diff options
Diffstat (limited to 'zephyr/program/nissa/yavilla/overlay.dtsi')
-rw-r--r-- | zephyr/program/nissa/yavilla/overlay.dtsi | 34 |
1 files changed, 27 insertions, 7 deletions
diff --git a/zephyr/program/nissa/yavilla/overlay.dtsi b/zephyr/program/nissa/yavilla/overlay.dtsi index b60ad2f476..c75ae9dd79 100644 --- a/zephyr/program/nissa/yavilla/overlay.dtsi +++ b/zephyr/program/nissa/yavilla/overlay.dtsi @@ -49,6 +49,16 @@ flags = <GPIO_INT_EDGE_BOTH>; handler = "power_button_interrupt"; }; + int_vol_down: vol_down { + irq-pin = <&gpio_voldn_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "button_interrupt"; + }; + int_vol_up: vol_up { + irq-pin = <&gpio_volup_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "button_interrupt"; + }; int_wp_l: wp_l { irq-pin = <&gpio_ec_wp_odl>; flags = <GPIO_INT_EDGE_BOTH>; @@ -59,6 +69,21 @@ flags = <GPIO_INT_EDGE_BOTH>; handler = "lid_interrupt"; }; + int_tablet_mode: tablet_mode { + irq-pin = <&gpio_tablet_mode_l>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "gmr_tablet_switch_isr"; + }; + int_acc: lid_imu { + irq-pin = <&gpio_acc_int_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "bma4xx_interrupt"; + }; + int_imu: ec_imu { + irq-pin = <&gpio_imu_int_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "bmi3xx_interrupt"; + }; int_usb_c0: usb_c0 { irq-pin = <&gpio_usb_c0_int_odl>; flags = <GPIO_INT_EDGE_FALLING>; @@ -73,14 +98,9 @@ unused-pins { compatible = "unused-gpios"; - unused-gpios = <&gpioa 7 0>, - <&gpioc 0 0>, - <&gpioc 6 0>, + unused-gpios = <&gpioc 6 0>, <&gpiod 7 0>, <&gpioh 2 0>, - <&gpioi 6 0>, - <&gpioi 7 0>, - <&gpioj 0 0>, <&gpioj 3 0>, <&gpiok 7 GPIO_OUTPUT>; }; @@ -292,7 +312,7 @@ &i2c2 { label = "I2C_SENSOR"; - clock-frequency = <I2C_BITRATE_FAST>; + clock-frequency = <I2C_BITRATE_STANDARD>; pinctrl-0 = <&i2c2_clk_gpf6_default &i2c2_data_gpf7_default>; pinctrl-names = "default"; |