL for PMIC VCCIO controlKyoung Kim2015-09-291-1/+1
* Kunimitsu: initialize PMIC for VCCIO decay on assertion of SLP_S0Kyoung Kim2015-09-251-1/+30
* pd: set USB communications capable flag in PDOAlec Berg2015-09-181-1/+2
* Kunimitsu: PMIC: Emergency reset on long press of power buttonVijay Hiremath2015-09-181-3/+41
* motion: add config option to use the old accelerometer ref frameAlec Berg2015-09-171-16/+0
* Kunimitsu: Enable "shmem" console command for FAFT testingVijay Hiremath2015-09-161-1/+0
* cleanup: Remove redundant FLASH_SIZE CONFIGsShawn Nematbakhsh2015-09-161-1/+1
* driver: Refactor Kionix Accelerometer drivers.Aseda Aboagye2015-09-151-3/+7
* Kunimitsu: Enable keyboard console commands for FAFT testingVijay Hiremath2015-09-111-1/+0
* Kunimitsu: Disable motion_sense_task to save spaceVijay Hiremath2015-09-113-1/+4
* Driver: ISL9237: Enable trickle chargingVijay Hiremath2015-09-101-0/+3
* mec1322: Properly initialize the ALTERNATE GPIO level flagsKevin K Wong2015-09-101-6/+1
* als: Disable task when host is not runningDuncan Laurie2015-09-101-0/+1
* glados: kunimitsu: remove dual-port charge enable workaroundAlec Berg2015-09-092-19/+7
* Kunimitsu: Enable support for limiting the inrush currentVijay Hiremath2015-09-043-7/+19
* Kunimitsu: Workaround for PMIC emergency shutdownVijay Hiremath2015-09-031-0/+20
* kunimitsu: port increase powerbtn task stack sizeWenkai Du2015-08-311-1/+1
* cyan, kunimitsu, strago: motion_sense: use new rate calculationGwendal Grignou2015-08-291-32/+46
* Keyboard: Add a macro to conditionally compile the console commandsVijay Hiremath2015-08-281-0/+1
* Kunimitsu: Buffer AC status to the PCHVijay Hiremath2015-08-272-1/+13
* kunimitsu: battery led implementationMike M Hsieh2015-08-273-1/+171
* glados: Disable keyboard + trackpad in tablet modeShawn Nematbakhsh2015-08-241-0/+15
View Lorry Controller Status