1 files changed, 199 insertions, 0 deletions
diff --git a/board/kinox/board.c b/board/kinox/board.c
new file mode 100644
index 0000000000..0349ea2cf3
--- /dev/null
+++ b/board/kinox/board.c
@@ -0,0 +1,199 @@
+/* Copyright 2022 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#include "assert.h"
+#include "button.h"
+#include "charge_manager.h"
+#include "charge_state_v2.h"
+#include "common.h"
+#include "compile_time_macros.h"
+#include "console.h"
+#include "cros_board_info.h"
+#include "gpio.h"
+#include "gpio_signal.h"
+#include "power_button.h"
+#include "hooks.h"
+#include "power.h"
+#include "switch.h"
+#include "throttle_ap.h"
+#include "usbc_config.h"
+
+#include "gpio_list.h" /* Must come after other header files. */
+
+/* Console output macros */
+#define CPRINTF(format, args...) cprintf(CC_CHARGER, format, ## args)
+#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args)
+
+/******************************************************************************/
+/* USB-A charging control */
+
+const int usb_port_enable[USB_PORT_COUNT] = {
+	GPIO_EN_PP5000_USBA,
+};
+BUILD_ASSERT(ARRAY_SIZE(usb_port_enable) == USB_PORT_COUNT);
+
+/******************************************************************************/
+
+int board_set_active_charge_port(int port)
+{
+	CPRINTS("Requested charge port change to %d", port);
+
+	/*
+	 * The charge manager may ask us to switch to no charger if we're
+	 * running off USB-C only but upstream doesn't support PD. It requires
+	 * that we accept this switch otherwise it triggers an assert and EC
+	 * reset; it's not possible to boot the AP anyway, but we want to avoid
+	 * resetting the EC so we can continue to do the "low power" LED blink.
+	 */
+	if (port == CHARGE_PORT_NONE)
+		return EC_SUCCESS;
+
+	if (port < 0 || CHARGE_PORT_COUNT <= port)
+		return EC_ERROR_INVAL;
+
+	if (port == charge_manager_get_active_charge_port())
+		return EC_SUCCESS;
+
+	/* Don't charge from a source port */
+	if (board_vbus_source_enabled(port))
+		return EC_ERROR_INVAL;
+
+	if (!chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
+		int bj_active, bj_requested;
+
+		if (charge_manager_get_active_charge_port() != CHARGE_PORT_NONE)
+			/* Change is only permitted while the system is off */
+			return EC_ERROR_INVAL;
+
+		/*
+		 * Current setting is no charge port but the AP is on, so the
+		 * charge manager is out of sync (probably because we're
+		 * reinitializing after sysjump). Reject requests that aren't
+		 * in sync with our outputs.
+		 */
+		bj_active = !gpio_get_level(GPIO_EN_PPVAR_BJ_ADP_L);
+		bj_requested = port == CHARGE_PORT_BARRELJACK;
+		if (bj_active != bj_requested)
+			return EC_ERROR_INVAL;
+	}
+
+	CPRINTS("New charger p%d", port);
+
+	switch (port) {
+	case CHARGE_PORT_TYPEC0:
+	case CHARGE_PORT_TYPEC1:
+	case CHARGE_PORT_TYPEC2:
+		gpio_set_level(GPIO_EN_PPVAR_BJ_ADP_L, 1);
+		break;
+	case CHARGE_PORT_BARRELJACK:
+		/* Make sure BJ adapter is sourcing power */
+		if (gpio_get_level(GPIO_BJ_ADP_PRESENT_ODL))
+			return EC_ERROR_INVAL;
+		gpio_set_level(GPIO_EN_PPVAR_BJ_ADP_L, 0);
+		break;
+	default:
+		return EC_ERROR_INVAL;
+	}
+
+	return EC_SUCCESS;
+}
+
+void board_set_charge_limit(int port, int supplier, int charge_ma,
+				int max_ma, int charge_mv)
+{
+}
+
+/******************************************************************************/
+/*
+ * Barrel jack power supply handling
+ *
+ * EN_PPVAR_BJ_ADP_L must default active to ensure we can power on when the
+ * barrel jack is connected, and the USB-C port can bring the EC up fine in
+ * dead-battery mode. Both the USB-C and barrel jack switches do reverse
+ * protection, so we're safe to turn one on then the other off- but we should
+ * only do that if the system is off since it might still brown out.
+ */
+
+/*
+ * Barrel-jack power adapter ratings.
+ */
+static const struct {
+	int voltage;
+	int current;
+} bj_power[] = {
+	{ /* 0 - 135W (also default) */
+	.voltage = 19500,
+	.current = 6920
+	},
+	{ /* 1 - 230W */
+	.voltage = 19500,
+	.current = 11800
+	},
+};
+
+static unsigned int ec_config_get_bj_power(void)
+{
+	uint32_t fw_config;
+	unsigned int bj;
+
+	cbi_get_fw_config(&fw_config);
+	bj = (fw_config & EC_CFG_BJ_POWER_MASK) >> EC_CFG_BJ_POWER_L;
+	/* Out of range value defaults to 0 */
+	if (bj >= ARRAY_SIZE(bj_power))
+		bj = 0;
+	return bj;
+}
+
+#define ADP_DEBOUNCE_MS		1000  /* Debounce time for BJ plug/unplug */
+/* Debounced connection state of the barrel jack */
+static int8_t adp_connected = -1;
+static void adp_connect_deferred(void)
+{
+	struct charge_port_info pi = { 0 };
+	int connected = !gpio_get_level(GPIO_BJ_ADP_PRESENT_ODL);
+
+	/* Debounce */
+	if (connected == adp_connected)
+		return;
+	if (connected) {
+		unsigned int bj = ec_config_get_bj_power();
+
+		pi.voltage = bj_power[bj].voltage;
+		pi.current = bj_power[bj].current;
+	}
+	charge_manager_update_charge(CHARGE_SUPPLIER_DEDICATED,
+				     DEDICATED_CHARGE_PORT, &pi);
+	adp_connected = connected;
+}
+DECLARE_DEFERRED(adp_connect_deferred);
+
+/* IRQ for BJ plug/unplug. It shouldn't be called if BJ is the power source. */
+void adp_connect_interrupt(enum gpio_signal signal)
+{
+	hook_call_deferred(&adp_connect_deferred_data, ADP_DEBOUNCE_MS * MSEC);
+}
+
+static void adp_state_init(void)
+{
+	ASSERT(CHARGE_PORT_ENUM_COUNT == CHARGE_PORT_COUNT);
+	/*
+	 * Initialize all charge suppliers to 0. The charge manager waits until
+	 * all ports have reported in before doing anything.
+	 */
+	for (int i = 0; i < CHARGE_PORT_COUNT; i++) {
+		for (int j = 0; j < CHARGE_SUPPLIER_COUNT; j++)
+			charge_manager_update_charge(j, i, NULL);
+	}
+
+	/* Report charge state from the barrel jack. */
+	adp_connect_deferred();
+}
+DECLARE_HOOK(HOOK_INIT, adp_state_init, HOOK_PRIO_CHARGE_MANAGER_INIT + 1);
+
+static void board_init(void)
+{
+	gpio_enable_interrupt(GPIO_BJ_ADP_PRESENT_ODL);
+}
+DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);