summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/lick/battery.c119
-rw-r--r--board/lick/board.c295
-rw-r--r--board/lick/board.h90
-rw-r--r--board/lick/build.mk15
-rw-r--r--board/lick/ec.tasklist26
-rw-r--r--board/lick/gpio.inc199
-rw-r--r--board/lick/led.c112
7 files changed, 856 insertions, 0 deletions
diff --git a/board/lick/battery.c b/board/lick/battery.c
new file mode 100644
index 0000000000..2a23be64cc
--- /dev/null
+++ b/board/lick/battery.c
@@ -0,0 +1,119 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Battery pack vendor provided charging profile
+ */
+
+#include "battery_fuel_gauge.h"
+#include "common.h"
+#include "util.h"
+
+/*
+ * Battery info for all lick battery types. Note that the fields
+ * start_charging_min/max and charging_min/max are not used for the charger.
+ * The effective temperature limits are given by discharging_min/max_c.
+ *
+ * Fuel Gauge (FG) parameters which are used for determining if the battery
+ * is connected, the appropriate ship mode (battery cutoff) command, and the
+ * charge/discharge FETs status.
+ *
+ * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
+ * register. For some batteries, the charge/discharge FET bits are set when
+ * charging/discharging is active, in other types, these bits set mean that
+ * charging/discharging is disabled. Therefore, in addition to the mask for
+ * these bits, a disconnect value must be specified. Note that for TI fuel
+ * gauge, the charge/discharge FET status is found in Operation Status (0x54),
+ * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
+ * Operation status which contains the FET status bits.
+ *
+ * The assumption for battery types supported is that the charge/discharge FET
+ * status can be read with a sb_read() command and therefore, only the register
+ * address, mask, and disconnect value need to be provided.
+ */
+const struct board_batt_params board_battery_info[] = {
+ /* SMP 5B10Q13163 */
+ [BATTERY_SMP] = {
+ .fuel_gauge = {
+ .manuf_name = "SMP",
+ .ship_mode = {
+ .reg_addr = 0x34,
+ .reg_data = { 0x0000, 0x1000 },
+ },
+ .fet = {
+ .reg_addr = 0x34,
+ .reg_mask = 0x0100,
+ .disconnect_val = 0x0100,
+ }
+ },
+ .batt_info = {
+ .voltage_max = 13050, /* mV */
+ .voltage_normal = 11250, /* mV */
+ .voltage_min = 9000, /* mV */
+ .precharge_current = 186, /* mA */
+ .start_charging_min_c = 0,
+ .start_charging_max_c = 50,
+ .charging_min_c = 0,
+ .charging_max_c = 60,
+ .discharging_min_c = -20,
+ .discharging_max_c = 60,
+ },
+ },
+ /* LGC 5B10Q13162 */
+ [BATTERY_LGC] = {
+ .fuel_gauge = {
+ .manuf_name = "LGC",
+ .ship_mode = {
+ .reg_addr = 0x34,
+ .reg_data = { 0x0000, 0x1000 },
+ },
+ .fet = {
+ .reg_addr = 0x34,
+ .reg_mask = 0x0100,
+ .disconnect_val = 0x0100,
+ }
+ },
+ .batt_info = {
+ .voltage_max = 13050, /* mV */
+ .voltage_normal = 11400, /* mV */
+ .voltage_min = 9000, /* mV */
+ .precharge_current = 181, /* mA */
+ .start_charging_min_c = 0,
+ .start_charging_max_c = 50,
+ .charging_min_c = 0,
+ .charging_max_c = 60,
+ .discharging_min_c = -20,
+ .discharging_max_c = 73,
+ },
+ },
+ /* Sunwoda L18D3PG1 */
+ [BATTERY_SUNWODA] = {
+ .fuel_gauge = {
+ .manuf_name = "SUNWODA",
+ .ship_mode = {
+ .reg_addr = 0x34,
+ .reg_data = { 0x0000, 0x1000 },
+ },
+ .fet = {
+ .reg_addr = 0x34,
+ .reg_mask = 0x0100,
+ .disconnect_val = 0x0100,
+ }
+ },
+ .batt_info = {
+ .voltage_max = 13050, /* mV */
+ .voltage_normal = 11250, /* mV */
+ .voltage_min = 9000, /* mV */
+ .precharge_current = 200, /* mA */
+ .start_charging_min_c = 0,
+ .start_charging_max_c = 50,
+ .charging_min_c = 0,
+ .charging_max_c = 60,
+ .discharging_min_c = -20,
+ .discharging_max_c = 60,
+ },
+ },
+};
+BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
+
+const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_PANASONIC;
diff --git a/board/lick/board.c b/board/lick/board.c
new file mode 100644
index 0000000000..60e56d4cce
--- /dev/null
+++ b/board/lick/board.c
@@ -0,0 +1,295 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Lick board-specific configuration */
+
+#include "adc.h"
+#include "adc_chip.h"
+#include "button.h"
+#include "charge_state.h"
+#include "common.h"
+#include "console.h"
+#include "cros_board_info.h"
+#include "driver/accel_lis2dh.h"
+#include "driver/accelgyro_lsm6dsm.h"
+#include "driver/ppc/nx20p348x.h"
+#include "driver/tcpm/anx7447.h"
+#include "extpower.h"
+#include "gpio.h"
+#include "hooks.h"
+#include "keyboard_scan.h"
+#include "lid_switch.h"
+#include "power.h"
+#include "power_button.h"
+#include "switch.h"
+#include "task.h"
+#include "tablet_mode.h"
+#include "tcpci.h"
+#include "temp_sensor.h"
+#include "thermistor.h"
+#include "util.h"
+#include "battery_smart.h"
+
+#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args)
+#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args)
+
+#define USB_PD_PORT_ANX7447 0
+#define USB_PD_PORT_PS8751 1
+
+static uint8_t sku_id;
+
+static void ppc_interrupt(enum gpio_signal signal)
+{
+ switch (signal) {
+ case GPIO_USB_PD_C0_INT_ODL:
+ nx20p348x_interrupt(0);
+ break;
+
+ case GPIO_USB_PD_C1_INT_ODL:
+ nx20p348x_interrupt(1);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/* Must come after other header files and GPIO interrupts*/
+#include "gpio_list.h"
+
+/* ADC channels */
+const struct adc_t adc_channels[] = {
+ [ADC_TEMP_SENSOR_AMB] = {
+ "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
+ [ADC_TEMP_SENSOR_CHARGER] = {
+ "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0},
+ /* Vbus sensing (1/10 voltage divider). */
+ [ADC_VBUS_C0] = {
+ "VBUS_C0", NPCX_ADC_CH9, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
+ [ADC_VBUS_C1] = {
+ "VBUS_C1", NPCX_ADC_CH4, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0},
+};
+BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
+
+const struct temp_sensor_t temp_sensors[] = {
+ [TEMP_SENSOR_BATTERY] = {.name = "Battery",
+ .type = TEMP_SENSOR_TYPE_BATTERY,
+ .read = charge_get_battery_temp,
+ .idx = 0,
+ .action_delay_sec = 1},
+ [TEMP_SENSOR_AMBIENT] = {.name = "Ambient",
+ .type = TEMP_SENSOR_TYPE_BOARD,
+ .read = get_temp_3v3_51k1_47k_4050b,
+ .idx = ADC_TEMP_SENSOR_AMB,
+ .action_delay_sec = 5},
+ [TEMP_SENSOR_CHARGER] = {.name = "Charger",
+ .type = TEMP_SENSOR_TYPE_BOARD,
+ .read = get_temp_3v3_13k7_47k_4050b,
+ .idx = ADC_TEMP_SENSOR_CHARGER,
+ .action_delay_sec = 1},
+};
+BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
+
+/* Motion sensors */
+/* Mutexes */
+static struct mutex g_lid_mutex;
+static struct mutex g_base_mutex;
+
+/* Matrix to rotate lid and base sensor into standard reference frame */
+const mat33_fp_t standard_rot_ref = {
+ { FLOAT_TO_FP(-1), 0, 0},
+ { 0, FLOAT_TO_FP(-1), 0},
+ { 0, 0, FLOAT_TO_FP(1)}
+};
+
+/* sensor private data */
+static struct stprivate_data g_lis2dh_data;
+static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;
+
+/* Drivers */
+struct motion_sensor_t motion_sensors[] = {
+ [LID_ACCEL] = {
+ .name = "Lid Accel",
+ .active_mask = SENSOR_ACTIVE_S0_S3,
+ .chip = MOTIONSENSE_CHIP_LIS2DE,
+ .type = MOTIONSENSE_TYPE_ACCEL,
+ .location = MOTIONSENSE_LOC_LID,
+ .drv = &lis2dh_drv,
+ .mutex = &g_lid_mutex,
+ .drv_data = &g_lis2dh_data,
+ .port = I2C_PORT_SENSOR,
+ .i2c_spi_addr_flags = LIS2DH_ADDR1_FLAGS,
+ .rot_standard_ref = &standard_rot_ref,
+ /* We only use 2g because its resolution is only 8-bits */
+ .default_range = 2, /* g */
+ .min_frequency = LIS2DH_ODR_MIN_VAL,
+ .max_frequency = LIS2DH_ODR_MAX_VAL,
+ .config = {
+ /* EC use accel for angle detection */
+ [SENSOR_CONFIG_EC_S0] = {
+ .odr = 10000 | ROUND_UP_FLAG,
+ },
+ /* Sensor on for lid angle detection */
+ [SENSOR_CONFIG_EC_S3] = {
+ .odr = 10000 | ROUND_UP_FLAG,
+ },
+ },
+ },
+
+ [BASE_ACCEL] = {
+ .name = "Base Accel",
+ .active_mask = SENSOR_ACTIVE_S0_S3,
+ .chip = MOTIONSENSE_CHIP_LSM6DSM,
+ .type = MOTIONSENSE_TYPE_ACCEL,
+ .location = MOTIONSENSE_LOC_BASE,
+ .drv = &lsm6dsm_drv,
+ .mutex = &g_base_mutex,
+ .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
+ MOTIONSENSE_TYPE_ACCEL),
+ .int_signal = GPIO_BASE_SIXAXIS_INT_L,
+ .flags = MOTIONSENSE_FLAG_INT_SIGNAL,
+ .port = I2C_PORT_SENSOR,
+ .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
+ .rot_standard_ref = &standard_rot_ref,
+ .default_range = 4, /* g */
+ .min_frequency = LSM6DSM_ODR_MIN_VAL,
+ .max_frequency = LSM6DSM_ODR_MAX_VAL,
+ .config = {
+ /* EC use accel for angle detection */
+ [SENSOR_CONFIG_EC_S0] = {
+ .odr = 13000 | ROUND_UP_FLAG,
+ .ec_rate = 100 * MSEC,
+ },
+ /* Sensor on for angle detection */
+ [SENSOR_CONFIG_EC_S3] = {
+ .odr = 10000 | ROUND_UP_FLAG,
+ .ec_rate = 100 * MSEC,
+ },
+ },
+ },
+
+ [BASE_GYRO] = {
+ .name = "Base Gyro",
+ .active_mask = SENSOR_ACTIVE_S0_S3,
+ .chip = MOTIONSENSE_CHIP_LSM6DSM,
+ .type = MOTIONSENSE_TYPE_GYRO,
+ .location = MOTIONSENSE_LOC_BASE,
+ .drv = &lsm6dsm_drv,
+ .mutex = &g_base_mutex,
+ .drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
+ MOTIONSENSE_TYPE_GYRO),
+ .int_signal = GPIO_BASE_SIXAXIS_INT_L,
+ .flags = MOTIONSENSE_FLAG_INT_SIGNAL,
+ .port = I2C_PORT_SENSOR,
+ .i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
+ .default_range = 1000 | ROUND_UP_FLAG, /* dps */
+ .rot_standard_ref = &standard_rot_ref,
+ .min_frequency = LSM6DSM_ODR_MIN_VAL,
+ .max_frequency = LSM6DSM_ODR_MAX_VAL,
+ },
+};
+
+unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
+
+static int board_is_convertible(void)
+{
+ return sku_id != 255;
+}
+
+static void board_update_sensor_config_from_sku(void)
+{
+ motion_sensor_count = 0;
+ gmr_tablet_switch_disable();
+ /* Base accel is not stuffed, don't allow line to float */
+ gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
+ GPIO_INPUT | GPIO_PULL_DOWN);
+}
+
+static void cbi_init(void)
+{
+ uint32_t val;
+
+ if (cbi_get_sku_id(&val) == EC_SUCCESS)
+ sku_id = val;
+ ccprints("SKU: 0x%04x", sku_id);
+
+ board_update_sensor_config_from_sku();
+}
+DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1);
+
+#ifndef TEST_BUILD
+/* This callback disables keyboard when convertibles are fully open */
+void lid_angle_peripheral_enable(int enable)
+{
+ /*
+ * If the lid is in tablet position via other sensors,
+ * ignore the lid angle, which might be faulty then
+ * disable keyboard.
+ */
+ if (tablet_get_mode())
+ enable = 0;
+
+ if (board_is_convertible())
+ keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE);
+}
+#endif
+
+int board_is_lid_angle_tablet_mode(void)
+{
+ return board_is_convertible();
+}
+
+/* Battery functions */
+#define SB_OPTIONALMFG_FUNCTION2 0x3e
+/* Optional mfg function2 */
+#define SMART_QUICK_CHARGE (1<<12)
+/* Quick charge support */
+#define MODE_QUICK_CHARGE_SUPPORT (1<<4)
+
+static void sb_quick_charge_mode(int enable)
+{
+ int val, rv;
+
+ rv = sb_read(SB_BATTERY_MODE, &val);
+ if (rv || !(val & MODE_QUICK_CHARGE_SUPPORT))
+ return;
+
+ rv = sb_read(SB_OPTIONALMFG_FUNCTION2, &val);
+ if (rv)
+ return;
+
+ if (enable)
+ val |= SMART_QUICK_CHARGE;
+ else
+ val &= ~SMART_QUICK_CHARGE;
+
+ sb_write(SB_OPTIONALMFG_FUNCTION2, val);
+}
+
+/* Called on AP S3/S0ix -> S0 transition */
+static void board_chipset_resume(void)
+{
+ /* Normal charge current */
+ sb_quick_charge_mode(0);
+}
+DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);
+
+/* Called on AP S0 -> S3/S0ix transition */
+static void board_chipset_suspend(void)
+{
+ /* Quick charge current */
+ sb_quick_charge_mode(1);
+}
+DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);
+
+void board_overcurrent_event(int port, int is_overcurrented)
+{
+ /* Sanity check the port. */
+ if ((port < 0) || (port >= CONFIG_USB_PD_PORT_MAX_COUNT))
+ return;
+
+ /* Note that the level is inverted because the pin is active low. */
+ gpio_set_level(GPIO_USB_C_OC, !is_overcurrented);
+}
diff --git a/board/lick/board.h b/board/lick/board.h
new file mode 100644
index 0000000000..98a0e01ec8
--- /dev/null
+++ b/board/lick/board.h
@@ -0,0 +1,90 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Lick board configuration */
+
+#ifndef __CROS_EC_BOARD_H
+#define __CROS_EC_BOARD_H
+
+/* Select Baseboard features */
+#define VARIANT_OCTOPUS_EC_NPCX796FB
+#define VARIANT_OCTOPUS_CHARGER_ISL9238
+#include "baseboard.h"
+
+#define CONFIG_VOLUME_BUTTONS
+#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
+#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
+
+#define CONFIG_LED_COMMON
+#define CONFIG_LED_POWER_LED
+#define CONFIG_TEMP_SENSOR
+#define CONFIG_THERMISTOR
+#define CONFIG_STEINHART_HART_3V3_13K7_47K_4050B
+#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
+
+/* EC console commands */
+#define CONFIG_CMD_ACCELS
+#define CONFIG_CMD_ACCEL_INFO
+
+/* Sensors */
+#define CONFIG_ACCEL_LIS2DE /* Lid accel */
+#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */
+/* Sensors without hardware FIFO are in forced mode */
+#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
+
+#define CONFIG_LID_ANGLE
+#define CONFIG_LID_ANGLE_UPDATE
+#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
+#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
+
+#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
+ TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
+
+#ifndef __ASSEMBLER__
+
+#include "gpio_signal.h"
+#include "registers.h"
+
+enum adc_channel {
+ ADC_TEMP_SENSOR_AMB, /* ADC0 */
+ ADC_TEMP_SENSOR_CHARGER, /* ADC1 */
+ ADC_VBUS_C0, /* ADC9 */
+ ADC_VBUS_C1, /* ADC4 */
+ ADC_CH_COUNT,
+};
+
+enum temp_sensor_id {
+ TEMP_SENSOR_BATTERY,
+ TEMP_SENSOR_AMBIENT,
+ TEMP_SENSOR_CHARGER,
+ TEMP_SENSOR_COUNT
+};
+
+enum pwm_channel {
+ PWM_CH_KBLIGHT,
+ PWM_CH_COUNT
+};
+
+/* Motion sensors */
+enum sensor_id {
+ LID_ACCEL,
+ BASE_ACCEL,
+ BASE_GYRO,
+ SENSOR_COUNT
+};
+
+/* List of possible batteries */
+enum battery_type {
+ BATTERY_PANASONIC,
+ BATTERY_SMP,
+ BATTERY_LGC,
+ BATTERY_SUNWODA,
+ BATTERY_TYPE_COUNT,
+};
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __CROS_EC_BOARD_H */
diff --git a/board/lick/build.mk b/board/lick/build.mk
new file mode 100644
index 0000000000..137e208b53
--- /dev/null
+++ b/board/lick/build.mk
@@ -0,0 +1,15 @@
+# -*- makefile -*-
+# Copyright 2019 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+#
+# Board specific files build
+#
+
+CHIP:=npcx
+CHIP_FAMILY:=npcx7
+CHIP_VARIANT:=npcx7m6fb
+BASEBOARD:=octopus
+
+board-y=board.o led.o
+board-$(CONFIG_BATTERY_SMART)+=battery.o
diff --git a/board/lick/ec.tasklist b/board/lick/ec.tasklist
new file mode 100644
index 0000000000..d59bbccc71
--- /dev/null
+++ b/board/lick/ec.tasklist
@@ -0,0 +1,26 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/*
+ * See CONFIG_TASK_LIST in config.h for details.
+ */
+
+#define CONFIG_TASK_LIST \
+ TASK_ALWAYS(HOOKS, hook_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, LARGER_TASK_STACK_SIZE) \
+ TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 1, LARGER_TASK_STACK_SIZE) \
+ TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_NOTEST(CHIPSET, chipset_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
+ TASK_NOTEST(PDCMD, pd_command_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(HOSTCMD, host_command_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(POWERBTN, power_button_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, VENTI_TASK_STACK_SIZE) \
+ TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, VENTI_TASK_STACK_SIZE)
diff --git a/board/lick/gpio.inc b/board/lick/gpio.inc
new file mode 100644
index 0000000000..ad6773a211
--- /dev/null
+++ b/board/lick/gpio.inc
@@ -0,0 +1,199 @@
+/* -*- mode:c -*-
+ *
+ * Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Declare symbolic names for all the GPIOs that we care about.
+ * Note: Those with interrupt handlers must be declared first. */
+
+/* Wake Source interrupts */
+GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH |
+ GPIO_HIB_WAKE_HIGH, lid_interrupt)
+/*
+ * High-to-low transition on POWER_BUTTON_L is treated as a wake event from
+ * hibernate. Absence of GPIO_HIB_WAKE_HIGH flag is treated as wake on
+ * high-to-low edge.
+ */
+GPIO_INT(POWER_BUTTON_L, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) /* MECH_PWR_BTN_ODL */
+GPIO_INT(AC_PRESENT, PIN(0, 0), GPIO_INT_BOTH |
+ GPIO_HIB_WAKE_HIGH, extpower_interrupt) /* ACOK_OD */
+GPIO_INT(EC_VOLUP_BTN_ODL, PIN(7, 5), GPIO_INT_BOTH, button_interrupt)
+GPIO_INT(EC_VOLDN_BTN_ODL, PIN(4, 0), GPIO_INT_BOTH, button_interrupt)
+
+/* USB-C interrupts */
+GPIO_INT(USB_C0_MUX_INT_ODL, PIN(6, 1), GPIO_INT_FALLING, tcpc_alert_event)
+GPIO_INT(USB_C1_MUX_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event)
+GPIO_INT(USB_PD_C0_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, ppc_interrupt)
+GPIO_INT(USB_PD_C1_INT_ODL, PIN(F, 1), GPIO_INT_FALLING, ppc_interrupt)
+
+/* Power State interrupts */
+#ifdef CONFIG_POWER_S0IX
+GPIO_INT(PCH_SLP_S0_L, PIN(A, 4), GPIO_INT_BOTH, power_signal_interrupt) /* SLP_S0_L */
+#endif
+GPIO_INT(PCH_SLP_S4_L, PIN(A, 3), GPIO_INT_BOTH, power_signal_interrupt) /* SLP_S4_L */
+GPIO_INT(PCH_SLP_S3_L, PIN(A, 6), GPIO_INT_BOTH, power_signal_interrupt) /* SLP_S3_L */
+GPIO_INT(SUSPWRDNACK, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) /* SUSPWRDNACK */
+GPIO_INT(RSMRST_L_PGOOD, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt) /* PMIC_EC_RSMRST_ODL */
+GPIO_INT(ALL_SYS_PGOOD, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) /* PMIC_EC_PWROK_OD */
+
+/* Other interrupts */
+GPIO_INT(WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) /* EC_WP_ODL */
+GPIO_INT(TABLET_MODE_L, PIN(8, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr)
+
+GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt)
+GPIO(LID_ACCEL_INT_L, PIN(5, 0), GPIO_INPUT | GPIO_SEL_1P8V)
+
+/* Define PCH_SLP_S0_L after all interrupts if CONFIG_POWER_S0IX not defined. */
+#ifndef CONFIG_POWER_S0IX
+GPIO(PCH_SLP_S0_L, PIN(A, 4), GPIO_INPUT) /* SLP_S0_L */
+#endif
+
+/*
+ * PLT_RST_L isn't used since there is a Virtual Wire on eSPI for it. It is here
+ * only for debugging purposes.
+ */
+GPIO(PLT_RST_L, PIN(C, 7), GPIO_INPUT) /* Platform Reset from SoC */
+GPIO(SYS_RESET_L, PIN(3, 4), GPIO_ODR_HIGH) /* SYS_RST_ODL */
+GPIO(PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW) /* EC_PCH_RTCRST */
+
+GPIO(ENTERING_RW, PIN(E, 1), GPIO_OUT_LOW) /* EC_ENTERING_RW */
+GPIO(PCH_WAKE_L, PIN(7, 4), GPIO_ODR_HIGH) /* EC_PCH_WAKE_ODL */
+GPIO(PCH_PWRBTN_L, PIN(C, 1), GPIO_ODR_HIGH) /* EC_PCH_PWR_BTN_ODL */
+
+GPIO(EN_PP5000, PIN(7, 3), GPIO_OUT_LOW) /* EN_PP5000_A */
+GPIO(PP5000_PG, PIN(C, 0), GPIO_INPUT) /* PP5000_PG_OD */
+GPIO(EN_PP3300, PIN(D, 4), GPIO_OUT_LOW) /* EN_PP3300_A */
+GPIO(PP3300_PG, PIN(6, 0), GPIO_INPUT) /* PP3300_PG_OD */
+GPIO(PMIC_EN, PIN(7, 2), GPIO_OUT_LOW) /* Enable A Rails via PMIC */
+GPIO(PCH_RSMRST_L, PIN(C, 2), GPIO_OUT_LOW) /* RSMRST# to SOC. All _A rails now up. */
+GPIO(PCH_SYS_PWROK, PIN(B, 7), GPIO_OUT_LOW) /* EC_PCH_PWROK. All S0 rails now up. */
+
+/* Peripheral rails */
+GPIO(ENABLE_BACKLIGHT, PIN(D, 3), GPIO_ODR_HIGH |
+ GPIO_SEL_1P8V) /* EC_BL_EN_OD */
+GPIO(EN_P3300_TRACKPAD_ODL, PIN(3, 3), GPIO_ODR_HIGH)
+
+GPIO(EC_BATT_PRES_L, PIN(E, 5), GPIO_INPUT)
+
+/*
+ * EC_RST_ODL acts as a wake source from PSL hibernate mode. However, it does
+ * not need to be an interrupt for normal EC operations. Thus, configure it as
+ * GPIO_INPUT with wake on low-to-high edge using GPIO_HIB_WAKE_HIGH so that PSL
+ * common code can configure PSL_IN correctly.
+ *
+ * Reason for choosing low-to-high edge for waking from hibernate is to avoid
+ * the double reset - one because of PSL_IN wake and other because of VCC1_RST
+ * being asserted. Also, it should be fine to have the EC in hibernate when H1
+ * or servo wants to hold the EC in reset since VCC1 will be down and so entire
+ * EC logic (except PSL) as well as AP will be in reset.
+ *
+ * We need to lock the setting so this gpio can't be reconfigured to overdrive
+ * the real reset signal. (This is the PSL input pin not the real reset pin).
+ */
+GPIO(EC_RST_ODL, PIN(0, 2), GPIO_INT_BOTH |
+ GPIO_HIB_WAKE_HIGH |
+ GPIO_LOCKED)
+
+/*
+ * PCH_PROCHOT_ODL is primarily for monitoring the PROCHOT# signal which is
+ * normally driven by the PMIC. The EC can also drive this signal in the event
+ * that the ambient or charger temperature sensors exceeds their thresholds.
+ */
+GPIO(CPU_PROCHOT, PIN(3, 7), GPIO_INPUT | GPIO_SEL_1P8V) /* PCH_PROCHOT_ODL */
+
+/* I2C pins - Alternate function below configures I2C module on these pins */
+GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT) /* EC_I2C_BATTERY_3V3_SCL */
+GPIO(I2C0_SDA, PIN(B, 4), GPIO_INPUT) /* EC_I2C_BATTERY_3V3_SDA */
+GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_USB_C0_MUX_SCL */
+GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_USB_C0_MUX_SDA */
+GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C_USB_C1_MUX_SCL */
+GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C_USB_C1_MUX_SDA */
+GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT) /* EC_I2C_EEPROM_SCL */
+GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT) /* EC_I2C_EEPROM_SDA */
+GPIO(I2C4_SCL, PIN(F, 3), GPIO_INPUT) /* EC_I2C_CHARGER_3V3_SCL */
+GPIO(I2C4_SDA, PIN(F, 2), GPIO_INPUT) /* EC_I2C_CHARGER_3V3_SDA */
+GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT |
+ GPIO_SEL_1P8V) /* EC_I2C_SENSOR_U_SCL */
+GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT |
+ GPIO_SEL_1P8V) /* EC_I2C_SENSOR_U_SDA */
+
+/* USB pins */
+GPIO(EN_USB_A0_5V, PIN(6, 7), GPIO_OUT_LOW) /* Enable A0 5V Charging */
+GPIO(EN_USB_A1_5V, PIN(9, 6), GPIO_OUT_LOW) /* Enable A1 5V Charging */
+GPIO(USB_A0_CHARGE_EN_L, PIN(A, 2), GPIO_OUT_HIGH) /* Enable A0 1.5A Charging */
+GPIO(USB_A1_CHARGE_EN_L, PIN(A, 0), GPIO_OUT_HIGH) /* Enable A1 1.5A Charging */
+GPIO(USB_C0_PD_RST, PIN(8, 3), GPIO_OUT_LOW) /* C0 PD Reset */
+GPIO(USB_C0_BC12_VBUS_ON, PIN(6, 3), GPIO_OUT_LOW) /* C0 BC1.2 Power */
+GPIO(USB_C0_BC12_CHG_DET_L, PIN(9, 5), GPIO_INPUT) /* C0 BC1.2 Detect */
+GPIO(USB_C0_HPD_1V8_ODL, PIN(C, 5), GPIO_INPUT | /* C0 DP Hotplug Detect */
+ GPIO_SEL_1P8V)
+GPIO(USB_C1_PD_RST_ODL, PIN(7, 0), GPIO_ODR_HIGH) /* C1 PD Reset */
+GPIO(USB_C1_BC12_VBUS_ON, PIN(B, 1), GPIO_OUT_LOW) /* C1 BC1.2 Power */
+GPIO(USB_C1_BC12_CHG_DET_L, PIN(E, 4), GPIO_INPUT) /* C1 BC1.2 Detect */
+GPIO(USB_C1_HPD_1V8_ODL, PIN(C, 6), GPIO_INPUT | /* C1 DP Hotplug Detect */
+ GPIO_SEL_1P8V)
+
+/* LED */
+GPIO(BAT_LED_RED_L, PIN(C, 3), GPIO_OUT_HIGH) /* LED_1_L */
+GPIO(BAT_LED_GREEN_L, PIN(C, 4), GPIO_OUT_HIGH) /* LED_2_L */
+GPIO(PWR_LED_WHITE_L, PIN(D, 7), GPIO_OUT_HIGH) /* LED_3_L */
+
+/* Not implemented in hardware */
+UNIMPLEMENTED(KB_BL_PWR_EN)
+
+/* Overcurrent event to host */
+GPIO(USB_C_OC, PIN(3, 6), GPIO_ODR_HIGH | GPIO_SEL_1P8V)
+
+/* Strap pins */
+GPIO(GPO66_NC, PIN(6, 6), GPIO_INPUT | GPIO_PULL_UP)
+GPIO(GPOB6_NC, PIN(B, 6), GPIO_INPUT | GPIO_PULL_UP)
+
+/* Camera */
+GPIO(EC_GPIO_03, PIN(0, 3), GPIO_INPUT) /* TP only */
+
+/* MKBP event synchronization */
+GPIO(EC_INT_L, PIN(9, 4), GPIO_ODR_HIGH) /* EC_AP_INT_ODL */
+
+/* Misc. */
+GPIO(CCD_MODE_EC_L, PIN(E, 3), GPIO_INPUT)
+GPIO(TRACKPAD_INT_1V8_ODL, PIN(9, 3), GPIO_INPUT | GPIO_SEL_1P8V)
+
+/* Unused pins */
+GPIO(CHARGER_PMON, PIN(4, 2), GPIO_INPUT)
+GPIO(CHARGER_IADP, PIN(4, 3), GPIO_INPUT)
+GPIO(EC_GPIO57, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) /* TP Only */
+GPIO(EC_GPIO97, PIN(9, 7), GPIO_INPUT | GPIO_PULL_UP) /* TP Only */
+GPIO(EC_I2S_SFRM, PIN(A, 5), GPIO_INPUT | GPIO_SEL_1P8V)
+GPIO(EC_I2S_SCLK, PIN(A, 7), GPIO_INPUT | GPIO_SEL_1P8V)
+GPIO(EC_I2S_TX_PCH_RX, PIN(B, 0), GPIO_INPUT | GPIO_SEL_1P8V)
+
+/* Keyboard pins */
+ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_00-01 */
+ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) /* KSI_02-07 */
+ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */
+ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */
+ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */
+ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */
+GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */
+
+/* Alternate functions GPIO definitions */
+/* Cr50 requires no pull-ups on UART pins. */
+ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */
+ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, 0) /* I2C0 */
+ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */
+ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */
+ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3 */
+ALTERNATE(PIN_MASK(F, 0x0C), 0, MODULE_I2C, 0) /* I2C4 */
+ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, GPIO_SEL_1P8V) /* I2C7 - 1.8V */
+ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */
+ALTERNATE(PIN_MASK(4, 0x02), 0, MODULE_ADC, 0) /* ADC4 */
+ALTERNATE(PIN_MASK(F, 0x01), 0, MODULE_ADC, 0) /* ADC9 */
+ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* PWM3: KB_BL_PWM */
+
+/* Power Switch Logic (PSL) inputs */
+ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0) /* GPIOD2 = LID_OPEN */
+ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0) /* GPIO00 = ACOK_OD,
+ GPIO01 = MECH_PWR_BTN_ODL
+ GPIO02 = EC_RST_ODL */
diff --git a/board/lick/led.c b/board/lick/led.c
new file mode 100644
index 0000000000..3985c519f3
--- /dev/null
+++ b/board/lick/led.c
@@ -0,0 +1,112 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Power and battery LED control for Lick
+ */
+
+#include "ec_commands.h"
+#include "gpio.h"
+#include "led_common.h"
+#include "led_onoff_states.h"
+#include "chipset.h"
+
+#define LED_ON_LVL 0
+#define LED_OFF_LVL 1
+
+const int led_charge_lvl_1 = 5;
+
+const int led_charge_lvl_2 = 97;
+
+struct led_descriptor led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = {
+ [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_RED, LED_INDEFINITE} },
+ [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} },
+ [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} },
+ [STATE_DISCHARGE_S0] = {{LED_OFF, LED_INDEFINITE} },
+ [STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} },
+ [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} },
+ [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC},
+ {LED_OFF, 1 * LED_ONE_SEC} },
+ [STATE_FACTORY_TEST] = {{EC_LED_COLOR_RED, 2 * LED_ONE_SEC},
+ {EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} },
+};
+
+const struct led_descriptor
+ led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = {
+ [PWR_LED_STATE_ON] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} },
+ [PWR_LED_STATE_SUSPEND_AC] = {{EC_LED_COLOR_WHITE, 3 * LED_ONE_SEC},
+ {LED_OFF, 0.5 * LED_ONE_SEC} },
+ [PWR_LED_STATE_SUSPEND_NO_AC] = {{LED_OFF, LED_INDEFINITE} },
+ [PWR_LED_STATE_OFF] = {{LED_OFF, LED_INDEFINITE} },
+};
+
+const enum ec_led_id supported_led_ids[] = {
+ EC_LED_ID_POWER_LED,
+ EC_LED_ID_BATTERY_LED
+};
+
+const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
+
+void led_set_color_power(enum ec_led_colors color)
+{
+ if (color == EC_LED_COLOR_WHITE)
+ gpio_set_level(GPIO_PWR_LED_WHITE_L, LED_ON_LVL);
+ else
+ /* LED_OFF and unsupported colors */
+ gpio_set_level(GPIO_PWR_LED_WHITE_L, LED_OFF_LVL);
+}
+
+void led_set_color_battery(enum ec_led_colors color)
+{
+ switch (color) {
+ case EC_LED_COLOR_RED:
+ gpio_set_level(GPIO_BAT_LED_RED_L, LED_ON_LVL);
+ gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL);
+ break;
+ case EC_LED_COLOR_AMBER:
+ gpio_set_level(GPIO_BAT_LED_RED_L, LED_ON_LVL);
+ gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_ON_LVL);
+ break;
+ case EC_LED_COLOR_GREEN:
+ gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL);
+ gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_ON_LVL);
+ break;
+ default: /* LED_OFF and other unsupported colors */
+ gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL);
+ gpio_set_level(GPIO_BAT_LED_GREEN_L, LED_OFF_LVL);
+ break;
+ }
+}
+
+void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
+{
+ if (led_id == EC_LED_ID_BATTERY_LED) {
+ brightness_range[EC_LED_COLOR_RED] = 1;
+ brightness_range[EC_LED_COLOR_AMBER] = 1;
+ brightness_range[EC_LED_COLOR_GREEN] = 1;
+ } else if (led_id == EC_LED_ID_POWER_LED) {
+ brightness_range[EC_LED_COLOR_WHITE] = 1;
+ }
+}
+
+int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
+{
+ if (led_id == EC_LED_ID_BATTERY_LED) {
+ if (brightness[EC_LED_COLOR_RED] != 0)
+ led_set_color_battery(EC_LED_COLOR_RED);
+ else if (brightness[EC_LED_COLOR_AMBER] != 0)
+ led_set_color_battery(EC_LED_COLOR_AMBER);
+ else if (brightness[EC_LED_COLOR_GREEN] != 0)
+ led_set_color_battery(EC_LED_COLOR_GREEN);
+ else
+ led_set_color_battery(LED_OFF);
+ } else if (led_id == EC_LED_ID_POWER_LED) {
+ if (brightness[EC_LED_COLOR_WHITE] != 0)
+ led_set_color_power(EC_LED_COLOR_WHITE);
+ else
+ led_set_color_power(LED_OFF);
+ }
+
+ return EC_SUCCESS;
+}
+