summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* Clear OWNERS for factory/firmware branchfirmware-mistral-12422.BBrian Norris2021-09-106-21/+0
* stm32: Fix manual interrupt clearing functionCraig Hesling2020-03-161-1/+3
* octopus: reduce USB-C source current to 1.5Alu.zhang2019-08-131-1/+0
* ppc: initialize vbus current limit on initJett Rink2019-08-131-0/+9
* motion: bh1730: use 1K scale for d1_1k/d0_1kJongpil Jung2019-08-131-1/+3
* kohaku: Update tuned parameters to get lux from BH1733Jongpil Jung2019-08-131-12/+20
* gsctool: print devid in image version outputMary Ruthven2019-08-131-0/+24
* gsctool: add support for endorsement seed vcMary Ruthven2019-08-131-3/+85
* g: add vendor cmd to get/set the endorsement seedMary Ruthven2019-08-133-1/+66
* gsctool: make options mutually exclusiveMary Ruthven2019-08-131-2/+3
* kohaku: add TEMP_SENSOR_3 and TEMP_SENSOR_4 to DPTFPaul Fagerburg2019-08-133-2/+47
* driver: lis2dw12: Add driver supportmario tesi2019-08-137-0/+789
* hatch: update for 30.9K resistor in thermistor dividerPaul Fagerburg2019-08-136-9/+9
* cleanup: change initializer for storm_trackerJett Rink2019-08-131-1/+1
* Trembyle: Change port 1 PPC to NX20P3483Denis Brockus2019-08-132-5/+6
* dma: separate out DMA enable status from wait_for_bytesTom Hughes2019-08-137-28/+64
* npcx: i2c: adjust i2c bus frequency when it is set to 100kHz.Mulin Chao2019-08-121-2/+2
* cbi-util: Remove OEM_ID from required fieldsPhilip Chen2019-08-121-6/+4
* Trembyle: Set GPIO pullup and voltageEdward Hill2019-08-121-12/+10
* kohaku: update for 30.9K resistor in thermistor dividerPaul Fagerburg2019-08-122-3/+3
* thermistor: update Steinhart-Hart equationsPaul Fagerburg2019-08-123-1/+54
* hatch: SLP_S3/S4 sideband signals guarded with wrong configKeith Short2019-08-129-9/+4
* kukui: Check IRQ and HPD in DPStatus message.Pi-Hsun Shih2019-08-121-1/+1
* hammer: Add masterball boardNicolas Boichat2019-08-123-1/+14
* hammer: Refactor config options to support more variantsNicolas Boichat2019-08-125-69/+108
* cr50: use dedicated region for info1 accessesVadim Bendebury2019-08-106-115/+16
* flash_ec: removing the bandaid fix on setting i2c_mux for npcx_uutNamyoon Woo2019-08-101-17/+1
* usb: convert cc1 from int to enumJett Rink2019-08-0918-57/+73
* usb: fix issue with CC line interpretation as DTSJett Rink2019-08-091-8/+6
* test: use new TEST_EQ for usb testsJett Rink2019-08-091-286/+275
* test: make TEST_EQ and TEST_NE use %d as formatJett Rink2019-08-091-2/+2
* flash_ec: die explicitly on error casesNamyoon Woo2019-08-091-18/+34
* doc: switch to markdown anchorsKeith Short2019-08-092-30/+30
* doc: Add documentation for EC termsKeith Short2019-08-093-4/+164
* g: Make DMEM word writes explicitLouis Collard2019-08-091-85/+104
* kohaku: Change location for bh1730 ALSScott Collyer2019-08-092-5/+5
* hatch: Allow data role swaps when EC is in ROScott Collyer2019-08-091-9/+2
* pi3usb9201: Add EC console log for host CDP mode settingScott Collyer2019-08-091-1/+3
* Trembyle: enable throttle ap to allow the system to use fanDenis Brockus2019-08-082-1/+4
* Zork: cleanup USBC related arraysKeith Short2019-08-081-4/+7
* isl9241: add charger_get_vbus_voltageDenis Brockus2019-08-085-8/+53
* kodama: Initial image copied from kukuilu.zhang2019-08-089-1/+1110
* Trembyle: add fan supportDenis Brockus2019-08-083-0/+84
* baseboard/kukui: refactor smart battery codeTing Shen2019-08-085-53/+60
* akemi: add initial content for the buildPeichao Wang2019-08-087-0/+1003
* treeya: remove keyboard backlightlu.zhang2019-08-083-31/+3
* treeya: add power led and change battery led behaviorlu.zhang2019-08-083-50/+61
* pd: Don't request LPM in DRP_TOGGLE if cc is not openScott Collyer2019-08-081-3/+6
* makefile: remove print-chip-variantJack Rosenthal2019-08-071-5/+0
* touchpad_elan: Add missing tablet_mode.h includeNicolas Boichat2019-08-071-0/+1
View Lorry Controller Status