diff options
Diffstat (limited to 'board/kinox/gpio.inc')
| -rw-r--r-- | board/kinox/gpio.inc | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/board/kinox/gpio.inc b/board/kinox/gpio.inc new file mode 100644 index 0000000000..85ec312dde --- /dev/null +++ b/board/kinox/gpio.inc @@ -0,0 +1,182 @@ +/* -*- mode:c -*- + * + * Copyright 2022 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* INTERRUPT GPIOs: */ +GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH, extpower_interrupt) +GPIO_INT(EC_PROCHOT_IN_L, PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt) +GPIO_INT(EC_WP_ODL, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) +GPIO_INT(GSC_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) +GPIO_INT(SEQ_EC_ALL_SYS_PG, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SEQ_EC_DSW_PWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SEQ_EC_RSMRST_ODL, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SLP_SUS_L, PIN(F, 1), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(SYS_SLP_S0IX_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) +GPIO_INT(USB_C0_BC12_INT_ODL, PIN(C, 6), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C0_C2_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event) +GPIO_INT(USB_C0_PPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C0_RT_INT_ODL, PIN(B, 1), GPIO_INT_FALLING, retimer_interrupt) +GPIO_INT(USB_C1_BC12_INT_ODL, PIN(5, 0), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, tcpc_alert_event) +GPIO_INT(USB_C2_BC12_INT_ODL, PIN(8, 3), GPIO_INT_FALLING, bc12_interrupt) +GPIO_INT(USB_C2_PPC_INT_ODL, PIN(7, 0), GPIO_INT_FALLING, ppc_interrupt) +GPIO_INT(USB_C2_RT_INT_ODL, PIN(4, 1), GPIO_INT_FALLING, retimer_interrupt) +GPIO_INT(BJ_ADP_PRESENT_ODL, PIN(8, 2), GPIO_INT_BOTH | GPIO_PULL_UP, adp_connect_interrupt) +GPIO_INT(EC_RECOVERY_BTN_OD, PIN(2, 3), GPIO_INT_BOTH, button_interrupt) + +/* CCD */ +GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_INPUT) + +/* Security */ +GPIO(EC_ENTERING_RW, PIN(0, 3), GPIO_OUT_LOW) +GPIO(EC_GSC_PACKET_MODE, PIN(7, 5), GPIO_OUT_LOW) + +/* Fan */ +GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_HIGH) + +/* ADC, need to check the usage */ +GPIO(ANALOG_PPVAR_PWR_IN_IMON_EC, PIN(4, 2), GPIO_INPUT) + +/* Display */ +GPIO(DP_CONN_OC_ODL, PIN(2, 5), GPIO_INPUT) +GPIO(HDMI_CONN_OC_ODL, PIN(2, 4), GPIO_INPUT) + +/* BarrelJack */ +GPIO(EN_PPVAR_BJ_ADP_L, PIN(0, 7), GPIO_OUT_LOW) + +/* Chipset PCH */ +GPIO(EC_PCHHOT_ODL, PIN(7, 4), GPIO_INPUT) +GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH) +GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) +GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) +GPIO(EC_PCH_WAKE_ODL, PIN(C, 0), GPIO_ODR_HIGH) +GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) +GPIO(EN_S5_RAILS, PIN(B, 6), GPIO_OUT_LOW) +GPIO(PCH_PWROK, PIN(7, 2), GPIO_OUT_LOW) +GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH) +GPIO(VCCST_PWRGD_OD, PIN(A, 4), GPIO_ODR_LOW) +GPIO(IMVP9_VRRDY_OD, PIN(6, 0), GPIO_INPUT) +GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT) + +/* Button */ +GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH) +GPIO(GSC_EC_RECOVERY_BTN_OD, PIN(2, 2), GPIO_INPUT) + +/* NFC */ +/* TODO(b/194068530): Enable NFC */ +GPIO(NFC_COIL_ACT_L, PIN(D, 4), GPIO_INPUT) +GPIO(NFC_LOW_POWER_MODE, PIN(9, 5), GPIO_OUT_HIGH) +GPIO(NFC_CARD_DET_L, PIN(A, 3), GPIO_INPUT) +GPIO(EN_NFC_BUZZER, PIN(0, 5), GPIO_OUT_LOW) + +/* Wireless Charger */ +/* TODO(b/191418683): Implement Qi Driver */ +GPIO(EC_QI_PWR, PIN(D, 2), GPIO_OUT_HIGH) +GPIO(EC_I2C_QI_RESET_L, PIN(9, 3), GPIO_OUT_HIGH) +GPIO(EC_I2C_QI_INT_ODL, PIN(9, 6), GPIO_INPUT) + +/* HDMI CEC */ +/* TODO(b/197474873): Enable HDMI CEC */ +GPIO(HDMI_CEC_IN, PIN(4, 0), GPIO_INPUT) +GPIO(HDMI_CEC_OUT, PIN(D, 3), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN) +GPIO(HDMI_CEC_PULL_UP, PIN(C, 2), GPIO_OUT_HIGH) + +/* I2C SCL/SDA */ +GPIO(EC_I2C_QI_SCL, PIN(3, 3), GPIO_INPUT) +GPIO(EC_I2C_QI_SDA, PIN(3, 6), GPIO_INPUT) +GPIO(EC_I2C_MISC_SCL_R, PIN(B, 3), GPIO_INPUT) +GPIO(EC_I2C_MISC_SDA_R, PIN(B, 2), GPIO_INPUT) +GPIO(EC_I2C_DP_SCL, PIN(B, 5), GPIO_INPUT) +GPIO(EC_I2C_DP_SDA, PIN(B, 4), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_PPC_SCL, PIN(9, 2), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_PPC_SDA, PIN(9, 1), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_RT_SCL, PIN(D, 1), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_RT_SDA, PIN(D, 0), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_TCPC_SCL, PIN(9, 0), GPIO_INPUT) +GPIO(EC_I2C_USB_C0_C2_TCPC_SDA, PIN(8, 7), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_MIX_SCL, PIN(E, 4), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_MIX_SDA, PIN(E, 3), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_TCPC_SCL, PIN(F, 3), GPIO_INPUT) +GPIO(EC_I2C_USB_C1_TCPC_SDA, PIN(F, 2), GPIO_INPUT) + +/* USBA */ +GPIO(EN_PP5000_USBA, PIN(D, 7), GPIO_OUT_LOW) +GPIO(USB_A0_OC_ODL, PIN(3, 1), GPIO_INPUT | GPIO_PULL_UP) +GPIO(USB_A1_OC_ODL, PIN(3, 0), GPIO_INPUT | GPIO_PULL_UP) +GPIO(USB_A2_OC_ODL, PIN(2, 7), GPIO_INPUT | GPIO_PULL_UP) +GPIO(USB_A3_OC_ODL, PIN(2, 6), GPIO_INPUT | GPIO_PULL_UP) +GPIO(USB_A0_STATUS_L, PIN(2, 1), GPIO_INPUT) +GPIO(USB_A1_STATUS_L, PIN(2, 0), GPIO_INPUT) +GPIO(USB_A2_STATUS_L, PIN(1, 7), GPIO_INPUT) +GPIO(USB_A3_STATUS_L, PIN(1, 6), GPIO_INPUT) +GPIO(USB_A_LOW_PWR0_OD, PIN(1, 5), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(USB_A_LOW_PWR1_OD, PIN(1, 4), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(USB_A_LOW_PWR2_OD, PIN(1, 1), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(USB_A_LOW_PWR3_OD, PIN(1, 0), GPIO_INPUT | GPIO_PULL_DOWN) +GPIO(USB_A_OC_SOC_L, PIN(8, 0), GPIO_OUT_HIGH) + +/* LED */ +/* TODO(b/197471359): LED implementation */ +GPIO(LED_GREEN_L, PIN(C, 3), GPIO_OUT_LOW) +GPIO(LED_RED_L, PIN(C, 4), GPIO_OUT_LOW) + +/* USBC */ +GPIO(USB_C0_C2_TCPC_RST_ODL, PIN(A, 7), GPIO_ODR_LOW) +GPIO(USB_C1_FRS_EN, PIN(9, 4), GPIO_OUT_LOW) +GPIO(USB_C1_RT_INT_ODL, PIN(A, 0), GPIO_INPUT) +GPIO(USB_C1_RT_RST_R_L, PIN(0, 2), GPIO_OUT_LOW) + +/* GPIO02_P2 to PU */ +/* GPIO03_P2 to PU */ +IOEX(USB_C0_OC_ODL, EXPIN(IOEX_C0_NCT38XX, 0, 4), GPIO_ODR_HIGH) +IOEX(USB_C0_FRS_EN, EXPIN(IOEX_C0_NCT38XX, 0, 6), GPIO_LOW) +IOEX(USB_C0_RT_RST_ODL, EXPIN(IOEX_C0_NCT38XX, 0, 7), GPIO_ODR_LOW) + +IOEX(USB_C2_RT_RST_ODL, EXPIN(IOEX_C2_NCT38XX, 0, 2), GPIO_ODR_LOW) +IOEX(USB_C1_OC_ODL, EXPIN(IOEX_C2_NCT38XX, 0, 3), GPIO_ODR_HIGH) +IOEX(USB_C2_OC_ODL, EXPIN(IOEX_C2_NCT38XX, 0, 4), GPIO_ODR_HIGH) +IOEX(USB_C2_FRS_EN, EXPIN(IOEX_C2_NCT38XX, 0, 6), GPIO_LOW) +/* GPIO07_P2 to PU */ + +/* UART alternate functions */ +ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* GPIO64/CR_SIN1, GPO65/CR_SOUT1/FLPRG1_L */ + +/* I2C alternate functions */ +ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* GPIO33/I2C5_SCL0/CTS_L, GPIO36/RTS_L/I2C5_SDA0 */ +ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* GPIO87/I2C1_SDA0 */ +ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* GPIO92/I2C2_SCL0, GPIO91/I2C2_SDA0, GPIO90/I2C1_SCL0 */ +ALTERNATE(PIN_MASK(B, 0x0c), 0, MODULE_I2C, 0) /* GPIOB3/I2C7_SCL0/DCD_L, GPIOB2/I2C7_SDA0/DSR_L */ +ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* GPIOB5/I2C0_SCL0, GPIOB4/I2C0_SDA0 */ +ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* GPIOD1/I2C3_SCL0, GPIOD0/I2C3_SDA0 */ +ALTERNATE(PIN_MASK(E, 0x18), 0, MODULE_I2C, 0) /* GPIOE4/I2C6_SCL1/I3C_SCL, GPIOE3/I2C6_SDA1/I3C_SDA */ +ALTERNATE(PIN_MASK(F, 0x0c), 0, MODULE_I2C, 0) /* GPIOF3/I2C4_SCL1, GPIOF2/I2C4_SDA1 */ + +/* PWM alternate functions */ +ALTERNATE(PIN_MASK(7, 0x08), 0, MODULE_PWM, 0) /* GPIO73/TA2 */ +ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* GPIOB7/PWM5 */ +ALTERNATE(PIN_MASK(C, 0x18), 0, MODULE_PWM, 0) /* GPIOC4/PWM2, GPIOC3/PWM0 */ + +/* ADC alternate functions */ +ALTERNATE(PIN_MASK(3, 0x10), 0, MODULE_ADC, 0) /* GPIO34/PS2_DAT2/ADC6 */ +ALTERNATE(PIN_MASK(4, 0x38), 0, MODULE_ADC, 0) /* GPIO45/ADC0, GPIO44/ADC1, GPIO43/ADC2 */ +ALTERNATE(PIN_MASK(E, 0x02), 0, MODULE_ADC, 0) /* GPIOE1/ADC7 */ + +/* Unused Pins */ +UNUSED(PIN(D, 6)) /* GPOD6/CR_SOUT3/SHDF_ESPI_L */ +UNUSED(PIN(3, 2)) /* GPO32/TRIS_L */ +UNUSED(PIN(3, 5)) /* GPO35/CR_SOUT4/TEST_L */ +UNUSED(PIN(6, 6)) /* GPIO66 */ +UNUSED(PIN(8, 1)) /* GPIO81/PECI_DATA */ +UNUSED(PIN(5, 6)) /* GPIO56/CLKRUN# */ +UNUSED(PIN(9, 7)) /* GPIO97 */ +UNUSED(PIN(8, 6)) /* GPIO86/TXD/CR_SOUT2 */ +UNUSED(PIN(1, 3)) /* KSO06/GPO13/GP_SEL# */ +UNUSED(PIN(1, 2)) /* KSO07/GPO12/JEN# */ +UNUSED(PIN(0, 6)) /* KSO11/GPIO06/P80_CLK */ +UNUSED(PIN(0, 4)) /* KSO13/GPIO04 */
\ No newline at end of file |