summaryrefslogtreecommitdiff
path: root/board/kohaku
Commit message (Expand)AuthorAgeFilesLines
* adc: Remove adc_chip.h where adc.h is usedCaveh Jalali2021-08-271-1/+0
* LED On/Off: Make battery LED optionalDiana Z2021-04-221-4/+5
* LED On/Off: Remove power LED configDiana Z2021-04-222-3/+2
* thermisor: move header to include dirDawid Niedzwiecki2021-04-221-1/+1
* kohaku : limit charging current to 0.45CYongBeum.Ha2021-04-062-0/+32
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
* kohaku: Set base light sensor information correctlyGwendal Grignou2020-12-211-4/+3
* task_set_event: remove the wait argumentDawid Niedzwiecki2020-12-141-2/+2
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
* hatch: Remove the board keyscan_config definition and use the defaultWai-Hong Tam2020-05-111-1/+0
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
* kohaku: fixup names to temp sensorsTodd Broch2020-04-071-8/+8
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-281-1/+3
* kohaku: Modify TCPC register MUX_DP_EQ_Configuration setting on MB port.Shelley Chen2020-02-211-0/+11
* hatch: Add check for convertible SKUs in lid_angle_peripheral_enableTim Wawrzynczak2020-02-181-0/+7
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-8/+4
* hatch: Define CONFIG_MKBP_EVENT_WAKEUP_MASK as 0Tim Wawrzynczak2020-02-061-3/+0
* kohaku : set CONFIG_CHARGER_BQ25710_IDCHG_LIMIT_MA to 6144YongBeum.Ha2020-01-291-1/+1
* kohaku: Define CONFIG_MKBP_EVENT_WAKEUP_MASK as 0Tim Wawrzynczak2020-01-221-0/+3
* board: sensor: remove identity matricesGwendal Grignou2020-01-131-12/+1
* kohaku: tcs3400: update coeffs for als and rgb sensorMengqi Guo2020-01-031-15/+15
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-2/+2
* Revert "hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATI...Josh Tsai2019-12-131-5/+0
* kohaku: tcs3400: update coeffs for als and rgb sensorMengqi Guo2019-12-121-19/+19
* drivers/tcs3400: update fields for new irt scale factorNick Vaccaro2019-12-121-3/+4
* hatch: refactor PD_MAX_VOLTAGE/PD_MAX_CURRENT/PD_MAX_POWER/PD_OPERATING_POWER/Josh Tsai2019-12-061-0/+5
* all hatch variants: Make sure EC_RST_ODL is GPIO_LOCKEDShelley Chen2019-11-221-0/+11
* kohaku : change battery discharging max temperatureYongBeum.Ha2019-11-181-1/+1
* kohaku: enable CONFIG_BATTERY_CHECK_CHARGE_TEMP_LIMITSPaul Fagerburg2019-11-151-0/+1
* kohaku: add meaningful names to temp sensorsPaul Fagerburg2019-11-131-4/+4
* kohaku: fix indentsPaul Fagerburg2019-11-131-7/+7
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-011-4/+4
* eSPI: Configure SLP_S3, SLP_S4 separatelyAbe Levkoy2019-10-301-1/+3
* cometlake: Cleanup GPIO_PCH_SYS_PWROKKeith Short2019-10-151-8/+9
* kohaku: Change halt temperature to 90 CTim Wawrzynczak2019-10-151-1/+1
* kohaku: Enable multiple DPTF profileSeunghwan Kim2019-09-271-0/+3
* kohaku: implement ledsYongBeum.Ha2019-09-112-33/+86
* hatch: Change interrupt handler for EC_RSMRST_LScott Collyer2019-09-041-1/+1
* tcs3400: update fields for als and rgb sensorNick Vaccaro2019-08-201-8/+33
* kohaku: Update tuned parameters to get lux from BH1733Jongpil Jung2019-08-131-12/+20
* kohaku: add TEMP_SENSOR_3 and TEMP_SENSOR_4 to DPTFPaul Fagerburg2019-08-133-2/+47
* kohaku: update for 30.9K resistor in thermistor dividerPaul Fagerburg2019-08-122-3/+3
* hatch: SLP_S3/S4 sideband signals guarded with wrong configKeith Short2019-08-122-2/+1
* kohaku: Change location for bh1730 ALSScott Collyer2019-08-092-5/+5
* hatch: remove CONFIG_SYSTEM_UNLOCKED, enable CONFIG_USB_PD_COMM_LOCKEDPaul Fagerburg2019-08-061-3/+1
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-7/+7
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-7/+7
* kohaku: Support SDI battery packPhilip Chen2019-07-172-1/+30
* kohaku: Always return BP_YES for battery presence for board id 1Furquan Shaikh2019-07-161-0/+15
View Lorry Controller Status