diff options
| -rw-r--r-- | board/kohaku/gpio.inc | 33 |
1 files changed, 29 insertions, 4 deletions
diff --git a/board/kohaku/gpio.inc b/board/kohaku/gpio.inc index 534d10bdd4..5d227a3148 100644 --- a/board/kohaku/gpio.inc +++ b/board/kohaku/gpio.inc @@ -48,6 +48,7 @@ GPIO(EN_PP5000_A, PIN(A, 4), GPIO_OUT_LOW) GPIO(EN_A_RAILS, PIN(A, 3), GPIO_OUT_LOW) GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) +GPIO(EC_PROCHOT_IN_OD, PIN(3, 4), GPIO_INPUT) GPIO(PP5000_A_PG_OD, PIN(D, 7), GPIO_INPUT) GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT) @@ -69,11 +70,23 @@ GPIO(EC_BATT_PRES_ODL, PIN(E, 1), GPIO_INPUT) GPIO(LED_1_L, PIN(C, 4), GPIO_OUT_HIGH) /* Yellow (hatch) */ GPIO(LED_2_L, PIN(C, 3), GPIO_OUT_HIGH) /* White (hatch) */ GPIO(LED_3_L, PIN(C, 2), GPIO_OUT_HIGH) -GPIO(LED_4_L, PIN(6, 0), GPIO_OUT_HIGH) GPIO(EC_KB_BL_EN, PIN(8, 6), GPIO_OUT_LOW) /* Keyboard backlight */ -GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_LOW) GPIO(EN_MST, PIN(9, 6), GPIO_OUT_LOW) +GPIO(LID_ACCEL_INT_L, PIN(5, 0), GPIO_INPUT | /* Lid accelerometer */ + GPIO_SEL_1P8V) +/* + * TODO: b/130822500 + * Configured as if it were NC for now + */ +GPIO(M2_SD_PLN, PIN(A, 0), GPIO_INPUT | /* Provide SSD a shutdown warning */ + GPIO_PULL_UP) + +/* + * TODO: b/130824532 + * Configured as if it were NC for now (but has external 1K pulldown) + */ +GPIO(IMVP8_PE, PIN(A, 7), GPIO_INPUT) /* Pull high to flash MPS part */ /* I2C pins - Alternate function below configures I2C module on these pins */ GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT | @@ -91,6 +104,20 @@ GPIO(I2C5_SDA, PIN(3, 6), GPIO_INPUT) /* EC_I2C_POWER_ GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C_EEPROM_SCL */ GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C_EEPROM_SDA */ +/* NC / TP */ +GPIO(TP62, PIN(7, 2), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP58, PIN(0, 4), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP73, PIN(8, 2), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP17, PIN(B, 7), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP18, PIN(C, 0), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP54, PIN(4, 0), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP56, PIN(6, 1), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP57, PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP55, PIN(7, 3), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP59, PIN(B, 0), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP64, PIN(D, 3), GPIO_INPUT | GPIO_PULL_UP) +GPIO(TP60, PIN(6, 0), GPIO_INPUT | GPIO_PULL_UP) + /* Keyboard pins */ #define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP) GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ @@ -114,8 +141,6 @@ ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UA /* PWM */ ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* PWM3 - Keyboard backlight */ -ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* PWM5 - FAN */ -ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* TA1 - Fan Tachometer */ /* ADC */ ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */ |