diff options
Diffstat (limited to 'board/wolf/board.c')
-rw-r--r-- | board/wolf/board.c | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/board/wolf/board.c b/board/wolf/board.c deleted file mode 100644 index cd6cc1462a..0000000000 --- a/board/wolf/board.c +++ /dev/null @@ -1,229 +0,0 @@ -/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -/* EC for Wolf board configuration */ - -#include "adc.h" -#include "backlight.h" -#include "chip_temp_sensor.h" -#include "chipset_haswell.h" -#include "chipset_x86_common.h" -#include "common.h" -#include "ec_commands.h" -#include "extpower.h" -#include "gpio.h" -#include "host_command.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "lm4_adc.h" -#include "peci.h" -#include "power_button.h" -#include "registers.h" -#include "switch.h" -#include "temp_sensor.h" -#include "temp_sensor_g781.h" -#include "timer.h" -#include "util.h" - -/* GPIO signal list. Must match order from enum gpio_signal. */ -const struct gpio_info gpio_list[] = { - /* Inputs with interrupt handlers are first for efficiency */ - {"POWER_BUTTON_L", LM4_GPIO_A, (1<<2), GPIO_INT_BOTH, - power_button_interrupt}, - {"LID_OPEN", LM4_GPIO_A, (1<<3), GPIO_INT_BOTH, - lid_interrupt}, - {"AC_PRESENT", LM4_GPIO_H, (1<<3), GPIO_INT_BOTH, - extpower_interrupt}, - {"PCH_BKLTEN", LM4_GPIO_M, (1<<3), GPIO_INT_BOTH, - backlight_interrupt}, - {"PCH_SLP_S0_L", LM4_GPIO_G, (1<<6), GPIO_INT_BOTH, - x86_interrupt}, - {"PCH_SLP_S3_L", LM4_GPIO_G, (1<<7), GPIO_INT_BOTH, - x86_interrupt}, - {"PCH_SLP_S5_L", LM4_GPIO_H, (1<<1), GPIO_INT_BOTH, - x86_interrupt}, - {"PCH_SLP_SUS_L", LM4_GPIO_G, (1<<3), GPIO_INT_BOTH, - x86_interrupt}, - {"PP1050_PGOOD", LM4_GPIO_H, (1<<4), GPIO_INT_BOTH, - x86_interrupt}, - {"PP1350_PGOOD", LM4_GPIO_H, (1<<6), GPIO_INT_BOTH, - x86_interrupt}, - {"PP5000_PGOOD", LM4_GPIO_N, (1<<0), GPIO_INT_BOTH, - x86_interrupt}, - {"VCORE_PGOOD", LM4_GPIO_C, (1<<6), GPIO_INT_BOTH, - x86_interrupt}, - {"PCH_EDP_VDD_EN", LM4_GPIO_J, (1<<1), GPIO_INT_BOTH, - haswell_interrupt}, - {"RECOVERY_L", LM4_GPIO_A, (1<<5), GPIO_PULL_UP|GPIO_INT_BOTH, - switch_interrupt}, - {"WP_L", LM4_GPIO_A, (1<<4), GPIO_INT_BOTH, - switch_interrupt}, - - /* Other inputs */ - {"FAN_ALERT_L", LM4_GPIO_B, (1<<0), GPIO_INPUT, NULL}, - {"PCH_SUSWARN_L", LM4_GPIO_G, (1<<2), GPIO_INT_BOTH, NULL}, - {"USB1_OC_L", LM4_GPIO_E, (1<<7), GPIO_INPUT, NULL}, - {"USB2_OC_L", LM4_GPIO_E, (1<<0), GPIO_INPUT, NULL}, - {"BOARD_VERSION1", LM4_GPIO_Q, (1<<5), GPIO_INPUT, NULL}, - {"BOARD_VERSION2", LM4_GPIO_Q, (1<<6), GPIO_INPUT, NULL}, - {"BOARD_VERSION3", LM4_GPIO_Q, (1<<7), GPIO_INPUT, NULL}, - {"CPU_PGOOD", LM4_GPIO_C, (1<<4), GPIO_INPUT, NULL}, - - /* Outputs; all unasserted by default except for reset signals */ - {"CPU_PROCHOT", LM4_GPIO_B, (1<<1), GPIO_OUT_LOW, NULL}, - {"PP1350_EN", LM4_GPIO_H, (1<<5), GPIO_OUT_LOW, NULL}, - {"PP3300_DSW_GATED_EN", LM4_GPIO_J, (1<<3), GPIO_OUT_LOW, NULL}, - {"PP3300_DX_EN", LM4_GPIO_J, (1<<2), GPIO_OUT_LOW, NULL}, - {"PP3300_LTE_EN", LM4_GPIO_D, (1<<2), GPIO_OUT_LOW, NULL}, - {"PP3300_WLAN_EN", LM4_GPIO_J, (1<<0), GPIO_OUT_LOW, NULL}, - {"SUSP_VR_EN", LM4_GPIO_C, (1<<7), GPIO_OUT_LOW, NULL}, - {"VCORE_EN", LM4_GPIO_C, (1<<5), GPIO_OUT_LOW, NULL}, - {"PP5000_EN", LM4_GPIO_H, (1<<7), GPIO_OUT_LOW, NULL}, - {"SYS_PWROK", LM4_GPIO_H, (1<<2), GPIO_OUT_LOW, NULL}, - {"WLAN_OFF_L", LM4_GPIO_J, (1<<4), GPIO_OUT_LOW, NULL}, - {"CHARGE_L", LM4_GPIO_E, (1<<6), GPIO_OUT_LOW, NULL}, - - {"ENABLE_BACKLIGHT", LM4_GPIO_M, (1<<7), GPIO_OUT_LOW, NULL}, - {"ENABLE_TOUCHPAD", LM4_GPIO_N, (1<<1), GPIO_OUT_LOW, NULL}, - {"ENTERING_RW", LM4_GPIO_D, (1<<3), GPIO_OUT_LOW, NULL}, - {"PCH_DPWROK", LM4_GPIO_G, (1<<0), GPIO_OUT_LOW, NULL}, - /* - * HDA_SDO is technically an output, but we need to leave it as an - * input until we drive it high. So can't use open-drain (HI_Z). - */ - {"PCH_HDA_SDO", LM4_GPIO_G, (1<<1), GPIO_INPUT, NULL}, - {"PCH_WAKE_L", LM4_GPIO_F, (1<<0), GPIO_OUT_HIGH, NULL}, - {"PCH_NMI_L", LM4_GPIO_F, (1<<2), GPIO_OUT_HIGH, NULL}, - {"PCH_PWRBTN_L", LM4_GPIO_H, (1<<0), GPIO_OUT_HIGH, NULL}, - {"PCH_PWROK", LM4_GPIO_F, (1<<5), GPIO_OUT_LOW, NULL}, - /* FIXME: Why does PL6 not honor open drain semantics? Setting it to 1 - * drives the pin low while setting it to 0 drives the pin high. To - * work around this PCH_RCIN_L is set to an input. It will only - * be set to an output when it needs to be driven to 0. */ - {"PCH_RCIN_L", LM4_GPIO_L, (1<<6), GPIO_INPUT, NULL}, - {"PCH_RSMRST_L", LM4_GPIO_F, (1<<1), GPIO_OUT_LOW, NULL}, - {"PCH_SMI_L", LM4_GPIO_F, (1<<4), GPIO_ODR_HIGH, NULL}, - {"TOUCHSCREEN_RESET_L", LM4_GPIO_N, (1<<7), GPIO_OUT_LOW, NULL}, - {"EC_EDP_VDD_EN", LM4_GPIO_J, (1<<5), GPIO_OUT_LOW, NULL}, - - {"LPC_CLKRUN_L", LM4_GPIO_M, (1<<2), GPIO_ODR_HIGH, NULL}, - {"USB1_ENABLE", LM4_GPIO_E, (1<<4), GPIO_OUT_LOW, NULL}, - {"USB2_ENABLE", LM4_GPIO_D, (1<<5), GPIO_OUT_LOW, NULL}, - - {"PCH_SUSACK_L", LM4_GPIO_F, (1<<3), GPIO_OUT_HIGH, NULL}, - {"PCH_RTCRST_L", LM4_GPIO_F, (1<<6), GPIO_ODR_HIGH, NULL}, - {"PCH_SRTCRST_L", LM4_GPIO_F, (1<<7), GPIO_ODR_HIGH, NULL}, - - {"BAT_LED0_L", LM4_GPIO_N, (1<<6), GPIO_ODR_HIGH, NULL}, - {"BAT_LED1_L", LM4_GPIO_N, (1<<4), GPIO_ODR_HIGH, NULL}, -}; -BUILD_ASSERT(ARRAY_SIZE(gpio_list) == GPIO_COUNT); - -/* Pins with alternate functions */ -const struct gpio_alt_func gpio_alt_funcs[] = { - {GPIO_A, 0x03, 1, MODULE_UART}, /* UART0 */ - {GPIO_B, 0x04, 3, MODULE_I2C}, /* I2C0 SCL */ - {GPIO_B, 0x08, 3, MODULE_I2C, GPIO_OPEN_DRAIN}, /* I2C0 SDA */ - {GPIO_B, 0x40, 3, MODULE_I2C}, /* I2C5 SCL */ - {GPIO_B, 0x80, 3, MODULE_I2C, GPIO_OPEN_DRAIN}, /* I2C5 SDA */ - {GPIO_G, 0x30, 1, MODULE_UART}, /* UART2 */ - {GPIO_J, 0x40, 1, MODULE_PECI}, /* PECI Tx */ - {GPIO_J, 0x80, 0, MODULE_PECI, GPIO_ANALOG}, /* PECI Rx */ - {GPIO_L, 0x3f, 15, MODULE_LPC}, /* LPC */ - {GPIO_M, 0x33, 15, MODULE_LPC}, /* LPC */ - {GPIO_N, 0x0c, 1, MODULE_PWM_FAN}, /* Fan0 PWM/tach */ -}; -const int gpio_alt_funcs_count = ARRAY_SIZE(gpio_alt_funcs); - -/* x86 signal list. Must match order of enum x86_signal. */ -const struct x86_signal_info x86_signal_list[] = { - {GPIO_PP5000_PGOOD, 1, "PGOOD_PP5000"}, - {GPIO_PP1350_PGOOD, 1, "PGOOD_PP1350"}, - {GPIO_PP1050_PGOOD, 1, "PGOOD_PP1050"}, - {GPIO_VCORE_PGOOD, 1, "PGOOD_VCORE"}, - {GPIO_PCH_SLP_S0_L, 1, "SLP_S0#_DEASSERTED"}, - {GPIO_PCH_SLP_S3_L, 1, "SLP_S3#_DEASSERTED"}, - {GPIO_PCH_SLP_S5_L, 1, "SLP_S5#_DEASSERTED"}, - {GPIO_PCH_SLP_SUS_L, 1, "SLP_SUS#_DEASSERTED"}, -}; -BUILD_ASSERT(ARRAY_SIZE(x86_signal_list) == X86_SIGNAL_COUNT); - -/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ -const struct adc_t adc_channels[] = { - /* EC internal temperature is calculated by - * 273 + (295 - 450 * ADC_VALUE / ADC_READ_MAX) / 2 - * = -225 * ADC_VALUE / ADC_READ_MAX + 420.5 - */ - {"ECTemp", LM4_ADC_SEQ0, -225, ADC_READ_MAX, 420, - LM4_AIN_NONE, 0x0e /* TS0 | IE0 | END0 */, 0, 0}, - - /* IOUT == ICMNT is on PE3/AIN0 */ - /* We have 0.01-ohm resistors, and IOUT is 20X the differential - * voltage, so 1000mA ==> 200mV. - * ADC returns 0x000-0xFFF, which maps to 0.0-3.3V (as configured). - * mA = 1000 * ADC_VALUE / ADC_READ_MAX * 3300 / 200 - */ - {"ChargerCurrent", LM4_ADC_SEQ1, 33000, ADC_READ_MAX * 2, 0, - LM4_AIN(0), 0x06 /* IE0 | END0 */, LM4_GPIO_E, (1<<3)}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - /* Note: battery and charger share a port. Only include it once in - * this list so we don't double-initialize it. */ - {"batt_chg", I2C_PORT_BATTERY, 100}, - {"thermal", I2C_PORT_THERMAL, 100}, -}; -BUILD_ASSERT(ARRAY_SIZE(i2c_ports) == I2C_PORTS_USED); - - -/* Temperature sensors data; must be in same order as enum temp_sensor_id. */ -const struct temp_sensor_t temp_sensors[] = { - {"PECI", TEMP_SENSOR_TYPE_CPU, peci_temp_sensor_get_val, 0, 2}, - {"ECInternal", TEMP_SENSOR_TYPE_BOARD, chip_temp_sensor_get_val, 0, 4}, - {"G781Internal", TEMP_SENSOR_TYPE_BOARD, g781_get_val, 0, 4}, - {"G781External", TEMP_SENSOR_TYPE_BOARD, g781_get_val, 1, 4}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -struct keyboard_scan_config keyscan_config = { - .output_settle_us = 40, - .debounce_down_us = 6 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 1500, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = SECOND, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8 /* full set */ - }, -}; - -/** - * Perform necessary actions on host wake events. - */ -void board_process_wake_events(uint32_t active_wake_events) -{ - uint32_t power_button_mask; - - power_button_mask = EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON); - - /* If there are other events aside from the power button press drive - * the wake pin. Otherwise ensure it is high. */ - if (active_wake_events & ~power_button_mask) - gpio_set_level(GPIO_PCH_WAKE_L, 0); - else - gpio_set_level(GPIO_PCH_WAKE_L, 1); -} - -/** - * Board-specific g781 power state. - */ -int board_g781_has_power(void) -{ - return gpio_get_level(GPIO_PP3300_DX_EN); -} - |