summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* servo: Adds logging of panic info to USB consolev2.4.0Brian J. Nemec2020-02-071-0/+7
* ServoMicro: Enable Brownout detection with PVD circuitBrian J. Nemec2020-02-078-4/+82
* c2d2: initial c2d2 addJett Rink2020-01-309-4/+1098
* spi: keep HW SPI module enabled longerJett Rink2020-01-303-13/+28
* spi: add flags to spi configurationJett Rink2020-01-306-6/+17
* stm: add register valuesJett Rink2020-01-301-1/+3
* compile_time_macros: Add GENMASK and GENMASK_ULLCraig Hesling2020-01-304-0/+74
* servo_micro: update UART holding logicJett Rink2020-01-151-30/+9
* puff: disable CONFIG_HIBERNATEPeter Marheine2019-12-181-0/+1
* jinlon: add battery configurationDevin Lu2019-12-182-39/+9
* Revert "servo_v4: remove console command on ToT only"Brian Nemec2019-12-181-4/+0
* common: Add sensor stillness detectorYuval Peress2019-12-189-5/+355
* Revert "kodama/jacuzzi: enable i2c bitbang"Xiyuan Xia2019-12-188-55/+7
* Fix URL for USB-C spec to August updateEric Peers2019-12-171-1/+1
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-1744-72/+76
* common: Format firmware_image linker scriptCraig Hesling2019-12-171-42/+47
* usb_pd: Sending Thunderbolts-compatible host notificationAyushee2019-12-175-1/+104
* Burnside bridge retimer: Add Thunderbolt-compatible mode bitsAyushee2019-12-174-12/+122
* tglrvp: Enable Thunderbolt-compatible modeVijay Hiremath2019-12-171-0/+3
* TCPMv1: Add support for Thunderbolt-compatible modeAyushee2019-12-1710-24/+483
* nucleo-h743zi: Add buttonCraig Hesling2019-12-172-3/+8
* nucleo-h743zi: Add LEDsCraig Hesling2019-12-171-0/+10
* i2c-pseudo: Fix second example I2C transaction in Documentation.txtMatthew Blecker2019-12-171-2/+2
* lick: Add sku id to the board_is_convertibleByes Chuang2019-12-171-1/+1
* Servo: Enable LTO to improve flash spaceBrian J. Nemec2019-12-173-0/+6
* baseboard/kukui: dynamic adjuct input current by thermal budgetYilun Lin2019-12-174-3/+128
* charger/rt946x: expose rt946x_get_adcYilun Lin2019-12-172-10/+19
* baseboard/kukui: request high voltage PDO if battery current dropsYilun Lin2019-12-172-24/+101
* baseboard/kukui: reduce UART_TX buffer size to 4096Eric Yilun Lin2019-12-171-1/+1
* core/riscv-rv32i: Format linker scriptCraig Hesling2019-12-161-221/+228
* core/nds32: Format linker scriptCraig Hesling2019-12-161-213/+217
* core/minute-ia: Format linker scriptCraig Hesling2019-12-161-10/+10
* core/host: Format linker scriptCraig Hesling2019-12-161-117/+117
* cleanup: add prototype incorrectly removedJett Rink2019-12-161-0/+11
* stm32f4: Add registers for DBGMCUCraig Hesling2019-12-161-1/+35
* stm32f4: Fix SBF clear bitCraig Hesling2019-12-161-1/+1
* stm32f4: Cleanup reset reg constantsCraig Hesling2019-12-161-8/+9
* stm32h7: Cleanup reset reg constantsCraig Hesling2019-12-161-8/+12
* cbi: add FW_CONFIG CBI fieldJett Rink2019-12-165-1/+29
* kodama/jacuzzi: enable i2c bitbangTing Shen2019-12-168-7/+55
* i2c: add support for i2c bit-bangingTing Shen2019-12-1611-7/+652
* jinlon: assign power enable pin for FAN2 with proto2Devin Lu2019-12-162-1/+2
* jinlon: remove identifying SKUs for kbbacklit and convertible.Devin Lu2019-12-162-47/+3
* util/kconfig: import linux-5.4.2's kconfigCaveh Jalali2019-12-1439-0/+19987
* puff: Remove CONFIG_BRINGUPAndrew McRae2019-12-141-1/+0
* TCPMv2: Add jittery holdoff timer before sending initial messages in PE_SNK/S...Sam Hurst2019-12-141-124/+212
* ISL9241: Change register settings for OCPEric Herrmann2019-12-141-3/+1
* docs: Fix servo linkNeeraj Poojary2019-12-131-1/+1
* bma255: Fix build dependency for BMA255 accelerometerKeith Short2019-12-131-1/+1
* bma2x2: Add an assert that verifies the mutexKeith Short2019-12-131-0/+3
View Lorry Controller Status