diff options
Diffstat (limited to 'board/kodama')
-rw-r--r-- | board/kodama/analyzestack.yaml | 3 | ||||
-rw-r--r-- | board/kodama/battery.c | 125 | ||||
-rw-r--r-- | board/kodama/board.c | 397 | ||||
-rw-r--r-- | board/kodama/board.h | 128 | ||||
-rw-r--r-- | board/kodama/build.mk | 15 | ||||
-rw-r--r-- | board/kodama/ec.tasklist | 20 | ||||
-rw-r--r-- | board/kodama/gpio.inc | 106 | ||||
-rw-r--r-- | board/kodama/led.c | 155 | ||||
-rw-r--r-- | board/kodama/vif_override.xml | 3 |
9 files changed, 0 insertions, 952 deletions
diff --git a/board/kodama/analyzestack.yaml b/board/kodama/analyzestack.yaml deleted file mode 100644 index 4a057ce818..0000000000 --- a/board/kodama/analyzestack.yaml +++ /dev/null @@ -1,3 +0,0 @@ -remove: -# Remove all callsites pointing to panic_assert_fail. -- panic_assert_fail diff --git a/board/kodama/battery.c b/board/kodama/battery.c deleted file mode 100644 index 1dbff92a00..0000000000 --- a/board/kodama/battery.c +++ /dev/null @@ -1,125 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "battery.h" -#include "battery_fuel_gauge.h" -#include "charge_state.h" -#include "charger_mt6370.h" -#include "console.h" -#include "driver/charger/rt946x.h" -#include "gpio.h" -#include "power.h" -#include "usb_pd.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) - -const struct board_batt_params board_battery_info[] = { - [BATTERY_SIMPLO] = { - .fuel_gauge = { - .manuf_name = "SMP", - .device_name = "L19M3PG0", - .ship_mode = { - .reg_addr = 0x34, - .reg_data = { 0x0000, 0x1000 }, - }, - .fet = { - .reg_addr = 0x34, - .reg_mask = 0x0100, - .disconnect_val = 0x0100, - } - }, - .batt_info = { - .voltage_max = 4400, - .voltage_normal = 3840, - .voltage_min = 3000, - .precharge_current = 256, - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 60, - }, - }, - [BATTERY_CELXPERT] = { - .fuel_gauge = { - .manuf_name = "Celxpert", - .device_name = "L19C3PG0", - .ship_mode = { - .reg_addr = 0x34, - .reg_data = { 0x0000, 0x1000 }, - }, - .fet = { - .reg_addr = 0x34, - .reg_mask = 0x0100, - .disconnect_val = 0x0100, - } - }, - .batt_info = { - .voltage_max = 4400, - .voltage_normal = 3840, - .voltage_min = 2800, - .precharge_current = 404, - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 60, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SIMPLO; - -enum battery_present battery_hw_present(void) -{ - return gpio_get_level(GPIO_EC_BATT_PRES_ODL) ? BP_NO : BP_YES; -} - -int charger_profile_override(struct charge_state_data *curr) -{ - const struct battery_info *batt_info = battery_get_info(); - /* battery temp in 0.1 deg C */ - int bat_temp_c = curr->batt.temperature - 2731; - -#ifdef VARIANT_KUKUI_CHARGER_MT6370 - mt6370_charger_profile_override(curr); -#endif /* CONFIG_CHARGER_MT6370 */ - - /* - * When smart battery temperature is more than 45 deg C, the max - * charging voltage is 4100mV. - */ - if (curr->state == ST_CHARGE && bat_temp_c >= 450 - && !(curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE)) - curr->requested_voltage = 4100; - else - curr->requested_voltage = batt_info->voltage_max; - - /* - * mt6370's minimum regulated current is 500mA REG17[7:2] 0b100, - * values below 0b100 are preserved. In the other hand, it makes sure - * mt6370's VOREG set as 4400mV and minimum value of mt6370's ICHG - * is limited as 500mA. - */ - curr->requested_current = MAX(500, curr->requested_current); - - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} diff --git a/board/kodama/board.c b/board/kodama/board.c deleted file mode 100644 index 33ecbba384..0000000000 --- a/board/kodama/board.c +++ /dev/null @@ -1,397 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_ramp.h" -#include "charge_state.h" -#include "charger.h" -#include "charger_mt6370.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accelgyro_lsm6dsm.h" -#include "driver/charger/rt946x.h" -#include "driver/sync.h" -#include "driver/tcpm/mt6370.h" -#include "driver/usb_mux/it5205.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "i2c.h" -#include "i2c_bitbang.h" -#include "lid_switch.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "registers.h" -#include "spi.h" -#include "system.h" -#include "task.h" -#include "tcpm/tcpm.h" -#include "timer.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_pd_tcpm.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -static void tcpc_alert_event(enum gpio_signal signal) -{ - schedule_deferred_pd_interrupt(0 /* port */); -} - -#include "gpio_list.h" - -/******************************************************************************/ -/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ -const struct adc_t adc_channels[] = { - [ADC_BOARD_ID] = {"BOARD_ID", 3300, 4096, 0, STM32_AIN(10)}, - [ADC_EC_SKU_ID] = {"EC_SKU_ID", 3300, 4096, 0, STM32_AIN(8)}, - [ADC_POGO_ADC_INT_L] = {"POGO_ADC_INT_L", 3300, 4096, 0, STM32_AIN(6)}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/******************************************************************************/ -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"typec", 0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"other", 1, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA, - .flags = I2C_PORT_FLAG_DYNAMIC_SPEED}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -const struct i2c_port_t i2c_bitbang_ports[] = { - {"battery", 2, 100, GPIO_I2C3_SCL, GPIO_I2C3_SDA, .drv = &bitbang_drv}, -}; -const unsigned int i2c_bitbang_ports_used = ARRAY_SIZE(i2c_bitbang_ports); - -/* power signal list. Must match order of enum power_signal. */ -const struct power_signal_info power_signal_list[] = { - {GPIO_AP_IN_SLEEP_L, POWER_SIGNAL_ACTIVE_LOW, "AP_IN_S3_L"}, - {GPIO_PMIC_EC_RESETB, POWER_SIGNAL_ACTIVE_HIGH, "PMIC_PWR_GOOD"}, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -/******************************************************************************/ -/* SPI devices */ -const struct spi_device_t spi_devices[] = { -}; -const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); - -/******************************************************************************/ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = MT6370_TCPC_I2C_ADDR_FLAGS, - }, - .drv = &mt6370_tcpm_drv, - }, -}; - -struct mt6370_thermal_bound thermal_bound = { - .target = 75, - .err = 4, -}; - -static void board_hpd_status(const struct usb_mux *me, - mux_state_t mux_state) -{ - /* - * svdm_dp_attention() did most of the work, we only need to notify - * host here. - */ - host_set_single_event(EC_HOST_EVENT_USB_MUX); -} - - -__override const struct rt946x_init_setting *board_rt946x_init_setting(void) -{ - static const struct rt946x_init_setting battery_init_setting = { - .eoc_current = 150, - .mivr = 4000, - .ircmp_vclamp = 32, - .ircmp_res = 25, - .boost_voltage = 5050, - .boost_current = 1500, - }; - - return &battery_init_setting; -} - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_MUX, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, - .hpd_update = &board_hpd_status, - }, -}; - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) - status |= PD_STATUS_TCPC_ALERT_0; - - return status; -} - -static int force_discharge; - -int board_set_active_charge_port(int charge_port) -{ - CPRINTS("New chg p%d", charge_port); - - /* ignore all request when discharge mode is on */ - if (force_discharge && charge_port != CHARGE_PORT_NONE) - return EC_SUCCESS; - - switch (charge_port) { - case CHARGE_PORT_USB_C: - /* Don't charge from a source port */ - if (board_vbus_source_enabled(charge_port)) - return -1; - break; - case CHARGE_PORT_NONE: - /* - * To ensure the fuel gauge (max17055) is always powered - * even when battery is disconnected, keep VBAT rail on but - * set the charging current to minimum. - */ - charger_set_current(CHARGER_SOLO, 0); - break; - default: - panic("Invalid charge port\n"); - break; - } - - return EC_SUCCESS; -} - -int board_discharge_on_ac(int enable) -{ - int ret, port; - - if (enable) { - port = CHARGE_PORT_NONE; - } else { - /* restore the charge port state */ - port = charge_manager_get_override(); - if (port == OVERRIDE_OFF) - port = charge_manager_get_active_charge_port(); - } - - ret = charger_discharge_on_ac(enable); - if (ret) - return ret; - - if (force_discharge && !enable) - rt946x_toggle_bc12_detection(); - - force_discharge = enable; - return board_set_active_charge_port(port); -} - -int extpower_is_present(void) -{ - /* - * The charger will indicate VBUS presence if we're sourcing 5V, - * so exclude such ports. - */ - int usb_c_extpower_present; - - if (board_vbus_source_enabled(CHARGE_PORT_USB_C)) - usb_c_extpower_present = 0; - else - usb_c_extpower_present = tcpm_check_vbus_level( - CHARGE_PORT_USB_C, - VBUS_PRESENT); - - return usb_c_extpower_present; -} - -int pd_snk_is_vbus_provided(int port) -{ - if (port) - panic("Invalid charge port\n"); - - return rt946x_is_vbus_ready(); -} - -#define CHARGER_I2C_ADDR_FLAGS RT946X_ADDR_FLAGS - -static void board_init(void) -{ -#ifdef SECTION_IS_RW - int val; - - i2c_read8(I2C_PORT_CHARGER, CHARGER_I2C_ADDR_FLAGS, - RT946X_REG_CHGCTRL1, &val); - val &= RT946X_MASK_OPA_MODE; - i2c_write8(I2C_PORT_CHARGER, CHARGER_I2C_ADDR_FLAGS, - RT946X_REG_CHGCTRL1, (val | RT946X_MASK_STAT_EN)); -#endif - - /* If the reset cause is external, pulse PMIC force reset. */ - if (system_get_reset_flags() == EC_RESET_FLAG_RESET_PIN) { - gpio_set_level(GPIO_PMIC_FORCE_RESET_ODL, 0); - msleep(100); - gpio_set_level(GPIO_PMIC_FORCE_RESET_ODL, 1); - } - - /* Enable TCPC alert interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - - /* Enable charger interrupts */ - gpio_enable_interrupt(GPIO_CHARGER_INT_ODL); - -#ifdef SECTION_IS_RW - /* Enable interrupts from BMI160 sensor. */ - gpio_enable_interrupt(GPIO_ACCEL_INT_ODL); - - /* Enable interrupt for the camera vsync. */ - gpio_enable_interrupt(GPIO_SYNC_INT); -#endif /* SECTION_IS_RW */ - - /* Enable interrupt from PMIC. */ - gpio_enable_interrupt(GPIO_PMIC_EC_RESETB); - - /* reduce mt6370 db and bl driving capacity */ - mt6370_reduce_db_bl_driving(); - - /* Display bias settings. */ - mt6370_db_set_voltages(6000, 5800, 5800); - - /* - * Fix backlight led maximum current: - * tolerance 120mA * 0.75 = 90mA. - * (b/133655155) - */ - mt6370_backlight_set_dim(MT6370_BLDIM_DEFAULT * 3 / 4); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -/* - * Re-configure i2c-2 to 100kHz for EVT devices, this must execute after - * i2c_init (in main()) and before battery fuel gauge access the battery - * (i.e. HOOK_PRIO_I2C + 1). - * - * Note that stm32f0 don't run adc_init in hooks, so we can safely call - * board_get_version() before HOOK_PRIO_INIT_ADC(=HOOK_PRIO_DEFAULT). - */ -static void board_i2c_init(void) -{ - if (board_get_version() < 2) - i2c_set_freq(1, I2C_FREQ_100KHZ); -} -DECLARE_HOOK(HOOK_INIT, board_i2c_init, HOOK_PRIO_INIT_I2C); - -/* Motion sensors */ -/* Mutexes */ -#ifdef SECTION_IS_RW -static struct mutex g_lid_mutex; - -static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA; - -/* Matrix to rotate accelerometer into standard reference frame */ -static const mat33_fp_t lid_standard_ref = { - {0, FLOAT_TO_FP(1), 0}, - {FLOAT_TO_FP(-1), 0, 0}, - {0, 0, FLOAT_TO_FP(1)} -}; - -struct motion_sensor_t motion_sensors[] = { - [LID_ACCEL] = { - .name = "Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LSM6DSM, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_LID, - .drv = &lsm6dsm_drv, - .mutex = &g_lid_mutex, - .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, MOTIONSENSE_TYPE_ACCEL), - .int_signal = GPIO_ACCEL_INT_ODL, - .flags = MOTIONSENSE_FLAG_INT_SIGNAL, - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS, - .rot_standard_ref = &lid_standard_ref, - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs */ - .min_frequency = LSM6DSM_ODR_MIN_VAL, - .max_frequency = LSM6DSM_ODR_MAX_VAL, - .config = { - /* Enable accel in S0 */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 13000 | ROUND_UP_FLAG, - .ec_rate = 100 * MSEC, - }, - }, - }, - [LID_GYRO] = { - .name = "Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_LSM6DSM, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_LID, - .drv = &lsm6dsm_drv, - .mutex = &g_lid_mutex, - .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, MOTIONSENSE_TYPE_GYRO), - .port = I2C_PORT_ACCEL, - .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS, - .default_range = 1000 | ROUND_UP_FLAG, /* dps */ - .rot_standard_ref = &lid_standard_ref, - .min_frequency = LSM6DSM_ODR_MIN_VAL, - .max_frequency = LSM6DSM_ODR_MAX_VAL, - }, - [VSYNC] = { - .name = "Camera vsync", - .active_mask = SENSOR_ACTIVE_S0, - .chip = MOTIONSENSE_CHIP_GPIO, - .type = MOTIONSENSE_TYPE_SYNC, - .location = MOTIONSENSE_LOC_CAMERA, - .drv = &sync_drv, - .default_range = 0, - .min_frequency = 0, - .max_frequency = 1, - }, -}; -const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); -#endif /* SECTION_IS_RW */ - -/* - * Return if VBUS is sagging too low - */ -int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state) -{ - int voltage; - /* - * Though we have a more tolerant range (3.9V~13.4V), setting 4400 to - * prevent from a bad charger crashed. - * - * TODO(b:131284131): mt6370 VBUS reading is not accurate currently. - * Vendor will provide a workaround solution to fix the gap between ADC - * reading and actual voltage. After the workaround applied, we could - * try to raise this value to 4600. (when it says it read 4400, it is - * actually close to 4600) - */ - if (charger_get_vbus_voltage(port, &voltage)) - voltage = 0; - - return voltage < 4400; -} - -int board_get_battery_i2c(void) -{ - return board_get_version() >= 2 ? 2 : 1; -} diff --git a/board/kodama/board.h b/board/kodama/board.h deleted file mode 100644 index 48e39b2300..0000000000 --- a/board/kodama/board.h +++ /dev/null @@ -1,128 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Configuration for Kukui */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_KUKUI_BATTERY_SMART -#define VARIANT_KUKUI_CHARGER_MT6370 -#define VARIANT_KUKUI_EC_STM32F098 -#define VARIANT_KUKUI_POGO_KEYBOARD -#define VARIANT_KUKUI_TABLET_PWRBTN -#undef CONFIG_CMD_MFALLOW - - -#ifndef SECTION_IS_RW -#define VARIANT_KUKUI_NO_SENSORS -#endif /* SECTION_IS_RW */ - -#include "baseboard.h" - -#define CONFIG_DEBUG_ASSERT_BRIEF - -#define CONFIG_VOLUME_BUTTONS - -#define CONFIG_USB_MUX_IT5205 - -#define CONFIG_LED_ONOFF_STATES - -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM - -#define CONFIG_I2C_BITBANG -#define I2C_BITBANG_PORT_COUNT 1 -#undef CONFIG_I2C_NACK_RETRY_COUNT -#define CONFIG_I2C_NACK_RETRY_COUNT 3 -#define CONFIG_SMBUS_PEC - -/* Battery */ -#define BATTERY_DESIRED_CHARGING_CURRENT 2000 /* mA */ - -#define CONFIG_CHARGER_MT6370_BACKLIGHT -#define CONFIG_CHARGER_MAINTAIN_VBAT - -/* Motion Sensors */ -#ifdef SECTION_IS_RW -#define CONFIG_ACCELGYRO_LSM6DSM -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(LID_ACCEL) - -/* Camera VSYNC */ -#define CONFIG_SYNC -#define CONFIG_SYNC_COMMAND -#define CONFIG_SYNC_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC) -#endif /* SECTION_IS_RW */ - -/* I2C ports */ -#define I2C_PORT_CHARGER 0 -#define I2C_PORT_TCPC0 0 -#define I2C_PORT_USB_MUX 0 -#define I2C_PORT_ACCEL 1 -#define I2C_PORT_BATTERY board_get_battery_i2c() -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY - -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_INPUT_DEVICES - -#define PD_OPERATING_POWER_MW 15000 - -#ifndef __ASSEMBLER__ - -enum adc_channel { - /* Real ADC channels begin here */ - ADC_BOARD_ID = 0, - ADC_EC_SKU_ID, - ADC_POGO_ADC_INT_L, - ADC_CH_COUNT -}; - -/* power signal definitions */ -enum power_signal { - AP_IN_S3_L, - PMIC_PWR_GOOD, - - /* Number of signals */ - POWER_SIGNAL_COUNT, -}; - -/* Motion sensors */ -enum sensor_id { - LID_ACCEL = 0, - LID_GYRO, - VSYNC, - SENSOR_COUNT, -}; - -enum charge_port { - CHARGE_PORT_USB_C, -}; - -enum battery_type { - BATTERY_SIMPLO, - BATTERY_CELXPERT, - BATTERY_TYPE_COUNT, -}; - -#include "gpio_signal.h" -#include "registers.h" - -#ifdef SECTION_IS_RO -/* Interrupt handler for emmc task */ -void emmc_cmd_interrupt(enum gpio_signal signal); -#endif - -void board_reset_pd_mcu(void); -int board_get_version(void); -void pogo_adc_interrupt(enum gpio_signal signal); -int board_discharge_on_ac(int enable); -/* returns the i2c port number of battery */ -int board_get_battery_i2c(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/kodama/build.mk b/board/kodama/build.mk deleted file mode 100644 index 0b3565fd84..0000000000 --- a/board/kodama/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build -# -# -# STmicro STM32F098VC -CHIP:=stm32 -CHIP_FAMILY:=stm32f0 -CHIP_VARIANT:=stm32f09x -BASEBOARD:=kukui - -board-y=battery.o board.o led.o diff --git a/board/kodama/ec.tasklist b/board/kodama/ec.tasklist deleted file mode 100644 index f71a208dd6..0000000000 --- a/board/kodama/ec.tasklist +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/** - * See CONFIG_TASK_LIST in config.h for details. - */ -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG, usb_charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS_RW(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, 1024) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, 1280) \ - TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, 1024) \ - TASK_ALWAYS_RO(EMMC, emmc_task, NULL, LARGER_TASK_STACK_SIZE) - diff --git a/board/kodama/gpio.inc b/board/kodama/gpio.inc deleted file mode 100644 index 75a3db7d20..0000000000 --- a/board/kodama/gpio.inc +++ /dev/null @@ -1,106 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. - */ - -/* Interrupts */ -GPIO_INT(USB_C0_PD_INT_ODL, PIN(B, 1), GPIO_INT_FALLING | GPIO_PULL_UP, - tcpc_alert_event) -GPIO_INT(VOLUME_UP_L, PIN(B, 10), GPIO_INT_BOTH | GPIO_PULL_UP, - button_interrupt) /* EC_VOLUP_BTN_ODL */ -GPIO_INT(VOLUME_DOWN_L, PIN(B, 11), GPIO_INT_BOTH | GPIO_PULL_UP, - button_interrupt) /* EC_VOLDN_BTN_ODL */ -GPIO_INT(POWER_BUTTON_L, PIN(A, 0), GPIO_INT_BOTH | GPIO_PULL_UP, - power_button_interrupt) /* EC_PWR_BTN_ODL */ - -GPIO_INT(AP_IN_SLEEP_L, PIN(C, 12), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(PMIC_EC_RESETB, PIN(B, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, - power_signal_interrupt) -GPIO_INT(WARM_RESET_REQ, PIN(A, 3), GPIO_INT_RISING | GPIO_PULL_DOWN, - chipset_reset_request_interrupt) -GPIO_INT(AP_EC_WATCHDOG_L, PIN(C, 2), GPIO_INT_FALLING, - chipset_watchdog_interrupt) - -GPIO_INT_RW(ACCEL_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_SEL_1P8V | GPIO_PULL_UP, - lsm6dsm_interrupt) -GPIO_INT(CHARGER_INT_ODL, PIN(C, 13), GPIO_INT_FALLING | GPIO_PULL_UP, - rt946x_interrupt) -GPIO_INT_RO(EMMC_CMD, PIN(B, 15), GPIO_INT_FALLING, - emmc_cmd_interrupt) -GPIO_INT(SPI1_NSS, PIN(A, 15), GPIO_INT_BOTH | GPIO_PULL_UP, - spi_event) -GPIO_INT_RW(SYNC_INT, PIN(A, 8), GPIO_INT_RISING | GPIO_PULL_DOWN, - sync_interrupt) -GPIO_INT(HALL_INT_L, PIN(C, 5), GPIO_INT_BOTH, - lid_interrupt) -GPIO_INT(POGO_ADC_INT_L, PIN(A, 6), GPIO_INT_BOTH, - pogo_adc_interrupt) - -/* unused */ -GPIO(POGO_VBUS_PRESENT, PIN(A, 14), GPIO_INPUT) - - -/* Reset pins */ -GPIO(AP_SYS_RST_L, PIN(C, 11), GPIO_OUT_LOW) -GPIO(PMIC_WATCHDOG_L, PIN(C, 3), GPIO_OUT_LOW) -GPIO(PMIC_EN_ODL, PIN(C, 10), GPIO_ODR_HIGH) -GPIO(PMIC_FORCE_RESET_ODL, PIN(A, 2), GPIO_ODR_HIGH) -GPIO(MT6370_RST_L, PIN(F, 0), GPIO_OUT_LOW) - -/* - * I2C pins should be configured as inputs until I2C module is - * initialized. This will avoid driving the lines unintentionally. - */ -GPIO(I2C1_SCL, PIN(B, 8), GPIO_INPUT) -GPIO(I2C1_SDA, PIN(B, 9), GPIO_INPUT) -GPIO(I2C2_SCL, PIN(A, 11), GPIO_INPUT) -GPIO(I2C2_SDA, PIN(A, 12), GPIO_INPUT) -GPIO(I2C3_SCL, PIN(B, 6), GPIO_ODR_HIGH) -GPIO(I2C3_SDA, PIN(D, 2), GPIO_ODR_HIGH) - -/* Analog pins */ -GPIO(BOARD_ID, PIN(C, 0), GPIO_ANALOG) -GPIO(EC_SKU_ID, PIN(B, 0), GPIO_ANALOG) - -/* Other input pins */ -GPIO(WP_L, PIN(C, 8), GPIO_INPUT) /* EC_FLASH_WP_ODL */ -GPIO(BOOT0, PIN(F, 11), GPIO_INPUT) -GPIO(CCD_MODE_ODL, PIN(A, 1), GPIO_INPUT) -GPIO(EC_BATT_PRES_ODL, PIN(A, 7), GPIO_INPUT) - -/* Other output pins */ -GPIO(ENTERING_RW, PIN(C, 6), GPIO_ODR_HIGH) /* EC_ENTERING_RW_ODL */ -GPIO(EC_INT_L, PIN(B, 12), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */ -GPIO(EC_BOARD_ID_EN_L, PIN(C, 15), GPIO_ODR_HIGH) /* EC_BOARD_ID_EN_ODL */ -GPIO(USB_C0_DP_POLARITY, PIN(C, 14), GPIO_OUT_LOW) -GPIO(USB_C0_HPD_OD, PIN(F, 1), GPIO_ODR_LOW) -GPIO(BOOTBLOCK_EN_L, PIN(C, 1), GPIO_ODR_HIGH) -GPIO(BATT_CUTOFF_INDICATOR, PIN(A, 5), GPIO_OUT_LOW) -GPIO(EN_PP3300_POGO, PIN(A, 13), GPIO_OUT_LOW) -GPIO(BC12_DET_EN, PIN(C, 4), GPIO_OUT_LOW) - -UNIMPLEMENTED(EN_PP5000_USBC) -UNIMPLEMENTED(EN_USBC_CHARGE_L) - -/* USART1: PA9/PA10 */ -ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, 0) -/* I2C MASTER: PB8/9 */ -ALTERNATE(PIN_MASK(B, 0x0300), 1, MODULE_I2C, GPIO_ODR_HIGH ) -/* I2C MASTER: PA11/12 */ -ALTERNATE(PIN_MASK(A, 0x1800), 5, MODULE_I2C, GPIO_ODR_HIGH ) -/* SPI SLAVE: PB3/4/5 */ -ALTERNATE(PIN_MASK(B, 0x0038), 0, MODULE_SPI, 0) -#ifdef SECTION_IS_RO -/* SPI SLAVE: PB13/14/15 */ -ALTERNATE(PIN_MASK(B, 0xE000), 0, MODULE_SPI_FLASH, 0) -#endif -/* SPI SLAVE CS: PA15 */ -ALTERNATE(PIN_MASK(A, 0x8000), 0, MODULE_SPI, 0) diff --git a/board/kodama/led.c b/board/kodama/led.c deleted file mode 100644 index d96b340d73..0000000000 --- a/board/kodama/led.c +++ /dev/null @@ -1,155 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery LED control for Kukui board. - */ -#include "charge_state.h" -#include "driver/charger/rt946x.h" -#include "hooks.h" -#include "led_common.h" -#include "led_onoff_states.h" -#include "ec_commands.h" - -#define LED_RED MT6370_LED_ID1 -#define LED_GREEN MT6370_LED_ID2 -#define LED_WHITE MT6370_LED_ID3 - -#define LED_MASK_OFF 0 -#define LED_MASK_RED MT6370_MASK_RGB_ISNK1DIM_EN -#define LED_MASK_GREEN MT6370_MASK_RGB_ISNK2DIM_EN -#define LED_MASK_WHITE MT6370_MASK_RGB_ISNK3DIM_EN - -__override const int led_charge_lvl_1 = 5; -__override const int led_charge_lvl_2 = 97; - -__override struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_RED, LED_INDEFINITE} }, - [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_FACTORY_TEST] = {{EC_LED_COLOR_RED, 2 * LED_ONE_SEC}, - {EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} }, -}; - -__override const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = { - [PWR_LED_STATE_ON] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [PWR_LED_STATE_SUSPEND_AC] = {{EC_LED_COLOR_WHITE, 3 * LED_ONE_SEC}, - {LED_OFF, LED_ONE_SEC / 2} }, - [PWR_LED_STATE_SUSPEND_NO_AC] = {{LED_OFF, LED_INDEFINITE} }, - [PWR_LED_STATE_OFF] = {{LED_OFF, LED_INDEFINITE} }, -}; - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_POWER_LED, - EC_LED_ID_BATTERY_LED -}; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -static int led_mask = LED_MASK_OFF; - -static void led_set_color(int mask) -{ - static int new_mask = LED_MASK_OFF; - - if (new_mask == mask) - return; - else - new_mask = mask; - - mt6370_led_set_color(led_mask); -} - -__override void led_set_color_power(enum ec_led_colors color) -{ - if (color == EC_LED_COLOR_WHITE) - led_mask |= LED_MASK_WHITE; - else - led_mask &= ~LED_MASK_WHITE; - led_set_color(led_mask); -} - -__override void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_RED: - led_mask |= LED_MASK_RED; - led_mask &= ~LED_MASK_GREEN; - break; - case EC_LED_COLOR_AMBER: - led_mask |= LED_MASK_RED; - led_mask |= LED_MASK_GREEN; - break; - case EC_LED_COLOR_GREEN: - led_mask &= ~LED_MASK_RED; - led_mask |= LED_MASK_GREEN; - break; - default: /* LED_OFF and other unsupported colors */ - led_mask &= ~LED_MASK_RED; - led_mask &= ~LED_MASK_GREEN; - break; - } - led_set_color(led_mask); -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - brightness_range[EC_LED_COLOR_RED] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; - brightness_range[EC_LED_COLOR_GREEN] = 1; - } else if (led_id == EC_LED_ID_POWER_LED) { - brightness_range[EC_LED_COLOR_WHITE] = 1; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - if (brightness[EC_LED_COLOR_RED] != 0) - led_set_color_battery(EC_LED_COLOR_RED); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else if (brightness[EC_LED_COLOR_GREEN] != 0) - led_set_color_battery(EC_LED_COLOR_GREEN); - else - led_set_color_battery(LED_OFF); - } else if (led_id == EC_LED_ID_POWER_LED) { - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_power(EC_LED_COLOR_WHITE); - else - led_set_color_power(LED_OFF); - } else { - return EC_ERROR_INVAL; - } - - return EC_SUCCESS; -} - -static void kodama_led_init(void) -{ - const enum mt6370_led_dim_mode dim = MT6370_LED_DIM_MODE_PWM; - const enum mt6370_led_pwm_freq freq = MT6370_LED_PWM_FREQ1000; - - mt6370_led_set_color(LED_MASK_RED | LED_MASK_GREEN | LED_MASK_WHITE); - mt6370_led_set_dim_mode(LED_RED, dim); - mt6370_led_set_dim_mode(LED_GREEN, dim); - mt6370_led_set_dim_mode(LED_WHITE, dim); - mt6370_led_set_pwm_frequency(LED_RED, freq); - mt6370_led_set_pwm_frequency(LED_GREEN, freq); - mt6370_led_set_pwm_frequency(LED_WHITE, freq); - mt6370_led_set_pwm_dim_duty(LED_RED, 12); - mt6370_led_set_pwm_dim_duty(LED_GREEN, 31); - mt6370_led_set_pwm_dim_duty(LED_WHITE, 12); - mt6370_led_set_brightness(LED_MASK_RED, 7); - mt6370_led_set_brightness(LED_MASK_GREEN, 7); - mt6370_led_set_brightness(LED_MASK_WHITE, 7); -} -DECLARE_HOOK(HOOK_INIT, kodama_led_init, HOOK_PRIO_DEFAULT); diff --git a/board/kodama/vif_override.xml b/board/kodama/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/kodama/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |