summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* Clear OWNERS for factory/firmware branchfactory-excelsior-12812.B-masterBrian Norris2021-09-108-28/+0
* nami_fp: Replace individual symlinks with directory symlinkTom Hughes2020-01-048-7/+1
* cr50: Add support for ACVP tests of HMAC implementationsVadim Sukhomlinov2020-01-042-92/+184
* USB PD: Consider DFET of battery when refrain from snk_resetMarco Chen2020-01-041-2/+4
* kohaku: tcs3400: update coeffs for als and rgb sensorMengqi Guo2020-01-031-15/+15
* dedede: Add initial baseboard skeletonAseda Aboagye2020-01-033-0/+73
* cbi: Add support for CONFIG_WP_ACTIVE_HIGHAseda Aboagye2020-01-031-0/+4
* npcx: Add support for CONFIG_WP_ACTIVE_HIGHAseda Aboagye2020-01-031-0/+12
* docs/fingerprint: Update for Dragonclaw Rev 0.2Tom Hughes2020-01-036-22/+32
* bloonchipper: Update GPIOs for Hatch 3.0 designTom Hughes2020-01-031-7/+9
* kukui_scp: drop unused interruptsEric Yilun Lin2020-01-032-21/+0
* puff: accept switch to CHARGE_PORT_NONEPeter Marheine2020-01-031-2/+12
* puff: ensure barrel jack removal is detectedPeter Marheine2020-01-031-1/+1
* puff: Enable type C power source when requested.Andrew McRae2020-01-031-0/+22
* puff: Remove ANX7447 OCM flash erase support.Andrew McRae2020-01-031-1/+0
* cr50: update size checks for U2F_ATTESTAndrey Pronin2020-01-031-2/+2
* cr50: add checks to U2F_ATTESTAndrey Pronin2020-01-031-3/+34
* driver: lsm6dsm: Implement temperature readingYuval Peress2020-01-032-0/+18
* driver: bmi160: Implement temperature readingYuval Peress2020-01-021-0/+6
* puff ec: Enable all GPIO interruptsAndrew McRae2020-01-021-0/+8
* Kukui: Fix shutdown battery can't do pre-chargeDavid Huang2019-12-311-12/+15
* dood: Add battery informationyu-an.chen2019-12-312-0/+90
* puff: prevent AP boot when there isn't enough powerPeter Marheine2019-12-316-56/+85
* puff: EC TCPC and TCPPC interrupts are not enabled.Andrew McRae2019-12-311-0/+3
* puff: support switching between USB-C and barrel jack powerPeter Marheine2019-12-313-2/+104
* puff: correctly detect vbus presence on USB-CPeter Marheine2019-12-311-1/+1
* ccd: add information about AP flash programming speed up.Vadim Bendebury2019-12-301-0/+78
* Kodama: limit the max input current as 2Axiong.huang2019-12-301-0/+4
* dood: Change LED Pin Output Typeyu-an.chen2019-12-301-2/+2
* stryke: remove ALS supportJosh Tsai2019-12-303-95/+1
* Kindred: fix rotation matrices of base accel configben.chen2@quanta.corp-partner.google.com2019-12-271-1/+1
* drivers/tcs3400: don't apply zero scale.Jongpil Jung2019-12-271-0/+4
* jacuzzi: enable ledTing Shen2019-12-277-7/+238
* led_pwm: support different pwm modulesTing Shen2019-12-278-39/+64
* zork: Detect PS8802 or PS8818 retimer for USB-C1Edward Hill2019-12-263-3/+60
* retimer: Add PS8802 driverEdward Hill2019-12-264-0/+105
* jslrvp: add Jasperlake RVP supportDivagar Mohandass2019-12-268-0/+439
* kappa: enlarge stack for hook_taskDevin Lu2019-12-251-1/+1
* power: add support for Jasperlake chipsetDivagar Mohandass2019-12-253-9/+8
* foob : add convertible check by sku_idxiaoqiang.zhu2019-12-241-1/+1
* driver/usb_mux: add ANX7440 USB Type-C mux driverDivagar Mohandass2019-12-245-0/+154
* rt946x: polish charger log formatEric Yilun Lin2019-12-241-5/+6
* kodama: overwrite bad battery params to known good valueTing Shen2019-12-235-0/+88
* virtual_battery: return errors on bad battery flagsTing Shen2019-12-231-0/+18
* puff: Change default EC GPIO to enable MST.Andrew McRae2019-12-231-1/+1
* chip/it8xxx2: Don't let internal flash go into deep power down modeDino Li2019-12-233-0/+28
* dratini: assign SKUIDs for DVTDevin Lu2019-12-221-5/+8
* dratini: override battery LEDs to indicate system suspendDevin Lu2019-12-223-1/+26
* mushu: Create initial buildBob Moragues2019-12-217-0/+1026
* zork: Enable PS8818 retimer for USB-C1Edward Hill2019-12-202-0/+5
View Lorry Controller Status