diff options
Diffstat (limited to 'zephyr/projects/nissa/nivviks/power_signals.dtsi')
| -rw-r--r-- | zephyr/projects/nissa/nivviks/power_signals.dtsi | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/zephyr/projects/nissa/nivviks/power_signals.dtsi b/zephyr/projects/nissa/nivviks/power_signals.dtsi new file mode 100644 index 0000000000..1d2b23069d --- /dev/null +++ b/zephyr/projects/nissa/nivviks/power_signals.dtsi @@ -0,0 +1,220 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + chosen { + intel-ap-pwrseq,espi = &espi0; + }; + + common-pwrseq { + compatible = "intel,ap-pwrseq"; + + sys-pwrok-delay = <10>; + all-sys-pwrgd-timeout = <20>; + }; + + pwr-en-pp5000-s5 { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "PP5000_S5 enable output to regulator"; + enum-name = "PWR_EN_PP5000_A"; + gpios = <&gpio4 0 0>; + output; + }; + pwr-en-pp3300-s5 { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "PP3300_S5 enable output to LS"; + enum-name = "PWR_EN_PP3300_A"; + gpios = <&gpiob 6 0>; + output; + }; + pwr-pg-ec-rsmrst-od { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "RSMRST power good from regulator"; + enum-name = "PWR_RSMRST"; + gpios = <&gpio9 4 0>; + interrupt-flags = <GPIO_INT_EDGE_BOTH>; + }; + pwr-ec-pch-rsmrst-odl { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "RSMRST output to PCH"; + enum-name = "PWR_EC_PCH_RSMRST"; + gpios = <&gpioa 6 0>; + output; + }; + pwr-slp-s0-l { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "SLP_S0_L input from PCH"; + enum-name = "PWR_SLP_S0"; + gpios = <&gpio9 7 GPIO_ACTIVE_LOW>; + interrupt-flags = <GPIO_INT_EDGE_BOTH>; + }; + pwr-slp-s3-l { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "SLP_S3_L input from PCH"; + enum-name = "PWR_SLP_S3"; + gpios = <&gpioa 5 GPIO_ACTIVE_LOW>; + interrupt-flags = <GPIO_INT_EDGE_BOTH>; + }; + pwr-slp-sus-l { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "SLP_SUS_L input from PCH"; + enum-name = "PWR_SLP_SUS"; + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + interrupt-flags = <GPIO_INT_EDGE_BOTH>; + }; + pwr-ec-soc-dsw-pwrok { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "DSW_PWROK output to PCH"; + enum-name = "PWR_EC_SOC_DSW_PWROK"; + gpios = <&gpio6 1 0>; + output; + }; + pwr-vccst-pwrgd-od { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "VCCST_PWRGD output to PCH"; + enum-name = "PWR_VCCST_PWRGD"; + gpios = <&gpioa 4 GPIO_OPEN_DRAIN>; + output; + }; + pwr-imvp9-vrrdy-od { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "VRRDY input from IMVP9"; + enum-name = "PWR_IMVP9_VRRDY"; + gpios = <&gpio4 3 0>; + }; + pwr-pch-pwrok { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "PCH_PWROK output to PCH"; + enum-name = "PWR_PCH_PWROK"; + gpios = <&gpio7 2 GPIO_OPEN_DRAIN>; + output; + }; + pwr-ec-pch-sys-pwrok { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "SYS_PWROK output to PCH"; + enum-name = "PWR_EC_PCH_SYS_PWROK"; + gpios = <&gpio3 7 0>; + output; + }; + pwr-sys-rst-l { + compatible = "intel,ap-pwrseq-gpio"; + dbg-label = "SYS_RESET# output to PCH"; + enum-name = "PWR_SYS_RST"; + gpios = <&gpioc 5 (GPIO_ACTIVE_LOW|GPIO_OPEN_DRAIN)>; + output; + }; + pwr-slp-s4 { + compatible = "intel,ap-pwrseq-vw"; + dbg-label = "SLP_S4 virtual wire input from PCH"; + enum-name = "PWR_SLP_S4"; + virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4"; + vw-invert; + }; + pwr-slp-s5 { + compatible = "intel,ap-pwrseq-vw"; + dbg-label = "SLP_S5 virtual wire input from PCH"; + enum-name = "PWR_SLP_S5"; + virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5"; + vw-invert; + }; + pwr-all-sys-pwrgd { + compatible = "intel,ap-pwrseq-external"; + dbg-label = "Combined all power good"; + enum-name = "PWR_ALL_SYS_PWRGD"; + }; + pwr-adc-pp3300 { + compatible = "intel,ap-pwrseq-adc"; + dbg-label = "PP3300 PWROK (from ADC)"; + enum-name = "PWR_DSW_PWROK"; + trigger-high = <&cmp_pp3300_s5_high>; + trigger-low = <&cmp_pp3300_s5_low>; + }; + pwr-adc-pp1p05 { + compatible = "intel,ap-pwrseq-adc"; + dbg-label = "PP1P05 PWROK (from ADC)"; + enum-name = "PWR_PG_PP1P05"; + trigger-high = <&cmp_pp1p05_high>; + trigger-low = <&cmp_pp1p05_low>; + }; + + adc-cmp { + cmp_pp3300_s5_high: pp3300_high { + compatible = "nuvoton,adc-cmp"; + io-channels = <&adc0 6>; + comparison = "ADC_CMP_NPCX_GREATER"; + /* + * This is 90% of nominal voltage considering voltage + * divider on ADC input. + */ + threshold-mv = <2448>; + }; + cmp_pp3300_s5_low: pp3300_low { + compatible = "nuvoton,adc-cmp"; + io-channels = <&adc0 6>; + comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; + threshold-mv = <2448>; + }; + cmp_pp1p05_high: pp1p05_high { + compatible = "nuvoton,adc-cmp"; + io-channels = <&adc0 4>; + comparison = "ADC_CMP_NPCX_GREATER"; + /* Setting at 90% of nominal voltage */ + threshold-mv = <945>; + }; + cmp_pp1p05_low: pp1p05_low { + compatible = "nuvoton,adc-cmp"; + io-channels = <&adc0 4>; + comparison = "ADC_CMP_NPCX_LESS_OR_EQUAL"; + threshold-mv = <945>; + }; + }; +}; + +/* + * Because the power signals directly reference the GPIOs, + * the correspinding named-gpios need to have no-auto-init set. + */ +&gpio_ec_soc_dsw_pwrok { + no-auto-init; +}; +&gpio_ec_soc_pch_pwrok_od { + no-auto-init; +}; +&gpio_ec_soc_rsmrst_l { + no-auto-init; +}; +&gpio_ec_soc_sys_pwrok { + no-auto-init; +}; +&gpio_ec_soc_vccst_pwrgd_od { + no-auto-init; +}; +&gpio_en_pp3300_s5 { + no-auto-init; +}; +&gpio_en_pp5000_s5 { + no-auto-init; +}; +&gpio_imvp91_vrrdy_od { + no-auto-init; +}; +&gpio_rsmrst_pwrgd_l { + no-auto-init; +}; +&gpio_slp_s0_l { + no-auto-init; +}; +&gpio_slp_s3_l { + no-auto-init; +}; +&gpio_slp_s4_l { + no-auto-init; +}; +&gpio_slp_sus_l { + no-auto-init; +}; +&gpio_sys_rst_odl { + no-auto-init; +}; |