diff options
Diffstat (limited to 'board/grunt')
| l--------- | board/grunt/analyzestack.yaml | 1 | ||||
| -rw-r--r-- | board/grunt/battery.c | 65 | ||||
| -rw-r--r-- | board/grunt/board.c | 78 | ||||
| -rw-r--r-- | board/grunt/board.h | 85 | ||||
| -rw-r--r-- | board/grunt/build.mk | 15 | ||||
| -rw-r--r-- | board/grunt/ec.tasklist | 25 | ||||
| -rw-r--r-- | board/grunt/gpio.inc | 115 | ||||
| -rw-r--r-- | board/grunt/led.c | 69 | ||||
| -rw-r--r-- | board/grunt/vif_override.xml | 3 |
9 files changed, 0 insertions, 456 deletions
diff --git a/board/grunt/analyzestack.yaml b/board/grunt/analyzestack.yaml deleted file mode 120000 index 9873122a08..0000000000 --- a/board/grunt/analyzestack.yaml +++ /dev/null @@ -1 +0,0 @@ -../../baseboard/grunt/analyzestack.yaml
\ No newline at end of file diff --git a/board/grunt/battery.c b/board/grunt/battery.c deleted file mode 100644 index 359ec9785b..0000000000 --- a/board/grunt/battery.c +++ /dev/null @@ -1,65 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery_fuel_gauge.h" -#include "common.h" -#include "util.h" - -/* - * Battery info for all Grunt battery types. Note that the fields - * start_charging_min/max and charging_min/max are not used for the charger. - * The effective temperature limits are given by discharging_min/max_c. - * - * Fuel Gauge (FG) parameters which are used for determining if the battery - * is connected, the appropriate ship mode (battery cutoff) command, and the - * charge/discharge FETs status. - * - * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery - * register. For some batteries, the charge/discharge FET bits are set when - * charging/discharging is active, in other types, these bits set mean that - * charging/discharging is disabled. Therefore, in addition to the mask for - * these bits, a disconnect value must be specified. Note that for TI fuel - * gauge, the charge/discharge FET status is found in Operation Status (0x54), - * but a read of Manufacturer Access (0x00) will return the lower 16 bits of - * Operation status which contains the FET status bits. - * - * The assumption for battery types supported is that the charge/discharge FET - * status can be read with a sb_read() command and therefore, only the register - * address, mask, and disconnect value need to be provided. - */ -const struct board_batt_params board_battery_info[] = { - /* Panasonic AP15O5L Battery Information */ - [BATTERY_PANASONIC] = { - .fuel_gauge = { - .manuf_name = "PANASONIC", - .ship_mode = { - .reg_addr = 0x3A, - .reg_data = { 0xC574, 0xC574 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x4000, - .disconnect_val = 0x0, - } - }, - .batt_info = { - .voltage_max = 13200, - .voltage_normal = 11550, /* mV */ - .voltage_min = 9000, /* mV */ - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 50, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = 0, - .discharging_max_c = 60, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_PANASONIC; diff --git a/board/grunt/board.c b/board/grunt/board.c deleted file mode 100644 index 45aa4f4421..0000000000 --- a/board/grunt/board.c +++ /dev/null @@ -1,78 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Grunt board-specific configuration */ - -#include "button.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/led/lm3630a.h" -#include "extpower.h" -#include "hooks.h" -#include "i2c.h" -#include "lid_switch.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "switch.h" - -#include "gpio_list.h" - -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* I2C port map. */ -const struct i2c_port_t i2c_ports[] = { - {"power", I2C_PORT_POWER, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA}, - {"tcpc0", I2C_PORT_TCPC0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"tcpc1", I2C_PORT_TCPC1, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"thermal", I2C_PORT_THERMAL_AP, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, - {"kblight", I2C_PORT_KBLIGHT, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA}, - {"sensor", I2C_PORT_SENSOR, 400, GPIO_I2C7_SCL, GPIO_I2C7_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_KBLIGHT] = { - .channel = 5, - .flags = PWM_CONFIG_DSLEEP, - .freq = 100, - }, - [PWM_CH_LED1_AMBER] = { - .channel = 0, - .flags = (PWM_CONFIG_OPEN_DRAIN | PWM_CONFIG_ACTIVE_LOW - | PWM_CONFIG_DSLEEP), - .freq = 100, - }, - [PWM_CH_LED2_BLUE] = { - .channel = 2, - .flags = (PWM_CONFIG_OPEN_DRAIN | PWM_CONFIG_ACTIVE_LOW - | PWM_CONFIG_DSLEEP), - .freq = 100, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -void board_update_sensor_config_from_sku(void) -{ - /* Enable Gyro interrupts */ - gpio_enable_interrupt(GPIO_6AXIS_INT_L); -} - -static void board_kblight_init(void) -{ - /* - * Enable keyboard backlight. This needs to be done here because - * the chip doesn't have power until PP3300_S0 comes up. - */ - gpio_set_level(GPIO_KB_BL_EN, 1); - lm3630a_poweron(); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_kblight_init, HOOK_PRIO_DEFAULT); diff --git a/board/grunt/board.h b/board/grunt/board.h deleted file mode 100644 index 2585db17fd..0000000000 --- a/board/grunt/board.h +++ /dev/null @@ -1,85 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Grunt board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -#define VARIANT_GRUNT_TCPC_0_ANX3429 - -#include "baseboard.h" - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -#define CONFIG_MKBP_USE_HOST_EVENT - -/* Work around Grunt KSI03 HW bug and rework (b/79758966) */ -#define CONFIG_KEYBOARD_REFRESH_ROW3 -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI3 - -/* Power and battery LEDs */ -#define CONFIG_LED_COMMON -#define CONFIG_CMD_LEDTEST - -#undef CONFIG_LED_PWM_NEAR_FULL_COLOR -#undef CONFIG_LED_PWM_CHARGE_ERROR_COLOR -#undef CONFIG_LED_PWM_SOC_ON_COLOR -#undef CONFIG_LED_PWM_SOC_SUSPEND_COLOR - -#define CONFIG_LED_PWM_NEAR_FULL_COLOR EC_LED_COLOR_BLUE -#define CONFIG_LED_PWM_CHARGE_ERROR_COLOR EC_LED_COLOR_AMBER -#define CONFIG_LED_PWM_SOC_ON_COLOR EC_LED_COLOR_BLUE -#define CONFIG_LED_PWM_SOC_SUSPEND_COLOR EC_LED_COLOR_BLUE - -#define CONFIG_LED_PWM_COUNT 1 - -#define I2C_PORT_KBLIGHT NPCX_I2C_PORT5_0 - -/* KB backlight driver */ -#define CONFIG_LED_DRIVER_LM3630A - -/* Motion sensing drivers */ -#define CONFIG_ACCELGYRO_BMI160 -#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ - TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) -#define CONFIG_ACCEL_INTERRUPTS -#define CONFIG_ACCEL_KX022 -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_TABLET_MODE -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL -/* - * Slew rate on the PP1800_SENSOR load switch requires a short delay on startup. - */ -#undef CONFIG_MOTION_SENSE_RESUME_DELAY_US -#define CONFIG_MOTION_SENSE_RESUME_DELAY_US (10 * MSEC) - -#ifndef __ASSEMBLER__ - -enum pwm_channel { - PWM_CH_KBLIGHT = 0, - PWM_CH_LED1_AMBER, - PWM_CH_LED2_BLUE, - PWM_CH_COUNT -}; - -enum battery_type { - BATTERY_PANASONIC, - BATTERY_TYPE_COUNT, -}; - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ diff --git a/board/grunt/build.mk b/board/grunt/build.mk deleted file mode 100644 index c808e65aed..0000000000 --- a/board/grunt/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2015 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Board specific files build -# - -CHIP:=npcx -CHIP_FAMILY:=npcx7 -CHIP_VARIANT:=npcx7m6f -BASEBOARD:=grunt - -board-y=board.o led.o -board-$(CONFIG_BATTERY_SMART)+=battery.o diff --git a/board/grunt/ec.tasklist b/board/grunt/ec.tasklist deleted file mode 100644 index dc898c4502..0000000000 --- a/board/grunt/ec.tasklist +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * See CONFIG_TASK_LIST in config.h for details. - */ - -#define CONFIG_TASK_LIST \ - TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \ - TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, TASK_STACK_SIZE) \ - TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \ - TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \ - TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE) diff --git a/board/grunt/gpio.inc b/board/grunt/gpio.inc deleted file mode 100644 index 97f5afabfd..0000000000 --- a/board/grunt/gpio.inc +++ /dev/null @@ -1,115 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Declare symbolic names for all the GPIOs that we care about. - * Note: Those with interrupt handlers must be declared first. */ - -GPIO_INT(USB_C0_PD_INT_ODL, PIN(A, 0), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_PD_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C0_SWCTL_INT_ODL, PIN(0, 3), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C1_SWCTL_INT_ODL, PIN(D, 4), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(PCH_SLP_S3_L, PIN(A, 6), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(PCH_SLP_S5_L, PIN(A, 3), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(S0_PGOOD, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) -GPIO_INT(S5_PGOOD, PIN(6, 3), GPIO_INT_BOTH | GPIO_PULL_UP, power_signal_interrupt) -GPIO_INT(POWER_BUTTON_L, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) -GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH | GPIO_PULL_UP, lid_interrupt) -GPIO_INT(AC_PRESENT, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) -GPIO_INT(WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) -GPIO_INT(VOLUME_DOWN_L, PIN(7, 0), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(VOLUME_UP_L, PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) -GPIO_INT(USB_C0_CABLE_DET, PIN(3, 7), GPIO_INT_RISING, anx74xx_cable_det_interrupt) -GPIO_INT(6AXIS_INT_L, PIN(8, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt) - -GPIO(EN_PWR_A, PIN(E, 2), GPIO_OUT_LOW) /* Enable Power */ -GPIO(EN_PP1800_SENSOR, PIN(6, 7), GPIO_OUT_LOW) /* Enable Power */ -GPIO(ENABLE_BACKLIGHT_L, PIN(D, 3), GPIO_OUT_HIGH) /* Enable Backlight */ -GPIO(PCH_RSMRST_L, PIN(C, 2), GPIO_OUT_LOW) /* RSMRST# to SOC */ -GPIO(PCH_PWRBTN_L, PIN(C, 1), GPIO_OUT_HIGH) /* Power Button to SOC */ -GPIO(PCH_WAKE_L, PIN(7, 4), GPIO_OUT_HIGH) /* Wake SOC */ -GPIO(SYS_RESET_L, PIN(0, 2), GPIO_ODR_HIGH) /* Cold Reset to SOC */ -GPIO(CCD_MODE_ODL, PIN(E, 3), GPIO_INPUT) /* Case Closed Debug Mode */ -GPIO(ENTERING_RW, PIN(E, 1), GPIO_OUT_LOW) /* EC Entering RW */ -GPIO(EC_BATT_PRES_L, PIN(E, 5), GPIO_INPUT | GPIO_PULL_UP) /* Battery Present */ -GPIO(PCH_SYS_PWROK, PIN(D, 6), GPIO_OUT_LOW) /* Power OK to SOC */ -GPIO(EC_APU_RST, PIN(E, 4), GPIO_INPUT) /* Reset to SOC */ -GPIO(CPU_PROCHOT, PIN(3, 4), GPIO_INPUT | GPIO_SEL_1P8V) /* PROCHOT to SOC */ -GPIO(APU_ALERT_L, PIN(A, 2), GPIO_INPUT) /* Alert to SOC */ -GPIO(3AXIS_INT_L, PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* 3 Axis Accel */ -GPIO(KB_BL_EN, PIN(F, 2), GPIO_OUT_LOW) /* Enable KB Backlight */ - -/* I2C pins - these will be reconfigured for alternate function below */ -GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C_POWER_SCL */ -GPIO(I2C0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C_POWER_SDA */ -GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SCL */ -GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SDA */ -GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C_USB_C1_PD_SCL */ -GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C_USB_C1_PD_SDA */ -GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT | GPIO_SEL_1P8V) /* APU_SIC */ -GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT | GPIO_SEL_1P8V) /* APU_SID */ -GPIO(I2C5_SCL, PIN(3, 3), GPIO_INPUT) /* EC_I2C_EEPROM_SCL and - EC_I2C_KB_BL_SCL */ -GPIO(I2C5_SDA, PIN(3, 6), GPIO_INPUT) /* EC_I2C_EEPROM_SDA and - EC_I2C_KB_BL_SDA */ -GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C_SENSOR_SCL */ -GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C_SENSOR_SDA */ - -/* - * The NPCX LPC driver configures and controls SCI and SMI, - * so PCH_SCI_ODL [PIN(7, 6)] and PCH_SMI_ODL [PIN(C, 6)] are - * not defined here as GPIOs. - */ -GPIO(PCH_SLP_S0_L, PIN(A, 4), GPIO_INPUT) - -GPIO(EN_USB_A0_5V, PIN(6, 1), GPIO_OUT_LOW) /* Enable A0 5V Charging */ -GPIO(EN_USB_A1_5V, PIN(C, 0), GPIO_OUT_LOW) /* Enable A1 5V Charging */ -GPIO(EN_USB_C0_TCPC_PWR, PIN(6, 0), GPIO_OUT_LOW) /* Enable C0 TCPC Power */ -GPIO(USB_C0_OC_L, PIN(7, 3), GPIO_OUT_HIGH) /* C0 Over Current */ -GPIO(USB_C1_OC_L, PIN(7, 2), GPIO_OUT_HIGH) /* C1 Over Current */ -GPIO(USB_C0_PD_RST_L, PIN(3, 2), GPIO_OUT_HIGH) /* C0 PD Reset */ -GPIO(USB_C1_PD_RST_L, PIN(D, 5), GPIO_OUT_HIGH) /* C1 PD Reset */ -GPIO(USB_C0_BC12_VBUS_ON_L, PIN(4, 0), GPIO_ODR_HIGH) /* C0 BC1.2 Power */ -GPIO(USB_C1_BC12_VBUS_ON_L, PIN(B, 1), GPIO_ODR_HIGH | GPIO_PULL_UP) /* C1 BC1.2 Power */ -GPIO(USB_C0_BC12_CHG_DET, PIN(6, 2), GPIO_INPUT) /* C0 BC1.2 Detect */ -GPIO(USB_C1_BC12_CHG_DET, PIN(8, 3), GPIO_INPUT | GPIO_PULL_DOWN) /* C1 BC1.2 Detect */ -GPIO(USB_C0_DP_HPD, PIN(9, 5), GPIO_OUT_LOW) /* C0 DP Hotplug Detect */ -GPIO(USB_C1_DP_HPD, PIN(9, 6), GPIO_OUT_LOW) /* C1 DP Hotplug Detect */ - -/* Board ID */ -GPIO(BOARD_VERSION1, PIN(C, 7), GPIO_INPUT) -GPIO(BOARD_VERSION2, PIN(9, 3), GPIO_INPUT) -GPIO(BOARD_VERSION3, PIN(8, 0), GPIO_INPUT) -GPIO(SKU_ID1, PIN(F, 0), GPIO_INPUT) -GPIO(SKU_ID2, PIN(4, 1), GPIO_INPUT) - -/* Alternate functions GPIO definitions */ -/* Cr50 requires no pull-ups on UART pins. */ -ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */ -ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* I2C0 */ -ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ -ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */ -ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3 */ -ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5 */ -ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0) /* I2C7 */ -ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */ -ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0) /* ADC4 */ -ALTERNATE(PIN_MASK(F, 0x02), 0, MODULE_ADC, 0) /* ADC8 */ -ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0) /* ADC9 */ -ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* KB Backlight */ -ALTERNATE(PIN_MASK(C, 0x18), 0, MODULE_PWM, 0) /* LED 1 & 2 */ - -/* Keyboard Pins */ -ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */ -ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_02-07 */ -ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ -GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ -ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */ -ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-12 */ - -/* Power Switch Logic (PSL) inputs */ -ALTERNATE(PIN_MASK(0, 0x03), 0, MODULE_PMU, 0) /* GPIO00, GPIO01 */ -ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0) /* GPIOD2 */ diff --git a/board/grunt/led.c b/board/grunt/led.c deleted file mode 100644 index 824ec55f6c..0000000000 --- a/board/grunt/led.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "ec_commands.h" -#include "led_pwm.h" -#include "pwm.h" -#include "util.h" - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_POWER_LED, -}; -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -/* - * We only have a blue and an amber LED, so setting any other colour results in - * both LEDs being off. - */ -struct pwm_led_color_map led_color_map[EC_LED_COLOR_COUNT] = { - /* Amber, Blue */ - [EC_LED_COLOR_RED] = { 0, 0 }, - [EC_LED_COLOR_GREEN] = { 0, 0 }, - [EC_LED_COLOR_BLUE] = { 0, 100 }, - [EC_LED_COLOR_YELLOW] = { 0, 0 }, - [EC_LED_COLOR_WHITE] = { 0, 0 }, - [EC_LED_COLOR_AMBER] = { 100, 0 }, -}; - -/* One logical LED with amber and blue channels. */ -struct pwm_led pwm_leds[CONFIG_LED_PWM_COUNT] = { - { - .ch0 = PWM_CH_LED1_AMBER, - .ch1 = PWM_CH_LED2_BLUE, - .ch2 = PWM_LED_NO_CHANNEL, - .enable = &pwm_enable, - .set_duty = &pwm_set_duty, - }, -}; - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - memset(brightness_range, '\0', - sizeof(*brightness_range) * EC_LED_COLOR_COUNT); - brightness_range[EC_LED_COLOR_AMBER] = 100; - brightness_range[EC_LED_COLOR_BLUE] = 100; -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - enum pwm_led_id pwm_id; - - /* Convert ec_led_id to pwm_led_id. */ - if (led_id == EC_LED_ID_POWER_LED) - pwm_id = PWM_LED0; - else - return EC_ERROR_UNKNOWN; - - if (brightness[EC_LED_COLOR_BLUE]) - set_pwm_led_color(pwm_id, EC_LED_COLOR_BLUE); - else if (brightness[EC_LED_COLOR_AMBER]) - set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER); - else - /* Otherwise, the "color" is "off". */ - set_pwm_led_color(pwm_id, -1); - - return EC_SUCCESS; -} diff --git a/board/grunt/vif_override.xml b/board/grunt/vif_override.xml deleted file mode 100644 index 32736caf64..0000000000 --- a/board/grunt/vif_override.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- Add VIF field overrides here. See genvif.c and the Vendor Info File - Definition from the USB-IF. ---> |