summaryrefslogtreecommitdiff
path: root/board/fleex
Commit message (Expand)AuthorAgeFilesLines
* motion_sensor: Remove |int_signal| fieldGwendal Grignou2021-12-141-4/+0
* tree: Files should end with single newlineTom Hughes2021-10-181-1/+0
* board: Rename RSMRST_L_PGOOD as PG_EC_RSMRST_ODLfirmware-chameleon-14280.B-mainDivya Sasidharan2021-10-121-0/+2
* adc: Remove adc_chip.h where adc.h is usedCaveh Jalali2021-08-271-1/+0
* lid_angle: Create a common callback for lid angle changesWai-Hong Tam2021-08-051-4/+2
* syv682x: Fix name for option to disable CC passthroughKeith Short2021-07-101-1/+1
* LED On/Off: Make battery LED optionalDiana Z2021-04-221-4/+5
* thermisor: move header to include dirDawid Niedzwiecki2021-04-221-1/+1
* genvif: Use VIF overrides by defaultAbe Levkoy2021-03-301-0/+3
* Octopus: Re-enable VCONN sourcing from TCPCEric Herrmann2021-03-031-0/+2
* Move tcpic.h header into include/driverSimon Glass2021-01-071-1/+1
* Fleex: enable 2nd ppc source syv682xMatt_Wang2020-11-173-3/+63
* Fleex: Implement new SMP-COS polymer battery parameterMatt_Wang2020-07-232-0/+29
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-6/+3
* Fleex: Reduce switching period in Buck-Boost mode of ISL9238Matt_Wang2020-02-031-1/+20
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-1/+1
* driver: lsm6dsm: Allow building without CONFIG_ACCEL_FIFOYuval Peress2019-11-211-1/+1
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-011-1/+1
* octopus: lock gpio config for reset signalJett Rink2019-10-191-1/+6
* fleex: Change adjust charge max sleep time to 10selthanhuang2019-10-161-0/+11
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-193-3/+3
* Fleex: add grabbiter EMR SKU ID(grob360s)Samsp_Liu2019-08-151-1/+2
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-3/+3
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-3/+3
* Fleex: Set minimum battery level for Try.SRC and resetsDiana Z2019-07-021-0/+10
* driver: lsm6dsm: Move the interrupt GPIO into sensor structYuval Peress2019-05-231-0/+4
* common: led_onoff_states: move forward baseboard led_state to common codeDevin Lu2019-04-202-2/+2
* octopus: correct GPIO - KB_BL_PWR_EN to UNIMPLEMENTEDMarco Chen2019-04-131-2/+2
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-14/+1
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-261-1/+1
* motion: Define macros for custom eventsGwendal Grignou2019-03-201-1/+2
* Fleex: Remove support for board version 0Diana Z2019-03-202-35/+1
* Fleex: Implement new polymer battery parametermatt_wang2019-02-282-0/+177
* driver: lsm6dsm: Integrate LIS2MDL behind LSM6DSMGwendal Grignou2019-02-081-4/+5
* board: indent sensor_motion arraysGwendal Grignou2019-02-081-64/+64
* Fleex: Add new LED state for fully charged in S5Diana Z2019-01-281-0/+1
* drvier: lsm6dsm: Populate Gyroscope scale properlyGwendal Grignou2019-01-191-1/+1
* board/octopus: Notify SoC about USB overcurrentKarthikeyan Ramasubramanian2019-01-171-0/+10
* octopus: convert boards to use hardware intJett Rink2019-01-102-4/+3
* octopus: reduce all octopus sensor fifo sizesJett Rink2019-01-051-6/+0
* Octopus: Increase task stacks on npcx boardsDiana Z2018-12-121-11/+11
* Fleex: add stack analysis annotationsDiana Z2018-12-101-0/+278
* gpio: Add configuration for EC_PCH_RTCRST GPIO in octopus boardsKarthikeyan Ramasubramanian2018-12-051-0/+1
* board/fleex/gpio: Add missing GPIO configuration for Board Id 2Karthikeyan Ramasubramanian2018-11-291-3/+18
* tablet_mode: Introduce hall sensor specific handlingFurquan Shaikh2018-11-292-2/+2
* fleex: update gpio name to latest board revisionstabilize-11306.BJett Rink2018-11-271-3/+3
* ocotpus: move VBUS_ADC config to baseJett Rink2018-11-193-15/+4
* fleex: set PD on unused interruptJett Rink2018-11-161-8/+5
View Lorry Controller Status