summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* morphius: Allow MST hub to control HPD for OPT3 DBstabilize-13360.B-masterEdward Hill2020-07-182-12/+10
* madoo: Initial EC imageKo_Ko2020-07-188-0/+1164
* servo_v4p1: Add TUSB1064 functionalitySam Hurst2020-07-184-0/+96
* retimer/tusb544: set the HPD pin for DP/Dock modeDivagar Mohandass2020-07-181-3/+7
* TCPMv2: Add thunderbolt entry flow for active cableli feng2020-07-183-56/+248
* Ezkinil: Compatible with v2 boardSue Chen2020-07-183-5/+36
* battery: Fix obtaining battery manufacture dateWai-Hong Tam2020-07-172-6/+6
* zork: Use CBI only and remove retimer probe codeDenis Brockus2020-07-177-73/+1
* Dedede: Retrieve FW_CONFIG from CBI at higher priorityDiana Z2020-07-171-1/+1
* woomax: Initialize the vivaldi keyboardMichael5 Chen2020-07-172-0/+39
* dedede: add FW_CONFIG field for tablet mode present or notDevin Lu2020-07-172-0/+17
* drawcia: Check interrupt lines during initDevin Lu2020-07-171-2/+12
* zork: Enable 65W/3.25A PD adapter.Lu Zhang2020-07-171-2/+2
* Puff: Remove CONFIG_SYSTEM_UNLOCKEDAndrew McRae2020-07-171-4/+0
* SM5803: Update initsDiana Z2020-07-171-0/+9
* TCPMv2: Add common function for DPM entry and exit modeAyushee2020-07-174-43/+22
* TCPMv2: Add common exit mode for all the alternate modesAyushee2020-07-1711-74/+139
* TCPMv2: Add USB4 mode support for passive cableAyushee2020-07-177-2/+356
* syv682X: Add support for FRSEric Herrmann2020-07-171-9/+105
* USB PD: Move board FRS configuration out of TCPCIEric Herrmann2020-07-177-13/+20
* morphius: update battery led on/off levelZick Wei2020-07-162-4/+4
* usb_ppc: Fix broken tests buildAbe Levkoy2020-07-161-5/+11
* asurada: gpio.inc cleanupTing Shen2020-07-161-27/+10
* asurada_scp: enable hostcmdTzung-Bi Shih2020-07-162-0/+4
* chip/mt8192_scp: support hostcmd over IPITzung-Bi Shih2020-07-164-0/+147
* asurada_scp: enable basic IPITzung-Bi Shih2020-07-161-0/+19
* delbin: Implement the EC LED code.Michael5 Chen2020-07-164-118/+88
* CBI: Add ectool command to remove board infoCheng-Han Yang2020-07-161-2/+27
* Waddledoo: Only set HDMI enable when HDMI DB is presentDiana Z2020-07-161-2/+4
* drawcia: remove TCPCI REV2.0 support for C1 portDevin Lu2020-07-161-1/+0
* servo_v4p1: Add USB PD functionalitySam Hurst2020-07-166-3/+1667
* servo: Increased stack sizes for servo_v4Brian J. Nemec2020-07-161-3/+3
* morphius: support aoz ppc onlyZick Wei2020-07-151-4/+1
* hammer: Add touchpad support for moonballChen-Tsung Hsieh2020-07-151-1/+7
* Puff: Delay turning off LED during shutdown.Andrew McRae2020-07-151-3/+31
* boten: define power and battery led behaviorxiong.huang2020-07-153-65/+98
* boten: split CONFIG_LED_PWM out into boardsxiong.huang2020-07-157-2/+9
* boten: add battery informationxiong.huang2020-07-152-259/+46
* lingcod: Initial EC imagehao.zhou2020-07-158-0/+1152
* woomax: add HDMI_POWER_EN_DB to NCT3807Michael5 Chen2020-07-152-35/+16
* tcpmv2: Add usb_tcpmv2_tcpci testEdward Hill2020-07-1510-1/+360
* Endeavour: Update thermal tableDavid Huang2020-07-151-13/+13
* voxel: reconfig GPIO and enable/disable USB-A powerBen Chen2020-07-153-1/+15
* vilboz: fix rotation matrixLu Zhang2020-07-141-1/+7
* boten: enable CONFIG_CHARGE_RAMP_HWxiong.huang2020-07-141-0/+1
* asurada: enable usb ports power controlTing Shen2020-07-143-1/+11
* asurada: enable PSYS ADCEric Yilun Lin2020-07-141-0/+3
* asurada: fix PPC vconn controlEric Yilun Lin2020-07-141-0/+7
* chip/mt8192_scp: support IPI handlerTzung-Bi Shih2020-07-146-2/+155
* driver/tcpm: set PD_EVENT_RX_HARD_RESET event when receive hard resetRuibin Chang2020-07-145-11/+9
View Lorry Controller Status