summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* bq25710: Do not soft reset when running out of RW imagefirmware-hatch-12672.117.BScott Collyer2020-03-091-14/+18
* common/keyboard_8042: When pressed, print F11-F15 for debugRajat Jain2020-03-052-7/+7
* hatch/baseboard: Enable the Search key button in maskRajat Jain2020-03-051-1/+1
* common/keyboard_8042: Fix the Search key row/colRajat Jain2020-03-051-1/+1
* hatch: Enable extpwrlimit option in ectoolShelley Chen2020-02-271-0/+1
* Reland "keyboard_scan: detect inconsistent state in read_matrix"Shelley Chen2020-02-271-17/+48
* ps8xxx: Only apply PS8751 DRP disabled CC status workaround to PS8751.Matthew Blecker2020-02-241-18/+24
* jinlon: Increase CONFIG_POWER_BUTTON_INIT_TIMEOUTDevin Lu2020-02-211-0/+7
* dratini: Increase CONFIG_POWER_BUTTON_INIT_TIMEOUTTim Wawrzynczak2020-02-211-0/+7
* kohaku: Modify TCPC register MUX_DP_EQ_Configuration setting on MB port.Shelley Chen2020-02-211-0/+11
* hatch: Add check for convertible SKUs in lid_angle_peripheral_enableTim Wawrzynczak2020-02-189-5/+51
* akemi: Enable TI BQ40Z5 series FW workaroundTim Wawrzynczak2020-02-181-0/+11
* akemi: remove CONFIG_SYSTEM_UNLOCKED, enable CONFIG_USB_PD_COMM_LOCKEDxiaoqiang.zhu2020-02-181-3/+1
* chgramp: Don't ramp DTS suppliers above advertisementAseda Aboagye2020-02-181-9/+6
* Kindred: Fix reset trigger even system force to G3.David Huang2020-02-073-7/+16
* hatch: Define CONFIG_MKBP_EVENT_WAKEUP_MASK as 0Tim Wawrzynczak2020-02-062-3/+4
* helios: Modify TCPC register MUX_DP_EQ_Configuration setting on MB port.Michael5 Chen2020-02-051-3/+10
* dratini: change thermal configuration for DVTDevin Lu2020-01-311-7/+7
* jinlon: add dual fan control by ecDevin Lu2020-01-318-10/+265
* USB PD: set last rx'd msg ID as invalid before executing soft resetTim Wawrzynczak2020-01-301-0/+1
* hatch: Use GPIO and host event when generating MKBP eventsTim Wawrzynczak2020-01-301-1/+1
* kohaku : set CONFIG_CHARGER_BQ25710_IDCHG_LIMIT_MA to 6144YongBeum.Ha2020-01-291-1/+1
* driver/temp_sensor: add support OTI502 temperature sensorDevin Lu2020-01-284-0/+96
* jinlon: enable OTI502 IR temperature sensorDevin Lu2020-01-224-0/+14
* kohaku: Define CONFIG_MKBP_EVENT_WAKEUP_MASK as 0Tim Wawrzynczak2020-01-221-0/+3
* bq25710: Check battery disconnect state prior to enabling ICO modeScott Collyer2020-01-211-2/+4
* ectool: Fix ectool motionsense info commandTim Wawrzynczak2020-01-201-1/+1
* ps8xxx: Add workaround for PS8751 FW ver 0x44.Tim Wawrzynczak2020-01-151-1/+32
* npcx: Do not reload the OFMCLK when system-jumpCHLin2020-01-151-12/+19
* bq25710: Ensure low power mode is disabled when reading reg 0x3EScott Collyer2020-01-141-2/+17
* usb pd: Don't force VSafe5V when there is no active charge portScott Collyer2020-01-141-4/+15
* anx7447: Fix CC and polarity settingsTim Wawrzynczak2020-01-101-3/+30
* TCPCI: Follow spec, as done in ToT.Tim Wawrzynczak2020-01-101-0/+14
* Kindred: Add workaround for TI TPS51486RJER when system resumeDavid Huang2020-01-103-0/+36
* akemi: enable quick charge when power offxiaoqiang.zhu2020-01-101-0/+43
* Reland "tcpci: tcpci_tcpm_set_polarity should not clobber"Denis Brockus2020-01-091-2/+4
* usb_pd: request preferred voltage PDO (REDO)Tim Wawrzynczak2020-01-093-7/+221
* i2c: always write on read/modify/writeDenis Brockus2020-01-091-30/+18
* Revert "tcpci: tcpci_tcpm_set_polarity should not clobber"Tim Wawrzynczak2020-01-081-18/+2
* TCPMv2: Add BC1.2 trigger eventsDenis Brockus2020-01-082-2/+54
* tcpci: nct38xx: make get cc standard under tcpciDenis Brockus2020-01-082-41/+48
* TCPMv2: Add unattached polarityDenis Brockus2020-01-081-17/+47
* TCPMv2: Allow for Auto Discharge DisconnectDenis Brockus2020-01-081-0/+12
* tcpci: Only drive one CC line when attachedDenis Brockus2020-01-0816-189/+316
* kohaku: tcs3400: update coeffs for als and rgb sensorMengqi Guo2020-01-061-15/+15
* stryke: remove ALS supportJosh Tsai2020-01-033-95/+1
* Kindred: fix rotation matrices of base accel configben.chen2@quanta.corp-partner.google.com2019-12-271-1/+1
* drivers/tcs3400: don't apply zero scale.Jongpil Jung2019-12-271-0/+4
* boards: Make firmware branch build again (some boards ran out of space)Tim Wawrzynczak2019-12-268-160/+23
* common: accelgyro: Add read temperature function to driverYuval Peress2019-12-261-0/+10
View Lorry Controller Status