diff options
Diffstat (limited to 'zephyr/program/nissa/it8xxx2_program.conf')
| -rw-r--r-- | zephyr/program/nissa/it8xxx2_program.conf | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/zephyr/program/nissa/it8xxx2_program.conf b/zephyr/program/nissa/it8xxx2_program.conf deleted file mode 100644 index 475f34cf9d..0000000000 --- a/zephyr/program/nissa/it8xxx2_program.conf +++ /dev/null @@ -1,65 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_FLASH_IT8XXX2=y -CONFIG_CROS_SYSTEM_IT8XXX2=y -CONFIG_ESPI_IT8XXX2=y -CONFIG_FPU=y -# rv32iafc/ilp32f is not supported by the toolchain, so use soft-float -CONFIG_FLOAT_HARD=n - -# EC performance is bad; limiting sensor data rate helps keep it from degrading -# so much that it causes problems. b/240485526, b/230818312 -CONFIG_PLATFORM_EC_MAX_SENSOR_FREQ_MILLIHZ=100000 - -# Allow more time for the charger to stabilise -CONFIG_PLATFORM_EC_POWER_BUTTON_INIT_TIMEOUT=5 - -# ITE has more space, so don't restrict shell -CONFIG_SHELL_MINIMAL=n - -# RAM savings, since this chip is tight on available RAM. -# It's useful to store a lot of logs for the host to request, but the default 4k -# is pretty large. -CONFIG_PLATFORM_EC_HOSTCMD_CONSOLE_BUF_SIZE=2048 -# Our threads have short names, save 20 bytes per thread -CONFIG_THREAD_MAX_NAME_LEN=12 -# Task stacks, tuned by experiment. Most expanded to prevent overflow, and a few -# shrunk to save RAM. -CONFIG_AP_PWRSEQ_STACK_SIZE=1408 -CONFIG_TASK_HOSTCMD_STACK_SIZE=1280 -CONFIG_TASK_MOTIONSENSE_STACK_SIZE=1280 -CONFIG_TASK_PD_INT_STACK_SIZE=1280 - -# TCPC+PPC: ITE on-chip for C0, PS8745 for optional C1 -CONFIG_PLATFORM_EC_USB_PD_TCPM_ITE_ON_CHIP=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_DRIVER_IT8XXX2=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8745=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_CHARGER=y -# SM5803 controls power path on both ports -CONFIG_PLATFORM_EC_USB_PD_5V_CHARGER_CTRL=y -# SM5803 can discharge VBUS, but not via one of the available options; -# pd_power_supply_reset() does discharge. -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE=n -# The EC is put into programming mode while firmware is running -# (after releasing reset) and PD after being reset will hard-reset -# the port if a contract was already set up. If the system has no -# battery, this will prevent programming because it will brown out -# the system and reset. Inserting a delay gives the programmer more -# time to put the EC into programming mode. -CONFIG_PLATFORM_EC_USB_PD_STARTUP_DELAY_MS=2000 - -# Charger driver and configuration -CONFIG_PLATFORM_EC_OCPC=y -CONFIG_PLATFORM_EC_CHARGER_SM5803=y -CONFIG_PLATFORM_EC_OCPC_DEF_RBATT_MOHMS=21 -CONFIG_PLATFORM_EC_PD_MAX_VOLTAGE_MV=15000 -# SM5803 is very inefficient in buck-boost operation, so DPS doesn't help and -# might actually contribute to charger failures. -CONFIG_PLATFORM_EC_USB_PD_DPS=n - -# VSENSE: PP3300_S5 & PP1050_PROC -CONFIG_VCMP_IT8XXX2=y -CONFIG_SENSOR=y -CONFIG_SENSOR_SHELL=n |