Swap system_jumped_to_this_image with system_jumped_latestabilize-quickfix-13310.91.B-masterstabilize-quickfix-13310.76.B-masterstabilize-quickfix-13310.73.B-masterstabilize-13310.99.B-masterstabilize-13310.94.B-masterstabilize-13310.83.B-masterstabilize-13310.74.B-masterstabilize-13310.72.B-masterrelease-R85-13310.B-master

EFS2 boards need to call system_jumped_late in HOOK_INIT to avoid
running init code twice per boot.

system_jumped_to_this_image and system_jumped_late are functionally
equivalent for non EFS2 boards.

This patch will prevent system_jumped_to_this_image from being used
for EFS2 boards when code is copied from a past project.

BUG=chromium:1072743
BRANCH=none
TEST=buildall

Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I73fb5cedc5325d1c80825f9346954013046ee1df
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2267685
Reviewed-by: Keith Short <keithshort@chromium.org>

29 files changed, 38 insertions, 38 deletions

diff --git a/board/atlas/board.c b/board/atlas/board.c
index 8948207c24..64bd8f1171 100644
--- a/board/atlas/board.c
+++ b/board/atlas/board.c
@@ -212,7 +212,7 @@ void board_reset_pd_mcu(void)
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
@@ -394,7 +394,7 @@ static void board_pmic_init(void)
 	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
 		   BD99992GW_REG_PBCONFIG, 0x00);
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* DISCHGCNT1 - enable 100 ohm discharge on VCCIO */
diff --git a/board/bobba/board.c b/board/bobba/board.c
index ed869faefd..7f20c820fd 100644
--- a/board/bobba/board.c
+++ b/board/bobba/board.c
@@ -335,7 +335,7 @@ static void board_usb_charge_mode_init(void)
 	 * Only overriding the USB_DISALLOW_SUSPEND_CHARGE in RO is enough because
 	 * USB_SYSJUMP_TAG preserves the settings to RW. And we should honor to it.
 	 */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* Currently only blorb and droid support this feature. */
diff --git a/board/chell/board.c b/board/chell/board.c
index 1315235f8d..1f8390fdd9 100644
--- a/board/chell/board.c
+++ b/board/chell/board.c
@@ -232,7 +232,7 @@ static void board_pmic_init(void)
 	 * No need to re-init below settings since they are present on all MP
 	 * ROs and PMIC settings are sticky across sysjump
 	 */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* Set CSDECAYEN / VCCIO decays to 0V at assertion of SLP_S0# */
@@ -412,7 +412,7 @@ static void board_handle_reboot(void)
 {
 	int flags;
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* Interrogate current reset flags from previous reboot. */
diff --git a/board/cheza/board.c b/board/cheza/board.c
index e4abd22d2f..ed9282523f 100644
--- a/board/cheza/board.c
+++ b/board/cheza/board.c
@@ -409,7 +409,7 @@ DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image()) {
+	if (!system_jumped_late()) {
 		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
 		board_reset_pd_mcu();
 	}
diff --git a/board/coral/board.c b/board/coral/board.c
index 5fcb40d603..ccb686451e 100644
--- a/board/coral/board.c
+++ b/board/coral/board.c
@@ -372,7 +372,7 @@ static void board_tcpc_init(void)
 	}
 
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/*
diff --git a/board/eve/board.c b/board/eve/board.c
index c703619e71..d8329d27ea 100644
--- a/board/eve/board.c
+++ b/board/eve/board.c
@@ -302,7 +302,7 @@ void board_reset_pd_mcu(void)
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/* Enable TCPC interrupts */
@@ -405,7 +405,7 @@ static void board_pmic_init(void)
 {
 	board_report_pmic_fault("SYSJUMP");
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* DISCHGCNT2 - enable 100 ohm discharge on V3.3A and V1.8A */
diff --git a/board/glados/board.c b/board/glados/board.c
index 43cfad06cf..a72b43d765 100644
--- a/board/glados/board.c
+++ b/board/glados/board.c
@@ -213,7 +213,7 @@ BUILD_ASSERT(ARRAY_SIZE(als) == ALS_COUNT);
 static void board_pmic_init(void)
 {
 	/* No need to re-init PMIC since settings are sticky across sysjump */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* Set CSDECAYEN / VCCIO decays to 0V at assertion of SLP_S0# */
@@ -410,7 +410,7 @@ static void board_handle_reboot(void)
 {
 	int flags;
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	if (system_get_board_version() < BOARD_MIN_ID_LOD_EN)
diff --git a/board/glados_pd/board.c b/board/glados_pd/board.c
index b0c4ddbff9..13fa2a16ef 100644
--- a/board/glados_pd/board.c
+++ b/board/glados_pd/board.c
@@ -57,7 +57,7 @@ static void board_init(void)
 	gpio_enable_interrupt(GPIO_USB_C1_VBUS_WAKE_L);
 
 	/* Set PD MCU system status bits */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		pd_status_flags |= PD_STATUS_JUMPED_TO_IMAGE;
 	if (system_is_in_rw())
 		pd_status_flags |= PD_STATUS_IN_RW;
diff --git a/board/glkrvp/board.c b/board/glkrvp/board.c
index fc54697fb4..6c3a734f89 100644
--- a/board/glkrvp/board.c
+++ b/board/glkrvp/board.c
@@ -166,7 +166,7 @@ int board_get_version(void)
 static void pmic_init(void)
 {
 	/* No need to re-init PMIC since settings are sticky across sysjump. */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/*
diff --git a/board/glkrvp/chg_usb_pd.c b/board/glkrvp/chg_usb_pd.c
index ff6aefbf97..f8e8520b72 100644
--- a/board/glkrvp/chg_usb_pd.c
+++ b/board/glkrvp/chg_usb_pd.c
@@ -123,7 +123,7 @@ void tcpc_alert_event(enum gpio_signal signal)
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/* Enable TCPC0/1 interrupt */
diff --git a/board/glkrvp_ite/board.c b/board/glkrvp_ite/board.c
index cb2da54a0d..e86d1083b7 100644
--- a/board/glkrvp_ite/board.c
+++ b/board/glkrvp_ite/board.c
@@ -171,7 +171,7 @@ int board_get_version(void)
 static void pmic_init(void)
 {
 	/* No need to re-init PMIC since settings are sticky across sysjump. */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/*
diff --git a/board/glkrvp_ite/chg_usb_pd.c b/board/glkrvp_ite/chg_usb_pd.c
index 2e8d237e64..7bc60fd5c8 100644
--- a/board/glkrvp_ite/chg_usb_pd.c
+++ b/board/glkrvp_ite/chg_usb_pd.c
@@ -117,7 +117,7 @@ void tcpc_alert_event(enum gpio_signal signal)
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/* Enable TCPC0/1 interrupt */
diff --git a/board/hatch/board.c b/board/hatch/board.c
index 704014d65f..a5715d2cfa 100644
--- a/board/hatch/board.c
+++ b/board/hatch/board.c
@@ -442,7 +442,7 @@ static void reset_gpio_flags(enum gpio_signal signal, int flags)
 	 * may change the value from the previous image which could cause a
 	 * brownout.
 	 */
-	if (system_is_reboot_warm() || system_jumped_to_this_image())
+	if (system_is_reboot_warm() || system_jumped_late())
 		flags &= ~(GPIO_LOW | GPIO_HIGH);
 
 	gpio_set_flags(signal, flags);
diff --git a/board/kindred/board.c b/board/kindred/board.c
index c573822851..c3c802136b 100644
--- a/board/kindred/board.c
+++ b/board/kindred/board.c
@@ -384,7 +384,7 @@ static void reset_gpio_flags(enum gpio_signal signal, int flags)
 	 * may change the value from the previous image which could cause a
 	 * brownout.
 	 */
-	if (system_is_reboot_warm() || system_jumped_to_this_image())
+	if (system_is_reboot_warm() || system_jumped_late())
 		flags &= ~(GPIO_LOW | GPIO_HIGH);
 
 	gpio_set_flags(signal, flags);
diff --git a/board/lazor/board.c b/board/lazor/board.c
index 1df3ab4b6b..fcec96169e 100644
--- a/board/lazor/board.c
+++ b/board/lazor/board.c
@@ -242,7 +242,7 @@ DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image()) {
+	if (!system_jumped_late()) {
 		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
 		board_reset_pd_mcu();
 	}
diff --git a/board/mchpevb1/board.c b/board/mchpevb1/board.c
index c8dc130821..79f104ff55 100644
--- a/board/mchpevb1/board.c
+++ b/board/mchpevb1/board.c
@@ -485,7 +485,7 @@ static void board_pmic_init(void)
 	int rv, cfg;
 
 	/* No need to re-init PMIC since settings are sticky across sysjump */
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 #if 0 /* BD99992GW PMIC on a real Chromebook */
@@ -562,7 +562,7 @@ static void board_init(void)
 	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
 
 #ifdef HAS_TASK_MOTIONSENSE
-	if (system_jumped_to_this_image() &&
+	if (system_jumped_late() &&
 	    chipset_in_state(CHIPSET_STATE_ON)) {
 		trace0(0, BRD, 0, "board_init: S0 call board_spi_enable");
 		board_spi_enable();
@@ -781,7 +781,7 @@ static void board_handle_reboot(void)
 	CPRINTS("MEC HOOK_INIT - called board_handle_reboot");
 	trace0(0, HOOK, 0, "HOOK_INIT - board_handle_reboot");
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	if (system_get_board_version() < BOARD_MIN_ID_LOD_EN)
diff --git a/board/mushu/board.c b/board/mushu/board.c
index 5c3aabe2ec..c4186e4be5 100644
--- a/board/mushu/board.c
+++ b/board/mushu/board.c
@@ -504,7 +504,7 @@ static void reset_gpio_flags(enum gpio_signal signal, int flags)
 	 * may change the value from the previous image which could cause a
 	 * brownout.
 	 */
-	if (system_is_reboot_warm() || system_jumped_to_this_image())
+	if (system_is_reboot_warm() || system_jumped_late())
 		flags &= ~(GPIO_LOW | GPIO_HIGH);
 
 	gpio_set_flags(signal, flags);
diff --git a/board/nami/board.c b/board/nami/board.c
index b3aa7f91cd..5e3f75fbd3 100644
--- a/board/nami/board.c
+++ b/board/nami/board.c
@@ -317,7 +317,7 @@ void board_reset_pd_mcu(void)
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/* Enable TCPC interrupts */
diff --git a/board/nautilus/board.c b/board/nautilus/board.c
index 30fc388e57..9b191cbd70 100644
--- a/board/nautilus/board.c
+++ b/board/nautilus/board.c
@@ -219,7 +219,7 @@ void board_reset_pd_mcu(void)
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image()) {
+	if (!system_jumped_late()) {
 		board_reset_pd_mcu();
 	}
 
@@ -399,7 +399,7 @@ static void board_pmic_init(void)
 {
 	board_report_pmic_fault("SYSJUMP");
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */
diff --git a/board/poppy/base_detect_poppy.c b/board/poppy/base_detect_poppy.c
index dc4341d51a..358461896e 100644
--- a/board/poppy/base_detect_poppy.c
+++ b/board/poppy/base_detect_poppy.c
@@ -241,7 +241,7 @@ static void base_init(void)
 	 * If we jumped to this image and chipset is already in S0, enable
 	 * base.
 	 */
-	if (system_jumped_to_this_image() && chipset_in_state(CHIPSET_STATE_ON))
+	if (system_jumped_late() && chipset_in_state(CHIPSET_STATE_ON))
 		base_enable();
 }
 DECLARE_HOOK(HOOK_INIT, base_init, HOOK_PRIO_DEFAULT+1);
diff --git a/board/poppy/board.c b/board/poppy/board.c
index ddd0721591..dccf04a3cd 100644
--- a/board/poppy/board.c
+++ b/board/poppy/board.c
@@ -289,7 +289,7 @@ void board_tcpc_init(void)
 	int reg;
 
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image()) {
+	if (!system_jumped_late()) {
 		gpio_set_level(GPIO_PP3300_USB_PD, 1);
 		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
 		msleep(10);
@@ -492,7 +492,7 @@ static void board_pmic_init(void)
 {
 	board_report_pmic_fault("SYSJUMP");
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */
diff --git a/board/rainier/board.c b/board/rainier/board.c
index 88f334c827..fa852a5a90 100644
--- a/board/rainier/board.c
+++ b/board/rainier/board.c
@@ -236,7 +236,7 @@ static void board_init(void)
 	STM32_GPIO_OSPEEDR(GPIO_D) |= 0x000003cf;
 
 	/* Sensor Init */
-	if (system_jumped_to_this_image() && chipset_in_state(CHIPSET_STATE_ON))
+	if (system_jumped_late() && chipset_in_state(CHIPSET_STATE_ON))
 		board_spi_enable();
 }
 DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
diff --git a/board/rammus/board.c b/board/rammus/board.c
index ea6751032a..b46aece2a9 100644
--- a/board/rammus/board.c
+++ b/board/rammus/board.c
@@ -247,7 +247,7 @@ void board_tcpc_init(void)
 	ps8751_i2c_remap();
 
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image()) {
+	if (!system_jumped_late()) {
 		board_reset_pd_mcu();
 	}
 
@@ -413,7 +413,7 @@ static void board_pmic_init(void)
 {
 	board_report_pmic_fault("SYSJUMP");
 
-	if (system_jumped_to_this_image())
+	if (system_jumped_late())
 		return;
 
 	/*
diff --git a/board/reef/board.c b/board/reef/board.c
index 29b6ca0bdc..72decd3c40 100644
--- a/board/reef/board.c
+++ b/board/reef/board.c
@@ -366,7 +366,7 @@ void board_tcpc_init(void)
 	int reg;
 
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/*
diff --git a/board/reef_mchp/board.c b/board/reef_mchp/board.c
index 3540cf334c..373668b195 100644
--- a/board/reef_mchp/board.c
+++ b/board/reef_mchp/board.c
@@ -506,7 +506,7 @@ void board_tcpc_init(void)
 	int reg;
 
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image())
+	if (!system_jumped_late())
 		board_reset_pd_mcu();
 
 	/*
diff --git a/board/scarlet/board.c b/board/scarlet/board.c
index cb70a7c163..ca4c7eb13d 100644
--- a/board/scarlet/board.c
+++ b/board/scarlet/board.c
@@ -282,7 +282,7 @@ static void board_init(void)
 	STM32_GPIO_OSPEEDR(GPIO_D) |= 0x000003cf;
 
 	/* Sensor Init */
-	if (system_jumped_to_this_image() && chipset_in_state(CHIPSET_STATE_ON))
+	if (system_jumped_late() && chipset_in_state(CHIPSET_STATE_ON))
 		board_spi_enable();
 }
 DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
diff --git a/board/stryke/board.c b/board/stryke/board.c
index a60f11699f..a6396ced52 100644
--- a/board/stryke/board.c
+++ b/board/stryke/board.c
@@ -360,7 +360,7 @@ static void reset_gpio_flags(enum gpio_signal signal, int flags)
 	 * may change the value from the previous image which could cause a
 	 * brownout.
 	 */
-	if (system_is_reboot_warm() || system_jumped_to_this_image())
+	if (system_is_reboot_warm() || system_jumped_late())
 		flags &= ~(GPIO_LOW | GPIO_HIGH);
 
 	gpio_set_flags(signal, flags);
diff --git a/board/sushi/board.c b/board/sushi/board.c
index 36d312f330..dea90102f0 100644
--- a/board/sushi/board.c
+++ b/board/sushi/board.c
@@ -442,7 +442,7 @@ static void reset_gpio_flags(enum gpio_signal signal, int flags)
 	 * may change the value from the previous image which could cause a
 	 * brownout.
 	 */
-	if (system_is_reboot_warm() || system_jumped_to_this_image())
+	if (system_is_reboot_warm() || system_jumped_late())
 		flags &= ~(GPIO_LOW | GPIO_HIGH);
 
 	gpio_set_flags(signal, flags);
diff --git a/board/trogdor/board.c b/board/trogdor/board.c
index 76b66be6f0..4ada5e7945 100644
--- a/board/trogdor/board.c
+++ b/board/trogdor/board.c
@@ -256,7 +256,7 @@ DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
 void board_tcpc_init(void)
 {
 	/* Only reset TCPC if not sysjump */
-	if (!system_jumped_to_this_image()) {
+	if (!system_jumped_late()) {
 		/* TODO(crosbug.com/p/61098): How long do we need to wait? */
 		board_reset_pd_mcu();
 	}