summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* trondo: Initial EC imagestabilize-13070.B-masterDavid Wu2020-04-309-0/+1226
* ampton: change sku id 3,4 for g-sensor BMA253 in the lidJames_Chao2020-04-303-12/+43
* HACK: jinlon: Prevent system can't power onDevin Lu2020-04-301-0/+22
* berknip: Initial EC imageZick Wei2020-04-308-0/+868
* it8xxx(iteflash): Support KGD FlashDonald Huang2020-04-301-14/+255
* Wheelie: Initial EC imageTommie Lin2020-04-308-0/+1264
* jinlon: Reduce input voltage to 5V when battery fullDevin Lu2020-04-301-1/+28
* tcpci: display when we send/receive Hard ResetDenis Brockus2020-04-301-0/+12
* tcpmv2: SNK HardReset cleanupDenis Brockus2020-04-305-18/+61
* Jinlon: Select CONFIG_KEYBOARD_REFRESH_ROW3Rajat Jain2020-04-301-0/+1
* SM5803: Only enable auto charging when battery is presentDiana Z2020-04-301-3/+6
* Waddledee: Increase PDCMD task sizeDiana Z2020-04-301-1/+1
* usb_pd: Correct processing discover SVIDAyushee2020-04-291-3/+3
* raa489000: Bit 7 of control3 is to enable autonomous chargingMarco Chen2020-04-291-1/+6
* TCPMv2: Signal to TC Layer that PR Swap is complete on state exitSam Hurst2020-04-292-3/+14
* TCPMv2: Add dump pd command needed by PD_FAFTSam Hurst2020-04-296-6/+106
* ioexpander/it8801: to avoid causing cache to reset when EC is resettim2020-04-291-12/+22
* kakadu: implementation of Vconn boostScott Chao2020-04-291-2/+2
* Button: Add unit tests for simulated button presspandeyan2020-04-292-0/+135
* it83xx/adc: enabled GPIO alternate mode by default for pin into gpio.inc mark...tim2020-04-298-57/+26
* Zork: Configure GPIO86 EC_H1_PACKET_MODE lowEdward Hill2020-04-296-24/+6
* stm32: Enable more on-device unit testsTom Hughes2020-04-295-5/+45
* TCPMv2: Exit PE_VCS_Send_Ps_Rdy_Swap after Accept receivedDiana Z2020-04-291-32/+38
* TCPMv2: Set AMS start for messages in pe_attempt_port_discoveryDiana Z2020-04-291-0/+9
* Zork: Move charger I2C to match HW changeEdward Hill2020-04-299-34/+71
* SM5803: Share setting of FLOW_REG1 between tasks betterDiana Z2020-04-281-9/+20
* TCPMv1: skip cable probing when not VCONN sourceKeith Short2020-04-283-30/+15
* Ampton: assert RSMRST to PCH while force shutdownDino Li2020-04-281-0/+14
* damu: correct battery i2c portScott Chao2020-04-281-1/+1
* power/mt8183: fix power btn behavior for clamshell devicesTing Shen2020-04-281-0/+4
* sm5803: Fix interrupt enable bugAseda Aboagye2020-04-281-1/+1
* malefor: turn off USB4 and Thunderbolt supportxiong.huang2020-04-284-34/+13
* malefor: define led behaviorxiong.huang2020-04-284-100/+96
* volteer: move the PWM configuration and LED support from baseboard to boardsxiong.huang2020-04-2815-68/+405
* it8xxx2: lpc/espi: mapping host I/O cycle to h2ram sectionDino Li2020-04-283-0/+16
* TCPMv2: Return after set_state in READY statesDiana Z2020-04-281-15/+23
* USB4: Correct getting product type from VDOAyushee2020-04-282-6/+14
* tests/kb_8042: Add vivaldi keyboard testsRajat Jain2020-04-271-0/+70
* Raa489000: fix VBUS voltage registerKo_Ko2020-04-271-1/+1
* docs: Remove firmware code review guidelinesAbe Levkoy2020-04-271-102/+7
* kakadu: update led pwm dutyScott Chao2020-04-271-2/+2
* kakadu: fix firmware_ECCharging failedScott Chao2020-04-271-1/+1
* garg: add HDMI SKU IDDevin Lu2020-04-271-1/+1
* damu: enlarge CHARGER task stack to 1024 bytesPaul Ma2020-04-271-1/+1
* ioexpander: set GPIO only when real setLu Zhang2020-04-271-1/+1
* dalboz: let i2c control ps8743 DP/USB/FLIP selectionPaul Ma2020-04-261-0/+21
* jinlon: Enable multi-profile DPTFDevin Lu2020-04-251-0/+1
* jinlon: set rpm deviation to 1%Devin Lu2020-04-251-0/+1
* TCPMv2: Cleanup pd_set_dual_role() eventsEdward Hill2020-04-251-26/+25
* sm5803: Add trigger for board_vbus_present_changeAseda Aboagye2020-04-251-3/+7
View Lorry Controller Status