zephyr: rename projects folder to program

Renme the projects folder to program for consistency with the name
scheme used by the boxster configuration.

BUG=b:254097139
BRANCH=none
TEST=zmake compare-builds -a
TEST=twister

Signed-off-by: Keith Short <keithshort@chromium.org>
Change-Id: Ib56a57f1e5942e6dd0460e3be81722896eed72af
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3968444
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>
Commit-Queue: Jeremy Bettis <jbettis@chromium.org>

1 files changed, 180 insertions, 0 deletions

diff --git a/zephyr/program/rex/prj.conf b/zephyr/program/rex/prj.conf
new file mode 100644
index 0000000000..7dcb2894da
--- /dev/null
+++ b/zephyr/program/rex/prj.conf
@@ -0,0 +1,180 @@
+# Copyright 2022 The ChromiumOS Authors
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+
+CONFIG_PLATFORM_EC=y
+CONFIG_CROS_EC=y
+CONFIG_SHIMMED_TASKS=y
+CONFIG_SYSCON=y
+# Enable during development
+CONFIG_LTO=n
+CONFIG_PLATFORM_EC_SYSTEM_UNLOCKED=y
+CONFIG_PLATFORM_EC_BOARD_RESET_AFTER_POWER_ON=y
+
+# Shell Commands
+CONFIG_SHELL_HELP=y
+CONFIG_SHELL_HISTORY=y
+CONFIG_SHELL_TAB=y
+CONFIG_SHELL_TAB_AUTOCOMPLETION=y
+CONFIG_KERNEL_SHELL=y
+
+# Logging
+CONFIG_LOG=y
+CONFIG_LOG_MODE_MINIMAL=y
+
+# Disable default features we don't want in a minimal example.
+CONFIG_PLATFORM_EC_BACKLIGHT_LID=y
+CONFIG_PLATFORM_EC_SWITCH=y
+CONFIG_PLATFORM_EC_VBOOT_EFS2=y
+
+# Application processor; communicates with EC via eSPI
+CONFIG_AP=y
+CONFIG_ESPI=y
+CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S3=y
+CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y
+CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y
+CONFIG_PLATFORM_EC_HOSTCMD=y
+# Disabling this until temp sensor support is in
+CONFIG_PLATFORM_EC_THROTTLE_AP=n
+CONFIG_PLATFORM_EC_PORT80=y
+
+# Power Sequecing
+CONFIG_AP_X86_INTEL_MTL=y
+CONFIG_X86_NON_DSX_PWRSEQ_MTL=y
+CONFIG_X86_NON_DSX_PWRSEQ_HOST_CMD=y
+# TODO (b/240434243): This may be needed, but using eSPI VW for now
+CONFIG_PLATFORM_EC_POWERSEQ_SLP_S3_L_OVERRIDE=n
+CONFIG_PLATFORM_EC_POWERSEQ_PP5000_CONTROL=n
+
+# Zephyr Inbuilt AP Power Sequencing Config
+CONFIG_AP_PWRSEQ=y
+CONFIG_X86_NON_DSX_PWRSEQ_CONSOLE=y
+CONFIG_AP_PWRSEQ_S0IX=y
+
+# ADC
+CONFIG_ADC=y
+
+# I2C
+CONFIG_I2C=y
+CONFIG_PLATFORM_EC_HOSTCMD_I2C_CONTROL=y
+
+# PWM
+CONFIG_PWM=y
+
+# Fan
+CONFIG_TACH_NPCX=y
+
+# Temperature sensors
+CONFIG_SENSOR=y
+CONFIG_PLATFORM_EC_TEMP_SENSOR=y
+CONFIG_PLATFORM_EC_THERMISTOR=y
+CONFIG_PLATFORM_EC_TEMP_SENSOR_POWER=y
+
+# CBI EEPROM support
+CONFIG_EEPROM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_SHELL=n
+CONFIG_PLATFORM_EC_CBI_EEPROM=y
+CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=y
+CONFIG_PLATFORM_EC_BYPASS_CBI_EEPROM_WP_CHECK=y
+
+# LED
+CONFIG_PLATFORM_EC_LED_DT=y
+
+# Battery
+CONFIG_PLATFORM_EC_BATTERY=y
+CONFIG_PLATFORM_EC_BATTERY_SMART=y
+CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y
+CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y
+CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y
+CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y
+
+# Charger
+CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y
+CONFIG_PLATFORM_EC_CHARGER_INPUT_CURRENT=512
+CONFIG_PLATFORM_EC_CHARGER_ISL9241=y
+CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=5
+CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10
+CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=30000
+CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT=15000
+
+# USB-A
+CONFIG_PLATFORM_EC_USBA=y
+
+# USBC
+CONFIG_PLATFORM_EC_USBC_PPC=y
+CONFIG_PLATFORM_EC_USBC_PPC_NX20P3483=y
+CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y
+CONFIG_PLATFORM_EC_USBC_PPC_SYV682C=y
+CONFIG_PLATFORM_EC_USBC_PPC_SYV682X_SMART_DISCHARGE=y
+CONFIG_PLATFORM_EC_USBC_RETIMER_INTEL_HB=y
+CONFIG_PLATFORM_EC_USBC_VCONN=y
+
+CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y
+CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y
+CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y
+CONFIG_PLATFORM_EC_USB_PD_FRS=y
+CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y
+CONFIG_PLATFORM_EC_USB_PD_REV30=y
+CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y
+CONFIG_PLATFORM_EC_USB_PD_TCPM_TCPCI=y
+CONFIG_PLATFORM_EC_USB_PD_TCPM_NCT38XX=y
+CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8815=y
+CONFIG_PLATFORM_EC_USB_PD_TRY_SRC=y
+CONFIG_PLATFORM_EC_USB_PD_DUAL_ROLE_AUTO_TOGGLE=y
+CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=y
+CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=y
+CONFIG_PLATFORM_EC_USB_PD_USB4=y
+CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y
+CONFIG_PLATFORM_EC_USB_PID=0x504D
+
+# IOEX
+CONFIG_GPIO_NCT38XX=y
+
+# BC 1.2
+CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y
+
+#USB Mux
+CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y
+CONFIG_PLATFORM_EC_USB_MUX_TASK=y
+
+# External power
+CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y
+
+# Standard shimmed features
+CONFIG_PLATFORM_EC_POWER_BUTTON=y
+CONFIG_PLATFORM_EC_LID_SWITCH=y
+
+# Keyboard support
+CONFIG_PLATFORM_EC_KEYBOARD=y
+CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_8042=y
+# Column 2 is driven through the GSC, which inverts the signal going through it
+CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y
+
+# MKBP event
+CONFIG_PLATFORM_EC_MKBP_EVENT=y
+CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y
+CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y
+
+# Sensors console command
+CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y
+CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y
+CONFIG_PLATFORM_EC_CONSOLE_CMD_I2C_SPEED=y
+
+# Sensors
+CONFIG_SENSOR=y
+CONFIG_SENSOR_SHELL=n
+CONFIG_PLATFORM_EC_MOTIONSENSE=y
+CONFIG_PLATFORM_EC_ACCEL_FIFO=y
+CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y
+CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y
+CONFIG_PLATFORM_EC_LID_ANGLE=y
+CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y
+CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y
+CONFIG_PLATFORM_EC_TABLET_MODE=y
+CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y
+
+# Sensor Drivers
+CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y
+CONFIG_PLATFORM_EC_ACCEL_LIS2DW12=y
+CONFIG_PLATFORM_EC_ALS_TCS3400=y