diff options
| author | Jack Rosenthal <jrosenth@chromium.org> | 2021-11-04 12:11:58 -0600 |
|---|---|---|
| committer | Commit Bot <commit-bot@chromium.org> | 2021-11-05 04:22:34 +0000 |
| commit | 252457d4b21f46889eebad61d4c0a65331919cec (patch) | |
| tree | 01856c4d31d710b20e85a74c8d7b5836e35c3b98 /baseboard | |
| parent | 08f5a1e6fc2c9467230444ac9b582dcf4d9f0068 (diff) | |
| download | chrome-ec-stabilize-14616.B-ish.tar.gz | |
ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish
In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.
This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.
The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.
BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
Diffstat (limited to 'baseboard')
181 files changed, 0 insertions, 25168 deletions
diff --git a/baseboard/asurada/baseboard.c b/baseboard/asurada/baseboard.c deleted file mode 100644 index c89348a562..0000000000 --- a/baseboard/asurada/baseboard.c +++ /dev/null @@ -1,101 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada baseboard-specific configuration */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charger.h" -#include "charger.h" -#include "charge_state.h" -#include "charge_state_v2.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/accel_lis2dw12.h" -#include "driver/als_tcs3400.h" -#include "driver/bc12/mt6360.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/syv682x.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/temp_sensor/thermistor.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "it5205_sbu.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power_button.h" -#include "power.h" -#include "regulator.h" -#include "spi.h" -#include "switch.h" -#include "tablet_mode.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" - -#include "gpio_list.h" - -/* Wake-up pins for hibernate */ -enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, -}; -int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* - * I2C channels (A, B, and C) are using the same timing registers (00h~07h) - * at default. - * In order to set frequency independently for each channels, - * We use timing registers 09h~0Bh, and the supported frequency will be: - * 50KHz, 100KHz, 400KHz, or 1MHz. - * I2C channels (D, E and F) can be set different frequency on different ports. - * The I2C(D/E/F) frequency depend on the frequency of SMBus Module and - * the individual prescale register. - * The frequency of SMBus module is 24MHz on default. - * The allowed range of I2C(D/E/F) frequency is as following setting. - * SMBus Module Freq = PLL_CLOCK / ((IT83XX_ECPM_SCDCR2 & 0x0F) + 1) - * (SMBus Module Freq / 510) <= I2C Freq <= (SMBus Module Freq / 8) - * Channel D has multi-function and can be used as UART interface. - * Channel F is reserved for EC debug. - */ - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"bat_chg", IT83XX_I2C_CH_A, 100, GPIO_I2C_A_SCL, GPIO_I2C_A_SDA}, - {"sensor", IT83XX_I2C_CH_B, 400, GPIO_I2C_B_SCL, GPIO_I2C_B_SDA}, - {"usb0", IT83XX_I2C_CH_C, 400, GPIO_I2C_C_SCL, GPIO_I2C_C_SDA}, - {"usb1", IT83XX_I2C_CH_E, 400, GPIO_I2C_E_SCL, GPIO_I2C_E_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY); -} - -const struct cc_para_t *board_get_cc_tuning_parameter(enum usbpd_port port) -{ - const static struct cc_para_t - cc_parameter[CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT] = { - { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }, - { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }, - }; - - return &cc_parameter[port]; -} diff --git a/baseboard/asurada/baseboard.h b/baseboard/asurada/baseboard.h deleted file mode 100644 index f3c0808660..0000000000 --- a/baseboard/asurada/baseboard.h +++ /dev/null @@ -1,196 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* IT81202-bx config */ -/* - * NOTE: we need to make correct VCC voltage selection here if EC's VCC isn't - * connect to 1.8v on other versions. - */ -#define CONFIG_IT83XX_VCC_1P8V - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON -#define CONFIG_CHIPSET_MT8192 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_HIBERNATE_WAKE_PINS_DYNAMIC -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* Chipset */ -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_CMD_POWERINDEBUG -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_S0 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_COMMON -#define CONFIG_PWM -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_WP_ACTIVE_HIGH - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_BATTERY_SMART - -/* BC12 */ -#define CONFIG_BC12_DETECT_MT6360 -#define CONFIG_BC12_DETECT_PI3USB9201 -#undef CONFIG_BC12_SINGLE_DRIVER -#define CONFIG_USB_CHARGER - -/* Charger */ -#define ADC_AMON_BMON ADC_CHARGER_AMON_R /* ADC name remap */ -#define ADC_PSYS ADC_CHARGER_PMON /* ADC name remap */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_ISL9238C -#define CONFIG_CHARGER_MAINTAIN_VBAT -#define CONFIG_CHARGER_OTG -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_PSYS_READ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* BOARD_RS2 */ -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* BOARD_RS1 */ -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON - -/* Keyboard */ -#define CONFIG_CMD_KEYBOARD -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_GPIO - -/* I2C */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_I2C_VIRTUAL_BATTERY -#define I2C_PORT_CHARGER IT83XX_I2C_CH_A -#define I2C_PORT_BATTERY IT83XX_I2C_CH_A -#define I2C_PORT_POWER IT83XX_I2C_CH_A -#define I2C_PORT_ACCEL IT83XX_I2C_CH_B -#define I2C_PORT_PPC0 IT83XX_I2C_CH_C -#define I2C_PORT_PPC1 IT83XX_I2C_CH_E -#define I2C_PORT_USB_MUX0 IT83XX_I2C_CH_C -#define I2C_PORT_USB_MUX1 IT83XX_I2C_CH_E -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define CONFIG_SMBUS_PEC - -/* LED */ -#define CONFIG_LED_COMMON - -/* PD / USB-C / PPC */ -#define CONFIG_CMD_PPC_DUMP -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_IT83XX_TUNE_CC_PHY -#define CONFIG_USB_MUX_VIRTUAL -#define CONFIG_USBC_PPC -#define CONFIG_USBC_PPC_DEDICATED_INT -#define CONFIG_USBC_PPC_POLARITY -#define CONFIG_USBC_PPC_SYV682C -#define CONFIG_USBC_PPC_VCONN -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_MUX_IT5205 /* C0 */ -#define CONFIG_USB_MUX_PS8743 /* C1 */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_DISCHARGE -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DP_HPD_GPIO -#define CONFIG_USB_PD_DP_HPD_GPIO_CUSTOM -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_FRS_PPC -#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2 -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT -#define CONFIG_USB_PID 0x5053 -#define CONFIG_USB_POWER_DELIVERY - -/* USB-A */ -#define CONFIG_USB_PORT_POWER_DUMB -#define CONFIG_USB_PORT_POWER_DUMB_CUSTOM_HOOK -#define USB_PORT_COUNT USBA_PORT_COUNT - -/* UART */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Sensor */ -#ifdef HAS_TASK_MOTIONSENSE -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CMD_ACCELS - -#define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#define CONFIG_ACCEL_INTERRUPTS -#endif - -/* SPI / Host Command */ -#define CONFIG_SPI - -/* MKBP */ -#define CONFIG_MKBP_EVENT - -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_GPIO - -/* Voltage regulator control */ -#define CONFIG_HOSTCMD_REGULATOR - -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) - -/* And the MKBP events */ -#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_KEY_MATRIX) | \ - BIT(EC_MKBP_EVENT_HOST_EVENT)) - -#include "baseboard_common.h" - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" -#include "power/mt8192.h" - -void board_reset_pd_mcu(void); -enum board_sub_board board_get_sub_board(void); -void usb_a0_interrupt(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/asurada/baseboard_common.h b/baseboard/asurada/baseboard_common.h deleted file mode 100644 index 0245ae42bf..0000000000 --- a/baseboard/asurada/baseboard_common.h +++ /dev/null @@ -1,44 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada baseboard-specific onfiguration common to ECOS and Zephyr */ - -#ifndef __CROS_EC_BASEBOARD_COMMON_H -#define __CROS_EC_BASEBOARD_COMMON_H - -/* GPIO name remapping */ -#define GPIO_EN_HDMI_PWR GPIO_EC_X_GPIO1 -#define GPIO_USB_C1_FRS_EN GPIO_EC_X_GPIO1 -#define GPIO_USB_C1_PPC_INT_ODL GPIO_X_EC_GPIO2 -#define GPIO_PS185_EC_DP_HPD GPIO_X_EC_GPIO2 -#define GPIO_USB_C1_DP_IN_HPD GPIO_EC_X_GPIO3 -#define GPIO_PS185_PWRDN_ODL GPIO_EC_X_GPIO3 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" - -enum board_sub_board { - SUB_BOARD_NONE = -1, - SUB_BOARD_TYPEC, - SUB_BOARD_HDMI, - SUB_BOARD_COUNT, -}; - -/** - * board_get_version() - Get the board version - * - * Read the ADC to obtain the board version - * - * @return board version in the range 0 to 14 inclusive - */ -int board_get_version(void); - -void ppc_interrupt(enum gpio_signal signal); -void bc12_interrupt(enum gpio_signal signal); -void x_ec_interrupt(enum gpio_signal signal); - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BASEBOARD_COMMON_H */ diff --git a/baseboard/asurada/board_chipset.c b/baseboard/asurada/board_chipset.c deleted file mode 100644 index 4d12fb0334..0000000000 --- a/baseboard/asurada/board_chipset.c +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada baseboard-chipset specific configuration */ - -#include "common.h" -#include "gpio.h" -#include "hooks.h" - -/* Called on AP S3 -> S0 transition */ -static void board_chipset_resume(void) -{ - gpio_set_level(GPIO_EC_BL_EN_OD, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S3 transition */ -static void board_chipset_suspend(void) -{ - gpio_set_level(GPIO_EC_BL_EN_OD, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); diff --git a/baseboard/asurada/board_id.c b/baseboard/asurada/board_id.c deleted file mode 100644 index a4590f3199..0000000000 --- a/baseboard/asurada/board_id.c +++ /dev/null @@ -1,107 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "common.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "timer.h" -#include "util.h" - -/** - * Conversion based on following table: - * - * ID | Rp | Rd | Voltage - * | kOhm | kOhm | mV - * ---+------+------+-------- - * 0 | 51.1 | 2.2 | 136.2 - * 1 | 51.1 | 6.81 | 388.1 - * 2 | 51.1 | 11 | 584.5 - * 3 | 57.6 | 18 | 785.7 - * 4 | 51.1 | 22 | 993.2 - * 5 | 51.1 | 30 | 1220.7 - * 6 | 51.1 | 39.2 | 1432.6 - * 7 | 56 | 56 | 1650.0 - * 8 | 47 | 61.9 | 1875.8 - * 9 | 47 | 80.6 | 2084.5 - * 10 | 56 | 124 | 2273.3 - * 11 | 51.1 | 150 | 2461.5 - * 12 | 47 | 200 | 2672.1 - * 13 | 47 | 330 | 2888.6 - * 14 | 47 | 680 | 3086.7 - */ -const static int voltage_map[] = { - 136, - 388, - 584, - 785, - 993, - 1220, - 1432, - 1650, - 1875, - 2084, - 2273, - 2461, - 2672, - 2888, - 3086, -}; - -const int threshold_mv = 100; - -/** - * Convert ADC value to board id using the voltage table above. - * - * @param ch ADC channel to read, usually ADC_BOARD_ID_0 or ADC_BOARD_ID_1. - * - * @return a non-negative board id, or negative value if error. - */ -static int adc_value_to_numeric_id(enum adc_channel ch) -{ - int mv; - - gpio_set_level(GPIO_EN_EC_ID_ODL, 0); - /* Wait to allow cap charge */ - msleep(10); - - mv = adc_read_channel(ch); - if (mv == ADC_READ_ERROR) - mv = adc_read_channel(ch); - - gpio_set_level(GPIO_EN_EC_ID_ODL, 1); - - if (mv == ADC_READ_ERROR) - return -EC_ERROR_UNKNOWN; - - for (int i = 0; i < ARRAY_SIZE(voltage_map); i++) { - if (IN_RANGE(mv, voltage_map[i] - threshold_mv, - voltage_map[i] + threshold_mv)) - return i; - } - - return -EC_ERROR_UNKNOWN; -} - -static int version = -1; - -/* b/163963220: Cache ADC value before board_hibernate_late() reads it */ -static void board_version_init(void) -{ - version = adc_value_to_numeric_id(ADC_BOARD_ID_0); - if (version < 0) { - ccprints("WARN:BOARD_ID_0"); - ccprints("Assuming board id = 0"); - - version = 0; - } -} -DECLARE_HOOK(HOOK_INIT, board_version_init, HOOK_PRIO_INIT_ADC + 1); - -__override int board_get_version(void) -{ - return version; -} diff --git a/baseboard/asurada/build.mk b/baseboard/asurada/build.mk deleted file mode 100644 index ce7b7272bd..0000000000 --- a/baseboard/asurada/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-y+=board_chipset.o -baseboard-y+=board_id.o -baseboard-y+=hibernate.o -baseboard-y+=regulator.o -baseboard-y+=usbc_config.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/baseboard/asurada/hibernate.c b/baseboard/asurada/hibernate.c deleted file mode 100644 index b26bd44adc..0000000000 --- a/baseboard/asurada/hibernate.c +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charger.h" -#include "driver/charger/isl923x_public.h" -#include "gpio.h" -#include "system.h" - -/* Hayato board specific hibernate implementation */ -__override void board_hibernate_late(void) -{ - /* - * Turn off PP5000_A. Required for devices without Z-state. - * Don't care for devices with Z-state. - */ - gpio_set_level(GPIO_EN_PP5000_A, 0); - - /* - * GPIO_EN_SLP_Z not implemented in rev0/1, - * fallback to usual hibernate process. - */ - if (board_get_version() <= 1) { - if (IS_ENABLED(BOARD_ASURADA) || - (IS_ENABLED(CONFIG_ZEPHYR) && - IS_ENABLED(CONFIG_BOARD_ASURADA))) - return; - } - - isl9238c_hibernate(CHARGER_SOLO); - - gpio_set_level(GPIO_EN_SLP_Z, 1); - - /* should not reach here */ - __builtin_unreachable(); -} diff --git a/baseboard/asurada/it5205_sbu.c b/baseboard/asurada/it5205_sbu.c deleted file mode 100644 index 9ee59a5cc3..0000000000 --- a/baseboard/asurada/it5205_sbu.c +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * IT5205 Type-C SBU OVP handler - */ - -#include "console.h" -#include "hooks.h" -#include "it5205.h" -#include "stdbool.h" -#include "timer.h" -#include "usb_mux.h" - -#define CPRINTS(format, args...) cprints(CC_USB, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USB, format, ## args) - -#define OVP_RETRY_DELAY_US_MIN (100 * MSEC) - -static unsigned int ovp_retry_delay_us = OVP_RETRY_DELAY_US_MIN; - -static void reset_retry_delay(void) -{ - CPRINTS("IT5205 SBU OVP cleared"); - ovp_retry_delay_us = OVP_RETRY_DELAY_US_MIN; -} -DECLARE_DEFERRED(reset_retry_delay); - -static void reset_csbu(void) -{ - /* double the retry time up to 1 minute */ - ovp_retry_delay_us = MIN(ovp_retry_delay_us * 2, MINUTE); - /* and reset it if interrupt not triggered in a short period */ - hook_call_deferred(&reset_retry_delay_data, 500 * MSEC); - - /* re-enable sbu interrupt */ - it5205h_enable_csbu_switch(&usb_muxes[0], false); - it5205h_enable_csbu_switch(&usb_muxes[0], true); -} -DECLARE_DEFERRED(reset_csbu); - -static void it5205h_hook_ac_change(void) -{ - int reg; - - /* Check if the board has IT5205H, and read its ovp status */ - if (i2c_read8(I2C_PORT_USB_MUX0, IT5205H_SBU_I2C_ADDR_FLAGS, - IT5205H_REG_ISR, ®)) - return; - - /* - * Re-poll ovp status immediately if AC detached, because ovp will - * likely be recovered. - * - * Always perform the re-poll even when this hook is triggered by - * unrelated events. - */ - if (reg & IT5205H_ISR_CSBU_OVP) - hook_call_deferred(&reset_csbu_data, 0); -} -DECLARE_HOOK(HOOK_AC_CHANGE, it5205h_hook_ac_change, HOOK_PRIO_DEFAULT); - -void it5205h_sbu_interrupt(enum gpio_signal signal) -{ - CPRINTS("IT5205 SBU OVP triggered"); - hook_call_deferred(&reset_csbu_data, ovp_retry_delay_us); - hook_call_deferred(&reset_retry_delay_data, -1); -} diff --git a/baseboard/asurada/it5205_sbu.h b/baseboard/asurada/it5205_sbu.h deleted file mode 100644 index 8dc59520dd..0000000000 --- a/baseboard/asurada/it5205_sbu.h +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * IT5205 Type-C SBU OVP handler - */ - -#ifndef __CROS_EC_ASURADA_IT5205_SBU_H -#define __CROS_EC_ASURADA_IT5205_SBU_H - -void it5205h_sbu_interrupt(enum gpio_signal signal); - -#endif /* __CROS_EC_ASURADA_IT5205_SBU_H */ diff --git a/baseboard/asurada/regulator.c b/baseboard/asurada/regulator.c deleted file mode 100644 index 35670bda82..0000000000 --- a/baseboard/asurada/regulator.c +++ /dev/null @@ -1,46 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "bc12/mt6360_public.h" - -/* SD Card */ -int board_regulator_get_info(uint32_t index, char *name, - uint16_t *num_voltages, uint16_t *voltages_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_get_info(id, name, num_voltages, - voltages_mv); -} - -int board_regulator_enable(uint32_t index, uint8_t enable) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_enable(id, enable); -} - -int board_regulator_is_enabled(uint32_t index, uint8_t *enabled) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_is_enabled(id, enabled); -} - -int board_regulator_set_voltage(uint32_t index, uint32_t min_mv, - uint32_t max_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_set_voltage(id, min_mv, max_mv); -} - -int board_regulator_get_voltage(uint32_t index, uint32_t *voltage_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_get_voltage(id, voltage_mv); -} diff --git a/baseboard/asurada/usb_pd_policy.c b/baseboard/asurada/usb_pd_policy.c deleted file mode 100644 index f9ba7e5a4d..0000000000 --- a/baseboard/asurada/usb_pd_policy.c +++ /dev/null @@ -1,236 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include "adc.h" -#include "atomic.h" -#include "baseboard_common.h" -#include "charge_manager.h" -#include "chipset.h" -#include "timer.h" -#include "usb_dp_alt_mode.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" - -#if CONFIG_USB_PD_3A_PORTS != 1 -#error Asurada reference must have at least one 3.0 A port -#endif - -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) - -int svdm_get_hpd_gpio(int port) -{ - /* HPD is low active, inverse the result */ - return !gpio_get_level(GPIO_EC_DPBRDG_HPD_ODL); -} - -void svdm_set_hpd_gpio(int port, int en) -{ - /* - * HPD is low active, inverse the en - * TODO: C0&C1 shares the same HPD, implement FCFS policy. - */ - gpio_set_level(GPIO_EC_DPBRDG_HPD_ODL, !en); -} - -/** - * Is the port fine to be muxed its DisplayPort lines? - * - * Only one port can be muxed to DisplayPort at a time. - * - * @param port Port number of TCPC. - * @return 1 is fine; 0 is bad as other port is already muxed; - */ -static int is_dp_muxable(int port) -{ - int i; - - for (i = 0; i < board_get_usb_pd_port_count(); i++) { - if (i != port) { - if (usb_mux_get(i) & USB_PD_MUX_DP_ENABLED) - return 0; - } - } - - return 1; -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); - int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - int cur_lvl = svdm_get_hpd_gpio(port); -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - mux_state_t mux_state; - - dp_status[port] = payload[1]; - - if (!is_dp_muxable(port)) { - /* TODO(waihong): Info user? */ - CPRINTS("p%d: The other port is already muxed.", port); - return 0; /* nak */ - } - - if (lvl) - gpio_set_level_verbose(CC_USBPD, GPIO_DP_AUX_PATH_SEL, port); - - if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && - (irq || lvl)) - /* - * Wake up the AP. IRQ or level high indicates a DP sink is now - * present. - */ - if (IS_ENABLED(CONFIG_MKBP_EVENT)) - pd_notify_dp_alt_mode_entry(port); - - /* Its initial DP status message prior to config */ - if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { - if (lvl) - dp_flags[port] |= DP_FLAGS_HPD_HI_PENDING; - return 1; - } - -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - if (irq && !lvl) { - /* - * IRQ can only be generated when the level is high, because - * the IRQ is signaled by a short low pulse from the high level. - */ - CPRINTF("ERR:HPD:IRQ&LOW\n"); - return 0; /* nak */ - } - - if (irq && cur_lvl) { - uint64_t now = get_time().val; - /* wait for the minimum spacing between IRQ_HPD if needed */ - if (now < svdm_hpd_deadline[port]) - usleep(svdm_hpd_deadline[port] - now); - - /* generate IRQ_HPD pulse */ - svdm_set_hpd_gpio(port, 0); - /* - * b/171172053#comment14: since the HPD_DSTREAM_DEBOUNCE_IRQ is - * very short (500us), we can use udelay instead of usleep for - * more stable pulse period. - */ - udelay(HPD_DSTREAM_DEBOUNCE_IRQ); - svdm_set_hpd_gpio(port, 1); - } else { - svdm_set_hpd_gpio(port, lvl); - } - - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - - mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | - (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); - usb_mux_hpd_update(port, mux_state); - -#ifdef USB_PD_PORT_TCPC_MST - if (port == USB_PD_PORT_TCPC_MST) - baseboard_mst_enable_control(port, lvl); -#endif - - /* ack */ - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - svdm_set_hpd_gpio(port, 0); -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); - -#ifdef USB_PD_PORT_TCPC_MST - if (port == USB_PD_PORT_TCPC_MST) - baseboard_mst_enable_control(port, 0); -#endif -} - -int pd_snk_is_vbus_provided(int port) -{ - static int vbus_prev[CONFIG_USB_PD_PORT_MAX_COUNT]; - int vbus; - - if ((IS_ENABLED(BOARD_HAYATO) && board_get_version() < 4) || - (IS_ENABLED(BOARD_SPHERION) && board_get_version() < 1)) - return ppc_is_vbus_present(port); - - /* - * (b:181203590#comment20) TODO(yllin): use - * PD_VSINK_DISCONNECT_PD for non-5V case. - */ - vbus = adc_read_channel(board_get_vbus_adc(port)) >= - PD_V_SINK_DISCONNECT_MAX; - -#ifdef CONFIG_USB_CHARGER - /* - * There's no PPC to inform VBUS change for usb_charger, so inform - * the usb_charger now. - */ - if (!!(vbus_prev[port] != vbus)) - usb_charger_vbus_change(port, vbus); - - if (vbus) - atomic_or(&vbus_prev[port], 1); - else - atomic_clear(&vbus_prev[port]); -#endif - return vbus; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_check_vconn_swap(int port) -{ - /* Allow Vconn swap if AP is on. */ - return chipset_in_state(CHIPSET_STATE_SUSPEND | CHIPSET_STATE_ON); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} diff --git a/baseboard/asurada/usbc_config.c b/baseboard/asurada/usbc_config.c deleted file mode 100644 index e552c97771..0000000000 --- a/baseboard/asurada/usbc_config.c +++ /dev/null @@ -1,431 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada baseboard-specific USB-C configuration */ - -#include "adc.h" -#include "baseboard_common.h" -#include "bc12/pi3usb9201_public.h" -#include "bc12/mt6360_public.h" -#include "button.h" -#include "charger.h" -#include "charge_state_v2.h" -#include "charger/isl923x_public.h" -#include "console.h" -#include "ec_commands.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "lid_switch.h" -#include "task.h" -#include "ppc/syv682x_public.h" -#include "power.h" -#include "power_button.h" -#include "spi.h" -#include "switch.h" -#include "tablet_mode.h" -#include "tcpm/it8xxx2_pd_public.h" -#include "uart.h" -#include "usbc_ppc.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_mux/ps8743_public.h" -#include "usb_mux/it5205_public.h" -#include "usb_pd_tcpm.h" -#include "usbc_ppc.h" - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -/* Baseboard */ - -static void baseboard_init(void) -{ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); - gpio_enable_interrupt(GPIO_AP_XHCI_INIT_DONE); -} -DECLARE_HOOK(HOOK_INIT, baseboard_init, HOOK_PRIO_DEFAULT-1); - -/* Sub-board */ - -enum board_sub_board board_get_sub_board(void) -{ - static enum board_sub_board sub = SUB_BOARD_NONE; - - if (sub != SUB_BOARD_NONE) - return sub; - - /* HDMI board has external pull high. */ - if (gpio_get_level(GPIO_EC_X_GPIO3)) { - sub = SUB_BOARD_HDMI; - /* Only has 1 PPC with HDMI subboard */ - ppc_cnt = 1; - /* EC_X_GPIO1 */ - gpio_set_flags(GPIO_EN_HDMI_PWR, GPIO_OUT_HIGH); - /* X_EC_GPIO2 */ - gpio_set_flags(GPIO_PS185_EC_DP_HPD, GPIO_INT_BOTH); - /* EC_X_GPIO3 */ - gpio_set_flags(GPIO_PS185_PWRDN_ODL, GPIO_ODR_HIGH); - } else { - sub = SUB_BOARD_TYPEC; - /* EC_X_GPIO1 */ - gpio_set_flags(GPIO_USB_C1_FRS_EN, GPIO_OUT_LOW); - /* X_EC_GPIO2 */ - gpio_set_flags(GPIO_USB_C1_PPC_INT_ODL, - GPIO_INT_BOTH | GPIO_PULL_UP); - /* EC_X_GPIO3 */ - gpio_set_flags(GPIO_USB_C1_DP_IN_HPD, GPIO_OUT_LOW); - } - - CPRINTS("Detect %s SUB", sub == SUB_BOARD_HDMI ? "HDMI" : "TYPEC"); - return sub; -} - -static void sub_board_init(void) -{ - board_get_sub_board(); -} -DECLARE_HOOK(HOOK_INIT, sub_board_init, HOOK_PRIO_INIT_I2C - 1); - -/* Detect subboard */ -static void board_tcpc_init(void) -{ - gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL); - /* C1: GPIO_USB_C1_PPC_INT_ODL & HDMI: GPIO_PS185_EC_DP_HPD */ - gpio_enable_interrupt(GPIO_X_EC_GPIO2); - - /* If this is not a Type-C subboard, disable the task. */ - if (board_get_sub_board() != SUB_BOARD_TYPEC) - task_disable_task(TASK_ID_PD_C1); -} -/* Must be done after I2C and subboard */ -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1); - -/* PPC */ -struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .i2c_port = I2C_PORT_PPC0, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, - .frs_en = GPIO_USB_C0_FRS_EN, - }, - { - .i2c_port = I2C_PORT_PPC1, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, - .frs_en = GPIO_USB_C1_FRS_EN, - }, -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/* BC12 */ -const struct mt6360_config_t mt6360_config = { - .i2c_port = I2C_PORT_POWER, - .i2c_addr_flags = MT6360_PMU_I2C_ADDR_FLAGS, -}; - -const struct pi3usb9201_config_t - pi3usb9201_bc12_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - /* [0]: unused */ - [1] = { - .i2c_port = I2C_PORT_PPC1, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - } -}; - -struct bc12_config bc12_ports[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { .drv = &mt6360_drv }, - { .drv = &pi3usb9201_drv }, -}; - -void bc12_interrupt(enum gpio_signal signal) -{ - if (signal == GPIO_USB_C0_BC12_INT_ODL) - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); - else - task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12); -} - -static void board_sub_bc12_init(void) -{ - if (board_get_sub_board() == SUB_BOARD_TYPEC) - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_L); - else - /* If this is not a Type-C subboard, disable the task. */ - task_disable_task(TASK_ID_USB_CHG_P1); -} -/* Must be done after I2C and subboard */ -DECLARE_HOOK(HOOK_INIT, board_sub_bc12_init, HOOK_PRIO_INIT_I2C + 1); - -void ppc_interrupt(enum gpio_signal signal) -{ - if (signal == GPIO_USB_C0_PPC_INT_ODL) - /* C0: PPC interrupt */ - syv682x_interrupt(0); -} - -__override uint8_t board_get_usb_pd_port_count(void) -{ - if (board_get_sub_board() == SUB_BOARD_TYPEC) - return CONFIG_USB_PD_PORT_MAX_COUNT; - else - return CONFIG_USB_PD_PORT_MAX_COUNT - 1; -} - -/* USB-A */ -const int usb_port_enable[] = { - GPIO_EN_PP5000_USB_A0_VBUS, -}; -BUILD_ASSERT(ARRAY_SIZE(usb_port_enable) == USB_PORT_COUNT); - -void usb_a0_interrupt(enum gpio_signal signal) -{ - enum usb_charge_mode mode = gpio_get_level(signal) ? - USB_CHARGE_MODE_ENABLED : USB_CHARGE_MODE_DISABLED; - - for (int i = 0; i < USB_PORT_COUNT; i++) - usb_charge_set_mode(i, mode, USB_ALLOW_SUSPEND_CHARGE); -} - -static int board_ps8743_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - int rv = EC_SUCCESS; - int reg = 0; - - rv = ps8743_read(me, PS8743_REG_MODE, ®); - if (rv) - return rv; - - /* Disable FLIP pin, enable I2C control. */ - reg |= PS8743_MODE_FLIP_REG_CONTROL; - /* Disable CE_USB pin, enable I2C control. */ - reg |= PS8743_MODE_USB_REG_CONTROL; - /* Disable CE_DP pin, enable I2C control. */ - reg |= PS8743_MODE_DP_REG_CONTROL; - - /* - * DP specific config - * - * Enable/Disable IN_HPD on the DB. - */ - gpio_set_level(GPIO_USB_C1_DP_IN_HPD, - mux_state & USB_PD_MUX_DP_ENABLED); - - return ps8743_write(me, PS8743_REG_MODE, reg); -} - -const struct usb_mux usbc0_virtual_mux = { - .usb_port = 0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; - -const struct usb_mux usbc1_virtual_mux = { - .usb_port = 1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_MUX0, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, - .next_mux = &usbc0_virtual_mux, - }, - { - .usb_port = 1, - .i2c_port = I2C_PORT_USB_MUX1, - .i2c_addr_flags = PS8743_I2C_ADDR0_FLAG, - .driver = &ps8743_usb_mux_driver, - .next_mux = &usbc1_virtual_mux, - .board_set = &board_ps8743_mux_set, - }, -}; - -void board_overcurrent_event(int port, int is_overcurrented) -{ - /* TODO: check correct operation for Asurada */ -} - -/* TCPC */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, -}; - -uint16_t tcpc_get_alert_status(void) -{ - /* - * C0 & C1: TCPC is embedded in the EC and processes interrupts in the - * chip code (it83xx/intc.c) - */ - return 0; -} - -void board_reset_pd_mcu(void) -{ - /* - * C0 & C1: TCPC is embedded in the EC and processes interrupts in the - * chip code (it83xx/intc.c) - */ -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit( - MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} - -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* - * We ignore the cc_pin and PPC vconn because polarity and PPC vconn - * should already be set correctly in the PPC driver via the pd - * state machine. - */ -} - -int board_set_active_charge_port(int port) -{ - int i; - int is_valid_port = port == 0 || (port == 1 && board_get_sub_board() == - SUB_BOARD_TYPEC); - - if (!is_valid_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - if (port == CHARGE_PORT_NONE) { - CPRINTS("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTS("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTS("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTS("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -/** - * Handle PS185 HPD changing state. - */ -int debounced_hpd; - -static void ps185_hdmi_hpd_deferred(void) -{ - const int new_hpd = gpio_get_level(GPIO_PS185_EC_DP_HPD); - - /* HPD status not changed, probably a glitch, just return. */ - if (debounced_hpd == new_hpd) - return; - - debounced_hpd = new_hpd; - - gpio_set_level(GPIO_EC_DPBRDG_HPD_ODL, !debounced_hpd); - CPRINTS(debounced_hpd ? "HDMI plug" : "HDMI unplug"); -} -DECLARE_DEFERRED(ps185_hdmi_hpd_deferred); - -#define PS185_HPD_DEBOUCE 250 - -static void hdmi_hpd_interrupt(enum gpio_signal signal) -{ - hook_call_deferred(&ps185_hdmi_hpd_deferred_data, PS185_HPD_DEBOUCE); -} - -/* HDMI/TYPE-C function shared subboard interrupt */ -void x_ec_interrupt(enum gpio_signal signal) -{ - int sub = board_get_sub_board(); - - if (sub == SUB_BOARD_TYPEC) - /* C1: PPC interrupt */ - syv682x_interrupt(1); - else if (sub == SUB_BOARD_HDMI) - hdmi_hpd_interrupt(signal); - else - CPRINTS("Undetected subboard interrupt."); -} - -int ppc_get_alert_status(int port) -{ - if (port == 0) - return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0; - if (port == 1 && board_get_sub_board() == SUB_BOARD_TYPEC) - return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0; - - return 0; -} - -#ifdef CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT -enum adc_channel board_get_vbus_adc(int port) -{ - if (port == 0) - return ADC_VBUS_C0; - if (port == 1) - return ADC_VBUS_C1; - CPRINTSUSB("Unknown vbus adc port id: %d", port); - return ADC_VBUS_C0; -} -#endif /* CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT */ diff --git a/baseboard/brask/baseboard.c b/baseboard/brask/baseboard.c deleted file mode 100644 index 2e60b565f8..0000000000 --- a/baseboard/brask/baseboard.c +++ /dev/null @@ -1,14 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "compile_time_macros.h" - -#include "gpio_signal.h" - -/* Wake up pins */ -const enum gpio_signal hibernate_wake_pins[] = { -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); diff --git a/baseboard/brask/baseboard.h b/baseboard/brask/baseboard.h deleted file mode 100644 index 4b9d8f386a..0000000000 --- a/baseboard/brask/baseboard.h +++ /dev/null @@ -1,213 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Brask baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * By default, enable all console messages excepted HC - */ -#define CC_DEFAULT (CC_ALL & ~(BIT(CC_HOSTCMD))) - -/* NPCX9 config */ -#define NPCX9_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ -/* - * This defines which pads (GPIO10/11 or GPIO64/65) are connected to - * the "UART1" (NPCX_UART_PORT0) controller when used for - * CONSOLE_UART. - */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 for UART1 */ - -/* CrOS Board Info */ -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CRC8 - -/* EC Defines */ -#define CONFIG_LTO -#define CONFIG_FPU - -/* Verified boot configs */ -#define CONFIG_VBOOT_EFS2 -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -/* Work around double CR50 reset by waiting in initial power on. */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -/* Host communication */ -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -#define CONFIG_HOSTCMD_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST - -/* LED */ -#define CONFIG_LED_COMMON - -/* Common charger defines */ -#define CONFIG_CHARGE_MANAGER - -/* USBC BC1.2 */ -#define CONFIG_USB_CHARGER -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* Support Barrel Jack */ -#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT -#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 -/* - * TODO(b/197475210): Don't allow the system to boot to S0 when - * the power is lower than CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON - * since there is no battery. - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 30000 - -/* Chipset config */ -#define CONFIG_CHIPSET_ALDERLAKE_SLG4BD44540 -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* - * TODO(b/191742284): When DAM enabled coreboot image is flashed on top of DAM - * disabled coreboot, S5 exit is taking more than 4 seconds, then EC triggers - * system shutdown. This WA deselects CONFIG_BOARD_HAS_RTC_RESET to prevent - * EC from system shutdown. - */ -/* #define CONFIG_BOARD_HAS_RTC_RESET */ - -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_HOSTCMD_AP_RESET - -/* Buttons */ -#define CONFIG_DEDICATED_RECOVERY_BUTTON -#define CONFIG_DEDICATED_RECOVERY_BUTTON_2 -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_POWER_BUTTON_INIT_IDLE -#define CONFIG_POWER_BUTTON_X86 - -/* Matrix Keyboard Protocol */ -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_INPUT_DEVICES -#define CONFIG_MKBP_USE_HOST_EVENT - -/* Thermal features */ -#define CONFIG_DPTF -#define CONFIG_THROTTLE_AP - -#define CONFIG_PWM - -/* Enable I2C Support */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER - -/* UART COMMAND */ -#define CONFIG_CMD_CHARGEN - -/* USB Type C and USB PD defines */ -/* Enable the new USB-C PD stack */ -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_REV30 - -#define CONFIG_CMD_HCDEBUG -#define CONFIG_CMD_PPC_DUMP -#define CONFIG_CMD_TCPC_DUMP - -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_ALT_MODE_UFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_NCT38XX - -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_HOSTCMD_PD_CONTROL /* Needed for TCPC FW update */ -#define CONFIG_CMD_USB_PD_PE - -/* - * The PS8815 TCPC was found to require a 50ms delay to consistently work - * with non-PD chargers. Override the default low-power mode exit delay. - */ -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (50*MSEC) - -/* Enable USB3.2 DRD */ -#define CONFIG_USB_PD_USB32_DRD - -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC - -#define CONFIG_USBC_PPC -/* Note - SN5S330 support automatically adds - * CONFIG_USBC_PPC_POLARITY - * CONFIG_USBC_PPC_SBU - * CONFIG_USBC_PPC_VCONN - */ -#define CONFIG_USBC_PPC_DEDICATED_INT - -#define CONFIG_USBC_SS_MUX -#define CONFIG_USB_MUX_VIRTUAL - -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Enabling SOP* communication */ -#define CONFIG_CMD_USB_PD_CABLE -#define CONFIG_USB_PD_DECODE_SOP - -/* - * USB ID - * This is allocated specifically for Brask - * http://google3/hardware/standards/usb/ - */ -#define CONFIG_USB_PID 0x5058 -/* Device version of product. */ -#define CONFIG_USB_BCD_DEV 0x0000 - -/* Remove predefined features */ -#undef CONFIG_HIBERNATE -#undef CONFIG_KEYBOARD_BOOT_KEYS -#undef CONFIG_KEYBOARD_RUNTIME_KEYS -#undef CONFIG_LID_SWITCH -#undef CONFIG_KEYBOARD_VIVALDI - -#ifndef __ASSEMBLER__ - -#include <stdbool.h> -#include <stdint.h> - -#include "common.h" -#include "baseboard_usbc_config.h" -#include "extpower.h" - -/* - * Configure run-time data structures and operation based on CBI data. This - * typically includes customization for changes in the BOARD_VERSION and - * FW_CONFIG fields in CBI. This routine is called from the baseboard after - * the CBI data has been initialized. - */ -__override_proto void board_cbi_init(void); - -/* - * Initialize the FW_CONFIG from CBI data. If the CBI data is not valid, set the - * FW_CONFIG to the board specific defaults. - */ -__override_proto void board_init_fw_config(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/brask/baseboard_usbc_config.h b/baseboard/brask/baseboard_usbc_config.h deleted file mode 100644 index 1b3d9e5d3f..0000000000 --- a/baseboard/brask/baseboard_usbc_config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* brask family-specific USB-C configuration */ - -#ifndef __CROS_EC_BASEBOARD_USBC_CONFIG_H -#define __CROS_EC_BASEBOARD_USBC_CONFIG_H - -#include "gpio_signal.h" - -/* Common definition for the USB PD interrupt handlers. */ -void bc12_interrupt(enum gpio_signal signal); -void ppc_interrupt(enum gpio_signal signal); -void retimer_interrupt(enum gpio_signal signal); -void tcpc_alert_event(enum gpio_signal signal); - -#endif /* __CROS_EC_BASEBOARD_USBC_CONFIG_H */ diff --git a/baseboard/brask/build.mk b/baseboard/brask/build.mk deleted file mode 100644 index 5ba6b135f9..0000000000 --- a/baseboard/brask/build.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Brask baseboard specific files build -# - -baseboard-y= -baseboard-y+=baseboard.o -baseboard-y+=usb_pd_policy.o diff --git a/baseboard/brask/usb_pd_policy.c b/baseboard/brask/usb_pd_policy.c deleted file mode 100644 index 33de5ca5eb..0000000000 --- a/baseboard/brask/usb_pd_policy.c +++ /dev/null @@ -1,204 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for Brask boards */ - -#include <stddef.h> -#include <stdint.h> - -#include "charge_manager.h" -#include "chipset.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "usbc_ppc.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd.h" -#include "usb_pd_tbt.h" -#include "usb_pd_tcpm.h" -#include "usb_pd_vdo.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap after the PP5000_Z1 rail is enabled */ - return gpio_get_level(GPIO_SEQ_EC_DSW_PWROK); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} - -/* ----------------- Vendor Defined Messages ------------------ */ -/* Responses specifically for the enablement of TBT mode in the role of UFP */ - -#define OPOS_TBT 1 - -static const union tbt_mode_resp_device vdo_tbt_modes[1] = { - { - .tbt_alt_mode = 0x0001, - .tbt_adapter = TBT_ADAPTER_TBT3, - .intel_spec_b0 = 0, - .vendor_spec_b0 = 0, - .vendor_spec_b1 = 0, - } -}; - -static const uint32_t vdo_idh = VDO_IDH( - 1, /* Data caps as USB host */ - 0, /* Not a USB device */ - IDH_PTYPE_PERIPH, - 1, /* Supports alt modes */ - USB_VID_GOOGLE); - -static const uint32_t vdo_idh_rev30 = VDO_IDH_REV30( - 1, /* Data caps as USB host */ - 0, /* Not a USB device */ - IDH_PTYPE_PERIPH, - 1, /* Supports alt modes */ - IDH_PTYPE_DFP_HOST, - USB_TYPEC_RECEPTACLE, - USB_VID_GOOGLE); - -static const uint32_t vdo_product = VDO_PRODUCT(CONFIG_USB_PID, - CONFIG_USB_BCD_DEV); - -/* TODO(b/168890624): add USB4 to capability once USB4 response implemented */ -static const uint32_t vdo_ufp1 = VDO_UFP1( - (VDO_UFP1_CAPABILITY_USB20 - | VDO_UFP1_CAPABILITY_USB32), - USB_TYPEC_RECEPTACLE, - VDO_UFP1_ALT_MODE_TBT3, - USB_R30_SS_U40_GEN3); - -static const uint32_t vdo_dfp = VDO_DFP( - (VDO_DFP_HOST_CAPABILITY_USB20 - | VDO_DFP_HOST_CAPABILITY_USB32 - | VDO_DFP_HOST_CAPABILITY_USB4), - USB_TYPEC_RECEPTACLE, - 1 /* Port 1 */); - -static int svdm_tbt_compat_response_identity(int port, uint32_t *payload) -{ - /* TODO(b/154962766): Get an XID */ - payload[VDO_I(CSTAT)] = VDO_CSTAT(0); - payload[VDO_I(PRODUCT)] = vdo_product; - - if (pd_get_rev(port, TCPCI_MSG_SOP) == PD_REV30) { - /* PD Revision 3.0 */ - payload[VDO_I(IDH)] = vdo_idh_rev30; - payload[VDO_I(PTYPE_UFP1_VDO)] = vdo_ufp1; - /* TODO(b/181620145): Customize for brya */ - payload[VDO_I(PTYPE_UFP2_VDO)] = 0; - payload[VDO_I(PTYPE_DFP_VDO)] = vdo_dfp; - return VDO_I(PTYPE_DFP_VDO) + 1; - } - - /* PD Revision 2.0 */ - payload[VDO_I(IDH)] = vdo_idh; - return VDO_I(PRODUCT) + 1; -} - -static int svdm_tbt_compat_response_svids(int port, uint32_t *payload) -{ - payload[1] = VDO_SVID(USB_VID_INTEL, 0); - return 2; -} - -static int svdm_tbt_compat_response_modes(int port, uint32_t *payload) -{ - if (PD_VDO_VID(payload[0]) == USB_VID_INTEL) { - memcpy(payload + 1, vdo_tbt_modes, sizeof(vdo_tbt_modes)); - return ARRAY_SIZE(vdo_tbt_modes) + 1; - } else { - return 0; /* NAK */ - } -} - -static int svdm_tbt_compat_response_enter_mode( - int port, uint32_t *payload) -{ - mux_state_t mux_state = 0; - - /* Do not enter mode while CPU is off. */ - if (chipset_in_or_transitioning_to_state(CHIPSET_STATE_ANY_OFF)) - return 0; /* NAK */ - - if ((PD_VDO_VID(payload[0]) != USB_VID_INTEL) || - (PD_VDO_OPOS(payload[0]) != OPOS_TBT)) - return 0; /* NAK */ - - mux_state = usb_mux_get(port); - /* - * Ref: USB PD 3.0 Spec figure 6-21 Successful Enter Mode sequence - * UFP (responder) should be in USB mode or safe mode before sending - * Enter Mode Command response. - */ - if ((mux_state & USB_PD_MUX_USB_ENABLED) || - (mux_state & USB_PD_MUX_SAFE_MODE)) { - pd_ufp_set_enter_mode(port, payload); - set_tbt_compat_mode_ready(port); - CPRINTS("UFP Enter TBT mode"); - return 1; /* ACK */ - } - - CPRINTS("UFP failed to enter TBT mode(mux=0x%x)", mux_state); - return 0; -} - -const struct svdm_response svdm_rsp = { - .identity = &svdm_tbt_compat_response_identity, - .svids = &svdm_tbt_compat_response_svids, - .modes = &svdm_tbt_compat_response_modes, - .enter_mode = &svdm_tbt_compat_response_enter_mode, - .amode = NULL, - .exit_mode = NULL, -}; diff --git a/baseboard/brya/baseboard.c b/baseboard/brya/baseboard.c deleted file mode 100644 index 976831812f..0000000000 --- a/baseboard/brya/baseboard.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "compile_time_macros.h" - -#include "gpio_signal.h" - -/* Wake up pins */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_ACOK_OD, - GPIO_GSC_EC_PWR_BTN_ODL, - GPIO_LID_OPEN, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); diff --git a/baseboard/brya/baseboard.h b/baseboard/brya/baseboard.h deleted file mode 100644 index 757b504d16..0000000000 --- a/baseboard/brya/baseboard.h +++ /dev/null @@ -1,259 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Brya baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -/* NPCX9 config */ -#define NPCX9_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ -/* - * This defines which pads (GPIO10/11 or GPIO64/65) are connected to - * the "UART1" (NPCX_UART_PORT0) controller when used for - * CONSOLE_UART. - */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 for UART1 */ - -/* EC Defines */ -#define CONFIG_LTO -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CRC8 -#define CONFIG_DPTF -#define CONFIG_FPU - -/* Verified boot configs */ -#define CONFIG_VBOOT_EFS2 -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#define CONFIG_HIBERNATE_PSL - -/* Work around double CR50 reset by waiting in initial power on. */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -/* Host communication */ -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -/* - * TODO(b/179648721): implement sensors - */ -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH -#define CONFIG_GMR_TABLET_MODE - -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_MKBP_INPUT_DEVICES - -/* LED */ -#define CONFIG_LED_COMMON - -/* Common charger defines */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 - -#define CONFIG_CMD_CHARGER_DUMP - -#define CONFIG_USB_CHARGER -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* - * Don't allow the system to boot to S0 when the battery is low and unable to - * communicate on locked systems (which haven't PD negotiated) - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 15001 - -/* Common battery defines */ -#define CONFIG_BATTERY_SMART -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_CMD_BATT_MFG_ACCESS -/* - * Enable support for battery hostcmd, supporting longer strings. - * support for EC_CMD_BATTERY_GET_STATIC version 1. - */ -#define CONFIG_BATTERY_V2 -#define CONFIG_BATTERY_COUNT 1 -#define CONFIG_HOSTCMD_BATTERY_V2 - -/* Chipset config */ -#define CONFIG_CHIPSET_ALDERLAKE_SLG4BD44540 - -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_LOW_POWER_IDLE - -#define CONFIG_HOSTCMD_ESPI_RESET_SLP_SX_VW_ON_ESPI_RST - -/* - * TODO(b/191742284): When DAM enabled coreboot image is flashed on top of DAM - * disabled coreboot, S5 exit is taking more than 4 seconds, then EC triggers - * system shutdown. This WA deselects CONFIG_BOARD_HAS_RTC_RESET to prevent - * EC from system shutdown. - */ -/* #define CONFIG_BOARD_HAS_RTC_RESET */ - -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_HOSTCMD_AP_RESET - -/* Buttons / Switches */ -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_SWITCH - -/* Common Keyboard Defines */ -#define CONFIG_CMD_KEYBOARD - -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_KEYPAD -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#ifdef CONFIG_KEYBOARD_VIVALDI -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2 -#else -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI3 -#endif - -/* Thermal features */ -#define CONFIG_THROTTLE_AP -#define CONFIG_CHIPSET_CAN_THROTTLE - -#define CONFIG_PWM - -/* Enable I2C Support */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER - -/* EDP back-light control defines */ -#define CONFIG_BACKLIGHT_LID - -/* UART COMMAND */ -#define CONFIG_CMD_CHARGEN - -/* USB Type C and USB PD defines */ -/* Enable the new USB-C PD stack */ -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_REV30 - -#define CONFIG_CMD_HCDEBUG -#define CONFIG_CMD_PPC_DUMP -#define CONFIG_CMD_TCPC_DUMP - -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_ALT_MODE_UFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_NCT38XX - -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_HOSTCMD_PD_CONTROL /* Needed for TCPC FW update */ -#define CONFIG_CMD_USB_PD_PE - -/* - * The PS8815 TCPC was found to require a 50ms delay to consistently work - * with non-PD chargers. Override the default low-power mode exit delay. - */ -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (50*MSEC) - -/* Enable USB3.2 DRD */ -#define CONFIG_USB_PD_USB32_DRD - -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC - -#define CONFIG_USBC_PPC -/* Note - SN5S330 support automatically adds - * CONFIG_USBC_PPC_POLARITY - * CONFIG_USBC_PPC_SBU - * CONFIG_USBC_PPC_VCONN - */ -#define CONFIG_USBC_PPC_DEDICATED_INT - -#define CONFIG_USBC_SS_MUX -#define CONFIG_USB_MUX_VIRTUAL - -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Enabling SOP* communication */ -#define CONFIG_CMD_USB_PD_CABLE -#define CONFIG_USB_PD_DECODE_SOP - -/* - * USB ID - * This is allocated specifically for Brya - * http://google3/hardware/standards/usb/ - */ -#define CONFIG_USB_PID 0x504F -/* Device version of product. */ -#define CONFIG_USB_BCD_DEV 0x0000 - -#ifndef __ASSEMBLER__ - -#include <stdbool.h> -#include <stdint.h> - -#include "common.h" -#include "baseboard_usbc_config.h" -#include "extpower.h" - -/** - * Configure run-time data structures and operation based on CBI data. This - * typically includes customization for changes in the BOARD_VERSION and - * FW_CONFIG fields in CBI. This routine is called from the baseboard after - * the CBI data has been initialized. - */ -__override_proto void board_cbi_init(void); - -/** - * Initialize the FW_CONFIG from CBI data. If the CBI data is not valid, set the - * FW_CONFIG to the board specific defaults. - */ -__override_proto void board_init_fw_config(void); - -/* - * Check battery disconnect state. - * This function will return if battery is initialized or not. - * @return true - initialized. false - not. - */ -__override_proto bool board_battery_is_initialized(void); - -/* - * Return the board revision number. - */ -uint8_t get_board_id(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/brya/baseboard_usbc_config.h b/baseboard/brya/baseboard_usbc_config.h deleted file mode 100644 index f8b9fab35c..0000000000 --- a/baseboard/brya/baseboard_usbc_config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* brya family-specific USB-C configuration */ - -#ifndef __CROS_EC_BASEBOARD_USBC_CONFIG_H -#define __CROS_EC_BASEBOARD_USBC_CONFIG_H - -#include "gpio_signal.h" - -/* Common definition for the USB PD interrupt handlers. */ -void bc12_interrupt(enum gpio_signal signal); -void ppc_interrupt(enum gpio_signal signal); -void retimer_interrupt(enum gpio_signal signal); -void tcpc_alert_event(enum gpio_signal signal); - -#endif /* __CROS_EC_BASEBOARD_USBC_CONFIG_H */ diff --git a/baseboard/brya/battery_presence.c b/baseboard/brya/battery_presence.c deleted file mode 100644 index 94c9926820..0000000000 --- a/baseboard/brya/battery_presence.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Common battery presence checking for Brya family. - * Each board should implement board_battery_info[] to define the specific - * battery packs supported. - */ -#include <stdbool.h> - -#include "battery.h" -#include "battery_smart.h" -#include "common.h" - -static enum battery_present batt_pres_prev = BP_NOT_SURE; - -__overridable bool board_battery_is_initialized(void) -{ - int batt_status; - - return battery_status(&batt_status) != EC_SUCCESS ? false : - !!(batt_status & STATUS_INITIALIZED); -} - -/* - * Physical detection of battery. - */ -static enum battery_present battery_check_present_status(void) -{ - enum battery_present batt_pres; - - if (battery_is_cut_off()) - return BP_NO; - - /* Get the physical hardware status */ - batt_pres = battery_hw_present(); - - /* - * If the battery is not physically connected, then no need to perform - * any more checks. - */ - if (batt_pres == BP_NO) - return BP_NO; - - /* - * If the battery is present now and was present last time we checked, - * return early. - */ - if ((batt_pres == BP_YES) && (batt_pres == batt_pres_prev)) - return BP_YES; - - /* - * Check battery initialization. If the battery is not initialized, - * then return BP_NOT_SURE. Battery could be in ship - * mode and might require pre-charge current to wake it up. BP_NO is not - * returned here because charger state machine will not provide - * pre-charge current assuming that battery is not present. - */ - if (!board_battery_is_initialized()) - return BP_NOT_SURE; - - return BP_YES; -} - -enum battery_present battery_is_present(void) -{ - batt_pres_prev = battery_check_present_status(); - return batt_pres_prev; -} diff --git a/baseboard/brya/build.mk b/baseboard/brya/build.mk deleted file mode 100644 index ca983f26ac..0000000000 --- a/baseboard/brya/build.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Brya baseboard specific files build -# - -baseboard-y= -baseboard-y+=baseboard.o -baseboard-y+=battery_presence.o -baseboard-y+=cbi.o -baseboard-y+=usb_pd_policy.o diff --git a/baseboard/brya/cbi.c b/baseboard/brya/cbi.c deleted file mode 100644 index 6d9e2b93fa..0000000000 --- a/baseboard/brya/cbi.c +++ /dev/null @@ -1,52 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <stdint.h> - -#include "console.h" -#include "common.h" -#include "cros_board_info.h" -#include "hooks.h" - -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args) - -static uint8_t board_id; - -uint8_t get_board_id(void) -{ - return board_id; -} - -__overridable void board_cbi_init(void) -{ -} - -__overridable void board_init_fw_config(void) -{ -} - -/* - * Read CBI from I2C EEPROM and initialize variables for board variants. - */ -static void cbi_init(void) -{ - uint32_t cbi_val; - - /* Board ID */ - if (cbi_get_board_version(&cbi_val) != EC_SUCCESS || - cbi_val > UINT8_MAX) - CPRINTS("CBI: Read Board ID failed"); - else - board_id = cbi_val; - - CPRINTS("Board ID: %d", board_id); - - board_init_fw_config(); - - /* Allow the board project to make runtime changes based on CBI data */ - board_cbi_init(); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_FIRST); diff --git a/baseboard/brya/charger_bq25720.c b/baseboard/brya/charger_bq25720.c deleted file mode 100644 index 04be67147d..0000000000 --- a/baseboard/brya/charger_bq25720.c +++ /dev/null @@ -1,90 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" - -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "charger.h" -#include "compile_time_macros.h" -#include "console.h" -#include "driver/charger/bq25710.h" -#include "usbc_ppc.h" -#include "usb_pd.h" -#include "util.h" - - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -/* Charger Chip Configuration */ -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = BQ25710_SMBUS_ADDR1_FLAGS, - .drv = &bq25710_drv, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(chg_chips) == CHARGER_NUM); - -int board_set_active_charge_port(int port) -{ - int is_valid_port = board_is_usb_pd_port_present(port); - int i; - - if (port == CHARGE_PORT_NONE) { - CPRINTSUSB("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } else if (!is_valid_port) { - return EC_ERROR_INVAL; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTFUSB("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTSUSB("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTSUSB("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -__overridable void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} diff --git a/baseboard/brya/usb_pd_policy.c b/baseboard/brya/usb_pd_policy.c deleted file mode 100644 index df291bd9c9..0000000000 --- a/baseboard/brya/usb_pd_policy.c +++ /dev/null @@ -1,204 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for Brya boards */ - -#include <stddef.h> -#include <stdint.h> - -#include "charge_manager.h" -#include "chipset.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "usbc_ppc.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd.h" -#include "usb_pd_tbt.h" -#include "usb_pd_tcpm.h" -#include "usb_pd_vdo.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap after the PP5000_Z1 rail is enabled */ - return gpio_get_level(GPIO_SEQ_EC_DSW_PWROK); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} - -/* ----------------- Vendor Defined Messages ------------------ */ -/* Responses specifically for the enablement of TBT mode in the role of UFP */ - -#define OPOS_TBT 1 - -static const union tbt_mode_resp_device vdo_tbt_modes[1] = { - { - .tbt_alt_mode = 0x0001, - .tbt_adapter = TBT_ADAPTER_TBT3, - .intel_spec_b0 = 0, - .vendor_spec_b0 = 0, - .vendor_spec_b1 = 0, - } -}; - -static const uint32_t vdo_idh = VDO_IDH( - 1, /* Data caps as USB host */ - 0, /* Not a USB device */ - IDH_PTYPE_PERIPH, - 1, /* Supports alt modes */ - USB_VID_GOOGLE); - -static const uint32_t vdo_idh_rev30 = VDO_IDH_REV30( - 1, /* Data caps as USB host */ - 0, /* Not a USB device */ - IDH_PTYPE_PERIPH, - 1, /* Supports alt modes */ - IDH_PTYPE_DFP_HOST, - USB_TYPEC_RECEPTACLE, - USB_VID_GOOGLE); - -static const uint32_t vdo_product = VDO_PRODUCT(CONFIG_USB_PID, - CONFIG_USB_BCD_DEV); - -/* TODO(b/168890624): add USB4 to capability once USB4 response implemented */ -static const uint32_t vdo_ufp1 = VDO_UFP1( - (VDO_UFP1_CAPABILITY_USB20 - | VDO_UFP1_CAPABILITY_USB32), - USB_TYPEC_RECEPTACLE, - VDO_UFP1_ALT_MODE_TBT3, - USB_R30_SS_U40_GEN3); - -static const uint32_t vdo_dfp = VDO_DFP( - (VDO_DFP_HOST_CAPABILITY_USB20 - | VDO_DFP_HOST_CAPABILITY_USB32 - | VDO_DFP_HOST_CAPABILITY_USB4), - USB_TYPEC_RECEPTACLE, - 1 /* Port 1 */); - -static int svdm_tbt_compat_response_identity(int port, uint32_t *payload) -{ - /* TODO(b/154962766): Get an XID */ - payload[VDO_I(CSTAT)] = VDO_CSTAT(0); - payload[VDO_I(PRODUCT)] = vdo_product; - - if (pd_get_rev(port, TCPCI_MSG_SOP) == PD_REV30) { - /* PD Revision 3.0 */ - payload[VDO_I(IDH)] = vdo_idh_rev30; - payload[VDO_I(PTYPE_UFP1_VDO)] = vdo_ufp1; - /* TODO(b/181620145): Customize for brya */ - payload[VDO_I(PTYPE_UFP2_VDO)] = 0; - payload[VDO_I(PTYPE_DFP_VDO)] = vdo_dfp; - return VDO_I(PTYPE_DFP_VDO) + 1; - } - - /* PD Revision 2.0 */ - payload[VDO_I(IDH)] = vdo_idh; - return VDO_I(PRODUCT) + 1; -} - -static int svdm_tbt_compat_response_svids(int port, uint32_t *payload) -{ - payload[1] = VDO_SVID(USB_VID_INTEL, 0); - return 2; -} - -static int svdm_tbt_compat_response_modes(int port, uint32_t *payload) -{ - if (PD_VDO_VID(payload[0]) == USB_VID_INTEL) { - memcpy(payload + 1, vdo_tbt_modes, sizeof(vdo_tbt_modes)); - return ARRAY_SIZE(vdo_tbt_modes) + 1; - } else { - return 0; /* NAK */ - } -} - -static int svdm_tbt_compat_response_enter_mode( - int port, uint32_t *payload) -{ - mux_state_t mux_state = 0; - - /* Do not enter mode while CPU is off. */ - if (chipset_in_or_transitioning_to_state(CHIPSET_STATE_ANY_OFF)) - return 0; /* NAK */ - - if ((PD_VDO_VID(payload[0]) != USB_VID_INTEL) || - (PD_VDO_OPOS(payload[0]) != OPOS_TBT)) - return 0; /* NAK */ - - mux_state = usb_mux_get(port); - /* - * Ref: USB PD 3.0 Spec figure 6-21 Successful Enter Mode sequence - * UFP (responder) should be in USB mode or safe mode before sending - * Enter Mode Command response. - */ - if ((mux_state & USB_PD_MUX_USB_ENABLED) || - (mux_state & USB_PD_MUX_SAFE_MODE)) { - pd_ufp_set_enter_mode(port, payload); - set_tbt_compat_mode_ready(port); - CPRINTS("UFP Enter TBT mode"); - return 1; /* ACK */ - } - - CPRINTS("UFP failed to enter TBT mode(mux=0x%x)", mux_state); - return 0; -} - -const struct svdm_response svdm_rsp = { - .identity = &svdm_tbt_compat_response_identity, - .svids = &svdm_tbt_compat_response_svids, - .modes = &svdm_tbt_compat_response_modes, - .enter_mode = &svdm_tbt_compat_response_enter_mode, - .amode = NULL, - .exit_mode = NULL, -}; diff --git a/baseboard/cherry/baseboard.c b/baseboard/cherry/baseboard.c deleted file mode 100644 index daf5e218d2..0000000000 --- a/baseboard/cherry/baseboard.c +++ /dev/null @@ -1,597 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Cherry baseboard-specific configuration */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charger.h" -#include "charge_state.h" -#include "charge_state_v2.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accelgyro_icm42607.h" -#include "driver/bc12/mt6360.h" -#include "driver/bc12/pi3usb9201.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/rt1718s.h" -#include "driver/ppc/syv682x.h" -#include "driver/retimer/ps8802.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/tcpm/rt1718s.h" -#include "driver/temp_sensor/thermistor.h" -#include "driver/usb_mux/anx3443.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "power_button.h" -#include "power.h" -#include "pwm_chip.h" -#include "pwm.h" -#include "regulator.h" -#include "spi.h" -#include "switch.h" -#include "tablet_mode.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" -#include "usb_charge.h" -#include "usbc_ppc.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" - -static void bc12_interrupt(enum gpio_signal signal); -static void ppc_interrupt(enum gpio_signal signal); -static void usb_a0_interrupt(enum gpio_signal signal); - -#include "gpio_list.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) - -/* Wake-up pins for hibernate */ -enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, -}; -int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -/* Override default setting, called after charger_chips_init */ -static void baseboard_charger_init(void) -{ - /* b/198707662#comment9 */ - int reg = (4096 / ISL9238_INPUT_VOLTAGE_REF_STEP) - << ISL9238_INPUT_VOLTAGE_REF_SHIFT; - - i2c_write16(I2C_PORT_CHARGER, ISL923X_ADDR_FLAGS, - ISL9238_REG_INPUT_VOLTAGE, reg); -} -DECLARE_HOOK(HOOK_INIT, baseboard_charger_init, HOOK_PRIO_DEFAULT + 2); - -__override void board_hibernate_late(void) -{ - /* - * Turn off PP5000_A. Required for devices without Z-state. - * Don't care for devices with Z-state. - */ - gpio_set_level(GPIO_EN_PP5000_A, 0); - isl9238c_hibernate(CHARGER_SOLO); - gpio_set_level(GPIO_EN_SLP_Z, 1); - - /* should not reach here */ - __builtin_unreachable(); -} - -static void board_tcpc_init(void) -{ - gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_INT_ODL); -} -/* Must be done after I2C */ -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1); - -void rt1718s_tcpc_interrupt(enum gpio_signal signal) -{ - schedule_deferred_pd_interrupt(1); -} - -/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ -const struct adc_t adc_channels[] = { - /* Convert to mV (3000mV/1024). */ - {"VBUS", ADC_MAX_MVOLT * 10, ADC_READ_MAX + 1, 0, CHIP_ADC_CH0}, - {"BOARD_ID_0", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH1}, - {"BOARD_ID_1", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH2}, - /* AMON/BMON gain = 17.97 */ - {"CHARGER_AMON_R", ADC_MAX_MVOLT * 1000 / 17.97, ADC_READ_MAX + 1, 0, - CHIP_ADC_CH3}, - {"CHARGER_PMON", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH6}, - {"TEMP_SENSOR_CHG", ADC_MAX_MVOLT, ADC_READ_MAX + 1, 0, CHIP_ADC_CH7}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_CHARGER] = { - .name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_CHARGER, - }, -}; - -/* PPC */ -struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .i2c_port = I2C_PORT_PPC0, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, - .frs_en = GPIO_USB_C0_FRS_EN, - }, - { - .i2c_port = I2C_PORT_PPC1, - .i2c_addr_flags = RT1718S_I2C_ADDR_FLAGS, - .drv = &rt1718s_ppc_drv, - }, -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/* BC12 */ -const struct mt6360_config_t mt6360_config = { - .i2c_port = 0, - .i2c_addr_flags = MT6360_PMU_I2C_ADDR_FLAGS, -}; - -__maybe_unused const struct pi3usb9201_config_t - pi3usb9201_bc12_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [0] = { - .i2c_port = I2C_PORT_USB0, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - } - /* [1]: unused */ -}; - -struct bc12_config bc12_ports[CONFIG_USB_PD_PORT_MAX_COUNT] = { -#ifdef CONFIG_BC12_DETECT_PI3USB9201 - { .drv = &pi3usb9201_drv }, -#elif defined(CONFIG_BC12_DETECT_MT6360) - { .drv = &mt6360_drv }, -#else -#error must pick one of PI3USB9201 or MT6360 for port 0 -#endif - { .drv = &rt1718s_bc12_drv }, -}; - -static void bc12_interrupt(enum gpio_signal signal) -{ - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); -} - -static void ppc_interrupt(enum gpio_signal signal) -{ - syv682x_interrupt(0); -} - -/* PWM */ - -/* - * PWM channels. Must be in the exactly same order as in enum pwm_channel. - * There total three 16 bits clock prescaler registers for all pwm channels, - * so use the same frequency and prescaler register setting is required if - * number of pwm channel greater than three. - */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_LED1] = { - .channel = 0, - .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, - .freq_hz = 324, /* maximum supported frequency */ - .pcfsr_sel = PWM_PRESCALER_C4, - }, - [PWM_CH_LED2] = { - .channel = 1, - .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, - .freq_hz = 324, /* maximum supported frequency */ - .pcfsr_sel = PWM_PRESCALER_C4, - }, - [PWM_CH_LED3] = { - .channel = 2, - .flags = PWM_CONFIG_DSLEEP | PWM_CONFIG_ACTIVE_LOW, - .freq_hz = 324, /* maximum supported frequency */ - .pcfsr_sel = PWM_PRESCALER_C4, - }, - [PWM_CH_KBLIGHT] = { - .channel = 3, - .flags = 0, - .freq_hz = 10000, /* SYV226 supports 10~100kHz */ - .pcfsr_sel = PWM_PRESCALER_C6, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -/* Called on AP S3 -> S0 transition */ -static void board_chipset_resume(void) -{ - gpio_set_level(GPIO_EC_BL_EN_OD, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S3 transition */ -static void board_chipset_suspend(void) -{ - gpio_set_level(GPIO_EC_BL_EN_OD, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); - -/* USB-A */ -const int usb_port_enable[] = { - GPIO_EN_PP5000_USB_A0_VBUS_X, -}; -BUILD_ASSERT(ARRAY_SIZE(usb_port_enable) == USB_PORT_COUNT); - -__maybe_unused void usb_a0_interrupt(enum gpio_signal signal) -{ - enum usb_charge_mode mode = gpio_get_level(signal) ? - USB_CHARGE_MODE_ENABLED : USB_CHARGE_MODE_DISABLED; - - for (int i = 0; i < USB_PORT_COUNT; i++) - usb_charge_set_mode(i, mode, USB_ALLOW_SUSPEND_CHARGE); -} - -/* USB Mux */ - -const struct usb_mux usbc0_virtual_mux = { - .usb_port = 0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; - -const struct usb_mux usbc1_virtual_mux = { - .usb_port = 1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; - -static int board_ps8802_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - /* Make sure the PS8802 is awake */ - RETURN_ERROR(ps8802_i2c_wake(me)); - - /* USB specific config */ - if (mux_state & USB_PD_MUX_USB_ENABLED) { - /* Boost the USB gain */ - RETURN_ERROR(ps8802_i2c_field_update16(me, - PS8802_REG_PAGE2, - PS8802_REG2_USB_SSEQ_LEVEL, - PS8802_USBEQ_LEVEL_UP_MASK, - PS8802_USBEQ_LEVEL_UP_19DB)); - } - - /* DP specific config */ - if (mux_state & USB_PD_MUX_DP_ENABLED) { - /* Boost the DP gain */ - RETURN_ERROR(ps8802_i2c_field_update8(me, - PS8802_REG_PAGE2, - PS8802_REG2_DPEQ_LEVEL, - PS8802_DPEQ_LEVEL_UP_MASK, - PS8802_DPEQ_LEVEL_UP_19DB)); - } - - return EC_SUCCESS; -} - -static int board_anx3443_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - gpio_set_level(GPIO_USB_C1_DP_IN_HPD, - mux_state & USB_PD_MUX_DP_ENABLED); - return EC_SUCCESS; -} - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_MUX0, - .i2c_addr_flags = PS8802_I2C_ADDR_FLAGS, - .driver = &ps8802_usb_mux_driver, - .next_mux = &usbc0_virtual_mux, - .board_set = &board_ps8802_mux_set, - }, - { - .usb_port = 1, - .i2c_port = I2C_PORT_USB_MUX1, - .i2c_addr_flags = ANX3443_I2C_ADDR0_FLAGS, - .driver = &anx3443_usb_mux_driver, - .next_mux = &usbc1_virtual_mux, - .board_set = &board_anx3443_mux_set, - }, -}; - -/* - * I2C channels (A, B, and C) are using the same timing registers (00h~07h) - * at default. - * In order to set frequency independently for each channels, - * We use timing registers 09h~0Bh, and the supported frequency will be: - * 50KHz, 100KHz, 400KHz, or 1MHz. - * I2C channels (D, E and F) can be set different frequency on different ports. - * The I2C(D/E/F) frequency depend on the frequency of SMBus Module and - * the individual prescale register. - * The frequency of SMBus module is 24MHz on default. - * The allowed range of I2C(D/E/F) frequency is as following setting. - * SMBus Module Freq = PLL_CLOCK / ((IT83XX_ECPM_SCDCR2 & 0x0F) + 1) - * (SMBus Module Freq / 510) <= I2C Freq <= (SMBus Module Freq / 8) - * Channel D has multi-function and can be used as UART interface. - * Channel F is reserved for EC debug. - */ - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"bat_chg", IT83XX_I2C_CH_A, 100, GPIO_I2C_A_SCL, GPIO_I2C_A_SDA}, - {"sensor", IT83XX_I2C_CH_B, 400, GPIO_I2C_B_SCL, GPIO_I2C_B_SDA}, - {"usb0", IT83XX_I2C_CH_C, 400, GPIO_I2C_C_SCL, GPIO_I2C_C_SDA}, - {"usb1", IT83XX_I2C_CH_E, 1000, GPIO_I2C_E_SCL, GPIO_I2C_E_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY); -} - -/* TCPC */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB1, - .addr_flags = RT1718S_I2C_ADDR_FLAGS, - }, - .drv = &rt1718s_tcpm_drv, - }, -}; - -__override int board_rt1718s_init(int port) -{ - /* set GPIO 1~3 as push pull, as output, output low. */ - rt1718s_gpio_set_flags(port, RT1718S_GPIO1, GPIO_OUT_LOW); - rt1718s_gpio_set_flags(port, RT1718S_GPIO2, GPIO_OUT_LOW); - rt1718s_gpio_set_flags(port, RT1718S_GPIO3, GPIO_OUT_LOW); - - /* gpio 1/2 output high when receiving frx signal */ - RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_GPIO1_VBUS_CTRL, - RT1718S_GPIO1_VBUS_CTRL_FRS_RX_VBUS, 0xFF)); - RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_GPIO2_VBUS_CTRL, - RT1718S_GPIO2_VBUS_CTRL_FRS_RX_VBUS, 0xFF)); - - /* Turn on SBU switch */ - RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_RT2_SBU_CTRL_01, - RT1718S_RT2_SBU_CTRL_01_SBU_VIEN | - RT1718S_RT2_SBU_CTRL_01_SBU2_SWEN | - RT1718S_RT2_SBU_CTRL_01_SBU1_SWEN, - 0xFF)); - /* Trigger GPIO 1/2 change when FRS signal received */ - RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_FRS_CTRL3, - RT1718S_FRS_CTRL3_FRS_RX_WAIT_GPIO2 | - RT1718S_FRS_CTRL3_FRS_RX_WAIT_GPIO1, - RT1718S_FRS_CTRL3_FRS_RX_WAIT_GPIO2)); - /* Set FRS signal detect time to 46.875us */ - RETURN_ERROR(rt1718s_update_bits8(port, RT1718S_FRS_CTRL1, - RT1718S_FRS_CTRL1_FRSWAPRX_MASK, - 0xFF)); - - return EC_SUCCESS; -} - -const struct cc_para_t *board_get_cc_tuning_parameter(enum usbpd_port port) -{ - const static struct cc_para_t cc_parameter = { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }; - - if (port == USBPD_PORT_A) - return &cc_parameter; - return NULL; -} - -uint16_t tcpc_get_alert_status(void) -{ - /* - * C0 TCPC is embedded in the EC and processes interrupts in the - * chip code (it83xx/intc.c) - */ - if (!gpio_get_level(GPIO_USB_C1_INT_ODL)) - return PD_STATUS_TCPC_ALERT_1; - return 0; -} - -void board_reset_pd_mcu(void) -{ - /* - * C0: The internal TCPC on ITE EC does not have a reset signal, - * but it will get reset when the EC gets reset. - */ - /* C1: Add code if TCPC chips need a reset */ -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit( - MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} - -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* - * We ignore the cc_pin and PPC vconn because polarity and PPC vconn - * should already be set correctly in the PPC driver via the pd - * state machine. - */ -} - -int board_set_active_charge_port(int port) -{ - int i; - bool is_valid_port = (port == 0 || port == 1); - - if (!is_valid_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - if (port == CHARGE_PORT_NONE) { - CPRINTS("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("Disabling C%d as sink failed.", i); - } - rt1718s_gpio_set_level(1, GPIO_EN_USB_C1_VBUS_L, 1); - - return EC_SUCCESS; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTS("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTS("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTS("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - rt1718s_gpio_set_level(1, GPIO_EN_USB_C1_VBUS_L, !(port == 1)); - - return EC_SUCCESS; -} - -int ppc_get_alert_status(int port) -{ - if (port == 0) - return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0; - - /* TODO: add rt1718s */ - return 0; -} -/* SD Card */ -int board_regulator_get_info(uint32_t index, char *name, - uint16_t *num_voltages, uint16_t *voltages_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_get_info(id, name, num_voltages, - voltages_mv); -} - -int board_regulator_enable(uint32_t index, uint8_t enable) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_enable(id, enable); -} - -int board_regulator_is_enabled(uint32_t index, uint8_t *enabled) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_is_enabled(id, enabled); -} - -int board_regulator_set_voltage(uint32_t index, uint32_t min_mv, - uint32_t max_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_set_voltage(id, min_mv, max_mv); -} - -int board_regulator_get_voltage(uint32_t index, uint32_t *voltage_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_get_voltage(id, voltage_mv); -} - -static void baseboard_init(void) -{ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); -#ifndef BOARD_CHERRY - gpio_enable_interrupt(GPIO_AP_XHCI_INIT_DONE); -#endif -} -DECLARE_HOOK(HOOK_INIT, baseboard_init, HOOK_PRIO_DEFAULT - 1); - -__override int board_pd_set_frs_enable(int port, int enable) -{ - if (port == 1) - /* - * Use set_flags (implemented by a single i2c write) instead - * of set_level (= i2c_update) to save one read operation in - * FRS path. - */ - rt1718s_gpio_set_flags(port, GPIO_EN_USB_C1_FRS, - enable ? GPIO_OUT_HIGH : GPIO_OUT_LOW); - return EC_SUCCESS; -} - -__override int board_get_vbus_voltage(int port) -{ - int voltage = 0; - - switch (port) { - case 0: - voltage = adc_read_channel(ADC_VBUS); - break; - case 1: - rt1718s_get_adc(port, RT1718S_ADC_VBUS1, &voltage); - break; - default: - return 0; - } - - return voltage; -} diff --git a/baseboard/cherry/baseboard.h b/baseboard/cherry/baseboard.h deleted file mode 100644 index 8dc1dbfb91..0000000000 --- a/baseboard/cherry/baseboard.h +++ /dev/null @@ -1,242 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Cherry board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* IT81202-bx config */ -/* - * NOTE: we need to make correct VCC voltage selection here if EC's VCC isn't - * connect to 1.8v on other versions. - */ -#define CONFIG_IT83XX_VCC_1P8V - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON -#define CONFIG_CHIPSET_MT8192 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_HIBERNATE_WAKE_PINS_DYNAMIC -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* Chipset */ -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_CMD_POWERINDEBUG -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_S0 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_COMMON -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_WP_ACTIVE_HIGH - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_BATTERY_SMART - -/* BC12 */ -#ifdef BOARD_CHERRY -#define CONFIG_BC12_DETECT_PI3USB9201 -#endif -#define CONFIG_BC12_DETECT_MT6360 -#undef CONFIG_BC12_SINGLE_DRIVER -#define CONFIG_USB_CHARGER - -/* CBI */ -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CBI_EEPROM -#define CONFIG_CMD_CBI -#define I2C_PORT_EEPROM IT83XX_I2C_CH_A -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -/* Charger */ -#define ADC_AMON_BMON ADC_CHARGER_AMON_R /* ADC name remap */ -#define ADC_PSYS ADC_CHARGER_PMON /* ADC name remap */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_ISL9238C -#define CONFIG_CHARGER_MAINTAIN_VBAT -/* Not used in boot flow, set to 0 to suppress system_can_boot_ap warning */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 0 -#define CONFIG_CHARGER_OTG -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_PSYS_READ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* BOARD_RS2 */ -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* BOARD_RS1 */ -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON - -/* Keyboard */ -#define CONFIG_CMD_KEYBOARD -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_GPIO - -/* I2C */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_I2C_VIRTUAL_BATTERY -#define I2C_PORT_CHARGER IT83XX_I2C_CH_A -#define I2C_PORT_BATTERY IT83XX_I2C_CH_A -#define I2C_PORT_ACCEL IT83XX_I2C_CH_B -#define I2C_PORT_PPC0 IT83XX_I2C_CH_C -#define I2C_PORT_PPC1 IT83XX_I2C_CH_E -#define I2C_PORT_USB0 IT83XX_I2C_CH_C -#define I2C_PORT_USB1 IT83XX_I2C_CH_E -#define I2C_PORT_USB_MUX0 IT83XX_I2C_CH_C -#define I2C_PORT_USB_MUX1 IT83XX_I2C_CH_E -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define CONFIG_SMBUS_PEC - -/* LED */ -#define CONFIG_LED_COMMON - -/* PD / USB-C / PPC */ -#define CONFIG_USB_PD_DEBUG_LEVEL 3 -#define CONFIG_CMD_PPC_DUMP -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_IT83XX_TUNE_CC_PHY -#define CONFIG_USBC_PPC -#define CONFIG_USBC_PPC_DEDICATED_INT -#define CONFIG_USBC_PPC_POLARITY -#define CONFIG_USBC_PPC_RT1718S -#define CONFIG_USBC_PPC_SYV682X -#define CONFIG_USBC_PPC_VCONN -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USBC_RETIMER_PS8802 /* C0 */ -#define CONFIG_USB_MUX_ANX3443 /* C1 */ -#define CONFIG_USB_MUX_VIRTUAL -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_DISCHARGE -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DPS -#define CONFIG_USB_PD_DP_HPD_GPIO -#define CONFIG_USB_PD_DP_HPD_GPIO_CUSTOM -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_FRS_PPC -#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 1 -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_PPC -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP -#define CONFIG_USB_PD_TCPM_RT1718S -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USB_PD_VBUS_MEASURE_BY_BOARD -#define CONFIG_USB_PID 0x5054 -#define CONFIG_USB_POWER_DELIVERY - -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* USB-A */ -#define CONFIG_USB_PORT_POWER_DUMB -#define CONFIG_USB_PORT_POWER_DUMB_CUSTOM_HOOK -#define USB_PORT_COUNT USBA_PORT_COUNT - -/* UART */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Sensor */ -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CMD_ACCELS - -#define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#define CONFIG_ACCEL_INTERRUPTS - -/* SPI / Host Command */ -#define CONFIG_SPI - -/* MKBP */ -#define CONFIG_MKBP_EVENT - -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_GPIO - -/* Voltage regulator control */ -#define CONFIG_HOSTCMD_REGULATOR - -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" -#include "power/mt8192.h" - -enum adc_channel { - ADC_VBUS, /* ADC 0 */ - ADC_BOARD_ID, /* ADC 1 */ - ADC_SKU_ID, /* ADC 2 */ - ADC_CHARGER_AMON_R, /* ADC 3 */ - ADC_CHARGER_PMON, /* ADC 6 */ - ADC_TEMP_SENSOR_CHARGER, /* ADC 7 */ - - /* Number of ADC channels */ - ADC_CH_COUNT, -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER, - TEMP_SENSOR_COUNT, -}; - -enum pwm_channel { - PWM_CH_LED1, - PWM_CH_LED2, - PWM_CH_LED3, - PWM_CH_KBLIGHT, - PWM_CH_COUNT, -}; - -void board_reset_pd_mcu(void); -void rt1718s_tcpc_interrupt(enum gpio_signal signal); - -/* RT1718S gpio to pin name mapping */ -#define GPIO_EN_USB_C1_VBUS_L RT1718S_GPIO1 -#define GPIO_EN_USB_C1_5V_OUT RT1718S_GPIO2 -#define GPIO_EN_USB_C1_FRS RT1718S_GPIO3 - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/cherry/build.mk b/baseboard/cherry/build.mk deleted file mode 100644 index ae82c1ca68..0000000000 --- a/baseboard/cherry/build.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/baseboard/cherry/usb_pd_policy.c b/baseboard/cherry/usb_pd_policy.c deleted file mode 100644 index 0c7f4dcee5..0000000000 --- a/baseboard/cherry/usb_pd_policy.c +++ /dev/null @@ -1,260 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include "adc.h" -#include "atomic.h" -#include "charge_manager.h" -#include "chipset.h" -#include "driver/tcpm/rt1718s.h" -#include "driver/tcpm/tcpci.h" -#include "timer.h" -#include "usb_dp_alt_mode.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" - -#if CONFIG_USB_PD_3A_PORTS != 1 -#error Cherry reference must have at least one 3.0 A port -#endif - -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) - -/* The port that the aux channel is on. */ -static enum { - AUX_PORT_NONE = -1, - AUX_PORT_C0 = 0, - AUX_PORT_C1HDMI = 1, -} aux_port = AUX_PORT_NONE; - -int svdm_get_hpd_gpio(int port) -{ - /* HPD is low active, inverse the result */ - return !gpio_get_level(GPIO_EC_AP_DP_HPD_ODL); -} - -void svdm_set_hpd_gpio(int port, int en) -{ - /* - * HPD is low active, inverse the en - * TODO: C0&C1 shares the same HPD, implement FCFS policy. - */ - gpio_set_level(GPIO_EC_AP_DP_HPD_ODL, !en); -} - -static void aux_switch_port(int port) -{ - if (port != AUX_PORT_NONE) - gpio_set_level_verbose(CC_USBPD, GPIO_DP_PATH_SEL, !port); - aux_port = port; -} - -static void aux_display_disconnected(int port) -{ - /* Gets the other port. C0 -> C1, C1 -> C0. */ - int other_port = !port; - - /* If the current port is not the aux port, nothing needs to be done. */ - if (aux_port != port) - return; - - /* If the other port is connected to a external display, switch aux. */ - if (dp_status[other_port] & DP_FLAGS_DP_ON) - aux_switch_port(other_port); - else - aux_switch_port(AUX_PORT_NONE); -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); - int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - int cur_lvl = svdm_get_hpd_gpio(port); -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - mux_state_t mux_state; - - dp_status[port] = payload[1]; - - if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && - (irq || lvl)) - /* - * Wake up the AP. IRQ or level high indicates a DP sink is now - * present. - */ - if (IS_ENABLED(CONFIG_MKBP_EVENT)) - pd_notify_dp_alt_mode_entry(port); - - /* Its initial DP status message prior to config */ - if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { - if (lvl) - dp_flags[port] |= DP_FLAGS_HPD_HI_PENDING; - return 1; - } - -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - if (irq && !lvl) { - /* - * IRQ can only be generated when the level is high, because - * the IRQ is signaled by a short low pulse from the high level. - */ - CPRINTF("ERR:HPD:IRQ&LOW\n"); - return 0; /* nak */ - } - - if (irq && cur_lvl) { - uint64_t now = get_time().val; - /* wait for the minimum spacing between IRQ_HPD if needed */ - if (now < svdm_hpd_deadline[port]) - usleep(svdm_hpd_deadline[port] - now); - - /* generate IRQ_HPD pulse */ - svdm_set_hpd_gpio(port, 0); - /* - * b/171172053#comment14: since the HPD_DSTREAM_DEBOUNCE_IRQ is - * very short (500us), we can use udelay instead of usleep for - * more stable pulse period. - */ - udelay(HPD_DSTREAM_DEBOUNCE_IRQ); - svdm_set_hpd_gpio(port, 1); - } else { - svdm_set_hpd_gpio(port, lvl); - } - - /* - * Cherry can only output to 1 display port at a time. - * This implements FCFS policy by changing the aux channel. If a - * display is connected to the either port (says A), and the port A - * will be served until the display is disconnected from port A. - * It won't output to the other display which connects to port B. - */ - if (lvl && aux_port == AUX_PORT_NONE) - /* - * A display is connected, and no display was plugged on either - * port. - */ - aux_switch_port(port); - else if (!lvl) - aux_display_disconnected(port); - - - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - - mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | - (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); - usb_mux_hpd_update(port, mux_state); - -#ifdef USB_PD_PORT_TCPC_MST - if (port == USB_PD_PORT_TCPC_MST) - baseboard_mst_enable_control(port, lvl); -#endif - - /* ack */ - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - svdm_set_hpd_gpio(port, 0); -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); - - aux_display_disconnected(port); - -#ifdef USB_PD_PORT_TCPC_MST - if (port == USB_PD_PORT_TCPC_MST) - baseboard_mst_enable_control(port, 0); -#endif -} - -int pd_snk_is_vbus_provided(int port) -{ - static atomic_t vbus_prev[CONFIG_USB_PD_PORT_MAX_COUNT]; - int vbus; - - /* - * Use ppc_is_vbus_present for all ports on Cherry, and - * port 1 on other devices. - */ - if (IS_ENABLED(BOARD_CHERRY) || port == 1) - return ppc_is_vbus_present(port); - - /* b/181203590: use ADC for port 0 (syv682x) */ - vbus = (adc_read_channel(ADC_VBUS) >= PD_V_SINK_DISCONNECT_MAX); - -#ifdef CONFIG_USB_CHARGER - /* - * There's no PPC to inform VBUS change for usb_charger, so inform - * the usb_charger now. - */ - if (!!(vbus_prev[port] != vbus)) - usb_charger_vbus_change(port, vbus); - - if (vbus) - atomic_or(&vbus_prev[port], 1); - else - atomic_clear(&vbus_prev[port]); -#endif - return vbus; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - if (port == 1) - rt1718s_gpio_set_level(port, GPIO_EN_USB_C1_5V_OUT, 0); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_check_vconn_swap(int port) -{ - /* Allow Vconn swap if AP is on. */ - return chipset_in_state(CHIPSET_STATE_SUSPEND | CHIPSET_STATE_ON); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - if (port == 1) - rt1718s_gpio_set_level(port, GPIO_EN_USB_C1_5V_OUT, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} diff --git a/baseboard/dedede/baseboard.c b/baseboard/dedede/baseboard.c deleted file mode 100644 index 2f71f03068..0000000000 --- a/baseboard/dedede/baseboard.c +++ /dev/null @@ -1,311 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Dedede family-specific configuration */ - -#include "adc.h" -#include "board_config.h" -#include "cbi_fw_config.h" -#include "charger/isl923x_public.h" -#include "charger/sm5803.h" -#include "chipset.h" -#include "common.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "power/icelake.h" -#include "power/intel_x86.h" -#include "system.h" -#include "usb_pd.h" - -/******************************************************************************/ -/* - * PWROK signal configuration, see the PWROK Generation Flow Diagram in the - * Jasper Lake Platform Design Guide for the list of potential signals. - * - * Dedede boards use this PWROK sequence: - * GPIO_ALL_SYS_PWRGD - turns on VCCIN rail - * GPIO_EC_AP_VCCST_PWRGD_OD - asserts VCCST_PWRGD to AP, requires 2ms - * delay from VCCST stable to meet the tCPU00 platform sequencing - * timing - * GPIO_EC_AP_PCH_PWROK_OD - asserts PMC_PCH_PWROK to the AP. Note that - * PMC_PCH_PWROK is also gated by the IMVP9_VRRDY_OD output from - * the VCCIN voltage rail controller. - * GPIO_EC_AP_SYS_PWROK - asserts PMC_SYS_PWROK to the AP - * - * Both PMC_PCH_PWROK and PMC_SYS_PWROK signals must both be asserted before - * the Jasper Lake SoC deasserts PMC_RLTRST_N. The platform may deassert - * PMC_PCH_PWROK and PMC_SYS_PWROK in any order to optimize overall boot - * latency. - */ -const struct intel_x86_pwrok_signal pwrok_signal_assert_list[] = { - { - .gpio = GPIO_ALL_SYS_PWRGD, - }, - { - .gpio = GPIO_EC_AP_VCCST_PWRGD_OD, - .delay_ms = 2, - }, - { - .gpio = GPIO_EC_AP_PCH_PWROK_OD, - }, - { - .gpio = GPIO_EC_AP_SYS_PWROK, - }, -}; -const int pwrok_signal_assert_count = ARRAY_SIZE(pwrok_signal_assert_list); - -const struct intel_x86_pwrok_signal pwrok_signal_deassert_list[] = { - /* No delays needed during S0 exit */ - { - .gpio = GPIO_EC_AP_VCCST_PWRGD_OD, - }, - { - .gpio = GPIO_EC_AP_PCH_PWROK_OD, - }, - { - .gpio = GPIO_EC_AP_SYS_PWROK, - }, - /* Turn off the VCCIN rail last */ - { - .gpio = GPIO_ALL_SYS_PWRGD, - }, -}; -const int pwrok_signal_deassert_count = ARRAY_SIZE(pwrok_signal_deassert_list); - - -/* - * Dedede does not use hibernate wake pins, but the super low power "Z-state" - * instead in which the EC is powered off entirely. Power will be restored to - * the EC once one of the wake up events occurs. These events are ACOK, lid - * open, and a power button press. - */ -const enum gpio_signal hibernate_wake_pins[] = {}; -const int hibernate_wake_pins_used; - -__override void board_after_rsmrst(int rsmrst) -{ - /* - * b:148688874: If RSMRST# is de-asserted, enable the pull-up on - * PG_PP1050_ST_OD. It won't be enabled prior to this signal going high - * because the load switch for PP1050_ST cannot pull the PG low. Once - * it's asserted, disable the pull up so we don't inidicate that the - * power is good before the rail is actually ready. - */ - int flags = rsmrst ? GPIO_PULL_UP : 0; - - flags |= GPIO_INT_BOTH; - - gpio_set_flags(GPIO_PG_PP1050_ST_OD, flags); -} - -/* - * Dedede does not have a GPIO indicating ACOK, therefore the charger or TCPC - * can call this function once it detects a VBUS presence change with which we - * can trigger the HOOK_AC_CHANGE hook. - */ -__override void board_check_extpower(void) -{ - static int last_extpower_present; - int extpower_present = extpower_is_present(); - - if (last_extpower_present ^ extpower_present) - extpower_handle_update(extpower_present); - - last_extpower_present = extpower_present; -} - -uint32_t pp3300_a_pgood; -__override int intel_x86_get_pg_ec_dsw_pwrok(void) -{ - /* - * The PP3300_A rail is an input to generate DPWROK. Assuming that - * power is good if voltage is at least 80% of nominal level. We cannot - * read the ADC values during an interrupt, therefore, this power good - * value is updated via ADC threshold interrupts. - */ - return pp3300_a_pgood; -} - -/* Store away PP300_A good status before sysjumps */ -#define BASEBOARD_SYSJUMP_TAG 0x4242 /* BB */ -#define BASEBOARD_HOOK_VERSION 1 - -static void pp3300_a_pgood_preserve(void) -{ - system_add_jump_tag(BASEBOARD_SYSJUMP_TAG, BASEBOARD_HOOK_VERSION, - sizeof(pp3300_a_pgood), &pp3300_a_pgood); -} -DECLARE_HOOK(HOOK_SYSJUMP, pp3300_a_pgood_preserve, HOOK_PRIO_DEFAULT); - -static void baseboard_prepare_power_signals(void) -{ - const int *stored; - int version, size; - - stored = (const int *)system_get_jump_tag(BASEBOARD_SYSJUMP_TAG, - &version, &size); - if (stored && (version == BASEBOARD_HOOK_VERSION) && - (size == sizeof(pp3300_a_pgood))) - /* Valid PP3300 status found, restore before CHIPSET init */ - pp3300_a_pgood = *stored; - - /* Restore pull-up on PG_PP1050_ST_OD */ - if (system_jumped_to_this_image() && - gpio_get_level(GPIO_RSMRST_L_PGOOD)) - board_after_rsmrst(1); -} -DECLARE_HOOK(HOOK_INIT, baseboard_prepare_power_signals, HOOK_PRIO_FIRST); - -__override int intel_x86_get_pg_ec_all_sys_pwrgd(void) -{ - /* - * SLP_S3_L is a qualifying input signal to ALL_SYS_PWRGD logic. - * So ensure ALL_SYS_PWRGD remains LOW during SLP_S3_L assertion. - */ - if (!gpio_get_level(GPIO_SLP_S3_L)) - return 0; - /* - * ALL_SYS_PWRGD is an AND of DRAM PGOOD, VCCST PGOOD, and VCCIO_EXT - * PGOOD. - */ - return gpio_get_level(GPIO_PG_PP1050_ST_OD) && - gpio_get_level(GPIO_PG_DRAM_OD) && - gpio_get_level(GPIO_PG_VCCIO_EXT_OD); -} - -__override int power_signal_get_level(enum gpio_signal signal) -{ - if (signal == GPIO_PG_EC_DSW_PWROK) - return intel_x86_get_pg_ec_dsw_pwrok(); - - if (signal == GPIO_PG_EC_ALL_SYS_PWRGD) - return intel_x86_get_pg_ec_all_sys_pwrgd(); - - if (IS_ENABLED(CONFIG_HOSTCMD_ESPI)) { - /* Check signal is from GPIOs or VWs */ - if (espi_signal_is_vw(signal)) - return espi_vw_get_wire(signal); - } - return gpio_get_level(signal); - -} - -void baseboard_all_sys_pgood_interrupt(enum gpio_signal signal) -{ - /* - * We need to deassert ALL_SYS_PGOOD within 200us of SLP_S3_L asserting. - * that is why we do this here instead of waiting for the chipset - * driver to. - * Early protos do not pull VCCST_PWRGD below Vil in hardware logic, - * so we need to do the same for this signal. - * Pull EN_VCCIO_EXT to LOW, which ensures VCCST_PWRGD remains LOW during - * SLP_S3_L assertion. - */ - if (!gpio_get_level(GPIO_SLP_S3_L)) { - gpio_set_level(GPIO_ALL_SYS_PWRGD, 0); - gpio_set_level(GPIO_EN_VCCIO_EXT, 0); - gpio_set_level(GPIO_EC_AP_VCCST_PWRGD_OD, 0); - gpio_set_level(GPIO_EC_AP_PCH_PWROK_OD, 0); - } - /* Now chain off to the normal power signal interrupt handler. */ - power_signal_interrupt(signal); -} - -void baseboard_chipset_startup(void) -{ -#ifdef CONFIG_PWM_KBLIGHT - /* Allow keyboard backlight to be enabled */ - gpio_set_level(GPIO_EN_KB_BL, 1); -#endif -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, baseboard_chipset_startup, - HOOK_PRIO_DEFAULT); - -void baseboard_chipset_shutdown(void) -{ -#ifdef CONFIG_PWM_KBLIGHT - /* Turn off the keyboard backlight if it's on. */ - gpio_set_level(GPIO_EN_KB_BL, 0); -#endif -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, baseboard_chipset_shutdown, - HOOK_PRIO_DEFAULT); - -void board_hibernate_late(void) -{ - volatile uint32_t busy = 0; - - /* Disable any pull-ups on C0 and C1 interrupt lines */ - gpio_set_flags(GPIO_USB_C0_INT_ODL, GPIO_INPUT); - #if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - gpio_set_flags(GPIO_USB_C1_INT_ODL, GPIO_INPUT); - #endif - /* - * Turn on the Z state. This will not return as it will cut power to - * the EC. - */ - gpio_set_level(GPIO_EN_SLP_Z, 1); - - /* - * Interrupts are disabled at this point, so busy-loop to consume some - * time (something on the order of at least 1 second, depending on EC - * chip being used) - */ - while (busy < 100000) - busy++; - - /* - * Still awake despite turning on zombie state? Reset with AP off is - * the best we can do in this situation. - */ - system_reset(SYSTEM_RESET_LEAVE_AP_OFF); - - /* Await our reset */ - while (1) - ; -} - -int board_is_i2c_port_powered(int port) -{ - if (port != I2C_PORT_SENSOR) - return 1; - - /* Sensor rails are off in S5/G3 */ - return chipset_in_state(CHIPSET_STATE_ANY_OFF) ? 0 : 1; -} - -int extpower_is_present(void) -{ - int port; - int rv; - bool acok; - enum ec_error_list (*check_acok)(int port, bool *acok); - - if (IS_ENABLED(CONFIG_CHARGER_RAA489000)) - check_acok = raa489000_is_acok; - else if (IS_ENABLED(CONFIG_CHARGER_SM5803)) - check_acok = sm5803_is_acok; - - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - rv = check_acok(port, &acok); - if ((rv == EC_SUCCESS) && acok) - return 1; - } - - return 0; -} - -__override uint32_t board_override_feature_flags0(uint32_t flags0) -{ - /* - * Remove keyboard backlight feature for devices that don't support it. - */ - if (get_cbi_fw_config_kblight() == KB_BL_ABSENT) - return (flags0 & ~EC_FEATURE_MASK_0(EC_FEATURE_PWM_KEYB)); - else - return flags0; -} diff --git a/baseboard/dedede/baseboard.h b/baseboard/dedede/baseboard.h deleted file mode 100644 index a8a0ed3ff2..0000000000 --- a/baseboard/dedede/baseboard.h +++ /dev/null @@ -1,269 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Dedede board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) - -/* - * Variant EC defines. Pick one: - * VARIANT_DEDEDE_EC_NPCX796FC - */ -#if defined(VARIANT_DEDEDE_EC_NPCX796FC) || \ - defined(VARIANT_KEEBY_EC_NPCX797FC) - /* NPCX7 config */ - #define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ - #define NPCX_TACH_SEL2 0 /* No tach. */ - - /* Internal SPI flash on NPCX7 */ - #define CONFIG_FLASH_SIZE_BYTES (512 * 1024) - #define CONFIG_SPI_FLASH_REGS - #define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ -#elif defined(VARIANT_DEDEDE_EC_IT8320) || \ - defined(VARIANT_KEEBY_EC_IT8320) - /* IT83XX config */ - #define CONFIG_IT83XX_VCC_1P8V - /* I2C Bus Configuration */ - #define I2C_PORT_EEPROM IT83XX_I2C_CH_A - #define I2C_PORT_BATTERY IT83XX_I2C_CH_B - #define I2C_PORT_SENSOR IT83XX_I2C_CH_C - #define I2C_PORT_SUB_USB_C1 IT83XX_I2C_CH_E - #define I2C_PORT_USB_C0 IT83XX_I2C_CH_F - - #define I2C_ADDR_EEPROM_FLAGS 0x50 - - #define CONFIG_ADC_VOLTAGE_COMPARATOR /* ITE ADC thresholds */ - - #undef CONFIG_UART_TX_BUF_SIZE /* UART */ - #define CONFIG_UART_TX_BUF_SIZE 4096 -#else -#error "Must define a VARIANT_[DEDEDE|KEEBY]_EC!" -#endif - -/* - * The key difference between Keeby and Dedede is that Keeby variants don't have - * a connection to H1 and therefore do not use EFS2. - */ -#if defined(VARIANT_KEEBY_EC_NPCX797FC) || defined(VARIANT_KEEBY_EC_IT8320) -#define KEEBY_VARIANT 1 -#else -#define KEEBY_VARIANT 0 -#endif - -/* - * Remapping of schematic GPIO names to common GPIO names expected (hardcoded) - * in the EC code base. - */ -#define GPIO_CPU_PROCHOT GPIO_EC_PROCHOT_ODL -#define GPIO_EC_INT_L GPIO_EC_AP_MKBP_INT_L -#define GPIO_EN_PP5000 GPIO_EN_PP5000_U -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV -#if !KEEBY_VARIANT -#define GPIO_PACKET_MODE_EN GPIO_ECH1_PACKET_MODE -#endif -#define GPIO_PCH_DSW_PWROK GPIO_EC_AP_DPWROK -#define GPIO_PCH_PWRBTN_L GPIO_EC_AP_PWR_BTN_ODL -#define GPIO_PCH_RSMRST_L GPIO_EC_AP_RSMRST_L -#define GPIO_PCH_RTCRST GPIO_EC_AP_RTCRST -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S0_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S4_L GPIO_SLP_S4_L -#define GPIO_PCH_WAKE_L GPIO_EC_AP_WAKE_ODL -#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_PWRGD_L -#if KEEBY_VARIANT -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#else -#define GPIO_POWER_BUTTON_L GPIO_H1_EC_PWR_BTN_ODL -#endif -#define GPIO_RSMRST_L_PGOOD GPIO_RSMRST_PWRGD_L -#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL -#define GPIO_USB_C0_DP_HPD GPIO_EC_AP_USB_C0_HPD -#define GPIO_USB_C1_DP_HPD GPIO_EC_AP_USB_C1_HDMI_HPD -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL -#define GPIO_WP GPIO_EC_WP_OD -#define GMR_TABLET_MODE_GPIO_L GPIO_LID_360_L - -/* Common EC defines */ - -/* Work around double CR50 reset by waiting in initial power on. */ -#if !KEEBY_VARIANT -#define CONFIG_BOARD_RESET_AFTER_POWER_ON -#endif - -/* Optional console commands */ -#define CONFIG_CMD_CHARGER_DUMP - -/* Enable AP Reset command for TPM with old firmware version to detect it. */ -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_HOSTCMD_AP_RESET - -/* Enable i2ctrace command */ -#define CONFIG_I2C_DEBUG - -/* Assert CCD when a debug device is connected */ -#if !KEEBY_VARIANT -#define CONFIG_ASSERT_CCD_MODE_ON_DTS_CONNECT -#endif - -/* EC Modules */ -#define CONFIG_ADC -#define CONFIG_CRC8 -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_EVENTS -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_BUS_MAY_BE_UNPOWERED -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_POWER_PP5000_CONTROL -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#if !KEEBY_VARIANT -#define CONFIG_VBOOT_EFS2 -#endif - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATTERY_PRES_ODL -#define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART - -/* Buttons / Switches */ -#define CONFIG_SWITCH -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_WP_ACTIVE_HIGH - -/* CBI */ -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI -#if KEEBY_VARIANT -#define CONFIG_EEPROM_CBI_WP -#endif - -/* Charger */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 256 -#define CONFIG_USB_CHARGER -#define CONFIG_TRICKLE_CHARGING - -/* Keyboard */ -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_MKBP_INPUT_DEVICES - -/* Backlight */ -#define CONFIG_BACKLIGHT_LID -#define GPIO_ENABLE_BACKLIGHT GPIO_EN_BL_OD - -/* LED */ -#define CONFIG_LED_COMMON - -/* Sensors */ -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO_AND_HOST_EVENT - -/* SoC */ -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_CHIPSET_JASPERLAKE -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW - -/* USB Type-C */ -#define CONFIG_USB_MUX_PI3USB31532 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Temp Sensor */ -#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A -#define CONFIG_TEMP_SENSOR_FIRST_READ_DELAY_MS 500 - -/* USB PD */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DP_HPD_GPIO -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -/* #define CONFIG_USB_PD_VBUS_DETECT_CHARGER */ -#define CONFIG_USB_PD_VBUS_MEASURE_CHARGER -#define CONFIG_USB_PD_DECODE_SOP -#if KEEBY_VARIANT -#define CONFIG_USB_PID 0x5059 -#else -#define CONFIG_USB_PID 0x5042 -#endif -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_HOSTCMD_PD_CONTROL - -#if !KEEBY_VARIANT -/* UART COMMAND */ -#define CONFIG_CMD_CHARGEN -#endif - -/* Define typical operating power and max power. */ -#define PD_MAX_VOLTAGE_MV 20000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_POWER_MW 45000 -#define PD_OPERATING_POWER_MW 15000 - -/* TODO(b:147314141): Verify these timings */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -#ifndef __ASSEMBLER__ - -#include "common.h" -#include "gpio_signal.h" - -/* Common enums */ -#if defined(VARIANT_DEDEDE_EC_NPCX796FC) -#elif defined(VARIANT_DEDEDE_EC_IT8320) || \ - defined(VARIANT_KEEBY_EC_IT8320) - enum board_vcmp { - VCMP_SNS_PP3300_LOW, - VCMP_SNS_PP3300_HIGH, - VCMP_COUNT - }; -#endif - -/* Interrupt handler for signals that are used to generate ALL_SYS_PGOOD. */ -void baseboard_all_sys_pgood_interrupt(enum gpio_signal signal); - -/* Reset all TCPCs */ -void board_reset_pd_mcu(void); - -/* - * Bit to indicate if the PP3000_A rail's power is good. Will be updated by ADC - * interrupt. - */ -extern uint32_t pp3300_a_pgood; - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/dedede/build.mk b/baseboard/dedede/build.mk deleted file mode 100644 index 6d7452081e..0000000000 --- a/baseboard/dedede/build.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o cbi_fw_config.o -baseboard-$(VARIANT_DEDEDE_EC_NPCX796FC)+=variant_ec_npcx796fc.o -baseboard-$(VARIANT_KEEBY_EC_NPCX797FC)+=variant_ec_npcx796fc.o -baseboard-$(VARIANT_DEDEDE_EC_IT8320)+=variant_ec_it8320.o -baseboard-$(VARIANT_KEEBY_EC_IT8320)+=variant_ec_it8320.o diff --git a/baseboard/dedede/cbi_fw_config.c b/baseboard/dedede/cbi_fw_config.c deleted file mode 100644 index 27d23733de..0000000000 --- a/baseboard/dedede/cbi_fw_config.c +++ /dev/null @@ -1,64 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "cbi_fw_config.h" -#include "common.h" -#include "console.h" -#include "cros_board_info.h" -#include "hooks.h" - -/**************************************************************************** - * Dedede CBI FW Configuration - */ - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ##args) - -/* Cache FW_CONFIG on init since we don't expect it to change in runtime */ -static uint32_t cached_fw_config; - -static void cbi_fw_config_init(void) -{ - if (cbi_get_fw_config(&cached_fw_config) != EC_SUCCESS) - /* Default to 0 when CBI isn't populated */ - cached_fw_config = 0; - - CPRINTS("FW_CONFIG: 0x%04X", cached_fw_config); -} -DECLARE_HOOK(HOOK_INIT, cbi_fw_config_init, HOOK_PRIO_FIRST); - -enum fw_config_db get_cbi_fw_config_db(void) -{ - return ((cached_fw_config & FW_CONFIG_DB_MASK) >> FW_CONFIG_DB_OFFSET); -} - -enum fw_config_kblight_type get_cbi_fw_config_kblight(void) -{ - return ((cached_fw_config & FW_CONFIG_KB_BL_MASK) - >> FW_CONFIG_KB_BL_OFFSET); -} - -enum fw_config_tablet_mode_type get_cbi_fw_config_tablet_mode(void) -{ - return ((cached_fw_config & FW_CONFIG_TABLET_MODE_MASK) - >> FW_CONFIG_TABLET_MODE_OFFSET); -} - -int get_cbi_fw_config_keyboard(void) -{ - return ((cached_fw_config & FW_CONFIG_KB_LAYOUT_MASK) - >> FW_CONFIG_KB_LAYOUT_OFFSET); -} - -enum fw_config_numeric_pad_type get_cbi_fw_config_numeric_pad(void) -{ - return ((cached_fw_config & FW_CONFIG_KB_NUMPAD_MASK) - >> FW_CONFIG_KB_NUMPAD_OFFSET); -} - -enum fw_config_hdmi_type get_cbi_fw_config_hdmi(void) -{ - return ((cached_fw_config & FW_CONFIG_HDMI_MASK) - >> FW_CONFIG_HDMI_OFFSET); -} diff --git a/baseboard/dedede/cbi_fw_config.h b/baseboard/dedede/cbi_fw_config.h deleted file mode 100644 index c9782522fa..0000000000 --- a/baseboard/dedede/cbi_fw_config.h +++ /dev/null @@ -1,81 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef _DEDEDE_CBI_FW_CONFIG__H_ -#define _DEDEDE_CBI_FW_CONFIG__H_ - -/**************************************************************************** - * Dedede CBI FW Configuration - */ - -/* - * Daughter Board (Bits 0-3) - */ -enum fw_config_db { - DB_NONE, - DB_2C, - DB_1C_LTE, - DB_1A_HDMI, - DB_1C_1A, - DB_LTE_HDMI, - DB_1C_1A_LTE, - DB_1C, - DB_1A_HDMI_LTE, -}; -#define FW_CONFIG_DB_OFFSET 0 -#define FW_CONFIG_DB_MASK GENMASK(3, 0) - -/* - * Keyboard backlight (1 bit) - */ -enum fw_config_kblight_type { - KB_BL_ABSENT = 0, - KB_BL_PRESENT = 1, -}; -#define FW_CONFIG_KB_BL_OFFSET 8 -#define FW_CONFIG_KB_BL_MASK GENMASK(8, 8) - -/* - * Keyboard numeric pad (1 bit) - */ -enum fw_config_numeric_pad_type { - NUMERIC_PAD_ABSENT = 0, - NUMERIC_PAD_PRESENT = 1, -}; -#define FW_CONFIG_KB_NUMPAD_OFFSET 9 -#define FW_CONFIG_KB_NUMPAD_MASK GENMASK(9, 9) - -/* - * Tablet Mode (1 bit) - */ -enum fw_config_tablet_mode_type { - TABLET_MODE_ABSENT = 0, - TABLET_MODE_PRESENT = 1, -}; -#define FW_CONFIG_TABLET_MODE_OFFSET 10 -#define FW_CONFIG_TABLET_MODE_MASK GENMASK(10, 10) - -#define FW_CONFIG_KB_LAYOUT_OFFSET 12 -#define FW_CONFIG_KB_LAYOUT_MASK GENMASK(13, 12) - -/* - * Hdmi (1 bit) - */ -enum fw_config_hdmi_type { - HDMI_ABSENT = 0, - HDMI_PRESENT = 1, -}; -#define FW_CONFIG_HDMI_OFFSET 17 -#define FW_CONFIG_HDMI_MASK GENMASK(17, 17) - -enum fw_config_db get_cbi_fw_config_db(void); -enum fw_config_kblight_type get_cbi_fw_config_kblight(void); -enum fw_config_tablet_mode_type get_cbi_fw_config_tablet_mode(void); -enum fw_config_numeric_pad_type get_cbi_fw_config_numeric_pad(void); -enum fw_config_hdmi_type get_cbi_fw_config_hdmi(void); - -int get_cbi_fw_config_keyboard(void); - -#endif /* _DEDEDE_CBI_FW_CONFIG__H_ */ diff --git a/baseboard/dedede/variant_ec_it8320.c b/baseboard/dedede/variant_ec_it8320.c deleted file mode 100644 index 59f07da086..0000000000 --- a/baseboard/dedede/variant_ec_it8320.c +++ /dev/null @@ -1,107 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common code for VARIANT_[DEDEDE|KEEBY]_IT8320 configuration */ - -#include "adc_chip.h" -#include "atomic.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "power.h" -#include "registers.h" - -#define CPRINTUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) - -static void pp3300_a_pgood_low(void) -{ - atomic_clear_bits(&pp3300_a_pgood, 1); - - /* Disable low interrupt while asserted */ - vcmp_enable(VCMP_SNS_PP3300_LOW, 0); - - /* Enable high interrupt */ - vcmp_enable(VCMP_SNS_PP3300_HIGH, 1); - - /* - * Call power_signal_interrupt() with a fake GPIO in order for the - * chipset task to pick up the change in power sequencing signals. - */ - power_signal_interrupt(GPIO_PG_EC_DSW_PWROK); -} - -static void pp3300_a_pgood_high(void) -{ - atomic_or(&pp3300_a_pgood, 1); - - /* Disable high interrupt while asserted */ - vcmp_enable(VCMP_SNS_PP3300_HIGH, 0); - - /* Enable low interrupt */ - vcmp_enable(VCMP_SNS_PP3300_LOW, 1); - - /* - * Call power_signal_interrupt() with a fake GPIO in order for the - * chipset task to pick up the change in power sequencing signals. - */ - power_signal_interrupt(GPIO_PG_EC_DSW_PWROK); -} - -const struct vcmp_t vcmp_list[] = { - [VCMP_SNS_PP3300_LOW] = { - .name = "VCMP_SNS_PP3300_LOW", - .threshold = 600, /* mV */ - .flag = LESS_EQUAL_THRESHOLD, - .vcmp_thresh_cb = &pp3300_a_pgood_low, - .scan_period = VCMP_SCAN_PERIOD_600US, - .adc_ch = CHIP_ADC_CH0, - }, - [VCMP_SNS_PP3300_HIGH] = { - .name = "VCMP_SNS_PP3300_HIGH", - .threshold = 2700, /* mV */ - .flag = GREATER_THRESHOLD, - .vcmp_thresh_cb = &pp3300_a_pgood_high, - .scan_period = VCMP_SCAN_PERIOD_600US, - .adc_ch = CHIP_ADC_CH0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(vcmp_list) <= CHIP_VCMP_COUNT); -BUILD_ASSERT(ARRAY_SIZE(vcmp_list) == VCMP_COUNT); - -/* I2C Ports */ -const struct i2c_port_t i2c_ports[] = { - { - "eeprom", I2C_PORT_EEPROM, 400, GPIO_EC_I2C_EEPROM_SCL, - GPIO_EC_I2C_EEPROM_SDA - }, - - { - "battery", I2C_PORT_BATTERY, 100, GPIO_EC_I2C_BATTERY_SCL, - GPIO_EC_I2C_BATTERY_SDA - }, -#ifdef HAS_TASK_MOTIONSENSE - { - "sensor", I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL, - GPIO_EC_I2C_SENSOR_SDA - }, -#endif - -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - { - "sub_usbc1", I2C_PORT_SUB_USB_C1, 1000, - GPIO_EC_I2C_SUB_USB_C1_SCL, GPIO_EC_I2C_SUB_USB_C1_SDA - }, -#endif - - { - "usbc0", I2C_PORT_USB_C0, 1000, GPIO_EC_I2C_USB_C0_SCL, - GPIO_EC_I2C_USB_C0_SDA - }, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - diff --git a/baseboard/dedede/variant_ec_npcx796fc.c b/baseboard/dedede/variant_ec_npcx796fc.c deleted file mode 100644 index 6d9dfb368a..0000000000 --- a/baseboard/dedede/variant_ec_npcx796fc.c +++ /dev/null @@ -1,191 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common code for VARIANT_[DEDEDE|KEEBY]_NPCX79[6/7]FC configuration */ - -#include "adc.h" -#include "atomic.h" -#include "chipset.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "lid_switch.h" -#include "power.h" -#include "registers.h" -#include "task.h" -#include "timer.h" - -/* Console output macros */ -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) - -void pp3300_a_pgood_high(void) -{ - atomic_or(&pp3300_a_pgood, 1); - - /* Disable this interrupt while it's asserted. */ - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH1, 0); - /* Enable the voltage low interrupt. */ - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH2, 1); - - /* - * Call power_signal_interrupt() with a fake GPIO in order for the - * chipset task to pick up the change in power sequencing signals. - */ - power_signal_interrupt(GPIO_PG_EC_DSW_PWROK); -} - -void pp3300_a_pgood_low(void) -{ - atomic_clear_bits(&pp3300_a_pgood, 1); - - /* Disable this interrupt while it's asserted. */ - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH2, 0); - /* Enable the voltage high interrupt. */ - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH1, 1); - - /* - * Call power_signal_interrupt() with a fake GPIO in order for the - * chipset task to pick up the change in power sequencing signals. - */ - power_signal_interrupt(GPIO_PG_EC_DSW_PWROK); -} - -const struct npcx_adc_thresh_t adc_pp3300_a_pgood_high = { - .adc_ch = ADC_VSNS_PP3300_A, - .adc_thresh_cb = pp3300_a_pgood_high, - .thresh_assert = 2700, -}; - -const struct npcx_adc_thresh_t adc_pp3300_a_pgood_low = { - .adc_ch = ADC_VSNS_PP3300_A, - .adc_thresh_cb = pp3300_a_pgood_low, - .lower_or_higher = 1, - .thresh_assert = 600, -}; - -static void set_up_adc_irqs(void) -{ - /* Set interrupt thresholds for the ADC. */ - npcx_adc_register_thresh_irq(NPCX_ADC_THRESH1, - &adc_pp3300_a_pgood_high); - npcx_adc_register_thresh_irq(NPCX_ADC_THRESH2, &adc_pp3300_a_pgood_low); - npcx_set_adc_repetitive(adc_channels[ADC_VSNS_PP3300_A].input_ch, 1); - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH1, 1); - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH2, 1); -} -DECLARE_HOOK(HOOK_INIT, set_up_adc_irqs, HOOK_PRIO_INIT_ADC+1); - -static void disable_adc_irqs_deferred(void) -{ - CPRINTS("%s", __func__); - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH1, 0); - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH2, 0); - npcx_set_adc_repetitive(adc_channels[ADC_VSNS_PP3300_A].input_ch, 0); - - /* - * If we're already in G3, PP3300_A is already off. Since the ADC - * interrupts were already disabled, this data is stale. Therefore, - * force the PGOOD value to 0 and have the chipset task re-evaluate. - * This should help prevent leakage. - */ - if (chipset_in_state(CHIPSET_STATE_HARD_OFF)) - pp3300_a_pgood = 0; - power_signal_interrupt(GPIO_PG_EC_DSW_PWROK); -} -DECLARE_DEFERRED(disable_adc_irqs_deferred); - -/* - * The ADC interrupts are only needed for booting up. The assumption is that - * the PP3300_A rail will not go down during runtime. Therefore, we'll disable - * the ADC interrupts shortly after booting up and also after shutting down. - */ -static void disable_adc_irqs(void) -{ - int delay = 200 * MSEC; - - /* - * The EC stays in S5 for about 10s after shutting before heading down - * to G3. Therefore, we'll postpone disabling the ADC IRQs until after - * this occurs. - */ - if (chipset_in_or_transitioning_to_state(CHIPSET_STATE_ANY_OFF)) - delay = 15 * SECOND; - hook_call_deferred(&disable_adc_irqs_deferred_data, delay); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, disable_adc_irqs, HOOK_PRIO_DEFAULT); -DECLARE_HOOK(HOOK_CHIPSET_RESUME, disable_adc_irqs, HOOK_PRIO_DEFAULT); - -/* - * We only need the ADC interrupts functional when powering up. Therefore, only - * enable them from our wake sources. These will be the power button, or lid - * open. Below is a summary of the ADC interrupt action per power state and - * wake source. - * - * Powering up to S0: ADC interrupts will be disabled after ~200ms. - * S0ix/S3: No action as ADC interrupts are already disabled if suspending. - * Powering down to S5/G3: ADC interrupts will be disabled after ~15s. - * Powering up from S5/G3: ADC interrupts will be enabled. They will be - * disabled ~200ms after passing thru S3. - * Power button press: If the system is in S5/G3, ADC interrupts will be - * enabled. - * Lid open: ADC interrupts will be enabled. - */ -static void enable_adc_irqs(void) -{ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) { - CPRINTS("%s", __func__); - hook_call_deferred(&disable_adc_irqs_deferred_data, -1); - npcx_set_adc_repetitive(adc_channels[ADC_VSNS_PP3300_A].input_ch, - 1); - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH1, 1); - npcx_adc_thresh_int_enable(NPCX_ADC_THRESH2, 1); - } -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, enable_adc_irqs, HOOK_PRIO_DEFAULT); -DECLARE_HOOK(HOOK_POWER_BUTTON_CHANGE, enable_adc_irqs, HOOK_PRIO_DEFAULT); - -static void enable_adc_irqs_via_lid(void) -{ - if (lid_is_open()) - enable_adc_irqs(); -} -DECLARE_HOOK(HOOK_LID_CHANGE, enable_adc_irqs_via_lid, HOOK_PRIO_DEFAULT); - -/* I2C Ports */ -__attribute__((weak)) const struct i2c_port_t i2c_ports[] = { - { - "eeprom", I2C_PORT_EEPROM, 1000, GPIO_EC_I2C_EEPROM_SCL, - GPIO_EC_I2C_EEPROM_SDA - }, - - { - "battery", I2C_PORT_BATTERY, 100, GPIO_EC_I2C_BATTERY_SCL, - GPIO_EC_I2C_BATTERY_SDA - }, - -#ifdef HAS_TASK_MOTIONSENSE - { - "sensor", I2C_PORT_SENSOR, 400, GPIO_EC_I2C_SENSOR_SCL, - GPIO_EC_I2C_SENSOR_SDA - }, -#endif - - { - "usbc0", I2C_PORT_USB_C0, 1000, GPIO_EC_I2C_USB_C0_SCL, - GPIO_EC_I2C_USB_C0_SDA - }, -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - { - "sub_usbc1", I2C_PORT_SUB_USB_C1, 1000, - GPIO_EC_I2C_SUB_USB_C1_SCL, GPIO_EC_I2C_SUB_USB_C1_SDA - }, -#endif -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - diff --git a/baseboard/goroh/baseboard.c b/baseboard/goroh/baseboard.c deleted file mode 100644 index 933fdc0eff..0000000000 --- a/baseboard/goroh/baseboard.c +++ /dev/null @@ -1,572 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Goroh baseboard-specific configuration */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charger.h" -#include "charger.h" -#include "charge_state.h" -#include "charge_state_v2.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/accel_lis2dw12.h" -#include "driver/als_tcs3400.h" -#include "driver/bc12/mt6360.h" -#include "driver/bc12/pi3usb9201.h" -#include "driver/charger/isl923x.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/syv682x.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/temp_sensor/thermistor.h" -#include "driver/usb_mux/it5205.h" -#include "driver/usb_mux/ps8743.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power_button.h" -#include "power.h" -#include "power.h" -#include "regulator.h" -#include "spi.h" -#include "switch.h" -#include "tablet_mode.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" -#include "usb_charge.h" -#include "usbc_ppc.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" - -static void bc12_interrupt(enum gpio_signal signal); -static void ppc_interrupt(enum gpio_signal signal); -static void x_ec_interrupt(enum gpio_signal signal); - -#include "gpio_list.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) - -static enum board_sub_board board_get_sub_board(void); - -/* Wake-up pins for hibernate */ -enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, -}; -int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -__override void board_hibernate_late(void) -{ - /* - * Turn off PP5000_A. Required for devices without Z-state. - * Don't care for devices with Z-state. - */ - gpio_set_level(GPIO_EN_PP5000_A, 0); - - /* - * GPIO_EN_SLP_Z not implemented in rev0/1, - * fallback to usual hibernate process. - */ - if (IS_ENABLED(BOARD_GOROH) && board_get_version() <= 1) - return; - - isl9238c_hibernate(CHARGER_SOLO); - - gpio_set_level(GPIO_EN_SLP_Z, 1); - - /* should not reach here */ - __builtin_unreachable(); -} - -/* Detect subboard */ -static void board_tcpc_init(void) -{ - gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL); - /* C1: GPIO_USB_C1_PPC_INT_ODL & HDMI: GPIO_PS185_EC_DP_HPD */ - gpio_enable_interrupt(GPIO_X_EC_GPIO2); - - /* If this is not a Type-C subboard, disable the task. */ - if (board_get_sub_board() != SUB_BOARD_TYPEC) - task_disable_task(TASK_ID_PD_C1); -} -/* Must be done after I2C and subboard */ -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1); - -/* PPC */ -struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .i2c_port = I2C_PORT_PPC0, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, - .frs_en = GPIO_USB_C0_FRS_EN, - }, - { - .i2c_port = I2C_PORT_PPC1, - .i2c_addr_flags = SYV682X_ADDR0_FLAGS, - .drv = &syv682x_drv, - .frs_en = GPIO_USB_C1_FRS_EN, - }, -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/* BC12 */ -const struct mt6360_config_t mt6360_config = { - .i2c_port = 0, - .i2c_addr_flags = MT6360_PMU_I2C_ADDR_FLAGS, -}; - -const struct pi3usb9201_config_t - pi3usb9201_bc12_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - /* [0]: unused */ - [1] = { - .i2c_port = 4, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - } -}; - -struct bc12_config bc12_ports[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { .drv = &mt6360_drv }, - { .drv = &pi3usb9201_drv }, -}; - -static void bc12_interrupt(enum gpio_signal signal) -{ - if (signal == GPIO_USB_C0_BC12_INT_ODL) - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); - else - task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12); -} - -static void board_sub_bc12_init(void) -{ - if (board_get_sub_board() == SUB_BOARD_TYPEC) - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_L); - else - /* If this is not a Type-C subboard, disable the task. */ - task_disable_task(TASK_ID_USB_CHG_P1); -} -/* Must be done after I2C and subboard */ -DECLARE_HOOK(HOOK_INIT, board_sub_bc12_init, HOOK_PRIO_INIT_I2C + 1); - -static void ppc_interrupt(enum gpio_signal signal) -{ - if (signal == GPIO_USB_C0_PPC_INT_ODL) - /* C0: PPC interrupt */ - syv682x_interrupt(0); -} - -/* Sub-board */ - -static enum board_sub_board board_get_sub_board(void) -{ - static enum board_sub_board sub = SUB_BOARD_NONE; - - if (sub != SUB_BOARD_NONE) - return sub; - - /* HDMI board has external pull high. */ - if (gpio_get_level(GPIO_EC_X_GPIO3)) { - sub = SUB_BOARD_HDMI; - /* Only has 1 PPC with HDMI subboard */ - ppc_cnt = 1; - /* EC_X_GPIO1 */ - gpio_set_flags(GPIO_EN_HDMI_PWR, GPIO_OUT_HIGH); - /* X_EC_GPIO2 */ - gpio_set_flags(GPIO_PS185_EC_DP_HPD, GPIO_INT_BOTH); - /* EC_X_GPIO3 */ - gpio_set_flags(GPIO_PS185_PWRDN_ODL, GPIO_ODR_HIGH); - } else { - sub = SUB_BOARD_TYPEC; - /* EC_X_GPIO1 */ - gpio_set_flags(GPIO_USB_C1_FRS_EN, GPIO_OUT_LOW); - /* X_EC_GPIO2 */ - gpio_set_flags(GPIO_USB_C1_PPC_INT_ODL, - GPIO_INT_BOTH | GPIO_PULL_UP); - /* EC_X_GPIO3 */ - gpio_set_flags(GPIO_USB_C1_DP_IN_HPD, GPIO_OUT_LOW); - } - - CPRINTS("Detect %s SUB", sub == SUB_BOARD_HDMI ? "HDMI" : "TYPEC"); - return sub; -} - -static void sub_board_init(void) -{ - board_get_sub_board(); -} -DECLARE_HOOK(HOOK_INIT, sub_board_init, HOOK_PRIO_INIT_I2C - 1); - -__override uint8_t board_get_usb_pd_port_count(void) -{ - if (board_get_sub_board() == SUB_BOARD_TYPEC) - return CONFIG_USB_PD_PORT_MAX_COUNT; - else - return CONFIG_USB_PD_PORT_MAX_COUNT - 1; -} - -/* Called on AP S3 -> S0 transition */ -static void board_chipset_resume(void) -{ - gpio_set_level(GPIO_EC_BL_EN_OD, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S3 transition */ -static void board_chipset_suspend(void) -{ - gpio_set_level(GPIO_EC_BL_EN_OD, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); - -/* USB-A */ -const int usb_port_enable[] = { - GPIO_EN_PP5000_USB_A0_VBUS, -}; -BUILD_ASSERT(ARRAY_SIZE(usb_port_enable) == USB_PORT_COUNT); - -/* USB Mux */ - -void board_usb_mux_init(void) -{ - if (board_get_sub_board() == SUB_BOARD_TYPEC) - ps8743_tune_usb_eq(&usb_muxes[1], - PS8743_USB_EQ_TX_12_8_DB, - PS8743_USB_EQ_RX_12_8_DB); -} -DECLARE_HOOK(HOOK_INIT, board_usb_mux_init, HOOK_PRIO_INIT_I2C + 1); - -static int board_ps8743_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - int rv = EC_SUCCESS; - int reg = 0; - - rv = ps8743_read(me, PS8743_REG_MODE, ®); - if (rv) - return rv; - - /* Disable FLIP pin, enable I2C control. */ - reg |= PS8743_MODE_FLIP_REG_CONTROL; - /* Disable CE_USB pin, enable I2C control. */ - reg |= PS8743_MODE_USB_REG_CONTROL; - /* Disable CE_DP pin, enable I2C control. */ - reg |= PS8743_MODE_DP_REG_CONTROL; - - /* - * DP specific config - * - * Enable/Disable IN_HPD on the DB. - */ - gpio_set_level(GPIO_USB_C1_DP_IN_HPD, - mux_state & USB_PD_MUX_DP_ENABLED); - - return ps8743_write(me, PS8743_REG_MODE, reg); -} - -const struct usb_mux usbc0_virtual_mux = { - .usb_port = 0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; - -const struct usb_mux usbc1_virtual_mux = { - .usb_port = 1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .i2c_port = I2C_PORT_USB_MUX0, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, - .next_mux = &usbc0_virtual_mux, - }, - { - .usb_port = 1, - .i2c_port = I2C_PORT_USB_MUX1, - .i2c_addr_flags = PS8743_I2C_ADDR0_FLAG, - .driver = &ps8743_usb_mux_driver, - .next_mux = &usbc1_virtual_mux, - .board_set = &board_ps8743_mux_set, - }, -}; - -/* - * I2C channels (A, B, and C) are using the same timing registers (00h~07h) - * at default. - * In order to set frequency independently for each channels, - * We use timing registers 09h~0Bh, and the supported frequency will be: - * 50KHz, 100KHz, 400KHz, or 1MHz. - * I2C channels (D, E and F) can be set different frequency on different ports. - * The I2C(D/E/F) frequency depend on the frequency of SMBus Module and - * the individual prescale register. - * The frequency of SMBus module is 24MHz on default. - * The allowed range of I2C(D/E/F) frequency is as following setting. - * SMBus Module Freq = PLL_CLOCK / ((IT83XX_ECPM_SCDCR2 & 0x0F) + 1) - * (SMBus Module Freq / 510) <= I2C Freq <= (SMBus Module Freq / 8) - * Channel D has multi-function and can be used as UART interface. - * Channel F is reserved for EC debug. - */ - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"bat_chg", IT83XX_I2C_CH_A, 100, GPIO_I2C_A_SCL, GPIO_I2C_A_SDA}, - {"sensor", IT83XX_I2C_CH_B, 400, GPIO_I2C_B_SCL, GPIO_I2C_B_SDA}, - {"usb0", IT83XX_I2C_CH_C, 400, GPIO_I2C_C_SCL, GPIO_I2C_C_SDA}, - {"usb1", IT83XX_I2C_CH_E, 400, GPIO_I2C_E_SCL, GPIO_I2C_E_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY); -} - - -void board_overcurrent_event(int port, int is_overcurrented) -{ - /* TODO: check correct operation for GOROH */ -} - -/* TCPC */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it8xxx2_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, -}; - -const struct cc_para_t *board_get_cc_tuning_parameter(enum usbpd_port port) -{ - const static struct cc_para_t - cc_parameter[CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT] = { - { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }, - { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }, - }; - - return &cc_parameter[port]; -} - -uint16_t tcpc_get_alert_status(void) -{ - /* - * C0 & C1: TCPC is embedded in the EC and processes interrupts in the - * chip code (it83xx/intc.c) - */ - return 0; -} - -void board_reset_pd_mcu(void) -{ - /* - * C0 & C1: TCPC is embedded in the EC and processes interrupts in the - * chip code (it83xx/intc.c) - */ -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit( - MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} - -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* - * We ignore the cc_pin and PPC vconn because polarity and PPC vconn - * should already be set correctly in the PPC driver via the pd - * state machine. - */ -} - -int board_set_active_charge_port(int port) -{ - int i; - int is_valid_port = port == 0 || (port == 1 && board_get_sub_board() == - SUB_BOARD_TYPEC); - - if (!is_valid_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - if (port == CHARGE_PORT_NONE) { - CPRINTS("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTS("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTS("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTS("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -/** - * Handle PS185 HPD changing state. - */ -int debounced_hpd; - -static void ps185_hdmi_hpd_deferred(void) -{ - const int new_hpd = gpio_get_level(GPIO_PS185_EC_DP_HPD); - - /* HPD status not changed, probably a glitch, just return. */ - if (debounced_hpd == new_hpd) - return; - - debounced_hpd = new_hpd; - - gpio_set_level(GPIO_EC_DPBRDG_HPD_ODL, !debounced_hpd); - CPRINTS(debounced_hpd ? "HDMI plug" : "HDMI unplug"); -} -DECLARE_DEFERRED(ps185_hdmi_hpd_deferred); - -#define PS185_HPD_DEBOUCE 250 - -static void hdmi_hpd_interrupt(enum gpio_signal signal) -{ - hook_call_deferred(&ps185_hdmi_hpd_deferred_data, PS185_HPD_DEBOUCE); -} - -/* HDMI/TYPE-C function shared subboard interrupt */ -static void x_ec_interrupt(enum gpio_signal signal) -{ - int sub = board_get_sub_board(); - - if (sub == SUB_BOARD_TYPEC) - /* C1: PPC interrupt */ - syv682x_interrupt(1); - else if (sub == SUB_BOARD_HDMI) - hdmi_hpd_interrupt(signal); - else - CPRINTS("Undetected subboard interrupt."); -} - -int ppc_get_alert_status(int port) -{ - if (port == 0) - return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0; - if (port == 1 && board_get_sub_board() == SUB_BOARD_TYPEC) - return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0; - - return 0; -} -/* SD Card */ -int board_regulator_get_info(uint32_t index, char *name, - uint16_t *num_voltages, uint16_t *voltages_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_get_info(id, name, num_voltages, - voltages_mv); -} - -int board_regulator_enable(uint32_t index, uint8_t enable) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_enable(id, enable); -} - -int board_regulator_is_enabled(uint32_t index, uint8_t *enabled) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_is_enabled(id, enabled); -} - -int board_regulator_set_voltage(uint32_t index, uint32_t min_mv, - uint32_t max_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_set_voltage(id, min_mv, max_mv); -} - -int board_regulator_get_voltage(uint32_t index, uint32_t *voltage_mv) -{ - enum mt6360_regulator_id id = index; - - return mt6360_regulator_get_voltage(id, voltage_mv); -} - -static void baseboard_init(void) -{ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); -} -DECLARE_HOOK(HOOK_INIT, baseboard_init, HOOK_PRIO_DEFAULT-1); diff --git a/baseboard/goroh/baseboard.h b/baseboard/goroh/baseboard.h deleted file mode 100644 index 55fa0ffab7..0000000000 --- a/baseboard/goroh/baseboard.h +++ /dev/null @@ -1,206 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Goroh board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* IT81202-bx config */ -/* - * NOTE: we need to make correct VCC voltage selection here if EC's VCC isn't - * connect to 1.8v on other versions. - */ -#define CONFIG_IT83XX_VCC_1P8V - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON -#define CONFIG_CHIPSET_MT8192 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_HIBERNATE_WAKE_PINS_DYNAMIC - -/* Chipset */ -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_CMD_POWERINDEBUG -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_S0 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_COMMON -#define CONFIG_PWM -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_WP_ACTIVE_HIGH - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_BATTERY_SMART - -/* BC12 */ -#define CONFIG_BC12_DETECT_MT6360 -#define CONFIG_BC12_DETECT_PI3USB9201 -#undef CONFIG_BC12_SINGLE_DRIVER -#define CONFIG_USB_CHARGER - -/* Charger */ -#define ADC_AMON_BMON ADC_CHARGER_AMON_R /* ADC name remap */ -#define ADC_PSYS ADC_CHARGER_PMON /* ADC name remap */ -#define ADC_VBUS ADC_VBUS_C0 /* ADC name remap */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_ISL9238C -#define CONFIG_CHARGER_MAINTAIN_VBAT -#define CONFIG_CHARGER_OTG -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_PSYS_READ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* BOARD_RS2 */ -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* BOARD_RS1 */ -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON - -/* Keyboard */ -#define CONFIG_CMD_KEYBOARD -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_GPIO - -/* I2C */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_I2C_VIRTUAL_BATTERY -#define I2C_PORT_CHARGER IT83XX_I2C_CH_A -#define I2C_PORT_BATTERY IT83XX_I2C_CH_A -#define I2C_PORT_ACCEL IT83XX_I2C_CH_B -#define I2C_PORT_PPC0 IT83XX_I2C_CH_C -#define I2C_PORT_PPC1 IT83XX_I2C_CH_E -#define I2C_PORT_USB_MUX0 IT83XX_I2C_CH_C -#define I2C_PORT_USB_MUX1 IT83XX_I2C_CH_E -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define CONFIG_SMBUS_PEC - -/* LED */ -#define CONFIG_LED_COMMON - -/* PD / USB-C / PPC */ -#define CONFIG_CMD_PPC_DUMP -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_IT83XX_TUNE_CC_PHY -#define CONFIG_USB_MUX_VIRTUAL -#define CONFIG_USBC_PPC -#define CONFIG_USBC_PPC_DEDICATED_INT -#define CONFIG_USBC_PPC_POLARITY -#define CONFIG_USBC_PPC_SYV682C -#define CONFIG_USBC_PPC_SYV682X_SMART_DISCHARGE -#define CONFIG_USBC_PPC_VCONN -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_MUX_IT5205 /* C0 */ -#define CONFIG_USB_MUX_PS8743 /* C1 */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_DISCHARGE -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DP_HPD_GPIO -#define CONFIG_USB_PD_DP_HPD_GPIO_CUSTOM -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_FRS_PPC -#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2 -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT -#define CONFIG_USB_PID 0x5566 /* TODO: update PID */ -#define CONFIG_USB_POWER_DELIVERY - -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* USB-A */ -#define CONFIG_USB_PORT_POWER_DUMB -#define USB_PORT_COUNT USBA_PORT_COUNT - -/* UART */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Sensor */ -#ifdef HAS_TASK_MOTIONSENSE -#define CONFIG_CMD_ACCEL_INFO -#define CONFIG_CMD_ACCELS - -#define CONFIG_ACCEL_FIFO -#define CONFIG_ACCEL_FIFO_SIZE 256 -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#define CONFIG_ACCEL_INTERRUPTS -#endif - -/* SPI / Host Command */ -#define CONFIG_SPI - -/* MKBP */ -#define CONFIG_MKBP_EVENT - -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_MKBP_USE_GPIO - -/* Voltage regulator control */ -#define CONFIG_HOSTCMD_REGULATOR - -/* Define the host events which are allowed to wakeup AP in S3. */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) - -/* GPIO name remapping */ -#define GPIO_EN_HDMI_PWR GPIO_EC_X_GPIO1 -#define GPIO_USB_C1_FRS_EN GPIO_EC_X_GPIO1 -#define GPIO_USB_C1_PPC_INT_ODL GPIO_X_EC_GPIO2 -#define GPIO_PS185_EC_DP_HPD GPIO_X_EC_GPIO2 -#define GPIO_USB_C1_DP_IN_HPD GPIO_EC_X_GPIO3 -#define GPIO_PS185_PWRDN_ODL GPIO_EC_X_GPIO3 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" -#include "power/mt8192.h" - -enum board_sub_board { - SUB_BOARD_NONE = -1, - SUB_BOARD_TYPEC, - SUB_BOARD_HDMI, - SUB_BOARD_COUNT, -}; - -int board_get_version(void); -void board_reset_pd_mcu(void); -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/goroh/board_id.c b/baseboard/goroh/board_id.c deleted file mode 100644 index a8bee6d412..0000000000 --- a/baseboard/goroh/board_id.c +++ /dev/null @@ -1,107 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "common.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "timer.h" -#include "util.h" - -/** - * Conversion based on following table: - * - * ID | Rp | Rd | Voltage - * | kOhm | kOhm | mV - * ---+------+------+-------- - * 0 | 51.1 | 2.2 | 136.2 - * 1 | 51.1 | 6.81 | 388.1 - * 2 | 51.1 | 11 | 584.5 - * 3 | 57.6 | 18 | 785.7 - * 4 | 51.1 | 22 | 993.2 - * 5 | 51.1 | 30 | 1220.7 - * 6 | 51.1 | 39.2 | 1432.6 - * 7 | 56 | 56 | 1650.0 - * 8 | 47 | 61.9 | 1875.8 - * 9 | 47 | 80.6 | 2084.5 - * 10 | 56 | 124 | 2273.3 - * 11 | 51.1 | 150 | 2461.5 - * 12 | 47 | 200 | 2672.1 - * 13 | 47 | 330 | 2888.6 - * 14 | 47 | 680 | 3086.7 - */ -const static int voltage_map[] = { - 136, - 388, - 584, - 785, - 993, - 1220, - 1432, - 1650, - 1875, - 2084, - 2273, - 2461, - 2672, - 2888, - 3086, -}; - -const int threshold_mv = 100; - -/** - * Convert ADC value to board id using the voltage table above. - * - * @param ch ADC channel to read, usually ADC_BOARD_ID_0 or ADC_BOARD_ID_1. - * - * @return a non-negative board id, or negative value if error. - */ -static int adc_value_to_numeric_id(enum adc_channel ch) -{ - int mv; - - gpio_set_level(GPIO_EN_EC_ID_ODL, 0); - /* Wait to allow cap charge */ - msleep(10); - - mv = adc_read_channel(ch); - if (mv == ADC_READ_ERROR) - mv = adc_read_channel(ch); - - gpio_set_level(GPIO_EN_EC_ID_ODL, 1); - - if (mv == ADC_READ_ERROR) - return -EC_ERROR_UNKNOWN; - - for (int i = 0; i < ARRAY_SIZE(voltage_map); i++) { - if (IN_RANGE(mv, voltage_map[i] - threshold_mv, - voltage_map[i] + threshold_mv)) - return i; - } - - return -EC_ERROR_UNKNOWN; -} - -static int version = -1; - -/* b/163963220: Cache ADC value before board_hibernate_late() reads it */ -static void board_version_init(void) -{ - version = adc_value_to_numeric_id(ADC_BOARD_ID_0); - if (version < 0) { - ccprints("WARN:BOARD_ID_0"); - ccprints("Assuming board id = 0"); - - version = 0; - } -} -DECLARE_HOOK(HOOK_INIT, board_version_init, HOOK_PRIO_INIT_ADC + 1); - -int board_get_version(void) -{ - return version; -} diff --git a/baseboard/goroh/build.mk b/baseboard/goroh/build.mk deleted file mode 100644 index 58e9934bc0..0000000000 --- a/baseboard/goroh/build.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o board_id.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/baseboard/goroh/usb_pd_policy.c b/baseboard/goroh/usb_pd_policy.c deleted file mode 100644 index 72213d311c..0000000000 --- a/baseboard/goroh/usb_pd_policy.c +++ /dev/null @@ -1,214 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -#include "charge_manager.h" -#include "chipset.h" -#include "timer.h" -#include "usb_dp_alt_mode.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" - -#if CONFIG_USB_PD_3A_PORTS != 1 -#error Goroh reference must have at least one 3.0 A port -#endif - -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) - -int svdm_get_hpd_gpio(int port) -{ - /* HPD is low active, inverse the result */ - return !gpio_get_level(GPIO_EC_DPBRDG_HPD_ODL); -} - -void svdm_set_hpd_gpio(int port, int en) -{ - /* - * HPD is low active, inverse the en - * TODO: C0&C1 shares the same HPD, implement FCFS policy. - */ - gpio_set_level(GPIO_EC_DPBRDG_HPD_ODL, !en); -} - -/** - * Is the port fine to be muxed its DisplayPort lines? - * - * Only one port can be muxed to DisplayPort at a time. - * - * @param port Port number of TCPC. - * @return 1 is fine; 0 is bad as other port is already muxed; - */ -static int is_dp_muxable(int port) -{ - int i; - - for (i = 0; i < board_get_usb_pd_port_count(); i++) { - if (i != port) { - if (usb_mux_get(i) & USB_PD_MUX_DP_ENABLED) - return 0; - } - } - - return 1; -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); - int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - int cur_lvl = svdm_get_hpd_gpio(port); -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - mux_state_t mux_state; - - dp_status[port] = payload[1]; - - if (!is_dp_muxable(port)) { - /* TODO(waihong): Info user? */ - CPRINTS("p%d: The other port is already muxed.", port); - return 0; /* nak */ - } - - if (lvl) - gpio_set_level_verbose(CC_USBPD, GPIO_DP_AUX_PATH_SEL, port); - - if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && - (irq || lvl)) - /* - * Wake up the AP. IRQ or level high indicates a DP sink is now - * present. - */ - if (IS_ENABLED(CONFIG_MKBP_EVENT)) - pd_notify_dp_alt_mode_entry(port); - - /* Its initial DP status message prior to config */ - if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { - if (lvl) - dp_flags[port] |= DP_FLAGS_HPD_HI_PENDING; - return 1; - } - -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - if (irq && !lvl) { - /* - * IRQ can only be generated when the level is high, because - * the IRQ is signaled by a short low pulse from the high level. - */ - CPRINTF("ERR:HPD:IRQ&LOW\n"); - return 0; /* nak */ - } - - if (irq && cur_lvl) { - uint64_t now = get_time().val; - /* wait for the minimum spacing between IRQ_HPD if needed */ - if (now < svdm_hpd_deadline[port]) - usleep(svdm_hpd_deadline[port] - now); - - /* generate IRQ_HPD pulse */ - svdm_set_hpd_gpio(port, 0); - /* - * b/171172053#comment14: since the HPD_DSTREAM_DEBOUNCE_IRQ is - * very short (500us), we can use udelay instead of usleep for - * more stable pulse period. - */ - udelay(HPD_DSTREAM_DEBOUNCE_IRQ); - svdm_set_hpd_gpio(port, 1); - } else { - svdm_set_hpd_gpio(port, lvl); - } - - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - - mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | - (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); - usb_mux_hpd_update(port, mux_state); - -#ifdef USB_PD_PORT_TCPC_MST - if (port == USB_PD_PORT_TCPC_MST) - baseboard_mst_enable_control(port, lvl); -#endif - - /* ack */ - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ -#ifdef CONFIG_USB_PD_DP_HPD_GPIO - svdm_set_hpd_gpio(port, 0); -#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); - -#ifdef USB_PD_PORT_TCPC_MST - if (port == USB_PD_PORT_TCPC_MST) - baseboard_mst_enable_control(port, 0); -#endif -} - -int pd_snk_is_vbus_provided(int port) -{ - /* TODO(yllin): check SNK VBUS detection */ - return ppc_is_vbus_present(port); - - /* - * (b:181203590#comment20) TODO(yllin): use - * PD_VSINK_DISCONNECT_PD for non-5V case. - */ - return charge_manager_get_vbus_voltage(port) >= - PD_V_SINK_DISCONNECT_MAX; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_check_vconn_swap(int port) -{ - /* Allow Vconn swap if AP is on. */ - return chipset_in_state(CHIPSET_STATE_SUSPEND | CHIPSET_STATE_ON); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} diff --git a/baseboard/grunt/analyzestack.yaml b/baseboard/grunt/analyzestack.yaml deleted file mode 100644 index 7ff5f39644..0000000000 --- a/baseboard/grunt/analyzestack.yaml +++ /dev/null @@ -1,2 +0,0 @@ -remove: -- panic_assert_fail diff --git a/baseboard/grunt/baseboard.c b/baseboard/grunt/baseboard.c deleted file mode 100644 index cf49fc0566..0000000000 --- a/baseboard/grunt/baseboard.c +++ /dev/null @@ -1,815 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Grunt family-specific configuration */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "charge_state_v2.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "cros_board_info.h" -#include "driver/accel_kionix.h" -#include "driver/accel_kx022.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/bc12/max14637.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/sn5s330.h" -#include "driver/tcpm/anx7447.h" -#include "driver/tcpm/anx74xx.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/temp_sensor/sb_tsi.h" -#include "ec_commands.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power.h" -#include "power_button.h" -#include "registers.h" -#include "switch.h" -#include "system.h" -#include "task.h" -#include "tcpm/tcpci.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_CHARGER] = { - "CHARGER", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0 - }, - [ADC_TEMP_SENSOR_SOC] = { - "SOC", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0 - }, - [ADC_VBUS] = { - "VBUS", NPCX_ADC_CH8, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0 - }, - [ADC_SKU_ID1] = { - "SKU1", NPCX_ADC_CH9, ADC_MAX_VOLT, ADC_READ_MAX+1, 0 - }, - [ADC_SKU_ID2] = { - "SKU2", NPCX_ADC_CH4, ADC_MAX_VOLT, ADC_READ_MAX+1, 0 - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* Power signal list. Must match order of enum power_signal. */ -const struct power_signal_info power_signal_list[] = { - {GPIO_PCH_SLP_S3_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S3_DEASSERTED"}, - {GPIO_PCH_SLP_S5_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S5_DEASSERTED"}, - {GPIO_S0_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "S0_PGOOD"}, - {GPIO_S5_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "S5_PGOOD"}, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 - [USB_PD_PORT_ANX74XX] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = ANX74XX_I2C_ADDR1_FLAGS, - }, - .drv = &anx74xx_tcpm_drv, - /* Alert is active-low, open-drain */ - .flags = TCPC_FLAGS_ALERT_OD, - }, -#elif defined(VARIANT_GRUNT_TCPC_0_ANX3447) - [USB_PD_PORT_ANX74XX] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS, - }, - .drv = &anx7447_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, -#endif - [USB_PD_PORT_PS8751] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC1, - .addr_flags = PS8751_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, -}; - -void tcpc_alert_event(enum gpio_signal signal) -{ - int port = -1; - - switch (signal) { - case GPIO_USB_C0_PD_INT_ODL: - port = 0; - break; - case GPIO_USB_C1_PD_INT_ODL: - port = 1; - break; - default: - return; - } - - schedule_deferred_pd_interrupt(port); -} - -void board_tcpc_init(void) -{ - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) - board_reset_pd_mcu(); - - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_SWCTL_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_SWCTL_INT_ODL); - - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL); - -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 - /* Enable CABLE_DET interrupt for ANX3429 wake from standby */ - gpio_enable_interrupt(GPIO_USB_C0_CABLE_DET); -#endif - /* - * Initialize HPD to low; after sysjump SOC needs to see - * HPD pulse to enable video path - */ - for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1); - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) { -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 - if (gpio_get_level(GPIO_USB_C0_PD_RST_L)) -#elif defined(VARIANT_GRUNT_TCPC_0_ANX3447) - if (!gpio_get_level(GPIO_USB_C0_PD_RST)) -#endif - status |= PD_STATUS_TCPC_ALERT_0; - } - - if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C1_PD_RST_L)) - status |= PD_STATUS_TCPC_ALERT_1; - } - - return status; -} - -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 -static void anx74xx_cable_det_handler(void) -{ - int cable_det = gpio_get_level(GPIO_USB_C0_CABLE_DET); - int reset_n = gpio_get_level(GPIO_USB_C0_PD_RST_L); - - /* - * A cable_det low->high transition was detected. If following the - * debounce time, cable_det is high, and reset_n is low, then ANX3429 is - * currently in standby mode and needs to be woken up. Set the - * TCPC_RESET event which will bring the ANX3429 out of standby - * mode. Setting this event is gated on reset_n being low because the - * ANX3429 will always set cable_det when transitioning to normal mode - * and if in normal mode, then there is no need to trigger a tcpc reset. - */ - if (cable_det && !reset_n) - task_set_event(TASK_ID_PD_C0, PD_EVENT_TCPC_RESET); -} -DECLARE_DEFERRED(anx74xx_cable_det_handler); - -void anx74xx_cable_det_interrupt(enum gpio_signal signal) -{ - /* debounce for 2 msec */ - hook_call_deferred(&anx74xx_cable_det_handler_data, (2 * MSEC)); -} - -/** - * Power on (or off) a single TCPC. - * minimum on/off delays are included. - * - * @param port Port number of TCPC. - * @param mode 0: power off, 1: power on. - */ -void board_set_tcpc_power_mode(int port, int mode) -{ - if (port != USB_PD_PORT_ANX74XX) - return; - - switch (mode) { - case ANX74XX_NORMAL_MODE: - gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 1); - msleep(ANX74XX_PWR_H_RST_H_DELAY_MS); - gpio_set_level(GPIO_USB_C0_PD_RST_L, 1); - break; - case ANX74XX_STANDBY_MODE: - gpio_set_level(GPIO_USB_C0_PD_RST_L, 0); - msleep(ANX74XX_RST_L_PWR_L_DELAY_MS); - gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0); - msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS); - break; - default: - break; - } -} -#endif /* VARIANT_GRUNT_TCPC_0_ANX3429 */ - -void board_reset_pd_mcu(void) -{ -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 - /* Assert reset to TCPC1 (ps8751) */ - gpio_set_level(GPIO_USB_C1_PD_RST_L, 0); - - /* Assert reset to TCPC0 (anx3429) */ - gpio_set_level(GPIO_USB_C0_PD_RST_L, 0); - - /* TCPC1 (ps8751) requires 1ms reset down assertion */ - msleep(MAX(1, ANX74XX_RST_L_PWR_L_DELAY_MS)); - - /* Deassert reset to TCPC1 */ - gpio_set_level(GPIO_USB_C1_PD_RST_L, 1); - /* Disable TCPC0 power */ - gpio_set_level(GPIO_EN_USB_C0_TCPC_PWR, 0); - - /* - * anx3429 requires 10ms reset/power down assertion - */ - msleep(ANX74XX_PWR_L_PWR_H_DELAY_MS); - board_set_tcpc_power_mode(USB_PD_PORT_ANX74XX, 1); -#elif defined(VARIANT_GRUNT_TCPC_0_ANX3447) - /* Assert reset to TCPC0 (anx3447) */ - gpio_set_level(GPIO_USB_C0_PD_RST, 1); - msleep(ANX74XX_RESET_HOLD_MS); - gpio_set_level(GPIO_USB_C0_PD_RST, 0); - msleep(ANX74XX_RESET_FINISH_MS); - - /* Assert reset to TCPC1 (ps8751) */ - gpio_set_level(GPIO_USB_C1_PD_RST_L, 0); - msleep(PS8XXX_RESET_DELAY_MS); - gpio_set_level(GPIO_USB_C1_PD_RST_L, 1); -#endif -} - -static uint32_t sku_id; - -static int ps8751_tune_mux(const struct usb_mux *me) -{ - /* Tune USB mux registers for treeya's port 1 Rx measurement */ - if (((sku_id >= 0xa0) && (sku_id <= 0xaf)) || - sku_id == 0xbe || sku_id == 0xbf) - mux_write(me, PS8XXX_REG_MUX_USB_C2SS_EQ, 0x40); - - return EC_SUCCESS; -} - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 - [USB_PD_PORT_ANX74XX] = { - .usb_port = USB_PD_PORT_ANX74XX, - .driver = &anx74xx_tcpm_usb_mux_driver, - .hpd_update = &anx74xx_tcpc_update_hpd_status, - }, -#elif defined(VARIANT_GRUNT_TCPC_0_ANX3447) - [USB_PD_PORT_ANX74XX] = { - .usb_port = USB_PD_PORT_ANX74XX, - .driver = &anx7447_usb_mux_driver, - .hpd_update = &anx7447_tcpc_update_hpd_status, - }, -#endif - [USB_PD_PORT_PS8751] = { - .usb_port = USB_PD_PORT_PS8751, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .board_init = &ps8751_tune_mux, - } -}; - -struct ppc_config_t ppc_chips[] = { - { - .i2c_port = I2C_PORT_TCPC0, - .i2c_addr_flags = SN5S330_ADDR0_FLAGS, - .drv = &sn5s330_drv - }, - { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = SN5S330_ADDR0_FLAGS, - .drv = &sn5s330_drv - }, -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -void ppc_interrupt(enum gpio_signal signal) -{ - int port = (signal == GPIO_USB_C0_SWCTL_INT_ODL) ? 0 : 1; - - sn5s330_interrupt(port); -} - -int ppc_get_alert_status(int port) -{ - if (port == 0) - return gpio_get_level(GPIO_USB_C0_SWCTL_INT_ODL) == 0; - else - return gpio_get_level(GPIO_USB_C1_SWCTL_INT_ODL) == 0; -} - -void board_overcurrent_event(int port, int is_overcurrented) -{ - enum gpio_signal signal = (port == 0) ? GPIO_USB_C0_OC_L - : GPIO_USB_C1_OC_L; - /* Note that the levels are inverted because the pin is active low. */ - int lvl = is_overcurrented ? 0 : 1; - - gpio_set_level(signal, lvl); - - CPRINTS("p%d: overcurrent!", port); -} - -/* BC 1.2 chip Configuration */ -const struct max14637_config_t max14637_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_ANX74XX] = { - .chip_enable_pin = GPIO_USB_C0_BC12_VBUS_ON_L, - .chg_det_pin = GPIO_USB_C0_BC12_CHG_DET, - .flags = MAX14637_FLAGS_ENABLE_ACTIVE_LOW, - }, - [USB_PD_PORT_PS8751] = { - .chip_enable_pin = GPIO_USB_C1_BC12_VBUS_ON_L, - .chg_det_pin = GPIO_USB_C1_BC12_CHG_DET, - .flags = MAX14637_FLAGS_ENABLE_ACTIVE_LOW, - }, -}; - -/* Charger Chip Configuration */ -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - - -const int usb_port_enable[USB_PORT_COUNT] = { - GPIO_EN_USB_A0_5V, - GPIO_EN_USB_A1_5V, -}; - -static void baseboard_chipset_suspend(void) -{ - /* - * Turn off display backlight. This ensures that the backlight stays off - * in S3, no matter what the AP has it set to. The AP also controls it. - * This is here more for legacy reasons. - */ - gpio_set_level(GPIO_ENABLE_BACKLIGHT_L, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, baseboard_chipset_suspend, - HOOK_PRIO_DEFAULT); - -static void baseboard_chipset_resume(void) -{ - /* Allow display backlight to turn on. See above backlight comment */ - gpio_set_level(GPIO_ENABLE_BACKLIGHT_L, 0); - -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, baseboard_chipset_resume, HOOK_PRIO_DEFAULT); - -static void baseboard_chipset_startup(void) -{ - /* - * Enable sensor power (lid accel, gyro) in S3 for calculating the lid - * angle (needed on convertibles to disable resume from keyboard in - * tablet mode). - */ - gpio_set_level(GPIO_EN_PP1800_SENSOR, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, baseboard_chipset_startup, - HOOK_PRIO_DEFAULT); - -static void baseboard_chipset_shutdown(void) -{ - /* Disable sensor power (lid accel, gyro) in S5. */ - gpio_set_level(GPIO_EN_PP1800_SENSOR, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, baseboard_chipset_shutdown, - HOOK_PRIO_DEFAULT); - -int board_is_i2c_port_powered(int port) -{ - if (port != I2C_PORT_SENSOR) - return 1; - - /* Sensor power (lid accel, gyro) is off in S5 (and G3). */ - return chipset_in_state(CHIPSET_STATE_ANY_OFF) ? 0 : 1; -} - -int board_set_active_charge_port(int port) -{ - int i; - - CPRINTS("New chg p%d", port); - - if (port == CHARGE_PORT_NONE) { - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("p%d: sink disable failed.", i); - } - - return EC_SUCCESS; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTF("Skip enable p%d", port); - return EC_ERROR_INVAL; - } - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTS("p%d: sink disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTS("p%d: sink enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - /* - * Limit the input current to 95% negotiated limit, - * to account for the charger chip margin. - */ - charge_ma = charge_ma * 95 / 100; - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* - * F3 key scan cycle completed but scan input is not - * charging to logic high when EC start scan next - * column for "T" key, so we set .output_settle_us - * to 80us - */ - .output_settle_us = 80, - .debounce_down_us = 6 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 1500, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = SECOND, - .actual_key_mask = { - 0x3c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -/* - * We use 11 as the scaling factor so that the maximum mV value below (2761) - * can be compressed to fit in a uint8_t. - */ -#define THERMISTOR_SCALING_FACTOR 11 - -/* - * Values are calculated from the "Resistance VS. Temperature" table on the - * Murata page for part NCP15WB473F03RC. Vdd=3.3V, R=30.9Kohm. - */ -static const struct thermistor_data_pair thermistor_data[] = { - { 2761 / THERMISTOR_SCALING_FACTOR, 0}, - { 2492 / THERMISTOR_SCALING_FACTOR, 10}, - { 2167 / THERMISTOR_SCALING_FACTOR, 20}, - { 1812 / THERMISTOR_SCALING_FACTOR, 30}, - { 1462 / THERMISTOR_SCALING_FACTOR, 40}, - { 1146 / THERMISTOR_SCALING_FACTOR, 50}, - { 878 / THERMISTOR_SCALING_FACTOR, 60}, - { 665 / THERMISTOR_SCALING_FACTOR, 70}, - { 500 / THERMISTOR_SCALING_FACTOR, 80}, - { 434 / THERMISTOR_SCALING_FACTOR, 85}, - { 376 / THERMISTOR_SCALING_FACTOR, 90}, - { 326 / THERMISTOR_SCALING_FACTOR, 95}, - { 283 / THERMISTOR_SCALING_FACTOR, 100} -}; - -static const struct thermistor_info thermistor_info = { - .scaling_factor = THERMISTOR_SCALING_FACTOR, - .num_pairs = ARRAY_SIZE(thermistor_data), - .data = thermistor_data, -}; - -static int board_get_temp(int idx, int *temp_k) -{ - /* idx is the sensor index set below in temp_sensors[] */ - int mv = adc_read_channel( - idx ? ADC_TEMP_SENSOR_SOC : ADC_TEMP_SENSOR_CHARGER); - int temp_c; - - if (mv < 0) - return -1; - - temp_c = thermistor_linear_interpolate(mv, &thermistor_info); - *temp_k = C_TO_K(temp_c); - return 0; -} - -const struct temp_sensor_t temp_sensors[] = { - {"Charger", TEMP_SENSOR_TYPE_BOARD, board_get_temp, 0}, - {"SOC", TEMP_SENSOR_TYPE_BOARD, board_get_temp, 1}, - {"CPU", TEMP_SENSOR_TYPE_CPU, sb_tsi_get_val, 0}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -#ifdef HAS_TASK_MOTIONSENSE - -/* Motion sensors */ -static struct mutex g_lid_mutex; -static struct mutex g_base_mutex; - -/* sensor private data */ -static struct kionix_accel_data g_kx022_data; -static struct bmi_drv_data_t g_bmi160_data; - -/* TODO(gcc >= 5.0) Remove the casts to const pointer at rot_standard_ref */ -struct motion_sensor_t motion_sensors[] = { - [LID_ACCEL] = { - .name = "Lid Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_KX022, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_LID, - .drv = &kionix_accel_drv, - .mutex = &g_lid_mutex, - .drv_data = &g_kx022_data, - .port = I2C_PORT_SENSOR, - .i2c_spi_addr_flags = KX022_ADDR1_FLAGS, - .rot_standard_ref = NULL, - .default_range = 2, /* g, enough for laptop. */ - .min_frequency = KX022_ACCEL_MIN_FREQ, - .max_frequency = KX022_ACCEL_MAX_FREQ, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100, - }, - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, - - [BASE_ACCEL] = { - .name = "Base Accel", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_ACCEL, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = I2C_PORT_SENSOR, - .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, - .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/ - .rot_standard_ref = NULL, - .min_frequency = BMI_ACCEL_MIN_FREQ, - .max_frequency = BMI_ACCEL_MAX_FREQ, - .config = { - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S0] = { - .odr = 10000 | ROUND_UP_FLAG, - .ec_rate = 100, - }, - /* EC use accel for angle detection */ - [SENSOR_CONFIG_EC_S3] = { - .odr = 10000 | ROUND_UP_FLAG, - }, - }, - }, - - [BASE_GYRO] = { - .name = "Base Gyro", - .active_mask = SENSOR_ACTIVE_S0_S3, - .chip = MOTIONSENSE_CHIP_BMI160, - .type = MOTIONSENSE_TYPE_GYRO, - .location = MOTIONSENSE_LOC_BASE, - .drv = &bmi160_drv, - .mutex = &g_base_mutex, - .drv_data = &g_bmi160_data, - .port = I2C_PORT_SENSOR, - .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, - .default_range = 1000, /* dps */ - .rot_standard_ref = NULL, - .min_frequency = BMI_GYRO_MIN_FREQ, - .max_frequency = BMI_GYRO_MAX_FREQ, - }, -}; - -unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); - -#endif /* HAS_TASK_MOTIONSENSE */ - -__override void lid_angle_peripheral_enable(int enable) -{ - if (board_is_convertible()) - keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); -} - -static const int sku_thresh_mv[] = { - /* Vin = 3.3V, Ideal voltage, R2 values listed below */ - /* R1 = 51.1 kOhm */ - 200, /* 124 mV, 2.0 Kohm */ - 366, /* 278 mV, 4.7 Kohm */ - 550, /* 456 mV, 8.2 Kohm */ - 752, /* 644 mV, 12.4 Kohm */ - 927, /* 860 mV, 18.0 Kohm */ - 1073, /* 993 mV, 22.0 Kohm */ - 1235, /* 1152 mV, 27.4 Kohm */ - 1386, /* 1318 mV, 34.0 Kohm */ - 1552, /* 1453 mV, 40.2 Kohm */ - /* R1 = 10.0 kOhm */ - 1739, /* 1650 mV, 10.0 Kohm */ - 1976, /* 1827 mV, 12.4 Kohm */ - 2197, /* 2121 mV, 18.0 Kohm */ - 2344, /* 2269 mV, 22.0 Kohm */ - 2484, /* 2418 mV, 27.4 Kohm */ - 2636, /* 2550 mV, 34.0 Kohm */ - 2823, /* 2721 mV, 47.0 Kohm */ -}; - -static int board_read_sku_adc(enum adc_channel chan) -{ - int mv; - int i; - - mv = adc_read_channel(chan); - - if (mv == ADC_READ_ERROR) - return -1; - - for (i = 0; i < ARRAY_SIZE(sku_thresh_mv); i++) - if (mv < sku_thresh_mv[i]) - return i; - - return -1; -} - -static uint32_t board_get_adc_sku_id(void) -{ - int sku_id1, sku_id2; - - sku_id1 = board_read_sku_adc(ADC_SKU_ID1); - sku_id2 = board_read_sku_adc(ADC_SKU_ID2); - - if (sku_id1 < 0 || sku_id2 < 0) - return 0; - - return (sku_id2 << 4) | sku_id1; -} - -static int board_get_gpio_board_version(void) -{ - return - (!!gpio_get_level(GPIO_BOARD_VERSION1) << 0) | - (!!gpio_get_level(GPIO_BOARD_VERSION2) << 1) | - (!!gpio_get_level(GPIO_BOARD_VERSION3) << 2); -} - -static int board_version; - -static void cbi_init(void) -{ - board_version = board_get_gpio_board_version(); - sku_id = board_get_adc_sku_id(); - - /* - * Use board version and SKU ID from CBI EEPROM if the board supports - * it and the SKU ID set via resistors + ADC is not valid. - */ -#ifdef CONFIG_CBI_EEPROM - if (sku_id == 0 || sku_id == 0xff) { - uint32_t val; - - if (cbi_get_board_version(&val) == EC_SUCCESS) - board_version = val; - if (cbi_get_sku_id(&val) == EC_SUCCESS) - sku_id = val; - } -#endif - -#ifdef HAS_TASK_MOTIONSENSE - board_update_sensor_config_from_sku(); -#endif - - ccprints("Board Version: %d (0x%x)", board_version, board_version); - ccprints("SKU: %d (0x%x)", sku_id, sku_id); -} -/* - * Reading the SKU resistors requires the ADC module. If we are using EEPROM - * then we also need the I2C module, but that is available before ADC. - */ -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_ADC + 1); - -__override uint32_t board_get_sku_id(void) -{ - return sku_id; -} - -int board_get_version(void) -{ - return board_version; -} - -/* - * Returns 1 for boards that are convertible into tablet mode, and zero for - * clamshells. - */ -int board_is_convertible(void) -{ - /* Grunt: 6 */ - /* Kasumi360: 82 */ - /* Treeya360: a8-af, be, bf*/ - return (sku_id == 6 || sku_id == 82 || - ((sku_id >= 0xa8) && (sku_id <= 0xaf)) || - sku_id == 0xbe || sku_id == 0xbf); -} - -int board_is_lid_angle_tablet_mode(void) -{ - return board_is_convertible(); -} - -__override uint32_t board_override_feature_flags0(uint32_t flags0) -{ - /* - * Remove keyboard backlight feature for devices that don't support it. - * All Treeya and Treeya360 models do not support keyboard backlight. - */ - if (sku_id == 16 || sku_id == 17 || - sku_id == 20 || sku_id == 21 || - sku_id == 32 || sku_id == 33 || - sku_id == 40 || sku_id == 41 || - sku_id == 44 || sku_id == 45 || - ((sku_id >= 0xa0) && (sku_id <= 0xaf)) || - sku_id == 0xbe || sku_id == 0xbf) - return (flags0 & ~EC_FEATURE_MASK_0(EC_FEATURE_PWM_KEYB)); - else - return flags0; -} - -void board_hibernate(void) -{ - /* - * Some versions of some boards keep the port 0 PPC powered on while - * the EC hibernates (so Closed Case Debugging keeps working). - * Make sure the source FET is off and turn on the sink FET, so that - * plugging in AC will wake the EC. This matches the dead-battery - * behavior of the powered off PPC. - */ - ppc_vbus_source_enable(0, 0); - ppc_vbus_sink_enable(0, 1); - - /* - * If CCD not active, set port 0 SBU_EN=0 to avoid power leakage during - * hibernation (b/175674973). - */ - if (gpio_get_level(GPIO_CCD_MODE_ODL)) - ppc_set_sbu(0, 0); -} diff --git a/baseboard/grunt/baseboard.h b/baseboard/grunt/baseboard.h deleted file mode 100644 index c97ece285f..0000000000 --- a/baseboard/grunt/baseboard.h +++ /dev/null @@ -1,260 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Grunt family-specific configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -#if (defined(VARIANT_GRUNT_TCPC_0_ANX3429) \ - + defined(VARIANT_GRUNT_TCPC_0_ANX3447)) != 1 -#error Must choose VARIANT_GRUNT_TCPC_0_ANX3429 or VARIANT_GRUNT_TCPC_0_ANX3447 -#endif - -/* NPCX7 config */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -#define NPCX_TACH_SEL2 0 /* No tach. */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ - -/* Internal SPI flash on NPCX7 */ -/* Flash is 1MB but reserve half for future use. */ -#define CONFIG_FLASH_SIZE_BYTES (512 * 1024) -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - -/* - * Enable 1 slot of secure temporary storage to support - * suspend/resume with read/write memory training. - */ -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#define CONFIG_ADC -#define CONFIG_BACKLIGHT_LID -#define CONFIG_BACKLIGHT_LID_ACTIVE_LOW -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_HIBERNATE_PSL -#define CONFIG_HOSTCMD_LPC -#define CONFIG_HOSTCMD_SKUID -#define CONFIG_I2C -#define CONFIG_I2C_BUS_MAY_BE_UNPOWERED -#define CONFIG_I2C_CONTROLLER -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_S0 -#define CONFIG_LTO -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR_NCP15WB -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS - -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_L -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART - -#define CONFIG_BC12_DETECT_MAX14637 -#define CONFIG_CHARGER -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC - -/* - * This limit impairs compatibility with BC1.2 chargers that are not actually - * capable of supplying 500 mA of current. When the charger is paralleled with - * the battery, raising this limit allows the power system to draw more current - * from the charger during startup. This improves compatibility with system - * batteries that may become excessively imbalanced after extended periods of - * rest. - * - * See also b/111214767 - */ -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_ISL9238 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_USB_CHARGER - -#define CONFIG_CHIPSET_STONEY -#define CONFIG_CHIPSET_RESET_HOOK -/* - * ACOK from ISL9238 sometimes has a negative pulse after connecting - * USB-C power. We want to ignore it. b/77455171 - */ -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 200 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SHUTDOWN_PAUSE_IN_S5 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - - -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_8042 - -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DP_HPD_GPIO -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#ifdef VARIANT_GRUNT_TCPC_0_ANX3429 -#define CONFIG_USB_PD_TCPM_ANX3429 -#elif defined(VARIANT_GRUNT_TCPC_0_ANX3447) -#define CONFIG_USB_PD_TCPM_ANX7447 -#endif -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_PS8751 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USBC_PPC_SN5S330 -#define CONFIG_USBC_PPC_DEDICATED_INT -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_DUMB -#define USB_PORT_COUNT 2 - -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ - -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* - * Require PD negotiation to be complete when we are in a low-battery condition - * prior to releasing depthcharge to the kernel. - */ -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 15001 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 3 - -/* Increase length of history buffer for port80 messages. */ -#undef CONFIG_PORT80_HISTORY_LEN -#define CONFIG_PORT80_HISTORY_LEN 256 - -#define I2C_PORT_BATTERY I2C_PORT_POWER -#define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_POWER NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_THERMAL_AP NPCX_I2C_PORT3_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 -/* Accelerometer and Gyroscope are the same device. */ -#define I2C_PORT_ACCEL I2C_PORT_SENSOR - -/* Sensors */ -#define CONFIG_MKBP_EVENT -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT - -/* Thermal */ -#define CONFIG_TEMP_SENSOR_SB_TSI - -#ifndef VARIANT_GRUNT_NO_SENSORS -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is a power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#endif /* VARIANT_GRUNT_NO_SENSORS */ - -#define USB_PD_PORT_ANX74XX 0 -#define USB_PD_PORT_PS8751 1 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "math_util.h" -#include "registers.h" - -enum adc_channel { - ADC_TEMP_SENSOR_CHARGER, - ADC_TEMP_SENSOR_SOC, - ADC_VBUS, - ADC_SKU_ID1, - ADC_SKU_ID2, - ADC_CH_COUNT -}; - -enum power_signal { - X86_SLP_S3_N, - X86_SLP_S5_N, - X86_S0_PGOOD, - X86_S5_PGOOD, - POWER_SIGNAL_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER = 0, - TEMP_SENSOR_SOC, - TEMP_SENSOR_CPU, - TEMP_SENSOR_COUNT -}; - -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT, -}; - -/* - * Matrix to rotate accelerators into the standard reference frame. The default - * is the identity which is correct for the reference design. Variations of - * Grunt may need to change it for manufacturability. - * For the lid: - * +x to the right - * +y up - * +z out of the page - * - * The principle axes of the body are aligned with the lid when the lid is in - * the 180 degree position (open, flat). - * - * Boards within the Grunt family may need to modify this definition at - * board_init() time. - */ -extern mat33_fp_t grunt_base_standard_ref; - -/* Sensors without hardware FIFO are in forced mode */ -#define CONFIG_ACCEL_FORCE_MODE_MASK (1 << LID_ACCEL) - -void board_reset_pd_mcu(void); - -/* Common definition for the USB PD interrupt handlers. */ -void tcpc_alert_event(enum gpio_signal signal); -void ppc_interrupt(enum gpio_signal signal); -void anx74xx_cable_det_interrupt(enum gpio_signal signal); - -int board_get_version(void); -int board_is_convertible(void); -void board_update_sensor_config_from_sku(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/grunt/build.mk b/baseboard/grunt/build.mk deleted file mode 100644 index cb9d607c36..0000000000 --- a/baseboard/grunt/build.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -*- makefile -*- -# Copyright 2018 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/baseboard/grunt/usb_pd_policy.c b/baseboard/grunt/usb_pd_policy.c deleted file mode 100644 index 7c4fff953c..0000000000 --- a/baseboard/grunt/usb_pd_policy.c +++ /dev/null @@ -1,149 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for Grunt boards */ - -#include "charge_manager.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\ - PDO_FIXED_COMM_CAP) - -int pd_check_vconn_swap(int port) -{ - /* in G3, do not allow vconn swap since 5V rail is off */ - return gpio_get_level(GPIO_S5_PGOOD); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int pd_snk_is_vbus_provided(int port) -{ - return ppc_is_vbus_present(port); -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} - -/* ----------------- Vendor Defined Messages ------------------ */ -#ifdef CONFIG_USB_PD_ALT_MODE_DFP -mux_state_t svdm_dp_mux_mode(int port) -{ - int mf_pref = PD_VDO_DPSTS_MF_PREF(dp_status[port]); - int pin_mode = pd_dfp_dp_get_pin_mode(port, dp_status[port]); - /* - * Multi-function operation is only allowed if that pin config is - * supported. - */ - if ((pin_mode & MODE_DP_PIN_MF_MASK) && mf_pref) - return USB_PD_MUX_DOCK; - else - return USB_PD_MUX_DP_ENABLED; -} - -__override int svdm_dp_config(int port, uint32_t *payload) -{ - int opos = pd_alt_mode(port, TCPCI_MSG_SOP, USB_SID_DISPLAYPORT); - int mf_pref = PD_VDO_DPSTS_MF_PREF(dp_status[port]); - int pin_mode = pd_dfp_dp_get_pin_mode(port, dp_status[port]); - mux_state_t mux_mode = svdm_dp_mux_mode(port); - - if (!pin_mode) - return 0; - - CPRINTS("pin_mode: %x, mf: %d, mux: %d", pin_mode, mf_pref, mux_mode); - - /* - * Place the USB Type-C pins that are to be re-configured to DisplayPort - * Configuration into the Safe state. For USB_PD_MUX_DOCK, the - * superspeed signals can remain connected. For USB_PD_MUX_DP_ENABLED, - * disconnect the superspeed signals here, before the pins are - * re-configured to DisplayPort (in svdm_dp_post_config, when we receive - * the config ack). - */ - if (mux_mode == USB_PD_MUX_DP_ENABLED) - usb_mux_set(port, USB_PD_MUX_NONE, USB_SWITCH_CONNECT, - polarity_rm_dts(pd_get_polarity(port))); - - payload[0] = VDO(USB_SID_DISPLAYPORT, 1, - CMD_DP_CONFIG | VDO_OPOS(opos)); - payload[1] = VDO_DP_CFG(pin_mode, /* pin mode */ - 1, /* DPv1.3 signaling */ - 2); /* UFP connected */ - return 2; -}; - -#define PORT_TO_HPD(port) ((port) ? GPIO_USB_C1_DP_HPD : GPIO_USB_C0_DP_HPD) -__override void svdm_dp_post_config(int port) -{ - /* Connect the SBU and USB lines to the connector. */ - ppc_set_sbu(port, 1); - usb_mux_set(port, svdm_dp_mux_mode(port), USB_SWITCH_CONNECT, - polarity_rm_dts(pd_get_polarity(port))); - - dp_flags[port] |= DP_FLAGS_DP_ON; - if (!(dp_flags[port] & DP_FLAGS_HPD_HI_PENDING)) - return; - - gpio_set_level(PORT_TO_HPD(port), 1); - - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} - -#endif /* CONFIG_USB_PD_ALT_MODE_DFP */ diff --git a/baseboard/guybrush/base_fw_config.h b/baseboard/guybrush/base_fw_config.h deleted file mode 100644 index 2eea7a158f..0000000000 --- a/baseboard/guybrush/base_fw_config.h +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef _GUYBRUSH_BASE_FW_CONFIG__H_ -#define _GUYBRUSH_BASE_FW_CONFIG__H_ - -#define UNINITIALIZED_FW_CONFIG 0xFFFFFFFF - -#include <stdbool.h> -#include <stdint.h> - -/* - * Takes a bit offset and bit width and returns the fw_config field at that - * offset and width. Returns -1 if an error occurs. - */ -int get_fw_config_field(uint8_t offset, uint8_t width); - -/* - * Each Guybrush board variant will define a board specific fw_config schema. - * Below is the schema agnostic interface for fw_config fields. - * Fields that are not applicable outside a specific Guybrush variant do not - * need to be included here. - */ - -enum board_usb_a1_retimer { - USB_A1_RETIMER_UNKNOWN, - USB_A1_RETIMER_PS8811, - USB_A1_RETIMER_ANX7491 -}; - -enum board_usb_c1_mux { - USB_C1_MUX_UNKNOWN, - USB_C1_MUX_PS8818, - USB_C1_MUX_ANX7451 -}; - -enum board_form_factor { - FORM_FACTOR_UNKNOWN, - FORM_FACTOR_CLAMSHELL, - FORM_FACTOR_CONVERTIBLE -}; - -bool board_has_kblight(void); -enum board_usb_a1_retimer board_get_usb_a1_retimer(void); -enum board_usb_c1_mux board_get_usb_c1_mux(void); -enum board_form_factor board_get_form_factor(void); -bool board_is_convertible(void); - -#endif /* _GUYBRUSH_BASE_FW_CONFIG__H_ */ diff --git a/baseboard/guybrush/base_gpio.inc b/baseboard/guybrush/base_gpio.inc deleted file mode 100644 index 259ccd9286..0000000000 --- a/baseboard/guybrush/base_gpio.inc +++ /dev/null @@ -1,150 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* GSC Signals */ -GPIO_INT(EC_WP_L, PIN(5, 0), GPIO_INT_BOTH, switch_interrupt) /* Write Protect Enabled */ -GPIO(CCD_MODE_ODL, PIN(C, 6), GPIO_ODR_HIGH) /* Case Closed Debug Mode */ -GPIO(EC_GSC_PACKET_MODE, PIN(B, 1), GPIO_OUT_LOW) /* GSC Packet Mode */ -ALTERNATE( PIN_MASK(6, BIT(4) | BIT(5)), 0, MODULE_UART, 0) /* UART_EC_TX_GSC_DBG_RX_R, UART_GSC_DBG_TX_EC_RX_R */ - -/* Power Signals */ -GPIO_INT(MECH_PWR_BTN_ODL, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW, power_button_interrupt) /* Mechanical Power Button */ -GPIO_INT(EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) /* Power Button */ -GPIO_INT(SLP_S3_L, PIN(6, 1), GPIO_INT_BOTH, baseboard_en_pwr_s0) /* Sleep S3 */ -GPIO_INT(SLP_S5_L, PIN(7, 2), GPIO_INT_BOTH, power_signal_interrupt) /* Sleep S5 */ -GPIO_INT(SLP_S3_S0I3_L, PIN(7, 4), GPIO_INT_BOTH, power_signal_interrupt) /* Sleep S0ix */ -GPIO_INT(PG_PWR_S5, PIN(C, 0), GPIO_INT_BOTH, baseboard_en_pwr_s0) /* S5 Power OK */ -GPIO_INT(PG_PCORE_S0_R_OD, PIN(B, 6), GPIO_INT_BOTH, power_signal_interrupt) /* S0 Power OK */ -GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) /* AC Power Present */ -GPIO_INT(EC_PCORE_INT_ODL, PIN(F, 0), GPIO_INT_BOTH | GPIO_PULL_UP, power_signal_interrupt) /* Power Core Interrupt */ -GPIO_INT(PG_GROUPC_S0_OD, PIN(A, 3), GPIO_INT_BOTH, baseboard_en_pwr_pcore_s0) /* Power Group C S0 */ -GPIO_INT(PG_LPDDR4X_S3_OD, PIN(9, 5), GPIO_INT_BOTH, baseboard_en_pwr_pcore_s0) /* Power Group LPDDR4 S3 */ -GPIO(EN_PWR_S5, PIN(B, 7), GPIO_OUT_LOW) /* Enable S5 Power */ -GPIO(EN_PWR_S0_R, PIN(F, 1), GPIO_OUT_LOW) -GPIO(EN_PWR_PCORE_S0_R, PIN(E, 1), GPIO_OUT_LOW) -ALTERNATE(/*MECH_PWR_BTN_ODL*/ PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0) /* PSL - Mechanical Power Button */ -ALTERNATE(/*LID_OPEN*/ PIN_MASK(0, BIT(2)), 0, MODULE_PMU, 0) /* PSL - Lid Open */ -ALTERNATE(/*ACOK_OD*/ PIN_MASK(0, BIT(0)), 0, MODULE_PMU, 0) /* PSL - AC Power Present */ - -/* SOC Signals */ -GPIO(EC_ENTERING_RW, PIN(6, 6), GPIO_OUT_LOW) /* Tell SOC we entered RW */ -GPIO(EC_SYS_RST_L, PIN(7, 6), GPIO_ODR_HIGH) /* Cold Reset SOC */ -GPIO(EC_SOC_RSMRST_L, PIN(C, 5), GPIO_OUT_LOW) /* Resume Reset SOC */ -GPIO(EC_CLR_CMOS, PIN(A, 1), GPIO_OUT_LOW) /* Clear SOC CMOS */ -GPIO(EC_MEM_EVENT, PIN(A, 5), GPIO_OUT_LOW) /* Memory Thermal Event to SOC*/ -GPIO(EC_SOC_PWR_BTN_L, PIN(6, 3), GPIO_OUT_HIGH) /* Power Button to SOC */ -GPIO(EC_SOC_PWR_GOOD, PIN(D, 3), GPIO_OUT_LOW) /* Power Good to SOC */ -GPIO(EC_SOC_WAKE_L, PIN(0, 3), GPIO_OUT_HIGH) /* Wake SOC */ -GPIO(EC_SOC_INT_L, PIN(8, 3), GPIO_OUT_HIGH) /* Matrix Keyboard Protocol Event to SOC */ -GPIO(PROCHOT_ODL, PIN(D, 5), GPIO_ODR_HIGH) /* Force SOC into HTC-active state */ -GPIO(SOC_ALERT_EC_L, PIN(E, 2), GPIO_INPUT) /* Sideband-Temperature Iterrupt */ -GPIO(SOC_THERMTRIP_ODL, PIN(E, 5), GPIO_INPUT) /* Temperature Trip Sensor */ - -/* USB Signals */ -GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(C, 7), GPIO_INT_FALLING, tcpc_alert_event) -GPIO_INT(USB_C0_PPC_INT_ODL, PIN(7, 5), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C1_PPC_INT_ODL, PIN(D, 4), GPIO_INT_FALLING, ppc_interrupt) -GPIO_INT(USB_C0_BC12_INT_ODL, PIN(A, 4), GPIO_INT_FALLING | GPIO_PULL_UP, bc12_interrupt) -GPIO_INT(USB_C1_BC12_INT_ODL, PIN(9, 6), GPIO_INT_FALLING | GPIO_PULL_UP, bc12_interrupt) -GPIO(USB_C0_C1_FAULT_ODL, PIN(7, 3), GPIO_ODR_HIGH) /* C0/C1 Fault to SOC */ -GPIO(USB_C0_TCPC_RST_L, PIN(3, 4), GPIO_OUT_HIGH) /* C0 TCPC Reset */ -GPIO(USB_C1_TCPC_RST_L, PIN(3, 7), GPIO_OUT_HIGH) /* C1 TCPC Reset */ -GPIO(USB_C0_HPD, PIN(F, 5), GPIO_OUT_LOW) /* C0 DP Hotplug Detect */ -GPIO(USB_C1_HPD, PIN(F, 4), GPIO_OUT_LOW) /* C1 DP Hotplug Detect */ - -/* Sensor Signals */ -GPIO(3AXIS_INT_L, PIN(A, 2), GPIO_INPUT | GPIO_PULL_DOWN) /* 3 Axis Accel */ -GPIO_INT(LID_OPEN, PIN(0, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) /* Lid Open */ -GPIO_INT(VOLDN_BTN_ODL, PIN(A, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) /* Volume Down */ -GPIO_INT(VOLUP_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) /* Volume Up */ -GPIO(EC_BATT_PRES_ODL, PIN(9, 4), GPIO_INPUT) /* Battery Present */ -ALTERNATE(/*TEMP_SOC|CHRG|MEM*/ PIN_MASK(4, BIT(3) | BIT(4) | BIT(5)), 0, MODULE_ADC, 0) /* SOC, Charger and Memory Temperature */ -ALTERNATE( PIN_MASK(4, BIT(1) | BIT(2)), 0, MODULE_ADC, 0) /* EC_ADC_CORE_IMON1, EC_ADC_SOC_IMON2 */ - -/* LED Signals */ -GPIO(EC_DISABLE_DISP_BL, PIN(A, 6), GPIO_OUT_HIGH) /* Disable Display Backlight */ - -/* Fan Signals */ -ALTERNATE( PIN_MASK(C, BIT(3)), 0, MODULE_PWM, 0) /* EC_FAN_PWM - Fan PWM */ -ALTERNATE( PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0) /* EC_FAN_SPEED - Fan Speed */ - -/* I2C Signals -- i2c pins need to be exposed as GPIO for bit banging, even though set to alternate mode below */ -GPIO(EC_I2C_USB_A0_C0_SCL, PIN(B, 5), GPIO_INPUT) -GPIO(EC_I2C_USB_A0_C0_SDA, PIN(B, 4), GPIO_INPUT) -GPIO(EC_I2C_USB_A1_C1_SCL, PIN(9, 0), GPIO_INPUT) -GPIO(EC_I2C_USB_A1_C1_SDA, PIN(8, 7), GPIO_INPUT) -GPIO(EC_I2C_BATT_SCL, PIN(9, 2), GPIO_INPUT) -GPIO(EC_I2C_BATT_SDA, PIN(9, 1), GPIO_INPUT) -GPIO(EC_I2C_USBC_MUX_SCL, PIN(D, 1), GPIO_INPUT) -GPIO(EC_I2C_USBC_MUX_SDA, PIN(D, 0), GPIO_INPUT) -GPIO(EC_I2C_POWER_SCL, PIN(F, 3), GPIO_INPUT) -GPIO(EC_I2C_POWER_SDA, PIN(F, 2), GPIO_INPUT) -GPIO(EC_I2C_CBI_SCL, PIN(3, 3), GPIO_INPUT) -GPIO(EC_I2C_CBI_SDA, PIN(3, 6), GPIO_INPUT) -GPIO(EC_I2C_SENSOR_SCL, PIN(E, 4), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2C_SENSOR_SDA, PIN(E, 3), GPIO_INPUT | GPIO_SEL_1P8V) -GPIO(EC_I2C_SOC_SIC, PIN(B, 3), GPIO_INPUT) -GPIO(EC_I2C_SOC_SID, PIN(B, 2), GPIO_INPUT) - -ALTERNATE( PIN_MASK(B, BIT(4) | BIT(5)), 0, MODULE_I2C, 0) /* I2C0 */ -ALTERNATE( PIN_MASK(9, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ -ALTERNATE( PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0) /* I2C1 SDA */ -ALTERNATE( PIN_MASK(D, BIT(0) | BIT(1)), 0, MODULE_I2C, 0) /* I2C3 */ -ALTERNATE( PIN_MASK(F, BIT(2) | BIT(3)), 0, MODULE_I2C, 0) /* I2C4 */ -ALTERNATE( PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0) /* I2C5 */ -ALTERNATE( PIN_MASK(E, BIT(3) | BIT(4)), 0, MODULE_I2C, 0) /* I2C6 */ -ALTERNATE( PIN_MASK(B, BIT(2) | BIT(3)), 0, MODULE_I2C, 0) /* I2C7 */ - -/* Keyboard Signals */ -GPIO(EN_KB_BL, PIN(9, 7), GPIO_OUT_HIGH) /* Enable Keyboard Backlight */ -ALTERNATE(/*PWM_KB_BL*/ PIN_MASK(C, BIT(2)), 0, MODULE_PWM, 0) /* Keyboard Backlight Level */ -ALTERNATE(/*KSI_00-01*/ PIN_MASK(3, BIT(0) | BIT(1)), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) -ALTERNATE(/*KSI_02-07*/ PIN_MASK(2, GENMASK(7, 2)), 0, MODULE_KEYBOARD_SCAN, GPIO_INPUT) -ALTERNATE(/*KSO_00-01*/ PIN_MASK(2, BIT(0) | BIT(1)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) -GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ -ALTERNATE(/*KSO_03-09*/ PIN_MASK(1, GENMASK(6, 0)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) -ALTERNATE(/*KSO_10-13*/ PIN_MASK(0, GENMASK(7, 4)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) -ALTERNATE(/*KSO_14*/ PIN_MASK(8, BIT(2)), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) - -/* b/186135022: Pull eSPI RST# high to disable */ -GPIO(EC_ESPI_RST_L, PIN(5, 4), GPIO_PULL_UP) - -#if 0 -/* - * SOC eSPI Bus - * These signals do not need to be explicitly configured. - * Leaving here so all signals are documented. - */ -GPIO(ESPI_SOC_CLK, PIN(5, 5), GPIO_DEFAULT) -GPIO(ESPI_SOC_CS_EC_L, PIN(5, 3), GPIO_DEFAULT) -GPIO(ESPI_SOC_D0_EC, PIN(4, 6), GPIO_DEFAULT) -GPIO(ESPI_SOC_D1_EC, PIN(4, 7), GPIO_DEFAULT) -GPIO(ESPI_SOC_D2_EC, PIN(5, 1), GPIO_DEFAULT) -GPIO(ESPI_SOC_D3_EC, PIN(5, 2), GPIO_DEFAULT) -GPIO(ESPI_EC_ALERT_SOC_L, PIN(5, 7), GPIO_DEFAULT) -#endif - -/* TCPC C0 */ -IOEX(USB_C0_TCPC_FASTSW_CTL_EN, EXPIN(USBC_PORT_C0, 0, 4), GPIO_OUT_LOW) -IOEX(USB_C0_PPC_EN_L, EXPIN(USBC_PORT_C0, 1, 0), GPIO_OUT_LOW) -IOEX(USB_C0_PPC_ILIM_3A_EN, EXPIN(USBC_PORT_C0, 1, 1), GPIO_OUT_LOW) -IOEX_INT(USB_C0_SBU_FAULT_ODL, EXPIN(USBC_PORT_C0, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt) -IOEX(EN_PP5000_USB_A0_VBUS, EXPIN(USBC_PORT_C0, 1, 5), GPIO_OUT_LOW) -IOEX(USB_A0_LIMIT_SDP, EXPIN(USBC_PORT_C0, 1, 6), GPIO_OUT_LOW) -IOEX(USB_C0_SBU_FLIP, EXPIN(USBC_PORT_C0, 1, 7), GPIO_OUT_LOW) - -/* TCPC C1 */ -IOEX(USB_A1_RETIMER_EN, EXPIN(USBC_PORT_C1, 0, 0), GPIO_OUT_LOW) -IOEX(USB_A1_RETIMER_RST, EXPIN(USBC_PORT_C1, 0, 1), GPIO_OUT_LOW) -IOEX(USB_C1_IN_HPD, EXPIN(USBC_PORT_C1, 0, 3), GPIO_OUT_LOW) -IOEX(USB_C1_TCPC_FASTSW_CTL_EN, EXPIN(USBC_PORT_C1, 0, 4), GPIO_OUT_LOW) -IOEX(USB_C1_PPC_EN_L, EXPIN(USBC_PORT_C1, 1, 0), GPIO_OUT_LOW) -IOEX(USB_C1_PPC_ILIM_3A_EN, EXPIN(USBC_PORT_C1, 1, 1), GPIO_OUT_LOW) -IOEX_INT(USB_C1_SBU_FAULT_ODL, EXPIN(USBC_PORT_C1, 1, 2), GPIO_INT_FALLING, sbu_fault_interrupt) -IOEX(EN_PP5000_USB_A1_VBUS_DB, EXPIN(USBC_PORT_C1, 1, 5), GPIO_OUT_LOW) -IOEX(USB_A1_LIMIT_SDP_DB, EXPIN(USBC_PORT_C1, 1, 6), GPIO_OUT_LOW) diff --git a/baseboard/guybrush/baseboard.c b/baseboard/guybrush/baseboard.c deleted file mode 100644 index 344ea459de..0000000000 --- a/baseboard/guybrush/baseboard.c +++ /dev/null @@ -1,894 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Guybrush family-specific configuration */ - -#include "cros_board_info.h" -#include "base_fw_config.h" -#include "battery_fuel_gauge.h" -#include "charge_manager.h" -#include "charge_ramp.h" -#include "charge_state_v2.h" -#include "charge_state.h" -#include "charger.h" -#include "chip/npcx/ps2_chip.h" -#include "chip/npcx/pwm_chip.h" -#include "chipset.h" -#include "driver/ppc/aoz1380.h" -#include "driver/ppc/nx20p348x.h" -#include "driver/retimer/anx7491.h" -#include "driver/retimer/ps8811.h" -#include "driver/retimer/ps8818.h" -#include "driver/tcpm/nct38xx.h" -#include "driver/usb_mux/anx7451.h" -#include "driver/usb_mux/amd_fp6.h" -#include "fan.h" -#include "fan_chip.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "ioexpander.h" -#include "isl9241.h" -#include "keyboard_scan.h" -#include "nct38xx.h" -#include "pi3usb9201.h" -#include "power.h" -#include "pwm.h" -#include "usb_mux.h" -#include "usb_pd_tcpm.h" -#include "usbc_ppc.h" - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -static void reset_nct38xx_port(int port); - -/* Wake Sources */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* Power Signal Input List */ -const struct power_signal_info power_signal_list[] = { - [X86_SLP_S0_N] = { - .gpio = GPIO_PCH_SLP_S0_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S0_DEASSERTED", - }, - [X86_SLP_S3_N] = { - .gpio = GPIO_PCH_SLP_S3_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S3_DEASSERTED", - }, - [X86_SLP_S5_N] = { - .gpio = GPIO_PCH_SLP_S5_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S5_DEASSERTED", - }, - [X86_S0_PGOOD] = { - .gpio = GPIO_S0_PGOOD, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "S0_PGOOD", - }, - [X86_S5_PGOOD] = { - .gpio = GPIO_S5_PGOOD, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "S5_PGOOD", - }, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -const struct i2c_port_t i2c_ports[] = { - { - .name = "tcpc0", - .port = I2C_PORT_TCPC0, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A0_C0_SCL, - .sda = GPIO_EC_I2C_USB_A0_C0_SDA, - }, - { - .name = "tcpc1", - .port = I2C_PORT_TCPC1, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A1_C1_SCL, - .sda = GPIO_EC_I2C_USB_A1_C1_SDA, - }, - { - .name = "battery", - .port = I2C_PORT_BATTERY, - .kbps = 100, - .scl = GPIO_EC_I2C_BATT_SCL, - .sda = GPIO_EC_I2C_BATT_SDA, - }, - { - .name = "usb_mux", - .port = I2C_PORT_USB_MUX, - .kbps = 400, - .scl = GPIO_EC_I2C_USBC_MUX_SCL, - .sda = GPIO_EC_I2C_USBC_MUX_SDA, - }, - { - .name = "charger", - .port = I2C_PORT_CHARGER, - .kbps = 400, - .scl = GPIO_EC_I2C_POWER_SCL, - .sda = GPIO_EC_I2C_POWER_SDA, - }, - { - .name = "eeprom", - .port = I2C_PORT_EEPROM, - .kbps = 400, - .scl = GPIO_EC_I2C_CBI_SCL, - .sda = GPIO_EC_I2C_CBI_SDA, - }, - { - .name = "sensor", - .port = I2C_PORT_SENSOR, - .kbps = 400, - .scl = GPIO_EC_I2C_SENSOR_SCL, - .sda = GPIO_EC_I2C_SENSOR_SDA, - }, - { - .name = "soc_thermal", - .port = I2C_PORT_THERMAL_AP, - .kbps = 400, - .scl = GPIO_EC_I2C_SOC_SIC, - .sda = GPIO_EC_I2C_SOC_SID, - }, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - - - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL9241_ADDR_FLAGS, - .drv = &isl9241_drv, - }, -}; - -const struct tcpc_config_t tcpc_config[] = { - [USBC_PORT_C0] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - }, - .drv = &nct38xx_tcpm_drv, - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, - [USBC_PORT_C1] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC1, - .addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - }, - .drv = &nct38xx_tcpm_drv, - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT); -BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT); - -const int usb_port_enable[USBA_PORT_COUNT] = { - IOEX_EN_PP5000_USB_A0_VBUS, - IOEX_EN_PP5000_USB_A1_VBUS_DB, -}; - -static void baseboard_interrupt_init(void) -{ - /* Enable Power Group interrupts. */ - gpio_enable_interrupt(GPIO_PG_GROUPC_S0_OD); - gpio_enable_interrupt(GPIO_PG_LPDDR4X_S3_OD); - - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL); - - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL); - - /* Enable BC 1.2 interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL); - - /* Enable SBU fault interrupts */ - ioex_enable_interrupt(IOEX_USB_C0_SBU_FAULT_ODL); - ioex_enable_interrupt(IOEX_USB_C1_SBU_FAULT_ODL); -} -DECLARE_HOOK(HOOK_INIT, baseboard_interrupt_init, HOOK_PRIO_INIT_I2C + 1); - -struct ppc_config_t ppc_chips[] = { - [USBC_PORT_C0] = { - /* Device does not talk I2C */ - .drv = &aoz1380_drv - }, - - [USBC_PORT_C1] = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = NX20P3483_ADDR1_FLAGS, - .drv = &nx20p348x_drv - }, -}; -BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT); -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = { - [USBC_PORT_C0] = { - .i2c_port = I2C_PORT_TCPC0, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, - - [USBC_PORT_C1] = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT); - -/* - * .init is not necessary here because it has nothing - * to do. Primary mux will handle mux state so .get is - * not needed as well. usb_mux.c can handle the situation - * properly. - */ -static int fsusb42umx_set_mux(const struct usb_mux*, mux_state_t, bool *); -struct usb_mux_driver usbc0_sbu_mux_driver = { - .set = fsusb42umx_set_mux, -}; - -/* - * Since FSUSB42UMX is not a i2c device, .i2c_port and - * .i2c_addr_flags are not required here. - */ -struct usb_mux usbc0_sbu_mux = { - .usb_port = USBC_PORT_C0, - .driver = &usbc0_sbu_mux_driver, -}; - -__overridable int board_c1_ps8818_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - CPRINTSUSB("C1: PS8818 mux using default tuning"); - return 0; -} - -struct usb_mux usbc1_ps8818 = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_TCPC1, - .flags = USB_MUX_FLAG_RESETS_IN_G3, - .i2c_addr_flags = PS8818_I2C_ADDR_FLAGS, - .driver = &ps8818_usb_retimer_driver, - .board_set = &board_c1_ps8818_mux_set, -}; - -__overridable int board_c1_anx7451_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - CPRINTSUSB("C1: ANX7451 mux using default tuning"); - return 0; -} - -struct usb_mux usbc1_anx7451 = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_TCPC1, - .flags = USB_MUX_FLAG_RESETS_IN_G3, - .i2c_addr_flags = ANX7491_I2C_ADDR3_FLAGS, - .driver = &anx7451_usb_mux_driver, - .board_set = &board_c1_anx7451_mux_set, -}; - -struct usb_mux usb_muxes[] = { - [USBC_PORT_C0] = { - .usb_port = USBC_PORT_C0, - .i2c_port = I2C_PORT_USB_MUX, - .i2c_addr_flags = AMD_FP6_C0_MUX_I2C_ADDR, - .driver = &amd_fp6_usb_mux_driver, - .next_mux = &usbc0_sbu_mux, - }, - [USBC_PORT_C1] = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_USB_MUX, - .i2c_addr_flags = AMD_FP6_C4_MUX_I2C_ADDR, - .driver = &amd_fp6_usb_mux_driver, - /* .next_mux = filled in by setup_mux based on fw_config */ - } -}; -BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT); - -struct ioexpander_config_t ioex_config[] = { - [USBC_PORT_C0] = { - .i2c_host_port = I2C_PORT_TCPC0, - .i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - .drv = &nct38xx_ioexpander_drv, - }, - [USBC_PORT_C1] = { - .i2c_host_port = I2C_PORT_TCPC1, - .i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - .drv = &nct38xx_ioexpander_drv, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(ioex_config) == USBC_PORT_COUNT); -BUILD_ASSERT(CONFIG_IO_EXPANDER_PORT_COUNT == USBC_PORT_COUNT); - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* - * F3 key scan cycle completed but scan input is not - * charging to logic high when EC start scan next - * column for "T" key, so we set .output_settle_us - * to 80us - */ - .output_settle_us = 80, - .debounce_down_us = 6 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 1500, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = SECOND, - .actual_key_mask = { - 0x3c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -const struct pwm_t pwm_channels[] = { - [PWM_CH_FAN] = { - .channel = 0, - .flags = PWM_CONFIG_OPEN_DRAIN, - .freq = 25000, - }, - [PWM_CH_KBLIGHT] = { - .channel = 1, - .flags = PWM_CONFIG_DSLEEP, - .freq = 100, - }, - [PWM_CH_LED_CHRG] = { - .channel = 2, - .flags = PWM_CONFIG_DSLEEP, - .freq = 100, - }, - [PWM_CH_LED_FULL] = { - .channel = 3, - .flags = PWM_CONFIG_DSLEEP, - .freq = 100, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -const struct mft_t mft_channels[] = { - [MFT_CH_0] = { - .module = NPCX_MFT_MODULE_1, - .clk_src = TCKC_LFCLK, - .pwm_id = PWM_CH_FAN, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); - -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ - .pgood_gpio = GPIO_S0_PGOOD, - .enable_gpio = -1, -}; -const struct fan_rpm fan_rpm_0 = { - .rpm_min = 1000, - .rpm_start = 1000, - .rpm_max = 6500, -}; -const struct fan_t fans[] = { - [FAN_CH_0] = { - .conf = &fan_conf_0, - .rpm = &fan_rpm_0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); - -/* - * USB C0 port SBU mux use standalone FSUSB42UMX - * chip and it needs a board specific driver. - * Overall, it will use chained mux framework. - */ -static int fsusb42umx_set_mux(const struct usb_mux *me, mux_state_t mux_state, - bool *ack_required) -{ - /* This driver does not use host command ACKs */ - *ack_required = false; - - if (mux_state & USB_PD_MUX_POLARITY_INVERTED) - ioex_set_level(IOEX_USB_C0_SBU_FLIP, 1); - else - ioex_set_level(IOEX_USB_C0_SBU_FLIP, 0); - - return EC_SUCCESS; -} - -static void setup_mux(void) -{ - switch (board_get_usb_c1_mux()) { - case USB_C1_MUX_PS8818: - CPRINTSUSB("C1: Setting PS8818 mux"); - usb_muxes[USBC_PORT_C1].next_mux = &usbc1_ps8818; - break; - case USB_C1_MUX_ANX7451: - CPRINTSUSB("C1: Setting ANX7451 mux"); - usb_muxes[USBC_PORT_C1].next_mux = &usbc1_anx7451; - break; - default: - CPRINTSUSB("C1: Mux is unknown"); - } -} -DECLARE_HOOK(HOOK_INIT, setup_mux, HOOK_PRIO_INIT_I2C); - -int board_set_active_charge_port(int port) -{ - int is_valid_port = (port >= 0 && - port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - int cur_port = charge_manager_get_active_charge_port(); - - if (port == CHARGE_PORT_NONE) { - CPRINTSUSB("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * If this port had booted in dead battery mode, go - * ahead and reset it so EN_SNK responds properly. - */ - if (nct38xx_get_boot_type(i) == - NCT38XX_BOOT_DEAD_BATTERY) { - reset_nct38xx_port(cur_port); - pd_set_error_recovery(i); - } - - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } else if (!is_valid_port) { - return EC_ERROR_INVAL; - } - - - /* Check if the port is sourcing VBUS. */ - if (tcpm_get_src_ctrl(port)) { - CPRINTSUSB("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - /* - * Disallow changing ports if we booted in dead battery mode and don't - * have sufficient power to withstand Vbus loss. The NCT3807 may - * continue to keep EN_SNK low on the original port and allow a - * dangerous level of voltage to pass through to the initial charge - * port (see b/183660105) - * - * If we do have sufficient power, then reset the dead battery port and - * set up Type-C error recovery on its connection. - */ - if (cur_port != CHARGE_PORT_NONE && - port != cur_port && - nct38xx_get_boot_type(cur_port) == - NCT38XX_BOOT_DEAD_BATTERY) { - if (pd_is_battery_capable()) { - reset_nct38xx_port(cur_port); - pd_set_error_recovery(cur_port); - } else { - CPRINTSUSB("Battery too low for charge port change"); - return EC_ERROR_INVAL; - } - } - - CPRINTSUSB("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTSUSB("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -int board_is_i2c_port_powered(int port) -{ - switch (port) { - case I2C_PORT_USB_MUX: - case I2C_PORT_SENSOR: - /* USB mux and sensor i2c bus is unpowered in Z1 */ - return chipset_in_state(CHIPSET_STATE_HARD_OFF) ? 0 : 1; - case I2C_PORT_THERMAL_AP: - /* SOC thermal i2c bus is unpowered in S0i3/S3/S5/Z1 */ - return chipset_in_state(CHIPSET_STATE_ANY_OFF | - CHIPSET_STATE_ANY_SUSPEND) ? 0 : 1; - default: - return 1; - } -} - -/* - * In the AOZ1380 PPC, there are no programmable features. We use - * the attached NCT3807 to control a GPIO to indicate 1A5 or 3A0 - * current limits. - */ -int board_aoz1380_set_vbus_source_current_limit(int port, - enum tcpc_rp_value rp) -{ - int rv; - - /* Use the TCPC to set the current limit */ - rv = ioex_set_level(IOEX_USB_C0_PPC_ILIM_3A_EN, - (rp == TYPEC_RP_3A0) ? 1 : 0); - - return rv; -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} - -void sbu_fault_interrupt(enum ioex_signal signal) -{ - int port = (signal == IOEX_USB_C0_SBU_FAULT_ODL) ? 0 : 1; - - pd_handle_overcurrent(port); -} - -static void set_ac_prochot(void) -{ - isl9241_set_ac_prochot(CHARGER_SOLO, GUYBRUSH_AC_PROCHOT_CURRENT_MA); -} -DECLARE_HOOK(HOOK_INIT, set_ac_prochot, HOOK_PRIO_DEFAULT); - -void tcpc_alert_event(enum gpio_signal signal) -{ - int port; - - switch (signal) { - case GPIO_USB_C0_TCPC_INT_ODL: - port = 0; - break; - case GPIO_USB_C1_TCPC_INT_ODL: - port = 1; - break; - default: - return; - } - - schedule_deferred_pd_interrupt(port); -} - -static void reset_nct38xx_port(int port) -{ - enum gpio_signal reset_gpio_l; - - if (port == USBC_PORT_C0) - reset_gpio_l = GPIO_USB_C0_TCPC_RST_L; - else if (port == USBC_PORT_C1) - reset_gpio_l = GPIO_USB_C1_TCPC_RST_L; - else - /* Invalid port: do nothing */ - return; - - gpio_set_level(reset_gpio_l, 0); - msleep(NCT38XX_RESET_HOLD_DELAY_MS); - gpio_set_level(reset_gpio_l, 1); - nct38xx_reset_notify(port); - if (NCT3807_RESET_POST_DELAY_MS != 0) - msleep(NCT3807_RESET_POST_DELAY_MS); -} - - -void board_reset_pd_mcu(void) -{ - /* Reset TCPC0 */ - reset_nct38xx_port(USBC_PORT_C0); - - /* Reset TCPC1 */ - reset_nct38xx_port(USBC_PORT_C1); -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - /* - * Check which port has the ALERT line set and ignore if that TCPC has - * its reset line active. - */ - if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C0_TCPC_RST_L) != 0) - status |= PD_STATUS_TCPC_ALERT_0; - } - - if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C1_TCPC_RST_L) != 0) - status |= PD_STATUS_TCPC_ALERT_1; - } - - return status; -} - -void ppc_interrupt(enum gpio_signal signal) -{ - switch (signal) { - case GPIO_USB_C0_PPC_INT_ODL: - aoz1380_interrupt(USBC_PORT_C0); - break; - - case GPIO_USB_C1_PPC_INT_ODL: - nx20p348x_interrupt(USBC_PORT_C1); - break; - - default: - break; - } -} - -void bc12_interrupt(enum gpio_signal signal) -{ - switch (signal) { - case GPIO_USB_C0_BC12_INT_ODL: - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); - break; - - case GPIO_USB_C1_BC12_INT_ODL: - task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12); - break; - - default: - break; - } -} - -/** - * Return if VBUS is sagging too low - */ -int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state) -{ - int voltage = 0; - int rv; - - rv = charger_get_vbus_voltage(port, &voltage); - - if (rv) { - CPRINTSUSB("%s rv=%d", __func__, rv); - return 0; - } - - /* - * b/168569046: The ISL9241 sometimes incorrectly reports 0 for unknown - * reason, causing ramp to stop at 0.5A. Workaround this by ignoring 0. - * This partly defeats the point of ramping, but will still catch - * VBUS below 4.5V and above 0V. - */ - if (voltage == 0) { - CPRINTSUSB("%s vbus=0", __func__); - return 0; - } - - if (voltage < BC12_MIN_VOLTAGE) - CPRINTSUSB("%s vbus=%d", __func__, voltage); - - return voltage < BC12_MIN_VOLTAGE; -} - -/** - * b/175324615: On G3->S5, wait for RSMRST_L to be deasserted before asserting - * PCH_PWRBTN_L. - */ -void board_pwrbtn_to_pch(int level) -{ - timestamp_t start; - const uint32_t timeout_rsmrst_rise_us = 30 * MSEC; - - /* Add delay for G3 exit if asserting PWRBTN_L and RSMRST_L is low. */ - if (!level && !gpio_get_level(GPIO_PCH_RSMRST_L)) { - start = get_time(); - do { - usleep(200); - if (gpio_get_level(GPIO_PCH_RSMRST_L)) - break; - } while (time_since32(start) < timeout_rsmrst_rise_us); - - if (!gpio_get_level(GPIO_PCH_RSMRST_L)) - ccprints("Error pwrbtn: RSMRST_L still low"); - - msleep(G3_TO_PWRBTN_DELAY_MS); - } - gpio_set_level(GPIO_PCH_PWRBTN_L, level); -} - -void board_hibernate(void) -{ - int port; - - /* - * If we are charging, then drop the Vbus level down to 5V to ensure - * that we don't get locked out of the 6.8V OVLO for our PPCs in - * dead-battery mode. This is needed when the TCPC/PPC rails go away. - * (b/79218851, b/143778351, b/147007265) - */ - port = charge_manager_get_active_charge_port(); - if (port != CHARGE_PORT_NONE) { - pd_request_source_voltage(port, SAFE_RESET_VBUS_MV); - - /* Give PD task and PPC chip time to get to 5V */ - msleep(SAFE_RESET_VBUS_DELAY_MS); - } - - /* Try to put our battery fuel gauge into sleep mode */ - if (battery_sleep_fuel_gauge() != EC_SUCCESS) - cprints(CC_SYSTEM, "Failed to send battery sleep command"); -} - -__overridable enum ec_error_list -board_a1_ps8811_retimer_init(const struct usb_mux *me) -{ - return EC_SUCCESS; -} - -static int baseboard_a1_ps8811_retimer_init(const struct usb_mux *me) -{ - int rv; - int tries = 2; - - do { - int val; - - rv = ps8811_i2c_read(me, PS8811_REG_PAGE1, - PS8811_REG1_USB_BEQ_LEVEL, &val); - } while (rv && --tries); - - if (rv) { - CPRINTSUSB("A1: PS8811 retimer not detected!"); - return rv; - } - CPRINTSUSB("A1: PS8811 retimer detected"); - rv = board_a1_ps8811_retimer_init(me); - if (rv) - CPRINTSUSB("A1: Error during PS8811 setup rv:%d", rv); - return rv; -} - -/* PS8811 is just a type-A USB retimer, reusing mux structure for convience. */ -const struct usb_mux usba1_ps8811 = { - .usb_port = USBA_PORT_A1, - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = PS8811_I2C_ADDR_FLAGS3, - .board_init = &baseboard_a1_ps8811_retimer_init, -}; - -__overridable enum ec_error_list -board_a1_anx7491_retimer_init(const struct usb_mux *me) -{ - return EC_SUCCESS; -} - -static int baseboard_a1_anx7491_retimer_init(const struct usb_mux *me) -{ - int rv; - int tries = 2; - - do { - int val; - - rv = i2c_read8(me->i2c_port, me->i2c_addr_flags, 0, &val); - } while (rv && --tries); - if (rv) { - CPRINTSUSB("A1: ANX7491 retimer not detected!"); - return rv; - } - CPRINTSUSB("A1: ANX7491 retimer detected"); - rv = board_a1_anx7491_retimer_init(me); - if (rv) - CPRINTSUSB("A1: Error during ANX7491 setup rv:%d", rv); - return rv; -} - -/* ANX7491 is just a type-A USB retimer, reusing mux structure for convience. */ -const struct usb_mux usba1_anx7491 = { - .usb_port = USBA_PORT_A1, - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = ANX7491_I2C_ADDR0_FLAGS, - .board_init = &baseboard_a1_anx7491_retimer_init, -}; - -void baseboard_a1_retimer_setup(void) -{ - struct usb_mux a1_retimer; - switch (board_get_usb_a1_retimer()) { - case USB_A1_RETIMER_ANX7491: - a1_retimer = usba1_anx7491; - break; - case USB_A1_RETIMER_PS8811: - a1_retimer = usba1_ps8811; - break; - default: - CPRINTSUSB("A1: Unknown retimer!"); - return; - } - a1_retimer.board_init(&a1_retimer); -} -DECLARE_DEFERRED(baseboard_a1_retimer_setup); - -static void baseboard_chipset_suspend(void) -{ - /* Disable display and keyboard backlights. */ - gpio_set_level(GPIO_EC_DISABLE_DISP_BL, 1); - ioex_set_level(IOEX_USB_A1_RETIMER_EN, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, baseboard_chipset_suspend, - HOOK_PRIO_DEFAULT); - -static void baseboard_chipset_resume(void) -{ - /* Enable display and keyboard backlights. */ - gpio_set_level(GPIO_EC_DISABLE_DISP_BL, 0); - ioex_set_level(IOEX_USB_A1_RETIMER_EN, 1); - /* Some retimers take several ms to be ready, so defer setup call */ - hook_call_deferred(&baseboard_a1_retimer_setup_data, 20 * MSEC); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, baseboard_chipset_resume, HOOK_PRIO_DEFAULT); - -void board_overcurrent_event(int port, int is_overcurrented) -{ - switch (port) { - case USBC_PORT_C0: - case USBC_PORT_C1: - gpio_set_level(GPIO_USB_C0_C1_FAULT_ODL, !is_overcurrented); - break; - - default: - break; - } -} - -void baseboard_en_pwr_pcore_s0(enum gpio_signal signal) -{ - - /* EC must AND signals PG_LPDDR4X_S3_OD and PG_GROUPC_S0_OD */ - gpio_set_level(GPIO_EN_PWR_PCORE_S0_R, - gpio_get_level(GPIO_PG_LPDDR4X_S3_OD) && - gpio_get_level(GPIO_PG_GROUPC_S0_OD)); -} - -void baseboard_en_pwr_s0(enum gpio_signal signal) -{ - - /* EC must AND signals SLP_S3_L and PG_PWR_S5 */ - gpio_set_level(GPIO_EN_PWR_S0_R, - gpio_get_level(GPIO_SLP_S3_L) && - gpio_get_level(GPIO_PG_PWR_S5)); - - /* Now chain off to the normal power signal interrupt handler. */ - power_signal_interrupt(signal); -} diff --git a/baseboard/guybrush/baseboard.h b/baseboard/guybrush/baseboard.h deleted file mode 100644 index ef1338c5d5..0000000000 --- a/baseboard/guybrush/baseboard.h +++ /dev/null @@ -1,373 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Guybrush baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* NPCX9 config */ -#define CONFIG_PORT80_4_BYTE -#define NPCX9_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ - -/* Optional features */ -#define CONFIG_ASSERT_CCD_MODE_ON_DTS_CONNECT -#define CONFIG_LTO /* Link-Time Optimizations to reduce code size */ -#define CONFIG_I2C_DEBUG /* Print i2c traces */ -#define CONFIG_CMD_S5_TIMEOUT /* Allow a user-specified timeout to exit S5 */ - -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Vboot Config */ -#define CONFIG_CRC8 -#define CONFIG_VBOOT_EFS2 -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_PACKET_MODE_EN GPIO_EC_GSC_PACKET_MODE - -/* CBI Config */ -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI - -/* Power Config */ -#define CONFIG_CHIPSET_X86_RSMRST_DELAY -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 200 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_HIBERNATE_PSL -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_TO_PCH_CUSTOM -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define G3_TO_PWRBTN_DELAY_MS 16 -#define GPIO_AC_PRESENT GPIO_ACOK_OD -#define GPIO_EN_PWR_A GPIO_EN_PWR_S5 -#define GPIO_PCH_PWRBTN_L GPIO_EC_SOC_PWR_BTN_L -#define GPIO_PCH_RSMRST_L GPIO_EC_SOC_RSMRST_L -#define GPIO_PCH_SLP_S0_L GPIO_SLP_S3_S0I3_L -#define GPIO_PCH_SLP_S3_L GPIO_SLP_S3_L -#define GPIO_PCH_SLP_S5_L GPIO_SLP_S5_L -#define GPIO_PCH_SYS_PWROK GPIO_EC_SOC_PWR_GOOD -#define GPIO_PCH_WAKE_L GPIO_EC_SOC_WAKE_L -#define GPIO_POWER_BUTTON_L GPIO_MECH_PWR_BTN_ODL -#define GPIO_S0_PGOOD GPIO_PG_PCORE_S0_R_OD -#define GPIO_S5_PGOOD GPIO_PG_PWR_S5 -#define GPIO_SYS_RESET_L GPIO_EC_SYS_RST_L -#define SAFE_RESET_VBUS_DELAY_MS 900 -#define SAFE_RESET_VBUS_MV 5000 -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -/* Thermal Config */ -#define CONFIG_ADC -#define CONFIG_AMD_SB_RMI -#define CONFIG_AMD_STT -#define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B -#define CONFIG_THROTTLE_AP -#define CONFIG_TEMP_SENSOR_SB_TSI -#define CONFIG_TEMP_SENSOR_TMP112 -#define CONFIG_THERMISTOR -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_ODL - -/* Flash Config */ -/* See config_chip-npcx9.h for SPI flash configuration */ -#undef CONFIG_SPI_FLASH /* Don't enable external flash interface */ -#define GPIO_WP_L GPIO_EC_WP_L - -/* Host communication */ -#define CONFIG_CMD_CHARGEN -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO_AND_HOST_EVENT -#define GPIO_EC_INT_L GPIO_EC_SOC_INT_L - -/* Chipset config */ -#define CONFIG_CHIPSET_CEZANNE -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_CHIPSET_RESET_HOOK - -/* Keyboard Config */ -#define CONFIG_KEYBOARD_BACKLIGHT - -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_VIVALDI -#define GPIO_EN_KEYBOARD_BACKLIGHT GPIO_EN_KB_BL -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV - -/* Sensors */ -#ifdef HAS_TASK_MOTIONSENSE - -#define CONFIG_TABLET_MODE -#define CONFIG_GMR_TABLET_MODE -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT -#define CONFIG_LID_ANGLE -#define CONFIG_LID_ANGLE_UPDATE -#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL -#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL - -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is a power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -/* Sensors without hardware FIFO are in forced mode */ -#define CONFIG_ACCEL_FORCE_MODE_MASK (1 << LID_ACCEL) -#endif /* HAS_TASK_MOTIONSENSE */ - -/* Backlight config */ -#define CONFIG_BACKLIGHT_LID -#define CONFIG_BACKLIGHT_LID_ACTIVE_LOW -#define GPIO_ENABLE_BACKLIGHT_L GPIO_EC_DISABLE_DISP_BL - -/* Battery Config */ -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_ODL -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART -#define CONFIG_BATTERY_V2 -#define CONFIG_BATTERY_COUNT 1 -#define CONFIG_HOSTCMD_BATTERY_V2 -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* Charger Config */ -#define CONFIG_CHARGER -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_ISL9241 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 - -/* - * EC will boot AP to depthcharge if: (BAT >= 2%) || (AC >= 50W) - * CONFIG_CHARGER_LIMIT_* is not set, so there is no additional restriction on - * Depthcharge to boot OS. - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 50000 - -/* - * We would prefer to use CONFIG_CHARGE_RAMP_HW to enable legacy BC1.2 charging - * but that feature of ISL9241 is broken (b/160287056) so we have to use - * CONFIG_CHARGE_RAMP_SW instead. - */ -#define CONFIG_CHARGE_RAMP_SW - -/* USB Type C and USB PD config */ -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_DRP_ACC_TRYSRC -/* TODO: Enable TCPMv2 Fast Role Swap (FRS) */ -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_CMD_TCPC_DUMP -#define CONFIG_USB_CHARGER -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_5V_EN_CUSTOM -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DP_HPD_GPIO -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_NCT38XX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USBC_PPC -#define CONFIG_USBC_PPC_SBU -#define CONFIG_USBC_PPC_AOZ1380 -#define CONFIG_USBC_RETIMER_PI3HDX1204 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USBC_PPC_NX20P3483 -#define CONFIG_USBC_RETIMER_PS8811 -#define CONFIG_USBC_RETIMER_PS8818 -#define CONFIG_USB_MUX_RUNTIME_CONFIG -#define CONFIG_USB_MUX_AMD_FP6 - -#define GPIO_USB_C0_DP_HPD GPIO_USB_C0_HPD -#define GPIO_USB_C1_DP_HPD GPIO_USB_C1_HPD - -#define CONFIG_IO_EXPANDER -#define CONFIG_IO_EXPANDER_NCT38XX -#define CONFIG_IO_EXPANDER_PORT_COUNT USBC_PORT_COUNT - -/* TODO(b/176988382): Tune values for guybrush */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ - -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_CURRENT_MA 5000 -#define PD_MAX_VOLTAGE_MV 20000 -/* Max Power = 100 W */ -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) - -/* USB-A config */ -#define USB_PORT_COUNT USBA_PORT_COUNT -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP -#define CONFIG_USB_PORT_POWER_SMART_INVERTED - -#define GPIO_USB1_ILIM_SEL IOEX_USB_A0_LIMIT_SDP -#define GPIO_USB2_ILIM_SEL IOEX_USB_A1_LIMIT_SDP_DB - -/* Round up 3250 max current to multiple of 128mA for ISL9241 AC prochot. */ -#define GUYBRUSH_AC_PROCHOT_CURRENT_MA 3328 - -/* - * USB ID - This is allocated specifically for Guybrush - */ -#define CONFIG_USB_PID 0x504D - -/* BC 1.2 */ -/* - * For legacy BC1.2 charging with CONFIG_CHARGE_RAMP_SW, ramp up input current - * until voltage drops to 4.5V. Don't go lower than this to be kind to the - * charger (see b/67964166). - */ -#define BC12_MIN_VOLTAGE 4500 - -/* I2C Bus Configuration */ -#define CONFIG_I2C -#define CONFIG_I2C_BUS_MAY_BE_UNPOWERED -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_UPDATE_IF_CHANGED -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT1_0 -#define I2C_PORT_BATTERY NPCX_I2C_PORT2_0 -#define I2C_PORT_USB_MUX NPCX_I2C_PORT3_0 -#define I2C_PORT_POWER NPCX_I2C_PORT4_1 -#define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_EEPROM NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT6_1 -#define I2C_PORT_THERMAL_AP NPCX_I2C_PORT7_0 -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -/* Volume Button Config */ -#define CONFIG_VOLUME_BUTTONS -#define GPIO_VOLUME_UP_L GPIO_VOLUP_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_VOLDN_BTN_ODL - -/* Fan Config */ -#define CONFIG_FANS FAN_CH_COUNT -/* TODO: Set CONFIG_FAN_INIT_SPEED, defaults to 100 */ - -/* LED Config */ -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -/* Power input signals */ -enum power_signal { - X86_SLP_S0_N, /* SOC -> SLP_S3_S0I3_L */ - X86_SLP_S3_N, /* SOC -> SLP_S3_L */ - X86_SLP_S5_N, /* SOC -> SLP_S5_L */ - - X86_S0_PGOOD, /* PMIC -> S0_PWROK_OD */ - X86_S5_PGOOD, /* PMIC -> S5_PWROK */ - - /* Number of X86 signals */ - POWER_SIGNAL_COUNT, -}; - -/* USB-C ports */ -enum usbc_port { - USBC_PORT_C0 = 0, - USBC_PORT_C1, - USBC_PORT_COUNT -}; - -/* USB-A ports */ -enum usba_port { - USBA_PORT_A0 = 0, - USBA_PORT_A1, - USBA_PORT_COUNT -}; - -/* TMP112 sensors */ -enum tmp112_sensor { - TMP112_SOC, - TMP112_AMB, - TMP112_COUNT, -}; - -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT -}; - -/* PWM Channels */ -enum pwm_channel { - PWM_CH_FAN = 0, - PWM_CH_KBLIGHT, - PWM_CH_LED_CHRG, - PWM_CH_LED_FULL, - PWM_CH_COUNT -}; - -/* Fan Channels */ -enum fan_channel { - FAN_CH_0 = 0, - /* Number of FAN channels */ - FAN_CH_COUNT, -}; -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -/* Common definition for the USB PD interrupt handlers. */ -void tcpc_alert_event(enum gpio_signal signal); -void bc12_interrupt(enum gpio_signal signal); -void ppc_interrupt(enum gpio_signal signal); -void sbu_fault_interrupt(enum ioex_signal signal); - -void baseboard_en_pwr_pcore_s0(enum gpio_signal signal); -void baseboard_en_pwr_s0(enum gpio_signal signal); - -int board_get_soc_temp_k(int idx, int *temp_k); - -/* CBI utility functions */ -uint32_t get_sku_id(void); -uint32_t get_board_version(void); -uint32_t get_fw_config(void); -/* Board callback after CBI has been initialized */ -__overridable void board_cbi_init(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/guybrush/build.mk b/baseboard/guybrush/build.mk deleted file mode 100644 index 976ff2c931..0000000000 --- a/baseboard/guybrush/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Guybrush baseboard specific files build -# - -CHIP:=npcx -CHIP_FAMILY:=npcx9 -CHIP_VARIANT:=npcx9m3f - -baseboard-y=baseboard.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o -baseboard-$(CONFIG_CBI_EEPROM)+=cbi.o
\ No newline at end of file diff --git a/baseboard/guybrush/cbi.c b/baseboard/guybrush/cbi.c deleted file mode 100644 index 6d66b826dc..0000000000 --- a/baseboard/guybrush/cbi.c +++ /dev/null @@ -1,96 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Guybrush CrOS Board Info(CBI) utilities */ - -#include "base_fw_config.h" -#include "console.h" -#include "common.h" -#include "cros_board_info.h" -#include "hooks.h" - -uint32_t get_sku_id(void) -{ - static uint32_t sku_id; - - if (sku_id == 0) { - uint32_t val; - - if (cbi_get_sku_id(&val) != EC_SUCCESS) - return 0; - sku_id = val; - } - return sku_id; -} - -uint32_t get_board_version(void) -{ - static uint32_t board_version; - - if (board_version == 0) { - uint32_t val; - - if (cbi_get_board_version(&val) != EC_SUCCESS) - return -1; - board_version = val; - } - return board_version; -} - -uint32_t get_fw_config(void) -{ - static uint32_t fw_config = UNINITIALIZED_FW_CONFIG; - - if (fw_config == UNINITIALIZED_FW_CONFIG) { - uint32_t val; - - if (cbi_get_fw_config(&val) != EC_SUCCESS) - return UNINITIALIZED_FW_CONFIG; - fw_config = val; - } - return fw_config; -} - - -int get_fw_config_field(uint8_t offset, uint8_t width) -{ - uint32_t fw_config = get_fw_config(); - - if (fw_config == UNINITIALIZED_FW_CONFIG) - return -1; - - return (fw_config >> offset) & ((1 << width) - 1); -} - - -__overridable void board_cbi_init(void) -{ -} - -static void cbi_init(void) -{ - uint32_t board_ver = get_board_version(); - uint32_t sku_id = get_sku_id(); - uint32_t fw_config = get_fw_config(); - - if (board_ver != 0) - ccprints("Board Version: %d (0x%x)", board_ver, board_ver); - else - ccprints("Board Version: not set in cbi"); - - if (sku_id != 0) - ccprints("SKU ID: %d (0x%x)", sku_id, sku_id); - else - ccprints("SKU ID: not set in cbi"); - - if (fw_config != UNINITIALIZED_FW_CONFIG) - ccprints("FW Config: %d (0x%x)", fw_config, fw_config); - else - ccprints("FW Config: not set in cbi"); - - /* Allow the board project to make runtime changes based on CBI data */ - board_cbi_init(); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); diff --git a/baseboard/guybrush/usb_pd_policy.c b/baseboard/guybrush/usb_pd_policy.c deleted file mode 100644 index 79725e827a..0000000000 --- a/baseboard/guybrush/usb_pd_policy.c +++ /dev/null @@ -1,92 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for Zork boards */ - -#include "charge_manager.h" -#include "chipset.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "ioexpander.h" -#include "system.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" - -int pd_check_vconn_swap(int port) -{ - /* - * Do not allow vconn swap 5V rail is off - * S5_PGOOD depends on PG_PP5000_S5 being asserted, - * so GPIO_S5_PGOOD is a reasonable proxy for PP5000_S5 - */ - return gpio_get_level(GPIO_S5_PGOOD); -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE)) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE)) - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -__override int board_pd_set_frs_enable(int port, int enable) -{ - /* - * Both PPCs require the FRS GPIO to be set as soon as FRS capability - * is established. - */ - if (port == 0) - ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN, enable); - else if (port == 1) - ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN, enable); - - return EC_SUCCESS; -} - -/* Used by Vbus discharge common code with CONFIG_USB_PD_DISCHARGE */ -int board_vbus_source_enabled(int port) -{ - return tcpm_get_src_ctrl(port); -} - -/* Used by USB charger task with CONFIG_USB_PD_5V_EN_CUSTOM */ -int board_is_sourcing_vbus(int port) -{ - return board_vbus_source_enabled(port); -} diff --git a/baseboard/hatch/baseboard.c b/baseboard/hatch/baseboard.c deleted file mode 100644 index dd93e581cf..0000000000 --- a/baseboard/hatch/baseboard.c +++ /dev/null @@ -1,397 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Hatch family-specific configuration */ -#include "atomic.h" -#include "battery_fuel_gauge.h" -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "chipset.h" -#include "console.h" -#include "cros_board_info.h" -#include "driver/charger/bq25710.h" -#include "driver/ppc/sn5s330.h" -#include "driver/tcpm/anx7447.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "ec_commands.h" -#include "espi.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "power.h" -#include "stdbool.h" -#include "system.h" -#include "tcpm/tcpci.h" -#include "timer.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -/******************************************************************************/ -/* Wake up pins */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_ACOK_OD, - GPIO_POWER_BUTTON_L, - /* EC_RST_ODL needs to wake device while in PSL hibernate. */ - GPIO_SYS_RESET_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/******************************************************************************/ -/* I2C port map configuration */ -const struct i2c_port_t i2c_ports[] = { -#ifdef CONFIG_ACCEL_FIFO - {"sensor", I2C_PORT_SENSOR, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA}, -#endif - {"ppc0", I2C_PORT_PPC0, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - {"tcpc1", I2C_PORT_TCPC1, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, -#endif - {"tcpc0", I2C_PORT_TCPC0, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, -#ifdef BOARD_AKEMI - {"thermal", I2C_PORT_THERMAL, 400, GPIO_I2C4_SCL, GPIO_I2C4_SDA}, -#endif -#ifdef BOARD_JINLON - {"thermal", I2C_PORT_THERMAL, 100, GPIO_I2C4_SCL, GPIO_I2C4_SDA}, -#endif -#ifdef BOARD_MUSHU - {"f75303_temp", I2C_PORT_THERMAL, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA}, - {"gpu_temp", I2C_PORT_GPU, 100, GPIO_I2C4_SCL, GPIO_I2C4_SDA}, -#endif - {"power", I2C_PORT_POWER, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA}, - {"eeprom", I2C_PORT_EEPROM, 100, GPIO_I2C7_SCL, GPIO_I2C7_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/******************************************************************************/ -/* Charger Chip Configuration */ -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = BQ25710_SMBUS_ADDR1_FLAGS, - .drv = &bq25710_drv, - }, -}; - -/******************************************************************************/ -/* Chipset callbacks/hooks */ - -__attribute__((weak)) bool board_has_kb_backlight(void) -{ - /* Default enable keyboard backlight */ - return true; -} - -/* Called on AP S0iX -> S0 transition */ -static void baseboard_chipset_resume(void) -{ - if (board_has_kb_backlight()) - gpio_set_level(GPIO_EC_KB_BL_EN, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, baseboard_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S0iX transition */ -static void baseboard_chipset_suspend(void) -{ - if (board_has_kb_backlight()) - gpio_set_level(GPIO_EC_KB_BL_EN, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, baseboard_chipset_suspend, - HOOK_PRIO_DEFAULT); - -void board_hibernate(void) -{ - int port; - - /* - * To support hibernate from ectool, keyboard, and console, - * ensure that the AP is fully shutdown before hibernating. - */ -#ifdef HAS_TASK_CHIPSET - chipset_force_shutdown(CHIPSET_SHUTDOWN_BOARD_CUSTOM); -#endif - - /* - * If VBUS is not being provided by any of the PD ports, - * then enable the SNK FET to allow AC to pass through - * if it is later connected to ensure that AC_PRESENT - * will wake up the EC from this state - */ - for (port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) - ppc_vbus_sink_enable(port, 1); - - /* - * This seems like a hack, but the AP chipset state machine - * needs time to work through the transitions. Also, it - * works. - */ - msleep(300); -} - -/******************************************************************************/ -/* USB-C PPC Configuration */ -struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_TCPC_0] = { - .i2c_port = I2C_PORT_PPC0, - .i2c_addr_flags = SN5S330_ADDR0_FLAGS, - .drv = &sn5s330_drv - }, -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - [USB_PD_PORT_TCPC_1] = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = SN5S330_ADDR0_FLAGS, - .drv = &sn5s330_drv - }, -#endif -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/* Power Delivery and charging functions */ -void baseboard_tcpc_init(void) -{ - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) - board_reset_pd_mcu(); - - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL); - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL); - /* Enable BC 1.2 interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); - -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL); - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL); - /* Enable BC 1.2 interrupts */ - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL); -#endif -} -DECLARE_HOOK(HOOK_INIT, baseboard_tcpc_init, HOOK_PRIO_INIT_I2C + 1); - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int level; - - /* - * Check which port has the ALERT line set and ignore if that TCPC has - * its reset line active. - */ - if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL)) { - level = !!(tcpc_config[USB_PD_PORT_TCPC_0].flags & - TCPC_FLAGS_RESET_ACTIVE_HIGH); - if (gpio_get_level(GPIO_USB_C0_TCPC_RST) != level) - status |= PD_STATUS_TCPC_ALERT_0; - } - -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL)) { - level = !!(tcpc_config[USB_PD_PORT_TCPC_1].flags & - TCPC_FLAGS_RESET_ACTIVE_HIGH); - if (gpio_get_level(GPIO_USB_C1_TCPC_RST) != level) - status |= PD_STATUS_TCPC_ALERT_1; - } -#endif - - return status; -} - -static void reset_pd_port(int port, enum gpio_signal reset_gpio, - int hold_delay, int finish_delay) -{ - int level = !!(tcpc_config[port].flags & TCPC_FLAGS_RESET_ACTIVE_HIGH); - - gpio_set_level(reset_gpio, level); - msleep(hold_delay); - gpio_set_level(reset_gpio, !level); - if (finish_delay) - msleep(finish_delay); -} - -void board_reset_pd_mcu(void) -{ - /* - * TODO(b/130194590): This should be replaced with a common function - * once the gpio signal and delays are added to tcpc_config struct. - */ - - /* Assert reset to TCPC for required delay only if we have a battery. */ - if (battery_is_present() != BP_YES) - return; - - /* Reset TCPC0 */ - reset_pd_port(USB_PD_PORT_TCPC_0, GPIO_USB_C0_TCPC_RST, - BOARD_TCPC_C0_RESET_HOLD_DELAY, - BOARD_TCPC_C0_RESET_POST_DELAY); - -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - /* Reset TCPC1 */ - reset_pd_port(USB_PD_PORT_TCPC_1, GPIO_USB_C1_TCPC_RST, - BOARD_TCPC_C1_RESET_HOLD_DELAY, - BOARD_TCPC_C1_RESET_POST_DELAY); -#endif -} - -int board_set_active_charge_port(int port) -{ - int is_valid_port = (port >= 0 && - port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - - if (!is_valid_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - if (port == CHARGE_PORT_NONE) { - CPRINTSUSB("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTFUSB("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTSUSB("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTSUSB("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -int ppc_get_alert_status(int port) -{ - if (port == USB_PD_PORT_TCPC_0) - return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0; - return port == USB_PD_PORT_TCPC_0 ? - gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0 : -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 - gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0; -#else - EC_SUCCESS; -#endif -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} - -#ifdef USB_PD_PORT_TCPC_MST -void baseboard_mst_enable_control(enum mst_source src, int level) -{ - static uint32_t mst_input_levels; - - if (level) - atomic_or(&mst_input_levels, 1 << src); - else - atomic_clear_bits(&mst_input_levels, 1 << src); - - gpio_set_level(GPIO_EN_MST, mst_input_levels ? 1 : 0); -} -#endif - -/* Enable or disable input devices, based on chipset state */ -__override void lid_angle_peripheral_enable(int enable) -{ - if (board_is_convertible()) { - if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - enable = 0; - keyboard_scan_enable(enable, KB_SCAN_DISABLE_LID_ANGLE); - } -} - -static uint8_t sku_id; -static uint8_t board_id; - -uint8_t get_board_sku(void) -{ - return sku_id; -} - -uint8_t get_board_id(void) -{ - return board_id; -} - -/* Read CBI from i2c eeprom and initialize variables for board variants */ -static void cbi_init(void) -{ - uint32_t val; - - /* SKU ID */ - if (cbi_get_sku_id(&val) != EC_SUCCESS || val > UINT8_MAX) { - CPRINTS("Read SKU Error value :%d", val); - return; - } - - sku_id = val; - - CPRINTS("SKU: %d", sku_id); - - /* Board ID */ - if (cbi_get_board_version(&val) != EC_SUCCESS || val > UINT8_MAX) { - CPRINTS("Read Board ID Error (%d)", val); - } - - board_id = val; - - CPRINTS("Board ID: %d", board_id); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); - -__override enum ec_pd_port_location board_get_pd_port_location(int port) -{ - switch (port) { - case 0: - return EC_PD_PORT_LOCATION_LEFT_BACK; - case 1: - return EC_PD_PORT_LOCATION_RIGHT_BACK; - default: - return EC_PD_PORT_LOCATION_UNKNOWN; - } -} diff --git a/baseboard/hatch/baseboard.h b/baseboard/hatch/baseboard.h deleted file mode 100644 index bf9140b33f..0000000000 --- a/baseboard/hatch/baseboard.h +++ /dev/null @@ -1,222 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Hatch baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -#include "compiler.h" -#include "stdbool.h" - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -/* NPCX7 config */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -/* Internal SPI flash on NPCX796FC is 512 kB */ -#define CONFIG_FLASH_SIZE_BYTES (512 * 1024) -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ -#define CONFIG_I2C - -/* Optional console commands */ -#define CONFIG_CMD_CHARGER_DUMP - -/* EC Defines */ -#define CONFIG_ADC -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CRC8 -#define CONFIG_CBI_EEPROM -#define CONFIG_DPTF -#define CONFIG_HIBERNATE_PSL -#define CONFIG_LED_ONOFF_STATES -#define CONFIG_LTO -#define CONFIG_PWM -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -/* Chipset config */ -#define CONFIG_CHIPSET_COMETLAKE -#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_PP5000_CONTROL -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* Common Keyboard Defines */ -#define CONFIG_CMD_KEYBOARD -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_KEYPAD -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2 - -/* Sensors */ -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO_AND_HOST_EVENT -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT - -/* Don't wake up from suspend on any MKBP event */ -#define CONFIG_MKBP_EVENT_WAKEUP_MASK 0 - -/* I2C_PORT_ACCEL needs to be defined for i2c transactions */ -#define I2C_PORT_ACCEL I2C_PORT_SENSOR - -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#if !defined(BOARD_PALKIA) -#define CONFIG_ACCEL_FIFO -/* FIFO size is in power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -/* Sensor console commands */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO -#endif /* !BOARD_PALKIA */ - -/* Common charger defines */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT -#define CONFIG_CHARGER -#define CONFIG_CHARGER_BQ25710 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 /* Allow low-current USB charging */ -#undef CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON -#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 1 -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -/* - * Don't allow the system to boot to S0 when the battery is low and unable to - * communicate on locked systems (which haven't PD negotiated) - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 15001 - -/* Common battery defines */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART -#undef CONFIG_BATT_HOST_FULL_FACTOR -#define CONFIG_BATT_HOST_FULL_FACTOR 100 - -/* USB Type C and USB PD defines */ -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#if defined(BOARD_PALKIA) -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#else -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#endif -#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USBC_PPC_SN5S330 -#define CONFIG_USBC_PPC_VCONN -#define CONFIG_USBC_SS_MUX -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USBC_PPC_DEDICATED_INT - -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_CMD_PPC_DUMP - -/* Include CLI command needed to support CCD testing. */ -#define CONFIG_CMD_CHARGEN - -#define USB_PD_PORT_TCPC_0 0 -#if CONFIG_USB_PD_PORT_MAX_COUNT > 1 -#define USB_PD_PORT_TCPC_1 1 -#endif - -/* BC 1.2 */ -#define CONFIG_USB_CHARGER - -#if !defined(BOARD_PALKIA) -/* Common Sensor Defines */ -#define CONFIG_TABLET_MODE -#endif - -/* TODO(b/122273953): Use correct PD delay values */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* TODO(b/122273953): Use correct PD power values */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 60000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* I2C Bus Configuration */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0 -#define I2C_PORT_PPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT3_0 -#define I2C_PORT_THERMAL NPCX_I2C_PORT4_1 -#define I2C_PORT_POWER NPCX_I2C_PORT5_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 -#define I2C_ADDR_EEPROM_FLAGS 0x50 -#define I2C_PORT_BATTERY I2C_PORT_POWER -#define I2C_PORT_CHARGER I2C_PORT_POWER - -/* Other common defines */ -#define CONFIG_BACKLIGHT_LID -#define GPIO_ENABLE_BACKLIGHT GPIO_EDP_BKLTEN_OD - -#define PP5000_PGOOD_POWER_SIGNAL_MASK POWER_SIGNAL_MASK(X86_PP5000_A_PGOOD) - -#ifndef __ASSEMBLER__ - -enum mst_source { - MST_TYPE_C0, - MST_TYPE_C1, - MST_HDMI, -}; - -/* Forward declare common (within Hatch) board-specific functions */ -bool board_has_kb_backlight(void); -unsigned char get_board_sku(void); -unsigned char get_board_id(void); -void board_reset_pd_mcu(void); -void baseboard_mst_enable_control(enum mst_source, int level); -bool board_is_convertible(void); - -FORWARD_DECLARE_ENUM(battery_present); - -/* Check with variant about battery presence. */ -enum battery_present variant_battery_present(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/hatch/battery.c b/baseboard/hatch/battery.c deleted file mode 100644 index 063aa3721d..0000000000 --- a/baseboard/hatch/battery.c +++ /dev/null @@ -1,80 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery.h" -#include "battery_fuel_gauge.h" -#include "battery_smart.h" -#include "gpio.h" -#include "system.h" - -static enum battery_present batt_pres_prev = BP_NOT_SURE; - -enum battery_present __attribute__((weak)) variant_battery_present(void) -{ - return BP_NOT_SURE; -} - -enum battery_present battery_hw_present(void) -{ - enum battery_present bp = variant_battery_present(); - - if (bp != BP_NOT_SURE) - return bp; - - return gpio_get_level(GPIO_EC_BATT_PRES_ODL) ? BP_NO : BP_YES; -} - -static int battery_init(void) -{ - int batt_status; - - return battery_status(&batt_status) ? 0 : - !!(batt_status & STATUS_INITIALIZED); -} - -/* - * Physical detection of battery. - */ -static enum battery_present battery_check_present_status(void) -{ - enum battery_present batt_pres; - - /* Get the physical hardware status */ - batt_pres = battery_hw_present(); - - /* - * If the battery is not physically connected, then no need to perform - * any more checks. - */ - if (batt_pres != BP_YES) - return batt_pres; - - /* - * If the battery is present now and was present last time we checked, - * return early. - */ - if (batt_pres == batt_pres_prev) - return batt_pres; - - /* - * Ensure that battery is: - * 1. Not in cutoff - * 2. Initialized - */ - if (battery_is_cut_off() != BATTERY_CUTOFF_STATE_NORMAL || - battery_init() == 0) { - batt_pres = BP_NO; - } - - return batt_pres; -} - -enum battery_present battery_is_present(void) -{ - batt_pres_prev = battery_check_present_status(); - return batt_pres_prev; -} diff --git a/baseboard/hatch/build.mk b/baseboard/hatch/build.mk deleted file mode 100644 index 864225f605..0000000000 --- a/baseboard/hatch/build.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -*- makefile -*- -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Hatch baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-$(CONFIG_BATTERY_SMART)+=battery.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/baseboard/hatch/usb_pd_policy.c b/baseboard/hatch/usb_pd_policy.c deleted file mode 100644 index a66bfefe87..0000000000 --- a/baseboard/hatch/usb_pd_policy.c +++ /dev/null @@ -1,90 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for Hatch boards */ - -#include "charge_manager.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "system.h" -#include "tcpm/tcpci.h" -#include "tcpm/tcpm.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap if pp5000_A rail is enabled */ - return gpio_get_level(GPIO_EN_PP5000_A); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - -#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT - /* Give back the current quota we are no longer using */ - charge_manager_source_port(port, 0); -#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - -#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT - /* Ensure we advertise the proper available current quota */ - charge_manager_source_port(port, 1); -#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -#ifdef CONFIG_USB_PD_VBUS_DETECT_PPC -int pd_snk_is_vbus_provided(int port) -{ - return ppc_is_vbus_present(port); -} -#endif - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} diff --git a/baseboard/herobrine/baseboard.c b/baseboard/herobrine/baseboard.c deleted file mode 100644 index 3103aaf4c5..0000000000 --- a/baseboard/herobrine/baseboard.c +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Herobrine baseboard-specific configuration */ - -#include "i2c.h" - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY); -} diff --git a/baseboard/herobrine/baseboard.h b/baseboard/herobrine/baseboard.h deleted file mode 100644 index 108f7f8cf5..0000000000 --- a/baseboard/herobrine/baseboard.h +++ /dev/null @@ -1,218 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Herobrine baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * By default, enable all console messages excepted event and HC: - * The sensor stack is generating a lot of activity. - * They can be enabled through the console command 'chan'. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_HOSTCMD))) - -/* NPCX7 config */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -#define NPCX_TACH_SEL2 0 /* No tach. */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ - -/* Internal SPI flash on NPCX7 */ -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - -/* EC Modules */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_VIRTUAL_BATTERY -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_LED_COMMON -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_ADC -#define CONFIG_BACKLIGHT_LID -#define CONFIG_FPU -#define CONFIG_PWM -#define CONFIG_PWM_DISPLIGHT -#define CONFIG_HIBERNATE_PSL - -#define CONFIG_VBOOT_HASH - -#undef CONFIG_PECI - -#define CONFIG_HOSTCMD_SHI -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_HOSTCMD_SECTION_SORTED -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_MKBP_USE_GPIO - -#define CONFIG_BOARD_VERSION_GPIO -#define CONFIG_CBI_GPIO -#define CONFIG_CRC8 -#define CONFIG_POWER_BUTTON -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_CMD_BUTTON -#define CONFIG_SWITCH -#define CONFIG_LID_SWITCH -#define CONFIG_EXTPOWER_GPIO - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -/* Increase console output buffer since we have the RAM available. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BATT_PRES_ODL -#define CONFIG_BATTERY_SMART - -/* Charger */ -#define CONFIG_CHARGER -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER_ISL9238 -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_USB_CHARGER -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_PSYS_READ -#define CONFIG_CHARGER_DISCHARGE_ON_AC - -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 10000 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 - -/* - * USB ID - * - * This is allocated specifically for Herobrine - * http://google3/hardware/standards/usb/ - */ -#define CONFIG_USB_PID 0x5055 - -/* USB */ -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_CMD_TCPC_DUMP -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_5V_EN_CUSTOM -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* RTC */ -#define CONFIG_CMD_RTC -#define CONFIG_HOSTCMD_RTC - -/* Sensors */ -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is a power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO - -/* PD */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -#define PD_OPERATING_POWER_MW 10000 -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Chipset */ -#define CONFIG_CHIPSET_SC7280 -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CHIPSET_RESUME_INIT_HOOK -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_CMD_AP_RESET_LOG - -/* - * Macros for GPIO signals used in common code that don't match the - * schematic names. Signal names in gpio.inc match the schematic and are - * then redefined here to so it's more clear which signal is being used for - * which purpose. - */ -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL -#define GPIO_LID_OPEN GPIO_LID_OPEN_EC -#define GPIO_SHI_CS_L GPIO_AP_EC_SPI_CS_L -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_BATT_PRES_ODL GPIO_EC_BATT_PRES_ODL -#define GPIO_ENABLE_BACKLIGHT GPIO_EC_BL_DISABLE_L -#define GPIO_BOARD_VERSION1 GPIO_BRD_ID0 -#define GPIO_BOARD_VERSION2 GPIO_BRD_ID1 -#define GPIO_BOARD_VERSION3 GPIO_BRD_ID2 -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV - -/* I2C Ports */ -#define I2C_PORT_BATTERY I2C_PORT_POWER -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_ACCEL I2C_PORT_SENSOR -#define I2C_PORT_POWER NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_WLC NPCX_I2C_PORT3_0 -#define I2C_PORT_RTC NPCX_I2C_PORT4_1 -#define I2C_PORT_EEPROM NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 - -/* UART */ -#define CONFIG_CMD_CHARGEN - -/* Define the host events which are allowed to wake AP up from S3 */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_RTC) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_DEVICE)) - -/* And the MKBP events */ -#ifdef HAS_TASK_KEYSCAN -#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_KEY_MATRIX) | \ - BIT(EC_MKBP_EVENT_HOST_EVENT) | \ - BIT(EC_MKBP_EVENT_SENSOR_FIFO)) -#else -#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_HOST_EVENT) | \ - BIT(EC_MKBP_EVENT_SENSOR_FIFO)) -#endif - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/herobrine/build.mk b/baseboard/herobrine/build.mk deleted file mode 100644 index f007fd7118..0000000000 --- a/baseboard/herobrine/build.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y+=baseboard.o -baseboard-y+=usbc_config.o -baseboard-y+=usb_pd_policy.o diff --git a/baseboard/herobrine/usb_pd_policy.c b/baseboard/herobrine/usb_pd_policy.c deleted file mode 100644 index 7ca2688aef..0000000000 --- a/baseboard/herobrine/usb_pd_policy.c +++ /dev/null @@ -1,262 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charge_manager.h" -#include "chipset.h" -#include "console.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* In G3, do not allow vconn swap since PP5000 rail is off */ - return gpio_get_level(GPIO_EN_PP5000); -} - -static uint8_t vbus_en[CONFIG_USB_PD_PORT_MAX_COUNT]; -#if CONFIG_USB_PD_PORT_MAX_COUNT == 1 -static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = {TYPEC_RP_1A5}; -#else -static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = {TYPEC_RP_1A5, - TYPEC_RP_1A5}; -#endif - -static void board_vbus_update_source_current(int port) -{ - /* Both port are controlled by PPC SN5S330. */ - ppc_set_vbus_source_current_limit(port, vbus_rp[port]); - ppc_vbus_source_enable(port, vbus_en[port]); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = vbus_en[port]; - - /* Disable VBUS */ - vbus_en[port] = 0; - board_vbus_update_source_current(port); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - /* Disable charging */ - board_vbus_sink_enable(port, 0); - - pd_set_vbus_discharge(port, 0); - - /* Provide VBUS */ - vbus_en[port] = 1; - board_vbus_update_source_current(port); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -int board_vbus_source_enabled(int port) -{ - return vbus_en[port]; -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - vbus_rp[port] = rp; - board_vbus_update_source_current(port); -} - -int pd_snk_is_vbus_provided(int port) -{ - return tcpm_check_vbus_level(port, VBUS_PRESENT); -} - -/* ----------------- Vendor Defined Messages ------------------ */ -#ifdef CONFIG_USB_PD_ALT_MODE_DFP -__override int svdm_dp_config(int port, uint32_t *payload) -{ - int opos = pd_alt_mode(port, TCPCI_MSG_SOP, USB_SID_DISPLAYPORT); - uint8_t pin_mode = get_dp_pin_mode(port); - - if (!pin_mode) - return 0; - - /* - * Defer setting the usb_mux until HPD goes high, svdm_dp_attention(). - * The AP only supports one DP phy. An external DP mux switches between - * the two ports. Should switch those muxes when it is really used, - * i.e. HPD high; otherwise, the real use case is preempted, like: - * (1) plug a dongle without monitor connected to port-0, - * (2) plug a dongle without monitor connected to port-1, - * (3) plug a monitor to the port-1 dongle. - */ - - payload[0] = VDO(USB_SID_DISPLAYPORT, 1, - CMD_DP_CONFIG | VDO_OPOS(opos)); - payload[1] = VDO_DP_CFG(pin_mode, /* pin mode */ - 1, /* DPv1.3 signaling */ - 2); /* UFP connected */ - return 2; -}; - -__override void svdm_dp_post_config(int port) -{ - dp_flags[port] |= DP_FLAGS_DP_ON; -} - -/** - * Is the port fine to be muxed its DisplayPort lines? - * - * Only one port can be muxed to DisplayPort at a time. - * - * @param port Port number of TCPC. - * @return 1 is fine; 0 is bad as other port is already muxed; - */ -static int is_dp_muxable(int port) -{ - int i; - - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) - if (i != port) { - if (usb_mux_get(i) & USB_PD_MUX_DP_ENABLED) - return 0; - } - - return 1; -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - enum gpio_signal hpd = GPIO_DP_HOT_PLUG_DET; - int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); - int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); - int cur_lvl = gpio_get_level(hpd); - mux_state_t mux_state; - - dp_status[port] = payload[1]; - - if (!is_dp_muxable(port)) { - /* TODO(waihong): Info user? */ - CPRINTS("p%d: The other port is already muxed.", port); - return 0; - } - - /* - * Initial implementation to handle HPD. Only the first-plugged port - * works, i.e. sending HPD signal to AP. The second-plugged port - * will be ignored. - * - * TODO(waihong): Continue the above case, if the first-plugged port - * is then unplugged, switch to the second-plugged port and signal AP? - */ - if (lvl) { - /* - * Enable and switch the DP port selection mux to the - * correct port. - * - * TODO(waihong): Better to move switching DP mux to - * the usb_mux abstraction. - */ - gpio_set_level(GPIO_DP_MUX_SEL, port == 1); - gpio_set_level(GPIO_DP_MUX_OE_L, 0); - - /* Connect the SBU lines in PPC chip. */ - if (IS_ENABLED(CONFIG_USBC_PPC_SBU)) - ppc_set_sbu(port, 1); - - /* - * Connect the USB SS/DP lines in TCPC chip. - * - * When mf_pref not true, still use the dock muxing - * because of the board USB-C topology (limited to 2 - * lanes DP). - */ - usb_mux_set(port, USB_PD_MUX_DOCK, - USB_SWITCH_CONNECT, - polarity_rm_dts(pd_get_polarity(port))); - } else { - /* Disconnect the DP port selection mux. */ - gpio_set_level(GPIO_DP_MUX_OE_L, 1); - gpio_set_level(GPIO_DP_MUX_SEL, 0); - - /* Disconnect the SBU lines in PPC chip. */ - if (IS_ENABLED(CONFIG_USBC_PPC_SBU)) - ppc_set_sbu(port, 0); - - /* Disconnect the DP but keep the USB SS lines in TCPC chip. */ - usb_mux_set(port, USB_PD_MUX_USB_ENABLED, - USB_SWITCH_CONNECT, - polarity_rm_dts(pd_get_polarity(port))); - } - - if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && - (irq || lvl)) - /* - * Wake up the AP. IRQ or level high indicates a DP sink is now - * present. - */ - pd_notify_dp_alt_mode_entry(port); - - /* Configure TCPC for the HPD event, for proper muxing */ - mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | - (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); - usb_mux_hpd_update(port, mux_state); - - /* Signal AP for the HPD event, through GPIO to AP */ - if (irq & cur_lvl) { - uint64_t now = get_time().val; - /* Wait for the minimum spacing between IRQ_HPD if needed */ - if (now < svdm_hpd_deadline[port]) - usleep(svdm_hpd_deadline[port] - now); - - /* Generate IRQ_HPD pulse */ - gpio_set_level(hpd, 0); - usleep(HPD_DSTREAM_DEBOUNCE_IRQ); - gpio_set_level(hpd, 1); - - /* Set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + - HPD_USTREAM_DEBOUNCE_LVL; - } else if (irq & !lvl) { - CPRINTF("ERR:HPD:IRQ&LOW\n"); - return 0; - } else { - gpio_set_level(hpd, lvl); - /* Set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + - HPD_USTREAM_DEBOUNCE_LVL; - } - - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ - if (is_dp_muxable(port)) { - /* Disconnect the DP port selection mux. */ - gpio_set_level(GPIO_DP_MUX_OE_L, 1); - gpio_set_level(GPIO_DP_MUX_SEL, 0); - - /* Signal AP for the HPD low event */ - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); - gpio_set_level(GPIO_DP_HOT_PLUG_DET, 0); - } -} -#endif /* CONFIG_USB_PD_ALT_MODE_DFP */ diff --git a/baseboard/herobrine/usbc_config.c b/baseboard/herobrine/usbc_config.c deleted file mode 100644 index 5e613c40a5..0000000000 --- a/baseboard/herobrine/usbc_config.c +++ /dev/null @@ -1,60 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Herobrine family-specific USB-C configuration */ - -#include "charger.h" -#include "charger/isl923x_public.h" -#include "charge_state.h" -#include "usb_pd.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -int charger_profile_override(struct charge_state_data *curr) -{ - int usb_mv; - int port; - - if (curr->state != ST_CHARGE) - return 0; - - /* Lower the max requested voltage to 5V when battery is full. */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF) && - !(curr->batt.flags & BATT_FLAG_BAD_STATUS) && - !(curr->batt.flags & BATT_FLAG_WANT_CHARGE) && - (curr->batt.status & STATUS_FULLY_CHARGED)) - usb_mv = 5000; - else - usb_mv = PD_MAX_VOLTAGE_MV; - - if (pd_get_max_voltage() != usb_mv) { - CPRINTS("VBUS limited to %dmV", usb_mv); - for (port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; port++) - pd_set_external_voltage_limit(port, usb_mv); - } - - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} diff --git a/baseboard/honeybuns/baseboard.c b/baseboard/honeybuns/baseboard.c deleted file mode 100644 index df56697fbf..0000000000 --- a/baseboard/honeybuns/baseboard.c +++ /dev/null @@ -1,489 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Honeybuns family-specific configuration */ -#include "console.h" -#include "cros_board_info.h" -#include "driver/mp4245.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "usb_pd.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "usbc_ppc.h" -#include "driver/tcpm/tcpm.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) - -#define POWER_BUTTON_SHORT_USEC (300 * MSEC) -#define POWER_BUTTON_LONG_USEC (5000 * MSEC) -#define POWER_BUTTON_DEBOUNCE_USEC (30) - -#define BUTTON_EVT_CHANGE BIT(0) -#define BUTTON_EVT_INFO BIT(1) - -enum power { - POWER_OFF, - POWER_ON -}; - -enum button { - BUTTON_RELEASE, - BUTTON_PRESS, - BUTTON_PRESS_POWER_ON, - BUTTON_PRESS_SHORT, - BUTTON_PRESS_LONG, -}; - -#define LED_ON_OFF_BIT BIT(0) -#define LED_COLOR_BIT BIT(2) -#define LED_FLASH_SEQ_LENGTH 8 - -enum led_color { - GREEN, - YELLOW, - OFF, -}; - -static enum power dock_state; -#ifdef SECTION_IS_RW -static int button_level; -static int button_level_pending; -static int dock_mf; -static int led_count; -#endif - -/******************************************************************************/ - -__maybe_unused static void board_power_sequence(int enable) -{ - int i; - - if (enable) { - for(i = 0; i < board_power_seq_count; i++) { - gpio_set_level(board_power_seq[i].signal, - board_power_seq[i].level); - CPRINTS("power seq: rail = %d", i); - if (board_power_seq[i].delay_ms) - msleep(board_power_seq[i].delay_ms); - } - } else { - for(i = board_power_seq_count - 1; i >= 0; i--) { - gpio_set_level(board_power_seq[i].signal, - !board_power_seq[i].level); - CPRINTS("sequence[%d]: level = %d", i, - !board_power_seq[i].level); - } - } - - dock_state = enable; - CPRINTS("board: Power rails %s", dock_state ? "on" : "off"); -} - -/******************************************************************************/ -/* I2C port map configuration */ -const struct i2c_port_t i2c_ports[] = { - {"i2c1", I2C_PORT_I2C1, 400, GPIO_EC_I2C1_SCL, GPIO_EC_I2C1_SDA}, - {"i2c3", I2C_PORT_I2C3, 400, GPIO_EC_I2C3_SCL, GPIO_EC_I2C3_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -#ifdef SECTION_IS_RW -static void baseboard_set_led(enum led_color color) -{ - /* - * TODO(b/164157329): The power button feature should be connected to a - * 2 color LED which is part of the button. Currently, the power button - * LED is a single color LED which is controlled by on the of the power - * rails. Using the status LED now to demonstrate the LED behavior - * associated with a power button press. - */ - CPRINTS("led: color = %d", color); - - /* Not all boards may have LEDs under EC control */ -#if defined(GPIO_PWR_BUTTON_RED) && defined(GPIO_PWR_BUTTON_GREEN) - if (color == OFF) { - gpio_set_level(GPIO_PWR_BUTTON_RED, 1); - gpio_set_level(GPIO_PWR_BUTTON_GREEN, 1); - } else if (color == GREEN) { - gpio_set_level(GPIO_PWR_BUTTON_RED, 1); - gpio_set_level(GPIO_PWR_BUTTON_GREEN, 0); - } else if (color == YELLOW) { - gpio_set_level(GPIO_PWR_BUTTON_RED, 0); - gpio_set_level(GPIO_PWR_BUTTON_GREEN, 0); - } -#endif -} - -static void baseboard_led_callback(void); -DECLARE_DEFERRED(baseboard_led_callback); - -static void baseboard_led_callback(void) -{ - /* - * Flash LED on transition using a simple 3 bit counter. Bit 0 controls - * LED on/off and bit 2 controls which color to set during the on phase. - */ - int color = led_count & LED_COLOR_BIT ? dock_mf : dock_mf ^ 1; - - /* - * TODO(b/164157329): This function implements a simple flashing - * transition when the MF preference bit is changed via a long power - * button press sequence. This might need to move to the board function - * if not required/desired on all variants. - */ - - if (led_count & LED_ON_OFF_BIT) - baseboard_set_led(color); - else - baseboard_set_led(OFF); - - /* Flash sequence is 8 steps */ - if (++led_count < LED_FLASH_SEQ_LENGTH) - hook_call_deferred(&baseboard_led_callback_data, 150 * MSEC); -} - -static void baseboard_change_mf_led(void) -{ - led_count = 0; - baseboard_led_callback(); -} - -void baseboard_set_mst_lane_control(int mf) -{ - /* - * The parameter mf reflects the desired lane control value. If the - * current value does not match the desired, then the MST hub must first - * be put into reset, so the MST hub will latch in the correct value - * when it's taken out of reset. - */ - if (mf != gpio_get_level(GPIO_MST_HUB_LANE_SWITCH)) { - /* put MST into reset */ - gpio_set_level(GPIO_MST_RST_L, 0); - msleep(1); - gpio_set_level(GPIO_MST_HUB_LANE_SWITCH, mf); - CPRINTS("MST: lane control = %s", mf ? "high" : "low"); - msleep(1); - /* lane control is set, take MST out of reset */ - gpio_set_level(GPIO_MST_RST_L, 1); - } -} - -static void baseboard_enable_mp4245(void) -{ - int mv; - int ma; - - mp4245_set_voltage_out(5000); - mp4245_votlage_out_enable(1); - msleep(MP4245_VOUT_5V_DELAY_MS); - mp3245_get_vbus(&mv, &ma); - CPRINTS("mp4245: vout @ %d mV enabled", mv); -} - -#endif /* SECTION_IS_RW */ - -static void baseboard_init(void) -{ -#ifdef SECTION_IS_RW - uint32_t fw_config; -#endif - - /* Turn on power rails */ - board_power_sequence(1); - CPRINTS("board: Power rails enabled"); - -#ifdef SECTION_IS_RW - /* Force TC state machine to start in TC_ERROR_RECOVERY */ - system_clear_reset_flags(EC_RESET_FLAG_POWER_ON); - /* Make certain SN5S330 PPC does full initialization */ - system_set_reset_flags(EC_RESET_FLAG_EFS); - - /* - * Dock multi function (mf) preference is stored in bit 0 of fw_config - * field of the CBI. If this value is programmed, then make sure the - * MST_LANE_CONTROL gpio matches the mf bit. - */ - if (!cbi_get_fw_config(&fw_config)) { - dock_mf = CBI_FW_MF_PREFERENCE(fw_config); - baseboard_set_mst_lane_control(dock_mf); - } else { - dock_mf = dock_get_mf_preference(); - cbi_set_fw_config(dock_mf); - CPRINTS("cbi: setting default result = %s", - cbi_get_fw_config(&fw_config) ? "pass" : "fail"); - } - -#ifdef GPIO_USBC_UF_ATTACHED_SRC - /* Configure UF usbc ppc and check usbc state */ - baseboard_config_usbc_usb3_ppc(); -#endif /* GPIO_USBC_UF_ATTACHED_SRC */ - - /* Enable power button interrupt */ - gpio_enable_interrupt(GPIO_PWR_BTN); - /* Set dock mf preference LED */ - baseboard_set_led(dock_mf); - /* Setup VBUS to default value */ - baseboard_enable_mp4245(); - -#else - /* Set up host port usbc to present Rd on CC lines */ - if(baseboard_usbc_init(USB_PD_PORT_HOST)) - CPRINTS("usbc: Failed to set up sink path"); - else - CPRINTS("usbc: sink path configure success!"); -#endif /* SECTION_IS_RW */ -} -/* - * Power sequencing must run before any other chip init is attempted, so run - * power sequencing as soon as I2C bus is initialized. - */ -DECLARE_HOOK(HOOK_INIT, baseboard_init, HOOK_PRIO_INIT_I2C + 1); - -#ifdef SECTION_IS_RW -static void baseboard_power_on(void) -{ - int port_max = board_get_usb_pd_port_count(); - int port; - - CPRINTS("pwrbtn: power on: mf = %d", dock_mf); - /* Adjust system flags to full PPC init occurs */ - system_clear_reset_flags(EC_RESET_FLAG_POWER_ON); - system_set_reset_flags(EC_RESET_FLAG_EFS); - /* Enable power rails and release reset signals */ - board_power_sequence(1); - /* Set VBUS to 5V and enable output from mp4245 */ - baseboard_enable_mp4245(); - /* Set dock mf preference LED */ - baseboard_set_led(dock_mf); - /* - * Lane control (realtek MST) must be set prior to releasing MST - * reset. - */ - baseboard_set_mst_lane_control(dock_mf); - /* - * When the power to the PPC is turned off, then back on, the PPC will - * default into dead battery mode. Dead battery resistors are disabled - * as part of the full PPC intializaiton sequence. This is required to - * force a detach event with port parter which can be attached as usbc - * source when honeybuns power rails are off. - */ - for (port = 0; port < port_max; port++) { - ppc_init(port); - msleep(1000); - /* Inform TC state machine that it can resume */ - pd_set_suspend(port, 0); - } - /* Enable usbc interrupts */ - board_enable_usbc_interrupts(); - -#ifdef GPIO_USBC_UF_ATTACHED_SRC - baseboard_config_usbc_usb3_ppc(); -#endif -} - -static void baseboard_power_off(void) -{ - int port_max = board_get_usb_pd_port_count(); - int port; - - CPRINTS("pwrbtn: power off"); - /* Put ports in TC suspend state */ - for (port = 0; port < port_max; port++) - pd_set_suspend(port, 1); - - /* Disable ucpd peripheral (prevents interrupts) */ - tcpm_release(USB_PD_PORT_HOST); - /* Disable PPC/TCPC interrupts */ - board_disable_usbc_interrupts(); - -#ifdef GPIO_USBC_UF_ATTACHED_SRC - /* Disable PPC interrupts for PS8803 managed port */ - baseboard_usbc_usb3_enable_interrupts(0); -#endif - /* Set dock power button/MF preference LED */ - baseboard_set_led(OFF); - /* Go into power off state */ - board_power_sequence(0); -} - -static void baseboard_toggle_mf(void) -{ - uint32_t fw_config; - - if (!cbi_get_fw_config(&fw_config)) { - /* Update the user MF preference stored in CBI */ - fw_config ^= CBI_FW_MF_MASK; - cbi_set_fw_config(fw_config); - /* Update variable used to track user MF preference */ - dock_mf = CBI_FW_MF_PREFERENCE(fw_config); - /* Flash led for visual indication of user MF change */ - baseboard_change_mf_led(); - - /* - * Suspend, then release host port to force new MF setting to - * take effect. - */ - pd_set_suspend(USB_PD_PORT_HOST, 1); - msleep(250); - pd_set_suspend(USB_PD_PORT_HOST, 0); - } -} - -/* - * Main task entry point for UCPD task - */ -void power_button_task(void *u) -{ - int timer_us = POWER_BUTTON_DEBOUNCE_USEC * 4; - enum button state = BUTTON_RELEASE; - uint32_t evt; - - /* - * Capture current button level in case it's being pressed when the dock - * is powered on. Note timer_us is initialized for debounce time to - * double check. - */ - button_level = gpio_get_level(GPIO_PWR_BTN); - - while (1) { - evt = task_wait_event(timer_us); - timer_us = -1; - - if (evt == BUTTON_EVT_INFO) { - /* Only used for console command for debug */ - CPRINTS("pwrbtn: pwr = %d, state = %d, level = %d", - dock_state, state, button_level); - continue; - } - - switch (state) { - case BUTTON_RELEASE: - /* - * Default wait state: Only need to check if the button - * is pressed and start the short press timer. - */ - if (evt & BUTTON_EVT_CHANGE && button_level == - BUTTON_PRESSED_LEVEL) { - state = BUTTON_PRESS; - timer_us = (POWER_BUTTON_SHORT_USEC - - POWER_BUTTON_DEBOUNCE_USEC); - } - break; - case BUTTON_PRESS: - /* - * Validate short press by ensuring that button is still - * pressed after short press timer expires. - */ - if (evt & BUTTON_EVT_CHANGE && - button_level == BUTTON_RELEASED_LEVEL) { - state = BUTTON_RELEASE; - } else { - /* Start long press timer */ - timer_us = POWER_BUTTON_LONG_USEC - - POWER_BUTTON_SHORT_USEC; - /* - * If dock is currently off, then change to the - * power on state. If dock is already on, then - * advance to short press state. - */ - if (dock_state == POWER_OFF) { - baseboard_power_on(); - state = BUTTON_PRESS_POWER_ON; - } else { - state = BUTTON_PRESS_SHORT; - } - } - break; - case BUTTON_PRESS_POWER_ON: - /* - * Short press recognized and dock was just powered - * on. If button is no longer pressed, then just return - * to the default state. Else, button is still pressed - * after long press timer has expired. - */ - if (evt & BUTTON_EVT_CHANGE && - button_level == BUTTON_RELEASED_LEVEL) { - state = BUTTON_RELEASE; - } else { - state = BUTTON_PRESS_LONG; - baseboard_toggle_mf(); - } - break; - case BUTTON_PRESS_SHORT: - /* - * Short press was recognized and dock power state was - * already on. If button is now released, then turn dock - * off. - */ - if (evt & BUTTON_EVT_CHANGE && - button_level == BUTTON_RELEASED_LEVEL) { - state = BUTTON_RELEASE; - baseboard_power_off(); - } else { - state = BUTTON_PRESS_LONG; - baseboard_toggle_mf(); - } - break; - case BUTTON_PRESS_LONG: - if (evt & BUTTON_EVT_CHANGE && - button_level == BUTTON_RELEASED_LEVEL) { - state = BUTTON_RELEASE; - } - break; - } - } -} - -static void baseboard_power_button_debounce(void) -{ - int level = gpio_get_level(GPIO_PWR_BTN); - - /* Sanity check, level should be same after debounce interval */ - if (level != button_level_pending) - return; - - button_level = level; - task_set_event(TASK_ID_POWER_BUTTON, BUTTON_EVT_CHANGE); -} -DECLARE_DEFERRED(baseboard_power_button_debounce); - -void baseboard_power_button_evt(int level) -{ - button_level_pending = level; - - hook_call_deferred(&baseboard_power_button_debounce_data, - POWER_BUTTON_DEBOUNCE_USEC); -} - -static int command_pwr_btn(int argc, char **argv) -{ - - if (argc == 1) { - task_set_event(TASK_ID_POWER_BUTTON, BUTTON_EVT_INFO); - return EC_SUCCESS; - } - - if (!strcasecmp(argv[1], "on")) { - baseboard_power_on(); - } else if (!strcasecmp(argv[1], "off")) { - baseboard_power_off(); - } else if (!strcasecmp(argv[1], "mf")) { - baseboard_toggle_mf(); - } else { - return EC_ERROR_PARAM1; - } - - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(pwr_btn, command_pwr_btn, - "<on|off|mf>", - "Simulate Power Button Press"); - -#endif diff --git a/baseboard/honeybuns/baseboard.h b/baseboard/honeybuns/baseboard.h deleted file mode 100644 index 1b56b07f8c..0000000000 --- a/baseboard/honeybuns/baseboard.h +++ /dev/null @@ -1,330 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Honeybuns baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* EC Defines */ -#define CONFIG_CRC8 - -/* Flash Lyaout */ -/* - * Flash layout: we redefine the sections offsets and sizes as we will use - * RO/RW regions of different sizes. - */ -#undef _IMAGE_SIZE -#undef CONFIG_ROLLBACK_OFF -#undef CONFIG_ROLLBACK_SIZE -#undef CONFIG_FLASH_PSTATE -#undef CONFIG_FW_PSTATE_SIZE -#undef CONFIG_FW_PSTATE_OFF -#undef CONFIG_SHAREDLIB_SIZE -#undef CONFIG_RO_MEM_OFF -#undef CONFIG_RO_STORAGE_OFF -#undef CONFIG_RO_SIZE -#undef CONFIG_RW_MEM_OFF -#undef CONFIG_RW_STORAGE_OFF -#undef CONFIG_RW_SIZE -#undef CONFIG_EC_PROTECTED_STORAGE_OFF -#undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_OFF -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#undef CONFIG_WP_STORAGE_OFF -#undef CONFIG_WP_STORAGE_SIZE - -#define CONFIG_FLASH_PSTATE -/* Do not use a dedicated PSTATE bank */ -#undef CONFIG_FLASH_PSTATE_BANK - -#define CONFIG_SHAREDLIB_SIZE 0 - -#define CONFIG_RO_MEM_OFF 0 -#define CONFIG_RO_STORAGE_OFF 0 -#define CONFIG_RO_SIZE (64*1024) - -#define CONFIG_RW_MEM_OFF (CONFIG_RO_SIZE + CONFIG_RO_MEM_OFF) -#define CONFIG_RW_STORAGE_OFF 0 -#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES - \ - (CONFIG_RW_MEM_OFF - CONFIG_RO_MEM_OFF)) - -#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE - -#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF -#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 -#define CONFIG_STM_HWTIMER32 -#define TIM_CLOCK32 2 -#define TIM_CLOCK_MSB 3 -#define TIM_CLOCK_LSB 15 -#define TIM_WATCHDOG 7 - -/* Honeybuns platform does not have a lid switch */ -#undef CONFIG_LID_SWITCH - -/* USART and EC console configs */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 3 -#define CONFIG_UART_TX_DMA -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 2048 -#define CONFIG_UART_TX_DMA_CH STM32_DMAC_USART3_TX -#define CONFIG_UART_TX_DMA_PH DMAMUX_REQ_USART3_TX - -/* CBI Configs */ -#define I2C_ADDR_EEPROM_FLAGS 0x50 -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CMD_CBI -#define CONFIG_EEPROM_CBI_WP -#define CONFIG_BYPASS_CBI_EEPROM_WP_CHECK -#define GPIO_EC_CBI_WP GPIO_EC_FLASH_WP_ODL -#define CBI_FW_MF_MASK BIT(0) -#define CBI_FW_MF_PREFERENCE(val) (val & (CBI_FW_MF_MASK)) - -/* USB Configuration */ -#define CONFIG_USB -#define CONFIG_STREAM_USB -#define CONFIG_USB_UPDATE -#define CONFIG_USB_SERIALNO -#define DEFAULT_SERIALNO "Uninitialized" -#define CONFIG_MAC_ADDR -#define DEFAULT_MAC_ADDR "Uninitialized" - -/* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_UPDATE 1 -#define USB_EP_COUNT 2 - -#define USB_IFACE_UPDATE 0 -#define USB_IFACE_COUNT 1 - -#ifndef __ASSEMBLER__ -/* USB string indexes */ -enum usb_strings { - USB_STR_DESC = 0, - USB_STR_VENDOR, - USB_STR_PRODUCT, - USB_STR_SERIALNO, - USB_STR_VERSION, - USB_STR_UPDATE_NAME, - USB_STR_COUNT -}; -#endif - -/* RW Specific Config Options */ -#ifdef SECTION_IS_RW -/* No AP on any honeybuns variants */ -#undef CONFIG_USB_PD_HOST_CMD - -/* USB Type C and USB PD defines */ -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_CUSTOM_PDO -#define CONFIG_USB_PD_ALT_MODE_UFP_DP -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_REV30 -/* - * Source current limit pull options. Honeybuns always wants TYPEC_RP_3A0 - * current limits for the usbc host port (C0). For port C1, some variants are - * designed with a 1.5A current limit. This variation is handled via - * BOARD_C1_1A5_LIMIT which would be set in a variant's board.h file. - * - * CONFIG_USB_PD_3A_PORTS should be left at 0 as this will disable DPM from - * doing any dynamic current limit management. - */ -#undef CONFIG_USB_PD_PULLUP -#define CONFIG_USB_PD_PULLUP TYPEC_RP_3A0 -#define CONFIG_USB_PD_3A_PORTS 0 -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_PS8805 -#define CONFIG_USB_PD_TCPM_STM32GX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USBC_PPC_SN5S330 -#define CONFIG_USBC_PPC_VCONN -#define CONFIG_USBC_PPC_DEDICATED_INT -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USBC_SS_MUX - -#define CONFIG_HAS_TASK_PD_INT -#define CONFIG_STM32G4_UCPD_DEBUG -#define CONFIG_CMD_PPC_DUMP -#define CONFIG_CMD_TCPC_DUMP - -#define CONFIG_MP4245 -#define USB_HUB_OCP_RESET_MSEC (10 * MSEC) - -#else /* RO Specific Config Options */ - -/* RWSIG Config Options */ -/* Sign and switch to RW partition on boot. */ -#define CONFIG_RWSIG -#define CONFIG_RSA -#define CONFIG_SHA256_UNROLLED -#undef CONFIG_RWSIG_JUMP_TIMEOUT -#define CONFIG_RWSIG_JUMP_TIMEOUT (7000 * MSEC) - -/* Don't build PD console command for RO */ -#undef CONFIG_CMD_PD -#undef CONFIG_USB_PD_CONSOLE_CMD -#undef CONFIG_USB_PD_HOST_CMD -/* Make sure these files aren't built in RO */ -#undef CONFIG_USB_PRL_SM -#undef CONFIG_USB_TYPEC_SM -#undef CONFIG_USB_PE_SM - -#endif /* SECTION_IS_RW */ - -#define CONFIG_RWSIG_TYPE_RWSIG -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 -#define CONFIG_SHA256 - -/* Define typical operating power and max power. */ -#define PD_MAX_VOLTAGE_MV 5000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_POWER_MW 15000 -#define PD_OPERATING_POWER_MW 15000 - -/* TODO(b:147314141): Verify these timings */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* I2C Bus Configuration */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER - -/* - * Macros for GPIO signals used in common code that don't match the - * schematic names. Signal names in gpio.inc match the schematic and are - * then redefined here to so it's more clear which signal is being used for - * which purpose. - */ -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_WP_L GPIO_EC_WP_L - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "stddef.h" - -struct power_seq { - enum gpio_signal signal; /* power/reset gpio_signal to control */ - int level; /* level to set in power sequence */ - unsigned int delay_ms; /* delay (in msec) after setting gpio_signal */ -}; - -enum mf_preference { - MF_OFF = 0, - MF_ON, -}; - -/* - * This is required as adc_channel is included in adc.h which ends up being - * included when TCPMv2 functions are included - */ -enum adc_channel { - ADC_CH_COUNT -}; - -extern const struct power_seq board_power_seq[]; -extern const size_t board_power_seq_count; - -void baseboard_power_button_evt(int level); - -/* - * Configure the host port to present Rd on both CC lines. This function is - * called in RO which does not otherwise have usbc/usb-pd support. - * - * @return true - initialized. false - not. - */ -int baseboard_usbc_init(int port); - -/* - * Get a board's desired multi-function (MF) prefernce. This allows for board - * specific policy. - * - * @return 1 if multi function (DP + USB3) is preferred, 0 otherwise - */ -int dock_get_mf_preference(void); - -/* - * Initialize and configure PPC used for USB3 only port - * - * @return EC success if PPC initialization is successful - */ -int baseboard_config_usbc_usb3_ppc(void); - -/* - * Called from interrupt handler for PS8803 attached.src gpio. This gpio signal - * will be set high by the PS8803 when it's in the attached.src state and low - * otherwise. For boards wich have a PPC on this port, this signal is used to - * enable/disable VBUS in the PPC. - */ -void baseboard_usb3_check_state(void); - - -/* - * Set MST_LANE_CONTROL gpio to match the DP pin configuration selected - * by the host in the DP Configure SVDM message. - * - * @param dock_mf 1 -> 2 lanes DP, 0 -> 4 lanes DP - */ -void baseboard_set_mst_lane_control(int dock_mf); - -/* - * Control enable/disable for interrupts used for usb3 only usbc port. - * - * @param enable -> 1 for enable, 0 for disable - */ -void baseboard_usbc_usb3_enable_interrupts(int enable); - -/* - * Called from interrupt handler for PPC used on usb3 only port. - * - */ -void baseboard_usbc_usb3_irq(void); - -/** - * Determine if VBUS is present or not. - * - * @param port: The Type-C port number. - * @return 1 if VBUS is present, 0 if not. - */ -int c1_ps8805_is_vbus_present(int port); - -/** - * Is the port sourcing Vbus? - * - * @param port: The Type-C port number. - * @return 1 if sourcing Vbus, 0 if not. - */ -int c1_ps8805_is_sourcing_vbus(int port); - -/** - * Turn on/off VBUS for port C1 - * - * @param port: The Type-C port number. - * @param enable: 1: Turn on VBUS, 0: turn off VBUS. - * @return EC_SUCCESS on success, error otherwise. - */ -int c1_ps8805_vbus_source_enable(int port, int enable); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/honeybuns/build.mk b/baseboard/honeybuns/build.mk deleted file mode 100644 index 2868911925..0000000000 --- a/baseboard/honeybuns/build.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Honeybuns baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o -baseboard-y+=usbc_support.o diff --git a/baseboard/honeybuns/usb_pd_policy.c b/baseboard/honeybuns/usb_pd_policy.c deleted file mode 100644 index ef2350a03d..0000000000 --- a/baseboard/honeybuns/usb_pd_policy.c +++ /dev/null @@ -1,638 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "console.h" -#include "chip/stm32/ucpd-stm32gx.h" -#include "cros_board_info.h" -#include "driver/mp4245.h" -#include "driver/tcpm/tcpci.h" -#include "driver/mp4245.h" -#include "hooks.h" -#include "task.h" -#include "timer.h" -#include "usb_common.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_dp_ufp.h" -#include "usb_tc_sm.h" -#include "usbc_ppc.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -#define MP4245_VOLTAGE_WINDOW BIT(2) -#define MP4245_VOLTAGE_WINDOW_MASK (MP4245_VOLTAGE_WINDOW - 1) - -#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\ - PDO_FIXED_COMM_CAP | PDO_FIXED_UNCONSTRAINED) - -/* Voltage indexes for the PDOs */ -enum volt_idx { - PDO_IDX_5V = 0, - PDO_IDX_9V = 1, - PDO_IDX_15V = 2, - PDO_IDX_20V = 3, - PDO_IDX_COUNT -}; - -/* PDOs */ -const uint32_t pd_src_host_pdo[] = { - [PDO_IDX_5V] = PDO_FIXED(5000, 3000, PDO_FIXED_FLAGS), - [PDO_IDX_9V] = PDO_FIXED(9000, 3000, 0), - [PDO_IDX_15V] = PDO_FIXED(15000, 3000, 0), - [PDO_IDX_20V] = PDO_FIXED(20000, 3000, 0), -}; -BUILD_ASSERT(ARRAY_SIZE(pd_src_host_pdo) == PDO_IDX_COUNT); - -#ifdef BOARD_C1_1A5_LIMIT -const uint32_t pd_src_display_pdo[] = { - [PDO_IDX_5V] = PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), -}; -#else -const uint32_t pd_src_display_pdo[] = { - [PDO_IDX_5V] = PDO_FIXED(5000, 3000, PDO_FIXED_FLAGS), -}; -#endif - -const uint32_t pd_snk_pdo[] = { - [PDO_IDX_5V] = PDO_FIXED(5000, 0, PDO_FIXED_FLAGS), -}; -const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo); - -static int src_host_pdo_cnt_override; - -#define PD_DR_SWAP_ATTEMPT_MAX 3 -static int pd_dr_swap_attempt_count[CONFIG_USB_PD_PORT_MAX_COUNT]; - -static int command_hostpdo(int argc, char **argv) -{ - char *e; - int limit; - - if (argc >= 2) { - - limit = strtoi(argv[1], &e, 10); - if ((limit < 0) || (limit > PDO_IDX_COUNT)) - return EC_ERROR_PARAM1; - - src_host_pdo_cnt_override = limit; - } - ccprintf("src host pdo override = %d\n", src_host_pdo_cnt_override); - - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(hostpdo, command_hostpdo, - "<0|1|2|3|4>", - "Limit number of PDOs for C0"); - -int dpm_get_source_pdo(const uint32_t **src_pdo, const int port) -{ - int pdo_cnt = 0; - - if (port == USB_PD_PORT_HOST) { - *src_pdo = pd_src_host_pdo; - pdo_cnt = ARRAY_SIZE(pd_src_host_pdo); - /* - * This override is only active via a console command. Only used - * for debug to limit the level of VBUS offered to port partner - * if desired. The console command only allows 0 -> - * PDO_IDX_COUNT for this value. - */ - if (src_host_pdo_cnt_override) - pdo_cnt = src_host_pdo_cnt_override; - } else { - *src_pdo = pd_src_display_pdo; - pdo_cnt = ARRAY_SIZE(pd_src_display_pdo); - } - - return pdo_cnt; -} - -/* - * Default Port Discovery DR Swap Policy. - * - * 1) If port == 0 and port data role is DFP, transition to pe_drs_send_swap - * 2) If port == 1 and port data role is UFP, transition to pe_drs_send_swap - */ -__override bool port_discovery_dr_swap_policy(int port, - enum pd_data_role dr, bool dr_swap_flag) -{ - /* - * Port0: test if role is DFP - * Port1: test if role is UFP - */ - enum pd_data_role role_test = - (port == USB_PD_PORT_HOST) ? PD_ROLE_DFP : PD_ROLE_UFP; - - /* - * Request data role swap if not in the port's desired data role and if - * the attempt count is less than the max allowed. This function is - * called for each PE run once in a PD contract. If the port partner - * rejects data role swap requests (eg compliance tester), want to limit - * how many DR swap requests are attempted. - */ - if (dr == role_test && (pd_dr_swap_attempt_count[port]++ < - PD_DR_SWAP_ATTEMPT_MAX)) - return true; - - /* Do not perform a DR swap */ - return false; -} - -/* - * Default Port Discovery VCONN Swap Policy. - * - * 1) No need to Vconn swap. This board does not require any cable information. - */ -__override bool port_discovery_vconn_swap_policy(int port, - bool vconn_swap_flag) -{ - return false; -} - -int pd_check_vconn_swap(int port) -{ - /*TODO: Dock is the Vconn source */ - return 1; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - if (port < 0 || port >= CONFIG_USB_PD_PORT_MAX_COUNT) - return; - - if (IS_ENABLED(BOARD_C1_NO_PPC) && port) { - prev_en = c1_ps8805_is_sourcing_vbus(port); - /* Disable VBUS via PPC. */ - c1_ps8805_vbus_source_enable(port, 0); - } else { - prev_en = ppc_is_sourcing_vbus(port); - /* Disable VBUS via PPC. */ - ppc_vbus_source_enable(port, 0); - } - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - if (port == USB_PD_PORT_HOST) { - int mv; - int ma; - int unused_mv; - - /* - * Because VBUS on C0 is turned on/off via the PPC, the - * voltage from the mp4245 does not need to be turned off, or - * set to 0V. Instead, reset VBUS voltage to default value - * (fixed 5V SRC_CAP) so VBUS is ready to be applied at the next - * attached.src condition. - */ - pd_extract_pdo_power(pd_src_host_pdo[0], &ma, &mv, - &unused_mv); - mp4245_set_voltage_out(mv); - /* Ensure voltage is back to 5V */ - pd_transition_voltage(1); - } -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* - * Note: For host port, the mp4245 output voltage is set for 5V by - * default and each time VBUS is turned off. VOUT from the mp4245 is - * left enabled as there is a switch (either PPC or discrete) to turn - * VBUS on/off on the wire. - */ - if (IS_ENABLED(BOARD_C1_NO_PPC) && port) - rv = c1_ps8805_vbus_source_enable(port, 1); - else - rv = ppc_vbus_source_enable(port, 1); - - if (rv) - return rv; - - return EC_SUCCESS; -} - -void pd_transition_voltage(int idx) -{ - int port = TASK_ID_TO_PD_PORT(task_get_current()); - int mv; - int target_mv; - int mv_average = 0; - int ma; - int vbus_hi; - int vbus_lo; - int i; - int mv_buffer[MP4245_VOLTAGE_WINDOW]; - - /* Only C0 can provide more than 5V */ - if (port != USB_PD_PORT_HOST) - return; - - /* - * Set the VBUS output voltage and current limit to the values specified - * by the PDO requested by sink. Note that USB PD uses idx = 1 for 1st - * PDO of SRC_CAP which must always be 5V fixed supply. - */ - pd_extract_pdo_power(pd_src_host_pdo[idx - 1], &ma, &target_mv, - &mv); - - /* Initialize sample delay buffer */ - for (i = 0; i < MP4245_VOLTAGE_WINDOW; i++) - mv_buffer[i] = 0; - - /* Set VBUS level to value specified in the requested PDO */ - mp4245_set_voltage_out(target_mv); - /* Wait for vbus to be within ~5% of its target value */ - vbus_hi = target_mv + (target_mv >> 4); - vbus_lo = target_mv - (target_mv >> 4); - - for (i = 0; i < 20; i++) { - /* Read current sample */ - mv = 0; - mp3245_get_vbus(&mv, &ma); - /* Add new sample to cicrcular delay buffer */ - mv_buffer[i & MP4245_VOLTAGE_WINDOW_MASK] = mv; - /* - * Don't compute average until sample delay buffer is - * full. - */ - if (i >= (MP4245_VOLTAGE_WINDOW_MASK)) { - int sum = 0; - int j; - - /* Sum the voltage samples */ - for (j = 0; j < MP4245_VOLTAGE_WINDOW; j++) - sum += mv_buffer[j]; - /* Add rounding */ - sum += MP4245_VOLTAGE_WINDOW / 2; - mv_average = sum / MP4245_VOLTAGE_WINDOW; - /* - * Check if average is within the target - * voltage range. - */ - if ((mv_average >= vbus_lo) && - (mv_average <= vbus_hi)) { - CPRINTS("usbc[%d]: VBUS to %d mV in %d steps", - port, target_mv, i); - return; - } - } - - /* - * The voltage ramp from 5V to 20V requires ~30 - * msec. The max loop count and this sleep time gives plenty - * of time for this change. - */ - msleep(2); - } - - CPRINTS("usbc[%d]: Vbus transition timeout: target = %d, measure = %d", - port, target_mv, mv_average); -} - -int pd_snk_is_vbus_provided(int port) -{ - if (IS_ENABLED(BOARD_C1_NO_PPC) && port) - return c1_ps8805_is_vbus_present(port); - else - return ppc_is_vbus_present(port); -} - -__override bool pd_check_vbus_level(int port, enum vbus_level level) -{ - if (level == VBUS_PRESENT) - return pd_snk_is_vbus_provided(port); - else - return !pd_snk_is_vbus_provided(port); -} - -int board_vbus_source_enabled(int port) -{ - if (IS_ENABLED(BOARD_C1_NO_PPC) && port) - return c1_ps8805_is_sourcing_vbus(port); - else - return ppc_is_sourcing_vbus(port); -} - -void pd_set_input_current_limit(int port, uint32_t max_ma, - uint32_t supply_voltage) -{ - -} - -int pd_check_data_swap(int port, - enum pd_data_role data_role) -{ - int swap = 0; - - if (port == 0) - swap = (data_role == PD_ROLE_DFP); - else if (port == 1) - swap = (data_role == PD_ROLE_UFP); - - return swap; -} - -int pd_check_power_swap(int port) -{ - - if (pd_get_power_role(port) == PD_ROLE_SINK) - return 1; - - return 0; -} - -#ifdef BOARD_C1_1A5_LIMIT -__override int typec_get_default_current_limit_rp(int port) -{ - int rp = TYPEC_RP_USB; - - if (port == USB_PD_PORT_HOST) - rp = TYPEC_RP_3A0; - else if (port == USB_PD_PORT_DP) - rp = TYPEC_RP_1A5; - - return rp; -} -#endif - -static void usb_tc_connect(void) -{ - int port = TASK_ID_TO_PD_PORT(task_get_current()); - - /* - * The EC needs to indicate to the USB hub when the host port is - * attached so that the USB-EP can be properly enumerated. GPIO_BPWR_DET - * is used for this purpose. - */ - if (port == USB_PD_PORT_HOST) { - gpio_set_level(GPIO_BPWR_DET, 1); -#ifdef GPIO_UFP_PLUG_DET - gpio_set_level(GPIO_UFP_PLUG_DET, 0); -#endif - } - - /* Clear data role swap attempt counter at each usbc attach */ - pd_dr_swap_attempt_count[port] = 0; -} -DECLARE_HOOK(HOOK_USB_PD_CONNECT, usb_tc_connect, HOOK_PRIO_DEFAULT); - -static void usb_tc_disconnect(void) -{ - int port = TASK_ID_TO_PD_PORT(task_get_current()); - - /* Only the host port disconnect is relevant */ - if (port == USB_PD_PORT_HOST) { - gpio_set_level(GPIO_BPWR_DET, 0); -#ifdef GPIO_UFP_PLUG_DET - gpio_set_level(GPIO_UFP_PLUG_DET, 1); -#endif - } -} -DECLARE_HOOK(HOOK_USB_PD_DISCONNECT, usb_tc_disconnect, HOOK_PRIO_DEFAULT); - -__override bool pd_can_charge_from_device(int port, const int pdo_cnt, - const uint32_t *pdos) -{ - /* - * This function is called to determine if this port can be charged by - * the port partner. We always want to be a power role source, so always - * return false. - */ - - return false; -} - -static int vdm_is_dp_enabled(int port) -{ - mux_state_t mux_state = usb_mux_get(port); - - return !!(mux_state & USB_PD_MUX_DP_ENABLED); -} - -/* ----------------- Vendor Defined Messages ------------------ */ - -const uint32_t vdo_idh = VDO_IDH(0, /* data caps as USB host */ - 1, /* data caps as USB device */ - IDH_PTYPE_HUB, /* UFP product type usbpd hub */ - 1, /* supports alt modes */ - USB_VID_GOOGLE); - -static const uint32_t vdo_idh_rev30 = VDO_IDH_REV30( - 0, /* Data caps as USB host */ - 1, /* Data caps as USB device */ - IDH_PTYPE_HUB, - 1, /* Supports alt modes */ - IDH_PTYPE_DFP_UNDEFINED, - USB_TYPEC_RECEPTACLE, - USB_VID_GOOGLE); - -const uint32_t vdo_product = VDO_PRODUCT(CONFIG_USB_PID, CONFIG_USB_BCD_DEV); - -static const uint32_t vdo_ufp1 = VDO_UFP1( - (VDO_UFP1_CAPABILITY_USB20 - | VDO_UFP1_CAPABILITY_USB32), - USB_TYPEC_RECEPTACLE, - VDO_UFP1_ALT_MODE_RECONFIGURE, - USB_R30_SS_U32_U40_GEN2); - -static int svdm_response_identity(int port, uint32_t *payload) -{ - int vdo_count; - - /* Verify that SVID is PD SID */ - if (PD_VDO_VID(payload[0]) != USB_SID_PD) { - return 0; - } - - /* Cstat and Product VDOs don't depend on spec revision */ - payload[VDO_INDEX_CSTAT] = VDO_CSTAT(0); - payload[VDO_INDEX_PRODUCT] = vdo_product; - - if (pd_get_rev(port, TCPCI_MSG_SOP) == PD_REV30) { - /* PD Revision 3.0 */ - payload[VDO_INDEX_IDH] = vdo_idh_rev30; - payload[VDO_INDEX_PTYPE_UFP1_VDO] = vdo_ufp1; - vdo_count = VDO_INDEX_PTYPE_UFP1_VDO; - } else { - payload[VDO_INDEX_IDH] = vdo_idh; - vdo_count = VDO_INDEX_PRODUCT; - } - - /* Adjust VDO count for VDM header */ - return vdo_count + 1; -} - -static int svdm_response_svids(int port, uint32_t *payload) -{ - /* Verify that SVID is PD SID */ - if (PD_VDO_VID(payload[0]) != USB_SID_PD) { - return 0; - } - - payload[1] = USB_SID_DISPLAYPORT << 16; - /* number of data objects VDO header + 1 SVID for DP */ - return 2; -} - -#define OPOS_DP 1 - -const uint32_t vdo_dp_modes[1] = { - VDO_MODE_DP(/* Must support C and E. D is required for 2 lanes */ - MODE_DP_PIN_C | MODE_DP_PIN_D | MODE_DP_PIN_E, - 0, /* DFP pin cfg supported */ - 0, /* usb2.0 signalling in AMode may be req */ - CABLE_RECEPTACLE, /* its a receptacle */ - MODE_DP_V13, /* DPv1.3 Support, no Gen2 */ - MODE_DP_SNK) /* Its a sink only */ -}; - -static int svdm_response_modes(int port, uint32_t *payload) -{ - if (PD_VDO_VID(payload[0]) == USB_SID_DISPLAYPORT) { - memcpy(payload + 1, vdo_dp_modes, sizeof(vdo_dp_modes)); - return ARRAY_SIZE(vdo_dp_modes) + 1; - } else { - return 0; /* nak */ - } -} - -static int amode_dp_status(int port, uint32_t *payload) -{ - int opos = PD_VDO_OPOS(payload[0]); - int hpd = gpio_get_level(GPIO_DP_HPD); - int mf = dock_get_mf_preference(); - - if (opos != OPOS_DP) - return 0; /* nak */ - - payload[1] = VDO_DP_STATUS(0, /* IRQ_HPD */ - (hpd == 1), /* HPD_HI|LOW */ - 0, /* request exit DP */ - 0, /* request exit USB */ - mf, /* MF pref */ - vdm_is_dp_enabled(port), - 0, /* power low */ - 0x2); - return 2; -} - -static void svdm_configure_demux(int port, int enable, int mf) -{ - mux_state_t demux = usb_mux_get(port); - - if (enable) { - demux |= USB_PD_MUX_DP_ENABLED; - /* 4 lane mode if MF is not preferred */ - if (!mf) - demux &= ~USB_PD_MUX_USB_ENABLED; - /* - * Make sure the MST_LANE_CONTROL gpio is set to match the DP - * pin configuration selected by the host. Note that the mf - * passed into this function reflects the pin configuration - * selected by the host and not the user mf preference which is - * stored in bit 0 of CBI fw_config. - */ - baseboard_set_mst_lane_control(mf); - CPRINTS("DP[%d]: DFP-D selected pin config %s", - port, mf ? "D" : "C"); - } else { - demux &= ~USB_PD_MUX_DP_ENABLED; - demux |= USB_PD_MUX_USB_ENABLED; - } - - /* Configure demux for 2/4 lane DP and USB3 configuration */ - usb_mux_set(port, demux, USB_SWITCH_CONNECT, pd_get_polarity(port)); -} - -static int amode_dp_config(int port, uint32_t *payload) -{ - uint32_t dp_config = payload[1]; - int mf; - - /* - * Check pin assignment selected by DFP_D to determine if 2 lane or 4 - * lane DP ALT-MODe is required. (note PIN_C is for 4 lane and PIN_D is - * for 2 lane mode). - */ - mf = ((dp_config >> 8) & 0xff) == MODE_DP_PIN_D ? 1 : 0; - /* Configure demux for DP mode */ - svdm_configure_demux(port, 1, mf); - /* Notify hpd->pd conv that a DP_CONFIG message has been received */ - pd_ufp_enable_hpd_send(port); - - return 1; -} - -static int svdm_enter_mode(int port, uint32_t *payload) -{ - int rv = 0; /* will generate a NAK */ - - /* SID & mode request is valid */ - if ((PD_VDO_VID(payload[0]) == USB_SID_DISPLAYPORT) && - (PD_VDO_OPOS(payload[0]) == OPOS_DP)) { - - /* Store valid object position to indicate mode is active */ - pd_ufp_set_dp_opos(port, OPOS_DP); - - /* Entering ALT-DP mode, enable DP connection in demux */ - usb_pd_hpd_converter_enable(1); - - /* ACK response has 1 VDO */ - rv = 1; - } - - CPRINTS("svdm_enter[%d]: svid = %x, ret = %d", port, - PD_VDO_VID(payload[0]), rv); - - return rv; -} - -static int svdm_exit_mode(int port, uint32_t *payload) -{ - int opos = pd_ufp_get_dp_opos(port); - - if ((PD_VDO_VID(payload[0]) == USB_SID_DISPLAYPORT) && - (opos == OPOS_DP)) { - /* Clear mode active object position */ - pd_ufp_set_dp_opos(port, 0); - /* Configure demux to disable DP mode */ - svdm_configure_demux(port, 0, 0); - usb_pd_hpd_converter_enable(0); - - return 1; - } else { - CPRINTF("Unknown exit mode req:0x%08x\n", payload[0]); - return 0; - } -} - -static struct amode_fx dp_fx = { - .status = &amode_dp_status, - .config = &amode_dp_config, -}; - -const struct svdm_response svdm_rsp = { - .identity = &svdm_response_identity, - .svids = &svdm_response_svids, - .modes = &svdm_response_modes, - .enter_mode = &svdm_enter_mode, - .amode = &dp_fx, - .exit_mode = &svdm_exit_mode, -}; - -int pd_custom_vdm(int port, int cnt, uint32_t *payload, - uint32_t **rpayload) -{ - /* We don't support, so ignore this message */ - return 0; -} diff --git a/baseboard/honeybuns/usbc_support.c b/baseboard/honeybuns/usbc_support.c deleted file mode 100644 index 4d7049ad37..0000000000 --- a/baseboard/honeybuns/usbc_support.c +++ /dev/null @@ -1,480 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* USBC functions for RO */ - -#include "common.h" -#include "console.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/ps8xxx.h" -#include "sn5s330.h" -#include "hooks.h" -#include "i2c.h" -#include "system.h" -#include "timer.h" -#include "usb_charge.h" -#include "usb_pd_tcpm.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" -#include "registers.h" -#include "ucpd-stm32gx.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) - -enum usbc_states { - UNATTACHED_SNK, - ATTACH_WAIT_SNK, - ATTACHED_SNK, -}; - -/* Variables used to manage the simple usbc state machine */ -static int usbc_port; -static int usbc_state; -static int usbc_vbus; -static enum tcpc_cc_voltage_status cc1_v; -static enum tcpc_cc_voltage_status cc2_v; - -__maybe_unused static __const_data const char * const usbc_state_names[] = { - [UNATTACHED_SNK] = "Unattached.SNK", - [ATTACH_WAIT_SNK] = "AttachWait.SNK", - [ATTACHED_SNK] = "Attached.SNK", -}; - -static int read_reg(uint8_t port, int reg, int *regval) -{ - return i2c_read8(ppc_chips[port].i2c_port, - ppc_chips[port].i2c_addr_flags, - reg, - regval); -} - -static int write_reg(uint8_t port, int reg, int regval) -{ - return i2c_write8(ppc_chips[port].i2c_port, - ppc_chips[port].i2c_addr_flags, - reg, - regval); -} - -static int baseboard_ppc_enable_sink_path(int port) -{ - int regval; - int status; - int retries; - - /* - * It seems that sometimes setting the FUNC_SET1 register fails - * initially. Therefore, we'll retry a couple of times. - */ - retries = 0; - do { - status = write_reg(port, SN5S330_FUNC_SET1, SN5S330_ILIM_3_06); - if (status) { - retries++; - msleep(1); - } else { - break; - } - } while (retries < 10); - - /* Turn off dead battery resistors, turn on CC FETs */ - status = read_reg(port, SN5S330_FUNC_SET4, ®val); - if (!status) { - regval |= SN5S330_CC_EN; - status = write_reg(port, SN5S330_FUNC_SET4, regval); - } - if (status) { - return status; - } - - /* Enable sink path via PP2 */ - status = read_reg(port, SN5S330_FUNC_SET3, ®val); - if (!status) { - regval &= ~SN5S330_PP1_EN; - regval |= SN5S330_PP2_EN; - status = write_reg(port, SN5S330_FUNC_SET3, regval); - } - if (status) { - return status; - } - - return EC_SUCCESS; -} - -static void baseboard_ucpd_apply_rd(int port) -{ - uint32_t cfgr1_reg; - uint32_t moder_reg; - uint32_t cr; - - /* Ensure that clock to UCPD is enabled */ - STM32_RCC_APB1ENR2 |= STM32_RCC_APB1ENR2_UPCD1EN; - - /* Make sure CC1/CC2 pins PB4/PB6 are set for analog mode */ - moder_reg = STM32_GPIO_MODER(GPIO_B); - moder_reg |= 0x3300; - STM32_GPIO_MODER(GPIO_B) = moder_reg; - /* - * CFGR1 must be written when UCPD peripheral is disabled. Note that - * disabling ucpd causes the peripheral to quit any ongoing activity and - * sets all ucpd registers back their default values. - */ - - cfgr1_reg = STM32_UCPD_CFGR1_PSC_CLK_VAL(UCPD_PSC_DIV - 1) | - STM32_UCPD_CFGR1_TRANSWIN_VAL(UCPD_TRANSWIN_CNT - 1) | - STM32_UCPD_CFGR1_IFRGAP_VAL(UCPD_IFRGAP_CNT - 1) | - STM32_UCPD_CFGR1_HBITCLKD_VAL(UCPD_HBIT_DIV - 1); - STM32_UCPD_CFGR1(port) = cfgr1_reg; - - /* Enable ucpd */ - STM32_UCPD_CFGR1(port) |= STM32_UCPD_CFGR1_UCPDEN; - - /* Apply Rd to both CC lines */ - cr = STM32_UCPD_CR(port); - cr |= STM32_UCPD_CR_ANAMODE | STM32_UCPD_CR_CCENABLE_MASK; - STM32_UCPD_CR(port) = cr; - - /* - * After exiting reset, stm32gx will have dead battery mode enabled by - * default which connects Rd to CC1/CC2. This should be disabled when EC - * is powered up. - */ - STM32_PWR_CR3 |= STM32_PWR_CR3_UCPD1_DBDIS; -} - - -static void baseboard_ucpd_get_cc(int port, enum tcpc_cc_voltage_status *cc1, - enum tcpc_cc_voltage_status *cc2) -{ - int vstate_cc1; - int vstate_cc2; - int anamode; - uint32_t sr; - - /* - * cc_voltage_status is determined from vstate_cc bit field in the - * status register. The meaning of the value vstate_cc depends on - * current value of ANAMODE (src/snk). - * - * vstate_cc maps directly to cc_state from tcpci spec when ANAMODE = 1, - * but needs to be modified slightly for case ANAMODE = 0. - * - * If presenting Rp (source), then need to to a circular shift of - * vstate_ccx value: - * vstate_cc | cc_state - * ------------------ - * 0 -> 1 - * 1 -> 2 - * 2 -> 0 - */ - - /* Get vstate_ccx values and power role */ - sr = STM32_UCPD_SR(port); - /* Get Rp or Rd active */ - anamode = !!(STM32_UCPD_CR(port) & STM32_UCPD_CR_ANAMODE); - vstate_cc1 = (sr & STM32_UCPD_SR_VSTATE_CC1_MASK) >> - STM32_UCPD_SR_VSTATE_CC1_SHIFT; - vstate_cc2 = (sr & STM32_UCPD_SR_VSTATE_CC2_MASK) >> - STM32_UCPD_SR_VSTATE_CC2_SHIFT; - - /* Do circular shift if port == source */ - if (anamode) { - if (vstate_cc1 != STM32_UCPD_SR_VSTATE_RA) - vstate_cc1 += 4; - if (vstate_cc2 != STM32_UCPD_SR_VSTATE_RA) - vstate_cc2 += 4; - } else { - if (vstate_cc1 != STM32_UCPD_SR_VSTATE_OPEN) - vstate_cc1 = (vstate_cc1 + 1) % 3; - if (vstate_cc2 != STM32_UCPD_SR_VSTATE_OPEN) - vstate_cc2 = (vstate_cc2 + 1) % 3; - } - - *cc1 = vstate_cc1; - *cc2 = vstate_cc2; -} - -static int baseboard_rp_is_present(enum tcpc_cc_voltage_status cc1, - enum tcpc_cc_voltage_status cc2) -{ - return (cc1 >= TYPEC_CC_VOLT_RP_DEF || cc2 >= TYPEC_CC_VOLT_RP_DEF); -} - -static void baseboard_usbc_check_connect(void); -DECLARE_DEFERRED(baseboard_usbc_check_connect); - -static void baseboard_usbc_check_connect(void) -{ - enum tcpc_cc_voltage_status cc1; - enum tcpc_cc_voltage_status cc2; - int ppc_reg; - enum usbc_states enter_state = usbc_state; - - /* - * In RO, the only usbc related requirement is to enable the stm32g4 - * USB-EP to be enumerated by the host attached to C0. To prevent D+ - * being pulled high prior to VBUS presence, the EC uses GPIO_BPWR_DET - * to signal the USB hub that VBUS is present. Therefore, we need a - * simple usbc state machine to detect an attach (Rp and VBUS) event so - * this GPIO signal is properly controlled in RO. - * - * Note that RO only runs until the RWSIG timer expires and jumps to RW, - * and in RW, the full usb-pd stack is initialized and run. - */ - - /* Get current CC voltage levels */ - baseboard_ucpd_get_cc(usbc_port, &cc1, &cc2); - /* Update VBUS state */ - if (!read_reg(usbc_port, SN5S330_INT_STATUS_REG3, &ppc_reg)) - usbc_vbus = ppc_reg & SN5S330_VBUS_GOOD; - - switch (usbc_state) { - case UNATTACHED_SNK: - /* - * Require either CC1 or CC2 to have a valid Rp CC voltage level - * to advance to ATTACH_WAIT_SNK. - */ - if (baseboard_rp_is_present(cc1, cc2)) - usbc_state = ATTACH_WAIT_SNK; - break; - case ATTACH_WAIT_SNK: - /* - * This state handles debounce by ensuring the CC voltages are - * the same between two state machine iterations. If this - * condition is met, and VBUS is present, then advance to - * ATTACHED_SNK and set GPIO_BPWR_DET. - * - * If Rp voltage is no longer detected, then return to - * UNATTACHED_SNK. - */ - if (usbc_vbus && cc1 == cc1_v && cc2 == cc2_v) { - usbc_state = ATTACHED_SNK; - gpio_set_level(GPIO_BPWR_DET, 1); - } else if (!baseboard_rp_is_present(cc1, cc2)) { - usbc_state = UNATTACHED_SNK; - } - break; - case ATTACHED_SNK: - /* - * In this state, only checking for VBUS going away to indicate - * a detach event and inform the USB hub via GPIO_BPWR_DET. - */ - if (!usbc_vbus) { - usbc_state = UNATTACHED_SNK; - gpio_set_level(GPIO_BPWR_DET, 0); - } - break; - } - - /* Save CC voltage for debounce check */ - cc1_v = cc1; - cc2_v = cc2; - - if (enter_state != usbc_state) - CPRINTS("%s: cc1 = %d, cc2 = %d vbus = %d", - usbc_state_names[usbc_state], cc1, cc2, usbc_vbus); - - hook_call_deferred(&baseboard_usbc_check_connect_data, - PD_T_TRY_CC_DEBOUNCE); -} - -int baseboard_usbc_init(int port) -{ - int rv; - - /* Initialize ucpd and apply Rd to CC lines */ - baseboard_ucpd_apply_rd(port); - /* Initialize ppc to enable sink path */ - rv = baseboard_ppc_enable_sink_path(port); - if (rv) - CPRINTS("ppc init failed!"); - /* Save host port value */ - usbc_port = port; - /* Start RO usbc attach state machine */ - gpio_set_level(GPIO_BPWR_DET, 0); - /* Start simple usbc state machine */ - baseboard_usbc_check_connect(); - - return rv; -} - -#ifdef SECTION_IS_RW -int c1_ps8805_is_vbus_present(int port) -{ - int vbus; - - vbus = tcpm_check_vbus_level(port, VBUS_PRESENT); - - return vbus; -} - -int c1_ps8805_is_sourcing_vbus(int port) -{ - int rv; - int level; - - rv = ps8805_gpio_get_level(port, PS8805_GPIO_1, &level); - if (rv) - return 0; - - return level; -} - - -int c1_ps8805_vbus_source_enable(int port, int enable) -{ - - return ps8805_gpio_set_level(port, PS8805_GPIO_1, enable); -} - -__override bool usb_ufp_check_usb3_enable(int port) -{ - /* USB3.1 mux should be enabled based on UFP data role */ - return port == USB_PD_PORT_HOST; -} - -#ifdef GPIO_USBC_UF_ATTACHED_SRC -static int ppc_ocp_count; - -static void baseboard_usb3_manage_vbus(void) -{ - int level = gpio_get_level(GPIO_USBC_UF_ATTACHED_SRC); - - /* - * GPIO_USBC_UF_MUX_VBUS_EN is an output from the PS8803 which tracks if - * C2 is attached. When it's attached, this signal will be high. Use - * this level to control PPC VBUS on/off. - */ - ppc_vbus_source_enable(USB_PD_PORT_USB3, level); - CPRINTS("C2: State = %s", level ? "Attached.SRC " : "Unattached.SRC"); - - /* Reset OCP event counter for detach */ - if (!level) { - ppc_ocp_count = 0; - -#ifdef GPIO_USB_HUB_OCP_NOTIFY - /* - * In the case of an OCP event on this port, the usb hub should be - * notified via a GPIO signal. Following, an OCP, the attached.src state - * for the usb3 only port is checked again. If it's attached, then make - * sure the OCP notify signal is reset. - */ - gpio_set_level(GPIO_USB_HUB_OCP_NOTIFY, 1); -#endif - } -} -DECLARE_DEFERRED(baseboard_usb3_manage_vbus); - -void baseboard_usb3_check_state(void) -{ - hook_call_deferred(&baseboard_usb3_manage_vbus_data, 0); -} - -void baseboard_usbc_usb3_enable_interrupts(int enable) -{ - if (enable) { - /* Enable VBUS control interrupt for C2 */ - gpio_enable_interrupt(GPIO_USBC_UF_ATTACHED_SRC); - /* Enable PPC interrupt */ - gpio_enable_interrupt(GPIO_USBC_UF_PPC_INT_ODL); - } else { - /* Disable VBUS control interrupt for C2 */ - gpio_disable_interrupt(GPIO_USBC_UF_ATTACHED_SRC); - /* Disable PPC interrupt */ - gpio_disable_interrupt(GPIO_USBC_UF_PPC_INT_ODL); - } -} - -int baseboard_config_usbc_usb3_ppc(void) -{ - int rv; - - /* - * This port is not usb-pd capable, but there is a ppc which must be - * initialized, and keep the VBUS switch enabled. - */ - rv = ppc_init(USB_PD_PORT_USB3); - if (rv) - return rv; - - /* Need to set current limit to 3A to match advertised value */ - ppc_set_vbus_source_current_limit(USB_PD_PORT_USB3, TYPEC_RP_3A0); - /* Reset OCP event counter */ - ppc_ocp_count = 0; - - /* Check state at init time */ - baseboard_usb3_manage_vbus(); - - /* Enable attached.src and PPC interrupts */ - baseboard_usbc_usb3_enable_interrupts(1); - - return EC_SUCCESS; -} - -static void baseboard_usbc_usb3_handle_interrupt(void) -{ - int port = USB_PD_PORT_USB3; - - /* - * SN5S330's /INT pin is level, so process interrupts until it - * deasserts if the chip has a dedicated interrupt pin. - */ - while (gpio_get_level(GPIO_USBC_UF_PPC_INT_ODL) == 0) { - int rise = 0; - int fall = 0; - - read_reg(port, SN5S330_INT_TRIP_RISE_REG1, &rise); - read_reg(port, SN5S330_INT_TRIP_FALL_REG1, &fall); - - /* Notify the system about the overcurrent event. */ - if (rise & SN5S330_ILIM_PP1_MASK) { - CPRINTS("usb3_ppc: VBUS OC!"); - gpio_set_level(GPIO_USB_HUB_OCP_NOTIFY, 0); - if (++ppc_ocp_count < 5) - hook_call_deferred(&baseboard_usb3_manage_vbus_data, - USB_HUB_OCP_RESET_MSEC); - else - CPRINTS("usb3_ppc: VBUS OC limit reached!"); - } - - /* Clear the interrupt sources. */ - write_reg(port, SN5S330_INT_TRIP_RISE_REG1, rise); - write_reg(port, SN5S330_INT_TRIP_FALL_REG1, fall); - - read_reg(port, SN5S330_INT_TRIP_RISE_REG2, &rise); - read_reg(port, SN5S330_INT_TRIP_FALL_REG2, &fall); - - /* - * VCONN may be latched off due to an overcurrent. Indicate - * when the VCONN overcurrent happens. - */ - if (rise & SN5S330_VCONN_ILIM) - CPRINTS("usb3_ppc: VCONN OC!"); - - /* - * CC overvoltage event. There is not action to take here, but - * log the event. - */ - if (rise & SN5S330_CC1_CON || rise & SN5S330_CC2_CON) - CPRINTS("usb3_ppc: CC OV!"); - - /* Clear the interrupt sources. */ - write_reg(port, SN5S330_INT_TRIP_RISE_REG2, rise); - write_reg(port, SN5S330_INT_TRIP_FALL_REG2, fall); - - } -} -DECLARE_DEFERRED(baseboard_usbc_usb3_handle_interrupt); - -void baseboard_usbc_usb3_irq(void) -{ - hook_call_deferred(&baseboard_usbc_usb3_handle_interrupt_data, 0); -} - -#endif /* defined(GPIO_USBC_UF_ATTACHED_SRC) */ -#endif /* defined(SECTION_IS_RW) */ - diff --git a/baseboard/intelrvp/README.md b/baseboard/intelrvp/README.md deleted file mode 100644 index 39286e130d..0000000000 --- a/baseboard/intelrvp/README.md +++ /dev/null @@ -1,53 +0,0 @@ -This folder is for the baseboard for the board specific files which use Intel -Reference Validation Platform (RVP) for developing the EC and other peripherals -which can be hooked on EC or RVP. - -This baseboard follows the Intel Modular Embedded Controller Card (MECC) -specification for pinout and these pin definitions remain same on all the RVPs. -Chrome MECC spec is standardized for Icelake and successor RVPs hence this -baseboard code is applicable to Icelake and its successors only. - -Following hardware features are supported on MECC header by RVP and can be -validated by software by MECC. - -## MECC version 0.9 features - -1. Power to MECC is provided by RVP (battery + DC Jack + Type C) -2. Power control pins for Intel SOC are added -3. Servo V2 header need to be added by MECC -4. Google H1 chip need to be added by MECC (optional for EC vendors) -5. 2 Type-C port support (SRC/SNK/BC1.2/MUX/Rerimer) -6. 6 Temperature sensors -7. 4 ADC -8. 4 I2C Channels -9. 1 Fan control - -## MECC version 1.0 features - -1. Power to MECC is provided by RVP (battery + DC Jack + Type C) -2. Power control pins for Intel SOC are added -3. Servo V2 header need to be added by MECC -4. Google H1 chip need to be added by MECC (optional for EC vendors) -5. 4 Type-C port support (SRC/SNK/BC1.2/MUX/Rerimer) as Add In Card (AIC) on - RVP -6. Optional 2 Type-C port routed to MECC for integrated TCPC support -7. 6 I2C Channels -8. 2 SMLINK Channels -9. 2 I3C channels - -## MECC version 1.1 features - -1. Power to MECC is provided by RVP (battery + DC Jack + Type C) -2. Power control pins for Intel SOC are added -3. Servo V2 header is added on RVP as an AIC -4. Google H1 chip is added on RVP as an AIC -5. 4 Type-C port support (SRC/SNK/MUX/Rerimer) as an (AIC) -6. Optional 2 Type-C port routed to MECC for integrated TCPC support -7. 6 I2C Channels -8. 2 SMLINK Channels -9. 2 I3C channels -10. 1 Fan control -11. 4 ADC based temperature sensors -12. PECI control -13. I2C based Keyboard is added on RVP as an AIC -14. Both Google & Intel CCD support is added on RVP on Type-C port 0 diff --git a/baseboard/intelrvp/adlrvp.c b/baseboard/intelrvp/adlrvp.c deleted file mode 100644 index 78f4b3613a..0000000000 --- a/baseboard/intelrvp/adlrvp.c +++ /dev/null @@ -1,450 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel ADLRVP board-specific common configuration */ - -#include "charger.h" -#include "common.h" -#include "driver/retimer/bb_retimer_public.h" -#include "hooks.h" -#include "ioexpander.h" -#include "isl9241.h" -#include "pca9675.h" -#include "power/icelake.h" -#include "sn5s330.h" -#include "system.h" -#include "task.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_COMMAND, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_COMMAND, format, ## args) - -/* TCPC AIC GPIO Configuration */ -const struct tcpc_aic_gpio_config_t tcpc_aic_gpios[] = { - [TYPE_C_PORT_0] = { - .tcpc_alert = GPIO_USBC_TCPC_ALRT_P0, - .ppc_alert = GPIO_USBC_TCPC_PPC_ALRT_P0, - .ppc_intr_handler = sn5s330_interrupt, - }, -#if defined(HAS_TASK_PD_C1) - [TYPE_C_PORT_1] = { - .tcpc_alert = GPIO_USBC_TCPC_ALRT_P1, - .ppc_alert = GPIO_USBC_TCPC_PPC_ALRT_P1, - .ppc_intr_handler = sn5s330_interrupt, - }, -#endif -#if defined(HAS_TASK_PD_C2) - [TYPE_C_PORT_2] = { - .tcpc_alert = GPIO_USBC_TCPC_ALRT_P2, - .ppc_alert = GPIO_USBC_TCPC_PPC_ALRT_P2, - .ppc_intr_handler = sn5s330_interrupt, - }, -#endif -#if defined(HAS_TASK_PD_C3) - [TYPE_C_PORT_3] = { - .tcpc_alert = GPIO_USBC_TCPC_ALRT_P3, - .ppc_alert = GPIO_USBC_TCPC_PPC_ALRT_P3, - .ppc_intr_handler = sn5s330_interrupt, - }, -#endif -}; -BUILD_ASSERT(ARRAY_SIZE(tcpc_aic_gpios) == CONFIG_USB_PD_PORT_MAX_COUNT); - -/* USB-C PPC configuration */ -struct ppc_config_t ppc_chips[] = { - [TYPE_C_PORT_0] = { - .i2c_port = I2C_PORT_TYPEC_0, - .i2c_addr_flags = I2C_ADDR_SN5S330_TCPC_AIC_PPC, - .drv = &sn5s330_drv, - }, -#if defined(HAS_TASK_PD_C1) - [TYPE_C_PORT_1] = { - .i2c_port = I2C_PORT_TYPEC_1, - .i2c_addr_flags = I2C_ADDR_SN5S330_TCPC_AIC_PPC, - .drv = &sn5s330_drv - }, -#endif -#if defined(HAS_TASK_PD_C2) - [TYPE_C_PORT_2] = { - .i2c_port = I2C_PORT_TYPEC_2, - .i2c_addr_flags = I2C_ADDR_SN5S330_TCPC_AIC_PPC, - .drv = &sn5s330_drv, - }, -#endif -#if defined(HAS_TASK_PD_C3) - [TYPE_C_PORT_3] = { - .i2c_port = I2C_PORT_TYPEC_3, - .i2c_addr_flags = I2C_ADDR_SN5S330_TCPC_AIC_PPC, - .drv = &sn5s330_drv, - }, -#endif -}; -BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == CONFIG_USB_PD_PORT_MAX_COUNT); -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/* USB-C retimer Configuration */ -struct usb_mux usbc0_tcss_usb_mux = { - .usb_port = TYPE_C_PORT_0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; -#if defined(HAS_TASK_PD_C1) -struct usb_mux usbc1_tcss_usb_mux = { - .usb_port = TYPE_C_PORT_1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; -#endif -#if defined(HAS_TASK_PD_C2) -struct usb_mux usbc2_tcss_usb_mux = { - .usb_port = TYPE_C_PORT_2, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; -#endif -#if defined(HAS_TASK_PD_C3) -struct usb_mux usbc3_tcss_usb_mux = { - .usb_port = TYPE_C_PORT_3, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, -}; -#endif - -/* USB muxes Configuration */ -struct usb_mux usb_muxes[] = { - [TYPE_C_PORT_0] = { - .usb_port = TYPE_C_PORT_0, - .next_mux = &usbc0_tcss_usb_mux, - .driver = &bb_usb_retimer, - .hpd_update = bb_retimer_hpd_update, - .i2c_port = I2C_PORT_TYPEC_0, - .i2c_addr_flags = I2C_PORT0_BB_RETIMER_ADDR, - }, -#if defined(HAS_TASK_PD_C1) - [TYPE_C_PORT_1] = { - .usb_port = TYPE_C_PORT_1, - .next_mux = &usbc1_tcss_usb_mux, - .driver = &bb_usb_retimer, - .hpd_update = bb_retimer_hpd_update, - .i2c_port = I2C_PORT_TYPEC_1, - .i2c_addr_flags = I2C_PORT1_BB_RETIMER_ADDR, - }, -#endif -#if defined(HAS_TASK_PD_C2) - [TYPE_C_PORT_2] = { - .usb_port = TYPE_C_PORT_2, - .next_mux = &usbc2_tcss_usb_mux, - .driver = &bb_usb_retimer, - .hpd_update = bb_retimer_hpd_update, - .i2c_port = I2C_PORT_TYPEC_2, - .i2c_addr_flags = I2C_PORT2_BB_RETIMER_ADDR, - }, -#endif -#if defined(HAS_TASK_PD_C3) - [TYPE_C_PORT_3] = { - .usb_port = TYPE_C_PORT_3, - .next_mux = &usbc3_tcss_usb_mux, - .driver = &bb_usb_retimer, - .hpd_update = bb_retimer_hpd_update, - .i2c_port = I2C_PORT_TYPEC_3, - .i2c_addr_flags = I2C_PORT3_BB_RETIMER_ADDR, - }, -#endif -}; -BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == CONFIG_USB_PD_PORT_MAX_COUNT); - -/* USB Mux Configuration for Soc side BB-Retimers for Dual retimer config */ -struct usb_mux soc_side_bb_retimer0_usb_mux = { - .usb_port = TYPE_C_PORT_0, - .next_mux = &usbc0_tcss_usb_mux, - .driver = &bb_usb_retimer, - .hpd_update = bb_retimer_hpd_update, - .i2c_port = I2C_PORT_TYPEC_0, - .i2c_addr_flags = I2C_PORT0_BB_RETIMER_SOC_ADDR, -}; - -#if defined(HAS_TASK_PD_C1) -struct usb_mux soc_side_bb_retimer1_usb_mux = { - .usb_port = TYPE_C_PORT_1, - .next_mux = &usbc1_tcss_usb_mux, - .driver = &bb_usb_retimer, - .hpd_update = bb_retimer_hpd_update, - .i2c_port = I2C_PORT_TYPEC_1, - .i2c_addr_flags = I2C_PORT1_BB_RETIMER_SOC_ADDR, -}; -#endif - -const struct bb_usb_control bb_controls[] = { - [TYPE_C_PORT_0] = { - .retimer_rst_gpio = IOEX_USB_C0_BB_RETIMER_RST, - .usb_ls_en_gpio = IOEX_USB_C0_BB_RETIMER_LS_EN, - }, -#if defined(HAS_TASK_PD_C1) - [TYPE_C_PORT_1] = { - .retimer_rst_gpio = IOEX_USB_C1_BB_RETIMER_RST, - .usb_ls_en_gpio = IOEX_USB_C1_BB_RETIMER_LS_EN, - }, -#endif -#if defined(HAS_TASK_PD_C2) - [TYPE_C_PORT_2] = { - .retimer_rst_gpio = IOEX_USB_C2_BB_RETIMER_RST, - .usb_ls_en_gpio = IOEX_USB_C2_BB_RETIMER_LS_EN, - }, -#endif -#if defined(HAS_TASK_PD_C3) - [TYPE_C_PORT_3] = { - .retimer_rst_gpio = IOEX_USB_C3_BB_RETIMER_RST, - .usb_ls_en_gpio = IOEX_USB_C3_BB_RETIMER_LS_EN, - }, -#endif -}; -BUILD_ASSERT(ARRAY_SIZE(bb_controls) == CONFIG_USB_PD_PORT_MAX_COUNT); - -/* Cache BB retimer power state */ -static bool cache_bb_enable[CONFIG_USB_PD_PORT_MAX_COUNT]; - -/* Each TCPC have corresponding IO expander and are available in pair */ -struct ioexpander_config_t ioex_config[] = { - [IOEX_C0_PCA9675] = { - .i2c_host_port = I2C_PORT_TYPEC_0, - .i2c_addr_flags = I2C_ADDR_PCA9675_TCPC_AIC_IOEX, - .drv = &pca9675_ioexpander_drv, - }, - [IOEX_C1_PCA9675] = { - .i2c_host_port = I2C_PORT_TYPEC_1, - .i2c_addr_flags = I2C_ADDR_PCA9675_TCPC_AIC_IOEX, - .drv = &pca9675_ioexpander_drv, - }, -#if defined(HAS_TASK_PD_C2) - [IOEX_C2_PCA9675] = { - .i2c_host_port = I2C_PORT_TYPEC_2, - .i2c_addr_flags = I2C_ADDR_PCA9675_TCPC_AIC_IOEX, - .drv = &pca9675_ioexpander_drv, - }, - [IOEX_C3_PCA9675] = { - .i2c_host_port = I2C_PORT_TYPEC_3, - .i2c_addr_flags = I2C_ADDR_PCA9675_TCPC_AIC_IOEX, - .drv = &pca9675_ioexpander_drv, - }, -#endif -}; -BUILD_ASSERT(ARRAY_SIZE(ioex_config) == CONFIG_IO_EXPANDER_PORT_COUNT); - -/* Charger Chips */ -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL9241_ADDR_FLAGS, - .drv = &isl9241_drv, - }, -}; - -void board_overcurrent_event(int port, int is_overcurrented) -{ - /* Port 0 & 1 and 2 & 3 share same line for over current indication */ -#if defined(HAS_TASK_PD_C2) - enum ioex_signal oc_signal = port < TYPE_C_PORT_2 ? - IOEX_USB_C0_C1_OC : IOEX_USB_C2_C3_OC; -#else - enum ioex_signal oc_signal = IOEX_USB_C0_C1_OC; -#endif - - /* Overcurrent indication is active low signal */ - ioex_set_level(oc_signal, is_overcurrented ? 0 : 1); -} - -__override int bb_retimer_power_enable(const struct usb_mux *me, bool enable) -{ - /* - * ADL-P-DDR5 RVP SKU has cascaded retimer topology. - * Ports with cascaded retimers share common load switch and reset pin - * hence no need to set the power state again if the 1st retimer's power - * status has already changed. - */ - if (cache_bb_enable[me->usb_port] == enable) - return EC_SUCCESS; - - cache_bb_enable[me->usb_port] = enable; - - /* Handle retimer's power domain.*/ - if (enable) { - ioex_set_level(bb_controls[me->usb_port].usb_ls_en_gpio, 1); - - /* - * minimum time from VCC to RESET_N de-assertion is 100us - * For boards that don't provide a load switch control, the - * retimer_init() function ensures power is up before calling - * this function. - */ - msleep(1); - ioex_set_level(bb_controls[me->usb_port].retimer_rst_gpio, 1); - - /* - * Allow 1ms time for the retimer to power up lc_domain - * which powers I2C controller within retimer - */ - msleep(1); - - } else { - ioex_set_level(bb_controls[me->usb_port].retimer_rst_gpio, 0); - msleep(1); - ioex_set_level(bb_controls[me->usb_port].usb_ls_en_gpio, 0); - } - return EC_SUCCESS; -} - -static void board_connect_c0_sbu_deferred(void) -{ - int ccd_intr_level = gpio_get_level(GPIO_CCD_MODE_ODL); - - if (ccd_intr_level) { - /* Default set the SBU lines to AUX mode on TCPC-AIC */ - ioex_set_level(IOEX_USB_C0_USB_MUX_CNTRL_1, 0); - ioex_set_level(IOEX_USB_C0_USB_MUX_CNTRL_0, 0); - } else { - /* Set the SBU lines to CCD mode on TCPC-AIC */ - ioex_set_level(IOEX_USB_C0_USB_MUX_CNTRL_1, 1); - ioex_set_level(IOEX_USB_C0_USB_MUX_CNTRL_0, 0); - } -} -DECLARE_DEFERRED(board_connect_c0_sbu_deferred); -/* Make sure SBU are routed to CCD or AUX based on CCD status at init */ -DECLARE_HOOK(HOOK_INIT, board_connect_c0_sbu_deferred, HOOK_PRIO_INIT_I2C + 2); - -void board_connect_c0_sbu(enum gpio_signal s) -{ - hook_call_deferred(&board_connect_c0_sbu_deferred_data, 0); -} - -static void enable_h1_irq(void) -{ - gpio_enable_interrupt(GPIO_CCD_MODE_ODL); -} -DECLARE_HOOK(HOOK_INIT, enable_h1_irq, HOOK_PRIO_LAST); - -static void configure_retimer_usbmux(void) -{ - switch (ADL_RVP_BOARD_ID(board_get_version())) { - case ADLN_LP5_ERB_SKU_BOARD_ID: - case ADLN_LP5_RVP_SKU_BOARD_ID: - /* No retimer on Port0 & Port1 */ - usb_muxes[TYPE_C_PORT_0].driver = NULL; -#if defined(HAS_TASK_PD_C1) - usb_muxes[TYPE_C_PORT_1].driver = NULL; -#endif - break; - - case ADLP_LP5_T4_RVP_SKU_BOARD_ID: - /* No retimer on Port-2 */ -#if defined(HAS_TASK_PD_C2) - usb_muxes[TYPE_C_PORT_2].driver = NULL; -#endif - break; - - case ADLP_DDR5_RVP_SKU_BOARD_ID: - /* - * ADL-P-DDR5 RVP has dual BB-retimers for port0 & port1. - * Change the default usb mux config on runtime to support - * dual retimer topology. - */ - usb_muxes[TYPE_C_PORT_0].next_mux - = &soc_side_bb_retimer0_usb_mux; -#if defined(HAS_TASK_PD_C1) - usb_muxes[TYPE_C_PORT_1].next_mux - = &soc_side_bb_retimer1_usb_mux; -#endif - break; - - /* Add additional board SKUs */ - - default: - break; - } -} -DECLARE_HOOK(HOOK_INIT, configure_retimer_usbmux, HOOK_PRIO_INIT_I2C + 1); - -/******************************************************************************/ -/* PWROK signal configuration */ -/* - * On ADLRVP, SYS_PWROK_EC is an output controlled by EC and uses ALL_SYS_PWRGD - * as input. - */ -const struct intel_x86_pwrok_signal pwrok_signal_assert_list[] = { - { - .gpio = GPIO_SYS_PWROK_EC, - .delay_ms = 3, - }, -}; -const int pwrok_signal_assert_count = ARRAY_SIZE(pwrok_signal_assert_list); - -const struct intel_x86_pwrok_signal pwrok_signal_deassert_list[] = { - { - .gpio = GPIO_SYS_PWROK_EC, - }, -}; -const int pwrok_signal_deassert_count = ARRAY_SIZE(pwrok_signal_assert_list); - -/* - * Returns board information (board id[7:0] and Fab id[15:8]) on success - * -1 on error. - */ -__override int board_get_version(void) -{ - /* Cache the ADLRVP board ID */ - static int adlrvp_board_id; - - int port0, port1; - int fab_id, board_id, bom_id; - - /* Board ID is already read */ - if (adlrvp_board_id) - return adlrvp_board_id; - - if (ioexpander_read_intelrvp_version(&port0, &port1)) - return -1; - /* - * Port0: bit 0 - BOM ID(2) - * bit 2:1 - FAB ID(1:0) + 1 - * Port1: bit 7:6 - BOM ID(1:0) - * bit 5:0 - BOARD ID(5:0) - */ - bom_id = ((port1 & 0xC0) >> 6) | ((port0 & 0x01) << 2); - fab_id = ((port0 & 0x06) >> 1) + 1; - board_id = port1 & 0x3F; - - CPRINTS("BID:0x%x, FID:0x%x, BOM:0x%x", board_id, fab_id, bom_id); - - adlrvp_board_id = board_id | (fab_id << 8); - return adlrvp_board_id; -} - -__override bool board_is_tbt_usb4_port(int port) -{ - bool tbt_usb4 = true; - - switch (ADL_RVP_BOARD_ID(board_get_version())) { - case ADLN_LP5_ERB_SKU_BOARD_ID: - case ADLN_LP5_RVP_SKU_BOARD_ID: - /* No retimer on both ports */ - tbt_usb4 = false; - break; - - case ADLP_LP5_T4_RVP_SKU_BOARD_ID: - /* No retimer on Port-2 hence no platform level AUX & LSx mux */ -#if defined(HAS_TASK_PD_C2) - if (port == TYPE_C_PORT_2) - tbt_usb4 = false; -#endif - break; - - /* Add additional board SKUs */ - default: - break; - } - - return tbt_usb4; -} diff --git a/baseboard/intelrvp/adlrvp.h b/baseboard/intelrvp/adlrvp.h deleted file mode 100644 index 31bfc5aded..0000000000 --- a/baseboard/intelrvp/adlrvp.h +++ /dev/null @@ -1,193 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel ADL-RVP specific configuration */ - -#ifndef __ADLRVP_BOARD_H -#define __ADLRVP_BOARD_H - -/* Temperature sensor */ -#define CONFIG_TEMP_SENSOR - -#include "baseboard.h" - -/* RVP Board ids */ -#define CONFIG_BOARD_VERSION_GPIO -#define ADLN_LP5_ERB_SKU_BOARD_ID 0x06 -#define ADLN_LP5_RVP_SKU_BOARD_ID 0x07 -#define ADLP_DDR5_RVP_SKU_BOARD_ID 0x12 -#define ADLP_LP5_T4_RVP_SKU_BOARD_ID 0x13 -#define ADL_RVP_BOARD_ID(id) ((id) & 0x3F) - -/* MECC config */ -#define CONFIG_INTEL_RVP_MECC_VERSION_1_0 - -/* Support early firmware selection */ -#define CONFIG_VBOOT_EFS2 - -/* Chipset */ -#define CONFIG_CHIPSET_ALDERLAKE - -/* USB PD config */ -#if defined(HAS_TASK_PD_C3) -#define CONFIG_USB_PD_PORT_MAX_COUNT 4 -#elif defined(HAS_TASK_PD_C2) -#define CONFIG_USB_PD_PORT_MAX_COUNT 3 -#elif defined(HAS_TASK_PD_C1) -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#else -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#endif -#define CONFIG_USB_MUX_VIRTUAL -#define PD_MAX_POWER_MW 100000 - -#define CONFIG_USB_PD_REQUIRE_AP_MODE_ENTRY - -/* TCPC AIC config */ -/* Support NXP PCA9675 I/O expander. */ -#define CONFIG_IO_EXPANDER -#define CONFIG_IO_EXPANDER_PCA9675 -#define I2C_ADDR_PCA9675_TCPC_AIC_IOEX 0x21 - -/* DC Jack charge ports */ -#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT -#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 -#define DEDICATED_CHARGE_PORT CONFIG_USB_PD_PORT_MAX_COUNT - -/* PPC */ -#define CONFIG_USBC_PPC_SN5S330 -#define CONFIG_USB_PD_VBUS_DETECT_PPC -#define CONFIG_USB_PD_DISCHARGE_PPC -#define I2C_ADDR_SN5S330_TCPC_AIC_PPC 0x40 - -/* TCPC */ -#define CONFIG_USB_PD_DISCHARGE -#define CONFIG_USB_PD_TCPM_FUSB302 -#define I2C_ADDR_FUSB302_TCPC_AIC 0x22 - -/* Config BB retimer */ -#define CONFIG_USBC_RETIMER_INTEL_BB -#define CONFIG_USBC_RETIMER_FW_UPDATE - -/* Connector side BB retimers */ -#define I2C_PORT0_BB_RETIMER_ADDR 0x56 -#if defined(HAS_TASK_PD_C1) -#define I2C_PORT1_BB_RETIMER_ADDR 0x57 -#endif -#if defined(HAS_TASK_PD_C2) -#define I2C_PORT2_BB_RETIMER_ADDR 0x58 -#endif -#if defined(HAS_TASK_PD_C3) -#define I2C_PORT3_BB_RETIMER_ADDR 0x59 -#endif - -/* SOC side BB retimers (dual retimer config) */ -#define I2C_PORT0_BB_RETIMER_SOC_ADDR 0x54 -#if defined(HAS_TASK_PD_C1) -#define I2C_PORT1_BB_RETIMER_SOC_ADDR 0x55 -#endif - -/* I2C EEPROM */ -#define I2C_ADDR_EEPROM_FLAGS 0x50 -#define I2C_PORT_EEPROM I2C_PORT_PCA9555_BOARD_ID_GPIO - -/* Enable CBI */ -#define CONFIG_CBI_EEPROM - -/* Configure mux at runtime */ -#define CONFIG_USB_MUX_RUNTIME_CONFIG - -/* Enable VCONN */ -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Enabling Thunderbolt-compatible mode */ -#define CONFIG_USB_PD_TBT_COMPAT_MODE - -/* Enabling USB4 mode */ -#define CONFIG_USB_PD_USB4 - -/* Enable low power mode */ -#define CONFIG_USB_PD_TCPC_LOW_POWER - -/* Config Fan */ -#define CONFIG_FANS 1 -#define BOARD_FAN_MIN_RPM 3000 -#define BOARD_FAN_MAX_RPM 10000 - -/* Charger */ -#define CONFIG_CHARGER_ISL9241 - -/* Port 80 */ -#define PORT80_I2C_ADDR MAX695X_I2C_ADDR1_FLAGS - -/* Board Id */ -#define I2C_ADDR_PCA9555_BOARD_ID_GPIO 0x22 - -/* - * Frequent watchdog timer resets are seen, with the - * increase in number of type-c ports. So increase - * the timer value to support more type-c ports. - */ -#ifdef VARIANT_INTELRVP_EC_IT8320 -#if defined(HAS_TASK_PD_C2) && defined(HAS_TASK_PD_C3) -#undef CONFIG_WATCHDOG_PERIOD_MS -#define CONFIG_WATCHDOG_PERIOD_MS 4000 -#endif -#endif - -/* - * Enable support for battery hostcmd, supporting longer strings. - * Support for EC_CMD_BATTERY_GET_STATIC version 1. - */ -#define CONFIG_BATTERY_V2 -#define CONFIG_BATTERY_COUNT 1 -#define CONFIG_HOSTCMD_BATTERY_V2 - -#ifndef __ASSEMBLER__ - -enum adlrvp_charge_ports { - TYPE_C_PORT_0, -#if defined(HAS_TASK_PD_C1) - TYPE_C_PORT_1, -#endif -#if defined(HAS_TASK_PD_C2) - TYPE_C_PORT_2, -#endif -#if defined(HAS_TASK_PD_C3) - TYPE_C_PORT_3, -#endif -}; - -/* - * Each Type-C add in card has two I/O expanders hence even if one Type-C port - * is enabled other I/O expander is available for usage. - */ -enum ioex_port { - IOEX_C0_PCA9675, - IOEX_C1_PCA9675, -#if defined(HAS_TASK_PD_C2) - IOEX_C2_PCA9675, - IOEX_C3_PCA9675, -#endif - IOEX_PORT_COUNT -}; -#define CONFIG_IO_EXPANDER_PORT_COUNT IOEX_PORT_COUNT - -enum battery_type { - BATTERY_GETAC_SMP_HHP_408, - BATTERY_TYPE_COUNT, -}; - -void espi_reset_pin_asserted_interrupt(enum gpio_signal signal); -void extpower_interrupt(enum gpio_signal signal); -void ppc_interrupt(enum gpio_signal signal); -void tcpc_alert_event(enum gpio_signal signal); -void board_connect_c0_sbu(enum gpio_signal s); -int board_get_version(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __ADLRVP_BOARD_H */ diff --git a/baseboard/intelrvp/adlrvp_battery2s.c b/baseboard/intelrvp/adlrvp_battery2s.c deleted file mode 100644 index bc61b407a0..0000000000 --- a/baseboard/intelrvp/adlrvp_battery2s.c +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery_fuel_gauge.h" -#include "battery_smart.h" -#include "common.h" -#include "util.h" - -const struct board_batt_params board_battery_info[] = { - /* - * Getac Battery (Getac SMP-HHP-408) Information - * Fuel gauge: BQ40Z50-R3 - */ - [BATTERY_GETAC_SMP_HHP_408] = { - .fuel_gauge = { - .manuf_name = "Getac", - .ship_mode = { - .reg_addr = 0x00, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x6000, - .disconnect_val = 0x6000, - } - }, - .batt_info = { - .voltage_max = 8800, /* mV */ - .voltage_normal = 7700, - .voltage_min = 6000, - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 45, - .discharging_min_c = 0, - .discharging_max_c = 60, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_GETAC_SMP_HHP_408; - diff --git a/baseboard/intelrvp/adlrvp_battery3s.c b/baseboard/intelrvp/adlrvp_battery3s.c deleted file mode 100644 index 315d5c247e..0000000000 --- a/baseboard/intelrvp/adlrvp_battery3s.c +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery_fuel_gauge.h" -#include "battery_smart.h" -#include "common.h" -#include "util.h" - -const struct board_batt_params board_battery_info[] = { - /* - * Getac Battery (Getac SMP-HHP-408) Information - * Fuel gauge: BQ40Z50-R3 - */ - [BATTERY_GETAC_SMP_HHP_408] = { - .fuel_gauge = { - .manuf_name = "Getac", - .ship_mode = { - .reg_addr = 0x00, - .reg_data = { 0x0010, 0x0010 }, - }, - .fet = { - .reg_addr = 0x0, - .reg_mask = 0x6000, - .disconnect_val = 0x6000, - } - }, - .batt_info = { - .voltage_max = 13050, /* mV */ - .voltage_normal = 11400, - .voltage_min = 9000, - .precharge_current = 256, /* mA */ - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 45, - .discharging_min_c = 0, - .discharging_max_c = 60, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); - -const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_GETAC_SMP_HHP_408; - diff --git a/baseboard/intelrvp/adlrvp_ioex_gpio.inc b/baseboard/intelrvp/adlrvp_ioex_gpio.inc deleted file mode 100644 index e5522b02b3..0000000000 --- a/baseboard/intelrvp/adlrvp_ioex_gpio.inc +++ /dev/null @@ -1,31 +0,0 @@ -/* -*- mode:c -*- - * - * Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -IOEX(USB_C0_BB_RETIMER_RST, EXPIN(IOEX_C0_PCA9675, 0, PCA9675_IO_P00), GPIO_OUT_LOW) -IOEX(USB_C0_BB_RETIMER_LS_EN, EXPIN(IOEX_C0_PCA9675, 0, PCA9675_IO_P01), GPIO_OUT_LOW) -IOEX(USB_C0_USB_MUX_CNTRL_1, EXPIN(IOEX_C0_PCA9675, 0, PCA9675_IO_P04), GPIO_OUT_LOW) -IOEX(USB_C0_USB_MUX_CNTRL_0, EXPIN(IOEX_C0_PCA9675, 0, PCA9675_IO_P05), GPIO_OUT_LOW) - -IOEX(USB_C1_BB_RETIMER_RST, EXPIN(IOEX_C1_PCA9675, 0, PCA9675_IO_P00), GPIO_OUT_LOW) -IOEX(USB_C1_BB_RETIMER_LS_EN, EXPIN(IOEX_C1_PCA9675, 0, PCA9675_IO_P01), GPIO_OUT_LOW) -IOEX(USB_C0_C1_OC, EXPIN(IOEX_C1_PCA9675, 0, PCA9675_IO_P10), GPIO_OUT_HIGH) - -#if defined(HAS_TASK_PD_C2) -IOEX(USB_C2_BB_RETIMER_RST, EXPIN(IOEX_C2_PCA9675, 0, PCA9675_IO_P00), GPIO_OUT_LOW) -IOEX(USB_C2_BB_RETIMER_LS_EN, EXPIN(IOEX_C2_PCA9675, 0, PCA9675_IO_P01), GPIO_OUT_LOW) -IOEX(USB_C2_USB_MUX_CNTRL_1, EXPIN(IOEX_C2_PCA9675, 0, PCA9675_IO_P04), GPIO_OUT_LOW) -IOEX(USB_C2_USB_MUX_CNTRL_0, EXPIN(IOEX_C2_PCA9675, 0, PCA9675_IO_P05), GPIO_OUT_LOW) - -IOEX(USB_C3_BB_RETIMER_RST, EXPIN(IOEX_C3_PCA9675, 0, PCA9675_IO_P00), GPIO_OUT_LOW) -IOEX(USB_C3_BB_RETIMER_LS_EN, EXPIN(IOEX_C3_PCA9675, 0, PCA9675_IO_P01), GPIO_OUT_LOW) -IOEX(USB_C2_C3_OC, EXPIN(IOEX_C3_PCA9675, 0, PCA9675_IO_P10), GPIO_OUT_HIGH) -#endif - -/* ADL-RVP has custom GPIO implementation for reading board ID */ -UNIMPLEMENTED(BOARD_VERSION1) -UNIMPLEMENTED(BOARD_VERSION2) -UNIMPLEMENTED(BOARD_VERSION3) diff --git a/baseboard/intelrvp/baseboard.c b/baseboard/intelrvp/baseboard.c deleted file mode 100644 index 1e7b778c12..0000000000 --- a/baseboard/intelrvp/baseboard.c +++ /dev/null @@ -1,159 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel-RVP family-specific configuration */ - -#include "adc_chip.h" -#include "charge_state.h" -#include "espi.h" -#include "fan.h" -#include "hooks.h" -#include "pca9555.h" -#include "peci.h" -#include "power.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" -#include "timer.h" - -/* Wake-up pins for hibernate */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -#ifdef CONFIG_TEMP_SENSOR -/* Temperature sensors */ -const struct temp_sensor_t temp_sensors[] = { - [TEMP_SNS_AMBIENT] = { - .name = "Ambient", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v0_22k6_47k_4050b, - .idx = ADC_TEMP_SNS_AMBIENT, - }, - [TEMP_SNS_BATTERY] = { - .name = "Battery", - .type = TEMP_SENSOR_TYPE_BATTERY, - .read = charge_get_battery_temp, - .idx = 0, - }, - [TEMP_SNS_DDR] = { - .name = "DDR", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v0_22k6_47k_4050b, - .idx = ADC_TEMP_SNS_DDR, - }, -#ifdef CONFIG_PECI - [TEMP_SNS_PECI] = { - .name = "PECI", - .type = TEMP_SENSOR_TYPE_CPU, - .read = peci_temp_sensor_get_val, - .idx = 0, - }, -#endif /* CONFIG_PECI */ - [TEMP_SNS_SKIN] = { - .name = "Skin", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v0_22k6_47k_4050b, - .idx = ADC_TEMP_SNS_SKIN, - }, - [TEMP_SNS_VR] = { - .name = "VR", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v0_22k6_47k_4050b, - .idx = ADC_TEMP_SNS_VR, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -const static struct ec_thermal_config thermal_a = { - .temp_host = { - [EC_TEMP_THRESH_WARN] = 0, - [EC_TEMP_THRESH_HIGH] = C_TO_K(75), - [EC_TEMP_THRESH_HALT] = C_TO_K(80), - }, - .temp_host_release = { - [EC_TEMP_THRESH_WARN] = 0, - [EC_TEMP_THRESH_HIGH] = C_TO_K(65), - [EC_TEMP_THRESH_HALT] = 0, - }, - .temp_fan_off = C_TO_K(15), - .temp_fan_max = C_TO_K(50), -}; - -struct ec_thermal_config thermal_params[] = { - [TEMP_SNS_AMBIENT] = thermal_a, - [TEMP_SNS_BATTERY] = thermal_a, - [TEMP_SNS_DDR] = thermal_a, -#ifdef CONFIG_PECI - [TEMP_SNS_PECI] = thermal_a, -#endif - [TEMP_SNS_SKIN] = thermal_a, - [TEMP_SNS_VR] = thermal_a, -}; -BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); -#endif /* CONFIG_TEMP_SENSOR */ - -#ifdef CONFIG_FANS -/* Physical fan config */ -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = 0, - .pgood_gpio = GPIO_ALL_SYS_PWRGD, - .enable_gpio = GPIO_FAN_POWER_EN, -}; - -/* Physical fan rpm config */ -const struct fan_rpm fan_rpm_0 = { - .rpm_min = BOARD_FAN_MIN_RPM, - .rpm_start = BOARD_FAN_MIN_RPM, - .rpm_max = BOARD_FAN_MAX_RPM, -}; - -/* FAN channels */ -const struct fan_t fans[] = { - [FAN_CH_0] = { - .conf = &fan_conf_0, - .rpm = &fan_rpm_0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); -#endif /* CONFIG_FANS */ - -static void board_init(void) -{ - /* Enable SOC SPI */ - gpio_set_level(GPIO_EC_SPI_OE_N, 1); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_LAST); - -static void board_interrupts_init(void) -{ - /* DC Jack interrupt */ - gpio_enable_interrupt(GPIO_DC_JACK_PRESENT); -} -DECLARE_HOOK(HOOK_INIT, board_interrupts_init, HOOK_PRIO_FIRST); - -int ioexpander_read_intelrvp_version(int *port0, int *port1) -{ - if (pca9555_read(I2C_PORT_PCA9555_BOARD_ID_GPIO, - I2C_ADDR_PCA9555_BOARD_ID_GPIO, - PCA9555_CMD_INPUT_PORT_0, port0)) - return -1; - - return pca9555_read(I2C_PORT_PCA9555_BOARD_ID_GPIO, - I2C_ADDR_PCA9555_BOARD_ID_GPIO, - PCA9555_CMD_INPUT_PORT_1, port1); -} - -__override void intel_x86_sys_reset_delay(void) -{ - /* - * From MAX6818 Data sheet, Range of 'Debounce Duaration' is - * Minimum - 20 ms, Typical - 40 ms, Maximum - 80 ms. - */ - udelay(60 * MSEC); -} diff --git a/baseboard/intelrvp/baseboard.h b/baseboard/intelrvp/baseboard.h deleted file mode 100644 index de4cb671ac..0000000000 --- a/baseboard/intelrvp/baseboard.h +++ /dev/null @@ -1,274 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP board-specific configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -#include "compiler.h" -#include "stdbool.h" - -#ifdef VARIANT_INTELRVP_EC_IT8320 - #include "ite_ec.h" -#elif defined(VARIANT_INTELRVP_EC_MCHP) - #include "mchp_ec.h" -#elif defined(VARIANT_INTELRVP_EC_NPCX) - #include "npcx_ec.h" -#else - #error "Define EC chip variant" -#endif - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#define CONFIG_SYSTEM_UNLOCKED - -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) -#undef CONFIG_HOSTCMD_DEBUG_MODE - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -/* EC console commands */ -#define CONFIG_CMD_CHARGER_DUMP -#define CONFIG_CMD_KEYBOARD -#define CONFIG_CMD_USB_PD_CABLE -#define CONFIG_CMD_USB_PD_PE - -/* Host commands */ -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_HOSTCMD_AP_RESET -#define CONFIG_HOSTCMD_PD_CONTROL - -/* Port80 display */ -#define CONFIG_MAX695X_SEVEN_SEGMENT_DISPLAY - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART - -/* Charger */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_SENSE_RESISTOR 5 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 200 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_TRICKLE_CHARGING - -/* - * Don't allow the system to boot to S0 when the battery is low and unable to - * communicate on locked systems (which haven't PD negotiated) - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 15001 - -/* Keyboard */ - -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2 - -/* UART */ -#define CONFIG_LOW_POWER_IDLE - -/* USB-A config */ - -/* BC1.2 config */ -#ifdef HAS_TASK_USB_CHG_P0 - #define CONFIG_CHARGE_RAMP_HW -#endif - -/* Enable USB-PD REV 3.0 */ -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PID 0x8086 - -/* USB PD config */ -#if defined(BOARD_TGLRVPU_ITE_TCPMV1) || defined(BOARD_TGLRVPY_ITE_TCPMV1) - #define CONFIG_USB_PD_TCPMV1 - #define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 -#else - #define CONFIG_USB_DRP_ACC_TRYSRC - #define CONFIG_USB_PD_DECODE_SOP - #define CONFIG_USB_PD_TCPMV2 - #define CONFIG_USB_PD_TCPM_MUX -#endif -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_POWER_DELIVERY - -/* USB MUX */ -#ifdef CONFIG_USB_MUX_VIRTUAL - #define CONFIG_HOSTCMD_LOCATE_CHIP -#endif -#define CONFIG_USBC_SS_MUX - -/* SoC / PCH */ -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE - -/* EC */ -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_WP_ALWAYS - -/* Tablet mode */ -#define CONFIG_TABLET_MODE -#define CONFIG_GMR_TABLET_MODE - -/* Verified boot */ -#define CONFIG_CRC8 -#define CONFIG_SHA256_UNROLLED -#define CONFIG_VBOOT_HASH - -/* - * Enable 1 slot of secure temporary storage to support - * suspend/resume with read/write memory training. - */ -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -/* Temperature sensor */ -#ifdef CONFIG_TEMP_SENSOR - #define CONFIG_STEINHART_HART_3V0_22K6_47K_4050B - #define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A - #define CONFIG_THERMISTOR - #define CONFIG_THROTTLE_AP -#ifdef CONFIG_PECI - #define CONFIG_PECI_COMMON -#endif /* CONFIG_PECI */ -#endif /* CONFIG_TEMP_SENSOR */ - -/* I2C ports */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER - -/* EC exclude modules */ - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "module_id.h" -#include "registers.h" - -FORWARD_DECLARE_ENUM(tcpc_rp_value); - -/* PWM channels */ -enum pwm_channel { - PWM_CH_FAN, - PWM_CH_COUNT -}; - -/* FAN channels */ -enum fan_channel { - FAN_CH_0, - FAN_CH_COUNT, -}; - -/* ADC channels */ -enum adc_channel { - ADC_TEMP_SNS_AMBIENT, - ADC_TEMP_SNS_DDR, - ADC_TEMP_SNS_SKIN, - ADC_TEMP_SNS_VR, - ADC_CH_COUNT, -}; - -/* Temperature sensors */ -enum temp_sensor_id { - TEMP_SNS_AMBIENT, - TEMP_SNS_BATTERY, - TEMP_SNS_DDR, -#ifdef CONFIG_PECI - TEMP_SNS_PECI, -#endif - TEMP_SNS_SKIN, - TEMP_SNS_VR, - TEMP_SENSOR_COUNT, -}; - -/* TODO(b:132652892): Verify the below numbers. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* Define typical operating power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_VOLTAGE_MV 20000 -#define PD_MAX_CURRENT_MA ((PD_MAX_POWER_MW/PD_MAX_VOLTAGE_MV) * 1000) -#define DC_JACK_MAX_VOLTAGE_MV 19000 - -/* TCPC gpios */ -struct tcpc_gpio_t { - enum gpio_signal pin; - uint8_t pin_pol; -}; - -/* VCONN gpios */ -struct vconn_gpio_t { - enum gpio_signal cc1_pin; - enum gpio_signal cc2_pin; - uint8_t pin_pol; -}; - -struct tcpc_gpio_config_t { - /* VBUS interrput */ - struct tcpc_gpio_t vbus; - /* Source enable */ - struct tcpc_gpio_t src; - /* Sink enable */ - struct tcpc_gpio_t snk; -#if defined(CONFIG_USBC_VCONN) && defined(CHIP_FAMILY_IT83XX) - /* Enable VCONN */ - struct vconn_gpio_t vconn; -#endif - /* Enable source ILIM */ - struct tcpc_gpio_t src_ilim; -}; -extern const struct tcpc_gpio_config_t tcpc_gpios[]; - -struct tcpc_aic_gpio_config_t { - /* TCPC interrupt */ - enum gpio_signal tcpc_alert; - /* PPC interrupt */ - enum gpio_signal ppc_alert; - /* PPC interrupt handler */ - void (*ppc_intr_handler)(int port); -}; -extern const struct tcpc_aic_gpio_config_t tcpc_aic_gpios[]; - -void board_charging_enable(int port, int enable); -void board_vbus_enable(int port, int enable); -void board_set_vbus_source_current_limit(int port, enum tcpc_rp_value rp); -int ioexpander_read_intelrvp_version(int *port0, int *port1); -void board_dc_jack_interrupt(enum gpio_signal signal); -void tcpc_alert_event(enum gpio_signal signal); -bool is_typec_port(int port); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/intelrvp/bc12.c b/baseboard/intelrvp/bc12.c deleted file mode 100644 index 9f212fba4e..0000000000 --- a/baseboard/intelrvp/bc12.c +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP BC1.2 specific configuration */ - -#include "common.h" -#include "max14637.h" - -/* BC1.2 chip Configuration */ -#ifdef CONFIG_BC12_DETECT_MAX14637 -const struct max14637_config_t max14637_config[] = { - [TYPE_C_PORT_0] = { - .chip_enable_pin = GPIO_USB_C0_BC12_VBUS_ON_ODL, - .chg_det_pin = GPIO_USB_C0_BC12_CHG_DET_L, - .flags = MAX14637_FLAGS_CHG_DET_ACTIVE_LOW, - }, -#ifdef HAS_TASK_PD_C1 - [TYPE_C_PORT_1] = { - .chip_enable_pin = GPIO_USB_C1_BC12_VBUS_ON_ODL, - .chg_det_pin = GPIO_USB_C1_BC12_CHG_DET_L, - .flags = MAX14637_FLAGS_CHG_DET_ACTIVE_LOW, - }, -#endif /* HAS_TASK_PD_C1 */ -}; -BUILD_ASSERT(ARRAY_SIZE(max14637_config) == CONFIG_USB_PD_PORT_MAX_COUNT); -#endif /* CONFIG_BC12_DETECT_MAX14637 */ diff --git a/baseboard/intelrvp/build.mk b/baseboard/intelrvp/build.mk deleted file mode 100644 index 6abf8bbe0c..0000000000 --- a/baseboard/intelrvp/build.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -*- makefile -*- -# Copyright 2018 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -#Intel RVP common files -baseboard-y=baseboard.o -baseboard-$(CONFIG_LED_COMMON)+=led.o led_states.o - -ifneq ($(CONFIG_USB_POWER_DELIVERY),) -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=chg_usb_pd.o -baseboard-$(CONFIG_INTEL_RVP_MECC_VERSION_0_9)+=chg_usb_pd_mecc_0_9.o -baseboard-$(CONFIG_INTEL_RVP_MECC_VERSION_0_9)+=usb_pd_policy_mecc_0_9.o -baseboard-$(CONFIG_INTEL_RVP_MECC_VERSION_1_0)+=chg_usb_pd_mecc_1_0.o -baseboard-$(CONFIG_INTEL_RVP_MECC_VERSION_1_0)+=usb_pd_policy_mecc_1_0.o -endif - -#EC specific files -baseboard-$(VARIANT_INTELRVP_EC_IT8320)+=ite_ec.o -baseboard-$(VARIANT_INTELRVP_EC_MCHP)+=mchp_ec.o -baseboard-$(VARIANT_INTELRVP_EC_NPCX)+=npcx_ec.o - -#BC1.2 specific files -baseboard-$(CONFIG_BC12_DETECT_MAX14637)+=bc12.o - -#Common board specific files -ifneq ($(filter y,$(BOARD_ADLRVPP_ITE) $(BOARD_ADLRVPM_ITE) \ - $(BOARD_ADLRVPP_MCHP1521) $(BOARD_ADLRVPP_NPCX) \ - $(BOARD_ADLRVPP_MCHP1727)),) -baseboard-y+=adlrvp.o -ifneq ($(BOARD_ADLRVPM_ITE),) -baseboard-$(CONFIG_BATTERY_SMART)+=adlrvp_battery2s.o -else -baseboard-$(CONFIG_BATTERY_SMART)+=adlrvp_battery3s.o -endif -endif diff --git a/baseboard/intelrvp/chg_usb_pd.c b/baseboard/intelrvp/chg_usb_pd.c deleted file mode 100644 index 9f64cdd4e7..0000000000 --- a/baseboard/intelrvp/chg_usb_pd.c +++ /dev/null @@ -1,130 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common USB PD charge configuration */ - -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "hooks.h" -#include "tcpm/tcpci.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -bool is_typec_port(int port) -{ -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 - return !(port == DEDICATED_CHARGE_PORT || port == CHARGE_PORT_NONE); -#else - return !(port == CHARGE_PORT_NONE); -#endif /* CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 */ -} - -static inline int board_dc_jack_present(void) -{ -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 - return gpio_get_level(GPIO_DC_JACK_PRESENT); -#else - return 0; -#endif -} - -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 -static void board_dc_jack_handle(void) -{ - struct charge_port_info charge_dc_jack; - - /* System is booted from DC Jack */ - if (board_dc_jack_present()) { - charge_dc_jack.current = (PD_MAX_POWER_MW * 1000) / - DC_JACK_MAX_VOLTAGE_MV; - charge_dc_jack.voltage = DC_JACK_MAX_VOLTAGE_MV; - } else { - charge_dc_jack.current = 0; - charge_dc_jack.voltage = USB_CHARGER_VOLTAGE_MV; - } - - charge_manager_update_charge(CHARGE_SUPPLIER_DEDICATED, - DEDICATED_CHARGE_PORT, &charge_dc_jack); -} -#endif - -void board_dc_jack_interrupt(enum gpio_signal signal) -{ -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 - board_dc_jack_handle(); -#endif -} - -static void board_charge_init(void) -{ - int port, supplier; - struct charge_port_info charge_init = { - .current = 0, - .voltage = USB_CHARGER_VOLTAGE_MV, - }; - - /* Initialize all charge suppliers to seed the charge manager */ - for (port = 0; port < CHARGE_PORT_COUNT; port++) { - for (supplier = 0; supplier < CHARGE_SUPPLIER_COUNT; supplier++) - charge_manager_update_charge(supplier, port, - &charge_init); - } - -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 - board_dc_jack_handle(); -#endif /* CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 */ -} -DECLARE_HOOK(HOOK_INIT, board_charge_init, HOOK_PRIO_DEFAULT); - -int board_set_active_charge_port(int port) -{ - int i; - /* charge port is a realy physical port */ - int is_real_port = (port >= 0 && - port < CHARGE_PORT_COUNT); - /* check if we are source vbus on that port */ - int source = board_vbus_source_enabled(port); - - if (is_real_port && source) { - CPRINTS("Skip enable p%d", port); - return EC_ERROR_INVAL; - } - -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 - /* - * Do not enable Type-C port if the DC Jack is present. - * When the Type-C is active port, hardware circuit will - * block DC jack from enabling +VADP_OUT. - */ - if (port != DEDICATED_CHARGE_PORT && board_dc_jack_present()) { - CPRINTS("DC Jack present, Skip enable p%d", port); - return EC_ERROR_INVAL; - } -#endif /* CONFIG_DEDICATED_CHARGE_PORT_COUNT */ - - /* Make sure non-charging ports are disabled */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (i == port) - continue; - - board_charging_enable(i, 0); - } - - /* Enable charging port */ - if (is_typec_port(port)) - board_charging_enable(port, 1); - - CPRINTS("New chg p%d", port); - - return EC_SUCCESS; -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), charge_mv); -} diff --git a/baseboard/intelrvp/chg_usb_pd_mecc_0_9.c b/baseboard/intelrvp/chg_usb_pd_mecc_0_9.c deleted file mode 100644 index fa9f1e147f..0000000000 --- a/baseboard/intelrvp/chg_usb_pd_mecc_0_9.c +++ /dev/null @@ -1,120 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel-RVP family-specific configuration */ - -#include "console.h" -#include "hooks.h" -#include "tcpm/tcpci.h" -#include "system.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -/* Reset PD MCU */ -void board_reset_pd_mcu(void) -{ - /* Add code if TCPC chips need a reset */ -} - -int board_vbus_source_enabled(int port) -{ - int src_en = 0; - - /* Only Type-C ports can source VBUS */ - if (is_typec_port(port)) { - src_en = gpio_get_level(tcpc_gpios[port].src.pin); - - src_en = tcpc_gpios[port].src.pin_pol ? src_en : !src_en; - } - - return src_en; -} - -void board_set_vbus_source_current_limit(int port, enum tcpc_rp_value rp) -{ - int ilim_en; - - /* Only Type-C ports can source VBUS */ - if (is_typec_port(port)) { - /* Enable SRC ILIM if rp is MAX single source current */ - ilim_en = (rp == TYPEC_RP_3A0 && - board_vbus_source_enabled(port)); - - gpio_set_level(tcpc_gpios[port].src_ilim.pin, - tcpc_gpios[port].src_ilim.pin_pol ? - ilim_en : !ilim_en); - } -} - -void board_charging_enable(int port, int enable) -{ - gpio_set_level(tcpc_gpios[port].snk.pin, - tcpc_gpios[port].snk.pin_pol ? enable : !enable); - -} - -void board_vbus_enable(int port, int enable) -{ - gpio_set_level(tcpc_gpios[port].src.pin, - tcpc_gpios[port].src.pin_pol ? enable : !enable); -} - -int pd_snk_is_vbus_provided(int port) -{ - int vbus_intr; - -#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0 - if (port == DEDICATED_CHARGE_PORT) - return 1; -#endif - - vbus_intr = gpio_get_level(tcpc_gpios[port].vbus.pin); - - return tcpc_gpios[port].vbus.pin_pol ? vbus_intr : !vbus_intr; -} - -void tcpc_alert_event(enum gpio_signal signal) -{ - int i; - - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (tcpc_gpios[i].vbus.pin == signal) { - schedule_deferred_pd_interrupt(i); - break; - } - } -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int i; - - /* Check which port has the ALERT line set */ - for (i = 0; i < CHARGE_PORT_COUNT; i++) { - /* No alerts for embdeded TCPC */ - if (tcpc_config[i].bus_type == EC_BUS_TYPE_EMBEDDED) - continue; - - /* Add TCPC alerts if present */ - } - - return status; -} - -void board_tcpc_init(void) -{ - int i; - - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) - board_reset_pd_mcu(); - - /* Enable TCPCx interrupt */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) - gpio_enable_interrupt(tcpc_gpios[i].vbus.pin); -} -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1); diff --git a/baseboard/intelrvp/chg_usb_pd_mecc_1_0.c b/baseboard/intelrvp/chg_usb_pd_mecc_1_0.c deleted file mode 100644 index 0c091efead..0000000000 --- a/baseboard/intelrvp/chg_usb_pd_mecc_1_0.c +++ /dev/null @@ -1,107 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel-RVP family-specific configuration */ - -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "console.h" -#include "driver/ppc/sn5s330.h" -#include "hooks.h" -#include "tcpm/tcpci.h" -#include "system.h" -#include "usbc_ppc.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -/* Reset PD MCU */ -void board_reset_pd_mcu(void) -{ - /* Add code if TCPC chips need a reset */ -} - -static void baseboard_tcpc_init(void) -{ - int i; - - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) - board_reset_pd_mcu(); - - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - /* Enable PPC interrupts. */ - if (tcpc_aic_gpios[i].ppc_intr_handler) - gpio_enable_interrupt(tcpc_aic_gpios[i].ppc_alert); - - /* Enable TCPC interrupts. */ - if (tcpc_config[i].bus_type != EC_BUS_TYPE_EMBEDDED) - gpio_enable_interrupt(tcpc_aic_gpios[i].tcpc_alert); - } -} -DECLARE_HOOK(HOOK_INIT, baseboard_tcpc_init, HOOK_PRIO_INIT_CHIPSET); - -void tcpc_alert_event(enum gpio_signal signal) -{ - int i; - - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - /* No alerts for embdeded TCPC */ - if (tcpc_config[i].bus_type == EC_BUS_TYPE_EMBEDDED) - continue; - - if (signal == tcpc_aic_gpios[i].tcpc_alert) { - schedule_deferred_pd_interrupt(i); - break; - } - } -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - int i; - - /* Check which port has the ALERT line set */ - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - /* No alerts for embdeded TCPC */ - if (tcpc_config[i].bus_type == EC_BUS_TYPE_EMBEDDED) - continue; - - if (!gpio_get_level(tcpc_aic_gpios[i].tcpc_alert)) - status |= PD_STATUS_TCPC_ALERT_0 << i; - } - - return status; -} - -int ppc_get_alert_status(int port) -{ - if (!tcpc_aic_gpios[port].ppc_intr_handler) - return 0; - - return !gpio_get_level(tcpc_aic_gpios[port].ppc_alert); -} - -/* PPC support routines */ -void ppc_interrupt(enum gpio_signal signal) -{ - int i; - - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) { - if (tcpc_aic_gpios[i].ppc_intr_handler && - signal == tcpc_aic_gpios[i].ppc_alert) { - tcpc_aic_gpios[i].ppc_intr_handler(i); - break; - } - } -} - -void board_charging_enable(int port, int enable) -{ - if (ppc_vbus_sink_enable(port, enable)) - CPRINTS("C%d: sink path %s failed", - port, enable ? "en" : "dis"); -} diff --git a/baseboard/intelrvp/ite_ec.c b/baseboard/intelrvp/ite_ec.c deleted file mode 100644 index bafddc5f9e..0000000000 --- a/baseboard/intelrvp/ite_ec.c +++ /dev/null @@ -1,153 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP ITE EC specific configuration */ - -#include "adc_chip.h" -#include "common.h" -#include "it83xx_pd.h" -#include "keyboard_scan.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "timer.h" -#include "usb_pd_tcpm.h" - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - .output_settle_us = 35, - .debounce_down_us = 5 * MSEC, - .debounce_up_us = 40 * MSEC, - .scan_period_us = 3 * MSEC, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -/* ADC channels */ -const struct adc_t adc_channels[] = { - [ADC_TEMP_SNS_AMBIENT] = { - .name = "ADC_TEMP_SNS_AMBIENT", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_AMBIENT_CHANNEL, - }, - [ADC_TEMP_SNS_DDR] = { - .name = "ADC_TEMP_SNS_DDR", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_DDR_CHANNEL, - }, - [ADC_TEMP_SNS_SKIN] = { - .name = "ADC_TEMP_SNS_SKIN", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_SKIN_CHANNEL, - }, - [ADC_TEMP_SNS_VR] = { - .name = "ADC_TEMP_SNS_VR", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_VR_CHANNEL, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* - * PWM HW channelx binding tachometer channelx for fan control. - * Four tachometer input pins but two tachometer modules only, - * so always binding [TACH_CH_TACH0A | TACH_CH_TACH0B] and/or - * [TACH_CH_TACH1A | TACH_CH_TACH1B] - */ -const struct fan_tach_t fan_tach[] = { - [PWM_HW_CH_DCR0] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR1] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR2] = { - .ch_tach = TACH_CH_TACH1A, - .fan_p = 2, - .rpm_re = 1, - .s_duty = 1, - }, - [PWM_HW_CH_DCR3] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR4] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR5] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR6] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR7] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(fan_tach) == PWM_HW_CH_TOTAL); - -/* PWM channels */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_FAN] = { - .channel = PWM_HW_CH_DCR2, - .flags = PWM_CONFIG_HAS_RPM_MODE, - .freq_hz = 30000, - .pcfsr_sel = PWM_PRESCALER_C7, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -#if defined(CONFIG_USBC_VCONN) && defined(CONFIG_USB_PD_TCPM_ITE_ON_CHIP) -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ -#ifndef CONFIG_USBC_PPC_VCONN - /* - * Setting VCONN low by disabling the power switch before - * enabling the VCONN on respective CC line - */ - gpio_set_level(tcpc_gpios[port].vconn.cc1_pin, - !tcpc_gpios[port].vconn.pin_pol); - gpio_set_level(tcpc_gpios[port].vconn.cc2_pin, - !tcpc_gpios[port].vconn.pin_pol); - - if (enabled) - gpio_set_level((cc_pin != USBPD_CC_PIN_1) ? - tcpc_gpios[port].vconn.cc2_pin : - tcpc_gpios[port].vconn.cc1_pin, - tcpc_gpios[port].vconn.pin_pol); -#endif -} -#endif diff --git a/baseboard/intelrvp/ite_ec.h b/baseboard/intelrvp/ite_ec.h deleted file mode 100644 index c773a48b21..0000000000 --- a/baseboard/intelrvp/ite_ec.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP ITE EC specific configuration */ - -#ifndef __CROS_EC_ITE_EC_H -#define __CROS_EC_ITE_EC_H - -/* Optional feature - used by ITE */ -#define CONFIG_IT83XX_FLASH_CLOCK_48MHZ -#define CONFIG_IT83XX_VCC_1P8V - -/* ADC channels */ -#define ADC_TEMP_SNS_AMBIENT_CHANNEL CHIP_ADC_CH13 -#define ADC_TEMP_SNS_DDR_CHANNEL CHIP_ADC_CH15 -#define ADC_TEMP_SNS_SKIN_CHANNEL CHIP_ADC_CH6 -#define ADC_TEMP_SNS_VR_CHANNEL CHIP_ADC_CH1 - -#ifdef CONFIG_USBC_VCONN - #define CONFIG_USBC_VCONN_SWAP - /* delay to turn on/off vconn */ -#endif -#endif /* __CROS_EC_ITE_EC_H */ diff --git a/baseboard/intelrvp/led.c b/baseboard/intelrvp/led.c deleted file mode 100644 index 47dad8994f..0000000000 --- a/baseboard/intelrvp/led.c +++ /dev/null @@ -1,106 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control for Phaser - */ - -#include "chipset.h" -#include "ec_commands.h" -#include "gpio.h" -#include "led_common.h" -#include "led_states.h" - -#define LED_ON_LVL 0 -#define LED_OFF_LVL 1 - -const int led_charge_lvl_1 = 5; - -const int led_charge_lvl_2 = 97; - -struct led_descriptor led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES] = { - [STATE_CHARGING_LVL_1] = {{EC_LED_COLOR_RED, LED_INDEFINITE} }, - [STATE_CHARGING_LVL_2] = {{EC_LED_COLOR_AMBER, LED_INDEFINITE} }, - [STATE_CHARGING_FULL_CHARGE] = {{EC_LED_COLOR_GREEN, LED_INDEFINITE} }, - [STATE_DISCHARGE_S0] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S3] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_DISCHARGE_S5] = {{LED_OFF, LED_INDEFINITE} }, - [STATE_BATTERY_ERROR] = {{EC_LED_COLOR_RED, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [STATE_FACTORY_TEST] = {{EC_LED_COLOR_RED, 2 * LED_ONE_SEC}, - {EC_LED_COLOR_GREEN, 2 * LED_ONE_SEC} }, -}; - -const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES] = { - [PWR_LED_STATE_ON] = {{EC_LED_COLOR_WHITE, LED_INDEFINITE} }, - [PWR_LED_STATE_SUSPEND_AC] = {{EC_LED_COLOR_WHITE, 1 * LED_ONE_SEC}, - {LED_OFF, 1 * LED_ONE_SEC} }, - [PWR_LED_STATE_OFF] = {{LED_OFF, LED_INDEFINITE} }, -}; - -const enum ec_led_id supported_led_ids[] = { - EC_LED_ID_POWER_LED, - EC_LED_ID_BATTERY_LED -}; - -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -void led_set_color_power(enum ec_led_colors color) -{ - if (color == EC_LED_COLOR_WHITE) - gpio_set_level(GPIO_PWR_LED_WHITE_L, LED_ON_LVL); - else - /* LED_OFF and unsupported colors */ - gpio_set_level(GPIO_PWR_LED_WHITE_L, LED_OFF_LVL); -} - -void led_set_color_battery(enum ec_led_colors color) -{ - switch (color) { - case EC_LED_COLOR_RED: - gpio_set_level(GPIO_BAT_LED_RED_L, LED_ON_LVL); - break; - case EC_LED_COLOR_AMBER: - gpio_set_level(GPIO_BAT_LED_RED_L, LED_ON_LVL); - break; - case EC_LED_COLOR_GREEN: - gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL); - break; - default: /* LED_OFF and other unsupported colors */ - gpio_set_level(GPIO_BAT_LED_RED_L, LED_OFF_LVL); - break; - } -} - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - brightness_range[EC_LED_COLOR_RED] = 1; - brightness_range[EC_LED_COLOR_AMBER] = 1; - brightness_range[EC_LED_COLOR_GREEN] = 1; - } else if (led_id == EC_LED_ID_POWER_LED) { - brightness_range[EC_LED_COLOR_WHITE] = 1; - } -} - -int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) -{ - if (led_id == EC_LED_ID_BATTERY_LED) { - if (brightness[EC_LED_COLOR_RED] != 0) - led_set_color_battery(EC_LED_COLOR_RED); - else if (brightness[EC_LED_COLOR_AMBER] != 0) - led_set_color_battery(EC_LED_COLOR_AMBER); - else if (brightness[EC_LED_COLOR_GREEN] != 0) - led_set_color_battery(EC_LED_COLOR_GREEN); - else - led_set_color_battery(LED_OFF); - } else if (led_id == EC_LED_ID_POWER_LED) { - if (brightness[EC_LED_COLOR_WHITE] != 0) - led_set_color_power(EC_LED_COLOR_WHITE); - else - led_set_color_power(LED_OFF); - } - - return EC_SUCCESS; -} diff --git a/baseboard/intelrvp/led_states.c b/baseboard/intelrvp/led_states.c deleted file mode 100644 index 5f8768bdd9..0000000000 --- a/baseboard/intelrvp/led_states.c +++ /dev/null @@ -1,188 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED state control for octopus boards - */ - -#include "battery.h" -#include "charge_state.h" -#include "chipset.h" -#include "console.h" -#include "ec_commands.h" -#include "extpower.h" -#include "hooks.h" -#include "led_common.h" -#include "led_states.h" - -#define CPRINTS(format, args...) cprints(CC_GPIO, format, ## args) - -static enum led_states led_get_state(void) -{ - int charge_lvl; - enum led_states new_state = LED_NUM_STATES; - - switch (charge_get_state()) { - case PWR_STATE_CHARGE: - /* Get percent charge */ - charge_lvl = charge_get_percent(); - /* Determine which charge state to use */ - if (charge_lvl < led_charge_lvl_1) - new_state = STATE_CHARGING_LVL_1; - else if (charge_lvl < led_charge_lvl_2) - new_state = STATE_CHARGING_LVL_2; - else - new_state = STATE_CHARGING_FULL_CHARGE; - break; - case PWR_STATE_DISCHARGE_FULL: - if (extpower_is_present()) { - new_state = STATE_CHARGING_FULL_CHARGE; - break; - } - /* Intentional fall-through */ - case PWR_STATE_DISCHARGE /* and PWR_STATE_DISCHARGE_FULL */: - if (chipset_in_state(CHIPSET_STATE_ON)) - new_state = STATE_DISCHARGE_S0; - else if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND)) - new_state = STATE_DISCHARGE_S3; - else - new_state = STATE_DISCHARGE_S5; - break; - case PWR_STATE_ERROR: - new_state = STATE_BATTERY_ERROR; - break; - case PWR_STATE_CHARGE_NEAR_FULL: - new_state = STATE_CHARGING_FULL_CHARGE; - break; - case PWR_STATE_IDLE: /* External power connected in IDLE */ - if (charge_get_flags() & CHARGE_FLAG_FORCE_IDLE) - new_state = STATE_FACTORY_TEST; - else - new_state = STATE_DISCHARGE_S0; - break; - default: - /* Other states don't alter LED behavior */ - break; - } - - return new_state; -} - -static void led_update_battery(void) -{ - static uint8_t ticks, period; - static int led_state = LED_NUM_STATES; - int phase; - enum led_states desired_state = led_get_state(); - - /* - * We always need to check the current state since the value could - * have been manually overwritten. If we're in a new valid state, - * update our ticks and period info. If our new state isn't defined, - * continue using the previous one. - */ - if (desired_state != led_state && desired_state < LED_NUM_STATES) { - /* State is changing */ - led_state = desired_state; - /* Reset ticks and period when state changes */ - ticks = 0; - - period = led_bat_state_table[led_state][LED_PHASE_0].time + - led_bat_state_table[led_state][LED_PHASE_1].time; - - } - - /* If this state is undefined, turn the LED off */ - if (period == 0) { - CPRINTS("Undefined LED behavior for battery state %d," - "turning off LED", led_state); - led_set_color_battery(LED_OFF); - return; - } - - /* - * Determine which phase of the state table to use. The phase is - * determined if it falls within first phase time duration. - */ - phase = ticks < led_bat_state_table[led_state][LED_PHASE_0].time ? - 0 : 1; - ticks = (ticks + 1) % period; - - /* Set the color for the given state and phase */ - led_set_color_battery(led_bat_state_table[led_state][phase].color); -} - -static enum pwr_led_states pwr_led_get_state(void) -{ - if (extpower_is_present()) { - if (charge_get_state() == PWR_STATE_CHARGE_NEAR_FULL) - return PWR_LED_STATE_OFF; - else - return PWR_LED_STATE_ON; - } else - return PWR_LED_STATE_SUSPEND_AC; -} - -static void led_update_power(void) -{ - static uint8_t ticks, period; - static enum pwr_led_states led_state = PWR_LED_NUM_STATES; - int phase; - enum pwr_led_states desired_state = pwr_led_get_state(); - - /* - * If we're in a new valid state, update our ticks and period info. - * Otherwise, continue to use old state - */ - if (desired_state != led_state && desired_state < PWR_LED_NUM_STATES) { - /* State is changing */ - led_state = desired_state; - /* Reset ticks and period when state changes */ - ticks = 0; - - period = led_pwr_state_table[led_state][LED_PHASE_0].time + - led_pwr_state_table[led_state][LED_PHASE_1].time; - - } - - /* If this state is undefined, turn the LED off */ - if (period == 0) { - CPRINTS("Undefined LED behavior for power state %d," - "turning off LED", led_state); - led_set_color_power(LED_OFF); - return; - } - - /* - * Determine which phase of the state table to use. The phase is - * determined if it falls within first phase time duration. - */ - phase = ticks < led_pwr_state_table[led_state][LED_PHASE_0].time ? - 0 : 1; - ticks = (ticks + 1) % period; - - /* Set the color for the given state and phase */ - led_set_color_power(led_pwr_state_table[led_state][phase].color); -} - -static void led_init(void) -{ - /* If battery LED is enabled, set it to "off" to start with */ - if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) - led_set_color_battery(LED_OFF); -} -DECLARE_HOOK(HOOK_INIT, led_init, HOOK_PRIO_DEFAULT); - -/* Called by hook task every hook tick (200 msec) */ -static void led_update(void) -{ - /* - * If battery LED is enabled, set its state based on our power and - * charge - */ - if (led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) - led_update_battery(); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - led_update_power(); -} -DECLARE_HOOK(HOOK_TICK, led_update, HOOK_PRIO_DEFAULT); diff --git a/baseboard/intelrvp/led_states.h b/baseboard/intelrvp/led_states.h deleted file mode 100644 index 907ff5c8b8..0000000000 --- a/baseboard/intelrvp/led_states.h +++ /dev/null @@ -1,90 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Common functions for stateful LEDs (charger and power) - */ - -#ifndef __CROS_EC_BASEBOARD_LED_H -#define __CROS_EC_BASEBOARD_LED_H - -#include "ec_commands.h" - -#define LED_INDEFINITE UINT8_MAX -#define LED_ONE_SEC (1000 / HOOK_TICK_INTERVAL_MS) -#define LED_OFF EC_LED_COLOR_COUNT - -/* - * All LED states should have one phase defined, - * and an additional phase can be defined for blinking - */ -enum led_phase { - LED_PHASE_0, - LED_PHASE_1, - LED_NUM_PHASES -}; - -/* - * STATE_CHARGING_LVL_1 is when 0 <= charge_percentage < led_charge_level_1 - * - * STATE_CHARGING_LVL_2 is when led_charge_level_1 <= - * charge_percentage < led_charge_level_2 - * - * STATE_CHARGING_FULL_CHARGE is when led_charge_level_2 <= - * charge_percentage < 100 - */ -enum led_states { - STATE_CHARGING_LVL_1, - STATE_CHARGING_LVL_2, - STATE_CHARGING_FULL_CHARGE, - STATE_DISCHARGE_S0, - STATE_DISCHARGE_S0_BAT_LOW, - STATE_DISCHARGE_S3, - STATE_DISCHARGE_S5, - STATE_BATTERY_ERROR, - STATE_FACTORY_TEST, - LED_NUM_STATES -}; - -struct led_descriptor { - enum ec_led_colors color; - uint8_t time; -}; - - -/* Charging LED state table - defined in board's led.c */ -extern struct led_descriptor - led_bat_state_table[LED_NUM_STATES][LED_NUM_PHASES]; - -/* Charging LED state level 1 - defined in board's led.c */ -extern const int led_charge_lvl_1; - -/* Charging LED state level 2 - defined in board's led.c */ -extern const int led_charge_lvl_2; - -enum pwr_led_states { - PWR_LED_STATE_ON, - PWR_LED_STATE_SUSPEND_AC, - PWR_LED_STATE_SUSPEND_NO_AC, - PWR_LED_STATE_OFF, - PWR_LED_NUM_STATES -}; - -/* Power LED state table - defined in board's led.c */ -extern const struct led_descriptor - led_pwr_state_table[PWR_LED_NUM_STATES][LED_NUM_PHASES]; - -/** - * Set battery LED color - defined in board's led.c - * - * @param color Color to set on battery LED - * - */ -void led_set_color_battery(enum ec_led_colors color); - -/** - * Set power LED color - defined in board's led.c - */ -void led_set_color_power(enum ec_led_colors color); - -#endif /* __CROS_EC_BASEBOARD_LED_H */ diff --git a/baseboard/intelrvp/mchp_ec.c b/baseboard/intelrvp/mchp_ec.c deleted file mode 100644 index f1eb4678c1..0000000000 --- a/baseboard/intelrvp/mchp_ec.c +++ /dev/null @@ -1,88 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP MCHP EC specific configuration */ - -#include "adc_chip.h" -#include "common.h" -#include "keyboard_scan.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "timer.h" -#include "usb_pd_tcpm.h" - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* - * F3 key scan cycle completed but scan input is not - * charging to logic high when EC start scan next - * column for "T" key, so we set .output_settle_us - * to 80 us from 50 us. - */ - .output_settle_us = 80, - .debounce_down_us = 9 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 3 * MSEC, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -/* ADC channels */ -const struct adc_t adc_channels[] = { - [ADC_TEMP_SNS_AMBIENT] = { - .name = "ADC_TEMP_SNS_AMBIENT", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_AMBIENT_CHANNEL, - }, - [ADC_TEMP_SNS_DDR] = { - .name = "ADC_TEMP_SNS_DDR", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_DDR_CHANNEL, - }, - [ADC_TEMP_SNS_SKIN] = { - .name = "ADC_TEMP_SNS_SKIN", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_SKIN_CHANNEL, - }, - [ADC_TEMP_SNS_VR] = { - .name = "ADC_TEMP_SNS_VR", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .channel = ADC_TEMP_SNS_VR_CHANNEL, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* - * TODO - Fan and tach table. - * MCHP MEC1322 and MEC170x have fan speed controller(s) - * whereas MEC152x only has multiple TACH and PWM modules. - * MEC152x fan control will require a firmware layer that uses - * specified TACH and PWM modules. - */ - -/* PWM channels */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_FAN] = { -#ifdef CHIP_FAMILY_MEC172X - .channel = PWM_HW_CH_0, -#else - .channel = PWM_HW_CH_4, -#endif - .flags = PWM_CONFIG_HAS_RPM_MODE, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); diff --git a/baseboard/intelrvp/mchp_ec.h b/baseboard/intelrvp/mchp_ec.h deleted file mode 100644 index 227ccaef6d..0000000000 --- a/baseboard/intelrvp/mchp_ec.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP MCHP EC specific configuration */ - -#ifndef __CROS_EC_MCHP_EC_H -#define __CROS_EC_MCHP_EC_H - -/* ADC channels */ -#define ADC_TEMP_SNS_AMBIENT_CHANNEL CHIP_ADC_CH7 -#define ADC_TEMP_SNS_DDR_CHANNEL CHIP_ADC_CH4 -#define ADC_TEMP_SNS_SKIN_CHANNEL CHIP_ADC_CH3 -#define ADC_TEMP_SNS_VR_CHANNEL CHIP_ADC_CH1 - -/* - * ADC maximum voltage is a board level configuration. - * MEC152x ADC can use an external 3.0 or 3.3V reference with - * maximum values up to the reference voltage. - * The ADC maximum voltage depends upon the external reference - * voltage connected to MEC152x. - */ -#define ADC_MAX_MVOLT 3000 - -#endif /* __CROS_EC_MCHP_EC_H */ diff --git a/baseboard/intelrvp/npcx_ec.c b/baseboard/intelrvp/npcx_ec.c deleted file mode 100644 index d6eca2e55b..0000000000 --- a/baseboard/intelrvp/npcx_ec.c +++ /dev/null @@ -1,78 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP NPCX EC specific configuration */ - -#include "adc_chip.h" -#include "fan_chip.h" -#include "keyboard_scan.h" -#include "pwm_chip.h" -#include "time.h" - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - .output_settle_us = 35, - .debounce_down_us = 5 * MSEC, - .debounce_up_us = 40 * MSEC, - .scan_period_us = 3 * MSEC, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -/* ADC channels */ -const struct adc_t adc_channels[] = { - [ADC_TEMP_SNS_AMBIENT] = { - .name = "ADC_TEMP_SNS_AMBIENT", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .input_ch = ADC_TEMP_SNS_AMBIENT_CHANNEL, - }, - [ADC_TEMP_SNS_DDR] = { - .name = "ADC_TEMP_SNS_DDR", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .input_ch = ADC_TEMP_SNS_DDR_CHANNEL, - }, - [ADC_TEMP_SNS_SKIN] = { - .name = "ADC_TEMP_SNS_SKIN", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .input_ch = ADC_TEMP_SNS_SKIN_CHANNEL, - }, - [ADC_TEMP_SNS_VR] = { - .name = "ADC_TEMP_SNS_VR", - .factor_mul = ADC_MAX_MVOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - .input_ch = ADC_TEMP_SNS_VR_CHANNEL, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* PWM configuration */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_FAN] = { - .channel = PWN_FAN_CHANNEL, - .flags = 0, - .freq = 30000, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -const struct mft_t mft_channels[] = { - [MFT_CH_0] = { - .module = NPCX_MFT_MODULE_2, - .clk_src = TCKC_LFCLK, - .pwm_id = PWM_CH_FAN, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); diff --git a/baseboard/intelrvp/npcx_ec.h b/baseboard/intelrvp/npcx_ec.h deleted file mode 100644 index 52bcb2dae6..0000000000 --- a/baseboard/intelrvp/npcx_ec.h +++ /dev/null @@ -1,38 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel BASEBOARD-RVP NPCX EC specific configuration */ - -#ifndef __CROS_EC_NPCX_EC_H -#define __CROS_EC_NPCX_EC_H - -#if !defined(__ASSEMBLER__) - -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -#endif /* __ASSEMBLER__ */ - -/* ADC channels */ -#define ADC_MAX_MVOLT ADC_MAX_VOLT -#define ADC_TEMP_SNS_AMBIENT_CHANNEL NPCX_ADC_CH3 -#define ADC_TEMP_SNS_DDR_CHANNEL NPCX_ADC_CH4 -#define ADC_TEMP_SNS_SKIN_CHANNEL NPCX_ADC_CH2 -#define ADC_TEMP_SNS_VR_CHANNEL NPCX_ADC_CH1 - -/* KSO2 is inverted */ -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV - -/* Fan */ -#define CONFIG_PWM -#define PWN_FAN_CHANNEL 3 - -/* GPIO64/65 are used as UART pins. */ -#define NPCX_UART_MODULE2 1 - -#endif /* __CROS_EC_NPCX_EC_H */ diff --git a/baseboard/intelrvp/usb_pd_policy_mecc_0_9.c b/baseboard/intelrvp/usb_pd_policy_mecc_0_9.c deleted file mode 100644 index 6d173fd032..0000000000 --- a/baseboard/intelrvp/usb_pd_policy_mecc_0_9.c +++ /dev/null @@ -1,57 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charge_manager.h" -#include "console.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_set_power_supply_ready(int port) -{ - /* Disable charging */ - board_charging_enable(port, 0); - - /* Provide VBUS */ - board_vbus_enable(port, 1); - -#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT - /* Ensure we advertise the proper available current quota */ - charge_manager_source_port(port, 1); -#endif - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS */ - board_vbus_enable(port, 0); - -#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT - /* Give back the current quota we are no longer using */ - charge_manager_source_port(port, 0); -#endif - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap if PP5000 rail is enabled */ - return gpio_get_level(GPIO_EN_PP5000); -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - board_set_vbus_source_current_limit(port, rp); -} diff --git a/baseboard/intelrvp/usb_pd_policy_mecc_1_0.c b/baseboard/intelrvp/usb_pd_policy_mecc_1_0.c deleted file mode 100644 index 29a538231f..0000000000 --- a/baseboard/intelrvp/usb_pd_policy_mecc_1_0.c +++ /dev/null @@ -1,72 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charge_manager.h" -#include "console.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = board_vbus_source_enabled(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap if PP3300 rail is enabled */ - return gpio_get_level(GPIO_EN_PP3300_A); -} - -int pd_snk_is_vbus_provided(int port) -{ - return ppc_is_vbus_present(port); -} - -int board_vbus_source_enabled(int port) -{ - if (is_typec_port(port)) - return ppc_is_sourcing_vbus(port); - return 0; -} diff --git a/baseboard/ite_evb/baseboard.c b/baseboard/ite_evb/baseboard.c deleted file mode 100644 index 00459b12bc..0000000000 --- a/baseboard/ite_evb/baseboard.c +++ /dev/null @@ -1,195 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* ite_evb baseboard configuration */ -#include "clock.h" -#include "common.h" -#include "console.h" -#include "fan.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "intc.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "lpc.h" -#include "power_button.h" -#include "pwm_chip.h" -#include "registers.h" -#include "spi.h" -#include "switch.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "uart.h" -#include "util.h" -#include "gpio_list.h" - -#if defined(CONFIG_FANS) || defined(CONFIG_PWM) -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = 0, /* Use MFT id to control fan */ - .pgood_gpio = -1, - .enable_gpio = -1, -}; - -const struct fan_rpm fan_rpm_0 = { - .rpm_min = 1500, - .rpm_start = 1500, - .rpm_max = 6500, -}; - -const struct fan_t fans[] = { - { .conf = &fan_conf_0, - .rpm = &fan_rpm_0, }, -}; -BUILD_ASSERT(ARRAY_SIZE(fans) == CONFIG_FANS); - -/* - * PWM HW channelx binding tachometer channelx for fan control. - * Four tachometer input pins but two tachometer modules only, - * so always binding [TACH_CH_TACH0A | TACH_CH_TACH0B] and/or - * [TACH_CH_TACH1A | TACH_CH_TACH1B] - */ -const struct fan_tach_t fan_tach[] = { - [PWM_HW_CH_DCR0] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR1] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR2] = { - .ch_tach = TACH_CH_TACH1A, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR3] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR4] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR5] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR6] = { - .ch_tach = TACH_CH_NULL, - .fan_p = -1, - .rpm_re = -1, - .s_duty = -1, - }, - [PWM_HW_CH_DCR7] = { - .ch_tach = TACH_CH_TACH0A, - .fan_p = 2, - .rpm_re = 50, - .s_duty = 30, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(fan_tach) == PWM_HW_CH_TOTAL); -#endif /* defined(CONFIG_FANS) || defined(CONFIG_PWM) */ - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - .output_settle_us = 35, - .debounce_down_us = 5 * MSEC, - .debounce_up_us = 40 * MSEC, - .scan_period_us = 3 * MSEC, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -#if defined(CONFIG_SPI_FLASH_PORT) -/* SPI devices */ -const struct spi_device_t spi_devices[] = { - [CONFIG_SPI_FLASH_PORT] = { - .port = CONFIG_SPI_FLASH_PORT, - .div = 0, - .gpio_cs = -1 - }, -}; -const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); -#endif - -/* Initialize board. */ -static void board_init(void) -{ -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -/* Wake-up pins for hibernate */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_POWER_BUTTON_L, GPIO_LID_OPEN -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* - * I2C channels (A, B, and C) are using the same timing registers (00h~07h) - * at default. - * In order to set frequency independently for each channels, - * We use timing registers 09h~0Bh, and the supported frequency will be: - * 50KHz, 100KHz, 400KHz, or 1MHz. - * I2C channels (D, E and F) can be set different frequency on different ports. - * The I2C(D/E/F) frequency depend on the frequency of SMBus Module and - * the individual prescale register. - * The frequency of SMBus module is 24MHz on default. - * The allowed range of I2C(D/E/F) frequency is as following setting. - * SMBus Module Freq = PLL_CLOCK / ((IT83XX_ECPM_SCDCR2 & 0x0F) + 1) - * (SMBus Module Freq / 510) <= I2C Freq <= (SMBus Module Freq / 8) - * Channel D has multi-function and can be used as UART interface. - * Channel F is reserved for EC debug. - */ - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - { - .name = "battery", - .port = I2C_PORT_BATTERY, - .kbps = 100, - .scl = GPIO_I2C_C_SCL, - .sda = GPIO_I2C_C_SDA, - }, - { - .name = "evb-1", - .port = IT83XX_I2C_CH_A, - .kbps = 100, - .scl = GPIO_I2C_A_SCL, - .sda = GPIO_I2C_A_SDA, - }, - { - .name = "evb-2", - .port = IT83XX_I2C_CH_B, - .kbps = 100, - .scl = GPIO_I2C_B_SCL, - .sda = GPIO_I2C_B_SDA, - }, - { - .name = "opt-4", - .port = IT83XX_I2C_CH_E, - .kbps = 100, - .scl = GPIO_I2C_E_SCL, - .sda = GPIO_I2C_E_SDA, - }, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); diff --git a/baseboard/ite_evb/baseboard.h b/baseboard/ite_evb/baseboard.h deleted file mode 100644 index 7fe309491c..0000000000 --- a/baseboard/ite_evb/baseboard.h +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* ite_evb baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* Optional features */ -#define CONFIG_BATTERY_SMART -#define CONFIG_BOARD_VERSION_GPIO -#define CONFIG_FANS 1 -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_IT83XX_ENABLE_MOUSE_DEVICE -#define CONFIG_IT83XX_SMCLK2_ON_GPC7 -#define CONFIG_IT83XX_VCC_3P3V - -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_S0 -#define CONFIG_PECI -#define CONFIG_PECI_COMMON -#define CONFIG_PECI_TJMAX 100 -#define CONFIG_POWER_BUTTON -#define CONFIG_PWM -/* Use CS0 of SSPI */ -#define CONFIG_SPI_CONTROLLER -#define CONFIG_SPI_FLASH_PORT 0 -#define CONFIG_UART_HOST -#define CONFIG_HOSTCMD_LPC - -/* Optional console commands */ -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SCRATCHPAD -#define CONFIG_CMD_STACKOVERFLOW - -/* Debug */ -#undef CONFIG_CMD_FORCETIME -#undef CONFIG_HOOK_DEBUG -#undef CONFIG_KEYBOARD_DEBUG -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* I2C Bus Configuration */ -#define I2C_PORT_CHARGER IT83XX_I2C_CH_C -#define I2C_PORT_BATTERY IT83XX_I2C_CH_C - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/ite_evb/build.mk b/baseboard/ite_evb/build.mk deleted file mode 100644 index 77352145ee..0000000000 --- a/baseboard/ite_evb/build.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o diff --git a/baseboard/ite_evb/usb_pd_policy.c b/baseboard/ite_evb/usb_pd_policy.c deleted file mode 100644 index 59f3da13f5..0000000000 --- a/baseboard/ite_evb/usb_pd_policy.c +++ /dev/null @@ -1,140 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for ite_evb baseboard */ - -#include "adc.h" -#include "config.h" -#include "common.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "it83xx_pd.h" -#include "registers.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "util.h" -#include "usb_mux.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -/* ---------------- Power Data Objects (PDOs) ----------------- */ -#ifdef CONFIG_USB_PD_CUSTOM_PDO -#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\ - PDO_FIXED_UNCONSTRAINED | PDO_FIXED_COMM_CAP) - -/* Threshold voltage of VBUS provided (mV) */ -#define PD_VBUS_PROVIDED_THRESHOLD 3900 - -const uint32_t pd_src_pdo[] = { - PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), -}; -const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo); - -const uint32_t pd_snk_pdo[] = { - PDO_FIXED(5000, 500, PDO_FIXED_FLAGS), - PDO_BATT(4500, 14000, 10000), - PDO_VAR(4500, 14000, 3000), -}; -const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo); -#endif - -int pd_is_max_request_allowed(void) -{ - /* Max voltage request allowed */ - return 1; -} - -int pd_snk_is_vbus_provided(int port) -{ - int mv = ADC_READ_ERROR; - - switch (port) { - case USBPD_PORT_A: - mv = adc_read_channel(ADC_VBUSSA); - break; - case USBPD_PORT_B: - mv = adc_read_channel(ADC_VBUSSB); - break; - case USBPD_PORT_C: - mv = adc_read_channel(ADC_VBUSSC); - break; - } - - return mv > PD_VBUS_PROVIDED_THRESHOLD; -} - -int pd_set_power_supply_ready(int port) -{ - /* Provide VBUS */ - board_pd_vbus_ctrl(port, 1); - /* Vbus provided or not */ - return !pd_snk_is_vbus_provided(port); -} - -void pd_power_supply_reset(int port) -{ - /* Kill VBUS */ - board_pd_vbus_ctrl(port, 0); -} - - -__override int pd_check_data_swap(int port, enum pd_data_role data_role) -{ - /* Always allow data swap: we can be DFP or UFP for USB */ - return 1; -} - -int pd_check_vconn_swap(int port) -{ - /* - * VCONN is provided directly by the battery(PPVAR_SYS) - * but use the same rules as power swap - */ - return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0; -} - -/* ----------------- Vendor Defined Messages ------------------ */ -/* - * We don't have mux on pd evb and not define CONFIG_USBC_SS_MUX, - * so mux related functions do nothing then return. - */ -__override int svdm_enter_dp_mode(int port, uint32_t mode_caps) -{ - /* - * Do not enter dp mode, we let VDM enumeration stop after discover - * modes have done. - */ - return -1; -} - -__override void svdm_dp_post_config(int port) -{ -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - /* Ack */ - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ -} - -__override int pd_custom_vdm(int port, int cnt, uint32_t *payload, - uint32_t **rpayload) -{ - /* Return length 0, means nothing needn't tx */ - return 0; -} - -__override int svdm_dp_config(int port, uint32_t *payload) -{ - /* Return length 0, means nothing needn't tx */ - return 0; -}; diff --git a/baseboard/kalista/baseboard.c b/baseboard/kalista/baseboard.c deleted file mode 100644 index f6a6b23110..0000000000 --- a/baseboard/kalista/baseboard.c +++ /dev/null @@ -1,516 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Kalista baseboard configuration */ - -#include "adc.h" -#include "baseboard.h" -#include "battery.h" -#include "bd99992gw.h" -#include "board_config.h" -#include "button.h" -#include "chipset.h" -#include "console.h" -#include "cros_board_info.h" -#include "driver/pmic_tps650x30.h" -#include "driver/temp_sensor/tmp432.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "espi.h" -#include "extpower.h" -#include "espi.h" -#include "fan.h" -#include "fan_chip.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "i2c.h" -#include "math_util.h" -#include "oz554.h" -#include "pi3usb9281.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "spi.h" -#include "switch.h" -#include "system.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" -#include "usb_charge.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -static uint8_t board_version; -static uint32_t oem; -static uint32_t sku; - -enum bj_adapter { - BJ_90W_19V, - BJ_135W_19V, -}; - -/* - * Bit masks to map SKU ID to BJ adapter wattage. 1:135W 0:90W - * KBL-R i7 8550U 4 135 - * KBL-R i5 8250U 5 135 - * KBL-R i3 8130U 6 135 - * KBL-U i7 7600 3 135 - * KBL-U i5 7500 2 135 - * KBL-U i3 7100 1 90 - * KBL-U Celeron 3965 7 90 - * KBL-U Celeron 3865 0 90 - */ -#define BJ_ADAPTER_135W_MASK (1 << 4 | 1 << 5 | 1 << 6 | 1 << 3 | 1 << 2) - -static void tcpc_alert_event(enum gpio_signal signal) -{ - if (!gpio_get_level(GPIO_USB_C0_PD_RST_ODL)) - return; -#ifdef HAS_TASK_PDCMD - /* Exchange status with TCPCs */ - host_command_pd_send_status(PD_CHARGE_NO_CHANGE); -#endif -} - -void vbus0_evt(enum gpio_signal signal) -{ - task_wake(TASK_ID_PD_C0); -} - -#include "gpio_list.h" - -/* Hibernate wake configuration */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_POWER_BUTTON_L, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* ADC channels */ -const struct adc_t adc_channels[] = { - /* Vbus sensing (1/10 voltage divider). */ - [ADC_VBUS] = {"VBUS", NPCX_ADC_CH2, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0}, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/* TODO: Verify fan control and mft */ -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ - .pgood_gpio = -1, - .enable_gpio = GPIO_FAN_PWR_EN, -}; - -const struct fan_rpm fan_rpm_0 = { - .rpm_min = 2180, - .rpm_start = 2180, - .rpm_max = 4900, -}; - -const struct fan_t fans[] = { - [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, }, -}; -BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); - -const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_2, TCKC_LFCLK, PWM_CH_FAN}, -}; -BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); - -const struct i2c_port_t i2c_ports[] = { - {"tcpc", I2C_PORT_TCPC0, 400, GPIO_I2C0_0_SCL, GPIO_I2C0_0_SDA}, - {"eeprom", I2C_PORT_EEPROM, 400, GPIO_I2C0_1_SCL, GPIO_I2C0_1_SDA}, - {"backlight", I2C_PORT_BACKLIGHT, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"pmic", I2C_PORT_PMIC, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"thermal", I2C_PORT_THERMAL, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/* TCPC mux configuration */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - /* Alert is active-low, push-pull */ - { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = I2C_ADDR_TCPC0_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - }, -}; - -static int ps8751_tune_mux(const struct usb_mux *me) -{ - /* 0x98 sets lower EQ of DP port (4.5db) */ - mux_write(me, PS8XXX_REG_MUX_DP_EQ_CONFIGURATION, 0x98); - return EC_SUCCESS; -} - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .usb_port = 0, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .board_init = &ps8751_tune_mux, - }, -}; - -const int usb_port_enable[USB_PORT_COUNT] = { - GPIO_USB1_ENABLE, - GPIO_USB2_ENABLE, - GPIO_USB3_ENABLE, - GPIO_USB4_ENABLE, -}; - -void board_reset_pd_mcu(void) -{ - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 0); - msleep(1); - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 1); -} - -void board_tcpc_init(void) -{ - int reg; - - /* This needs to be executed only once per boot. It could be run by RO - * if we boot in recovery mode. It could be run by RW if we boot in - * normal or dev mode. Note EFS makes RO jump to RW before HOOK_INIT. */ - board_reset_pd_mcu(); - - /* - * Wake up PS8751. If PS8751 remains in low power mode after sysjump, - * TCPM_INIT will fail due to not able to access PS8751. - * Note PS8751 A3 will wake on any I2C access. - */ - i2c_read8(I2C_PORT_TCPC0, I2C_ADDR_TCPC0_FLAGS, 0xA0, ®); - - /* Enable TCPC interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - - /* - * Initialize HPD to low; after sysjump SOC needs to see - * HPD pulse to enable video path - */ - for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1); - -uint16_t tcpc_get_alert_status(void) -{ - if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL) && - gpio_get_level(GPIO_USB_C0_PD_RST_ODL)) - return PD_STATUS_TCPC_ALERT_0; - return 0; -} - -/* - * TMP431 has one local and one remote sensor. - * - * Temperature sensors data; must be in same order as enum temp_sensor_id. - * Sensor index and name must match those present in coreboot: - * src/mainboard/google/${board}/acpi/dptf.asl - */ -const struct temp_sensor_t temp_sensors[] = { - {"TMP431_Internal", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, - TMP432_IDX_LOCAL}, - {"TMP431_Sensor_1", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, - TMP432_IDX_REMOTE1}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -/* - * Thermal limits for each temp sensor. All temps are in degrees K. Must be in - * same order as enum temp_sensor_id. To always ignore any temp, use 0. - */ -struct ec_thermal_config thermal_params[] = { - /* {Twarn, Thigh, Thalt}, <on> - * {Twarn, Thigh, X }, <off> - * fan_off, fan_max - */ - {{0, C_TO_K(80), C_TO_K(81)}, {0, C_TO_K(78), 0}, - C_TO_K(4), C_TO_K(76)}, /* TMP431_Internal */ - {{0, 0, 0}, {0, 0, 0}, 0, 0}, /* TMP431_Sensor_1 */ -}; -BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); - -/* Initialize PMIC */ -#define I2C_PMIC_READ(reg, data) \ - i2c_read8(I2C_PORT_PMIC, TPS650X30_I2C_ADDR1_FLAGS, (reg), (data)) - -#define I2C_PMIC_WRITE(reg, data) \ - i2c_write8(I2C_PORT_PMIC, TPS650X30_I2C_ADDR1_FLAGS, (reg), (data)) - -static void board_pmic_init(void) -{ - int err; - int error_count = 0; - static uint8_t pmic_initialized = 0; - - if (pmic_initialized) - return; - - /* Read vendor ID */ - while (1) { - int data; - err = I2C_PMIC_READ(TPS650X30_REG_VENDORID, &data); - if (!err && data == TPS650X30_VENDOR_ID) - break; - else if (error_count > 5) - goto pmic_error; - error_count++; - } - - /* - * VCCIOCNT register setting - * [6] : CSDECAYEN - * otherbits: default - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_VCCIOCNT, 0x4A); - if (err) - goto pmic_error; - - /* - * VRMODECTRL: - * [4] : VCCIOLPM clear - * otherbits: default - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_VRMODECTRL, 0x2F); - if (err) - goto pmic_error; - - /* - * PGMASK1 : Exclude VCCIO from Power Good Tree - * [7] : MVCCIOPG clear - * otherbits: default - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_PGMASK1, 0x80); - if (err) - goto pmic_error; - - /* - * PWFAULT_MASK1 Register settings - * [7] : 1b V4 Power Fault Masked - * [4] : 1b V7 Power Fault Masked - * [2] : 1b V9 Power Fault Masked - * [0] : 1b V13 Power Fault Masked - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_PWFAULT_MASK1, 0x95); - if (err) - goto pmic_error; - - /* - * Discharge control 4 register configuration - * [7:6] : 00b Reserved - * [5:4] : 01b V3.3S discharge resistance (V6S), 100 Ohm - * [3:2] : 01b V18S discharge resistance (V8S), 100 Ohm - * [1:0] : 01b V100S discharge resistance (V11S), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT4, 0x15); - if (err) - goto pmic_error; - - /* - * Discharge control 3 register configuration - * [7:6] : 01b V1.8U_2.5U discharge resistance (V9), 100 Ohm - * [5:4] : 01b V1.2U discharge resistance (V10), 100 Ohm - * [3:2] : 01b V100A discharge resistance (V11), 100 Ohm - * [1:0] : 01b V085A discharge resistance (V12), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT3, 0x55); - if (err) - goto pmic_error; - - /* - * Discharge control 2 register configuration - * [7:6] : 01b V5ADS3 discharge resistance (V5), 100 Ohm - * [5:4] : 01b V33A_DSW discharge resistance (V6), 100 Ohm - * [3:2] : 01b V33PCH discharge resistance (V7), 100 Ohm - * [1:0] : 01b V18A discharge resistance (V8), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT2, 0x55); - if (err) - goto pmic_error; - - /* - * Discharge control 1 register configuration - * [7:2] : 00b Reserved - * [1:0] : 01b VCCIO discharge resistance (V4), 100 Ohm - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_DISCHCNT1, 0x01); - if (err) - goto pmic_error; - - /* - * Increase Voltage - * [7:0] : 0x2a default - * [5:4] : 10b default - * [5:4] : 01b 5.1V (0x1a) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_V5ADS3CNT, 0x1a); - if (err) - goto pmic_error; - - /* - * PBCONFIG Register configuration - * [7] : 1b Power button debounce, 0ms (no debounce) - * [6] : 0b Power button reset timer logic, no action (default) - * [5:0] : 011111b Force an Emergency reset time, 31s (default) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_PBCONFIG, 0x9F); - if (err) - goto pmic_error; - - /* - * V3.3A_DSW (VR3) control. Default: 0x2A. - * [7:6] : 00b Disabled - * [5:4] : 00b Vnom + 3%. (default: 10b 0%) - */ - err = I2C_PMIC_WRITE(TPS650X30_REG_V33ADSWCNT, 0x0A); - if (err) - goto pmic_error; - - CPRINTS("PMIC init done"); - pmic_initialized = 1; - return; - -pmic_error: - CPRINTS("PMIC init failed"); -} - -void chipset_pre_init_callback(void) -{ - board_pmic_init(); -} - -/** - * Notify PCH of the AC presence. - */ -static void board_extpower(void) -{ - gpio_set_level(GPIO_PCH_ACPRESENT, extpower_is_present()); -} -DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT); - -int64_t get_time_dsw_pwrok(void) -{ - /* DSW_PWROK is turned on before EC was powered. */ - return -20 * MSEC; -} - -const struct pwm_t pwm_channels[] = { - [PWM_CH_LED_RED] = { 3, PWM_CONFIG_DSLEEP, 100 }, - [PWM_CH_LED_BLUE] = { 5, PWM_CONFIG_DSLEEP, 100 }, - [PWM_CH_FAN] = {4, PWM_CONFIG_OPEN_DRAIN, 25000}, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -struct fan_step { - int on; - int off; - int rpm; -}; - -/* Note: Do not make the fan on/off point equal to 0 or 100 */ -static const struct fan_step fan_table0[] = { - {.on = 0, .off = 5, .rpm = 0}, - {.on = 30, .off = 5, .rpm = 2180}, - {.on = 49, .off = 46, .rpm = 2680}, - {.on = 53, .off = 50, .rpm = 3300}, - {.on = 58, .off = 54, .rpm = 3760}, - {.on = 63, .off = 59, .rpm = 4220}, - {.on = 68, .off = 64, .rpm = 4660}, - {.on = 75, .off = 70, .rpm = 4900}, -}; -/* All fan tables must have the same number of levels */ -#define NUM_FAN_LEVELS ARRAY_SIZE(fan_table0) - -static const struct fan_step *fan_table = fan_table0; - - -static void cbi_init(void) -{ - uint32_t val; - if (cbi_get_board_version(&val) == EC_SUCCESS && val <= UINT8_MAX) - board_version = val; - CPRINTS("Board Version: 0x%02x", board_version); - - if (cbi_get_oem_id(&val) == EC_SUCCESS && val < OEM_COUNT) - oem = val; - CPRINTS("OEM: %d", oem); - - if (cbi_get_sku_id(&val) == EC_SUCCESS) - sku = val; - CPRINTS("SKU: 0x%08x", sku); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); - -static void setup_bj(void) -{ - enum bj_adapter bj = (BJ_ADAPTER_135W_MASK & (1 << sku)) ? - BJ_135W_19V : BJ_90W_19V; - gpio_set_level(GPIO_U22_90W, bj == BJ_90W_19V); -} - -static void board_init(void) -{ - setup_bj(); - - board_extpower(); - - gpio_enable_interrupt(GPIO_USB_C0_VBUS_WAKE_L); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -int fan_percent_to_rpm(int fan, int pct) -{ - static int current_level; - static int previous_pct; - int i; - - /* - * Compare the pct and previous pct, we have the three paths : - * 1. decreasing path. (check the off point) - * 2. increasing path. (check the on point) - * 3. invariant path. (return the current RPM) - */ - if (pct < previous_pct) { - for (i = current_level; i >= 0; i--) { - if (pct <= fan_table[i].off) - current_level = i - 1; - else - break; - } - } else if (pct > previous_pct) { - for (i = current_level + 1; i < NUM_FAN_LEVELS; i++) { - if (pct >= fan_table[i].on) - current_level = i; - else - break; - } - } - - if (current_level < 0) - current_level = 0; - - previous_pct = pct; - - if (fan_table[current_level].rpm != - fan_get_rpm_target(FAN_CH(fan))) - cprints(CC_THERMAL, "Setting fan RPM to %d", - fan_table[current_level].rpm); - - return fan_table[current_level].rpm; -} diff --git a/baseboard/kalista/baseboard.h b/baseboard/kalista/baseboard.h deleted file mode 100644 index 230b815a48..0000000000 --- a/baseboard/kalista/baseboard.h +++ /dev/null @@ -1,238 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Kalista baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#undef CONFIG_SYSTEM_UNLOCKED -#define CONFIG_USB_PD_COMM_LOCKED - -/* EC */ -#define CONFIG_ADC -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_CRC8 -#define CONFIG_CEC -#define CONFIG_CBI_EEPROM -#define CONFIG_DEDICATED_RECOVERY_BUTTON -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_LED_COMMON -#define CONFIG_MKBP_INPUT_DEVICES -#define CONFIG_MKBP_USE_HOST_EVENT -#define CONFIG_DPTF -#define CONFIG_FLASH_SIZE_BYTES 0x80000 -#define CONFIG_FPU -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#undef CONFIG_LID_SWITCH -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_PWM -#define CONFIG_LTO -#define CONFIG_CHIP_PANIC_BACKUP -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25X40 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND \ - (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) -#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L -#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN -#define WIRELESS_GPIO_WWAN GPIO_PP3300_DX_LTE -#define CEC_GPIO_OUT GPIO_CEC_OUT -#define CEC_GPIO_IN GPIO_CEC_IN -#define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP -#define CONFIG_FANS 1 -#define CONFIG_FAN_RPM_CUSTOM -#define CONFIG_THROTTLE_AP -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_PWM - -/* EC console commands */ -#define CONFIG_CMD_BUTTON - -/* SOC */ -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET -#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_BUTTON_INIT_IDLE -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_DELAY_DSW_PWROK_TO_PWRBTN - -/* Sensor */ -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_TMP432 - -/* USB */ -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_CUSTOM_PDO -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_PS8751 -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN - -/* USB-A config */ -#define CONFIG_USB_PORT_POWER_DUMB -#define USB_PORT_COUNT 4 - -/* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ - -/* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 -#define I2C_PORT_BACKLIGHT NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_THERMAL NPCX_I2C_PORT3 - -/* I2C addresses */ -#define I2C_ADDR_TCPC0_FLAGS 0x0b -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -/* Verify and jump to RW image on boot */ -#define CONFIG_VBOOT_EFS -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -/* - * LED backlight controller - */ -#define CONFIG_LED_DRIVER_OZ554 - -/* - * Flash layout. Since config_flash_layout.h is included before board.h, - * we can only overwrite (=undef/define) these parameters here. - * - * Flash stores 3 images: RO, RW_A, RW_B. We divide the flash by 4. - * A public key is stored at the end of RO. Signatures are stored at the - * end of RW_A and RW_B, respectively. - */ -#define CONFIG_RW_B -#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF -#undef CONFIG_RO_SIZE -#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE_BYTES / 4) -#undef CONFIG_RW_SIZE -#define CONFIG_RW_SIZE CONFIG_RO_SIZE -#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF -#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE) -#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) -#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) - -#undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE - -#define CONFIG_RWSIG -#define CONFIG_RWSIG_TYPE_RWSIG -#define CONFIG_RSA -#ifdef SECTION_IS_RO -#define CONFIG_RSA_OPTIMIZED -#endif -#define CONFIG_SHA256 -#ifdef SECTION_IS_RO -#define CONFIG_SHA256_UNROLLED -#endif -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -enum charge_port { - CHARGE_PORT_TYPEC0, - CHARGE_PORT_BARRELJACK, -}; - -enum temp_sensor_id { - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ - TEMP_SENSOR_COUNT -}; - -enum adc_channel { - ADC_VBUS, - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_LED_RED, - PWM_CH_LED_BLUE, - PWM_CH_FAN, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0, - /* Number of FAN channels */ - FAN_CH_COUNT -}; - -enum mft_channel { - MFT_CH_0, - /* Number of MFT channels */ - MFT_CH_COUNT -}; - -enum OEM_ID { - OEM_KARMA = 7, - /* Number of OEM IDs */ - OEM_COUNT -}; - -/* TODO(crosbug.com/p/61098): Verify the numbers below. */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ - -/* Board specific handlers */ -void board_reset_pd_mcu(void); -void board_set_tcpc_power_mode(int port, int mode); -void led_alert(int enable); -void led_critical(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/kalista/build.mk b/baseboard/kalista/build.mk deleted file mode 100644 index e64b6a2d71..0000000000 --- a/baseboard/kalista/build.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -*- makefile -*- -# Copyright 2018 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-y+=led.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o
\ No newline at end of file diff --git a/baseboard/kalista/led.c b/baseboard/kalista/led.c deleted file mode 100644 index e04eecf5e3..0000000000 --- a/baseboard/kalista/led.c +++ /dev/null @@ -1,232 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Power and battery LED control for Kalista - */ - -#include "chipset.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "hooks.h" -#include "led_common.h" -#include "pwm.h" -#include "timer.h" -#include "util.h" - -const enum ec_led_id supported_led_ids[] = {EC_LED_ID_POWER_LED}; -const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); - -enum led_color { - LED_OFF = 0, - LED_RED, - LED_BLUE, - LED_AMBER, - - /* Number of colors, not a color itself */ - LED_COLOR_COUNT -}; - -static int set_color_power(enum led_color color, int duty) -{ - int blue = 0; - int red = 0; - - if (duty < 0 || 100 < duty) - return EC_ERROR_UNKNOWN; - - switch (color) { - case LED_OFF: - break; - case LED_BLUE: - blue = 1; - break; - case LED_RED: - red = 1; - break; - case LED_AMBER: - blue = 1; - red = 1; - break; - default: - return EC_ERROR_UNKNOWN; - } - - if (red) - pwm_set_duty(PWM_CH_LED_RED, duty); - else - pwm_set_duty(PWM_CH_LED_RED, 0); - - if (blue) - pwm_set_duty(PWM_CH_LED_BLUE, duty); - else - pwm_set_duty(PWM_CH_LED_BLUE, 0); - - return EC_SUCCESS; -} - -static int set_color(enum ec_led_id id, enum led_color color, int duty) -{ - switch (id) { - case EC_LED_ID_POWER_LED: - return set_color_power(color, duty); - default: - return EC_ERROR_UNKNOWN; - } -} - -#define LED_PULSE_US (2 * SECOND) -/* 40 msec for nice and smooth transition. */ -#define LED_PULSE_TICK_US (40 * MSEC) - -/* When pulsing is enabled, brightness is incremented by <duty_inc> every - * <interval> usec from 0 to 100% in LED_PULSE_US usec. Then it's decremented - * likewise in LED_PULSE_US usec. */ -static struct { - uint32_t interval; - int duty_inc; - enum led_color color; - int duty; -} led_pulse; - -#define LED_PULSE_TICK(interval, color) \ - config_tick((interval), 100 / (LED_PULSE_US / (interval)), (color)) - -static void config_tick(uint32_t interval, int duty_inc, enum led_color color) -{ - led_pulse.interval = interval; - led_pulse.duty_inc = duty_inc; - led_pulse.color = color; - led_pulse.duty = 0; -} - -static void pulse_power_led(enum led_color color) -{ - set_color(EC_LED_ID_POWER_LED, color, led_pulse.duty); - if (led_pulse.duty + led_pulse.duty_inc > 100) - led_pulse.duty_inc = led_pulse.duty_inc * -1; - else if (led_pulse.duty + led_pulse.duty_inc < 0) - led_pulse.duty_inc = led_pulse.duty_inc * -1; - led_pulse.duty += led_pulse.duty_inc; -} - -static void led_tick(void); -DECLARE_DEFERRED(led_tick); -static void led_tick(void) -{ - uint32_t elapsed; - uint32_t next = 0; - uint32_t start = get_time().le.lo; - static uint8_t pwm_enabled = 0; - - if (!pwm_enabled) { - pwm_enable(PWM_CH_LED_RED, 1); - pwm_enable(PWM_CH_LED_BLUE, 1); - pwm_enabled = 1; - } - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - pulse_power_led(led_pulse.color); - elapsed = get_time().le.lo - start; - next = led_pulse.interval > elapsed ? led_pulse.interval - elapsed : 0; - hook_call_deferred(&led_tick_data, next); -} - -static void led_suspend(void) -{ - LED_PULSE_TICK(LED_PULSE_TICK_US, LED_BLUE); - led_tick(); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, led_suspend, HOOK_PRIO_DEFAULT); - -static void led_shutdown(void) -{ - hook_call_deferred(&led_tick_data, -1); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_OFF, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, led_shutdown, HOOK_PRIO_DEFAULT); - -static void led_resume(void) -{ - /* Assume there is no race condition with led_tick, which also - * runs in hook_task. */ - hook_call_deferred(&led_tick_data, -1); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_BLUE, 100); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, led_resume, HOOK_PRIO_DEFAULT); - -void led_alert(int enable) -{ - if (enable) { - /* Overwrite the current signal */ - config_tick(1 * SECOND, 100, LED_RED); - led_tick(); - } else { - /* Restore the previous signal */ - if (chipset_in_state(CHIPSET_STATE_ON)) - led_resume(); - else if (chipset_in_state(CHIPSET_STATE_SUSPEND)) - led_suspend(); - else if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) - led_shutdown(); - } -} - -void led_critical(void) -{ - hook_call_deferred(&led_tick_data, -1); - if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED)) - set_color(EC_LED_ID_POWER_LED, LED_RED, 100); -} - -static int command_led(int argc, char **argv) -{ - enum ec_led_id id = EC_LED_ID_POWER_LED; - - if (argc < 2) - return EC_ERROR_PARAM_COUNT; - - if (!strcasecmp(argv[1], "debug")) { - led_auto_control(id, !led_auto_control_is_enabled(id)); - ccprintf("o%s\n", led_auto_control_is_enabled(id) ? "ff" : "n"); - } else if (!strcasecmp(argv[1], "off")) { - set_color(id, LED_OFF, 0); - } else if (!strcasecmp(argv[1], "red")) { - set_color(id, LED_RED, 100); - } else if (!strcasecmp(argv[1], "blue")) { - set_color(id, LED_BLUE, 100); - } else if (!strcasecmp(argv[1], "amber")) { - set_color(id, LED_AMBER, 100); - } else if (!strcasecmp(argv[1], "alert")) { - led_alert(1); - } else if (!strcasecmp(argv[1], "crit")) { - led_critical(); - } else { - return EC_ERROR_PARAM1; - } - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(led, command_led, - "[debug|red|blue|amber|off|alert|crit]", - "Turn on/off LED."); - -void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) -{ - brightness_range[EC_LED_COLOR_RED] = 100; - brightness_range[EC_LED_COLOR_BLUE] = 100; - brightness_range[EC_LED_COLOR_AMBER] = 100; -} - -int led_set_brightness(enum ec_led_id id, const uint8_t *brightness) -{ - if (brightness[EC_LED_COLOR_RED]) - return set_color(id, LED_RED, brightness[EC_LED_COLOR_RED]); - else if (brightness[EC_LED_COLOR_BLUE]) - return set_color(id, LED_BLUE, brightness[EC_LED_COLOR_BLUE]); - else if (brightness[EC_LED_COLOR_AMBER]) - return set_color(id, LED_AMBER, brightness[EC_LED_COLOR_AMBER]); - else - return set_color(id, LED_OFF, 0); -} diff --git a/baseboard/kalista/usb_pd_policy.c b/baseboard/kalista/usb_pd_policy.c deleted file mode 100644 index 89af4b50fb..0000000000 --- a/baseboard/kalista/usb_pd_policy.c +++ /dev/null @@ -1,73 +0,0 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "atomic.h" -#include "extpower.h" -#include "charge_manager.h" -#include "common.h" -#include "console.h" -#include "driver/tcpm/anx74xx.h" -#include "driver/tcpm/ps8xxx.h" -#include "gpio.h" -#include "hooks.h" -#include "host_command.h" -#include "registers.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "util.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -#define PDO_FIXED_FLAGS (PDO_FIXED_UNCONSTRAINED | \ - PDO_FIXED_DATA_SWAP | \ - PDO_FIXED_COMM_CAP) - -const uint32_t pd_src_pdo[] = { - PDO_FIXED(5000, 3000, PDO_FIXED_FLAGS), -}; -const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo); - -int board_vbus_source_enabled(int port) -{ - if (port != 0) - return 0; - return gpio_get_level(GPIO_USB_C0_5V_EN); -} - -int pd_set_power_supply_ready(int port) -{ - /* Enable VBUS source */ - gpio_set_level(GPIO_USB_C0_5V_EN, 1); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -void pd_power_supply_reset(int port) -{ - /* Disable VBUS source */ - gpio_set_level(GPIO_USB_C0_5V_EN, 0); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_snk_is_vbus_provided(int port) -{ - return !gpio_get_level(GPIO_USB_C0_VBUS_WAKE_L); -} - -__override void pd_check_pr_role(int port, - enum pd_power_role pr_role, - int flags) -{ -} diff --git a/baseboard/keeby b/baseboard/keeby deleted file mode 120000 index 14558486f6..0000000000 --- a/baseboard/keeby +++ /dev/null @@ -1 +0,0 @@ -dedede
\ No newline at end of file diff --git a/baseboard/kukui/base_detect_kukui.c b/baseboard/kukui/base_detect_kukui.c deleted file mode 100644 index 68542b4fb6..0000000000 --- a/baseboard/kukui/base_detect_kukui.c +++ /dev/null @@ -1,231 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "base_state.h" -#include "board.h" -#include "charge_manager.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "timer.h" -#include "usb_pd.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USB, format, ## args) - -/* Krane base detection code */ - -/* Base detection and debouncing */ -#define BASE_DETECT_DEBOUNCE_US (20 * MSEC) - -/* - * If the base status is unclear (i.e. not within expected ranges, read - * the ADC value again every 500ms. - */ -#define BASE_DETECT_RETRY_US (500 * MSEC) - -enum kukui_pogo_device_type { - DEVICE_TYPE_ERROR = -2, - DEVICE_TYPE_UNKNOWN = -1, - DEVICE_TYPE_DETACHED = 0, -#ifdef VARIANT_KUKUI_POGO_DOCK - DEVICE_TYPE_DOCK, -#endif - DEVICE_TYPE_KEYBOARD, - DEVICE_TYPE_COUNT, -}; - -struct { - int mv_low, mv_high; -} static const pogo_detect_table[] = { - [DEVICE_TYPE_DETACHED] = {2700, 3500}, /* 10K, NC, around 3.3V */ -#ifdef VARIANT_KUKUI_POGO_DOCK - [DEVICE_TYPE_DOCK] = {141, 173}, /* 10K, 0.5K ohm */ -#endif - [DEVICE_TYPE_KEYBOARD] = {270, 400}, /* 10K, 1K ohm */ -}; -BUILD_ASSERT(ARRAY_SIZE(pogo_detect_table) == DEVICE_TYPE_COUNT); - -static uint64_t base_detect_debounce_time; -static enum kukui_pogo_device_type pogo_type; - -int kukui_pogo_extpower_present(void) -{ -#ifdef VARIANT_KUKUI_POGO_DOCK - return pogo_type == DEVICE_TYPE_DOCK && - gpio_get_level(GPIO_POGO_VBUS_PRESENT); -#else - return 0; -#endif -} - -static enum kukui_pogo_device_type get_device_type(int mv) -{ - int i; - - if (mv == ADC_READ_ERROR) - return DEVICE_TYPE_ERROR; - - for (i = 0; i < DEVICE_TYPE_COUNT; i++) { - if (pogo_detect_table[i].mv_low <= mv && - mv <= pogo_detect_table[i].mv_high) - return i; - } - - return DEVICE_TYPE_UNKNOWN; -} - -static void enable_charge(int enable) -{ -#ifdef VARIANT_KUKUI_POGO_DOCK - if (enable) { - struct charge_port_info info = { - .voltage = 5000, .current = 1500}; - /* - * Set supplier type to PD to have same priority as type c - * port. - */ - charge_manager_update_charge( - CHARGE_SUPPLIER_DEDICATED, CHARGE_PORT_POGO, &info); - } else { - charge_manager_update_charge( - CHARGE_SUPPLIER_DEDICATED, CHARGE_PORT_POGO, NULL); - } - pd_send_host_event(PD_EVENT_POWER_CHANGE); -#endif -} - -static void enable_power_supply(int enable) -{ - gpio_set_level(GPIO_EN_PP3300_POGO, enable); -} - -static void base_detect_deferred(void); -DECLARE_DEFERRED(base_detect_deferred); - -static void base_set_device_type(enum kukui_pogo_device_type device_type) -{ - switch (device_type) { - case DEVICE_TYPE_ERROR: - case DEVICE_TYPE_UNKNOWN: - hook_call_deferred(&base_detect_deferred_data, - BASE_DETECT_RETRY_US); - break; - - case DEVICE_TYPE_DETACHED: - enable_power_supply(0); - enable_charge(0); - base_set_state(0); - break; - -#ifdef VARIANT_KUKUI_POGO_DOCK - case DEVICE_TYPE_DOCK: - enable_power_supply(0); - enable_charge(1); - base_set_state(1); - break; -#endif - - case DEVICE_TYPE_KEYBOARD: - enable_charge(0); - enable_power_supply(1); - base_set_state(1); - break; - - case DEVICE_TYPE_COUNT: - /* should not happen */ - break; - } -} - -static void base_detect_deferred(void) -{ - uint64_t time_now = get_time().val; - int mv; - - if (base_detect_debounce_time > time_now) { - hook_call_deferred(&base_detect_deferred_data, - base_detect_debounce_time - time_now); - return; - } - - /* - * Disable interrupt first to prevent it triggered by value - * changed from 1 to disabled state(=0). - */ - gpio_disable_interrupt(GPIO_POGO_ADC_INT_L); - gpio_set_flags(GPIO_POGO_ADC_INT_L, GPIO_ANALOG); - mv = adc_read_channel(ADC_POGO_ADC_INT_L); - /* restore the pin function */ - gpio_set_flags(GPIO_POGO_ADC_INT_L, GPIO_INT_BOTH); - gpio_enable_interrupt(GPIO_POGO_ADC_INT_L); - - pogo_type = get_device_type(mv); - CPRINTS("POGO: adc=%d, type=%d", mv, pogo_type); - - base_set_device_type(pogo_type); -} - -void pogo_adc_interrupt(enum gpio_signal signal) -{ - uint64_t time_now = get_time().val; - - if (base_detect_debounce_time <= time_now) { - hook_call_deferred(&base_detect_deferred_data, - BASE_DETECT_DEBOUNCE_US); - } - - base_detect_debounce_time = time_now + BASE_DETECT_DEBOUNCE_US; -} - -static void pogo_chipset_init(void) -{ - /* Enable pogo interrupt */ - gpio_enable_interrupt(GPIO_POGO_ADC_INT_L); - - hook_call_deferred(&base_detect_deferred_data, 0); -} -DECLARE_HOOK(HOOK_INIT, pogo_chipset_init, HOOK_PRIO_DEFAULT); - -/* Called on AP S3 -> S5 transition */ -static void pogo_chipset_shutdown(void) -{ - /* Disable pogo interrupt */ - gpio_disable_interrupt(GPIO_POGO_ADC_INT_L); - - enable_power_supply(0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, pogo_chipset_shutdown, HOOK_PRIO_DEFAULT); - -void base_force_state(enum ec_set_base_state_cmd state) -{ - if (state >= EC_SET_BASE_STATE_RESET) { - CPRINTS("BD forced reset"); - pogo_chipset_init(); - return; - } - - gpio_disable_interrupt(GPIO_POGO_ADC_INT_L); - pogo_type = (state == 1 ? DEVICE_TYPE_KEYBOARD : DEVICE_TYPE_DETACHED); - base_set_device_type(state == EC_SET_BASE_STATE_ATTACH - ? DEVICE_TYPE_KEYBOARD - : DEVICE_TYPE_DETACHED); - CPRINTS("BD forced %sconnected", state == EC_SET_BASE_STATE_ATTACH ? - "" : "dis"); -} - -#ifdef VARIANT_KUKUI_POGO_DOCK -static void board_pogo_charge_init(void) -{ - int i; - - /* Initialize all charge suppliers to 0 */ - for (i = 0; i < CHARGE_SUPPLIER_COUNT; i++) - charge_manager_update_charge(i, CHARGE_PORT_POGO, NULL); -} -DECLARE_HOOK(HOOK_INIT, board_pogo_charge_init, - HOOK_PRIO_CHARGE_MANAGER_INIT + 1); -#endif diff --git a/baseboard/kukui/baseboard.c b/baseboard/kukui/baseboard.c deleted file mode 100644 index 3f9a1c36c6..0000000000 --- a/baseboard/kukui/baseboard.c +++ /dev/null @@ -1,222 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "charger.h" -#include "chipset.h" -#include "dma.h" -#include "gpio.h" -#include "hooks.h" -#include "keyboard_scan.h" -#include "registers.h" -#include "timer.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -#ifndef CONFIG_CHARGER_RUNTIME_CONFIG -#if defined(VARIANT_KUKUI_CHARGER_MT6370) -#include "driver/charger/rt946x.h" -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = RT946X_ADDR_FLAGS, - .drv = &rt946x_drv, - }, -}; -#elif defined(VARIANT_KUKUI_CHARGER_ISL9238) -#include "driver/charger/isl923x.h" -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; -#endif /* VARIANT_KUKUI_CHARGER_* */ - -#endif /* CONFIG_CHARGER_RUNTIME_CONFIG */ - -void board_reset_pd_mcu(void) -{ -} - -void board_config_pre_init(void) -{ -#ifdef VARIANT_KUKUI_EC_STM32F098 - STM32_RCC_AHBENR |= STM32_RCC_HB_DMA1; - /* - * Remap USART1 and SPI2 DMA: - * - * Ch4: USART1_TX / Ch5: USART1_RX (1000) - * Ch6: SPI2_RX / Ch7: SPI2_TX (0011) - */ - STM32_DMA_CSELR(STM32_DMAC_CH4) = (8 << 12) | (8 << 16) | - (3 << 20) | (3 << 24); - -#elif defined(VARIANT_KUKUI_EC_STM32L431) -#ifdef CONFIG_DMA - dma_init(); -#endif - /* - * Remap USART1 and SPI2 DMA: - * - * DMA2_CH=DMA1_CH+8 - * - * Ch6 (DMA2): USART1_TX / Ch7: USART1_RX (0010) - * Ch4 (DMA1): SPI2_RX / Ch5: SPI2_TX (0010) - * - * (*((volatile unsigned long *)(0x400200A8UL))) = 0x00011000; - * (*((volatile unsigned long *)(0x400204A8UL))) = 0x00200000; - */ - - STM32_DMA_CSELR(STM32_DMAC_CH4) = (1 << 12) | (1 << 16); - STM32_DMA_CSELR(STM32_DMAC_CH14) = (2 << 20) | (2 << 24); -#endif -} - -enum kukui_board_version { - BOARD_VERSION_UNKNOWN = -1, - BOARD_VERSION_REV0 = 0, - BOARD_VERSION_REV1 = 1, - BOARD_VERSION_REV2 = 2, - BOARD_VERSION_REV3 = 3, - BOARD_VERSION_REV4 = 4, - BOARD_VERSION_REV5 = 5, - BOARD_VERSION_REV6 = 6, - BOARD_VERSION_REV7 = 7, - BOARD_VERSION_REV8 = 8, - BOARD_VERSION_REV9 = 9, - BOARD_VERSION_REV10 = 10, - BOARD_VERSION_REV11 = 11, - BOARD_VERSION_REV12 = 12, - BOARD_VERSION_REV13 = 13, - BOARD_VERSION_REV14 = 14, - BOARD_VERSION_REV15 = 15, - BOARD_VERSION_COUNT, -}; - -/* map from kukui_board_version to board id voltage in mv */ -#ifdef VARIANT_KUKUI_EC_IT81202 -const int16_t kukui_board_id_map[] = { - 136, /* 51.1K , 2.2K(gru 3.3K) ohm */ - 388, /* 51.1k , 6.8K ohm */ - 584, /* 51.1K , 11K ohm */ - 785, /* 56K , 17.4K ohm */ - 993, /* 51.1K , 22K ohm */ - 1221, /* 51.1K , 30K ohm */ - 1433, /* 51.1K , 39.2K ohm */ - 1650, /* 56K , 56K ohm */ - 1876, /* 47K , 61.9K ohm */ - 2084, /* 47K , 80.6K ohm */ - 2273, /* 56K , 124K ohm */ - 2461, /* 51.1K , 150K ohm */ - 2672, /* 47K , 200K ohm */ - 2889, /* 47K , 330K ohm */ - 3086, /* 47K , 680K ohm */ - 3300, /* 56K , NC */ -}; - -#define THRESHOLD_MV 103 /* Simply assume 3300/16/2 */ -#else -const int16_t kukui_board_id_map[] = { - 109, /* 51.1K , 2.2K(gru 3.3K) ohm */ - 211, /* 51.1k , 6.8K ohm */ - 319, /* 51.1K , 11K ohm */ - 427, /* 56K , 17.4K ohm */ - 542, /* 51.1K , 22K ohm */ - 666, /* 51.1K , 30K ohm */ - 781, /* 51.1K , 39.2K ohm */ - 900, /* 56K , 56K ohm */ - 1023, /* 47K , 61.9K ohm */ - 1137, /* 47K , 80.6K ohm */ - 1240, /* 56K , 124K ohm */ - 1343, /* 51.1K , 150K ohm */ - 1457, /* 47K , 200K ohm */ - 1576, /* 47K , 330K ohm */ - 1684, /* 47K , 680K ohm */ - 1800, /* 56K , NC */ -}; - -#define THRESHOLD_MV 56 /* Simply assume 1800/16/2 */ -#endif /* VARIANT_KUKUI_EC_IT81202 */ -BUILD_ASSERT(ARRAY_SIZE(kukui_board_id_map) == BOARD_VERSION_COUNT); - -int board_get_version(void) -{ - static int version = BOARD_VERSION_UNKNOWN; - int mv; - int i; - - if (version != BOARD_VERSION_UNKNOWN) - return version; - - gpio_set_level(GPIO_EC_BOARD_ID_EN_L, 0); - /* Wait to allow cap charge */ - msleep(20); - mv = adc_read_channel(ADC_BOARD_ID); - - if (mv == ADC_READ_ERROR) - mv = adc_read_channel(ADC_BOARD_ID); - - gpio_set_level(GPIO_EC_BOARD_ID_EN_L, 1); - - for (i = 0; i < BOARD_VERSION_COUNT; ++i) { - if (mv < kukui_board_id_map[i] + THRESHOLD_MV) { - version = i; - break; - } - } - -#ifdef VARIANT_KUKUI_EC_STM32F098 - /* - * For devices without pogo, Disable ADC module after we detect the - * board version, since this is the only thing ADC module needs to do - * for this board. - */ - if (CONFIG_DEDICATED_CHARGE_PORT_COUNT == 0 && - version != BOARD_VERSION_UNKNOWN) - adc_disable(); -#endif - - return version; -} - -static void baseboard_spi_init(void) -{ -#if defined(VARIANT_KUKUI_EC_STM32F098) || defined(VARIANT_KUKUI_EC_STM32L431) - /* Set SPI PA15,PB3/4/5/13/14/15 pins to high speed */ - STM32_GPIO_OSPEEDR(GPIO_A) |= 0xc0000000; - STM32_GPIO_OSPEEDR(GPIO_B) |= 0xfc000fc0; -#endif -} -DECLARE_HOOK(HOOK_INIT, baseboard_spi_init, HOOK_PRIO_INIT_SPI + 1); - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY); -} - -/* Enable or disable input devices, based on chipset state and tablet mode */ -#ifdef VARIANT_KUKUI_JACUZZI -__override void lid_angle_peripheral_enable(int enable) -{ - int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON); - - if (enable) { - keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE); - } else { - /* - * Ensure that the chipset is off before disabling the - * keyboard. When the chipset is on, the EC keeps the - * keyboard enabled and the AP decides whether to - * ignore input devices or not. - */ - if (!chipset_in_s0) - keyboard_scan_enable(0, - KB_SCAN_DISABLE_LID_ANGLE); - } -} -#endif diff --git a/baseboard/kukui/baseboard.h b/baseboard/kukui/baseboard.h deleted file mode 100644 index 87ebeb40e1..0000000000 --- a/baseboard/kukui/baseboard.h +++ /dev/null @@ -1,357 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Kukui board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * Variant battery defines, pick one: - * VARIANT_KUKUI_BATTERY_MAX17055 - * VARIANT_KUKUI_BATTERY_MM8013 - * VARIANT_KUKUI_BATTERY_BQ27541 - * VARIANT_KUKUI_BATTERY_SMART - */ -#if defined(VARIANT_KUKUI_BATTERY_MAX17055) -#define CONFIG_BATTERY_MAX17055 -#define CONFIG_BATTERY_MAX17055_ALERT -#define BATTERY_MAX17055_RSENSE 5 /* m-ohm */ -#elif defined(VARIANT_KUKUI_BATTERY_MM8013) -#define CONFIG_BATTERY_MM8013 -#elif defined(VARIANT_KUKUI_BATTERY_BQ27541) -#define CONFIG_BATTERY_BQ27541 -#elif defined(VARIANT_KUKUI_BATTERY_SMART) -#define CONFIG_BATTERY_SMART -#define CONFIG_BATTERY_FUEL_GAUGE -#else -#error Must define a VARIANT_KUKUI_BATTERY -#endif /* VARIANT_KUKUI_BATTERY */ - -/* - * Variant charger defines, pick one: - * VARIANT_KUKUI_CHARGER_MT6370 - * VARIANT_KUKUI_CHARGER_ISL9238 - */ -#if defined(VARIANT_KUKUI_CHARGER_MT6370) -#define CONFIG_CHARGER_MT6370 -#define CONFIG_CHARGER_MT6370_BC12_GPIO -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER_OTG -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_USB_PD_TCPM_MT6370 -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE - -/* TCPC MT6370 */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* - * The Maximum input voltage is 13.5V, need another 5% tolerance. - * 12.85V * 1.05 = 13.5V - */ -#define PD_MAX_VOLTAGE_MV 12850 -#define CONFIG_USB_PD_PREFER_MV -#elif defined(VARIANT_KUKUI_CHARGER_ISL9238) -#define CONFIG_CHARGER_ISL9238C -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* BOARD_RS1 */ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* BOARD_RS2 */ -#define CONFIG_CHARGER_OTG -#define CONFIG_CHARGE_RAMP_HW - -/* TCPC FUSB302 */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 160000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* b/2230219: 15V has better charging performance than 20V */ -#define PD_MAX_VOLTAGE_MV 15000 -#else -#error Must define a VARIANT_KUKUI_CHARGER -#endif /* VARIANT_KUKUI_CHARGER */ - -/* - * Variant pogo defines, if pick, VARIANT_KUKUI_POGO_KEYBOARD is mandatory - * VARIANT_KUKUI_POGO_KEYBOARD - * VARIANT_KUKUI_POGO_DOCK - */ -#ifdef VARIANT_KUKUI_POGO_DOCK -#ifndef VARIANT_KUKUI_POGO_KEYBOARD -#error VARIANT_KUKUI_POGO_KEYBOARD is mandatory if use dock -#endif /* !VARIANT_KUKUI_POGO_KEYBOARD */ -#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT -#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 -#define DEDICATED_CHARGE_PORT 1 -#endif /* VARIANT_KUKUI_POGO_DOCK */ - -#ifdef VARIANT_KUKUI_POGO_KEYBOARD -#define CONFIG_DETACHABLE_BASE -#define CONFIG_BASE_ATTACHED_SWITCH -#endif - -/* define this if the board is jacuzzi family */ -#ifdef VARIANT_KUKUI_JACUZZI -#define CONFIG_HOSTCMD_AP_SET_SKUID -/* - * IT81202 based boards are variant of jacuzzi and I/O expander isn't required - * on them. - */ -#if defined(VARIANT_KUKUI_EC_STM32F098) || defined(VARIANT_KUKUI_EC_STM32L431) -#define CONFIG_IO_EXPANDER -#define CONFIG_IO_EXPANDER_IT8801 -#define CONFIG_IO_EXPANDER_PORT_COUNT 1 -#define CONFIG_KEYBOARD_NOT_RAW - -#endif - -#define CONFIG_KEYBOARD_COL2_INVERTED - -#define CONFIG_GMR_TABLET_MODE -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L -#define CONFIG_TABLET_MODE -#define CONFIG_TABLET_MODE_SWITCH - -#define PD_OPERATING_POWER_MW 30000 - -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) - -#else /* !VARIANT_KUKUI_JACUZZI */ - -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) |\ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) - -#endif /* VARIANT_KUKUI_JACUZZI */ - -#if defined(SECTION_IS_RW) || defined(VARIANT_KUKUI_EC_IT81202) -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#endif - -/* - * Define this flag if board controls dp mux via gpio pins USB_C0_DP_OE_L and - * USB_C0_DP_POLARITY. - * - * board must provide function board_set_dp_mux_control(output_enable, polarity) - * - * #define VARIANT_KUKUI_DP_MUX_GPIO - */ - -/* Optional modules */ -#define CONFIG_ADC -#undef CONFIG_ADC_WATCHDOG -#define CONFIG_CHIPSET_MT8183 -#define CONFIG_CMD_ACCELS -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_VIRTUAL_BATTERY -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_LED_COMMON -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_POWER_COMMON -#define CONFIG_SPI -#define CONFIG_SWITCH - -#ifdef SECTION_IS_RO -#undef CONFIG_SYSTEM_UNLOCKED /* Disabled in RO to save space */ -#else -#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands for testing */ -#endif - -/* Bootblock */ -#ifdef SECTION_IS_RO -#define CONFIG_BOOTBLOCK - -#define EMMC_SPI_PORT 2 -#endif - -/* Optional features */ -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_BUTTON_TRIGGERED_RECOVERY -#define CONFIG_CHARGER_ILIM_PIN_DISABLED -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_PRESERVE_LOGS - -/* Required for FAFT */ -#define CONFIG_CMD_BUTTON -#define CONFIG_CMD_CHARGEN - -/* By default, set hcdebug to off */ -#undef CONFIG_HOSTCMD_DEBUG_MODE -#define CONFIG_HOSTCMD_DEBUG_MODE HCDEBUG_OFF - -#define CONFIG_LTO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_IGNORE_LID -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_SOFTWARE_PANIC -#define CONFIG_VBOOT_HASH - -#define CONFIG_CHARGER -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 2 -#define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 15000 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM -#define CONFIG_USB_CHARGER - -/* Increase tx buffer size, as we'd like to stream EC log to AP. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -#define GPIO_LID_OPEN GPIO_HALL_INT_L - -#ifndef VARIANT_KUKUI_NO_SENSORS -#define CONFIG_ACCEL_FIFO -/* FIFO size is in power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#endif /* VARIANT_KUKUI_NO_SENSORS */ - -#ifndef VARIANT_KUKUI_TABLET_PWRBTN -#define POWERBTN_BOOT_DELAY 0 -#endif - -/* USB PD config */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_5V_EN_CUSTOM -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_PD_COMM_LOCKED - -#define CONFIG_BATTERY_CRITICAL_SHUTDOWN_CUT_OFF -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_REVIVE_DISCONNECT - -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) -#ifdef BOARD_KODAMA -#define PD_MAX_CURRENT_MA 2000 -#else -#define PD_MAX_CURRENT_MA 3000 -#endif - -/* Optional for testing */ -#undef CONFIG_PECI -#undef CONFIG_PSTORE - -#define CONFIG_TASK_PROFILING -#define CONFIG_MKBP_USE_GPIO - -/* - * Variant EC defines. Pick one: - * VARIANT_KUKUI_EC_STM32F098 - * VARIANT_KUKUI_EC_IT81202 - * VARIANT_KUKUI_EC_STM32L431 - */ -#if defined(VARIANT_KUKUI_EC_STM32F098) || defined(VARIANT_KUKUI_EC_STM32L431) -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_WATCHDOG 7 - -/* 48 MHz SYSCLK clock frequency */ -#ifdef VARIANT_KUKUI_EC_STM32L431 -#define CPU_CLOCK 80000000 -#else -#define CPU_CLOCK 48000000 -#endif - -#undef CONFIG_HIBERNATE -#define CONFIG_SPI_CONTROLLER -#define CONFIG_STM_HWTIMER32 -#define CONFIG_WATCHDOG_HELP -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 1 -#define CONFIG_UART_RX_DMA - -/* This option is limited to TCPMv1 */ -#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 -/* STM32F098 based boards use TCPMv1 */ -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_VBUS_DETECT_TCPC - -/* Modules we want to exclude */ -#undef CONFIG_CMD_BATTFAKE -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FLASHINFO -#undef CONFIG_CMD_HASH -#undef CONFIG_CMD_MD -#undef CONFIG_CMD_POWERINDEBUG -#undef CONFIG_CMD_TIMERINFO - -/* save space at RO image */ -#ifdef SECTION_IS_RO -#undef CONFIG_CMD_ADC -#undef CONFIG_CMD_APTHROTTLE -#undef CONFIG_CMD_CRASH -#undef CONFIG_CMD_HCDEBUG -#undef CONFIG_CMD_IDLE_STATS -#undef CONFIG_CMD_MFALLOW -#undef CONFIG_CMD_MMAPINFO -#undef CONFIG_CMD_PWR_AVG -#undef CONFIG_CMD_REGULATOR -#undef CONFIG_CMD_RW -#undef CONFIG_CMD_SHMEM -#undef CONFIG_CMD_SLEEPMASK -#undef CONFIG_CMD_SLEEPMASK_SET -#undef CONFIG_CMD_SYSLOCK -#undef CONFIG_CMD_TYPEC -#undef CONFIG_HOSTCMD_FLASHPD -#undef CONFIG_HOSTCMD_RWHASHPD -#undef CONFIG_CONSOLE_CMDHELP - -#undef CONFIG_HOSTCMD_GET_UPTIME_INFO -#undef CONFIG_CMD_AP_RESET_LOG -#undef CONFIG_CMD_I2C_SCAN -#undef CONFIG_CMD_I2C_XFER - -/* free flash space */ -#undef CONFIG_USB_PD_DEBUG_LEVEL -#define CONFIG_USB_PD_DEBUG_LEVEL 0 -#undef CONFIG_USB_PD_LOGGING -#define CONFIG_COMMON_GPIO_SHORTNAMES -#define CONFIG_DEBUG_ASSERT_BRIEF -/* Exclude PD state names from RO image to save space */ -#undef CONFIG_USB_PD_TCPMV1_DEBUG -#endif -#elif defined(VARIANT_KUKUI_EC_IT81202) -#define CONFIG_IT83XX_HARD_RESET_BY_GPG1 -#define CONFIG_IT83XX_VCC_1P8V - -/* IT81202 based boards use TCPMv2 */ -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 1 -#define CONFIG_USB_PD_TCPMV2 -#else -#error "Must define a VARIANT_KUKUI_EC_XXX!" -#endif - -#ifndef __ASSEMBLER__ -#ifdef VARIANT_KUKUI_DP_MUX_GPIO -void board_set_dp_mux_control(int output_enable, int polarity); -#endif /* VARIANT_KUKUI_DP_MUX_GPIO */ - -/* If POGO pin is providing power. */ -int kukui_pogo_extpower_present(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/kukui/battery_bq27541.c b/baseboard/kukui/battery_bq27541.c deleted file mode 100644 index 94f46b3326..0000000000 --- a/baseboard/kukui/battery_bq27541.c +++ /dev/null @@ -1,225 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery.h" -#include "charge_state.h" -#include "charger_mt6370.h" -#include "console.h" -#include "driver/tcpm/mt6370.h" -#include "ec_commands.h" -#include "util.h" - -#define TEMP_OUT_OF_RANGE TEMP_ZONE_COUNT - -#define BATT_ID 0 - -#define BATTERY_CPT_CHARGE_MIN_TEMP 0 -#define BATTERY_CPT_CHARGE_MAX_TEMP 50 - -#define CHARGER_LIMIT_TIMEOUT_HOURS 48 -#define CHARGER_LIMIT_TIMEOUT_HOURS_TEMP 2 - -#define BAT_LEVEL_PD_LIMIT 85 - -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) - -enum battery_type { - BATTERY_CPT = 0, - BATTERY_COUNT -}; - -static const struct battery_info info[] = { - [BATTERY_CPT] = { - .voltage_max = 4400, - .voltage_normal = 3850, - .voltage_min = 3000, - .precharge_voltage = 3400, - .precharge_current = 256, - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 50, - .discharging_min_c = -20, - .discharging_max_c = 60, - }, -}; - -const struct battery_info *battery_get_info(void) -{ - return &info[BATT_ID]; -} - -int charger_profile_override(struct charge_state_data *curr) -{ - static timestamp_t deadline_48; - static timestamp_t deadline_2; - int cycle_count = 0, rv, val; - unsigned char rcv = 0, rcv_cycle = 0, rcv_soh = 0; - /* (FullCharge Capacity / Design Capacity) * 100 = SOH */ - int full_cap = 0, design_cap = 0, soh = 0; - /* battery temp in 0.1 deg C */ - int bat_temp_c = curr->batt.temperature - 2731; - /* - * Keep track of battery temperature range: - * - * ZONE_0 ZONE_1 ZONE_2 - * -----+--------+--------+------------+----- Temperature (C) - * t0 t1 t2 t3 - */ - enum { - TEMP_ZONE_0, /* t0 < bat_temp_c <= t1 */ - TEMP_ZONE_1, /* t1 < bat_temp_c <= t2 */ - TEMP_ZONE_2, /* t2 < bat_temp_c <= t3 */ - TEMP_ZONE_3, /* t3 < bat_temp_c <= t4 */ - TEMP_ZONE_COUNT - } temp_zone; - - static struct { - int temp_min; /* 0.1 deg C */ - int temp_max; /* 0.1 deg C */ - int desired_current; /* mA */ - int desired_voltage; /* mV */ - } temp_zones[BATTERY_COUNT][TEMP_ZONE_COUNT] = { - [BATTERY_CPT] = { - /* TEMP_ZONE_0 */ - {BATTERY_CPT_CHARGE_MIN_TEMP * 10, 150, 1408, 4370}, - /* TEMP_ZONE_1 */ - {150, 430, 3520, 4370}, - /* TEMP_ZONE_2 */ - {430, 450, 2112, 4320}, - /* TEMP_ZONE_3 */ - {450, BATTERY_CPT_CHARGE_MAX_TEMP * 10, 1760, 4170}, - }, - }; - BUILD_ASSERT(ARRAY_SIZE(temp_zones[0]) == TEMP_ZONE_COUNT); - BUILD_ASSERT(ARRAY_SIZE(temp_zones) == BATTERY_COUNT); - - if ((curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE) || - (bat_temp_c < temp_zones[BATT_ID][0].temp_min) || - (bat_temp_c >= temp_zones[BATT_ID][TEMP_ZONE_COUNT - 1].temp_max)) - temp_zone = TEMP_OUT_OF_RANGE; - else { - for (temp_zone = 0; temp_zone < TEMP_ZONE_COUNT; temp_zone++) { - if (bat_temp_c < - temp_zones[BATT_ID][temp_zone].temp_max) - break; - } - } - - switch (temp_zone) { - case TEMP_ZONE_0: - case TEMP_ZONE_1: - case TEMP_ZONE_2: - case TEMP_ZONE_3: - curr->requested_current = - temp_zones[BATT_ID][temp_zone].desired_current; - curr->requested_voltage = - temp_zones[BATT_ID][temp_zone].desired_voltage; - break; - case TEMP_OUT_OF_RANGE: - curr->requested_current = curr->requested_voltage = 0; - curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; - curr->state = ST_IDLE; - break; - } - - /* Check cycle count to decrease charging voltage. */ - rv = battery_cycle_count(&val); - if (!rv) - cycle_count = val; - if (cycle_count > 20 && cycle_count <= 50) - rcv_cycle = 50; - else if (cycle_count > 50 && cycle_count <= 300) - rcv_cycle = 65; - else if (cycle_count > 300 && cycle_count <= 600) - rcv_cycle = 80; - else if (cycle_count > 600 && cycle_count <= 1000) - rcv_cycle = 100; - else if (cycle_count > 1000) - rcv_cycle = 150; - /* Check SOH to decrease charging voltage. */ - if (!battery_full_charge_capacity(&full_cap) && - !battery_design_capacity(&design_cap)) - soh = ((full_cap * 100) / design_cap); - if (soh > 70 && soh <= 75) - rcv_soh = 50; - else if (soh > 60 && soh <= 70) - rcv_soh = 65; - else if (soh > 55 && soh <= 60) - rcv_soh = 80; - else if (soh > 50 && soh <= 55) - rcv_soh = 100; - else if (soh <= 50) - rcv_soh = 150; - rcv = MAX(rcv_cycle, rcv_soh); - curr->requested_voltage -= rcv; - - /* Should not keep charging voltage > 4250mV for 48hrs. */ - if ((curr->state == ST_DISCHARGE) || - curr->chg.voltage < 4250) { - deadline_48.val = 0; - /* Starting count 48hours */ - } else if (curr->state == ST_CHARGE || - curr->state == ST_PRECHARGE) { - if (deadline_48.val == 0) - deadline_48.val = get_time().val + - CHARGER_LIMIT_TIMEOUT_HOURS * HOUR; - /* If charging voltage keep > 4250 for 48hrs, - * set charging voltage = 4250 - */ - else if (timestamp_expired(deadline_48, NULL)) - curr->requested_voltage = 4250; - } - /* Should not keeep battery voltage > 4100mV and - * battery temperature > 45C for two hour - */ - if (curr->state == ST_DISCHARGE || - curr->batt.voltage < 4100 || - bat_temp_c < 450) { - deadline_2.val = 0; - } else if (curr->state == ST_CHARGE || - curr->state == ST_PRECHARGE) { - if (deadline_2.val == 0) - deadline_2.val = get_time().val + - CHARGER_LIMIT_TIMEOUT_HOURS_TEMP * HOUR; - else if (timestamp_expired(deadline_2, NULL)) { - /* Set discharge and charging voltage = 4100mV */ - if (curr->batt.voltage >= 4100) { - curr->requested_current = 0; - curr->requested_voltage = 4100; - } - } - } - -#ifdef VARIANT_KUKUI_CHARGER_MT6370 - mt6370_charger_profile_override(curr); -#endif /* CONFIG_CHARGER_MT6370 */ - - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} - -int get_battery_manufacturer_name(char *dest, int size) -{ - static const char * const name[] = { - [BATTERY_CPT] = "AS1XXXD3Ka", - }; - ASSERT(dest); - strzcpy(dest, name[BATT_ID], size); - return EC_SUCCESS; -} diff --git a/baseboard/kukui/battery_max17055.c b/baseboard/kukui/battery_max17055.c deleted file mode 100644 index 6247f665aa..0000000000 --- a/baseboard/kukui/battery_max17055.c +++ /dev/null @@ -1,188 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery.h" -#include "charge_state.h" -#include "charger_mt6370.h" -#include "console.h" -#include "driver/battery/max17055.h" -#include "ec_commands.h" -#include "util.h" - -#define TEMP_OUT_OF_RANGE TEMP_ZONE_COUNT - -#define BATT_ID 0 - -#define BATTERY_SIMPLO_CHARGE_MIN_TEMP 0 -#define BATTERY_SIMPLO_CHARGE_MAX_TEMP 60 - -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) - -enum battery_type { - BATTERY_SIMPLO = 0, - BATTERY_COUNT -}; - -static const struct battery_info info[] = { - [BATTERY_SIMPLO] = { - .voltage_max = 4400, - .voltage_normal = 3860, - .voltage_min = 3000, - .precharge_current = 256, - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 60, - .discharging_min_c = -20, - .discharging_max_c = 60, - }, -}; - -static const struct max17055_batt_profile batt_profile[] = { - [BATTERY_SIMPLO] = { - .is_ez_config = 1, - .design_cap = MAX17055_DESIGNCAP_REG(6910), - .ichg_term = MAX17055_ICHGTERM_REG(235), - .v_empty_detect = MAX17055_VEMPTY_REG(3000, 3600), - }, -}; - -static const struct max17055_alert_profile alert_profile[] = { - [BATTERY_SIMPLO] = { - .v_alert_mxmn = VALRT_DISABLE, - .t_alert_mxmn = MAX17055_TALRTTH_REG( - BATTERY_SIMPLO_CHARGE_MAX_TEMP, - BATTERY_SIMPLO_CHARGE_MIN_TEMP), - .s_alert_mxmn = SALRT_DISABLE, - .i_alert_mxmn = IALRT_DISABLE, - }, -}; - -const struct max17055_batt_profile *max17055_get_batt_profile(void) -{ - return &batt_profile[BATT_ID]; -} - -const struct max17055_alert_profile *max17055_get_alert_profile(void) -{ - return &alert_profile[BATT_ID]; -} - -const struct battery_info *battery_get_info(void) -{ - return &info[BATT_ID]; -} - -enum battery_disconnect_state battery_get_disconnect_state(void) -{ - if (battery_is_present() == BP_YES) - return BATTERY_NOT_DISCONNECTED; - return BATTERY_DISCONNECTED; -} - -int charger_profile_override(struct charge_state_data *curr) -{ - /* battery temp in 0.1 deg C */ - int bat_temp_c = curr->batt.temperature - 2731; - - /* - * Keep track of battery temperature range: - * - * ZONE_0 ZONE_1 ZONE_2 - * -----+--------+--------+------------+----- Temperature (C) - * t0 t1 t2 t3 - */ - enum { - TEMP_ZONE_0, /* t0 < bat_temp_c <= t1 */ - TEMP_ZONE_1, /* t1 < bat_temp_c <= t2 */ - TEMP_ZONE_2, /* t2 < bat_temp_c <= t3 */ - TEMP_ZONE_3, /* t3 < bat_temp_c <= t4 */ - TEMP_ZONE_COUNT - } temp_zone; - static struct { - int temp_min; /* 0.1 deg C */ - int temp_max; /* 0.1 deg C */ - int desired_current; /* mA */ - int desired_voltage; /* mV */ - } temp_zones[BATTERY_COUNT][TEMP_ZONE_COUNT] = { - [BATTERY_SIMPLO] = { - /* Add a empty range here to avoid TEMP_ZONE_COUNT mismatch. */ - /* TEMP_ZONE_0 */ - {BATTERY_SIMPLO_CHARGE_MIN_TEMP * 10, - BATTERY_SIMPLO_CHARGE_MIN_TEMP * 10, 1772, 4376}, - /* TEMP_ZONE_1 */ - {BATTERY_SIMPLO_CHARGE_MIN_TEMP * 10, 150, 1772, 4376}, - /* TEMP_ZONE_2 */ - {150, 450, 4020, 4376}, - /* TEMP_ZONE_3 */ - {450, BATTERY_SIMPLO_CHARGE_MAX_TEMP * 10, 3350, 4300}, - }, - }; - BUILD_ASSERT(ARRAY_SIZE(temp_zones[BATT_ID]) == TEMP_ZONE_COUNT); - BUILD_ASSERT(ARRAY_SIZE(temp_zones) == BATTERY_COUNT); - - if ((curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE) || - (bat_temp_c < temp_zones[BATT_ID][0].temp_min) || - (bat_temp_c >= temp_zones[BATT_ID][TEMP_ZONE_COUNT - 1].temp_max)) - temp_zone = TEMP_OUT_OF_RANGE; - else { - for (temp_zone = 0; temp_zone < TEMP_ZONE_COUNT; temp_zone++) { - if (bat_temp_c < - temp_zones[BATT_ID][temp_zone].temp_max) - break; - } - } - - if (curr->state != ST_CHARGE) - return 0; - - switch (temp_zone) { - case TEMP_ZONE_0: - case TEMP_ZONE_1: - case TEMP_ZONE_2: - case TEMP_ZONE_3: - curr->requested_current = - temp_zones[BATT_ID][temp_zone].desired_current; - curr->requested_voltage = - temp_zones[BATT_ID][temp_zone].desired_voltage; - break; - case TEMP_OUT_OF_RANGE: - curr->requested_current = curr->requested_voltage = 0; - curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; - curr->state = ST_IDLE; - break; - } - -#ifdef VARIANT_KUKUI_CHARGER_MT6370 - mt6370_charger_profile_override(curr); -#endif /* CONFIG_CHARGER_MT6370 */ - - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} - -int get_battery_manufacturer_name(char *dest, int size) -{ - static const char * const name[] = { - [BATTERY_SIMPLO] = "SIMPLO", - }; - ASSERT(dest); - strzcpy(dest, name[BATT_ID], size); - return EC_SUCCESS; -} - diff --git a/baseboard/kukui/battery_mm8013.c b/baseboard/kukui/battery_mm8013.c deleted file mode 100644 index e7f422e561..0000000000 --- a/baseboard/kukui/battery_mm8013.c +++ /dev/null @@ -1,141 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery.h" -#include "charge_state.h" -#include "charger_mt6370.h" -#include "console.h" -#include "driver/tcpm/mt6370.h" -#include "ec_commands.h" -#include "util.h" - -#define TEMP_OUT_OF_RANGE TEMP_ZONE_COUNT - -#define BATT_ID 0 - -#define BATTERY_SCUD_CHARGE_MIN_TEMP 0 -#define BATTERY_SCUD_CHARGE_MAX_TEMP 50 - -#define BAT_LEVEL_PD_LIMIT 85 - -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) - -enum battery_type { - BATTERY_SCUD = 0, - BATTERY_COUNT -}; - -static const struct battery_info info[] = { - [BATTERY_SCUD] = { - .voltage_max = 4400, - .voltage_normal = 3850, - .voltage_min = 3000, - .precharge_voltage = 3400, - .precharge_current = 256, - .start_charging_min_c = 0, - .start_charging_max_c = 45, - .charging_min_c = 0, - .charging_max_c = 50, - .discharging_min_c = -20, - .discharging_max_c = 59, - }, -}; - -const struct battery_info *battery_get_info(void) -{ - return &info[BATT_ID]; -} - -enum battery_disconnect_state battery_get_disconnect_state(void) -{ - if (battery_is_present() == BP_YES) - return BATTERY_NOT_DISCONNECTED; - return BATTERY_DISCONNECTED; -} - -int charger_profile_override(struct charge_state_data *curr) -{ - /* battery temp in 0.1 deg C */ - int bat_temp_c = curr->batt.temperature - 2731; - /* - * Keep track of battery temperature range: - * - * ZONE_0 ZONE_1 ZONE_2 - * -----+--------+--------+------------+----- Temperature (C) - * t0 t1 t2 t3 - */ - enum { - TEMP_ZONE_0, /* t0 < bat_temp_c <= t1 */ - TEMP_ZONE_1, /* t1 < bat_temp_c <= t2 */ - TEMP_ZONE_2, /* t2 < bat_temp_c <= t3 */ - TEMP_ZONE_COUNT - } temp_zone; - - static struct { - int temp_min; /* 0.1 deg C */ - int temp_max; /* 0.1 deg C */ - int desired_current; /* mA */ - int desired_voltage; /* mV */ - } temp_zones[BATTERY_COUNT][TEMP_ZONE_COUNT] = { - [BATTERY_SCUD] = { - /* TEMP_ZONE_0 */ - {BATTERY_SCUD_CHARGE_MIN_TEMP * 10, 150, 1400, 4400}, - /* TEMP_ZONE_1 */ - {150, 450, 3500, 4400}, - /* TEMP_ZONE_2 */ - {450, BATTERY_SCUD_CHARGE_MAX_TEMP * 10, 3500, 4200}, - }, - }; - BUILD_ASSERT(ARRAY_SIZE(temp_zones[0]) == TEMP_ZONE_COUNT); - BUILD_ASSERT(ARRAY_SIZE(temp_zones) == BATTERY_COUNT); - - if ((curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE) || - (bat_temp_c < temp_zones[BATT_ID][0].temp_min) || - (bat_temp_c >= temp_zones[BATT_ID][TEMP_ZONE_COUNT - 1].temp_max)) - temp_zone = TEMP_OUT_OF_RANGE; - else { - for (temp_zone = 0; temp_zone < TEMP_ZONE_COUNT; temp_zone++) { - if (bat_temp_c < - temp_zones[BATT_ID][temp_zone].temp_max) - break; - } - } - - switch (temp_zone) { - case TEMP_ZONE_0: - case TEMP_ZONE_1: - case TEMP_ZONE_2: - curr->requested_current = - temp_zones[BATT_ID][temp_zone].desired_current; - curr->requested_voltage = - temp_zones[BATT_ID][temp_zone].desired_voltage; - break; - case TEMP_OUT_OF_RANGE: - curr->requested_current = curr->requested_voltage = 0; - curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; - curr->state = ST_IDLE; - break; - } - -#ifdef VARIANT_KUKUI_CHARGER_MT6370 - mt6370_charger_profile_override(curr); -#endif /* CONFIG_CHARGER_MT6370 */ - - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} diff --git a/baseboard/kukui/battery_smart.c b/baseboard/kukui/battery_smart.c deleted file mode 100644 index ba2af17443..0000000000 --- a/baseboard/kukui/battery_smart.c +++ /dev/null @@ -1,138 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Battery pack vendor provided charging profile - */ - -#include "battery.h" -#include "battery_fuel_gauge.h" -#include "battery_smart.h" -#include "timer.h" -#include "util.h" - -enum battery_present batt_pres_prev = BP_NOT_SURE; - -/* - * Physical detection of battery. - */ -static enum battery_present battery_check_present_status(void) -{ - enum battery_present batt_pres = BP_NOT_SURE; - -#ifdef CONFIG_BATTERY_HW_PRESENT_CUSTOM - /* Get the physical hardware status */ - batt_pres = battery_hw_present(); -#endif - - /* - * If the battery is not physically connected, then no need to perform - * any more checks. - */ - if (batt_pres == BP_NO) - return batt_pres; - - /* - * If the battery is present now and was present last time we checked, - * return early. - */ - if (batt_pres == batt_pres_prev) - return batt_pres; - - /* - * Check battery disconnect status. If we are unable to read battery - * disconnect status, then return BP_NOT_SURE. Battery could be in ship - * mode and might require pre-charge current to wake it up. BP_NO is not - * returned here because charger state machine will not provide - * pre-charge current assuming that battery is not present. - */ - if (battery_get_disconnect_state() == BATTERY_DISCONNECT_ERROR) - return BP_NOT_SURE; - - /* Ensure the battery is not in cutoff state */ - if (battery_is_cut_off() != BATTERY_CUTOFF_STATE_NORMAL) - return BP_NO; - - return batt_pres; -} - -enum battery_present battery_is_present(void) -{ - batt_pres_prev = battery_check_present_status(); - return batt_pres_prev; -} - -#ifdef CONFIG_I2C_BITBANG -static void fix_single_param(int flag, int *cached, int *curr) -{ - if (flag) - *curr = *cached; - else - *cached = *curr; -} - -#define CACHE_INVALIDATION_TIME_US (5 * SECOND) - -/* - * b:144195782: bitbang fails randomly, and there's no way to - * notify kernel side that bitbang read failed. - * Thus, if any value in batt_params is bad, replace it with a cached - * good value, to make sure we never send random numbers to kernel - * side. - */ -__override void board_battery_compensate_params(struct batt_params *batt) -{ - static struct batt_params batt_cache = { 0 }; - static timestamp_t deadline; - - /* - * If battery keeps failing for 5 seconds, stop hiding the error and - * report back to host. - */ - if (batt->flags & BATT_FLAG_BAD_ANY) { - if (timestamp_expired(deadline, NULL)) - return; - } else { - deadline.val = get_time().val + CACHE_INVALIDATION_TIME_US; - } - - /* return cached values for at most CACHE_INVALIDATION_TIME_US */ - fix_single_param(batt->flags & BATT_FLAG_BAD_STATE_OF_CHARGE, - &batt_cache.state_of_charge, - &batt->state_of_charge); - fix_single_param(batt->flags & BATT_FLAG_BAD_VOLTAGE, - &batt_cache.voltage, - &batt->voltage); - fix_single_param(batt->flags & BATT_FLAG_BAD_CURRENT, - &batt_cache.current, - &batt->current); - fix_single_param(batt->flags & BATT_FLAG_BAD_DESIRED_VOLTAGE, - &batt_cache.desired_voltage, - &batt->desired_voltage); - fix_single_param(batt->flags & BATT_FLAG_BAD_DESIRED_CURRENT, - &batt_cache.desired_current, - &batt->desired_current); - fix_single_param(batt->flags & BATT_FLAG_BAD_REMAINING_CAPACITY, - &batt_cache.remaining_capacity, - &batt->remaining_capacity); - fix_single_param(batt->flags & BATT_FLAG_BAD_FULL_CAPACITY, - &batt_cache.full_capacity, - &batt->full_capacity); - fix_single_param(batt->flags & BATT_FLAG_BAD_STATUS, - &batt_cache.status, - &batt->status); - fix_single_param(batt->flags & BATT_FLAG_BAD_TEMPERATURE, - &batt_cache.temperature, - &batt->temperature); - /* - * If battery_compensate_params() didn't calculate display_charge - * for us, also update it with last good value. - */ - fix_single_param(batt->display_charge == 0, - &batt_cache.display_charge, - &batt->display_charge); - - /* remove bad flags after applying cached values */ - batt->flags &= ~BATT_FLAG_BAD_ANY; -} -#endif /* CONFIG_I2C_BITBANG */ diff --git a/baseboard/kukui/build.mk b/baseboard/kukui/build.mk deleted file mode 100644 index c64f6978c8..0000000000 --- a/baseboard/kukui/build.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -*- makefile -*- -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -# Select eMMC CMD0 driver. -EMMC_CMD0_DRIVER=$(if $(CHIP_IT83XX),emmc_ite.o,emmc.o) - -baseboard-y=baseboard.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o -baseboard-$(CONFIG_BOOTBLOCK)+=$(EMMC_CMD0_DRIVER) - -baseboard-$(VARIANT_KUKUI_BATTERY_MAX17055)+=battery_max17055.o -baseboard-$(VARIANT_KUKUI_BATTERY_MM8013)+=battery_mm8013.o -baseboard-$(VARIANT_KUKUI_BATTERY_BQ27541)+=battery_bq27541.o -baseboard-$(VARIANT_KUKUI_BATTERY_SMART)+=battery_smart.o - -baseboard-$(VARIANT_KUKUI_CHARGER_MT6370)+=charger_mt6370.o - -baseboard-$(VARIANT_KUKUI_POGO_KEYBOARD)+=base_detect_kukui.o - -$(out)/RO/baseboard/$(BASEBOARD)/$(EMMC_CMD0_DRIVER): $(out)/bootblock_data.h - -# bootblock size from 12769.0 -DEFAULT_BOOTBLOCK_SIZE:=21504 diff --git a/baseboard/kukui/charger_mt6370.c b/baseboard/kukui/charger_mt6370.c deleted file mode 100644 index 327b567db6..0000000000 --- a/baseboard/kukui/charger_mt6370.c +++ /dev/null @@ -1,366 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "charger_mt6370.h" -#include "console.h" -#include "driver/charger/rt946x.h" -#include "driver/tcpm/mt6370.h" -#include "hooks.h" -#include "power.h" -#include "timer.h" -#include "usb_common.h" -#include "usb_pd.h" -#include "util.h" - -#define BAT_LEVEL_PD_LIMIT 85 -#define SYSTEM_PLT_MW 3500 -/* - * b/143318064: Prefer a voltage above 5V to force it picks a voltage - * above 5V at first. If PREFER_MV is 5V, when desired power is around - * 15W ~ 11W, it would pick 5V/3A initially, and mt6370 can only sink - * around 10W, and cause a low charging efficiency. - */ -#define PREVENT_CURRENT_DROP_MV 6000 -#define DEFAULT_PREFER_MV 5000 -/* - * We empirically chose 300mA as the limit for when buck inefficiency is - * noticeable. - */ -#define STABLE_CURRENT_DELTA 300 - -struct pd_pref_config_t pd_pref_config = { - .mv = PREVENT_CURRENT_DROP_MV, - .cv = 70, - .plt_mw = SYSTEM_PLT_MW, - .type = PD_PREFER_BUCK, -}; - -static void update_plt_suspend(void) -{ - pd_pref_config.plt_mw = 0; -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, update_plt_suspend, HOOK_PRIO_DEFAULT); - -static void update_plt_resume(void) -{ - pd_pref_config.plt_mw = SYSTEM_PLT_MW; -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, update_plt_resume, HOOK_PRIO_DEFAULT); - -#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args) - -/* wait time to evaluate charger thermal status */ -static timestamp_t thermal_wait_until; -/* input current bound when charger throttled */ -static int throttled_ma = PD_MAX_CURRENT_MA; -/* charge_ma in last board_set_charge_limit call */ -static int prev_charge_limit; -/* charge_mv in last board_set_charge_limit call */ -static int prev_charge_mv; - -#ifndef CONFIG_BATTERY_SMART -int board_cut_off_battery(void) -{ - /* The cut-off procedure is recommended by Richtek. b/116682788 */ - rt946x_por_reset(); - mt6370_vconn_discharge(0); - rt946x_cutoff_battery(); - - return EC_SUCCESS; -} -#endif - -static void board_set_charge_limit_throttle(int charge_ma, int charge_mv) -{ - charge_set_input_current_limit( - MIN(throttled_ma, MAX(charge_ma, CONFIG_CHARGER_INPUT_CURRENT)), - charge_mv); -} - -static void battery_thermal_control(struct charge_state_data *curr) -{ - int input_current, jc_temp; - static int skip_reset; - /* - * mt6370's input current setting is 50mA step, use 50 as well for - * easy value mapping. - */ - const int k_p = 50; - - if (charge_manager_get_charger_voltage() == 5000 || - curr->state != ST_CHARGE) { - /* We already set the charge limit, do not reset it again. */ - if (skip_reset) - return; - skip_reset = 1; - thermal_wait_until.val = 0; - throttled_ma = PD_MAX_CURRENT_MA; - board_set_charge_limit_throttle(prev_charge_limit, - prev_charge_mv); - return; - } - - skip_reset = 0; - - if (thermal_wait_until.val == 0) - goto thermal_exit; - - if (get_time().val < thermal_wait_until.val) - return; - - /* If we fail to read adc, skip for this cycle. */ - if (rt946x_get_adc(MT6370_ADC_TEMP_JC, &jc_temp)) - return; - - /* If we fail to read input curr limit, skip for this cycle. */ - if (charger_get_input_current_limit(CHARGER_SOLO, &input_current)) - return; - - /* - * If input current limit is maximum, and we are under thermal budget, - * just skip. - */ - if (input_current == PD_MAX_CURRENT_MA && - jc_temp < thermal_bound.target + thermal_bound.err) - return; - - /* If the temp is within +- err, thermal is under control */ - if (jc_temp < thermal_bound.target + thermal_bound.err && - jc_temp > thermal_bound.target - thermal_bound.err) - return; - - /* - * PID algorithm (https://en.wikipedia.org/wiki/PID_controller), - * and operates on only P value. - */ - throttled_ma = MIN( - PD_MAX_CURRENT_MA, - /* - * Should not pass the previously set input current by - * charger manager. This value might be related the charger's - * capability. - */ - MIN(prev_charge_limit, - input_current + k_p * (thermal_bound.target - jc_temp))); - - /* If the input current doesn't change, just skip. */ - if (throttled_ma != input_current) - board_set_charge_limit_throttle(throttled_ma, prev_charge_mv); - -thermal_exit: - thermal_wait_until.val = get_time().val + (3 * SECOND); -} - -int command_jc(int argc, char **argv) -{ - static int prev_jc_temp; - int jc_temp; - - if (rt946x_get_adc(MT6370_ADC_TEMP_JC, &jc_temp)) - jc_temp = prev_jc_temp; - - ccprintf("JC Temp: %d\n", jc_temp); - prev_jc_temp = jc_temp; - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(jc, command_jc, "", "mt6370 junction temp"); - -/* - * b/143318064: A workwround for mt6370 bad buck efficiency. - * If the delta of VBUS and VBAT(on krane, desired voltage 4.4V) is too small - * (i.e. < 500mV), the buck throughput will be bounded, and causing that we - * can't drain 5V/3A when battery SoC above around 40%. - * This function watches battery current. If we see battery current drops after - * switching from high voltage to 5V (This will happen if we enable - * CONFIG_USB_PD_PREFER_MV and set prefer votage to 5V), the charger will lost - * power due to the inefficiency (e.g. switch from 9V/1.67A = 15W to 5V/3A, - * but mt6370 would only sink less than 5V/2.4A = 12W), and we will request a - * higher voltage PDO to prevent a slow charging time. - */ -static void battery_desired_curr_dynamic(struct charge_state_data *curr) -{ - static int prev_stable_current = CHARGE_CURRENT_UNINITIALIZED; - static int prev_supply_voltage; - int supply_voltage; - int stable_current; - int delta_current; - - if (curr->state != ST_CHARGE) { - prev_supply_voltage = 0; - prev_stable_current = CHARGE_CURRENT_UNINITIALIZED; - /* - * Always force higher voltage on first PD negotiation. - * When desired power is around 15W ~ 11W, PD would pick - * 5V/3A initially, but mt6370 can't drain that much, and - * causes a low charging efficiency. - */ - pd_pref_config.mv = PREVENT_CURRENT_DROP_MV; - return; - } - - supply_voltage = charge_manager_get_charger_voltage(); - stable_current = charge_get_stable_current(); - - if (!charge_is_current_stable()) - return; - - if (!prev_supply_voltage) - goto update_charge; - - delta_current = prev_stable_current - stable_current; - if (curr->batt.state_of_charge >= pd_pref_config.cv && - supply_voltage == DEFAULT_PREFER_MV && - prev_supply_voltage > supply_voltage && - delta_current > STABLE_CURRENT_DELTA) { - /* Raise perfer voltage above 5000mV */ - pd_pref_config.mv = PREVENT_CURRENT_DROP_MV; - /* - * Delay stable current evaluation for 5 mins if we see a - * current drop. It's a reasonable waiting time since that - * the battery desired current can't catch the gap that fast - * in the period. - */ - charge_reset_stable_current_us(5 * MINUTE); - /* Rewrite the stable current to re-evalute desired watt */ - charge_set_stable_current(prev_stable_current); - - /* - * do not alter current by thermal if we just raising PD - * voltage - */ - thermal_wait_until.val = get_time().val + (10 * SECOND); - } else { - pd_pref_config.mv = DEFAULT_PREFER_MV; - /* - * If the power supply is plugged while battery full, - * the stable_current will always be 0 such that we are unable - * to switch to 5V. We force evaluating PDO to switch to 5V. - */ - if (prev_supply_voltage == supply_voltage && !stable_current && - !prev_stable_current && - supply_voltage != DEFAULT_PREFER_MV && - charge_manager_get_supplier() == CHARGE_SUPPLIER_PD) - pd_set_new_power_request( - charge_manager_get_active_charge_port()); - } - -update_charge: - prev_supply_voltage = supply_voltage; - prev_stable_current = stable_current; -} - -#ifdef CONFIG_BATTERY_SMART -static void charge_enable_eoc_and_te(void) -{ - rt946x_enable_charge_eoc(1); - rt946x_enable_charge_termination(1); -} -DECLARE_DEFERRED(charge_enable_eoc_and_te); -#endif - -void mt6370_charger_profile_override(struct charge_state_data *curr) -{ - static int previous_chg_limit_mv; - int chg_limit_mv = pd_get_max_voltage(); - - battery_desired_curr_dynamic(curr); - - battery_thermal_control(curr); - -#ifdef CONFIG_BATTERY_SMART - /* - * SMP battery uses HW pre-charge circuit and pre-charge current is - * limited to ~50mA. Once the charge current is lower than IEOC level - * within CHG_TEDG_EOC, and TE is enabled, the charging power path will - * be turned off. Disable EOC and TE when battery stays over discharge - * state, otherwise enable EOC and TE. - */ - if (!(curr->batt.flags & BATT_FLAG_BAD_VOLTAGE)) { - const struct battery_info *batt_info = battery_get_info(); - static int normal_charge_lock, over_discharge_lock; - - if (curr->batt.voltage < batt_info->voltage_min) { - normal_charge_lock = 0; - - if (!over_discharge_lock && curr->state == ST_CHARGE) { - over_discharge_lock = 1; - rt946x_enable_charge_eoc(0); - rt946x_enable_charge_termination(0); - } - } else { - over_discharge_lock = 0; - - if (!normal_charge_lock) { - normal_charge_lock = 1; - /* - * b/148045048: When the battery is activated - * in shutdown mode, the adapter cannot boot - * DUT automatically. It's a workaround to - * delay 4.5 second to enable charger EOC - * and TE function. - */ - hook_call_deferred( - &charge_enable_eoc_and_te_data, - (4.5 * SECOND)); - } - } - } -#endif - - /* Limit input (=VBUS) to 5V when soc > 85% and charge current < 1A. */ - if (!(curr->batt.flags & BATT_FLAG_BAD_CURRENT) && - charge_get_percent() > BAT_LEVEL_PD_LIMIT && - curr->batt.current < 1000 && power_get_state() != POWER_S0) - chg_limit_mv = 5500; - else - chg_limit_mv = PD_MAX_VOLTAGE_MV; - - if (chg_limit_mv != previous_chg_limit_mv) - CPRINTS("VBUS limited to %dmV", chg_limit_mv); - previous_chg_limit_mv = chg_limit_mv; - - /* Pull down VBUS */ - if (pd_get_max_voltage() != chg_limit_mv) - pd_set_external_voltage_limit(0, chg_limit_mv); - - /* - * When the charger says it's done charging, even if fuel gauge says - * SOC < BATTERY_LEVEL_NEAR_FULL, we'll overwrite SOC with - * BATTERY_LEVEL_NEAR_FULL. So we can ensure both Chrome OS UI - * and battery LED indicate full charge. - * - * Enable this hack on on-board gauge only (b/142097561) - */ - if (IS_ENABLED(CONFIG_BATTERY_MAX17055) && rt946x_is_charge_done()) { - curr->batt.state_of_charge = MAX(BATTERY_LEVEL_NEAR_FULL, - curr->batt.state_of_charge); - } - -} - -#ifndef CONFIG_BATTERY_SMART -static void board_charge_termination(void) -{ - static uint8_t te; - /* Enable charge termination when we are sure battery is present. */ - if (!te && battery_is_present() == BP_YES) { - if (!rt946x_enable_charge_termination(1)) - te = 1; - } -} -DECLARE_HOOK(HOOK_BATTERY_SOC_CHANGE, - board_charge_termination, - HOOK_PRIO_DEFAULT); -#endif - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - prev_charge_limit = charge_ma; - prev_charge_mv = charge_mv; - board_set_charge_limit_throttle(charge_ma, charge_mv); -} diff --git a/baseboard/kukui/charger_mt6370.h b/baseboard/kukui/charger_mt6370.h deleted file mode 100644 index 880b00a1a8..0000000000 --- a/baseboard/kukui/charger_mt6370.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __CROS_EC_BASEBOARD_CHARGER_MT6370_H -#define __CROS_EC_BASEBOARD_CHARGER_MT6370_H - -#include "charge_state.h" - -void mt6370_charger_profile_override(struct charge_state_data *curr); - -struct mt6370_thermal_bound { - /* mt6370 junction's thermal target in Celsius degree */ - int target; - /* mt6370 junction's thermal evaluation error in Celsius degree */ - int err; -}; - -extern struct mt6370_thermal_bound thermal_bound; -#endif diff --git a/baseboard/kukui/emmc.c b/baseboard/kukui/emmc.c deleted file mode 100644 index 68953d8923..0000000000 --- a/baseboard/kukui/emmc.c +++ /dev/null @@ -1,400 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Transfer bootblock over SPI by emulating eMMC "Alternative Boot operation" - * (section 6.3.4 of eMMC 5.0 specification, JESD84-B50). - * - * eMMC boot operation looks a lot like SPI: CMD is unidirectional MOSI, DAT is - * unidirectional MISO. CLK is driven by the master. However, there is no - * chip-select, and the clock is active for a long time before any command is - * sent on the CMD line. From SPI perspective, this looks like a lot of '1' - * are being sent from the master. - * - * To catch the commands, we setup DMA to write the data into a circular buffer - * (in_msg), and monitor for a falling edge on CMD (emmc_cmd_interrupt). Once - * an interrupt is received, we scan the circular buffer, in reverse, to - * be as fast as possible and minimize chances of missing the command. - * - * We then figure out the bit-wise command alignment, decode it, and, upon - * receiving BOOT_INITIATION command, setup DMA to respond with the data on the - * DAT line. The data in bootblock_data.h is preprocessed to include necessary - * eMMC headers: acknowledge boot mode, start of block, CRC, end of block, etc. - * The host can only slow down transfer by stopping the clock, which is - * compatible with SPI. - * - * In some cases (e.g. if the BootROM expects data over 8 lanes instead of 1), - * the BootROM will quickly interrupt the transfer with an IDLE command. In this - * case we interrupt the transfer, and the BootROM will try again. - */ - -#include "chipset.h" -#include "clock.h" -#include "console.h" -#include "dma.h" -#include "endian.h" -#include "gpio.h" -#include "hooks.h" -#include "hwtimer.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "util.h" - -#include "bootblock_data.h" - -#define CPRINTS(format, args...) cprints(CC_SPI, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_SPI, format, ## args) - -#if EMMC_SPI_PORT == 1 -#define STM32_SPI_EMMC_REGS STM32_SPI1_REGS -#define STM32_DMAC_SPI_EMMC_TX STM32_DMAC_SPI1_TX -#define STM32_DMAC_SPI_EMMC_RX STM32_DMAC_SPI1_RX -#elif EMMC_SPI_PORT == 2 -#define STM32_SPI_EMMC_REGS STM32_SPI2_REGS -#define STM32_DMAC_SPI_EMMC_TX STM32_DMAC_SPI2_TX -#define STM32_DMAC_SPI_EMMC_RX STM32_DMAC_SPI2_RX -#else -#error "Please define EMMC_SPI_PORT in board.h." -#endif - -/* Is eMMC emulation enabled? */ -static int emmc_enabled; - -/* Maximum amount of time to wait for AP to boot. */ -static timestamp_t boot_deadline; -#define BOOT_TIMEOUT (5 * SECOND) -#define EMMC_STATUS_CHECK_PERIOD (10 * MSEC) - -/* 1024 bytes circular buffer is enough for ~0.6ms @ 13Mhz. */ -#define SPI_RX_BUF_BYTES 1024 -#define SPI_RX_BUF_WORDS (SPI_RX_BUF_BYTES/4) -static uint32_t in_msg[SPI_RX_BUF_WORDS]; - -/* Macros to advance in the circular buffer. */ -#define RX_BUF_NEXT_32(i) (((i) + 1) & (SPI_RX_BUF_WORDS - 1)) -#define RX_BUF_DEC_32(i, j) (((i) - (j)) & (SPI_RX_BUF_WORDS - 1)) -#define RX_BUF_PREV_32(i) RX_BUF_DEC_32((i), 1) - -enum emmc_cmd { - EMMC_ERROR = -1, - EMMC_IDLE = 0, - EMMC_PRE_IDLE, - EMMC_BOOT, -}; - -static const struct dma_option dma_tx_option = { - STM32_DMAC_SPI_EMMC_TX, (void *)&STM32_SPI_EMMC_REGS->dr, - STM32_DMA_CCR_MSIZE_8_BIT | STM32_DMA_CCR_PSIZE_8_BIT -}; - -/* Circular RX buffer */ -static const struct dma_option dma_rx_option = { - STM32_DMAC_SPI_EMMC_RX, (void *)&STM32_SPI_EMMC_REGS->dr, - STM32_DMA_CCR_MSIZE_8_BIT | STM32_DMA_CCR_PSIZE_8_BIT | - STM32_DMA_CCR_CIRC -}; - -/* Setup DMA to transfer bootblock. */ -static void bootblock_transfer(void) -{ - static int transfer_try; - - dma_chan_t *txdma = dma_get_channel(STM32_DMAC_SPI_EMMC_TX); - - dma_prepare_tx(&dma_tx_option, sizeof(bootblock_raw_data), - bootblock_raw_data); - dma_go(txdma); - - CPRINTS("transfer %d", ++transfer_try); -} - -/* Abort an ongoing transfer. */ -static void bootblock_stop(void) -{ - const uint32_t timeout = 1 * MSEC; - uint32_t start; - - dma_disable(STM32_DMAC_SPI_EMMC_TX); - - /* - * Wait for SPI FIFO to become empty. - * We timeout after 1 ms in case the bus is not clocked anymore. - */ - start = __hw_clock_source_read(); - while (STM32_SPI_EMMC_REGS->sr & STM32_SPI_SR_FTLVL && - __hw_clock_source_read() - start < timeout) - ; - - /* Then flush SPI FIFO, and make sure DAT line stays idle (high). */ - STM32_SPI_EMMC_REGS->dr = 0xff; - STM32_SPI_EMMC_REGS->dr = 0xff; - STM32_SPI_EMMC_REGS->dr = 0xff; - STM32_SPI_EMMC_REGS->dr = 0xff; -} - -static enum emmc_cmd emmc_parse_command(int index) -{ - int32_t shift0; - uint32_t data[3]; - - if (in_msg[index] == 0xffffffff) - return EMMC_ERROR; - - data[0] = htobe32(in_msg[index]); - index = RX_BUF_NEXT_32(index); - data[1] = htobe32(in_msg[index]); - index = RX_BUF_NEXT_32(index); - data[2] = htobe32(in_msg[index]); - - /* Figure out alignment (cmd starts with 01) */ - - /* Number of leading ones. */ - shift0 = __builtin_clz(~data[0]); - - data[0] = (data[0] << shift0) | (data[1] >> (32-shift0)); - data[1] = (data[1] << shift0) | (data[2] >> (32-shift0)); - - if (data[0] == 0x40000000 && data[1] == 0x0095ffff) { - /* 400000000095 GO_IDLE_STATE */ - CPRINTS("goIdle"); - return EMMC_IDLE; - } - - if (data[0] == 0x40f0f0f0 && data[1] == 0xf0fdffff) { - /* 40f0f0f0f0fd GO_PRE_IDLE_STATE */ - CPRINTS("goPreIdle"); - return EMMC_PRE_IDLE; - } - - if (data[0] == 0x40ffffff && data[1] == 0xfae5ffff) { - /* 40fffffffae5 BOOT_INITIATION */ - CPRINTS("bootInit"); - return EMMC_BOOT; - } - - CPRINTS("eMMC error"); - return EMMC_ERROR; -} - - -/* - * Wake the EMMC task when there is a falling edge on the CMD line, so that we - * can capture the command. - */ -void emmc_cmd_interrupt(enum gpio_signal signal) -{ - task_wake(TASK_ID_EMMC); - CPRINTF("i"); -} - -static void emmc_init_spi(void) -{ -#if EMMC_SPI_PORT == 1 - /* Reset SPI */ - STM32_RCC_APB2RSTR |= STM32_RCC_PB2_SPI1; - STM32_RCC_APB2RSTR &= ~STM32_RCC_PB2_SPI1; - - /* Enable clocks to SPI module */ - STM32_RCC_APB2ENR |= STM32_RCC_PB2_SPI1; -#elif EMMC_SPI_PORT == 2 -#ifdef CHIP_FAMILY_STM32L4 - /* Reset SPI */ - STM32_RCC_APB1RSTR1 |= STM32_RCC_PB1_SPI2; - STM32_RCC_APB1RSTR1 &= ~STM32_RCC_PB1_SPI2; - - /* Enable clocks to SPI module */ - STM32_RCC_APB1ENR1 |= STM32_RCC_PB1_SPI2; -#else - /* Reset SPI */ - STM32_RCC_APB1RSTR |= STM32_RCC_PB1_SPI2; - STM32_RCC_APB1RSTR &= ~STM32_RCC_PB1_SPI2; - - /* Enable clocks to SPI module */ - STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2; -#endif -#else -#error "Please define EMMC_SPI_PORT in board.h." -#endif - clock_wait_bus_cycles(BUS_APB, 1); - gpio_config_module(MODULE_SPI_FLASH, 1); - - STM32_SPI_EMMC_REGS->cr2 = - STM32_SPI_CR2_FRXTH | STM32_SPI_CR2_DATASIZE(8) | - STM32_SPI_CR2_RXDMAEN | STM32_SPI_CR2_TXDMAEN; - - /* Manual CS, disable. */ - STM32_SPI_EMMC_REGS->cr1 = STM32_SPI_CR1_SSM | STM32_SPI_CR1_SSI; - - /* Flush SPI TX FIFO, and make sure DAT line stays idle (high). */ - STM32_SPI_EMMC_REGS->dr = 0xff; - STM32_SPI_EMMC_REGS->dr = 0xff; - STM32_SPI_EMMC_REGS->dr = 0xff; - STM32_SPI_EMMC_REGS->dr = 0xff; - - /* Enable the SPI peripheral */ - STM32_SPI_EMMC_REGS->cr1 |= STM32_SPI_CR1_SPE; -} -DECLARE_HOOK(HOOK_INIT, emmc_init_spi, HOOK_PRIO_INIT_SPI); - -static void emmc_check_status(void); -DECLARE_DEFERRED(emmc_check_status); - -static void emmc_enable_spi(void) -{ - if (emmc_enabled) - return; - - disable_sleep(SLEEP_MASK_EMMC); - - /* Start receiving in circular buffer in_msg. */ - dma_start_rx(&dma_rx_option, sizeof(in_msg), in_msg); - /* Enable internal chip select. */ - STM32_SPI_EMMC_REGS->cr1 &= ~STM32_SPI_CR1_SSI; - /* - * EMMC_CMD and SPI1_NSS share EXTI15, make sure GPIO_EMMC_CMD is - * selected. - */ - gpio_disable_interrupt(GPIO_SPI1_NSS); - gpio_enable_interrupt(GPIO_EMMC_CMD); - - emmc_enabled = 1; - CPRINTS("emmc enabled"); - - boot_deadline.val = get_time().val + BOOT_TIMEOUT; - - /* Check if AP has booted periodically. */ - hook_call_deferred(&emmc_check_status_data, EMMC_STATUS_CHECK_PERIOD); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, emmc_enable_spi, HOOK_PRIO_FIRST); - -static void emmc_disable_spi(void) -{ - if (!emmc_enabled) - return; - - /* Cancel check hook. */ - hook_call_deferred(&emmc_check_status_data, -1); - - gpio_disable_interrupt(GPIO_EMMC_CMD); - /* - * EMMC_CMD and SPI1_NSS share EXTI15, so re-enable interrupt on - * SPI1_NSS to reconfigure the interrupt selection. - */ - gpio_enable_interrupt(GPIO_SPI1_NSS); - /* Disable TX DMA. */ - dma_disable(STM32_DMAC_SPI_EMMC_TX); - /* Disable internal chip select. */ - STM32_SPI_EMMC_REGS->cr1 |= STM32_SPI_CR1_SSI; - /* Disable RX DMA. */ - dma_disable(STM32_DMAC_SPI_EMMC_RX); - - /* Blank out buffer to make sure we do not look at old data. */ - memset(in_msg, 0xff, sizeof(in_msg)); - - enable_sleep(SLEEP_MASK_EMMC); - - emmc_enabled = 0; - CPRINTS("emmc disabled"); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, emmc_disable_spi, HOOK_PRIO_FIRST); - -static void emmc_check_status(void) -{ - /* Bootblock switch disabled, switch off emulation */ - if (gpio_get_level(GPIO_BOOTBLOCK_EN_L) == 1) { - emmc_disable_spi(); - return; - } - - if (timestamp_expired(boot_deadline, NULL)) { - CPRINTS("emmc: AP failed to boot."); - chipset_force_shutdown(CHIPSET_SHUTDOWN_BOARD_CUSTOM); - return; - } - - /* Check if AP has booted again, next time. */ - hook_call_deferred(&emmc_check_status_data, EMMC_STATUS_CHECK_PERIOD); -} - -void emmc_task(void *u) -{ - int dma_pos, i; - dma_chan_t *rxdma; - enum emmc_cmd cmd; - /* Are we currently transmitting data? */ - int tx = 0; - - rxdma = dma_get_channel(STM32_DMAC_SPI_EMMC_RX); - - while (1) { - /* Wait for a command */ - task_wait_event(-1); - - dma_pos = dma_bytes_done(rxdma, sizeof(in_msg)) / 4; - i = RX_BUF_PREV_32(dma_pos); - - /* - * By now, bus should be idle again (it takes <10us to transmit - * a command, less than is needed to process interrupt and wake - * this task). - */ - if (in_msg[i] != 0xffffffff) { - CPRINTF("?"); - /* TODO(b:110907438): We should probably just retry. */ - continue; - } - - /* - * Find a command, looking from the end of the buffer to make - * it faster. - */ - while (i != dma_pos && in_msg[i] == 0xffffffff) - i = RX_BUF_PREV_32(i); - - /* - * We missed the command? That should not happen if we process - * the buffer quickly enough (and the interrupt was real). - */ - if (i == dma_pos) { - CPRINTF("!"); - continue; - } - - /* - * We found the end of the command, now find the beginning - * (commands are 6-byte long so the starting point is either 2 - * or 1 word before the end of the command). - */ - i = RX_BUF_DEC_32(i, 2); - if (in_msg[i] == 0xffffffff) - i = RX_BUF_NEXT_32(i); - - cmd = emmc_parse_command(i); - - if (!tx) { - /* - * When not transferring, host will send GO_IDLE_STATE, - * GO_PRE_IDLE_STATE, then BOOT_INITIATION commands. But - * all we really care about is the BOOT_INITIATION - * command: start the transfer. - */ - if (cmd == EMMC_BOOT) { - tx = 1; - bootblock_transfer(); - } - } else { - /* - * Host sends GO_IDLE_STATE to abort the transfer (e.g. - * when an incorrect number of lanes is used) and when - * the transfer is complete. - * Also react to GO_PRE_IDLE_STATE in case we missed - * GO_IDLE_STATE command. - */ - if (cmd == EMMC_IDLE || cmd == EMMC_PRE_IDLE) { - bootblock_stop(); - tx = 0; - } - } - } -} diff --git a/baseboard/kukui/emmc_ite.c b/baseboard/kukui/emmc_ite.c deleted file mode 100644 index 8c3e63064c..0000000000 --- a/baseboard/kukui/emmc_ite.c +++ /dev/null @@ -1,205 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "chipset.h" -#include "console.h" -#include "endian.h" -#include "gpio.h" -#include "hooks.h" -#include "hwtimer.h" -#include "intc.h" -#include "system.h" -#include "task.h" -#include "timer.h" -#include "util.h" - -#include "bootblock_data.h" - -#define CPRINTS(format, args...) cprints(CC_SPI, format, ## args) - -enum emmc_cmd { - EMMC_ERROR = -1, - EMMC_IDLE = 0, - EMMC_PRE_IDLE, - EMMC_BOOT, -}; - -static void emmc_reset_spi_tx(void) -{ - /* Reset TX FIFO and count monitor */ - IT83XX_SPI_TXFCR = IT83XX_SPI_TXFR | IT83XX_SPI_TXFCMR; - /* Send idle state (high/0xff) if master clocks in data. */ - IT83XX_SPI_FCR = 0; -} - -static void emmc_reset_spi_rx(void) -{ - /* End Rx FIFO access */ - IT83XX_SPI_TXRXFAR = 0; - /* Reset RX FIFO and count monitor */ - IT83XX_SPI_FCR = IT83XX_SPI_RXFR | IT83XX_SPI_RXFCMR; -} - -/* - * Set SPI module work as eMMC Alternative Boot Mode. - * (CS# pin isn't required, and dropping data until CMD goes low) - */ -static void emmc_enable_spi(void) -{ - /* Set SPI pin mux to eMMC (GPM2:CLK, GPM3:CMD, GPM6:DATA0) */ - IT83XX_GCTRL_PIN_MUX0 |= BIT(7); - /* Enable eMMC Alternative Boot Mode */ - IT83XX_SPI_EMMCBMR |= IT83XX_SPI_EMMCABM; - /* Reset TX and RX FIFO */ - emmc_reset_spi_tx(); - emmc_reset_spi_rx(); - /* Response idle state (high) */ - IT83XX_SPI_SPISRDR = 0xff; - /* FIFO will be overwritten once it's full */ - IT83XX_SPI_GCR2 = 0; - /* Write to clear pending interrupt bits */ - IT83XX_SPI_ISR = 0xff; - IT83XX_SPI_RX_VLISR = IT83XX_SPI_RVLI; - /* Enable RX fifo full interrupt */ - IT83XX_SPI_IMR = 0xff; - IT83XX_SPI_RX_VLISMR |= IT83XX_SPI_RVLIM; - IT83XX_SPI_IMR &= ~IT83XX_SPI_RX_FIFO_FULL; - /* - * Enable interrupt to detect AP's BOOTBLOCK_EN_L. So EC is able to - * switch SPI module back to communication mode once BOOTBLOCK_EN_L - * goes high (AP Jumped to bootloader). - */ - gpio_clear_pending_interrupt(GPIO_BOOTBLOCK_EN_L); - gpio_enable_interrupt(GPIO_BOOTBLOCK_EN_L); - - disable_sleep(SLEEP_MASK_EMMC); - CPRINTS("eMMC emulation enabled"); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, emmc_enable_spi, HOOK_PRIO_FIRST); - -static void emmc_init_spi(void) -{ - /* Enable alternate function */ - gpio_config_module(MODULE_SPI_FLASH, 1); -} -DECLARE_HOOK(HOOK_INIT, emmc_init_spi, HOOK_PRIO_INIT_SPI + 1); - -static void emmc_send_data_over_spi(uint8_t *tx, int tx_size, int rst_tx) -{ - int i; - - /* Reset TX FIFO and count monitor */ - if (rst_tx) - IT83XX_SPI_TXFCR = IT83XX_SPI_TXFR | IT83XX_SPI_TXFCMR; - /* CPU access TX FIFO1 and FIFO2 */ - IT83XX_SPI_TXRXFAR = IT83XX_SPI_CPUTFA; - - /* Write response data to TX FIFO */ - for (i = 0; i < tx_size; i += 4) - IT83XX_SPI_CPUWTFDB0 = *(uint32_t *)(tx + i); - /* - * After writing data to TX FIFO is finished, this bit will - * be to indicate the SPI slave controller. - */ - IT83XX_SPI_TXFCR = IT83XX_SPI_TXFS; - /* End CPU access TX FIFO */ - IT83XX_SPI_TXRXFAR = 0; - /* SPI module access TX FIFO */ - IT83XX_SPI_FCR = IT83XX_SPI_SPISRTXF; -} - -static void emmc_bootblock_transfer(void) -{ - int tx_size, sent = 0, remaining = sizeof(bootblock_raw_data); - uint8_t *raw = (uint8_t *)bootblock_raw_data; - const uint32_t timeout_us = 200; - uint32_t start; - - /* - * HW will transmit the data of FIFO1 or FIFO2 in turn. - * So when a FIFO is empty, we need to fill the FIFO out - * immediately. - */ - emmc_send_data_over_spi(&raw[sent], 256, 1); - sent += 256; - - while (sent < remaining) { - /* Wait for FIFO1 or FIFO2 have been transmitted */ - start = __hw_clock_source_read(); - while (!(IT83XX_SPI_TXFSR & BIT(0)) && - (__hw_clock_source_read() - start < timeout_us)) - ; - /* Abort an ongoing transfer due to a command is received. */ - if (IT83XX_SPI_ISR & IT83XX_SPI_RX_FIFO_FULL) - break; - /* fill out next 128 bytes to FIFO1 or FIFO2 */ - tx_size = (remaining - sent) < 128 ? (remaining - sent) : 128; - emmc_send_data_over_spi(&raw[sent], tx_size, 0); - sent += tx_size; - } -} - -static enum emmc_cmd emmc_parse_command(int index, uint32_t *cmd0) -{ - int32_t shift0; - uint32_t data[3]; - - data[0] = htobe32(cmd0[index]); - data[1] = htobe32(cmd0[index+1]); - data[2] = htobe32(cmd0[index+2]); - - if ((data[0] & 0xff000000) != 0x40000000) { - /* Figure out alignment (cmd starts with 01) */ - /* Number of leading ones. */ - shift0 = __builtin_clz(~data[0]); - - data[0] = (data[0] << shift0) | (data[1] >> (32-shift0)); - data[1] = (data[1] << shift0) | (data[2] >> (32-shift0)); - } - - if (data[0] == 0x40000000 && data[1] == 0x0095ffff) { - /* 400000000095 GO_IDLE_STATE */ - CPRINTS("goIdle"); - return EMMC_IDLE; - } - - if (data[0] == 0x40f0f0f0 && data[1] == 0xf0fdffff) { - /* 40f0f0f0f0fd GO_PRE_IDLE_STATE */ - CPRINTS("goPreIdle"); - return EMMC_PRE_IDLE; - } - - if (data[0] == 0x40ffffff && data[1] == 0xfae5ffff) { - /* 40fffffffae5 BOOT_INITIATION */ - CPRINTS("bootInit"); - return EMMC_BOOT; - } - - CPRINTS("eMMC error"); - return EMMC_ERROR; -} - -void spi_emmc_cmd0_isr(uint32_t *cmd0_payload) -{ - enum emmc_cmd cmd; - - for (int i = 0; i < 8; i++) { - if (cmd0_payload[i] == 0xffffffff) - continue; - - cmd = emmc_parse_command(i, &cmd0_payload[i]); - - if (cmd == EMMC_IDLE || cmd == EMMC_PRE_IDLE) { - /* Abort an ongoing transfer. */ - emmc_reset_spi_tx(); - break; - } - - if (cmd == EMMC_BOOT) { - emmc_bootblock_transfer(); - break; - } - } -} diff --git a/baseboard/kukui/usb_pd_policy.c b/baseboard/kukui/usb_pd_policy.c deleted file mode 100644 index 28ef005ee8..0000000000 --- a/baseboard/kukui/usb_pd_policy.c +++ /dev/null @@ -1,298 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charge_manager.h" -#include "charge_state_v2.h" -#include "charger.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "system.h" -#include "timer.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_policy.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -static int board_get_polarity(int port) -{ - /* Krane's aux mux polarity is reversed. Workaround to flip it back. */ - if (IS_ENABLED(BOARD_KRANE) && board_get_version() == 3) - return !polarity_rm_dts(pd_get_polarity(port)); - - return polarity_rm_dts(pd_get_polarity(port)); -} - -static uint8_t vbus_en; - -#define VBUS_EN_SYSJUMP_TAG 0x5645 /* VE */ -#define VBUS_EN_HOOK_VERSION 1 - -static void vbus_en_preserve_state(void) -{ - system_add_jump_tag(VBUS_EN_SYSJUMP_TAG, VBUS_EN_HOOK_VERSION, - sizeof(vbus_en), &vbus_en); -} -DECLARE_HOOK(HOOK_SYSJUMP, vbus_en_preserve_state, HOOK_PRIO_DEFAULT); - -static void vbus_en_restore_state(void) -{ - const uint8_t *prev_vbus_en; - int size, version; - - prev_vbus_en = (const uint8_t *)system_get_jump_tag( - VBUS_EN_SYSJUMP_TAG, &version, &size); - - if (prev_vbus_en && version == VBUS_EN_HOOK_VERSION && - size == sizeof(*prev_vbus_en)) { - memcpy(&vbus_en, prev_vbus_en, sizeof(vbus_en)); - } -} -DECLARE_HOOK(HOOK_INIT, vbus_en_restore_state, HOOK_PRIO_DEFAULT); - -int board_vbus_source_enabled(int port) -{ - return vbus_en; -} - -int board_is_sourcing_vbus(int port) -{ - if (IS_ENABLED(BOARD_KUKUI) && board_get_version() <= 1) - return charger_is_sourcing_otg_power(port); - else - return board_vbus_source_enabled(port); -} - -int pd_set_power_supply_ready(int port) -{ - if (port != CHARGE_PORT_USB_C) - return EC_ERROR_INVAL; - - pd_set_vbus_discharge(port, 0); - /* Provide VBUS */ - vbus_en = 1; - -#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT - /* Ensure we advertise the proper available current quota */ - charge_manager_source_port(port, 1); -#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ - - if (IS_ENABLED(VARIANT_KUKUI_CHARGER_ISL9238)) - charge_set_output_current_limit(CHARGER_SOLO, 3300, 5000); - else - charger_enable_otg_power(CHARGER_SOLO, 1); - - gpio_set_level(GPIO_EN_USBC_CHARGE_L, 1); - gpio_set_level(GPIO_EN_PP5000_USBC, 1); - if (IS_ENABLED(CONFIG_CHARGER_OTG) && IS_ENABLED(CONFIG_CHARGER_ISL9238C)) - charger_set_current(CHARGER_SOLO, 0); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - if (port != CHARGE_PORT_USB_C) - return; - - prev_en = vbus_en; - /* Disable VBUS */ - vbus_en = 0; - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - -#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT - /* Give back the current quota we are no longer using */ - charge_manager_source_port(port, 0); -#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ - - if (IS_ENABLED(VARIANT_KUKUI_CHARGER_ISL9238)) - charge_set_output_current_limit(CHARGER_SOLO, 0, 0); - else - charger_enable_otg_power(CHARGER_SOLO, 0); - - gpio_set_level(GPIO_EN_PP5000_USBC, 0); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_check_vconn_swap(int port) -{ - /* always allow vconn swap, since PSYS sources VCONN */ - return 1; -} - -/* ----------------- Vendor Defined Messages ------------------ */ -#ifdef CONFIG_USB_PD_ALT_MODE_DFP -__overridable int board_has_virtual_mux(void) -{ - return IS_ENABLED(CONFIG_USB_MUX_VIRTUAL); -} - -static void board_usb_mux_set(int port, mux_state_t mux_mode, - enum usb_switch usb_mode, int polarity) -{ - usb_mux_set(port, mux_mode, usb_mode, polarity); - - if (!board_has_virtual_mux()) - /* b:149181702: Inform AP of DP status */ - host_set_single_event(EC_HOST_EVENT_USB_MUX); -} - -__override void svdm_safe_dp_mode(int port) -{ - /* make DP interface safe until configure */ - dp_flags[port] = 0; - dp_status[port] = 0; - board_usb_mux_set(port, USB_PD_MUX_NONE, USB_SWITCH_CONNECT, - board_get_polarity(port)); -} - -__override int svdm_enter_dp_mode(int port, uint32_t mode_caps) -{ - /* Kukui/Krane doesn't support superspeed lanes. */ - const uint32_t support_pin_mode = board_has_virtual_mux() ? - (MODE_DP_PIN_C | MODE_DP_PIN_E) : MODE_DP_PIN_ALL; - - /** - * Only enter mode if device is DFP_D (and PIN_C/E for Kukui/Krane) - * capable - */ - if ((mode_caps & MODE_DP_SNK) && - (mode_caps & ((support_pin_mode << MODE_DP_DFP_PIN_SHIFT) | - (support_pin_mode << MODE_DP_UFP_PIN_SHIFT)))) { - svdm_safe_dp_mode(port); - return 0; - } - - CPRINTS("ERR:DP mode SNK or C&E missing! 0x%x", mode_caps); - return -1; -} - -__override int svdm_dp_config(int port, uint32_t *payload) -{ - int opos = pd_alt_mode(port, TCPCI_MSG_SOP, USB_SID_DISPLAYPORT); - int status = dp_status[port]; - int mf_pref = PD_VDO_DPSTS_MF_PREF(dp_status[port]); - int pin_mode; - - /* Kukui doesn't support multi-function mode, mask it out. */ - if (board_has_virtual_mux()) - status &= ~PD_VDO_DPSTS_MF_MASK; - - pin_mode = pd_dfp_dp_get_pin_mode(port, status); - - if (!pin_mode) - return 0; - - if (board_has_virtual_mux()) - board_usb_mux_set(port, USB_PD_MUX_DP_ENABLED, - USB_SWITCH_CONNECT, board_get_polarity(port)); - else - board_usb_mux_set( - port, mf_pref ? USB_PD_MUX_DOCK : USB_PD_MUX_DP_ENABLED, - USB_SWITCH_CONNECT, board_get_polarity(port)); - - payload[0] = VDO(USB_SID_DISPLAYPORT, 1, - CMD_DP_CONFIG | VDO_OPOS(opos)); - payload[1] = VDO_DP_CFG(pin_mode, /* pin mode */ - 1, /* DPv1.3 signaling */ - 2); /* UFP connected */ - return 2; -}; - -__override void svdm_dp_post_config(int port) -{ - dp_flags[port] |= DP_FLAGS_DP_ON; - if (!(dp_flags[port] & DP_FLAGS_HPD_HI_PENDING)) - return; - - gpio_set_level(GPIO_USB_C0_HPD_OD, 1); -#ifdef VARIANT_KUKUI_DP_MUX_GPIO - board_set_dp_mux_control(1, board_get_polarity(port)); -#endif - - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; - - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - int cur_lvl = gpio_get_level(GPIO_USB_C0_HPD_OD); - int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); - int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); - mux_state_t mux_state; - - dp_status[port] = payload[1]; - - /* Its initial DP status message prior to config */ - if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { - if (lvl) - dp_flags[port] |= DP_FLAGS_HPD_HI_PENDING; - return 1; - } - - mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | - (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); - usb_mux_hpd_update(port, mux_state); - - if (irq & cur_lvl) { - uint64_t now = get_time().val; - /* wait for the minimum spacing between IRQ_HPD if needed */ - if (now < svdm_hpd_deadline[port]) - usleep(svdm_hpd_deadline[port] - now); - - /* generate IRQ_HPD pulse */ - gpio_set_level(GPIO_USB_C0_HPD_OD, 0); - usleep(HPD_DSTREAM_DEBOUNCE_IRQ); - gpio_set_level(GPIO_USB_C0_HPD_OD, 1); - -#ifdef VARIANT_KUKUI_DP_MUX_GPIO - board_set_dp_mux_control(1, board_get_polarity(port)); -#endif - - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + - HPD_USTREAM_DEBOUNCE_LVL; - } else if (irq & !lvl) { - CPRINTF("ERR:HPD:IRQ&LOW\n"); - return 0; /* nak */ - } else { - gpio_set_level(GPIO_USB_C0_HPD_OD, lvl); -#ifdef VARIANT_KUKUI_DP_MUX_GPIO - board_set_dp_mux_control(lvl, board_get_polarity(port)); -#endif - /* set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + - HPD_USTREAM_DEBOUNCE_LVL; - } - - /* ack */ - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ - gpio_set_level(GPIO_USB_C0_HPD_OD, 0); -#ifdef VARIANT_KUKUI_DP_MUX_GPIO - board_set_dp_mux_control(0, 0); -#endif - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} -#endif /* CONFIG_USB_PD_ALT_MODE_DFP */ diff --git a/baseboard/kukui/usb_pd_policy.h b/baseboard/kukui/usb_pd_policy.h deleted file mode 100644 index 78e0213f53..0000000000 --- a/baseboard/kukui/usb_pd_policy.h +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __CROS_EC_BASEBOARD_USB_PD_POLICY_H -#define __CROS_EC_BASEBOARD_USB_PD_POLICY_H - -#include "common.h" - -__override_proto int board_has_virtual_mux(void); - -#endif /* __CROS_EC_BASEBOARD_USB_PD_POLICY_H */ diff --git a/baseboard/mtscp-rv32i/baseboard.c b/baseboard/mtscp-rv32i/baseboard.c deleted file mode 100644 index a34a08f1fe..0000000000 --- a/baseboard/mtscp-rv32i/baseboard.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -/* MT SCP RV32i configuration */ - -#include "cache.h" -#include "csr.h" -#include "registers.h" - -#define SCP_SRAM_END (CONFIG_IPC_SHARED_OBJ_ADDR & (~(0x400 - 1))) - -struct mpu_entry mpu_entries[NR_MPU_ENTRIES] = { - /* SRAM (for most code, data) */ - {0, SCP_SRAM_END, MPU_ATTR_C | MPU_ATTR_W | MPU_ATTR_R}, - /* SRAM (for IPI shared buffer) */ - {SCP_SRAM_END, SCP_FW_END, MPU_ATTR_W | MPU_ATTR_R}, - /* For AP domain */ -#ifdef CHIP_VARIANT_MT8195 - {0x60000000, 0x70000000, MPU_ATTR_W | MPU_ATTR_R | MPU_ATTR_P}, -#else - {0x60000000, 0x70000000, MPU_ATTR_W | MPU_ATTR_R}, -#endif - /* For SCP sys */ - {0x70000000, 0x80000000, MPU_ATTR_W | MPU_ATTR_R}, -#ifdef CHIP_VARIANT_MT8195 - {0x10000000, 0x11400000, MPU_ATTR_C | MPU_ATTR_W | MPU_ATTR_R}, -#else - {0x10000000, 0x11400000, MPU_ATTR_W | MPU_ATTR_R}, -#endif -}; - -#include "gpio_list.h" diff --git a/baseboard/mtscp-rv32i/baseboard.h b/baseboard/mtscp-rv32i/baseboard.h deleted file mode 100644 index a8f3b522a0..0000000000 --- a/baseboard/mtscp-rv32i/baseboard.h +++ /dev/null @@ -1,61 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* MT SCP RV32i board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_HOSTCMD) | CC_MASK(CC_IPI))) - -#define CONFIG_FLASH_SIZE_BYTES CONFIG_RAM_BASE -#define CONFIG_LTO -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_UART_CONSOLE 0 - -/* IPI configs */ -#define CONFIG_IPC_SHARED_OBJ_BUF_SIZE 288 -#define CONFIG_IPC_SHARED_OBJ_ADDR \ - (SCP_FW_END - \ - (CONFIG_IPC_SHARED_OBJ_BUF_SIZE + 2 * 4 /* int32_t */) * 2) -#define CONFIG_IPI -#define CONFIG_RPMSG_NAME_SERVICE - -#define SCP_IPI_INIT 0 -#define SCP_IPI_VDEC_H264 1 -#define SCP_IPI_VDEC_VP8 2 -#define SCP_IPI_VDEC_VP9 3 -#define SCP_IPI_VENC_H264 4 -#define SCP_IPI_VENC_VP8 5 -#define SCP_IPI_MDP_INIT 6 -#define SCP_IPI_MDP_DEINIT 7 -#define SCP_IPI_MDP_FRAME 8 -#define SCP_IPI_DIP 9 -#define SCP_IPI_ISP_CMD 10 -#define SCP_IPI_ISP_FRAME 11 -#define SCP_IPI_FD_CMD 12 -#define SCP_IPI_HOST_COMMAND 13 -#define SCP_IPI_VDEC_LAT 14 -#define SCP_IPI_VDEC_CORE 15 -#define SCP_IPI_COUNT 16 - -#define IPI_COUNT SCP_IPI_COUNT - -#define SCP_IPI_NS_SERVICE 0xFF - -/* Access DRAM through cached access */ -#define CONFIG_DRAM_BASE 0x10000000 -/* Shared memory address in AP physical address space. */ -#define CONFIG_DRAM_BASE_LOAD 0x50000000 -#define CONFIG_DRAM_SIZE 0x01400000 /* 20 MB */ - -/* MPU settings */ -#define NR_MPU_ENTRIES 16 - -#ifndef __ASSEMBLER__ -#include "gpio_signal.h" -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/mtscp-rv32i/build.mk b/baseboard/mtscp-rv32i/build.mk deleted file mode 100644 index 420a3a4e08..0000000000 --- a/baseboard/mtscp-rv32i/build.mk +++ /dev/null @@ -1,12 +0,0 @@ -# -*- makefile -*- -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# -baseboard-y+=baseboard.o - -baseboard-$(HAS_TASK_VDEC_SERVICE)+=vdec.o -baseboard-$(HAS_TASK_VENC_SERVICE)+=venc.o -baseboard-$(HAS_TASK_MDP_SERVICE)+=mdp.o diff --git a/baseboard/mtscp-rv32i/mdp.c b/baseboard/mtscp-rv32i/mdp.c deleted file mode 100644 index b0756a797a..0000000000 --- a/baseboard/mtscp-rv32i/mdp.c +++ /dev/null @@ -1,81 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "console.h" -#include "ipi_chip.h" -#include "mdp.h" -#include "queue_policies.h" -#include "registers.h" -#include "task.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_IPI, format, ##args) -#define CPRINTS(format, args...) cprints(CC_IPI, format, ##args) - -static void event_mdp_written(struct consumer const *consumer, size_t count) -{ - task_wake(TASK_ID_MDP_SERVICE); -} -static struct consumer const event_mdp_consumer; -static struct queue const event_mdp_queue = QUEUE_DIRECT(4, - struct mdp_msg_service, null_producer, event_mdp_consumer); -static struct consumer const event_mdp_consumer = { - .queue = &event_mdp_queue, - .ops = &((struct consumer_ops const) { - .written = event_mdp_written, - }), -}; - -/* Stub functions only provided by private overlays. */ -#ifndef HAVE_PRIVATE_MT_SCP -void mdp_common_init(void) {} -void mdp_ipi_task_handler(void *pvParameters) {} -#endif - -static void mdp_ipi_handler(int id, void *data, unsigned int len) -{ - struct mdp_msg_service rsv_msg; - - if (!len) { - CPRINTS("len is zero."); - return; - } - - rsv_msg.id = id; - memcpy(rsv_msg.msg, data, MIN(len, sizeof(rsv_msg.msg))); - - /* - * If there is no other IPI handler touch this queue, we don't need to - * interrupt_disable() or task_disable_irq(). - */ - if (!queue_add_unit(&event_mdp_queue, &rsv_msg)) - CPRINTS("Could not send mdp id: %d to the queue.", id); -} -DECLARE_IPI(SCP_IPI_MDP_INIT, mdp_ipi_handler, 0); -DECLARE_IPI(SCP_IPI_MDP_FRAME, mdp_ipi_handler, 0); -DECLARE_IPI(SCP_IPI_MDP_DEINIT, mdp_ipi_handler, 0); - -void mdp_service_task(void *u) -{ - struct mdp_msg_service rsv_msg; - size_t size; - - mdp_common_init(); - - while (1) { - /* - * Queue unit is added in IPI handler, which is in ISR context. - * Disable IRQ to prevent a clobbered queue. - */ - ipi_disable_irq(); - size = queue_remove_unit(&event_mdp_queue, &rsv_msg); - ipi_enable_irq(); - - if (!size) - task_wait_event(-1); - else - mdp_ipi_task_handler(&rsv_msg); - } -} diff --git a/baseboard/mtscp-rv32i/mdp.h b/baseboard/mtscp-rv32i/mdp.h deleted file mode 100644 index eea3ffb289..0000000000 --- a/baseboard/mtscp-rv32i/mdp.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __CROS_EC_SCP_MDP_H -#define __CROS_EC_SCP_MDP_H - -struct mdp_msg_service { - int id; - unsigned char msg[20]; -}; -BUILD_ASSERT(member_size(struct mdp_msg_service, msg) <= - CONFIG_IPC_SHARED_OBJ_BUF_SIZE); - -/* Functions provided by private overlay. */ -void mdp_common_init(void); -void mdp_ipi_task_handler(void *pvParameters); - -#endif /* __CROS_EC_SCP_MDP_H */ diff --git a/baseboard/mtscp-rv32i/vdec.c b/baseboard/mtscp-rv32i/vdec.c deleted file mode 100644 index c3f5f5a9cf..0000000000 --- a/baseboard/mtscp-rv32i/vdec.c +++ /dev/null @@ -1,136 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "console.h" -#include "hooks.h" -#include "ipi_chip.h" -#include "queue.h" -#include "queue_policies.h" -#include "registers.h" -#include "task.h" -#include "util.h" -#include "vdec.h" - -#define CPRINTF(format, args...) cprintf(CC_IPI, format, ##args) -#define CPRINTS(format, args...) cprints(CC_IPI, format, ##args) - -static void event_vdec_written(struct consumer const *consumer, size_t count) -{ - task_wake(TASK_ID_VDEC_SERVICE); -} -static struct consumer const event_vdec_consumer; -static struct queue const event_vdec_queue = QUEUE_DIRECT(8, - struct vdec_msg, null_producer, event_vdec_consumer); -static struct consumer const event_vdec_consumer = { - .queue = &event_vdec_queue, - .ops = &((struct consumer_ops const) { - .written = event_vdec_written, - }), -}; - -static void event_vdec_core_written(struct consumer const *consumer, - size_t count) -{ - task_wake(TASK_ID_VDEC_CORE_SERVICE); -} -static struct consumer const event_vdec_core_consumer; -static struct queue const event_vdec_core_queue = QUEUE_DIRECT(8, - struct vdec_msg, null_producer, event_vdec_core_consumer); -static struct consumer const event_vdec_core_consumer = { - .queue = &event_vdec_core_queue, - .ops = &((struct consumer_ops const) { - .written = event_vdec_core_written, - }), -}; - -/* Stub functions only provided by private overlays. */ -#ifndef HAVE_PRIVATE_MT_SCP -void vdec_msg_handler(void *data) {} -void vdec_core_msg_handler(void *data) {} -#endif - -static void vdec_h264_ipi_handler(int id, void *data, uint32_t len) -{ - struct vdec_msg rsv_msg; - - if (!len) { - CPRINTS("len is zero."); - return; - } - - rsv_msg.type = VDEC_LAT; - memcpy(rsv_msg.msg, data, MIN(len, sizeof(rsv_msg.msg))); - - /* - * If there is no other IPI handler touch this queue, we don't need to - * interrupt_disable() or task_disable_irq(). - */ - if (!queue_add_unit(&event_vdec_queue, &rsv_msg)) - CPRINTS("Could not send vdec %d to the queue.", rsv_msg.type); -} -DECLARE_IPI(SCP_IPI_VDEC_LAT, vdec_h264_ipi_handler, 0); - -static void vdec_h264_ipi_core_handler(int id, void *data, uint32_t len) -{ - struct vdec_msg rsv_msg; - - if (!len) { - CPRINTS("len is zero."); - return; - } - - rsv_msg.type = VDEC_CORE; - memcpy(rsv_msg.msg, data, MIN(len, sizeof(rsv_msg.msg))); - - /* - * If there is no other IPI handler touch this queue, we don't need to - * interrupt_disable() or task_disable_irq(). - */ - if (!queue_add_unit(&event_vdec_core_queue, &rsv_msg)) - CPRINTS("Could not send vdec %d to core queue.", rsv_msg.type); -} -DECLARE_IPI(SCP_IPI_VDEC_CORE, vdec_h264_ipi_core_handler, 0); - -void vdec_service_task(void *u) -{ - struct vdec_msg rsv_msg; - size_t size; - - while (1) { - /* - * Queue unit is added in IPI handler, which is in ISR context. - * Disable IRQ to prevent a clobbered queue. - */ - ipi_disable_irq(); - size = queue_remove_unit(&event_vdec_queue, &rsv_msg); - ipi_enable_irq(); - - if (!size) - task_wait_event(-1); - else - vdec_msg_handler(rsv_msg.msg); - } -} - -void vdec_core_service_task(void *u) -{ - struct vdec_msg rsv_msg; - size_t size; - - while (1) { - /* - * Queue unit is added in IPI handler, which is in ISR context. - * Disable IRQ to prevent a clobbered queue. - */ - ipi_disable_irq(); - size = queue_remove_unit(&event_vdec_core_queue, &rsv_msg); - ipi_enable_irq(); - - if (!size) - task_wait_event(-1); - else - vdec_core_msg_handler(rsv_msg.msg); - } -} diff --git a/baseboard/mtscp-rv32i/vdec.h b/baseboard/mtscp-rv32i/vdec.h deleted file mode 100644 index cdc16ba9e0..0000000000 --- a/baseboard/mtscp-rv32i/vdec.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __CROS_EC_SCP_VDEC_H -#define __CROS_EC_SCP_VDEC_H - -#include "compile_time_macros.h" - -enum vdec_type { - VDEC_LAT, - VDEC_CORE, - VDEC_MAX, -}; - -struct vdec_msg { - enum vdec_type type; - unsigned char msg[48]; -}; -BUILD_ASSERT(member_size(struct vdec_msg, msg) <= - CONFIG_IPC_SHARED_OBJ_BUF_SIZE); - -/* Functions provided by private overlay. */ -void vdec_core_msg_handler(void *msg); -void vdec_msg_handler(void *msg); - -#endif /* __CROS_EC_SCP_VDEC_H */ diff --git a/baseboard/mtscp-rv32i/venc.c b/baseboard/mtscp-rv32i/venc.c deleted file mode 100644 index 09bb0cbd39..0000000000 --- a/baseboard/mtscp-rv32i/venc.c +++ /dev/null @@ -1,85 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "console.h" -#include "hooks.h" -#include "ipi_chip.h" -#include "queue.h" -#include "queue_policies.h" -#include "registers.h" -#include "task.h" -#include "util.h" -#include "venc.h" - -#define CPRINTF(format, args...) cprintf(CC_IPI, format, ##args) -#define CPRINTS(format, args...) cprints(CC_IPI, format, ##args) - -static void event_venc_written(struct consumer const *consumer, size_t count) -{ - task_wake(TASK_ID_VENC_SERVICE); -} -static struct consumer const event_venc_consumer; -static struct queue const event_venc_queue = QUEUE_DIRECT(8, - struct venc_msg, null_producer, event_venc_consumer); -static struct consumer const event_venc_consumer = { - .queue = &event_venc_queue, - .ops = &((struct consumer_ops const) { - .written = event_venc_written, - }), -}; - -/* Stub functions only provided by private overlays. */ -#ifndef HAVE_PRIVATE_MT_SCP -void venc_h264_msg_handler(void *data) {} -#endif - -static void venc_h264_ipi_handler(int id, void *data, uint32_t len) -{ - struct venc_msg rsv_msg; - - if (!len) { - CPRINTS("len is zero."); - return; - } - - rsv_msg.type = VENC_H264; - memcpy(rsv_msg.msg, data, MIN(len, sizeof(rsv_msg.msg))); - - /* - * If there is no other IPI handler touch this queue, we don't need to - * interrupt_disable() or task_disable_irq(). - */ - if (!queue_add_unit(&event_venc_queue, &rsv_msg)) - CPRINTS("Could not send venc %d to the queue.", rsv_msg.type); -} -DECLARE_IPI(SCP_IPI_VENC_H264, venc_h264_ipi_handler, 0); - -void venc_service_task(void *u) -{ - struct venc_msg rsv_msg; - size_t size; - - typedef void (*venc_msg_handler)(void *msg); - static venc_msg_handler mtk_venc_msg_handle[VENC_MAX] = { - [VENC_H264] = venc_h264_msg_handler, - }; - - while (1) { - /* - * Queue unit is added in IPI handler, which is in ISR context. - * Disable IRQ to prevent a clobbered queue. - */ - ipi_disable_irq(); - size = queue_remove_unit(&event_venc_queue, &rsv_msg); - ipi_enable_irq(); - - if (!size) - task_wait_event(-1); - else if (mtk_venc_msg_handle[rsv_msg.type]) - mtk_venc_msg_handle[rsv_msg.type](rsv_msg.msg); - else - CPRINTS("venc handler %d not exists.", rsv_msg.type); - } -} diff --git a/baseboard/mtscp-rv32i/venc.h b/baseboard/mtscp-rv32i/venc.h deleted file mode 100644 index 47454c4507..0000000000 --- a/baseboard/mtscp-rv32i/venc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __CROS_EC_SCP_VENC_H -#define __CROS_EC_SCP_VENC_H - -#include "compile_time_macros.h" - -enum venc_type { - VENC_H264, - VENC_MAX, -}; - -struct venc_msg { - enum venc_type type; - unsigned char msg[288]; -}; -BUILD_ASSERT(member_size(struct venc_msg, msg) <= - CONFIG_IPC_SHARED_OBJ_BUF_SIZE); - -/* Functions provided by private overlay. */ -void venc_h264_msg_handler(void *data); - -#endif /* __CROS_EC_SCP_VENC_H */ diff --git a/baseboard/nucleo-f412zg/base-board.c b/baseboard/nucleo-f412zg/base-board.c deleted file mode 100644 index 15e46f006e..0000000000 --- a/baseboard/nucleo-f412zg/base-board.c +++ /dev/null @@ -1,11 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "gpio.h" - -__overridable void button_event(enum gpio_signal signal) -{ -} diff --git a/baseboard/nucleo-f412zg/base-board.h b/baseboard/nucleo-f412zg/base-board.h deleted file mode 100644 index d41cdfd207..0000000000 --- a/baseboard/nucleo-f412zg/base-board.h +++ /dev/null @@ -1,198 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nucleo-F412ZG baseboard configuration */ - -#ifndef __CROS_EC_BASE_BOARD_H -#define __CROS_EC_BASE_BOARD_H - -/*-------------------------------------------------------------------------* - * Flash layout: - * - * +++++++++++++ - * | RO | - * | ......... | - * | Rollback | (two sectors) - * +-----------+ - * | RW | - * | | - * | | - * | | - * | | - * +++++++++++++ - * - * We adjust the following macros to accommodate a for a rollback, RO, - * and RW region of different sizes. - * - *-------------------------------------------------------------------------*/ - -#undef _IMAGE_SIZE -#undef CONFIG_ROLLBACK_OFF -#undef CONFIG_ROLLBACK_SIZE -#undef CONFIG_FLASH_PSTATE -#undef CONFIG_FW_PSTATE_SIZE -#undef CONFIG_FW_PSTATE_OFF -#undef CONFIG_SHAREDLIB_SIZE -#undef CONFIG_RO_MEM_OFF -#undef CONFIG_RO_STORAGE_OFF -#undef CONFIG_RO_SIZE -#undef CONFIG_RW_MEM_OFF -#undef CONFIG_RW_STORAGE_OFF -#undef CONFIG_RW_SIZE -#undef CONFIG_EC_PROTECTED_STORAGE_OFF -#undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_OFF -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#undef CONFIG_WP_STORAGE_OFF -#undef CONFIG_WP_STORAGE_SIZE - -#define CONFIG_FLASH_WRITE_SIZE STM32_FLASH_WRITE_SIZE_3300 - -#define CONFIG_SHAREDLIB_SIZE 0 - -#define CONFIG_RO_MEM_OFF 0 -#define CONFIG_RO_STORAGE_OFF 0 -#define CONFIG_RO_SIZE (128 * 1024) - -/* EC rollback protection block */ -#define CONFIG_ROLLBACK_OFF (CONFIG_RO_MEM_OFF + CONFIG_RO_SIZE) -#define CONFIG_ROLLBACK_SIZE (128 * 1024 * 2) /* 2 blocks of 128KB each */ - -#define CONFIG_RW_MEM_OFF (CONFIG_ROLLBACK_OFF + CONFIG_ROLLBACK_SIZE) -#define CONFIG_RW_STORAGE_OFF 0 -#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES - \ - (CONFIG_RW_MEM_OFF - CONFIG_RO_MEM_OFF)) - -#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE - -#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF -#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE - -/* - * We want to prevent flash readout, and use it as indicator of protection - * status. - */ -#define CONFIG_FLASH_READOUT_PROTECTION_AS_PSTATE - -/*-------------------------------------------------------------------------* - * UART Console Setup - *-------------------------------------------------------------------------*/ - -/* The UART console is on USART3 */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 3 -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 2048 -#define CONFIG_UART_TX_REQ_CH 4 -#define CONFIG_UART_RX_REQ_CH 4 -/* We don't currently use DMA. */ -#define CONFIG_UART_TX_DMA_PH DMAMUX1_REQ_USART3_TX -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA - -/*-------------------------------------------------------------------------* - * Console Commands - *-------------------------------------------------------------------------*/ - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IDLE_STATS - -/*-------------------------------------------------------------------------* - * Rollback Block - *-------------------------------------------------------------------------*/ - -#define CONFIG_ROLLBACK -#define CONFIG_MPU -#define CONFIG_ROLLBACK_MPU_PROTECT - -/* - * We do not use any "locally" generated entropy: this is normally used - * to add local entropy when the main source of entropy is remote. - */ -#undef CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE -#ifdef SECTION_IS_RW - #undef CONFIG_ROLLBACK_UPDATE -#endif - -/*-------------------------------------------------------------------------* - * RW Signature Verification - *-------------------------------------------------------------------------*/ - -#ifdef SECTION_IS_RO - /* RO verifies the RW partition signature */ - #define CONFIG_RSA - #define CONFIG_RWSIG -#endif /* SECTION_IS_RO */ -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 -#define CONFIG_RWSIG_TYPE_RWSIG - -/*-------------------------------------------------------------------------* - * Watchdog - *-------------------------------------------------------------------------*/ - -/* - * RW does slow compute, RO does slow flash erase. - */ -#undef CONFIG_WATCHDOG_PERIOD_MS -#define CONFIG_WATCHDOG_PERIOD_MS 10000 -#define CONFIG_WATCHDOG_HELP - -/*-------------------------------------------------------------------------* - * Disable Features - *-------------------------------------------------------------------------*/ - -#undef CONFIG_ADC -#undef CONFIG_HIBERNATE -#undef CONFIG_I2C -#undef CONFIG_LID_SWITCH -#undef CONFIG_TASK_PROFILING - -/*-------------------------------------------------------------------------* - * Other - *-------------------------------------------------------------------------*/ - -#define CONFIG_AES -#define CONFIG_AES_GCM -#define CONFIG_DMA -#define CONFIG_FPU -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_PRINTF_LEGACY_LI_FORMAT -#define CONFIG_RNG -#define CONFIG_SHA256 -#define CONFIG_SHA256_UNROLLED -#define CONFIG_STM_HWTIMER32 -#define CONFIG_WP_ACTIVE_HIGH - -#ifndef TEST_BUILD - /* TODO(hesling): Fix the illogical dependency between spi.c - * and host_command.c - * - * Currently, the chip/stm32/spi.c depends on functions defined in - * common/host_command.c. When unit test builds use their own tasklist - * without the HOSTCMD task, host_command.c is excluded from the build, - * but chip/stm32/spi.c remains (because of CONFIG_SPI). - * This triggers an undefined reference linker error. - * The reproduce case: - * - Allow CONFIG_SPI in TEST_BUILDs - * - make BOARD=nucleo-h743zi tests - */ - #define CONFIG_SPI -#endif - -#ifndef __ASSEMBLER__ - /* Timer selection */ - #define TIM_CLOCK32 2 - #define TIM_WATCHDOG 16 - #include "gpio_signal.h" - void button_event(enum gpio_signal signal); -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASE_BOARD_H */ diff --git a/baseboard/nucleo-f412zg/base-gpio.inc b/baseboard/nucleo-f412zg/base-gpio.inc deleted file mode 100644 index 4ebd99f91f..0000000000 --- a/baseboard/nucleo-f412zg/base-gpio.inc +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Note that these pins map to the Nucleo-F412ZG. - */ - -/* Inputs and Interrupts */ -GPIO_INT(SPI1_NSS, PIN(A, 4), GPIO_INPUT, spi_event) -GPIO_INT(BTN1, PIN(C, 13), GPIO_INT_BOTH, button_event) -GPIO(WP, PIN(B, 8), GPIO_INPUT) /* Not same as bloonchipper */ - -/* Outputs */ -GPIO(EC_INT_L, PIN(A, 1), GPIO_OUT_HIGH) -GPIO(LED1, PIN(B, 0), GPIO_OUT_LOW) /* Green */ -GPIO(LED2, PIN(B, 7), GPIO_OUT_LOW) /* Blue */ -GPIO(LED3, PIN(B, 14), GPIO_OUT_LOW) /* Red */ - -UNIMPLEMENTED(ENTERING_RW) - -/* USART3: PD8/PD9 (TX/RX) */ -ALTERNATE(PIN_MASK(D, 0x0300), GPIO_ALT_USART, MODULE_UART, GPIO_PULL_UP) -/* SPI1 slave from the AP: PA4/5/6/7 (CS/CLK/MISO/MOSI) */ -ALTERNATE(PIN_MASK(A, 0x00f0), GPIO_ALT_SPI, MODULE_SPI, 0) diff --git a/baseboard/nucleo-f412zg/build.mk b/baseboard/nucleo-f412zg/build.mk deleted file mode 100644 index 1456331fec..0000000000 --- a/baseboard/nucleo-f412zg/build.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Nucleo-F412ZG baseboard specific files build -# - -# the IC is STmicro STM32F412 -CHIP:=stm32 -CHIP_FAMILY:=stm32f4 -CHIP_VARIANT:=stm32f412 - -baseboard-y=base-board.o diff --git a/baseboard/nucleo-f412zg/openocd-flash.cfg b/baseboard/nucleo-f412zg/openocd-flash.cfg deleted file mode 100644 index 3333d1163a..0000000000 --- a/baseboard/nucleo-f412zg/openocd-flash.cfg +++ /dev/null @@ -1,14 +0,0 @@ -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -source [find board/st_nucleo_f4.cfg] - -gdb_port 0 -tcl_port 0 -telnet_port 0 -init -reset halt -flash write_image erase $BUILD_DIR/ec.bin 0x08000000 -reset -shutdown diff --git a/baseboard/nucleo-f412zg/openocd.cfg b/baseboard/nucleo-f412zg/openocd.cfg deleted file mode 100644 index 589d4400f4..0000000000 --- a/baseboard/nucleo-f412zg/openocd.cfg +++ /dev/null @@ -1,9 +0,0 @@ -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -source [find board/st_nucleo_f4.cfg] - -# Enabled EC task context support -# This is supported by the upstream OpenOCD -$_TARGETNAME configure -rtos Chromium-EC diff --git a/baseboard/nucleo-h743zi/base-board.c b/baseboard/nucleo-h743zi/base-board.c deleted file mode 100644 index 15e46f006e..0000000000 --- a/baseboard/nucleo-h743zi/base-board.c +++ /dev/null @@ -1,11 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "gpio.h" - -__overridable void button_event(enum gpio_signal signal) -{ -} diff --git a/baseboard/nucleo-h743zi/base-board.h b/baseboard/nucleo-h743zi/base-board.h deleted file mode 100644 index df5e4bfa8c..0000000000 --- a/baseboard/nucleo-h743zi/base-board.h +++ /dev/null @@ -1,179 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Nucleo-H743ZI baseboard configuration */ - -#ifndef __CROS_EC_BASE_BOARD_H -#define __CROS_EC_BASE_BOARD_H - -/* - * Flash layout: - * - * +++++++++++++ - * | RO | Bank 1 - * | | - * | | - * | ......... | - * | Rollback | (last two sectors) - * +-----------+ - * | RW | Bank 2 - * | | - * | | - * | | - * | | - * +++++++++++++ - * - * We adjust the following macros to accommodate a rollback region - * and RO/RW regions of different sizes. - */ - -#undef _IMAGE_SIZE -#undef CONFIG_ROLLBACK_OFF -#undef CONFIG_ROLLBACK_SIZE -#undef CONFIG_FLASH_PSTATE -#undef CONFIG_FW_PSTATE_SIZE -#undef CONFIG_FW_PSTATE_OFF -#undef CONFIG_RO_MEM_OFF -#undef CONFIG_RO_STORAGE_OFF -#undef CONFIG_RO_SIZE -#undef CONFIG_RW_MEM_OFF -#undef CONFIG_RW_STORAGE_OFF -#undef CONFIG_RW_SIZE -#undef CONFIG_EC_PROTECTED_STORAGE_OFF -#undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#undef CONFIG_EC_WRITABLE_STORAGE_OFF -#undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#undef CONFIG_WP_STORAGE_OFF -#undef CONFIG_WP_STORAGE_SIZE - -/* - * EC rollback protection block - * - * We need 2 independently erasable blocks, at a minimum. - */ -#define CONFIG_ROLLBACK_SIZE (2 * CONFIG_FLASH_BANK_SIZE) -#define CONFIG_ROLLBACK_OFF ((CONFIG_FLASH_SIZE_BYTES / 2) - \ - CONFIG_ROLLBACK_SIZE) - -#define CONFIG_RO_MEM_OFF 0 -#define CONFIG_RO_SIZE CONFIG_ROLLBACK_OFF -#define CONFIG_RW_MEM_OFF (CONFIG_FLASH_SIZE_BYTES / 2) -#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES / 2) - -#define CONFIG_RO_STORAGE_OFF 0 -#define CONFIG_RW_STORAGE_OFF 0 - -#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE - -#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF -#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE - -/* Disabled features */ - -#undef CONFIG_ADC -#undef CONFIG_HIBERNATE -#undef CONFIG_I2C -#undef CONFIG_LID_SWITCH -#undef CONFIG_TASK_PROFILING - -/* Enabled features */ - -#define CONFIG_AES -#define CONFIG_AES_GCM -#define CONFIG_DMA -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_FPU -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_PRINTF_LEGACY_LI_FORMAT -#define CONFIG_RNG -#define CONFIG_RWSIG_TYPE_RWSIG -#define CONFIG_SHA256 -#define CONFIG_SHA256_UNROLLED -#undef CONFIG_SHAREDLIB_SIZE -#define CONFIG_SHAREDLIB_SIZE 0 -#define CONFIG_STM_HWTIMER32 -#define CONFIG_WATCHDOG_HELP -#define CONFIG_WP_ACTIVE_HIGH - -#ifndef TEST_BUILD - /* TODO(hesling): Fix the illogical dependency between spi.c - * and host_command.c - * - * Currently, the chip/stm32/spi.c depends on functions defined in - * common/host_command.c. When unit test builds use their own tasklist - * without the HOSTCMD task, host_command.c is excluded from the build, - * but chip/stm32/spi.c remains (because of CONFIG_SPI). - * This triggers an undefined reference linker error. - * The reproduce case: - * - Allow CONFIG_SPI in TEST_BUILDs - * - make BOARD=nucleo-h743zi tests - */ -# define CONFIG_SPI -#endif - -/* - * We want to prevent flash readout, and use it as indicator of protection - * status. - */ -#define CONFIG_FLASH_READOUT_PROTECTION_AS_PSTATE - -/* - * RW does slow compute, RO does slow flash erase. - */ -#undef CONFIG_WATCHDOG_PERIOD_MS -#define CONFIG_WATCHDOG_PERIOD_MS 10000 - -/* Setup UART console */ - -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 3 /* The UART console is on USART3 */ -#define CONFIG_UART_TX_DMA -#define CONFIG_UART_TX_DMA_PH DMAMUX1_REQ_USART3_TX -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 2048 - -/* Console commands */ - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IDLE_STATS - -#ifdef SECTION_IS_RO - /* RO verifies the RW partition signature */ -# define CONFIG_RSA -# define CONFIG_RWSIG -#endif /* SECTION_IS_RO */ - -#define CONFIG_RSA_KEY_SIZE 3072 -#define CONFIG_RSA_EXPONENT_3 - -/* - * We do not use any "locally" generated entropy: this is normally used - * to add local entropy when the main source of entropy is remote. - */ -#undef CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE -#ifdef SECTION_IS_RW -# undef CONFIG_ROLLBACK_UPDATE -#endif -/* - * Add rollback protection - */ -#define CONFIG_ROLLBACK -#define CONFIG_ROLLBACK_MPU_PROTECT - -#ifndef __ASSEMBLER__ - /* Timer selection */ -# define TIM_CLOCK32 2 -# define TIM_WATCHDOG 16 -# include "gpio_signal.h" - void button_event(enum gpio_signal signal); -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASE_BOARD_H */ diff --git a/baseboard/nucleo-h743zi/base-ec.tasklist b/baseboard/nucleo-h743zi/base-ec.tasklist deleted file mode 100644 index fae8952113..0000000000 --- a/baseboard/nucleo-h743zi/base-ec.tasklist +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/** - * See CONFIG_TASK_LIST in config.h for details. - */ -#define BASEBOARD_CONFIG_TASK_LIST \ - TASK_ALWAYS_RO(RWSIG, rwsig_task, NULL, 1280) \ - TASK_ALWAYS(HOOKS, hook_task, NULL, 1024) \ - TASK_NOTEST(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \ - TASK_ALWAYS(CONSOLE, console_task, NULL, CONSOLE_TASK_STACK_SIZE) diff --git a/baseboard/nucleo-h743zi/base-gpio.inc b/baseboard/nucleo-h743zi/base-gpio.inc deleted file mode 100644 index ef224cbaf1..0000000000 --- a/baseboard/nucleo-h743zi/base-gpio.inc +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Note that these pins map to the Nucleo-H743ZI V2 and are only slightly - * compatible with the original version. - * - * The V2 is denoted by "Nucleo-H743ZI2" vs. "Nucleo-H743ZI". - */ - -/* Inputs ands Interrupts */ -GPIO_INT(SPI1_NSS, PIN(A, 4), GPIO_INPUT, spi_event) -GPIO_INT(BTN1, PIN(C, 13), GPIO_INT_BOTH, button_event) -GPIO(WP, PIN(B, 7), GPIO_INPUT) - -/* Outputs */ -GPIO(EC_INT_L, PIN(A, 1), GPIO_OUT_HIGH) -GPIO(LED1, PIN(B, 0), GPIO_OUT_LOW) /* Green */ -GPIO(LED2, PIN(E, 1), GPIO_OUT_LOW) /* Yellow */ -GPIO(LED3, PIN(B, 14), GPIO_OUT_LOW) /* Red */ - -UNIMPLEMENTED(ENTERING_RW) - -/* USART3: PD8/PD9 */ -ALTERNATE(PIN_MASK(D, 0x0300), GPIO_ALT_USART, MODULE_UART, GPIO_PULL_UP) -/* SPI1 slave from the AP: PA4/5/6/7 */ -ALTERNATE(PIN_MASK(A, 0x00f0), GPIO_ALT_SPI, MODULE_SPI, 0) diff --git a/baseboard/nucleo-h743zi/build.mk b/baseboard/nucleo-h743zi/build.mk deleted file mode 100644 index e9f9ae3faa..0000000000 --- a/baseboard/nucleo-h743zi/build.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Nucleo-H743ZI baseboard specific files build -# - -# the IC is STmicro STM32H743 -CHIP:=stm32 -CHIP_FAMILY:=stm32h7 -CHIP_VARIANT:=stm32h7x3 - -baseboard-y=base-board.o
\ No newline at end of file diff --git a/baseboard/nucleo-h743zi/openocd-flash.cfg b/baseboard/nucleo-h743zi/openocd-flash.cfg deleted file mode 100644 index 4517266d7b..0000000000 --- a/baseboard/nucleo-h743zi/openocd-flash.cfg +++ /dev/null @@ -1,14 +0,0 @@ -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -source [find board/st_nucleo_h743zi.cfg] - -gdb_port 0 -tcl_port 0 -telnet_port 0 -init -reset halt -flash write_image erase $BUILD_DIR/ec.bin 0x08000000 -reset -shutdown diff --git a/baseboard/nucleo-h743zi/openocd.cfg b/baseboard/nucleo-h743zi/openocd.cfg deleted file mode 100644 index 528e8d6cab..0000000000 --- a/baseboard/nucleo-h743zi/openocd.cfg +++ /dev/null @@ -1,9 +0,0 @@ -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -source [find board/st_nucleo_h743zi.cfg] - -# Enabled EC task context support -# This is supported by the upstream OpenOCD -$_TARGETNAME configure -rtos Chromium-EC diff --git a/baseboard/octopus/baseboard.c b/baseboard/octopus/baseboard.c deleted file mode 100644 index 4f338ab131..0000000000 --- a/baseboard/octopus/baseboard.c +++ /dev/null @@ -1,384 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Octopus family-specific configuration */ - -#include "charge_manager.h" -#include "charge_state.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/bc12/max14637.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/nx20p348x.h" -#include "gpio.h" -#include "hooks.h" -#ifdef VARIANT_OCTOPUS_EC_ITE8320 -#include "intc.h" -#endif -#include "keyboard_scan.h" -#include "power.h" -#include "system.h" -#include "task.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -/******************************************************************************/ -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* - * F3 key scan cycle completed but scan input is not - * charging to logic high when EC start scan next - * column for "T" key, so we set .output_settle_us - * to 80us from 50us. - */ - .output_settle_us = 80, - .debounce_down_us = 9 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 3 * MSEC, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = 100 * MSEC, - .actual_key_mask = { -#ifndef CONFIG_KEYBOARD_KEYPAD - 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ -#else - 0x1c, 0xfe, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfe, 0xff, 0xff, 0xff, /* full set */ -#endif - }, -}; - -/******************************************************************************/ -/* USB-A Configuration */ -const int usb_port_enable[USB_PORT_COUNT] = { - GPIO_EN_USB_A0_5V, - GPIO_EN_USB_A1_5V, -}; - -/******************************************************************************/ -/* BC 1.2 chip Configuration */ -const struct max14637_config_t max14637_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - { - .chip_enable_pin = GPIO_USB_C0_BC12_VBUS_ON, - .chg_det_pin = GPIO_USB_C0_BC12_CHG_DET_L, - .flags = MAX14637_FLAGS_CHG_DET_ACTIVE_LOW, - }, - { - .chip_enable_pin = GPIO_USB_C1_BC12_VBUS_ON, - .chg_det_pin = GPIO_USB_C1_BC12_CHG_DET_L, - .flags = MAX14637_FLAGS_CHG_DET_ACTIVE_LOW, - }, -}; - -/******************************************************************************/ -/* Charger Chip Configuration */ -#ifdef VARIANT_OCTOPUS_CHARGER_ISL9238 -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; -#endif - -/******************************************************************************/ -/* Chipset callbacks/hooks */ - -/* Called by APL power state machine when transitioning from G3 to S5 */ -void chipset_pre_init_callback(void) -{ -#ifdef IT83XX_ESPI_INHIBIT_CS_BY_PAD_DISABLED - /* - * Since we disable eSPI module for IT8320 part when system goes into G3 - * state, so we need to enable it at system startup. - */ - espi_enable_pad(1); -#endif - - /* Enable 5.0V and 3.3V rails, and wait for Power Good */ - power_5v_enable(task_get_current(), 1); - - gpio_set_level(GPIO_EN_PP3300, 1); - while (!gpio_get_level(GPIO_PP5000_PG) || - !gpio_get_level(GPIO_PP3300_PG)) - ; - - /* Enable PMIC */ - gpio_set_level(GPIO_PMIC_EN, 1); -} - -/* Called on AP S5 -> S3 transition */ -static void baseboard_chipset_startup(void) -{ - /* Enable Trackpad in S3+, so it can be an AP wake source. */ - gpio_set_level(GPIO_EN_P3300_TRACKPAD_ODL, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, baseboard_chipset_startup, - HOOK_PRIO_DEFAULT); - -/* Called on AP S3 -> S0 transition */ -static void baseboard_chipset_resume(void) -{ - /* - * GPIO_ENABLE_BACKLIGHT is AND'ed with SOC_EDP_BKLTEN from the SoC and - * LID_OPEN connection in hardware. - */ - gpio_set_level(GPIO_ENABLE_BACKLIGHT, 1); - /* Enable the keyboard backlight */ - gpio_set_level(GPIO_KB_BL_PWR_EN, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, baseboard_chipset_resume, HOOK_PRIO_DEFAULT); - -/* Called on AP S0 -> S3 transition */ -static void baseboard_chipset_suspend(void) -{ - /* - * GPIO_ENABLE_BACKLIGHT is AND'ed with SOC_EDP_BKLTEN from the SoC and - * LID_OPEN connection in hardware. - */ - gpio_set_level(GPIO_ENABLE_BACKLIGHT, 0); - /* Disable the keyboard backlight */ - gpio_set_level(GPIO_KB_BL_PWR_EN, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, baseboard_chipset_suspend, - HOOK_PRIO_DEFAULT); - -/* Called on AP S3 -> S5 transition */ -static void baseboard_chipset_shutdown(void) -{ - /* Disable Trackpad in S5- to save power; not a low power wake source */ - gpio_set_level(GPIO_EN_P3300_TRACKPAD_ODL, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, baseboard_chipset_shutdown, - HOOK_PRIO_DEFAULT); - -/* Called by APL power state machine when transitioning to G3. */ -void chipset_do_shutdown(void) -{ -#ifdef VARIANT_OCTOPUS_EC_ITE8320 - /* - * We want the processor to be reset before dropping the PP3300_A rail - * below, otherwise the PP3300_LDO and PP3300_EC rails can be overloaded - */ - if (gpio_get_level(GPIO_PCH_SLP_S4_L)) { - /* assert RSMRST to PCH */ - gpio_set_level(GPIO_PCH_RSMRST_L, 0); - /* Wait SLP_S4 goes low; would rather watchdog than continue */ - while (gpio_get_level(GPIO_PCH_SLP_S4_L)) - ; - } -#endif - - /* Disable PMIC */ - gpio_set_level(GPIO_PMIC_EN, 0); - - /* Disable 5.0V and 3.3V rails, and wait until they power down. */ - power_5v_enable(task_get_current(), 0); - - /* - * Shutdown the 3.3V rail and wait for it to go down. We cannot wait - * for the 5V rail since other tasks may be using it. - */ - gpio_set_level(GPIO_EN_PP3300, 0); - while (gpio_get_level(GPIO_PP3300_PG)) - ; - -#ifdef IT83XX_ESPI_INHIBIT_CS_BY_PAD_DISABLED - /* - * The IT8320 part doesn't go into its lowest power state in idle task - * when the eSPI module is on and CS# is asserted, so we need to - * manually disable it. - */ - espi_enable_pad(0); -#endif -} - -int board_is_i2c_port_powered(int port) -{ - if (port != I2C_PORT_SENSOR) - return 1; - - /* Sensor rails are off in S5/G3 */ - return chipset_in_state(CHIPSET_STATE_ANY_OFF) ? 0 : 1; -} - -/******************************************************************************/ -/* Power Delivery and charing functions */ - -#ifdef CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT -enum adc_channel board_get_vbus_adc(int port) -{ - if (port == 0) - return ADC_VBUS_C0; - if (port == 1) - return ADC_VBUS_C1; - CPRINTSUSB("Unknown vbus adc port id: %d", port); - return ADC_VBUS_C0; -} -#endif /* CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT */ - -void baseboard_tcpc_init(void) -{ - /* Only reset TCPC if not sysjump */ - if (!system_jumped_late()) - board_reset_pd_mcu(); - - /* - * Initialize HPD to low; after sysjump SOC needs to see - * HPD pulse to enable video path - */ - for (int port = 0; port < board_get_usb_pd_port_count(); ++port) - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); -} -/* Called after the cbi_init (via +2) */ -DECLARE_HOOK(HOOK_INIT, baseboard_tcpc_init, HOOK_PRIO_INIT_I2C + 2); - -int board_set_active_charge_port(int port) -{ - int is_valid_port = (port >= 0 && - port < board_get_usb_pd_port_count()); - int i; - - if (!is_valid_port && port != CHARGE_PORT_NONE) - return EC_ERROR_INVAL; - - - if (port == CHARGE_PORT_NONE) { - CPRINTSUSB("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; (i < ppc_cnt) && - (i < board_get_usb_pd_port_count()); i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTFUSB("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTSUSB("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; (i < ppc_cnt) && - (i < board_get_usb_pd_port_count()); i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTSUSB("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - /* - * Empirically, the charger seems to draw a little more current that - * it is set to, so we reduce our limit by 5%. - */ -#if defined(CONFIG_CHARGER_BQ25710) || defined(CONFIG_CHARGER_ISL9238) - charge_ma = (charge_ma * 95) / 100; -#endif - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} - -void board_hibernate(void) -{ - int port; - - /* - * To support hibernate called from console commands, ectool commands - * and key sequence, shutdown the AP before hibernating. - * - * If board_hibernate() is called from within chipset task, then - * chipset_do_shutdown needs to be called directly since - * chipset_force_shutdown basically just sets wake event for chipset - * task. But that will not help since chipset task is in board_hibernate - * and never returns back to the power state machine to take down power - * rails. - */ -#ifdef HAS_TASK_CHIPSET - if (task_get_current() == TASK_ID_CHIPSET) - chipset_do_shutdown(); - else -#endif - chipset_force_shutdown(CHIPSET_SHUTDOWN_BOARD_CUSTOM); - -#ifdef CONFIG_USBC_PPC_NX20P3483 - /* - * If we are charging, then drop the Vbus level down to 5V to ensure - * that we don't get locked out of the 6.8V OVLO for our PPCs in - * dead-battery mode. This is needed when the TCPC/PPC rails go away. - * (b/79218851) - */ - port = charge_manager_get_active_charge_port(); - if (port != CHARGE_PORT_NONE) - pd_request_source_voltage(port, NX20P348X_SAFE_RESET_VBUS_MV); -#endif - - /* - * If Vbus isn't already on this port, then we need to put the PPC into - * low power mode or open the SNK FET based on which signals wake up - * the EC from hibernate. - */ - for (port = 0; port < board_get_usb_pd_port_count(); port++) { - if (!pd_is_vbus_present(port)) { -#ifdef VARIANT_OCTOPUS_EC_ITE8320 - /* - * ITE variant uses the PPC interrupts instead of - * AC_PRESENT to wake up, so we do not need to enable - * the SNK FETS. - */ - ppc_enter_low_power_mode(port); -#else - /* - * Open the SNK path to allow AC to pass through to the - * charger when connected. This is need if the TCPC/PPC - * rails do not go away and AC_PRESENT wakes up the EC - * (b/79173959). - */ - ppc_vbus_sink_enable(port, 1); -#endif - } - } - - /* - * Delay allows AP power state machine to settle down along - * with any PD contract renegotiation, and tcpm to put TCPC into low - * power mode if required. - */ - msleep(1500); -} diff --git a/baseboard/octopus/baseboard.h b/baseboard/octopus/baseboard.h deleted file mode 100644 index 8b05c30f4c..0000000000 --- a/baseboard/octopus/baseboard.h +++ /dev/null @@ -1,322 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Octopus board configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/******************************************************************************* - * EC Config - */ - -/* - * By default, enable all console messages excepted HC, ACPI and event: - * The sensor stack is generating a lot of activity. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) - -/* - * Variant EC defines. Pick one: - * VARIANT_OCTOPUS_EC_NPCX796FB - * VARIANT_OCTOPUS_EC_ITE8320 - */ -#if defined(VARIANT_OCTOPUS_EC_NPCX796FB) - /* NPCX7 config */ - #define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ - #define NPCX_TACH_SEL2 0 /* [0:GPIO40/73, 1:GPIO93/A6] as TACH */ - #define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ - - /* Internal SPI flash on NPCX7 */ - /* Flash is 1MB but reserve half for future use. */ - #define CONFIG_FLASH_SIZE_BYTES (512 * 1024) - - #define CONFIG_SPI_FLASH_REGS - #define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - - /* I2C Bus Configuration */ - #define I2C_PORT_BATTERY NPCX_I2C_PORT0_0 - #define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 - #define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 - #define I2C_PORT_EEPROM NPCX_I2C_PORT3_0 - #define I2C_PORT_CHARGER NPCX_I2C_PORT4_1 - #define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 - #define I2C_ADDR_EEPROM_FLAGS 0x50 - - /* Enable PSL hibernate mode. */ - #define CONFIG_HIBERNATE_PSL - - /* EC variant determines USB-C variant */ - #define VARIANT_OCTOPUS_USBC_STANDALONE_TCPCS - - /* Allow the EC to enter deep sleep in S0 */ - #define CONFIG_LOW_POWER_S0 -#elif defined(VARIANT_OCTOPUS_EC_ITE8320) - /* IT83XX config */ - #define CONFIG_IT83XX_VCC_1P8V - /* I2C Bus Configuration */ - #define I2C_PORT_BATTERY IT83XX_I2C_CH_A /* Shared bus */ - #define I2C_PORT_CHARGER IT83XX_I2C_CH_A /* Shared bus */ - #define I2C_PORT_SENSOR IT83XX_I2C_CH_B - #define I2C_PORT_USBC0 IT83XX_I2C_CH_C - #define I2C_PORT_USBC1 IT83XX_I2C_CH_E - #define I2C_PORT_USB_MUX I2C_PORT_USBC0 /* For MUX driver */ - #define I2C_PORT_EEPROM IT83XX_I2C_CH_F - #define I2C_ADDR_EEPROM_FLAGS 0x50 - #define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2 - - /* EC variant determines USB-C variant */ - #define VARIANT_OCTOPUS_USBC_ITE_EC_TCPCS -#else - #error Must define a VARIANT_OCTOPUS_EC -#endif /* VARIANT_OCTOPUS_EC */ - -/* Common EC defines */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_BUS_MAY_BE_UNPOWERED -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#define CONFIG_CRC8 -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_DPTF -#define CONFIG_DO_NOT_INCLUDE_RV32I_PANIC_DATA -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_LED_ONOFF_STATES -#define CONFIG_CMD_CHARGEN - -/* Port80 -- allow larger buffer for port80 messages */ -#undef CONFIG_PORT80_HISTORY_LEN -#define CONFIG_PORT80_HISTORY_LEN 256 - -/* - * We don't need CONFIG_BACKLIGHT_LID since hardware AND's LID_OPEN and AP - * signals with EC backlight enable signal. - */ - -/******************************************************************************* - * Battery/Charger/Power Config - */ - -/* - * Variant charger defines. Pick one: - * VARIANT_OCTOPUS_CHARGER_ISL9238 - * VARIANT_OCTOPUS_CHARGER_BQ25703 - */ -#if defined(VARIANT_OCTOPUS_CHARGER_ISL9238) - #define CONFIG_CHARGER_ISL9238 - #define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 - /* - * ISL923x driver sets "Adapter insertion to Switching Debounce" - * CONTROL2 REG 0x3DH <Bit 11> to 1 which is 150 ms - */ - #undef CONFIG_EXTPOWER_DEBOUNCE_MS - #define CONFIG_EXTPOWER_DEBOUNCE_MS 200 -#elif defined(VARIANT_OCTOPUS_CHARGER_BQ25703) - #define CONFIG_CHARGER_BQ25703 - #define CONFIG_CHARGER_SENSE_RESISTOR_AC 10 - /* - * From BQ25703: CHRG_OK is HIGH after 50ms deglitch time. - */ - #undef CONFIG_EXTPOWER_DEBOUNCE_MS - #define CONFIG_EXTPOWER_DEBOUNCE_MS 50 -#elif defined(CONFIG_CHARGER_RUNTIME_CONFIG) - #define CONFIG_CHARGER_ISL9238 - #define CONFIG_CHARGER_BQ25710 - #define CONFIG_CHARGER_SENSE_RESISTOR_AC_ISL9238 20 - #define CONFIG_CHARGER_SENSE_RESISTOR_AC_BQ25710 10 - - #undef CONFIG_EXTPOWER_DEBOUNCE_MS - #define CONFIG_EXTPOWER_DEBOUNCE_MS 200 -#else - #error Must define a VARIANT_OCTOPUS_CHARGER -#endif /* VARIANT_OCTOPUS_CHARGER */ - -/* Common charger defines */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_CHARGER -#define CONFIG_CHARGER_INPUT_CURRENT 512 /* Allow low-current USB charging */ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_USB_CHARGER - -/* Common battery defines */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_L -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART - -/******************************************************************************* - * USB-C Configs - * Automatically defined by VARIANT_OCTOPUS_EC_ variant. - */ - - /* - * Variant USBC defines. Pick one: - * VARIANT_OCTOPUS_USBC_STANDALONE_TCPCS - * VARIANT_OCTOPUS_USBC_ITE_EC_TCPCS (requires) - */ -#if defined(VARIANT_OCTOPUS_USBC_STANDALONE_TCPCS) - #define CONFIG_USB_PD_TCPC_LOW_POWER - #define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#if !defined(VARIANT_OCTOPUS_TCPC_0_PS8751) - #define CONFIG_USB_PD_TCPM_ANX7447 /* C0 TCPC: ANX7447QN */ -#endif - #define CONFIG_USB_PD_TCPM_PS8751 /* C1 TCPC: PS8751 */ - #define CONFIG_USB_PD_VBUS_DETECT_TCPC - #define CONFIG_USBC_PPC_NX20P3483 -#elif defined(VARIANT_OCTOPUS_USBC_ITE_EC_TCPCS) - #undef CONFIG_USB_PD_TCPC_LOW_POWER - #undef CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE - #define CONFIG_USB_PD_VBUS_DETECT_PPC - #define CONFIG_USB_PD_TCPM_ITE_ON_CHIP /* C0 & C1 TCPC: ITE EC */ - #define CONFIG_USB_MUX_IT5205 /* C0 MUX: IT5205 */ - #define CONFIG_USB_PD_TCPM_PS8751 /* C1 Mux: PS8751 */ - #define CONFIG_USB_PD_TCPM_PS8751_CUSTOM_MUX_DRIVER - #define CONFIG_USBC_PPC_SN5S330 /* C0 & C1 PPC: each SN5S330 */ - #define CONFIG_USBC_PPC_VCONN - #define CONFIG_USBC_PPC_DEDICATED_INT -#else - #error Must define a VARIANT_OCTOPUS_USBC -#endif /* VARIANT_OCTOPUS_USBC */ - -/* Common USB-C defines */ -#define USB_PD_PORT_TCPC_0 0 -#define USB_PD_PORT_TCPC_1 1 -#define CONFIG_USB_PID 0x5046 - -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_PD_3A_PORTS 0 -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_BC12_DETECT_MAX14637 -#undef CONFIG_BC12_MAX14637_DELAY_FROM_OFF_TO_ON_MS -#define CONFIG_BC12_MAX14637_DELAY_FROM_OFF_TO_ON_MS 100 -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_CMD_PPC_DUMP - -/* TODO(b/76218141): Use correct PD delay values */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* TODO(b/76218141): Use correct PD power values */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/******************************************************************************* - * USB-A Configs - */ - -/* Common USB-A defines */ -#define USB_PORT_COUNT 2 -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP -#define CONFIG_USB_PORT_POWER_SMART_INVERTED -#define GPIO_USB1_ILIM_SEL GPIO_USB_A0_CHARGE_EN_L -#define GPIO_USB2_ILIM_SEL GPIO_USB_A1_CHARGE_EN_L - -/******************************************************************************* - * SoC / PCH Config - */ - - /* Common SoC / PCH defines */ -#define CONFIG_CHIPSET_GEMINILAKE -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_HOSTCMD_ESPI -/* TODO(b/74123961): Enable Virtual Wires after bringup */ -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_PP5000_CONTROL -#define CONFIG_EXTPOWER_GPIO - -/******************************************************************************* - * Keyboard Config - */ - -/* Common Keyboard Defines */ -#define CONFIG_CMD_KEYBOARD - -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2 -#undef CONFIG_KEYBOARD_VIVALDI - -/******************************************************************************* - * Sensor Config - */ - -/* Common Sensor Defines */ -#define CONFIG_TABLET_MODE -#define CONFIG_GMR_TABLET_MODE -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L -/* - * Slew rate on the PP1800_SENSOR load switch requires a short delay on startup. - */ -#undef CONFIG_MOTION_SENSE_RESUME_DELAY_US -#define CONFIG_MOTION_SENSE_RESUME_DELAY_US (10 * MSEC) - -#ifndef VARIANT_OCTOPUS_NO_SENSORS -/* - * Interrupt and fifo are only used for base accelerometer - * and the lid sensor is polled real-time (in forced mode). - */ -#define CONFIG_ACCEL_INTERRUPTS -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* Power of 2 - Too large of a fifo causes too much timestamp jitter */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#endif /* VARIANT_OCTOPUS_NO_SENSORS */ - -/* - * Sensor stack in EC/Kernel depends on a hardware interrupt pin from EC->AP, so - * do not define CONFIG_MKBP_USE_HOST_EVENT since all octopus boards use - * hardware pin to send interrupt from EC -> AP (except casta). - */ -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" - -/* Forward declare common (within octopus) board-specific functions */ -void board_reset_pd_mcu(void); - -#ifdef VARIANT_OCTOPUS_USBC_STANDALONE_TCPCS -void tcpc_alert_event(enum gpio_signal signal); -#endif - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/octopus/build.mk b/baseboard/octopus/build.mk deleted file mode 100644 index bb8a6f8267..0000000000 --- a/baseboard/octopus/build.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -*- makefile -*- -# Copyright 2018 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o cbi_ssfc.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o -baseboard-$(VARIANT_OCTOPUS_EC_NPCX796FB)+=variant_ec_npcx796fb.o -baseboard-$(VARIANT_OCTOPUS_EC_ITE8320)+=variant_ec_ite8320.o -baseboard-$(VARIANT_OCTOPUS_USBC_STANDALONE_TCPCS)+= \ - variant_usbc_standalone_tcpcs.o -baseboard-$(VARIANT_OCTOPUS_USBC_ITE_EC_TCPCS)+=variant_usbc_ec_tcpcs.o diff --git a/baseboard/octopus/cbi_ssfc.c b/baseboard/octopus/cbi_ssfc.c deleted file mode 100644 index 80d8614eb5..0000000000 --- a/baseboard/octopus/cbi_ssfc.c +++ /dev/null @@ -1,49 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "cbi_ssfc.h" -#include "common.h" -#include "console.h" -#include "cros_board_info.h" -#include "hooks.h" - -/**************************************************************************** - * Octopus CBI Second Source Factory Cache - */ - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ##args) - -/* Cache SSFC on init since we don't expect it to change in runtime */ -static uint32_t cached_ssfc; - -static void cbi_ssfc_init(void) -{ - if (cbi_get_ssfc(&cached_ssfc) != EC_SUCCESS) - /* Default to 0 when CBI isn't populated */ - cached_ssfc = 0; - - CPRINTS("CBI SSFC: 0x%04X", cached_ssfc); -} -DECLARE_HOOK(HOOK_INIT, cbi_ssfc_init, HOOK_PRIO_FIRST); - -enum ssfc_tcpc_p1 get_cbi_ssfc_tcpc_p1(void) -{ - return ((cached_ssfc & SSFC_TCPC_P1_MASK) >> SSFC_TCPC_P1_OFFSET); -} - -enum ssfc_ppc_p1 get_cbi_ssfc_ppc_p1(void) -{ - return ((cached_ssfc & SSFC_PPC_P1_MASK) >> SSFC_PPC_P1_OFFSET); -} - -enum ssfc_charger get_cbi_ssfc_charger(void) -{ - return ((cached_ssfc & SSFC_CHARGER_MASK) >> SSFC_CHARGER_OFFSET); -} - -enum ssfc_sensor get_cbi_ssfc_sensor(void) -{ - return ((cached_ssfc & SSFC_SENSOR_MASK) >> SSFC_SENSOR_OFFSET); -} diff --git a/baseboard/octopus/cbi_ssfc.h b/baseboard/octopus/cbi_ssfc.h deleted file mode 100644 index b762336e59..0000000000 --- a/baseboard/octopus/cbi_ssfc.h +++ /dev/null @@ -1,66 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef _OCTOPUS_CBI_SSFC__H_ -#define _OCTOPUS_CBI_SSFC__H_ - -/**************************************************************************** - * Octopus CBI Second Source Factory Cache - */ - -/* - * TCPC Port 1 (Bits 0-2) - */ -enum ssfc_tcpc_p1 { - SSFC_TCPC_P1_DEFAULT, - SSFC_TCPC_P1_PS8751, - SSFC_TCPC_P1_PS8755, -}; -#define SSFC_TCPC_P1_OFFSET 0 -#define SSFC_TCPC_P1_MASK GENMASK(2, 0) - -/* - * PPC Port 1 (Bits 3-5) - */ -enum ssfc_ppc_p1 { - SSFC_PPC_P1_DEFAULT, - SSFC_PPC_P1_NX20P348X, - SSFC_PPC_P1_SYV682X, -}; -#define SSFC_PPC_P1_OFFSET 3 -#define SSFC_PPC_P1_MASK GENMASK(5, 3) - -/* - * Charger (Bits 8-6) - */ -enum ssfc_charger { - SSFC_CHARGER_DEFAULT, - SSFC_CHARGER_ISL9238, - SSFC_CHARGER_BQ25710, -}; -#define SSFC_CHARGER_OFFSET 6 -#define SSFC_CHARGER_MASK GENMASK(8, 6) - -/* - * Audio (Bits 11-9) - */ - -/* - * Sensor (Bits 14-12) - */ -enum ssfc_sensor { - SSFC_SENSOR_DEFAULT, - SSFC_SENSOR_BMI160, - SSFC_SENSOR_ICM426XX, -}; -#define SSFC_SENSOR_OFFSET 12 -#define SSFC_SENSOR_MASK GENMASK(14, 12) - -enum ssfc_tcpc_p1 get_cbi_ssfc_tcpc_p1(void); -enum ssfc_ppc_p1 get_cbi_ssfc_ppc_p1(void); -enum ssfc_charger get_cbi_ssfc_charger(void); -enum ssfc_sensor get_cbi_ssfc_sensor(void); - -#endif /* _OCTOPUS_CBI_SSFC__H_ */ diff --git a/baseboard/octopus/usb_pd_policy.c b/baseboard/octopus/usb_pd_policy.c deleted file mode 100644 index 3dd6ad29f5..0000000000 --- a/baseboard/octopus/usb_pd_policy.c +++ /dev/null @@ -1,78 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for octopus boards */ - -#include "charge_manager.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap if pp5000_A rail is enabled */ - return gpio_get_level(GPIO_EN_PP5000); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -#ifdef CONFIG_USB_PD_VBUS_DETECT_PPC -int pd_snk_is_vbus_provided(int port) -{ - return ppc_is_vbus_present(port); -} -#endif - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} diff --git a/baseboard/octopus/variant_ec_ite8320.c b/baseboard/octopus/variant_ec_ite8320.c deleted file mode 100644 index 459ea113b3..0000000000 --- a/baseboard/octopus/variant_ec_ite8320.c +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common code for VARIANT_OCTOPUS_EC_ITE8320 configuration */ - -#include "gpio.h" -#include "i2c.h" -#include "util.h" - -/******************************************************************************/ -/* Wake up pins */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, - /* - * The PPC interrupts (which fire when Vbus changes) is a proxy for - * AC_PRESENT. This allows us to turn off the PPC SNK FETS during - * hibernation which saves power. Once the EC wakes up, it will enable - * the SNK FETs and power will make it to the rest of the system. - */ - GPIO_USB_C0_PD_INT_ODL, - GPIO_USB_C1_PD_INT_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/******************************************************************************/ -/* I2C port map configuration */ -const struct i2c_port_t i2c_ports[] = { - {"power", IT83XX_I2C_CH_A, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA}, - {"sensor", IT83XX_I2C_CH_B, 100, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"usbc0", IT83XX_I2C_CH_C, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"usbc1", IT83XX_I2C_CH_E, 400, GPIO_I2C4_SCL, GPIO_I2C4_SDA}, - {"eeprom", IT83XX_I2C_CH_F, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); diff --git a/baseboard/octopus/variant_ec_npcx796fb.c b/baseboard/octopus/variant_ec_npcx796fb.c deleted file mode 100644 index bccb360563..0000000000 --- a/baseboard/octopus/variant_ec_npcx796fb.c +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common code for VARIANT_OCTOPUS_EC_NPCX796FB configuration */ - -#include "charge_manager.h" -#include "gpio.h" -#include "i2c.h" -#include "power.h" -#ifdef CONFIG_PWM -#include "pwm.h" -#include "pwm_chip.h" -#endif -#include "timer.h" -#include "usbc_ppc.h" -#include "util.h" - -/******************************************************************************/ -/* Wake up pins */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, - /* EC_RST_ODL needs to wake device while in PSL hibernate. */ - GPIO_EC_RST_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/******************************************************************************/ -/* I2C port map configuration */ -const struct i2c_port_t i2c_ports[] = { - {"battery", I2C_PORT_BATTERY, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA}, - {"tcpc0", I2C_PORT_TCPC0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"tcpc1", I2C_PORT_TCPC1, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"eeprom", I2C_PORT_EEPROM, 100, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, - {"charger", I2C_PORT_CHARGER, 100, GPIO_I2C4_SCL, GPIO_I2C4_SDA}, -#ifndef VARIANT_OCTOPUS_NO_SENSORS - {"sensor", I2C_PORT_SENSOR, 100, GPIO_I2C7_SCL, GPIO_I2C7_SDA}, -#endif -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -#ifdef CONFIG_PWM -/******************************************************************************/ -/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_KBLIGHT] = { .channel = 3, .flags = PWM_CONFIG_DSLEEP, - .freq = 100 }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); -#endif diff --git a/baseboard/octopus/variant_usbc_ec_tcpcs.c b/baseboard/octopus/variant_usbc_ec_tcpcs.c deleted file mode 100644 index 2e3248410f..0000000000 --- a/baseboard/octopus/variant_usbc_ec_tcpcs.c +++ /dev/null @@ -1,159 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common code for VARIANT_OCTOPUS_USBC_EC_TCPCS configuration */ - -#include "charge_state.h" -#include "common.h" -#include "console.h" -#include "driver/ppc/sn5s330.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/usb_mux/it5205.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "gpio.h" -#include "hooks.h" -#include "system.h" -#include "tcpm/tcpci.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "util.h" - -#define USB_PD_PORT_ITE_0 0 -#define USB_PD_PORT_ITE_1 1 - -/******************************************************************************/ -/* USB-C TPCP Configuration */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_ITE_0] = { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it83xx_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, - [USB_PD_PORT_ITE_1] = { - .bus_type = EC_BUS_TYPE_EMBEDDED, - /* TCPC is embedded within EC so no i2c config needed */ - .drv = &it83xx_tcpm_drv, - /* Alert is active-low, push-pull */ - .flags = 0, - }, -}; - -/******************************************************************************/ -/* USB-C MUX Configuration */ - -/* TODO(crbug.com/826441): Consolidate this logic with other impls */ -static void board_it83xx_hpd_status(const struct usb_mux *me, - mux_state_t mux_state) -{ - int hpd_lvl = (mux_state & USB_PD_MUX_HPD_LVL) ? 1 : 0; - int hpd_irq = (mux_state & USB_PD_MUX_HPD_IRQ) ? 1 : 0; - enum gpio_signal gpio = me->usb_port ? - GPIO_USB_C1_HPD_1V8_ODL : GPIO_USB_C0_HPD_1V8_ODL; - - /* Invert HPD level since GPIOs are active low. */ - hpd_lvl = !hpd_lvl; - - gpio_set_level(gpio, hpd_lvl); - if (hpd_irq) { - gpio_set_level(gpio, 1); - msleep(1); - gpio_set_level(gpio, hpd_lvl); - } -} - -/* This configuration might be override by each boards */ -struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_ITE_0] = { - .usb_port = USB_PD_PORT_ITE_0, - .i2c_port = I2C_PORT_USB_MUX, - .i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS, - .driver = &it5205_usb_mux_driver, - .hpd_update = &board_it83xx_hpd_status, - }, - [USB_PD_PORT_ITE_1] = { - .usb_port = USB_PD_PORT_ITE_1, - /* Use PS8751 as mux only */ - .i2c_port = I2C_PORT_USBC1, - .i2c_addr_flags = PS8751_I2C_ADDR1_FLAGS, - .flags = USB_MUX_FLAG_NOT_TCPC, - .driver = &ps8xxx_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - } -}; - -/******************************************************************************/ -/* USB-C PPC Configuration */ -struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_ITE_0] = { - .i2c_port = I2C_PORT_USBC0, - .i2c_addr_flags = SN5S330_ADDR0_FLAGS, - .drv = &sn5s330_drv - }, - [USB_PD_PORT_ITE_1] = { - .i2c_port = I2C_PORT_USBC1, - .i2c_addr_flags = SN5S330_ADDR0_FLAGS, - .drv = &sn5s330_drv - }, -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/******************************************************************************/ -/* Power Delivery and charing functions */ - -void variant_tcpc_init(void) -{ - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL); -} -/* Called after the baseboard_tcpc_init (via +3) */ -DECLARE_HOOK(HOOK_INIT, variant_tcpc_init, HOOK_PRIO_INIT_I2C + 3); - -uint16_t tcpc_get_alert_status(void) -{ - /* - * Since C0/C1 TCPC are embedded within EC, we don't need the PDCMD - * tasks.The (embedded) TCPC status since chip driver code will - * handles its own interrupts and forward the correct events to - * the PD_C0 task. See it83xx/intc.c - */ - return 0; -} - -/** - * Reset all system PD/TCPC MCUs -- currently called from both - * handle_pending_reboot() in common/system.c and baseboard_tcpc_init() in the - * octopus/baseboard.c - */ -void board_reset_pd_mcu(void) -{ - /* - * C0 & C1: The internal TCPC on ITE EC does not have a reset signal, - * but it will get reset when the EC gets reset. We will, however, - * reset the USB muxes here. - */ - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 0); - gpio_set_level(GPIO_USB_C1_PD_RST_ODL, 0); - - msleep(PS8XXX_RESET_DELAY_MS); - - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 1); - gpio_set_level(GPIO_USB_C1_PD_RST_ODL, 1); -} - -void board_pd_vconn_ctrl(int port, enum usbpd_cc_pin cc_pin, int enabled) -{ - /* - * We ignore the cc_pin because the polarity should already be set - * correctly in the PPC driver via the pd state machine. - */ - if (ppc_set_vconn(port, enabled) != EC_SUCCESS) - cprints(CC_USBPD, "C%d: Failed %sabling vconn", - port, enabled ? "en" : "dis"); -} diff --git a/baseboard/octopus/variant_usbc_standalone_tcpcs.c b/baseboard/octopus/variant_usbc_standalone_tcpcs.c deleted file mode 100644 index fb5d466e65..0000000000 --- a/baseboard/octopus/variant_usbc_standalone_tcpcs.c +++ /dev/null @@ -1,216 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Common code for VARIANT_OCTOPUS_USBC_STANDALONE_TCPCS configuration */ - -#include "charge_state.h" -#include "common.h" -#include "console.h" -#include "driver/ppc/nx20p348x.h" -#include "driver/tcpm/anx7447.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tcpm.h" -#include "gpio.h" -#include "hooks.h" -#include "system.h" -#include "tcpm/tcpci.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) - -/******************************************************************************/ -/* USB-C TPCP Configuration */ -const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_TCPC_0] = { -#if defined(VARIANT_OCTOPUS_TCPC_0_PS8751) - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = PS8751_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, -#else - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = AN7447_TCPC0_I2C_ADDR_FLAGS, - }, - .drv = &anx7447_tcpm_drv, -#endif - }, - [USB_PD_PORT_TCPC_1] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC1, - .addr_flags = PS8751_I2C_ADDR1_FLAGS, - }, - .drv = &ps8xxx_tcpm_drv, - }, -}; - -/******************************************************************************/ -/* USB-C MUX Configuration */ - -#if defined(VARIANT_OCTOPUS_TCPC_0_PS8751) -static int ps8751_tune_mux(const struct usb_mux *me) -{ - /* Tune USB mux registers for casta's port 0 Rx measurement */ - mux_write(me, PS8XXX_REG_MUX_USB_C2SS_EQ, 0x40); - return EC_SUCCESS; -} -#endif - -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_TCPC_0] = { - .usb_port = USB_PD_PORT_TCPC_0, -#if defined(VARIANT_OCTOPUS_TCPC_0_PS8751) - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .board_init = &ps8751_tune_mux, -#else - .driver = &anx7447_usb_mux_driver, - .hpd_update = &anx7447_tcpc_update_hpd_status, -#endif - }, - [USB_PD_PORT_TCPC_1] = { - .usb_port = USB_PD_PORT_TCPC_1, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - } -}; - -/******************************************************************************/ -/* USB-C PPC Configuration */ -struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = { - [USB_PD_PORT_TCPC_0] = { - .i2c_port = I2C_PORT_TCPC0, - .i2c_addr_flags = NX20P3483_ADDR2_FLAGS, - .drv = &nx20p348x_drv, - }, - [USB_PD_PORT_TCPC_1] = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = NX20P3483_ADDR2_FLAGS, - .drv = &nx20p348x_drv, - }, -}; -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -/******************************************************************************/ -/* Power Delivery and charing functions */ - -void tcpc_alert_event(enum gpio_signal signal) -{ - int port = -1; - - switch (signal) { - case GPIO_USB_C0_MUX_INT_ODL: - port = 0; - break; - case GPIO_USB_C1_MUX_INT_ODL: - port = 1; - break; - default: - return; - } - - schedule_deferred_pd_interrupt(port); -} - -void variant_tcpc_init(void) -{ - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_PD_C0_INT_ODL); - gpio_enable_interrupt(GPIO_USB_PD_C1_INT_ODL); - - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_MUX_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_MUX_INT_ODL); -} -/* Called after the baseboard_tcpc_init (via +3) */ -DECLARE_HOOK(HOOK_INIT, variant_tcpc_init, HOOK_PRIO_INIT_I2C + 3); - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - if (!gpio_get_level(GPIO_USB_C0_MUX_INT_ODL)) { -#if defined(VARIANT_OCTOPUS_TCPC_0_PS8751) - if (gpio_get_level(GPIO_USB_C0_PD_RST_ODL)) -#else - if (!gpio_is_implemented(GPIO_USB_C0_PD_RST) || - !gpio_get_level(GPIO_USB_C0_PD_RST)) -#endif - status |= PD_STATUS_TCPC_ALERT_0; - } - - if (!gpio_get_level(GPIO_USB_C1_MUX_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C1_PD_RST_ODL)) - status |= PD_STATUS_TCPC_ALERT_1; - } - - return status; -} - -/** - * Reset all system PD/TCPC MCUs -- currently only called from - * handle_pending_reboot() in common/power.c just before hard - * resetting the system. This logic is likely not needed as the - * PP3300_A rail should be dropped on EC reset. - */ -void board_reset_pd_mcu(void) -{ -#if defined(VARIANT_OCTOPUS_TCPC_0_PS8751) - /* - * C0: Assert reset to TCPC0 (PS8751) for required delay if we have a - * battery - */ - if (battery_is_present() == BP_YES) { - /* - * TODO(crbug:846412): After refactor, ensure that battery has - * enough charge to last the reboot as well - */ - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 0); - msleep(PS8XXX_RESET_DELAY_MS); - gpio_set_level(GPIO_USB_C0_PD_RST_ODL, 1); - } -#else - /* - * C0: Assert reset to TCPC0 (ANX7447) for required delay (1ms) only if - * we have a battery - * - * Note: The TEST_R pin is not hooked up to a GPIO on all boards, so - * verify the name exists before setting it. After the name is - * introduced for later board firmware, this pin will still be wired - * to USB2_OTG_ID on the proto boards, which should be set to open - * drain so it can't be driven high. - */ - if (gpio_is_implemented(GPIO_USB_C0_PD_RST) && - battery_is_present() == BP_YES) { - gpio_set_level(GPIO_USB_C0_PD_RST, 1); - msleep(ANX74XX_RESET_HOLD_MS); - gpio_set_level(GPIO_USB_C0_PD_RST, 0); - msleep(ANX74XX_RESET_FINISH_MS); - } -#endif - /* - * C1: Assert reset to TCPC1 (PS8751) for required delay (1ms) only if - * we have a battery, otherwise we may brown out the system. - */ - if (battery_is_present() == BP_YES) { - /* - * TODO(crbug:846412): After refactor, ensure that battery has - * enough charge to last the reboot as well - */ - gpio_set_level(GPIO_USB_C1_PD_RST_ODL, 0); - msleep(PS8XXX_RESET_DELAY_MS); - gpio_set_level(GPIO_USB_C1_PD_RST_ODL, 1); - } else { - CPRINTS("Skipping C1 TCPC reset because no battery"); - } -} diff --git a/baseboard/trogdor/baseboard.c b/baseboard/trogdor/baseboard.c deleted file mode 100644 index de01d58211..0000000000 --- a/baseboard/trogdor/baseboard.c +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Trogdor baseboard-specific configuration */ - -#include "i2c.h" - -/* Wake-up pins for hibernate */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, - GPIO_EC_RST_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY || - port == I2C_PORT_TCPC0 || - port == I2C_PORT_TCPC1); -} diff --git a/baseboard/trogdor/baseboard.h b/baseboard/trogdor/baseboard.h deleted file mode 100644 index 4eabeb0ca3..0000000000 --- a/baseboard/trogdor/baseboard.h +++ /dev/null @@ -1,216 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Trogdor baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -/* - * By default, enable all console messages excepted event and HC: - * The sensor stack is generating a lot of activity. - * They can be enabled through the console command 'chan'. - */ -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_HOSTCMD))) - -/* NPCX7 config */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -#define NPCX_TACH_SEL2 0 /* No tach. */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ - -/* Internal SPI flash on NPCX7 */ -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - -/* EC Modules */ -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_VIRTUAL_BATTERY -#define CONFIG_I2C_PASSTHRU_RESTRICTED -#define CONFIG_LED_COMMON -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_ADC -#define CONFIG_BACKLIGHT_LID -#define CONFIG_FPU -#define CONFIG_PWM -#define CONFIG_PWM_DISPLIGHT - -#define CONFIG_VBOOT_HASH - -#undef CONFIG_PECI - -#define CONFIG_HOSTCMD_SHI -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_HOSTCMD_SECTION_SORTED -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_MKBP_USE_GPIO - -#define CONFIG_BOARD_VERSION_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_EMULATED_SYSRQ -#define CONFIG_CMD_BUTTON -#define CONFIG_SWITCH -#define CONFIG_LID_SWITCH -#define CONFIG_EXTPOWER_GPIO - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -/* Increase console output buffer since we have the RAM available. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -/* Battery */ -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BATT_PRES_ODL -#define CONFIG_BATTERY_SMART - -/* Charger */ -#define CONFIG_CHARGER -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER_ISL9238 -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGE_RAMP_HW -#define CONFIG_USB_CHARGER -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON -#define CONFIG_CHARGER_PSYS -#define CONFIG_CHARGER_PSYS_READ -#define CONFIG_CHARGER_DISCHARGE_ON_AC - -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 10000 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 - -/* - * USB ID - * - * This is allocated specifically for Trogdor - * http://google3/hardware/standards/usb/ - */ -#define CONFIG_USB_PID 0x5043 - -/* USB */ -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_CMD_TCPC_DUMP -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_5V_EN_CUSTOM -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* RTC */ -#define CONFIG_CMD_RTC -#define CONFIG_HOSTCMD_RTC - -/* Sensors */ -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is a power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO - -/* PD */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -#define PD_OPERATING_POWER_MW 10000 -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Chipset */ -#define CONFIG_CHIPSET_SC7180 -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CHIPSET_RESUME_INIT_HOOK -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_PP5000_CONTROL -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_CMD_AP_RESET_LOG - -/* - * Macros for GPIO signals used in common code that don't match the - * schematic names. Signal names in gpio.inc match the schematic and are - * then redefined here to so it's more clear which signal is being used for - * which purpose. - */ -#define GPIO_POWER_BUTTON_L GPIO_EC_PWR_BTN_ODL -#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL -#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL -#define GPIO_LID_OPEN GPIO_LID_OPEN_EC -#define GPIO_SHI_CS_L GPIO_AP_EC_SPI_CS_L -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW -#define GPIO_BATT_PRES_ODL GPIO_EC_BATT_PRES_ODL -#define GPIO_EN_PP5000 GPIO_EN_PP5000_A -#define GPIO_ENABLE_BACKLIGHT GPIO_EC_BL_DISABLE_L -#define GPIO_BOARD_VERSION1 GPIO_BRD_ID0 -#define GPIO_BOARD_VERSION2 GPIO_BRD_ID1 -#define GPIO_BOARD_VERSION3 GPIO_BRD_ID2 -#define GPIO_KBD_KSO2 GPIO_EC_KSO_02_INV - -/* I2C Ports */ -#define I2C_PORT_BATTERY I2C_PORT_POWER -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_BATTERY -#define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_ACCEL I2C_PORT_SENSOR -#define I2C_PORT_POWER NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_WLC NPCX_I2C_PORT3_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT5_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 - -/* UART */ -#define CONFIG_CMD_CHARGEN - -/* Define the host events which are allowed to wake AP up from S3 */ -#define CONFIG_MKBP_HOST_EVENT_WAKEUP_MASK \ - (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_RTC) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) | \ - EC_HOST_EVENT_MASK(EC_HOST_EVENT_DEVICE)) - -/* And the MKBP events */ -#ifdef HAS_TASK_KEYSCAN -#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_KEY_MATRIX) | \ - BIT(EC_MKBP_EVENT_HOST_EVENT) | \ - BIT(EC_MKBP_EVENT_SENSOR_FIFO)) -#else -#define CONFIG_MKBP_EVENT_WAKEUP_MASK \ - (BIT(EC_MKBP_EVENT_HOST_EVENT) | \ - BIT(EC_MKBP_EVENT_SENSOR_FIFO)) -#endif - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/trogdor/build.mk b/baseboard/trogdor/build.mk deleted file mode 100644 index 0f36051eee..0000000000 --- a/baseboard/trogdor/build.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -*- makefile -*- -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y+=baseboard.o -baseboard-y+=hibernate.o -baseboard-y+=power.o -baseboard-y+=usbc_config.o -baseboard-y+=usb_pd_policy.o diff --git a/baseboard/trogdor/hibernate.c b/baseboard/trogdor/hibernate.c deleted file mode 100644 index c28082e75d..0000000000 --- a/baseboard/trogdor/hibernate.c +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "gpio.h" -#include "system.h" - -void board_hibernate_late(void) -{ - /* Set the hibernate GPIO to turn off the rails */ - gpio_set_level(GPIO_HIBERNATE_L, 0); -} diff --git a/baseboard/trogdor/power.c b/baseboard/trogdor/power.c deleted file mode 100644 index b539539c98..0000000000 --- a/baseboard/trogdor/power.c +++ /dev/null @@ -1,38 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "gpio.h" -#include "hooks.h" -#include "power.h" -#include "task.h" - -void board_chipset_pre_init(void) -{ - /* Turn on the 3.3V rail */ - gpio_set_level(GPIO_EN_PP3300_A, 1); - - /* Turn on the 5V rail. */ -#ifdef CONFIG_POWER_PP5000_CONTROL - power_5v_enable(task_get_current(), 1); -#else /* !defined(CONFIG_POWER_PP5000_CONTROL) */ - gpio_set_level(GPIO_EN_PP5000, 1); -#endif /* defined(CONFIG_POWER_PP5000_CONTROL) */ -} -DECLARE_HOOK(HOOK_CHIPSET_PRE_INIT, board_chipset_pre_init, HOOK_PRIO_DEFAULT); - -void board_chipset_shutdown_complete(void) -{ - /* Turn off the 5V rail. */ -#ifdef CONFIG_POWER_PP5000_CONTROL - power_5v_enable(task_get_current(), 0); -#else /* !defined(CONFIG_POWER_PP5000_CONTROL) */ - gpio_set_level(GPIO_EN_PP5000, 0); -#endif /* defined(CONFIG_POWER_PP5000_CONTROL) */ - - /* Turn off the 3.3V and 5V rails. */ - gpio_set_level(GPIO_EN_PP3300_A, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN_COMPLETE, board_chipset_shutdown_complete, - HOOK_PRIO_DEFAULT); diff --git a/baseboard/trogdor/usb_pd_policy.c b/baseboard/trogdor/usb_pd_policy.c deleted file mode 100644 index d7ed03e941..0000000000 --- a/baseboard/trogdor/usb_pd_policy.c +++ /dev/null @@ -1,262 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charge_manager.h" -#include "chipset.h" -#include "console.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* In G3, do not allow vconn swap since PP5000 rail is off */ - return gpio_get_level(GPIO_EN_PP5000); -} - -static uint8_t vbus_en[CONFIG_USB_PD_PORT_MAX_COUNT]; -#if CONFIG_USB_PD_PORT_MAX_COUNT == 1 -static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = {TYPEC_RP_1A5}; -#else -static uint8_t vbus_rp[CONFIG_USB_PD_PORT_MAX_COUNT] = {TYPEC_RP_1A5, - TYPEC_RP_1A5}; -#endif - -static void board_vbus_update_source_current(int port) -{ - /* Both port are controlled by PPC SN5S330. */ - ppc_set_vbus_source_current_limit(port, vbus_rp[port]); - ppc_vbus_source_enable(port, vbus_en[port]); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = vbus_en[port]; - - /* Disable VBUS */ - vbus_en[port] = 0; - board_vbus_update_source_current(port); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - /* Disable charging */ - board_vbus_sink_enable(port, 0); - - pd_set_vbus_discharge(port, 0); - - /* Provide VBUS */ - vbus_en[port] = 1; - board_vbus_update_source_current(port); - - /* notify host of power info change */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; /* we are ready */ -} - -int board_vbus_source_enabled(int port) -{ - return vbus_en[port]; -} - -__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp) -{ - vbus_rp[port] = rp; - board_vbus_update_source_current(port); -} - -int pd_snk_is_vbus_provided(int port) -{ - return tcpm_check_vbus_level(port, VBUS_PRESENT); -} - -/* ----------------- Vendor Defined Messages ------------------ */ -#ifdef CONFIG_USB_PD_ALT_MODE_DFP -__override int svdm_dp_config(int port, uint32_t *payload) -{ - int opos = pd_alt_mode(port, TCPCI_MSG_SOP, USB_SID_DISPLAYPORT); - uint8_t pin_mode = get_dp_pin_mode(port); - - if (!pin_mode) - return 0; - - /* - * Defer setting the usb_mux until HPD goes high, svdm_dp_attention(). - * The AP only supports one DP phy. An external DP mux switches between - * the two ports. Should switch those muxes when it is really used, - * i.e. HPD high; otherwise, the real use case is preempted, like: - * (1) plug a dongle without monitor connected to port-0, - * (2) plug a dongle without monitor connected to port-1, - * (3) plug a monitor to the port-1 dongle. - */ - - payload[0] = VDO(USB_SID_DISPLAYPORT, 1, - CMD_DP_CONFIG | VDO_OPOS(opos)); - payload[1] = VDO_DP_CFG(pin_mode, /* pin mode */ - 1, /* DPv1.3 signaling */ - 2); /* UFP connected */ - return 2; -}; - -__override void svdm_dp_post_config(int port) -{ - dp_flags[port] |= DP_FLAGS_DP_ON; -} - -/** - * Is the port fine to be muxed its DisplayPort lines? - * - * Only one port can be muxed to DisplayPort at a time. - * - * @param port Port number of TCPC. - * @return 1 is fine; 0 is bad as other port is already muxed; - */ -static int is_dp_muxable(int port) -{ - int i; - - for (i = 0; i < CONFIG_USB_PD_PORT_MAX_COUNT; i++) - if (i != port) { - if (usb_mux_get(i) & USB_PD_MUX_DP_ENABLED) - return 0; - } - - return 1; -} - -__override int svdm_dp_attention(int port, uint32_t *payload) -{ - enum gpio_signal hpd = GPIO_DP_HOT_PLUG_DET; - int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); - int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); - int cur_lvl = gpio_get_level(hpd); - mux_state_t mux_state; - - dp_status[port] = payload[1]; - - if (!is_dp_muxable(port)) { - /* TODO(waihong): Info user? */ - CPRINTS("p%d: The other port is already muxed.", port); - return 0; - } - - /* - * Initial implementation to handle HPD. Only the first-plugged port - * works, i.e. sending HPD signal to AP. The second-plugged port - * will be ignored. - * - * TODO(waihong): Continue the above case, if the first-plugged port - * is then unplugged, switch to the second-plugged port and signal AP? - */ - if (lvl) { - /* - * Enable and switch the DP port selection mux to the - * correct port. - * - * TODO(waihong): Better to move switching DP mux to - * the usb_mux abstraction. - */ - gpio_set_level(GPIO_DP_MUX_SEL, port == 1); - gpio_set_level(GPIO_DP_MUX_OE_L, 0); - - /* Connect the SBU lines in PPC chip. */ - if (IS_ENABLED(CONFIG_USBC_PPC_SBU)) - ppc_set_sbu(port, 1); - - /* - * Connect the USB SS/DP lines in TCPC chip. - * - * When mf_pref not true, still use the dock muxing - * because of the board USB-C topology (limited to 2 - * lanes DP). - */ - usb_mux_set(port, USB_PD_MUX_DOCK, - USB_SWITCH_CONNECT, - polarity_rm_dts(pd_get_polarity(port))); - } else { - /* Disconnect the DP port selection mux. */ - gpio_set_level(GPIO_DP_MUX_OE_L, 1); - gpio_set_level(GPIO_DP_MUX_SEL, 0); - - /* Disconnect the SBU lines in PPC chip. */ - if (IS_ENABLED(CONFIG_USBC_PPC_SBU)) - ppc_set_sbu(port, 0); - - /* Disconnect the DP but keep the USB SS lines in TCPC chip. */ - usb_mux_set(port, USB_PD_MUX_USB_ENABLED, - USB_SWITCH_CONNECT, - polarity_rm_dts(pd_get_polarity(port))); - } - - if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && - (irq || lvl)) - /* - * Wake up the AP. IRQ or level high indicates a DP sink is now - * present. - */ - pd_notify_dp_alt_mode_entry(port); - - /* Configure TCPC for the HPD event, for proper muxing */ - mux_state = (lvl ? USB_PD_MUX_HPD_LVL : USB_PD_MUX_HPD_LVL_DEASSERTED) | - (irq ? USB_PD_MUX_HPD_IRQ : USB_PD_MUX_HPD_IRQ_DEASSERTED); - usb_mux_hpd_update(port, mux_state); - - /* Signal AP for the HPD event, through GPIO to AP */ - if (irq & cur_lvl) { - uint64_t now = get_time().val; - /* Wait for the minimum spacing between IRQ_HPD if needed */ - if (now < svdm_hpd_deadline[port]) - usleep(svdm_hpd_deadline[port] - now); - - /* Generate IRQ_HPD pulse */ - gpio_set_level(hpd, 0); - usleep(HPD_DSTREAM_DEBOUNCE_IRQ); - gpio_set_level(hpd, 1); - - /* Set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + - HPD_USTREAM_DEBOUNCE_LVL; - } else if (irq & !lvl) { - CPRINTF("ERR:HPD:IRQ&LOW\n"); - return 0; - } else { - gpio_set_level(hpd, lvl); - /* Set the minimum time delay (2ms) for the next HPD IRQ */ - svdm_hpd_deadline[port] = get_time().val + - HPD_USTREAM_DEBOUNCE_LVL; - } - - return 1; -} - -__override void svdm_exit_dp_mode(int port) -{ - if (is_dp_muxable(port)) { - /* Disconnect the DP port selection mux. */ - gpio_set_level(GPIO_DP_MUX_OE_L, 1); - gpio_set_level(GPIO_DP_MUX_SEL, 0); - - /* Signal AP for the HPD low event */ - usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); - gpio_set_level(GPIO_DP_HOT_PLUG_DET, 0); - } -} -#endif /* CONFIG_USB_PD_ALT_MODE_DFP */ diff --git a/baseboard/trogdor/usbc_config.c b/baseboard/trogdor/usbc_config.c deleted file mode 100644 index 8f3fb02c30..0000000000 --- a/baseboard/trogdor/usbc_config.c +++ /dev/null @@ -1,60 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Trogdor family-specific USB-C configuration */ - -#include "charger.h" -#include "charger/isl923x_public.h" -#include "charge_state.h" -#include "usb_pd.h" - -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL923X_ADDR_FLAGS, - .drv = &isl923x_drv, - }, -}; - -int charger_profile_override(struct charge_state_data *curr) -{ - int usb_mv; - int port; - - if (curr->state != ST_CHARGE) - return 0; - - /* Lower the max requested voltage to 5V when battery is full. */ - if (chipset_in_state(CHIPSET_STATE_ANY_OFF) && - !(curr->batt.flags & BATT_FLAG_BAD_STATUS) && - !(curr->batt.flags & BATT_FLAG_WANT_CHARGE) && - (curr->batt.status & STATUS_FULLY_CHARGED)) - usb_mv = 5000; - else - usb_mv = PD_MAX_VOLTAGE_MV; - - if (pd_get_max_voltage() != usb_mv) { - CPRINTS("VBUS limited to %dmV", usb_mv); - for (port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; port++) - pd_set_external_voltage_limit(port, usb_mv); - } - - return 0; -} - -enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) -{ - return EC_RES_INVALID_PARAM; -} - -enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) -{ - return EC_RES_INVALID_PARAM; -} diff --git a/baseboard/volteer/baseboard.c b/baseboard/volteer/baseboard.c deleted file mode 100644 index 6b3ad33a35..0000000000 --- a/baseboard/volteer/baseboard.c +++ /dev/null @@ -1,93 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Volteer family-specific configuration */ -#include "adc.h" -#include "button.h" -#include "cbi_ec_fw_config.h" -#include "charger.h" -#include "charge_ramp.h" -#include "cros_board_info.h" -#include "driver/charger/isl9241.h" -#include "driver/tcpm/ps8xxx.h" -#include "driver/temp_sensor/thermistor.h" -#include "gpio.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "system.h" -#include "task.h" -#include "temp_sensor.h" -#ifdef CONFIG_ZEPHYR -#include "usbc_config.h" -#endif - -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args) - -/******************************************************************************/ -/* ADC configuration */ -const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_1_CHARGER] = { - .name = "TEMP_CHARGER", - .input_ch = NPCX_ADC_CH0, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, - [ADC_TEMP_SENSOR_2_PP3300_REGULATOR] = { - .name = "TEMP_PP3300_REGULATOR", - .input_ch = NPCX_ADC_CH1, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, - [ADC_TEMP_SENSOR_3_DDR_SOC] = { - .name = "TEMP_DDR_SOC", - .input_ch = NPCX_ADC_CH8, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, - [ADC_TEMP_SENSOR_4_FAN] = { - .name = "TEMP_FAN", - .input_ch = NPCX_ADC_CH3, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -/******************************************************************************/ -/* Wake up pins */ -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_ACOK_OD, - GPIO_POWER_BUTTON_L, - GPIO_EC_RST_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/******************************************************************************/ -/* Temperature sensor configuration */ -const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1_CHARGER] = {.name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_1_CHARGER}, - [TEMP_SENSOR_2_PP3300_REGULATOR] = {.name = "PP3300 Regulator", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_2_PP3300_REGULATOR}, - [TEMP_SENSOR_3_DDR_SOC] = {.name = "DDR and SOC", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_3_DDR_SOC}, - [TEMP_SENSOR_4_FAN] = {.name = "Fan", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_30k9_47k_4050b, - .idx = ADC_TEMP_SENSOR_4_FAN}, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); diff --git a/baseboard/volteer/baseboard.h b/baseboard/volteer/baseboard.h deleted file mode 100644 index 38a464813a..0000000000 --- a/baseboard/volteer/baseboard.h +++ /dev/null @@ -1,285 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Volteer baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -#include <stdbool.h> - -/* - * By default, enable all console messages excepted HC - */ -#define CC_DEFAULT (CC_ALL & ~(BIT(CC_HOSTCMD))) - -/* NPCX7 config */ -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -/* Internal SPI flash on NPCX796FC is 512 kB */ -#define CONFIG_FLASH_SIZE_BYTES (512 * 1024) -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */ - -/* Allow objects to be linked into a flash resident section */ -#define CONFIG_CHIP_INIT_ROM_REGION - -/* EC Defines */ -#define CONFIG_LTO -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CRC8 -#define CONFIG_CBI_EEPROM -#define CONFIG_DPTF -#define CONFIG_FPU -#define CONFIG_HIBERNATE_PSL -#define CONFIG_PWM -#define CONFIG_VBOOT_HASH -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 -#define CONFIG_VOLUME_BUTTONS -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -/* Host communication */ -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 - -/* Chipset config */ -#define CONFIG_CHIPSET_TIGERLAKE -#define CONFIG_CHIPSET_PP3300_RAIL_FIRST -#define CONFIG_CHIPSET_SLP_S3_L_OVERRIDE -#define CONFIG_CHIPSET_X86_RSMRST_DELAY -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_S0IX -#define CONFIG_POWER_SLEEP_FAILURE_DETECTION -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_BOARD_HAS_RTC_RESET - -/* Common Keyboard Defines */ -#define CONFIG_CMD_KEYBOARD - -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_KEYPAD -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2 -#define CONFIG_PWM_KBLIGHT - -/* Sensors */ -#define CONFIG_TABLET_MODE -#define CONFIG_GMR_TABLET_MODE - -#define CONFIG_MKBP_EVENT -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT -#define CONFIG_ACCEL_INTERRUPTS - -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is in power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) - -/* Sensor console commands */ -#define CONFIG_CMD_ACCELS -#define CONFIG_CMD_ACCEL_INFO - -/* Thermal features */ -#define CONFIG_FANS FAN_CH_COUNT -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_PG_EC_DSW_PWROK -#define CONFIG_THERMISTOR -#define CONFIG_STEINHART_HART_3V3_30K9_47K_4050B -#define CONFIG_THROTTLE_AP -#define CONFIG_CHIPSET_CAN_THROTTLE - -/* Common charger defines */ -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 - -/* - * Hardware based charge ramp is broken in the ISL9241 (b/169350714). - */ -#define CONFIG_CHARGE_RAMP_SW -#define CONFIG_CHARGER_ISL9241 -/* Setting ISL9241 Register Control1 switching frequency to 724kHz. */ -#define CONFIG_ISL9241_SWITCHING_FREQ ISL9241_CONTROL1_SWITCHING_FREQ_724KHZ - -#define CONFIG_USB_CHARGER -#define CONFIG_BC12_DETECT_PI3USB9201 - -/* - * Don't allow the system to boot to S0 when the battery is low and unable to - * communicate on locked systems (which haven't PD negotiated) - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 15001 - -/* Common battery defines */ -#define CONFIG_BATTERY_SMART -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_CUSTOM -#define CONFIG_BATTERY_HW_PRESENT_CUSTOM -#define CONFIG_BATTERY_REVIVE_DISCONNECT - -/* Common LED defines */ -#define CONFIG_LED_COMMON - -/* EDP back-light control defines */ -#define CONFIG_BACKLIGHT_LID -#define GPIO_ENABLE_BACKLIGHT GPIO_EC_EDP_BL_EN - -/* USB Type C and USB PD defines */ -/* Enable the new USB-C PD stack */ -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_DRP_ACC_TRYSRC -#define CONFIG_USB_PD_REV30 - -/* - * TODO(b/158572770): TCPMv2: Conserve flash space - * Add these console commands as flash space permits. - */ -#undef CONFIG_CMD_HCDEBUG -#undef CONFIG_CMD_ACCELS -#undef CONFIG_CMD_ACCEL_INFO -#undef CONFIG_CMD_ACCELSPOOF -#undef CONFIG_CMD_PPC_DUMP - -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_ALT_MODE_UFP -#define CONFIG_USB_PD_DISCHARGE_PPC -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_TCPC_RUNTIME_CONFIG -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TCPM_RT1715 -#define CONFIG_USB_PD_TCPM_TUSB422 /* USBC port C0 */ -#define CONFIG_USB_PD_TCPM_PS8815 /* USBC port USB3 DB */ -#define CONFIG_USB_PD_TCPM_PS8815_FORCE_DID -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_HOSTCMD_PD_CONTROL /* Needed for TCPC FW update */ -#define CONFIG_CMD_USB_PD_PE - -/* - * Because of the CSE Lite, an extra cold AP reset is needed, and older cr50 - * firmware will not be able to detect it because of updated cr50 pin straps. - * Therefore, the AP will require the EC to reset it so that the proper reset - * signal will be read and verstage can execute again. - */ -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_HOSTCMD_AP_RESET - -/* - * The PS8815 TCPC was found to require a 50ms delay to consistently work - * with non-PD chargers. Override the default low-power mode exit delay. - */ -#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE -#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (50*MSEC) - -/* Enable USB3.2 DRD */ -#define CONFIG_USB_PD_USB32_DRD - -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC - -#define CONFIG_USB_MUX_RUNTIME_CONFIG - -#define CONFIG_USBC_PPC -/* Note - SN5S330 support automatically adds - * CONFIG_USBC_PPC_POLARITY - * CONFIG_USBC_PPC_SBU - * CONFIG_USBC_PPC_VCONN - */ -#define CONFIG_USBC_PPC_DEDICATED_INT - -#define CONFIG_USBC_SS_MUX -#define CONFIG_USB_MUX_VIRTUAL - -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP - -/* Enabling SOP* communication */ -#define CONFIG_CMD_USB_PD_CABLE -#define CONFIG_USB_PD_DECODE_SOP - -/* UART COMMAND */ -#define CONFIG_CMD_CHARGEN - -/* - * USB ID - * This is allocated specifically for Volteer - * http://google3/hardware/standards/usb/ - */ -#define CONFIG_USB_PID 0x503E -/* Device version of product. */ -#define CONFIG_USB_BCD_DEV 0x0000 - -/* Retimer */ -#define CONFIG_USBC_RETIMER_INTEL_BB -#define CONFIG_USBC_RETIMER_INTEL_BB_RUNTIME_CONFIG -#define CONFIG_USBC_RETIMER_FW_UPDATE - -/* Enable volume button command in EC console */ -#define CONFIG_CMD_BUTTON - -/* Enable volume button in ectool */ -#define CONFIG_HOSTCMD_BUTTON - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "common.h" -#include "baseboard_usbc_config.h" -#include "cbi.h" - -enum adc_channel { - ADC_TEMP_SENSOR_1_CHARGER, - ADC_TEMP_SENSOR_2_PP3300_REGULATOR, - ADC_TEMP_SENSOR_3_DDR_SOC, - ADC_TEMP_SENSOR_4_FAN, - ADC_CH_COUNT -}; - -enum fan_channel { - FAN_CH_0 = 0, - /* Number of FAN channels */ - FAN_CH_COUNT, -}; - -enum mft_channel { - MFT_CH_0 = 0, - /* Number of MFT channels */ - MFT_CH_COUNT, -}; - -enum temp_sensor_id { - TEMP_SENSOR_1_CHARGER, - TEMP_SENSOR_2_PP3300_REGULATOR, - TEMP_SENSOR_3_DDR_SOC, - TEMP_SENSOR_4_FAN, - TEMP_SENSOR_COUNT -}; - -/* - * Check battery disconnect state. - * This function will return if battery is initialized or not. - * @return true - initialized. false - not. - */ -__override_proto bool board_battery_is_initialized(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/volteer/baseboard_usbc_config.h b/baseboard/volteer/baseboard_usbc_config.h deleted file mode 100644 index bf02b1cb34..0000000000 --- a/baseboard/volteer/baseboard_usbc_config.h +++ /dev/null @@ -1,18 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* volteer family-specific USB-C configuration */ - -#ifndef __CROS_EC_BASEBOARD_USBC_CONFIG_H -#define __CROS_EC_BASEBOARD_USBC_CONFIG_H - -#include "gpio_signal.h" - -/* Common definition for the USB PD interrupt handlers. */ -void ppc_interrupt(enum gpio_signal signal); -void tcpc_alert_event(enum gpio_signal signal); -void bc12_interrupt(enum gpio_signal signal); - -#endif /* __CROS_EC_BASEBOARD_USBC_CONFIG_H */ diff --git a/baseboard/volteer/battery_presence.c b/baseboard/volteer/battery_presence.c deleted file mode 100644 index 4953d7a49e..0000000000 --- a/baseboard/volteer/battery_presence.c +++ /dev/null @@ -1,89 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Common battery presence checking for Volteer family. - * Each board should implement board_battery_info[] to define the specific - * battery packs supported. - */ -#include <stdbool.h> - -#include "battery.h" -#include "battery_smart.h" -#include "gpio.h" - -static enum battery_present batt_pres_prev = BP_NOT_SURE; - -enum battery_present battery_hw_present(void) -{ - /* The GPIO is low when the battery is physically present */ - return gpio_get_level(GPIO_EC_BATT_PRES_ODL) ? BP_NO : BP_YES; -} - -static bool battery_init(void) -{ - int batt_status; - - return battery_status(&batt_status) ? 0 : - !!(batt_status & STATUS_INITIALIZED); -} - -__overridable bool board_battery_is_initialized(void) -{ - /* - * Set default to return true - */ - return true; -} - -/* - * Physical detection of battery. - */ -static enum battery_present battery_check_present_status(void) -{ - enum battery_present batt_pres; - bool batt_initialization_state; - - /* Get the physical hardware status */ - batt_pres = battery_hw_present(); - - /* - * If the battery is not physically connected, then no need to perform - * any more checks. - */ - if (batt_pres != BP_YES) - return batt_pres; - - /* - * If the battery is present now and was present last time we checked, - * return early. - */ - if (batt_pres == batt_pres_prev) - return batt_pres; - - /* - * Check battery initialization. If the battery is not initialized, - * then return BP_NOT_SURE. Battery could be in ship - * mode and might require pre-charge current to wake it up. BP_NO is not - * returned here because charger state machine will not provide - * pre-charge current assuming that battery is not present. - */ - batt_initialization_state = board_battery_is_initialized(); - if (!batt_initialization_state) - return BP_NOT_SURE; - /* - * Ensure that battery is: - * 1. Not in cutoff - * 2. Initialized - */ - if (battery_is_cut_off() || !battery_init()) - batt_pres = BP_NO; - - return batt_pres; -} - -enum battery_present battery_is_present(void) -{ - batt_pres_prev = battery_check_present_status(); - return batt_pres_prev; -} diff --git a/baseboard/volteer/build.mk b/baseboard/volteer/build.mk deleted file mode 100644 index 08b68c5816..0000000000 --- a/baseboard/volteer/build.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -*- makefile -*- -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Volteer baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-y+=battery_presence.o -baseboard-y+=charger.o -baseboard-y+=usb_pd_policy.o -baseboard-y+=cbi.o -baseboard-y+=cbi_ec_fw_config.o -baseboard-y+=cbi_ssfc.o -baseboard-y+=power.o -baseboard-y+=usbc_config.o diff --git a/baseboard/volteer/cbi.c b/baseboard/volteer/cbi.c deleted file mode 100644 index ea446acc4e..0000000000 --- a/baseboard/volteer/cbi.c +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Volteer family-specific functions, shared with Zephyr */ - -#include "cbi_ec_fw_config.h" -#include "common.h" -#include "cros_board_info.h" -#include "hooks.h" -#include "system.h" - -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_CHIPSET, format, ## args) - -static uint8_t board_id; - -uint8_t get_board_id(void) -{ - return board_id; -} - -__overridable void board_cbi_init(void) -{ -} - -/* - * Read CBI from i2c eeprom and initialize variables for board variants - * - * Example for configuring for a USB3 DB: - * ectool cbi set 6 2 4 10 - */ -static void cbi_init(void) -{ - uint32_t cbi_val; - - /* Board ID */ - if (cbi_get_board_version(&cbi_val) != EC_SUCCESS || - cbi_val > UINT8_MAX) - CPRINTS("CBI: Read Board ID failed"); - else - board_id = cbi_val; - - CPRINTS("Board ID: %d", board_id); - - /* FW config */ - init_fw_config(); - - /* Allow the board project to make runtime changes based on CBI data */ - board_cbi_init(); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_FIRST); diff --git a/baseboard/volteer/cbi.h b/baseboard/volteer/cbi.h deleted file mode 100644 index 049c0f65e2..0000000000 --- a/baseboard/volteer/cbi.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Volteer family-specific CBI functions, shared with Zephyr */ - -#ifndef __CROS_EC_BASEBOARD_CBI_H -#define __CROS_EC_BASEBOARD_CBI_H - -unsigned char get_board_id(void); - -/** - * Configure run-time data structures and operation based on CBI data. This - * typically includes customization for changes in the BOARD_VERSION and - * FW_CONFIG fields in CBI. This routine is called from the baseboard after - * the CBI data has been initialized. - */ -__override_proto void board_cbi_init(void); - -#endif /* __CROS_EC_BASEBOARD_CBI_H */ diff --git a/baseboard/volteer/cbi_ec_fw_config.c b/baseboard/volteer/cbi_ec_fw_config.c deleted file mode 100644 index e602691aeb..0000000000 --- a/baseboard/volteer/cbi_ec_fw_config.c +++ /dev/null @@ -1,55 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "console.h" -#include "cbi_ec_fw_config.h" -#include "cros_board_info.h" - -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) - -static union volteer_cbi_fw_config fw_config; -BUILD_ASSERT(sizeof(fw_config) == sizeof(uint32_t)); - -/**************************************************************************** - * Volteer FW_CONFIG access - */ -void init_fw_config(void) -{ - if (cbi_get_fw_config(&fw_config.raw_value)) { - CPRINTS("CBI: Read FW_CONFIG failed, using board defaults"); - fw_config = fw_config_defaults; - } -} - -union volteer_cbi_fw_config get_fw_config(void) -{ - return fw_config; -} - -enum ec_cfg_usb_db_type ec_cfg_usb_db_type(void) -{ - return fw_config.usb_db; -} - -bool ec_cfg_has_tabletmode(void) -{ - return (fw_config.tabletmode == TABLETMODE_ENABLED); -} - -bool ec_cfg_has_keyboard_backlight(void) -{ - return (fw_config.kb_bl == KEYBOARD_BACKLIGHT_ENABLED); -} - -bool ec_cfg_has_numeric_pad(void) -{ - return (fw_config.num_pad == NUMERIC_PAD_ENABLED); -} - -enum ec_cfg_keyboard_layout ec_cfg_keyboard_layout(void) -{ - return fw_config.kb_layout; -} diff --git a/baseboard/volteer/cbi_ec_fw_config.h b/baseboard/volteer/cbi_ec_fw_config.h deleted file mode 100644 index 0a44e1f9e4..0000000000 --- a/baseboard/volteer/cbi_ec_fw_config.h +++ /dev/null @@ -1,124 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __VOLTEER_CBI_EC_FW_CONFIG_H_ -#define __VOLTEER_CBI_EC_FW_CONFIG_H_ - -#include "stdbool.h" -#include "stdint.h" - -/**************************************************************************** - * CBI FW_CONFIG layout shared by all Volteer boards - * - * Source of truth is the program/volteer/program.star configuration file. - */ - -enum ec_cfg_usb_db_type { - DB_USB_ABSENT = 0, - DB_USB4_GEN2 = 1, - DB_USB3_ACTIVE = 2, - DB_USB4_GEN3 = 3, - DB_USB3_PASSIVE = 4, - DB_USB3_NO_A = 5, - DB_USB_COUNT -}; - -/* - * Tablet Mode (1 bit), shared by all Volteer boards - */ -enum ec_cfg_tabletmode_type { - TABLETMODE_DISABLED = 0, - TABLETMODE_ENABLED = 1, -}; - -enum ec_cfg_keyboard_backlight_type { - KEYBOARD_BACKLIGHT_DISABLED = 0, - KEYBOARD_BACKLIGHT_ENABLED = 1 -}; - -enum ec_cfg_numeric_pad_type { - NUMERIC_PAD_DISABLED = 0, - NUMERIC_PAD_ENABLED = 1 -}; - -enum ec_cfg_keyboard_layout { - KB_LAYOUT_DEFAULT = 0, - KB_LAYOUT_1 = 1 -}; - -union volteer_cbi_fw_config { - struct { - enum ec_cfg_usb_db_type usb_db : 4; - uint32_t thermal : 4; - uint32_t audio : 3; - enum ec_cfg_tabletmode_type tabletmode : 1; - uint32_t lte_db : 2; - enum ec_cfg_keyboard_backlight_type kb_bl : 1; - enum ec_cfg_numeric_pad_type num_pad : 1; - uint32_t sd_db : 4; - enum ec_cfg_keyboard_layout kb_layout : 2; - uint32_t reserved_2 : 10; - }; - uint32_t raw_value; -}; - -/* - * Each Volteer board must define the default FW_CONFIG options to use - * if the CBI data has not been initialized. - */ -extern union volteer_cbi_fw_config fw_config_defaults; - -/** - * Initialize the FW_CONFIG from CBI data. If the CBI data is not valid, set the - * FW_CONFIG to the board specific defaults. - */ -void init_fw_config(void); - -/** - * Read the cached FW_CONFIG. Guaranteed to have valid values. - * - * @return the FW_CONFIG for the board. - */ -union volteer_cbi_fw_config get_fw_config(void); - -/** - * Get the USB daughter board type from FW_CONFIG. - * - * @return the USB daughter board type. - */ -enum ec_cfg_usb_db_type ec_cfg_usb_db_type(void); - -/** - * Check if the FW_CONFIG has enabled tablet mode operation. - * - * @return true if board supports tablet mode, false if the board supports - * clamshell operation only. - */ -bool ec_cfg_has_tabletmode(void); - -/** - * Check if the FW_CONFIG has enabled keyboard backlight. - * - * @return true if board supports keyboard backlight, false if the board - * doesn't support it. - */ -bool ec_cfg_has_keyboard_backlight(void); - -/** - * Check if the FW_CONFIG has enabled numeric pad. - * - * @return true if board supports numeric pad, false if the board - * doesn't support it. - */ -bool ec_cfg_has_numeric_pad(void); - -/** - * Get keyboard type from FW_CONFIG. - * - * @return the keyboard type. - */ -enum ec_cfg_keyboard_layout ec_cfg_keyboard_layout(void); - -#endif /* __VOLTEER_CBI_EC_FW_CONFIG_H_ */ diff --git a/baseboard/volteer/cbi_ssfc.c b/baseboard/volteer/cbi_ssfc.c deleted file mode 100644 index 42b11c4a1c..0000000000 --- a/baseboard/volteer/cbi_ssfc.c +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "cbi_ssfc.h" -#include "common.h" -#include "console.h" -#include "cros_board_info.h" -#include "hooks.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ##args) - -/* Cache SSFC on init since we don't expect it to change in runtime */ -static union volteer_cbi_ssfc cached_ssfc; -BUILD_ASSERT(sizeof(cached_ssfc) == sizeof(uint32_t)); - -static void cbi_ssfc_init(void) -{ - if (cbi_get_ssfc(&cached_ssfc.raw_value) != EC_SUCCESS) - /* Default to 0 when CBI isn't populated */ - cached_ssfc.raw_value = 0; - - CPRINTS("Read CBI SSFC : 0x%04X", cached_ssfc.raw_value); -} -DECLARE_HOOK(HOOK_INIT, cbi_ssfc_init, HOOK_PRIO_FIRST); - -enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void) -{ - return cached_ssfc.base_sensor; -} - -enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void) -{ - return cached_ssfc.lid_sensor; -} - -enum ec_ssfc_lightbar get_cbi_ssfc_lightbar(void) -{ - return cached_ssfc.lightbar; -} diff --git a/baseboard/volteer/cbi_ssfc.h b/baseboard/volteer/cbi_ssfc.h deleted file mode 100644 index 27db1d3809..0000000000 --- a/baseboard/volteer/cbi_ssfc.h +++ /dev/null @@ -1,73 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef _VOLTEER_CBI_SSFC__H_ -#define _VOLTEER_CBI_SSFC__H_ - -#include "stdint.h" - -/**************************************************************************** - * Volteer CBI Second Source Factory Cache - */ - -/* - * Base Sensor (Bits 0-2) - */ -enum ec_ssfc_base_sensor { - SSFC_SENSOR_BASE_DEFAULT = 0, - SSFC_SENSOR_BASE_BMI160 = 1, - SSFC_SENSOR_BASE_ICM426XX = 2 -}; - -/* - * Lid Sensor (Bits 3-5) - */ -enum ec_ssfc_lid_sensor { - SSFC_SENSOR_LID_DEFAULT = 0, - SSFC_SENSOR_LID_BMA255 = 1, - SSFC_SENSOR_LID_KX022 = 2 -}; - -/* - * Lightbar (Bits 6-7) - */ -enum ec_ssfc_lightbar { - SSFC_LIGHTBAR_NONE = 0, - SSFC_LIGHTBAR_10_LED = 1, - SSFC_LIGHTBAR_12_LED = 2 -}; - -union volteer_cbi_ssfc { - struct { - enum ec_ssfc_base_sensor base_sensor : 3; - enum ec_ssfc_lid_sensor lid_sensor : 3; - enum ec_ssfc_lightbar lightbar : 2; - uint32_t reserved_2 : 24; - }; - uint32_t raw_value; -}; - -/** - * Get the Base sensor type from SSFC_CONFIG. - * - * @return the Base sensor board type. - */ -enum ec_ssfc_base_sensor get_cbi_ssfc_base_sensor(void); - -/** - * Get the Lid sensor type from SSFC_CONFIG. - * - * @return the Lid sensor board type. - */ -enum ec_ssfc_lid_sensor get_cbi_ssfc_lid_sensor(void); - -/** - * Get lightbar type from SSFC_CONFIG. - * - * @return the lightbar type. - */ -enum ec_ssfc_lightbar get_cbi_ssfc_lightbar(void); - -#endif /* _Volteer_CBI_SSFC__H_ */ diff --git a/baseboard/volteer/charger.c b/baseboard/volteer/charger.c deleted file mode 100644 index a674b98f41..0000000000 --- a/baseboard/volteer/charger.c +++ /dev/null @@ -1,104 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Volteer family-specific configuration */ -#include "common.h" -#include "charger.h" -#include "charge_manager.h" -#include "charge_state.h" -#include "driver/charger/isl9241_public.h" -#include "gpio.h" -#ifdef CONFIG_ZEPHYR -#include "usbc_config.h" -#endif -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -/* Charger Chip Configuration */ -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL9241_ADDR_FLAGS, - .drv = &isl9241_drv, - }, -}; - -int board_set_active_charge_port(int port) -{ - int is_valid_port = (port >= 0 && - port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - - if (port == CHARGE_PORT_NONE) { - CPRINTSUSB("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } else if (!is_valid_port) { - return EC_ERROR_INVAL; - } - - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTFUSB("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTSUSB("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTSUSB("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -__overridable void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} - -void board_overcurrent_event(int port, int is_overcurrented) -{ - /* Note that the level is inverted because the pin is active low. */ - switch (port) { - case USBC_PORT_C0: - gpio_set_level(GPIO_USB_C0_OC_ODL, !is_overcurrented); - break; - case USBC_PORT_C1: - gpio_set_level(GPIO_USB_C1_OC_ODL, !is_overcurrented); - break; - } -} diff --git a/baseboard/volteer/power.c b/baseboard/volteer/power.c deleted file mode 100644 index fa20cfa93f..0000000000 --- a/baseboard/volteer/power.c +++ /dev/null @@ -1,56 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "gpio.h" -#include "hooks.h" -#include "power/icelake.h" - -/* - * PWROK signal configuration, see the PWROK Generation Flow Diagram (Figure - * 235) in the Tiger Lake Platform Design Guide for the list of potential - * signals. - * - * Volteer uses this power sequence: - * GPIO_EN_PPVAR_VCCIN - Turns on the VCCIN rail. Also used as a delay to - * the VCCST_PWRGD input to the AP so this signal must be delayed - * 5 ms to meet the tCPU00 timing requirement. - * GPIO_EC_PCH_SYS_PWROK - Asserts the SYS_PWROK input to the AP. Delayed - * a total of 50 ms after ALL_SYS_PWRGD input is asserted. See - * b/144478941 for full discussion. - * - * Volteer does not provide direct EC control for the VCCST_PWRGD and PCH_PWROK - * signals. If your board adds these signals to the EC, copy this array - * to your board.c file and modify as needed. - */ -const struct intel_x86_pwrok_signal pwrok_signal_assert_list[] = { - { - .gpio = GPIO_EN_PPVAR_VCCIN, - .delay_ms = 5, - }, - { - .gpio = GPIO_EC_PCH_SYS_PWROK, - .delay_ms = 50 - 5, - }, -}; -const int pwrok_signal_assert_count = ARRAY_SIZE(pwrok_signal_assert_list); - -const struct intel_x86_pwrok_signal pwrok_signal_deassert_list[] = { - /* No delays needed during S0 exit */ - { - .gpio = GPIO_EC_PCH_SYS_PWROK, - }, - /* Turn off VCCIN last */ - { - .gpio = GPIO_EN_PPVAR_VCCIN, - }, -}; -const int pwrok_signal_deassert_count = ARRAY_SIZE(pwrok_signal_deassert_list); - -static void baseboard_init(void) -{ - /* Enable monitoring of the PROCHOT input to the EC */ - gpio_enable_interrupt(GPIO_EC_PROCHOT_IN_L); -} -DECLARE_HOOK(HOOK_INIT, baseboard_init, HOOK_PRIO_DEFAULT); diff --git a/baseboard/volteer/usb_pd_policy.c b/baseboard/volteer/usb_pd_policy.c deleted file mode 100644 index f939998b3d..0000000000 --- a/baseboard/volteer/usb_pd_policy.c +++ /dev/null @@ -1,201 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ -/* Shared USB-C policy for Volteer boards */ -#include "charge_manager.h" -#include "chipset.h" -#include "compile_time_macros.h" -#include "console.h" -#include "gpio.h" -#include "usb_common.h" -#include "usb_mux.h" -#include "usbc_ppc.h" -#include "usb_pd.h" -#include "system.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* Only allow vconn swap if pp5000_A rail is enabled */ - return gpio_get_level(GPIO_EN_PP5000_A); -} - -void pd_power_supply_reset(int port) -{ - int prev_en; - - prev_en = ppc_is_sourcing_vbus(port); - - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (prev_en) - pd_set_vbus_discharge(port, 1); - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -#ifdef CONFIG_USB_PD_VBUS_DETECT_PPC -int pd_snk_is_vbus_provided(int port) -{ - return ppc_is_vbus_present(port); -} -#endif /* defined(CONFIG_USB_PD_VBUS_DETECT_PPC) */ - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} - -/* ----------------- Vendor Defined Messages ------------------ */ -/* Responses specifically for the enablement of TBT mode in the role of UFP */ - -#define OPOS_TBT 1 - -static const union tbt_mode_resp_device vdo_tbt_modes[1] = { - { - .tbt_alt_mode = 0x0001, - .tbt_adapter = TBT_ADAPTER_TBT3, - .intel_spec_b0 = 0, - .vendor_spec_b0 = 0, - .vendor_spec_b1 = 0, - } -}; - -static const uint32_t vdo_idh = VDO_IDH( - 1, /* Data caps as USB host */ - 0, /* Not a USB device */ - IDH_PTYPE_PERIPH, - 1, /* Supports alt modes */ - USB_VID_GOOGLE); - -static const uint32_t vdo_idh_rev30 = VDO_IDH_REV30( - 1, /* Data caps as USB host */ - 0, /* Not a USB device */ - IDH_PTYPE_PERIPH, - 1, /* Supports alt modes */ - IDH_PTYPE_DFP_HOST, - USB_TYPEC_RECEPTACLE, - USB_VID_GOOGLE); - -static const uint32_t vdo_product = VDO_PRODUCT( - CONFIG_USB_PID, CONFIG_USB_BCD_DEV); - -/* TODO(b/168890624): add USB4 to capability once USB4 response implemented */ -static const uint32_t vdo_ufp1 = VDO_UFP1( - (VDO_UFP1_CAPABILITY_USB20 - | VDO_UFP1_CAPABILITY_USB32), - USB_TYPEC_RECEPTACLE, - VDO_UFP1_ALT_MODE_TBT3, - USB_R30_SS_U40_GEN3); - -static const uint32_t vdo_dfp = VDO_DFP( - (VDO_DFP_HOST_CAPABILITY_USB20 - | VDO_DFP_HOST_CAPABILITY_USB32 - | VDO_DFP_HOST_CAPABILITY_USB4), - USB_TYPEC_RECEPTACLE, - 1 /* Port 1 */); - -static int svdm_tbt_compat_response_identity(int port, uint32_t *payload) -{ - /* TODO(b/154962766): Get an XID */ - payload[VDO_I(CSTAT)] = VDO_CSTAT(0); - payload[VDO_I(PRODUCT)] = vdo_product; - - if (pd_get_rev(port, TCPCI_MSG_SOP) == PD_REV30) { - /* PD Revision 3.0 */ - payload[VDO_I(IDH)] = vdo_idh_rev30; - payload[VDO_I(PTYPE_UFP1_VDO)] = vdo_ufp1; - /* TODO(b/156749387): Find power number for USB3/4 */ - payload[VDO_I(PTYPE_UFP2_VDO)] = 0; - payload[VDO_I(PTYPE_DFP_VDO)] = vdo_dfp; - return VDO_I(PTYPE_DFP_VDO) + 1; - } - - /* PD Revision 2.0 */ - payload[VDO_I(IDH)] = vdo_idh; - return VDO_I(PRODUCT) + 1; -} - -static int svdm_tbt_compat_response_svids(int port, uint32_t *payload) -{ - payload[1] = VDO_SVID(USB_VID_INTEL, 0); - return 2; -} - -static int svdm_tbt_compat_response_modes(int port, uint32_t *payload) -{ - if (PD_VDO_VID(payload[0]) == USB_VID_INTEL) { - memcpy(payload + 1, vdo_tbt_modes, sizeof(vdo_tbt_modes)); - return ARRAY_SIZE(vdo_tbt_modes) + 1; - } else { - return 0; /* NAK */ - } -} - -static int svdm_tbt_compat_response_enter_mode( - int port, uint32_t *payload) -{ - mux_state_t mux_state = 0; - - /* Do not enter mode while CPU is off. */ - if (chipset_in_or_transitioning_to_state(CHIPSET_STATE_ANY_OFF)) - return 0; /* NAK */ - - if ((PD_VDO_VID(payload[0]) != USB_VID_INTEL) || - (PD_VDO_OPOS(payload[0]) != OPOS_TBT)) - return 0; /* NAK */ - - mux_state = usb_mux_get(port); - /* - * Ref: USB PD 3.0 Spec figure 6-21 Successful Enter Mode sequence - * UFP (responder) should be in USB mode or safe mode before sending - * Enter Mode Command response. - */ - if ((mux_state & USB_PD_MUX_USB_ENABLED) || - (mux_state & USB_PD_MUX_SAFE_MODE)) { - pd_ufp_set_enter_mode(port, payload); - set_tbt_compat_mode_ready(port); - CPRINTS("UFP Enter TBT mode"); - return 1; /* ACK */ - } - - CPRINTS("UFP failed to enter TBT mode(mux=0x%x)", mux_state); - return 0; -} - -const struct svdm_response svdm_rsp = { - .identity = &svdm_tbt_compat_response_identity, - .svids = &svdm_tbt_compat_response_svids, - .modes = &svdm_tbt_compat_response_modes, - .enter_mode = &svdm_tbt_compat_response_enter_mode, - .amode = NULL, - .exit_mode = NULL, -}; diff --git a/baseboard/volteer/usbc_config.c b/baseboard/volteer/usbc_config.c deleted file mode 100644 index 1e483eae34..0000000000 --- a/baseboard/volteer/usbc_config.c +++ /dev/null @@ -1,77 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Volteer family-specific USB-C configuration */ - -#include "common.h" -#include "charge_manager.h" -#include "charge_ramp.h" -#include "charge_state.h" -#include "gpio.h" -#include "task.h" -#ifdef CONFIG_ZEPHYR -#include "usbc_config.h" -#include "baseboard_usbc_config.h" -#endif -#include "usbc_ppc.h" -#include "usb_pd.h" -#include "usb_charge.h" -#include "util.h" -#include "driver/charger/isl9241_public.h" - -/******************************************************************************/ -void tcpc_alert_event(enum gpio_signal signal) -{ - /* TODO: b/140572591 - check correct operation for Volteer */ - - int port = -1; - - switch (signal) { - case GPIO_USB_C0_TCPC_INT_ODL: - port = USBC_PORT_C0; - break; - case GPIO_USB_C1_TCPC_INT_ODL: - port = USBC_PORT_C1; - break; - default: - return; - } - - schedule_deferred_pd_interrupt(port); -} - -void bc12_interrupt(enum gpio_signal signal) -{ - switch (signal) { - case GPIO_USB_C0_BC12_INT_ODL: - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); - break; - - case GPIO_USB_C1_BC12_INT_ODL: - task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12); - break; - - default: - break; - } -} - -/** - * Return if VBUS is too low - */ -int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state) -{ - int voltage; - - if (charger_get_vbus_voltage(port, &voltage)) - voltage = 0; - - /* - * For legacy BC1.2 charging with CONFIG_CHARGE_RAMP_SW, ramp up input - * current until voltage drops to the minimum input voltage of the - * charger, 4.096V. - */ - return voltage < ISL9241_BC12_MIN_VOLTAGE; -} diff --git a/baseboard/zork/analyzestack.yaml b/baseboard/zork/analyzestack.yaml deleted file mode 100644 index 7ff5f39644..0000000000 --- a/baseboard/zork/analyzestack.yaml +++ /dev/null @@ -1,2 +0,0 @@ -remove: -- panic_assert_fail diff --git a/baseboard/zork/baseboard.c b/baseboard/zork/baseboard.c deleted file mode 100644 index 0b48d1075b..0000000000 --- a/baseboard/zork/baseboard.c +++ /dev/null @@ -1,360 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Zork family-specific configuration */ - -#include "adc.h" -#include "button.h" -#include "cbi_ec_fw_config.h" -#include "charge_manager.h" -#include "charge_ramp.h" -#include "charge_state.h" -#include "charge_state_v2.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "cros_board_info.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/charger/isl9241.h" -#include "driver/retimer/pi3hdx1204.h" -#include "driver/usb_mux/amd_fp5.h" -#include "ec_commands.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "ioexpander.h" -#include "i2c.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "registers.h" -#include "switch.h" -#include "system.h" -#include "task.h" -#include "tcpm/tcpci.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "util.h" - -#define SAFE_RESET_VBUS_MV 5000 - -/* - * For legacy BC1.2 charging with CONFIG_CHARGE_RAMP_SW, ramp up input current - * until voltage drops to 4.5V. Don't go lower than this to be kind to the - * charger (see b/67964166). - */ -#define BC12_MIN_VOLTAGE 4500 - -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, - GPIO_EC_RST_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* - * In the AOZ1380 PPC, there are no programmable features. We use - * the attached NCT3807 to control a GPIO to indicate 1A5 or 3A0 - * current limits. - */ -__overridable int board_aoz1380_set_vbus_source_current_limit(int port, - enum tcpc_rp_value rp) -{ - int rv; - - /* Use the TCPC to set the current limit */ - rv = ioex_set_level(IOEX_USB_C0_PPC_ILIM_3A_EN, - (rp == TYPEC_RP_3A0) ? 1 : 0); - - return rv; -} - -static void baseboard_chipset_suspend(void) -{ - /* Disable display and keyboard backlights. */ - gpio_set_level(GPIO_ENABLE_BACKLIGHT_L, 1); - ioex_set_level(IOEX_KB_BL_EN, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, baseboard_chipset_suspend, - HOOK_PRIO_DEFAULT); - -static void baseboard_chipset_resume(void) -{ - /* Enable display and keyboard backlights. */ - gpio_set_level(GPIO_ENABLE_BACKLIGHT_L, 0); - ioex_set_level(IOEX_KB_BL_EN, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, baseboard_chipset_resume, HOOK_PRIO_DEFAULT); - -__overridable void board_set_charge_limit(int port, int supplier, int charge_ma, - int max_ma, int charge_mv) -{ - charge_set_input_current_limit(MAX(charge_ma, - CONFIG_CHARGER_INPUT_CURRENT), - charge_mv); -} - -/* Keyboard scan setting */ -__override struct keyboard_scan_config keyscan_config = { - /* - * F3 key scan cycle completed but scan input is not - * charging to logic high when EC start scan next - * column for "T" key, so we set .output_settle_us - * to 80us - */ - .output_settle_us = 80, - .debounce_down_us = 6 * MSEC, - .debounce_up_us = 30 * MSEC, - .scan_period_us = 1500, - .min_post_scan_delay_us = 1000, - .poll_timeout_us = SECOND, - .actual_key_mask = { - 0x3c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, - 0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */ - }, -}; - -/* - * We use 11 as the scaling factor so that the maximum mV value below (2761) - * can be compressed to fit in a uint8_t. - */ -#define THERMISTOR_SCALING_FACTOR 11 - -/* - * Values are calculated from the "Resistance VS. Temperature" table on the - * Murata page for part NCP15WB473F03RC. Vdd=3.3V, R=30.9Kohm. - */ -const struct thermistor_data_pair thermistor_data[] = { - { 2761 / THERMISTOR_SCALING_FACTOR, 0}, - { 2492 / THERMISTOR_SCALING_FACTOR, 10}, - { 2167 / THERMISTOR_SCALING_FACTOR, 20}, - { 1812 / THERMISTOR_SCALING_FACTOR, 30}, - { 1462 / THERMISTOR_SCALING_FACTOR, 40}, - { 1146 / THERMISTOR_SCALING_FACTOR, 50}, - { 878 / THERMISTOR_SCALING_FACTOR, 60}, - { 665 / THERMISTOR_SCALING_FACTOR, 70}, - { 500 / THERMISTOR_SCALING_FACTOR, 80}, - { 434 / THERMISTOR_SCALING_FACTOR, 85}, - { 376 / THERMISTOR_SCALING_FACTOR, 90}, - { 326 / THERMISTOR_SCALING_FACTOR, 95}, - { 283 / THERMISTOR_SCALING_FACTOR, 100} -}; - -const struct thermistor_info thermistor_info = { - .scaling_factor = THERMISTOR_SCALING_FACTOR, - .num_pairs = ARRAY_SIZE(thermistor_data), - .data = thermistor_data, -}; - -__override void lid_angle_peripheral_enable(int enable) -{ - if (ec_config_has_lid_angle_tablet_mode()) { - int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON); - - if (enable) { - keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE); - } else { - /* - * Ensure that the chipset is off before disabling the - * keyboard. When the chipset is on, the EC keeps the - * keyboard enabled and the AP decides whether to - * ignore input devices or not. - */ - if (!chipset_in_s0) - keyboard_scan_enable(0, - KB_SCAN_DISABLE_LID_ANGLE); - } - } -} - -static void cbi_init(void) -{ - uint32_t val; - - if (cbi_get_board_version(&val) == EC_SUCCESS) - ccprints("Board Version: %d (0x%x)", val, val); - else - ccprints("Board Version: not set in cbi"); - - if (cbi_get_sku_id(&val) == EC_SUCCESS) - ccprints("SKU ID: %d (0x%x)", val, val); - else - ccprints("SKU ID: not set in cbi"); - - val = get_cbi_fw_config(); - if (val != UNINITIALIZED_FW_CONFIG) - ccprints("FW Config: %d (0x%x)", val, val); - else - ccprints("FW Config: not set in cbi"); -} -DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); - -/* - * Returns 1 for boards that are convertible into tablet mode, and zero for - * clamshells. - */ -int board_is_lid_angle_tablet_mode(void) -{ - return ec_config_has_lid_angle_tablet_mode(); -} - -__override uint32_t board_override_feature_flags0(uint32_t flags0) -{ - /* - * Remove keyboard backlight feature for devices that don't support it. - */ - if (ec_config_has_pwm_keyboard_backlight() == PWM_KEYBOARD_BACKLIGHT_NO) - return (flags0 & ~EC_FEATURE_MASK_0(EC_FEATURE_PWM_KEYB)); - else - return flags0; -} - -void board_hibernate(void) -{ - int port; - - /* - * If we are charging, then drop the Vbus level down to 5V to ensure - * that we don't get locked out of the 6.8V OVLO for our PPCs in - * dead-battery mode. This is needed when the TCPC/PPC rails go away. - * (b/79218851, b/143778351, b/147007265) - */ - port = charge_manager_get_active_charge_port(); - if (port != CHARGE_PORT_NONE) { - pd_request_source_voltage(port, SAFE_RESET_VBUS_MV); - - /* Give PD task and PPC chip time to get to 5V */ - msleep(900); - } -} - -__overridable int check_hdmi_hpd_status(void) -{ - /* Default hdmi insert. */ - return 1; -} - -void sbu_fault_interrupt(enum ioex_signal signal) -{ - int port = (signal == IOEX_USB_C0_SBU_FAULT_ODL) ? 0 : 1; - - pd_handle_overcurrent(port); -} - -static void set_ac_prochot(void) -{ - isl9241_set_ac_prochot(CHARGER_SOLO, ZORK_AC_PROCHOT_CURRENT_MA); -} -DECLARE_HOOK(HOOK_INIT, set_ac_prochot, HOOK_PRIO_DEFAULT); - -DECLARE_DEFERRED(board_print_temps); -int temps_interval; - -void board_print_temps(void) -{ - int t, i; - int rv; - - cprintf(CC_THERMAL, "[%pT ", PRINTF_TIMESTAMP_NOW); - for (i = 0; i < TEMP_SENSOR_COUNT; ++i) { - rv = temp_sensor_read(i, &t); - if (rv == EC_SUCCESS) - cprintf(CC_THERMAL, "%s=%dK (%dC) ", - temp_sensors[i].name, t, K_TO_C(t)); - } - cprintf(CC_THERMAL, "]\n"); - - if (temps_interval > 0) - hook_call_deferred(&board_print_temps_data, - temps_interval * SECOND); -} - -static int command_temps_log(int argc, char **argv) -{ - char *e = NULL; - - if (argc != 2) - return EC_ERROR_PARAM_COUNT; - - temps_interval = strtoi(argv[1], &e, 0); - if (*e) - return EC_ERROR_PARAM1; - - board_print_temps(); - - return EC_SUCCESS; -} -DECLARE_CONSOLE_COMMAND(tempslog, command_temps_log, - "seconds", - "Print temp sensors periodically"); - -/* - * b/164921478: On G3->S5, wait for RSMRST_L to be deasserted before asserting - * PWRBTN_L. - */ -void board_pwrbtn_to_pch(int level) -{ - /* Add delay for G3 exit if asserting PWRBTN_L and S5_PGOOD is low. */ - if (!level && !gpio_get_level(GPIO_S5_PGOOD)) { - /* - * From measurement, wait 80 ms for RSMRST_L to rise after - * S5_PGOOD. - */ - msleep(80); - - if (!gpio_get_level(GPIO_S5_PGOOD)) - ccprints("Error: pwrbtn S5_PGOOD low"); - } - gpio_set_level(GPIO_PCH_PWRBTN_L, level); -} - -/** - * Return if VBUS is sagging too low - */ -int board_is_vbus_too_low(int port, enum chg_ramp_vbus_state ramp_state) -{ - int voltage = 0; - int rv; - - rv = charger_get_vbus_voltage(port, &voltage); - - if (rv) { - ccprints("%s rv=%d", __func__, rv); - return 0; - } - - /* - * b/168569046: The ISL9241 sometimes incorrectly reports 0 for unknown - * reason, causing ramp to stop at 0.5A. Workaround this by ignoring 0. - * This partly defeats the point of ramping, but will still catch - * VBUS below 4.5V and above 0V. - */ - if (voltage == 0) { - ccprints("%s vbus=0", __func__); - return 0; - } - - if (voltage < BC12_MIN_VOLTAGE) - ccprints("%s vbus=%d", __func__, voltage); - - return voltage < BC12_MIN_VOLTAGE; -} - -/** - * Always ramp up input current since AP needs higher power, even if battery is - * very low or full. We can always re-ramp if input current increases beyond - * what supplier can provide. - */ -__override int charge_is_consuming_full_input_current(void) -{ - return 1; -} diff --git a/baseboard/zork/baseboard.h b/baseboard/zork/baseboard.h deleted file mode 100644 index d84ebbcef8..0000000000 --- a/baseboard/zork/baseboard.h +++ /dev/null @@ -1,368 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Zork baseboard configuration */ - -#ifndef __CROS_EC_BASEBOARD_H -#define __CROS_EC_BASEBOARD_H - -#if (defined(VARIANT_ZORK_TREMBYLE) \ - + defined(VARIANT_ZORK_DALBOZ)) != 1 -#error Must choose VARIANT_ZORK_TREMBYLE or VARIANT_ZORK_DALBOZ -#endif - -/* NPCX7 config */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -#define NPCX_TACH_SEL2 0 /* No tach. */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ - -/* Internal SPI flash on NPCX7 */ -#define CONFIG_FLASH_SIZE_BYTES (512 * 1024) -#define CONFIG_SPI_FLASH_REGS -#define CONFIG_SPI_FLASH_W25Q40 /* Internal SPI flash type. */ - -#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_HOSTCMD) | CC_MASK(CC_LPC))) - -/* - * Enable 1 slot of secure temporary storage to support - * suspend/resume with read/write memory training. - */ -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#define CONFIG_ADC -#define CONFIG_BACKLIGHT_LID -#define CONFIG_BACKLIGHT_LID_ACTIVE_LOW -#define CONFIG_CMD_AP_RESET_LOG -#define CONFIG_CPU_PROCHOT_ACTIVE_LOW -#define CONFIG_HIBERNATE_PSL -#define CONFIG_HOSTCMD_ESPI -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER -#define CONFIG_I2C_UPDATE_IF_CHANGED -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT -#define CONFIG_TEMP_SENSOR -#define CONFIG_THERMISTOR_NCP15WB -#define CONFIG_VBOOT_EFS2 -#define CONFIG_VBOOT_HASH -#define CONFIG_VOLUME_BUTTONS - -/* CBI EEPROM for board version and SKU ID */ -#define CONFIG_CBI_EEPROM -#define CONFIG_BOARD_VERSION_CBI -#define CONFIG_CRC8 - -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_FUEL_GAUGE -#define CONFIG_BATTERY_REVIVE_DISCONNECT -#define CONFIG_BATTERY_SMART -/* - * Enable support for battery hostcmd, supporting longer strings. - * - * Vilboz battery options' model names vary in the 8th character, which is - * truncated in the memory mapped battery info; differentiating them requires - * support for EC_CMD_BATTERY_GET_STATIC version 1. - */ -#define CONFIG_BATTERY_V2 -#define CONFIG_BATTERY_COUNT 1 -#define CONFIG_HOSTCMD_BATTERY_V2 - -#define CONFIG_BC12_DETECT_PI3USB9201 - -#define CONFIG_CHARGER -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_ISL9241 -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -/* - * We would prefer to use CONFIG_CHARGE_RAMP_HW to enable legacy BC1.2 charging - * but that feature of ISL9241 is broken (b/160287056) so we have to use - * CONFIG_CHARGE_RAMP_SW instead. - */ -#define CONFIG_CHARGE_RAMP_SW - -#define CONFIG_CHIPSET_STONEY -#define CONFIG_CHIPSET_CAN_THROTTLE -#define CONFIG_CHIPSET_RESET_HOOK - -#undef CONFIG_EXTPOWER_DEBOUNCE_MS -#define CONFIG_EXTPOWER_DEBOUNCE_MS 200 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_BUTTON_TO_PCH_CUSTOM -#define CONFIG_THROTTLE_AP - -#ifdef VARIANT_ZORK_TREMBYLE - #define CONFIG_FANS FAN_CH_COUNT - #undef CONFIG_FAN_INIT_SPEED - #define CONFIG_FAN_INIT_SPEED 50 -#endif - -#define CONFIG_LED_COMMON -#define CONFIG_CMD_LEDTEST -#define CONFIG_LED_ONOFF_STATES - -/* - * On power-on, H1 releases the EC from reset but then quickly asserts and - * releases the reset a second time. This means the EC sees 2 resets: - * (1) power-on reset, (2) reset-pin reset. This config will - * allow the second reset to be treated as a power-on. - */ -#define CONFIG_BOARD_RESET_AFTER_POWER_ON - -#define CONFIG_IO_EXPANDER -#define CONFIG_IO_EXPANDER_NCT38XX - - -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#undef CONFIG_KEYBOARD_VIVALDI - -/* - * USB ID - * - * This is allocated specifically for Zork - * http://google3/hardware/standards/usb/ - */ -#define CONFIG_USB_PID 0x5040 - -#define CONFIG_USB_PD_REV30 - -/* Enable the TCPMv2 PD stack */ -#define CONFIG_USB_PD_TCPMV2 - -#ifndef CONFIG_USB_PD_TCPMV2 - #define CONFIG_USB_PD_TCPMV1 -#else - #define CONFIG_USB_PD_DECODE_SOP - #define CONFIG_USB_DRP_ACC_TRYSRC - - /* Enable TCPMv2 Fast Role Swap */ - /* Turn off until FRSwap is working */ - #undef CONFIG_USB_PD_FRS_TCPC -#endif - -#define CONFIG_HOSTCMD_PD_CONTROL -#define CONFIG_CMD_TCPC_DUMP -#define CONFIG_USB_CHARGER -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_DISCHARGE_TCPC -#define CONFIG_USB_PD_DP_HPD_GPIO -#ifdef VARIANT_ZORK_TREMBYLE -/* - * Use a custom HPD function that supports HPD on IO expander. - * TODO(b/165622386) remove this when HPD is on EC GPIO. - */ -# define CONFIG_USB_PD_DP_HPD_GPIO_CUSTOM -#endif -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_TCPC_LOW_POWER -#define CONFIG_USB_PD_TCPM_MUX -#define CONFIG_USB_PD_TCPM_NCT38XX -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USBC_PPC -#define CONFIG_USBC_PPC_SBU -#define CONFIG_USBC_PPC_AOZ1380 -#define CONFIG_USBC_RETIMER_PI3HDX1204 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_USB_MUX_AMD_FP5 - -#if defined(VARIANT_ZORK_TREMBYLE) - #define CONFIG_USB_PD_PORT_MAX_COUNT 2 - #define CONFIG_USBC_PPC_NX20P3483 - #define CONFIG_USBC_RETIMER_PS8802 - #define CONFIG_USBC_RETIMER_PS8818 - #define CONFIG_IO_EXPANDER_PORT_COUNT USBC_PORT_COUNT - #define CONFIG_USB_MUX_RUNTIME_CONFIG - /* USB-A config */ - #define GPIO_USB1_ILIM_SEL IOEX_USB_A0_CHARGE_EN_L - #define GPIO_USB2_ILIM_SEL IOEX_USB_A1_CHARGE_EN_DB_L - /* PS8818 RX Input Termination - default value */ - #define ZORK_PS8818_RX_INPUT_TERM PS8818_RX_INPUT_TERM_112_OHM -#elif defined(VARIANT_ZORK_DALBOZ) - #define CONFIG_IO_EXPANDER_PORT_COUNT IOEX_PORT_COUNT -#endif - -/* USB-A config */ -#define USB_PORT_COUNT USBA_PORT_COUNT -#define CONFIG_USB_PORT_POWER_SMART -#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY -#define CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE USB_CHARGE_MODE_CDP -#define CONFIG_USB_PORT_POWER_SMART_INVERTED - -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ - -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 65000 -#define PD_MAX_CURRENT_MA 3250 -#define PD_MAX_VOLTAGE_MV 20000 - -/* Round up 3250 max current to multiple of 128mA for ISL9241 AC prochot. */ -#define ZORK_AC_PROCHOT_CURRENT_MA 3328 - -/* - * EC will boot AP to depthcharge if: (BAT >= 4%) || (AC >= 50W) - * CONFIG_CHARGER_LIMIT_* is not set, so there is no additional restriction on - * Depthcharge to boot OS. - */ -#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 50000 - -/* Increase length of history buffer for port80 messages. */ -#undef CONFIG_PORT80_HISTORY_LEN -#define CONFIG_PORT80_HISTORY_LEN 256 - -/* Increase console output buffer since we have the RAM available. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 4096 - -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_USBA0 NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT1_0 -#define I2C_PORT_USBA1 NPCX_I2C_PORT1_0 -#define I2C_PORT_USB_AP_MUX NPCX_I2C_PORT3_0 -#define I2C_PORT_THERMAL_AP NPCX_I2C_PORT4_1 -#define I2C_PORT_SENSOR NPCX_I2C_PORT5_0 -#define I2C_PORT_ACCEL I2C_PORT_SENSOR -#define I2C_PORT_EEPROM I2C_PORT_SENSOR -#define I2C_PORT_AP_AUDIO NPCX_I2C_PORT6_1 - -#if defined(VARIANT_ZORK_TREMBYLE) - #define CONFIG_CHARGER_RUNTIME_CONFIG - #define I2C_PORT_BATTERY NPCX_I2C_PORT2_0 - #define I2C_PORT_CHARGER_V0 NPCX_I2C_PORT2_0 - #define I2C_PORT_CHARGER_V1 NPCX_I2C_PORT4_1 - #define I2C_PORT_AP_HDMI NPCX_I2C_PORT7_0 -#elif defined(VARIANT_ZORK_DALBOZ) - #define I2C_PORT_BATTERY_V0 NPCX_I2C_PORT2_0 - #define I2C_PORT_BATTERY_V1 NPCX_I2C_PORT7_0 - #define I2C_PORT_CHARGER NPCX_I2C_PORT2_0 -#endif - -#define I2C_ADDR_EEPROM_FLAGS 0x50 - -#define CONFIG_MKBP_EVENT -/* Host event is required to wake from sleep */ -#define CONFIG_MKBP_USE_GPIO_AND_HOST_EVENT -/* Required to enable runtime configuration */ -#define CONFIG_MKBP_EVENT_WAKEUP_MASK (BIT(EC_MKBP_EVENT_DP_ALT_MODE_ENTERED)) - -/* Sensors */ -#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT - -/* Thermal */ -#define CONFIG_TEMP_SENSOR_SB_TSI - -#ifdef HAS_TASK_MOTIONSENSE -/* Enable sensor fifo, must also define the _SIZE and _THRES */ -#define CONFIG_ACCEL_FIFO -/* FIFO size is a power of 2. */ -#define CONFIG_ACCEL_FIFO_SIZE 256 -/* Depends on how fast the AP boots and typical ODRs. */ -#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) -#endif - -/* Audio */ -#define CONFIG_AUDIO_CODEC -#define CONFIG_AUDIO_CODEC_DMIC -#define CONFIG_AUDIO_CODEC_I2S_RX - -/* CLI COMMAND */ -#define CONFIG_CMD_CHARGEN - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "math_util.h" -#include "registers.h" - -enum power_signal { - X86_SLP_S3_N, - X86_SLP_S5_N, - X86_S0_PGOOD, - X86_S5_PGOOD, - POWER_SIGNAL_COUNT -}; - -enum fan_channel { - FAN_CH_0 = 0, - /* Number of FAN channels */ - FAN_CH_COUNT, -}; - -#ifdef VARIANT_ZORK_TREMBYLE -enum usbc_port { - USBC_PORT_C0 = 0, - USBC_PORT_C1, - USBC_PORT_COUNT -}; -#endif - -enum sensor_id { - LID_ACCEL, - BASE_ACCEL, - BASE_GYRO, - SENSOR_COUNT, -}; - -/* - * Matrix to rotate accelerators into the standard reference frame. The default - * is the identity which is correct for the reference design. Variations of - * Zork may need to change it for manufacturability. - * For the lid: - * +x to the right - * +y up - * +z out of the page - * - * The principle axes of the body are aligned with the lid when the lid is in - * the 180 degree position (open, flat). - * - * Boards within the Zork family may need to modify this definition at - * board_init() time. - */ -extern mat33_fp_t zork_base_standard_ref; - -extern const struct thermistor_info thermistor_info; - -/* Sensors without hardware FIFO are in forced mode */ -#define CONFIG_ACCEL_FORCE_MODE_MASK (1 << LID_ACCEL) - -void mst_hpd_interrupt(enum ioex_signal signal); -void sbu_fault_interrupt(enum ioex_signal signal); - -#ifdef VARIANT_ZORK_TREMBYLE -void board_reset_pd_mcu(void); - -/* Common definition for the USB PD interrupt handlers. */ -void tcpc_alert_event(enum gpio_signal signal); -void bc12_interrupt(enum gpio_signal signal); -__override_proto void ppc_interrupt(enum gpio_signal signal); -#endif - -void board_print_temps(void); - -/* GPIO or IOEX signal used to set IN_HPD on DB retimer. */ -extern int board_usbc1_retimer_inhpd; - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BASEBOARD_H */ diff --git a/baseboard/zork/build.mk b/baseboard/zork/build.mk deleted file mode 100644 index e79d60cc91..0000000000 --- a/baseboard/zork/build.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -*- makefile -*- -# Copyright 2019 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# -# Baseboard specific files build -# - -baseboard-y=baseboard.o -baseboard-y+=cbi_ec_fw_config.o -baseboard-y+=cbi_ssfc.o -baseboard-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_policy.o -baseboard-$(VARIANT_ZORK_TREMBYLE)+=variant_trembyle.o -baseboard-$(VARIANT_ZORK_DALBOZ)+=variant_dalboz.o diff --git a/baseboard/zork/cbi_ec_fw_config.c b/baseboard/zork/cbi_ec_fw_config.c deleted file mode 100644 index cbb0821c42..0000000000 --- a/baseboard/zork/cbi_ec_fw_config.c +++ /dev/null @@ -1,98 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "common.h" -#include "cbi_ec_fw_config.h" -#include "cros_board_info.h" - -/**************************************************************************** - * CBI Zork EC FW Configuration - */ -uint32_t get_cbi_fw_config(void) -{ - static uint32_t cached_fw_config = UNINITIALIZED_FW_CONFIG; - - if (cached_fw_config == UNINITIALIZED_FW_CONFIG) { - uint32_t val; - - if (cbi_get_fw_config(&val) == EC_SUCCESS) - cached_fw_config = val; - } - return cached_fw_config; -} - -/* - * get_cbi_ec_cfg_usb_db() will return the DB option number. - */ -enum ec_cfg_usb_db_type ec_config_get_usb_db(void) -{ - return ((get_cbi_fw_config() & EC_CFG_USB_DB_MASK) - >> EC_CFG_USB_DB_L); -} - -/* - * get_cbi_ec_cfg_usb_mb() will return the MB option number. - */ -enum ec_cfg_usb_mb_type ec_config_get_usb_mb(void) -{ - return ((get_cbi_fw_config() & EC_CFG_USB_MB_MASK) - >> EC_CFG_USB_MB_L); -} - -/* - * ec_config_has_lid_accel_sensor() will return ec_cfg_lid_accel_sensor_type - */ -enum ec_cfg_lid_accel_sensor_type ec_config_has_lid_accel_sensor(void) -{ - return ((get_cbi_fw_config() & EC_CFG_LID_ACCEL_SENSOR_MASK) - >> EC_CFG_LID_ACCEL_SENSOR_L); -} - -/* - * ec_config_has_base_gyro_sensor() will return ec_cfg_base_gyro_sensor_type - */ -enum ec_cfg_base_gyro_sensor_type ec_config_has_base_gyro_sensor(void) -{ - return ((get_cbi_fw_config() & EC_CFG_BASE_GYRO_SENSOR_MASK) - >> EC_CFG_BASE_GYRO_SENSOR_L); -} - -/* - * ec_config_has_pwm_keyboard_backlight() will return 1 is present or 0 - */ -enum ec_cfg_pwm_keyboard_backlight_type ec_config_has_pwm_keyboard_backlight( - void) -{ - return ((get_cbi_fw_config() & EC_CFG_PWM_KEYBOARD_BACKLIGHT_MASK) - >> EC_CFG_PWM_KEYBOARD_BACKLIGHT_L); -} - -/* - * ec_config_has_lid_angle_tablet_mode() will return 1 is present or 0 - */ -enum ec_cfg_lid_angle_tablet_mode_type ec_config_has_lid_angle_tablet_mode( - void) -{ - return ((get_cbi_fw_config() & EC_CFG_LID_ANGLE_TABLET_MODE_MASK) - >> EC_CFG_LID_ANGLE_TABLET_MODE_L); -} - -/* - * ec_config_lte_present() will return 1 if present else 0. - */ -enum ec_cfg_lte_present_type ec_config_lte_present(void) -{ - return ((get_cbi_fw_config() & EC_CFG_LTE_PRESENT_MASK) - >> EC_CFG_LTE_PRESENT_L); -} - -/* - * ec_config_keyboard_layout() will return keyboard layout type. - */ -enum ec_cfg_keyboard_layout_type ec_config_keyboard_layout(void) -{ - return ((get_cbi_fw_config() & EC_CFG_KEYBOARD_LAYOUT_MASK) - >> EC_CFG_KEYBOARD_LAYOUT_L); -} diff --git a/baseboard/zork/cbi_ec_fw_config.h b/baseboard/zork/cbi_ec_fw_config.h deleted file mode 100644 index 4888298e3a..0000000000 --- a/baseboard/zork/cbi_ec_fw_config.h +++ /dev/null @@ -1,144 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef _ZORK_CBI_EC_FW_CONFIG__H_ -#define _ZORK_CBI_EC_FW_CONFIG__H_ - -/**************************************************************************** - * CBI Zork EC FW Configuration - */ -#define UNINITIALIZED_FW_CONFIG 0xFFFFFFFF - -/* - * USB Daughter Board (4 bits) - * - * get_cbi_ec_cfg_usb_db() will return the DB option number. - * The option number will be defined in a variant or board level enumeration - */ -#define EC_CFG_USB_DB_L 0 -#define EC_CFG_USB_DB_H 3 -#define EC_CFG_USB_DB_MASK \ - GENMASK(EC_CFG_USB_DB_H,\ - EC_CFG_USB_DB_L) - -/* - * USB Main Board (4 bits) - * - * get_cbi_ec_cfg_usb_mb() will return the MB option number. - * The option number will be defined in a variant or board level enumeration - */ -#define EC_CFG_USB_MB_L 4 -#define EC_CFG_USB_MB_H 7 -#define EC_CFG_USB_MB_MASK \ - GENMASK(EC_CFG_USB_MB_H,\ - EC_CFG_USB_MB_L) - -/* - * Lid Accelerometer Sensor (3 bits) - * - * ec_config_has_lid_accel_sensor() will return ec_cfg_lid_accel_sensor_type - */ -enum ec_cfg_lid_accel_sensor_type { - LID_ACCEL_NONE = 0, - LID_ACCEL_KX022 = 1, - LID_ACCEL_LIS2DWL = 2, -}; -#define EC_CFG_LID_ACCEL_SENSOR_L 8 -#define EC_CFG_LID_ACCEL_SENSOR_H 10 -#define EC_CFG_LID_ACCEL_SENSOR_MASK \ - GENMASK(EC_CFG_LID_ACCEL_SENSOR_H,\ - EC_CFG_LID_ACCEL_SENSOR_L) - -/* - * Base Gyro Sensor (3 bits) - * - * ec_config_has_base_gyro_sensor() will return ec_cfg_base_gyro_sensor_type - */ -enum ec_cfg_base_gyro_sensor_type { - BASE_GYRO_NONE = 0, - BASE_GYRO_BMI160 = 1, - BASE_GYRO_LSM6DSM = 2, - BASE_GYRO_ICM426XX = 3, -}; -#define EC_CFG_BASE_GYRO_SENSOR_L 11 -#define EC_CFG_BASE_GYRO_SENSOR_H 13 -#define EC_CFG_BASE_GYRO_SENSOR_MASK \ - GENMASK(EC_CFG_BASE_GYRO_SENSOR_H,\ - EC_CFG_BASE_GYRO_SENSOR_L) - -/* - * PWM Keyboard Backlight (1 bit) - * - * ec_config_has_pwm_keyboard_backlight() will return 1 is present or 0 - */ -enum ec_cfg_pwm_keyboard_backlight_type { - PWM_KEYBOARD_BACKLIGHT_NO = 0, - PWM_KEYBOARD_BACKLIGHT_YES = 1, -}; -#define EC_CFG_PWM_KEYBOARD_BACKLIGHT_L 14 -#define EC_CFG_PWM_KEYBOARD_BACKLIGHT_H 14 -#define EC_CFG_PWM_KEYBOARD_BACKLIGHT_MASK \ - GENMASK(EC_CFG_PWM_KEYBOARD_BACKLIGHT_H,\ - EC_CFG_PWM_KEYBOARD_BACKLIGHT_L) - -/* - * Lid Angle Tablet Mode (1 bit) - * - * ec_config_has_lid_angle_tablet_mode() will return 1 is present or 0 - */ -enum ec_cfg_lid_angle_tablet_mode_type { - LID_ANGLE_TABLET_MODE_NO = 0, - LID_ANGLE_TABLET_MODE_YES = 1, -}; -#define EC_CFG_LID_ANGLE_TABLET_MODE_L 15 -#define EC_CFG_LID_ANGLE_TABLET_MODE_H 15 -#define EC_CFG_LID_ANGLE_TABLET_MODE_MASK \ - GENMASK(EC_CFG_LID_ANGLE_TABLET_MODE_H,\ - EC_CFG_LID_ANGLE_TABLET_MODE_L) - -/* - * LTE Modem Present (1 bit) - * - * ec_config_lte_present() will return 1 if present else 0. - */ -enum ec_cfg_lte_present_type { - LTE_NONE = 0, - LTE_PRESENT = 1, -}; -#define EC_CFG_LTE_PRESENT_L 29 -#define EC_CFG_LTE_PRESENT_H 29 -#define EC_CFG_LTE_PRESENT_MASK \ - GENMASK(EC_CFG_LTE_PRESENT_H,\ - EC_CFG_LTE_PRESENT_L) - -/* - * Keyboard Layout (2 bit) - * - * ec_config_keyboard_layout() will return keyboard layout type. - */ -enum ec_cfg_keyboard_layout_type { - KB_LAYOUT_DEFAULT = 0, - KB_LAYOUT_1 = 1, -}; -#define EC_CFG_KEYBOARD_LAYOUT_L 30 -#define EC_CFG_KEYBOARD_LAYOUT_H 31 -#define EC_CFG_KEYBOARD_LAYOUT_MASK \ - GENMASK(EC_CFG_KEYBOARD_LAYOUT_H,\ - EC_CFG_KEYBOARD_LAYOUT_L) - - -uint32_t get_cbi_fw_config(void); -enum ec_cfg_usb_db_type ec_config_get_usb_db(void); -enum ec_cfg_usb_mb_type ec_config_get_usb_mb(void); -enum ec_cfg_lid_accel_sensor_type ec_config_has_lid_accel_sensor(void); -enum ec_cfg_base_gyro_sensor_type ec_config_has_base_gyro_sensor(void); -enum ec_cfg_pwm_keyboard_backlight_type ec_config_has_pwm_keyboard_backlight( - void); -enum ec_cfg_lid_angle_tablet_mode_type ec_config_has_lid_angle_tablet_mode( - void); -enum ec_cfg_lte_present_type ec_config_lte_present(void); -enum ec_cfg_keyboard_layout_type ec_config_keyboard_layout(void); - -#endif /* _ZORK_CBI_EC_FW_CONFIG__H_ */ diff --git a/baseboard/zork/cbi_ssfc.c b/baseboard/zork/cbi_ssfc.c deleted file mode 100644 index 1078ec6486..0000000000 --- a/baseboard/zork/cbi_ssfc.c +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "cbi_ssfc.h" -#include "common.h" -#include "console.h" -#include "cros_board_info.h" -#include "hooks.h" - -#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ##args) - -/* Cache SSFC on init since we don't expect it to change in runtime */ -static uint32_t cached_ssfc; - -static void cbi_ssfc_init(void) -{ - if (cbi_get_ssfc(&cached_ssfc) != EC_SUCCESS) - /* Default to 0 when CBI isn't populated */ - cached_ssfc = 0; - - CPRINTS("Read CBI SSFC : 0x%04X", cached_ssfc); -} -DECLARE_HOOK(HOOK_INIT, cbi_ssfc_init, HOOK_PRIO_FIRST); - -enum ec_ssfc_base_gyro_sensor get_cbi_ssfc_base_sensor(void) -{ - return (cached_ssfc & SSFC_BASE_GYRO_MASK) >> SSFC_BASE_GYRO_OFFSET; -} - -enum ec_ssfc_spkr_auto_mode get_cbi_ssfc_spkr_auto_mode(void) -{ - return (cached_ssfc & SSFC_SPKR_AUTO_MODE_MASK) >> - SSFC_SPKR_AUTO_MODE_OFFSET; -} - -enum ec_ssfc_edp_phy_alt_tuning get_cbi_ssfc_edp_phy_alt_tuning(void) -{ - return (cached_ssfc & SSFC_EDP_PHY_ALT_TUNING_MASK) >> - SSFC_EDP_PHY_ALT_TUNING_OFFSET; -} - -enum ec_ssfc_c1_mux get_cbi_ssfc_c1_mux(void) -{ - return (cached_ssfc & SSFC_C1_MUX_MASK) >> - SSFC_C1_MUX_OFFSET; -} diff --git a/baseboard/zork/cbi_ssfc.h b/baseboard/zork/cbi_ssfc.h deleted file mode 100644 index c51d612a06..0000000000 --- a/baseboard/zork/cbi_ssfc.h +++ /dev/null @@ -1,79 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef _ZORK_CBI_SSFC__H_ -#define _ZORK_CBI_SSFC__H_ - -#include "stdint.h" - -/**************************************************************************** - * Zork CBI Second Source Factory Cache - */ - -/* - * Base Sensor (Bits 0-2) - */ -enum ec_ssfc_base_gyro_sensor { - SSFC_BASE_GYRO_NONE = 0, - SSFC_BASE_GYRO_BMI160 = 1, - SSFC_BASE_GYRO_LSM6DSM = 2, - SSFC_BASE_GYRO_ICM426XX = 3, -}; -#define SSFC_BASE_GYRO_OFFSET 0 -#define SSFC_BASE_GYRO_MASK GENMASK(2, 0) - -enum ec_ssfc_spkr_auto_mode { - SSFC_SPKR_AUTO_MODE_OFF = 0, - SSFC_SPKR_AUTO_MODE_ON = 1, -}; -#define SSFC_SPKR_AUTO_MODE_OFFSET 3 -#define SSFC_SPKR_AUTO_MODE_MASK GENMASK(3, 3) - -/* - * eDP PHY Alternate Tuning (Bits 4-5) - */ -enum ec_ssfc_edp_phy_alt_tuning { - SSFC_EDP_PHY_ALT_TUNING_0 = 0, - SSFC_EDP_PHY_ALT_TUNING_1 = 1, - SSFC_EDP_PHY_ALT_TUNING_2 = 2, - SSFC_EDP_PHY_ALT_TUNING_3 = 3, -}; -#define SSFC_EDP_PHY_ALT_TUNING_OFFSET 4 -#define SSFC_EDP_PHY_ALT_TUNING_MASK GENMASK(5, 4) - -/* - * TypeC port 1 secondary MUX (Bits 6-7) - */ -enum ec_ssfc_c1_mux { - SSFC_C1_MUX_NONE = 0, - SSFC_C1_MUX_TUSB544 = 1, - SSFC_C1_MUX_PS8818 = 2, -}; -#define SSFC_C1_MUX_OFFSET 6 -#define SSFC_C1_MUX_MASK GENMASK(7, 6) - -/** - * Get the Base sensor type from SSFC_CONFIG. - * - * @return the Base sensor board type. - */ -enum ec_ssfc_base_gyro_sensor get_cbi_ssfc_base_sensor(void); - -/** - * Get whether speaker amp auto mode is enabled from SSFC. - */ -enum ec_ssfc_spkr_auto_mode get_cbi_ssfc_spkr_auto_mode(void); - -/** - * Get the eDP PHY alternate tuning from SSFC. - */ -enum ec_ssfc_edp_phy_alt_tuning get_cbi_ssfc_edp_phy_alt_tuning(void); - -/** - * Get the C1 usb mux from SSFC. - */ -enum ec_ssfc_c1_mux get_cbi_ssfc_c1_mux(void); - -#endif /* _ZORK_CBI_SSFC__H_ */ diff --git a/baseboard/zork/usb_pd_policy.c b/baseboard/zork/usb_pd_policy.c deleted file mode 100644 index 8dcdfa7635..0000000000 --- a/baseboard/zork/usb_pd_policy.c +++ /dev/null @@ -1,72 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Shared USB-C policy for Zork boards */ - -#include "charge_manager.h" -#include "chipset.h" -#include "common.h" -#include "compile_time_macros.h" -#include "console.h" -#include "ec_commands.h" -#include "gpio.h" -#include "system.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usbc_ppc.h" -#include "util.h" - -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) - -int pd_check_vconn_swap(int port) -{ - /* in G3, do not allow vconn swap since 5V rail is off */ - return gpio_get_level(GPIO_S5_PGOOD); -} - -void pd_power_supply_reset(int port) -{ - /* Don't need to shutoff VBus if we are not sourcing it */ - if (ppc_is_sourcing_vbus(port)) { - /* Disable VBUS. */ - ppc_vbus_source_enable(port, 0); - - /* Enable discharge if we were previously sourcing 5V */ - if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE)) - pd_set_vbus_discharge(port, 1); - } - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); -} - -int pd_set_power_supply_ready(int port) -{ - int rv; - - /* Disable charging. */ - rv = ppc_vbus_sink_enable(port, 0); - if (rv) - return rv; - - if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE)) - pd_set_vbus_discharge(port, 0); - - /* Provide Vbus. */ - rv = ppc_vbus_source_enable(port, 1); - if (rv) - return rv; - - /* Notify host of power info change. */ - pd_send_host_event(PD_EVENT_POWER_CHANGE); - - return EC_SUCCESS; -} - -int board_vbus_source_enabled(int port) -{ - return ppc_is_sourcing_vbus(port); -} diff --git a/baseboard/zork/variant_dalboz.c b/baseboard/zork/variant_dalboz.c deleted file mode 100644 index 10058bb8bc..0000000000 --- a/baseboard/zork/variant_dalboz.c +++ /dev/null @@ -1,220 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "adc.h" -#include "charger.h" -#include "chipset.h" -#include "common.h" -#include "driver/charger/isl9241.h" -#include "driver/temp_sensor/sb_tsi.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "power.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" - -const struct power_signal_info power_signal_list[] = { - [X86_SLP_S3_N] = { - .gpio = GPIO_PCH_SLP_S3_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S3_DEASSERTED", - }, - [X86_SLP_S5_N] = { - .gpio = GPIO_PCH_SLP_S5_L, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "SLP_S5_DEASSERTED", - }, - [X86_S0_PGOOD] = { - .gpio = GPIO_S0_PGOOD, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "S0_PGOOD", - }, - [X86_S5_PGOOD] = { - .gpio = GPIO_S5_PGOOD, - .flags = POWER_SIGNAL_ACTIVE_HIGH, - .name = "S5_PGOOD", - }, -}; -BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); - -int board_get_temp(int idx, int *temp_k) -{ - int mv; - int temp_c; - enum adc_channel channel; - - /* idx is the sensor index set in board temp_sensors[] */ - switch (idx) { - case TEMP_SENSOR_CHARGER: - channel = ADC_TEMP_SENSOR_CHARGER; - break; - case TEMP_SENSOR_SOC: - /* thermistor is not powered in G3 */ - if (chipset_in_state(CHIPSET_STATE_HARD_OFF)) - return EC_ERROR_NOT_POWERED; - - /* adc power not ready when transition to S5 */ - if (chipset_in_or_transitioning_to_state( - CHIPSET_STATE_SOFT_OFF)) - return EC_ERROR_NOT_POWERED; - - channel = ADC_TEMP_SENSOR_SOC; - break; - default: - return EC_ERROR_INVAL; - } - - mv = adc_read_channel(channel); - if (mv < 0) - return EC_ERROR_INVAL; - - temp_c = thermistor_linear_interpolate(mv, &thermistor_info); - *temp_k = C_TO_K(temp_c); - return EC_SUCCESS; -} - -const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_CHARGER] = { - .name = "CHARGER", - .input_ch = NPCX_ADC_CH2, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, - [ADC_TEMP_SENSOR_SOC] = { - .name = "SOC", - .input_ch = NPCX_ADC_CH3, - .factor_mul = ADC_MAX_VOLT, - .factor_div = ADC_READ_MAX + 1, - .shift = 0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); - -const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_CHARGER] = { - .name = "Charger", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = board_get_temp, - .idx = TEMP_SENSOR_CHARGER, - }, - [TEMP_SENSOR_SOC] = { - .name = "SOC", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = board_get_temp, - .idx = TEMP_SENSOR_SOC, - }, - [TEMP_SENSOR_CPU] = { - .name = "CPU", - .type = TEMP_SENSOR_TYPE_CPU, - .read = sb_tsi_get_val, - .idx = 0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - -__overridable struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = { - [TEMP_SENSOR_CHARGER] = { - .temp_host = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(90), - [EC_TEMP_THRESH_HALT] = C_TO_K(92), - }, - .temp_host_release = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(80), - } - }, - [TEMP_SENSOR_SOC] = { - .temp_host = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(90), - [EC_TEMP_THRESH_HALT] = C_TO_K(92), - }, - .temp_host_release = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(80), - } - }, - [TEMP_SENSOR_CPU] = { - .temp_host = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(90), - [EC_TEMP_THRESH_HALT] = C_TO_K(92), - }, - .temp_host_release = { - [EC_TEMP_THRESH_HIGH] = C_TO_K(80), - } - }, -}; -BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); - -const struct i2c_port_t i2c_ports[] = { - { - .name = "tcpc0", - .port = I2C_PORT_TCPC0, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A0_C0_SCL, - .sda = GPIO_EC_I2C_USB_A0_C0_SDA, - }, - { - .name = "tcpc1", - .port = I2C_PORT_TCPC1, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A1_C1_SCL, - .sda = GPIO_EC_I2C_USB_A1_C1_SDA, - }, - { - .name = "charger", - .port = I2C_PORT_CHARGER, - .kbps = 100, - .scl = GPIO_EC_I2C_POWER_SCL, - .sda = GPIO_EC_I2C_POWER_SDA, - }, - { - .name = "ap_mux", - .port = I2C_PORT_USB_AP_MUX, - .kbps = 400, - .scl = GPIO_EC_I2C_USBC_AP_MUX_SCL, - .sda = GPIO_EC_I2C_USBC_AP_MUX_SDA, - }, - { - .name = "thermal", - .port = I2C_PORT_THERMAL_AP, - .kbps = 400, - .scl = GPIO_FCH_SIC, - .sda = GPIO_FCH_SID, - }, - { - .name = "sensor", - .port = I2C_PORT_SENSOR, - .kbps = 400, - .scl = GPIO_EC_I2C_SENSOR_CBI_SCL, - .sda = GPIO_EC_I2C_SENSOR_CBI_SDA, - }, - { - .name = "ap_audio", - .port = I2C_PORT_AP_AUDIO, - .kbps = 400, - .scl = GPIO_I2C_AUDIO_USB_HUB_SCL, - .sda = GPIO_I2C_AUDIO_USB_HUB_SDA, - }, - { - .name = "battery", - .port = I2C_PORT_BATTERY_V1, - .kbps = 100, - .scl = GPIO_EC_I2C_BATT_SCL, - .sda = GPIO_EC_I2C_BATT_SDA, - }, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/***************************************************************************** - * Charger - */ - -const struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER, - .i2c_addr_flags = ISL9241_ADDR_FLAGS, - .drv = &isl9241_drv, - }, -}; diff --git a/baseboard/zork/variant_trembyle.c b/baseboard/zork/variant_trembyle.c deleted file mode 100644 index b39380db59..0000000000 --- a/baseboard/zork/variant_trembyle.c +++ /dev/null @@ -1,550 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "charger.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/bc12/pi3usb9201.h" -#include "driver/charger/isl9241.h" -#include "driver/ppc/aoz1380.h" -#include "driver/ppc/nx20p348x.h" -#include "driver/retimer/ps8802.h" -#include "driver/retimer/ps8818.h" -#include "driver/retimer/tusb544.h" -#include "driver/tcpm/nct38xx.h" -#include "driver/usb_mux/amd_fp5.h" -#include "fan.h" -#include "fan_chip.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "ioexpander.h" -#include "task.h" -#include "timer.h" -#include "usb_mux.h" -#include "usb_pd_tcpm.h" -#include "usbc_ppc.h" - -#define CPRINTSUSB(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTFUSB(format, args...) cprintf(CC_USBCHARGE, format, ## args) - -const struct i2c_port_t i2c_ports[] = { - { - .name = "tcpc0", - .port = I2C_PORT_TCPC0, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A0_C0_SCL, - .sda = GPIO_EC_I2C_USB_A0_C0_SDA, - }, - { - .name = "tcpc1", - .port = I2C_PORT_TCPC1, - .kbps = 400, - .scl = GPIO_EC_I2C_USB_A1_C1_SCL, - .sda = GPIO_EC_I2C_USB_A1_C1_SDA, - }, - { - .name = "battery", - .port = I2C_PORT_BATTERY, - .kbps = 100, - .scl = GPIO_EC_I2C_BATT_SCL, - .sda = GPIO_EC_I2C_BATT_SDA, - }, - { - .name = "ap_mux", - .port = I2C_PORT_USB_AP_MUX, - .kbps = 400, - .scl = GPIO_EC_I2C_USBC_AP_MUX_SCL, - .sda = GPIO_EC_I2C_USBC_AP_MUX_SDA, - }, - { - .name = "therm_chg", - .port = I2C_PORT_THERMAL_AP, - .kbps = 400, - .scl = GPIO_FCH_SIC_POWER_SCL, - .sda = GPIO_FCH_SID_POWER_SDA, - }, - { - .name = "sensor", - .port = I2C_PORT_SENSOR, - .kbps = 400, - .scl = GPIO_EC_I2C_SENSOR_CBI_SCL, - .sda = GPIO_EC_I2C_SENSOR_CBI_SDA, - }, - { - .name = "ap_audio", - .port = I2C_PORT_AP_AUDIO, - .kbps = 400, - .scl = GPIO_FCH_I2C_AUDIO_SCL, - .sda = GPIO_FCH_I2C_AUDIO_SDA, - }, - { - .name = "ap_hdmi", - .port = I2C_PORT_AP_HDMI, - .kbps = 400, - .scl = GPIO_FCH_I2C_HDMI_HUB_3V3_SCL, - .sda = GPIO_FCH_I2C_HDMI_HUB_3V3_SDA, - }, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/***************************************************************************** - * Charger - */ - -struct charger_config_t chg_chips[] = { - { - .i2c_port = I2C_PORT_CHARGER_V1, - .i2c_addr_flags = ISL9241_ADDR_FLAGS, - .drv = &isl9241_drv, - }, -}; - -/***************************************************************************** - * TCPC - */ - -void baseboard_tcpc_init(void) -{ - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_PPC_FAULT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL); - - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL); - - /* Enable BC 1.2 interrupts */ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL); - - /* Enable SBU fault interrupts */ - ioex_enable_interrupt(IOEX_USB_C0_SBU_FAULT_ODL); - ioex_enable_interrupt(IOEX_USB_C1_SBU_FAULT_DB_ODL); -} -DECLARE_HOOK(HOOK_INIT, baseboard_tcpc_init, HOOK_PRIO_INIT_I2C + 1); - -struct ppc_config_t ppc_chips[] = { - [USBC_PORT_C0] = { - /* Device does not talk I2C */ - .drv = &aoz1380_drv - }, - - [USBC_PORT_C1] = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = NX20P3483_ADDR1_FLAGS, - .drv = &nx20p348x_drv - }, -}; -BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT); -unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips); - -__overridable void ppc_interrupt(enum gpio_signal signal) -{ - switch (signal) { - case GPIO_USB_C0_PPC_FAULT_ODL: - aoz1380_interrupt(USBC_PORT_C0); - break; - - case GPIO_USB_C1_PPC_INT_ODL: - nx20p348x_interrupt(USBC_PORT_C1); - break; - - default: - break; - } -} - -int board_set_active_charge_port(int port) -{ - int is_valid_port = (port >= 0 && - port < CONFIG_USB_PD_PORT_MAX_COUNT); - int i; - - if (port == CHARGE_PORT_NONE) { - CPRINTSUSB("Disabling all charger ports"); - - /* Disable all ports. */ - for (i = 0; i < ppc_cnt; i++) { - /* - * Do not return early if one fails otherwise we can - * get into a boot loop assertion failure. - */ - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("Disabling C%d as sink failed.", i); - } - - return EC_SUCCESS; - } else if (!is_valid_port) { - return EC_ERROR_INVAL; - } - - - /* Check if the port is sourcing VBUS. */ - if (ppc_is_sourcing_vbus(port)) { - CPRINTFUSB("Skip enable C%d", port); - return EC_ERROR_INVAL; - } - - CPRINTSUSB("New charge port: C%d", port); - - /* - * Turn off the other ports' sink path FETs, before enabling the - * requested charge port. - */ - for (i = 0; i < ppc_cnt; i++) { - if (i == port) - continue; - - if (ppc_vbus_sink_enable(i, 0)) - CPRINTSUSB("C%d: sink path disable failed.", i); - } - - /* Enable requested charge port. */ - if (ppc_vbus_sink_enable(port, 1)) { - CPRINTSUSB("C%d: sink path enable failed.", port); - return EC_ERROR_UNKNOWN; - } - - return EC_SUCCESS; -} - -void board_overcurrent_event(int port, int is_overcurrented) -{ - switch (port) { - case USBC_PORT_C0: - ioex_set_level(IOEX_USB_C0_FAULT_ODL, !is_overcurrented); - break; - - case USBC_PORT_C1: - ioex_set_level(IOEX_USB_C1_FAULT_ODL, !is_overcurrented); - break; - - default: - break; - } -} - -const struct tcpc_config_t tcpc_config[] = { - [USBC_PORT_C0] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC0, - .addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - }, - .drv = &nct38xx_tcpm_drv, - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, - [USBC_PORT_C1] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_TCPC1, - .addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - }, - .drv = &nct38xx_tcpm_drv, - .flags = TCPC_FLAGS_TCPCI_REV2_0, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT); -BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT); - -const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = { - [USBC_PORT_C0] = { - .i2c_port = I2C_PORT_TCPC0, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, - - [USBC_PORT_C1] = { - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT); - -static void reset_nct38xx_port(int port) -{ - enum gpio_signal reset_gpio_l; - - if (port == USBC_PORT_C0) - reset_gpio_l = GPIO_USB_C0_TCPC_RST_L; - else if (port == USBC_PORT_C1) - reset_gpio_l = GPIO_USB_C1_TCPC_RST_L; - else - /* Invalid port: do nothing */ - return; - - gpio_set_level(reset_gpio_l, 0); - msleep(NCT38XX_RESET_HOLD_DELAY_MS); - gpio_set_level(reset_gpio_l, 1); - nct38xx_reset_notify(port); - if (NCT3807_RESET_POST_DELAY_MS != 0) - msleep(NCT3807_RESET_POST_DELAY_MS); -} - - -void board_reset_pd_mcu(void) -{ - /* Reset TCPC0 */ - reset_nct38xx_port(USBC_PORT_C0); - - /* Reset TCPC1 */ - reset_nct38xx_port(USBC_PORT_C1); -} - -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - /* - * Check which port has the ALERT line set and ignore if that TCPC has - * its reset line active. - */ - if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C0_TCPC_RST_L) != 0) - status |= PD_STATUS_TCPC_ALERT_0; - } - - if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL)) { - if (gpio_get_level(GPIO_USB_C1_TCPC_RST_L) != 0) - status |= PD_STATUS_TCPC_ALERT_1; - } - - return status; -} - -void tcpc_alert_event(enum gpio_signal signal) -{ - int port = -1; - - switch (signal) { - case GPIO_USB_C0_TCPC_INT_ODL: - port = 0; - break; - case GPIO_USB_C1_TCPC_INT_ODL: - port = 1; - break; - default: - return; - } - - schedule_deferred_pd_interrupt(port); -} - - -int board_pd_set_frs_enable(int port, int enable) -{ - int rv = EC_SUCCESS; - - /* Use the TCPC to enable fast switch when FRS included */ - if (port == USBC_PORT_C0) { - rv = ioex_set_level(IOEX_USB_C0_TCPC_FASTSW_CTL_EN, - !!enable); - } else { - rv = ioex_set_level(IOEX_USB_C1_TCPC_FASTSW_CTL_EN, - !!enable); - } - - return rv; -} - -void bc12_interrupt(enum gpio_signal signal) -{ - switch (signal) { - case GPIO_USB_C0_BC12_INT_ODL: - task_set_event(TASK_ID_USB_CHG_P0, USB_CHG_EVENT_BC12); - break; - - case GPIO_USB_C1_BC12_INT_ODL: - task_set_event(TASK_ID_USB_CHG_P1, USB_CHG_EVENT_BC12); - break; - - default: - break; - } -} - -/***************************************************************************** - * IO expander - */ - -struct ioexpander_config_t ioex_config[] = { - [USBC_PORT_C0] = { - .i2c_host_port = I2C_PORT_TCPC0, - .i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - .drv = &nct38xx_ioexpander_drv, - }, - [USBC_PORT_C1] = { - .i2c_host_port = I2C_PORT_TCPC1, - .i2c_addr_flags = NCT38XX_I2C_ADDR1_1_FLAGS, - .drv = &nct38xx_ioexpander_drv, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(ioex_config) == USBC_PORT_COUNT); -BUILD_ASSERT(CONFIG_IO_EXPANDER_PORT_COUNT == USBC_PORT_COUNT); - -/***************************************************************************** - * Custom Zork USB-C1 Retimer/MUX driver - */ - -/* - * PS8802 set mux board tuning. - * Adds in board specific gain and DP lane count configuration - */ -static int board_ps8802_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - int rv = EC_SUCCESS; - - /* Make sure the PS8802 is awake */ - rv = ps8802_i2c_wake(me); - if (rv) - return rv; - - /* USB specific config */ - if (mux_state & USB_PD_MUX_USB_ENABLED) { - /* Boost the USB gain */ - rv = ps8802_i2c_field_update16(me, - PS8802_REG_PAGE2, - PS8802_REG2_USB_SSEQ_LEVEL, - PS8802_USBEQ_LEVEL_UP_MASK, - PS8802_USBEQ_LEVEL_UP_19DB); - if (rv) - return rv; - } - - /* DP specific config */ - if (mux_state & USB_PD_MUX_DP_ENABLED) { - /* Boost the DP gain */ - rv = ps8802_i2c_field_update8(me, - PS8802_REG_PAGE2, - PS8802_REG2_DPEQ_LEVEL, - PS8802_DPEQ_LEVEL_UP_MASK, - PS8802_DPEQ_LEVEL_UP_19DB); - if (rv) - return rv; - } - - return rv; -} - -/* - * PS8818 set mux board tuning. - * Adds in board specific gain and DP lane count configuration - */ -static int board_ps8818_mux_set(const struct usb_mux *me, - mux_state_t mux_state) -{ - int rv = EC_SUCCESS; - - /* USB specific config */ - if (mux_state & USB_PD_MUX_USB_ENABLED) { - /* Boost the USB gain */ - rv = ps8818_i2c_field_update8(me, - PS8818_REG_PAGE1, - PS8818_REG1_APTX1EQ_10G_LEVEL, - PS8818_EQ_LEVEL_UP_MASK, - PS8818_EQ_LEVEL_UP_19DB); - if (rv) - return rv; - - rv = ps8818_i2c_field_update8(me, - PS8818_REG_PAGE1, - PS8818_REG1_APTX2EQ_10G_LEVEL, - PS8818_EQ_LEVEL_UP_MASK, - PS8818_EQ_LEVEL_UP_19DB); - if (rv) - return rv; - - rv = ps8818_i2c_field_update8(me, - PS8818_REG_PAGE1, - PS8818_REG1_APTX1EQ_5G_LEVEL, - PS8818_EQ_LEVEL_UP_MASK, - PS8818_EQ_LEVEL_UP_19DB); - if (rv) - return rv; - - rv = ps8818_i2c_field_update8(me, - PS8818_REG_PAGE1, - PS8818_REG1_APTX2EQ_5G_LEVEL, - PS8818_EQ_LEVEL_UP_MASK, - PS8818_EQ_LEVEL_UP_19DB); - if (rv) - return rv; - - /* Set the RX input termination */ - rv = ps8818_i2c_field_update8(me, - PS8818_REG_PAGE1, - PS8818_REG1_RX_PHY, - PS8818_RX_INPUT_TERM_MASK, - ZORK_PS8818_RX_INPUT_TERM); - if (rv) - return rv; - } - - /* DP specific config */ - if (mux_state & USB_PD_MUX_DP_ENABLED) { - /* Boost the DP gain */ - rv = ps8818_i2c_field_update8(me, - PS8818_REG_PAGE1, - PS8818_REG1_DPEQ_LEVEL, - PS8818_DPEQ_LEVEL_UP_MASK, - PS8818_DPEQ_LEVEL_UP_19DB); - if (rv) - return rv; - - /* Enable IN_HPD on the DB */ - gpio_or_ioex_set_level(board_usbc1_retimer_inhpd, 1); - } else { - /* Disable IN_HPD on the DB */ - gpio_or_ioex_set_level(board_usbc1_retimer_inhpd, 0); - } - - return rv; -} - -const struct usb_mux usbc1_ps8802 = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = PS8802_I2C_ADDR_FLAGS, - .driver = &ps8802_usb_mux_driver, - .board_set = &board_ps8802_mux_set, -}; -const struct usb_mux usbc1_ps8818 = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_TCPC1, - .i2c_addr_flags = PS8818_I2C_ADDR_FLAGS, - .driver = &ps8818_usb_retimer_driver, - .board_set = &board_ps8818_mux_set, -}; -struct usb_mux usbc1_amd_fp5_usb_mux = { - .usb_port = USBC_PORT_C1, - .i2c_port = I2C_PORT_USB_AP_MUX, - .i2c_addr_flags = AMD_FP5_MUX_I2C_ADDR_FLAGS, - .driver = &amd_fp5_usb_mux_driver, -}; - -/* - * USB-C1 HPD may go through an IO expander, so we must use a custom HPD GPIO - * control function with CONFIG_USB_PD_DP_HPD_GPIO_CUSTOM. - * - * TODO(b/165622386) revert to non-custom GPIO control when HPD is no longer on - * the IO expander in any variants. - */ -void svdm_set_hpd_gpio(int port, int en) -{ - gpio_or_ioex_set_level(PORT_TO_HPD(port), en); -} - -int svdm_get_hpd_gpio(int port) -{ - int out; - - if (gpio_or_ioex_get_level(PORT_TO_HPD(port), &out) != EC_SUCCESS) { - ccprints("Failed to read current HPD for port C%d", port); - return 0; - } - return out; -} |