summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* flash_cr50: add support to reboot with the consolestabilize-14026.B-cr50_stabMary Ruthven2021-06-091-4/+33
* tpm_test: drbg_test: add support for using lab vectorsMary Ruthven2021-06-094-33/+245
* tpm_test: add u2f hmac drbg vectorsMary Ruthven2021-06-092-0/+27226
* tpm_test: drbg_test: reformat test to fix too many local variables errorMary Ruthven2021-06-091-27/+76
* tpm_test: drbg_test: save the results in a listMary Ruthven2021-06-091-3/+26
* tpm_test: drbg_test: explicitly state whether to check the resultMary Ruthven2021-06-091-7/+11
* tpm_test: drbg_test: be explicit about output lengthMary Ruthven2021-06-091-6/+7
* hmac_drbg: increase output sizeMary Ruthven2021-06-091-1/+1
* make: fix awk complaintstabilize-14023.B-cr50_stabVadim Bendebury2021-06-041-1/+1
* cr50: move trng.c under CONFIG_DCRYPTO control in chip/g/build.mkstabilize-14013.B-cr50_stabVadim Sukhomlinov2021-06-031-1/+1
* host: fixing make runtestsVadim Sukhomlinov2021-06-034-13/+12
* CRYPTO_TEST: open ccdMary Ruthven2021-05-251-1/+1
* H1_RED_BOARD: force rddkeepaliveMary Ruthven2021-05-251-0/+4
* flash_cr50: wait up to 15 seconds for EC cutoffMary Ruthven2021-05-211-2/+9
* gsctool: add flags from ti50 repostabilize-13983.B-cr50_stabstabilize-13982.88.B-cr50_stabstabilize-13982.82.B-cr50_stabstabilize-13982.70.B-cr50_stabstabilize-13982.69.B-cr50_stabstabilize-13982.60.B-cr50_stabstabilize-13982.51.B-cr50_stabstabilize-13974.B-cr50_stabrelease-R92-13982.B-cr50_stabJett Rink2021-05-141-0/+2
* cr50: prepare to release 0.{5,6}.30Mary Ruthven2021-05-142-2/+2
* cr50: debounce successive TPM reset pulses (take two)stabilize-13971.B-cr50_stabstabilize-13970.B-cr50_stabMary Ruthven2021-05-111-5/+10
* CRYPTO_TEST_SETUP: enable dev featuresMary Ruthven2021-05-072-1/+4
* CRYPTO_TEST_SETUP: enable the tpmMary Ruthven2021-05-071-3/+3
* CRYPTO_TEST_SETUP: remove ap ro verification and spi hashMary Ruthven2021-05-071-0/+4
* CRYPTO_TEST_SETUP: remove unnecessary commandsMary Ruthven2021-05-071-0/+15
* add CONFIG_CMD_ROLLBACKMary Ruthven2021-05-073-1/+3
* add CONFIG_SPI_HASHMary Ruthven2021-05-073-6/+15
* isolate CONFIG_AP_RO_VERIFICATIONMary Ruthven2021-05-072-0/+4
* add CONFIG_CMD_GPIOCFGMary Ruthven2021-05-072-0/+3
* add CONFIG_CMD_PINMUXMary Ruthven2021-05-072-0/+3
* add CONFIG_CMD_DUMP_NVMEMMary Ruthven2021-05-072-0/+3
* add CONFIG_CMD_WPMary Ruthven2021-05-072-0/+3
* add CONFIG_CMD_SYSRSTMary Ruthven2021-05-072-9/+12
* add CONFIG_CMD_ECRSTMary Ruthven2021-05-072-0/+3
* signer: advance version and erase new bit in rollback mapMary Ruthven2021-05-042-4/+4
* flashrom: remove --fast-verify from documentationDaniel Campello2021-04-301-1/+1
* ccdstate: displays "CCD_MODE" instead of "CCD EXT" fieldstabilize-RUST-13932.B-cr50_stabstabilize-13942.B-cr50_stabstabilize-13935.B-cr50_stabNamyoon Woo2021-04-221-3/+1
* ccdstate: add 'KeepAlive' line in outputNamyoon Woo2021-04-212-5/+5
* i2cp: fix read chunk processingfactory-13929.B-cr50_stabMary Ruthven2021-04-191-1/+3
* cr50: prepare to release 0.{5,6}.10Mary Ruthven2021-04-192-2/+2
* remove serialno commandstabilize-quickfix-13904.98.B-cr50_stabstabilize-glibc-13901.B-cr50_stabstabilize-coil-13902.B-cr50_stabstabilize-13904.67.B-cr50_stabstabilize-13904.66.B-cr50_stabstabilize-13904.62.B-cr50_stabstabilize-13904.59.B-cr50_stabstabilize-13904.58.B-cr50_stabstabilize-13904.55.B-cr50_stabstabilize-13904.49.B-cr50_stabstabilize-13904.48.B-cr50_stabstabilize-13904.47.B-cr50_stabstabilize-13904.44.B-cr50_stabstabilize-13904.43.B-cr50_stabstabilize-13904.42.B-cr50_stabstabilize-13904.41.B-cr50_stabstabilize-13904.34.B-cr50_stabrelease-R91-13904.B-cr50_stabMary Ruthven2021-04-061-22/+0
* add 'atboot' arg to rddkeepalivestabilize-13895.B-cr50_stabMary Ruthven2021-04-014-4/+26
* make rddkeepalive read-only when console is lockedMary Ruthven2021-04-011-4/+4
* ec-comm: make EC_PACKET_MODE_EN a wake source in all statesMary Ruthven2021-04-012-3/+3
* ccd_config: clarify the definition of public flagsMary Ruthven2021-04-011-1/+6
* gsctool: use dauntless vid:pid as default for d2 imagesJett Rink2021-03-231-12/+12
* docs/case_closed_debugging_cr50: Expand ccd open instructionsstabilize-rust-13836.B-cr50_stabstabilize-quickfix-13816.67.B-cr50_stabstabilize-LTS-13816.60.B-cr50_stabstabilize-13856.B-cr50_stabstabilize-13851.B-cr50_stabstabilize-13836.B-cr50_stabstabilize-13821.B-cr50_stabstabilize-13816.82.B-cr50_stabstabilize-13816.80.B-cr50_stabstabilize-13816.64.B-cr50_stabstabilize-13816.63.B-cr50_stabstabilize-13816.55.B-cr50_stabstabilize-13816.53.B-cr50_stabstabilize-13816.51.B-cr50_stabstabilize-13816.40.B-cr50_stabrelease-R90-13816.B-cr50_stabDavid Stevens2021-02-261-3/+4
* cleanup: remove unnecessary image size paddingJett Rink2021-02-191-4/+2
* gsctool: use SHA256 digest for D2 instead of SHA1Jett Rink2021-02-191-19/+60
* gsctool: drop logic for non-background supportJett Rink2021-02-191-37/+10
* u2f: Move some u2f logic to common/ for testingYicheng Li2021-02-184-102/+110
* flash_cr50: add c2d2 to allowable servo typesstabilize-rust-13795.B-cr50_stabstabilize-13799.B-cr50_stabMary Ruthven2021-02-091-1/+1
* cr50: prepare to release 0.{5,6}.9stabilize-rust-13776.B-cr50_stabstabilize-13768.B-cr50_stabMary Ruthven2021-02-022-2/+2
* trng: change TRNG_EMPTY_COUNT to 0x7ffMary Ruthven2021-02-021-4/+5
View Lorry Controller Status