summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* kalista: Increase fan to reduce throttling.firmware-kalista-11343.BRichard Yeh2023-01-301-59/+33
* fan: Rewrite and test the most common custom fan_percent_to_rpm.Richard Yeh2023-01-303-13/+237
* Clear OWNERS for factory/firmware branchBrian Norris2021-09-102-10/+1
* stm32: Fix manual interrupt clearing functionCraig Hesling2020-03-161-1/+3
* driver: bmi160: Check enable_fifo flags before processing FIFOGwendal Grignou2019-05-081-13/+13
* Kalista: PMIC TPS650830 VR1 setting for hang up issueSue Chen2019-03-262-0/+10
* Kalista: Set LED in HOOK_INITSue Chen2019-03-261-0/+15
* karma: correct the fan_tableSue Chen2019-02-271-8/+8
* OZ554: set power up sequence.Ryan Zhang2019-02-272-1/+19
* Karma: Add PANEL_LM_SSK1 panel settings to OZ554Sue Chen2019-01-303-3/+41
* oz554: Add oz554_set_config APISue Chen2019-01-302-5/+32
* USB-PD: Disable Vconn on SRC_DISCONNECTDaisuke Nojiri2019-01-161-1/+4
* oz554: Keep interrupt always enabledDaisuke Nojiri2019-01-081-8/+13
* Karma: add new GPIORyan Zhang2019-01-081-1/+1
* system: Make system_can_boot_ap return true for AC-only systemsDaisuke Nojiri2018-12-251-16/+14
* karma: fix ec build errorZhuohao Lee2018-12-243-116/+0
* USB-PD: Don't make charge_manager save log if it's not presentDaisuke Nojiri2018-12-241-0/+2
* karma: update thermal tableSue Chen2018-12-221-11/+11
* Karma: Enable 3A power supply over USB-C portDaisuke Nojiri2018-12-211-1/+1
* Kalista: Remove charger and USB-PD DRP supportDaisuke Nojiri2018-12-214-154/+5
* oz554: Move oz554 driver code to common directoryDaisuke Nojiri2018-12-216-0/+127
* USB-PD: Fix build errors for non-DRPDaisuke Nojiri2018-12-211-2/+8
* Kalista: Write panel settings to OZ554Tino Liu2018-12-204-1/+117
* npcx7_evb: illustrate the flash configuration of npcx7m6fcCHLin2018-12-042-4/+18
* nocturne: Log base power fault cause.Aseda Aboagye2018-12-041-1/+2
* cr50_fuzz: Disable this fuzz target until chromeos-ec is fixed.Allen Webb2018-12-041-1/+2
* servo_micro: Increase maximum I2C-over-USB write and read sizes.Matthew Blecker2018-12-041-0/+35
* wov: Modify wov_set_gain to update gain params in wov_confScott Collyer2018-12-041-0/+3
* wov: Split i2s_set_config into 2 functionsScott Collyer2018-12-042-11/+34
* wov: Fix mispelling of wov_conf right_chan_gainScott Collyer2018-12-042-2/+2
* wov: Detect I2S overrun/underrun burstsScott Collyer2018-12-041-0/+46
* ISH-i2c: support 1MHz, clock stretch, restartKyoung Kim2018-12-033-84/+158
* ec3po: use a copy of the logger objectMary Ruthven2018-12-032-2/+8
* Kasumi: add new batteryryan.zhang2018-12-032-0/+29
* Ampton: change the port0 mux to PS8751James_Chao2018-12-035-6/+46
* PD: Ensure SVID parsing doesn't exceed packet boundariesDiana Z2018-12-031-2/+10
* Octopus: allow data role swapping in RODiana Z2018-12-031-11/+3
* chgstv2: Fix battery_near_full() with full batteryEdward Hill2018-12-031-1/+1
* Nami: Add battery AP18F4M for Bard and EkkoDavid Huang2018-12-032-8/+51
* cr50_fuzz: Add self test.Allen Webb2018-12-031-0/+44
* cr50_fuzz: Add libprotobuf-mutator support.Allen Webb2018-12-0310-61/+1025
* gsctool: verbose flag should print debug messagesJoel Kitching2018-12-031-8/+11
* gsctool: correct a typoJoel Kitching2018-12-031-1/+1
* sensor: Adjust max_frequency based on EC performanceGwendal Grignou2018-12-0316-20/+46
* power/rk3399: Remove unused power_seq_versionPhilip Chen2018-12-013-19/+13
* Delete unused MAX_BYTES_IN_ONE_READING from usb_i2c.cMatthew Blecker2018-12-011-1/+0
* tablet_mode: Fix tablet mode for tablet devicesNicolas Boichat2018-12-018-22/+7
* motion_sense: Remove global fifo_flush_needed, redundantstabilize-octopus-11316.38.Bstabilize-octopus-11316.37.Bstabilize-11316.37.Bstabilize-11316.35.BGwendal Grignou2018-11-291-7/+4
* octopus: remove OCM erase commandJett Rink2018-11-292-15/+0
* Nami: Remove local oem variableDaisuke Nojiri2018-11-291-5/+1
View Lorry Controller Status