diff options
Diffstat (limited to 'install-files/swift')
12 files changed, 0 insertions, 1001 deletions
diff --git a/install-files/swift/etc/ntp.conf b/install-files/swift/etc/ntp.conf deleted file mode 100644 index 54522871..00000000 --- a/install-files/swift/etc/ntp.conf +++ /dev/null @@ -1,25 +0,0 @@ -{% if SWIFT_CONTROLLER is undefined or SWIFT_CONTROLLER == "False" %} -server {{ CONTROLLER_HOST_ADDRESS }} iburst -{% else %} -# We use iburst here to reduce the potential initial delay to set the clock -server 0.pool.ntp.org iburst -server 1.pool.ntp.org iburst -server 2.pool.ntp.org iburst -server 3.pool.ntp.org iburst - -# kod - notify client when packets are denied service, -# rather than just dropping the packets -# -# nomodify - deny queries which attempt to modify the state of the server -# -# notrap - decline to provide mode 6 control message trap service to -# matching hosts -# -# see ntp.conf(5) for more details -restrict -4 default kod notrap nomodify -restrict -6 default kod notrap nomodify -{% endif %} - -# The default rlimit isn't enough in some cases -# so we set a higher limit here -rlimit memlock 256 diff --git a/install-files/swift/manifest b/install-files/swift/manifest deleted file mode 100644 index 7fd76206..00000000 --- a/install-files/swift/manifest +++ /dev/null @@ -1,15 +0,0 @@ -0040755 0 0 /usr/share -0040755 0 0 /usr/share/swift -0100644 0 0 /usr/share/swift/hosts -0100644 0 0 /usr/share/swift/swift-storage.yml -0040755 0 0 /usr/share/swift/etc -0040755 0 0 /usr/share/swift/etc/swift -0100644 0 0 /usr/share/swift/etc/swift/account-server.j2 -0100644 0 0 /usr/share/swift/etc/swift/swift.j2 -0100644 0 0 /usr/share/swift/etc/swift/object-server.j2 -0100644 0 0 /usr/share/swift/etc/swift/container-server.j2 -0100644 0 0 /usr/share/swift/etc/rsyncd.j2 -0100644 0 0 /usr/lib/systemd/system/swift-storage-setup.service -0100644 0 0 /usr/lib/systemd/system/swift-storage.service -template overwrite 0100644 0 0 /etc/ntp.conf -overwrite 0100644 0 0 /usr/lib/systemd/system/rsync.service diff --git a/install-files/swift/usr/lib/systemd/system/rsync.service b/install-files/swift/usr/lib/systemd/system/rsync.service deleted file mode 100644 index babcfb46..00000000 --- a/install-files/swift/usr/lib/systemd/system/rsync.service +++ /dev/null @@ -1,11 +0,0 @@ -[Unit] -Description=fast remote file copy program daemon -After=swift-storage-setup.service -ConditionPathExists=/etc/rsyncd.conf - -[Service] -ExecStart=/usr/bin/rsync --daemon --no-detach -Restart=on-failure - -[Install] -WantedBy=multi-user.target diff --git a/install-files/swift/usr/lib/systemd/system/swift-storage-setup.service b/install-files/swift/usr/lib/systemd/system/swift-storage-setup.service deleted file mode 100644 index 3df31163..00000000 --- a/install-files/swift/usr/lib/systemd/system/swift-storage-setup.service +++ /dev/null @@ -1,12 +0,0 @@ -[Unit] -Description=Run openstack-swift-storage-setup (once) -After=local-fs.target postgres-server-setup.service - -[Service] -Type=oneshot -RemainAfterExit=yes -ExecStart=/usr/bin/ansible-playbook -v -i /usr/share/swift/hosts /usr/share/swift/swift-storage.yml -Restart=no - -[Install] -WantedBy=multi-user.target diff --git a/install-files/swift/usr/lib/systemd/system/swift-storage.service b/install-files/swift/usr/lib/systemd/system/swift-storage.service deleted file mode 100644 index dc41d3bc..00000000 --- a/install-files/swift/usr/lib/systemd/system/swift-storage.service +++ /dev/null @@ -1,12 +0,0 @@ -[Unit] -Description=OpenStack Swift Storage -After=syslog.target network.target swift-storage-setup.service - -[Service] -Type=forking -Restart=on-failure -ExecStart=/usr/bin/swift-init all start -ExecStop=/usr/bin/swift-init all stop - -[Install] -WantedBy=multi-user.target diff --git a/install-files/swift/usr/share/swift/etc/rsyncd.j2 b/install-files/swift/usr/share/swift/etc/rsyncd.j2 deleted file mode 100644 index c0657665..00000000 --- a/install-files/swift/usr/share/swift/etc/rsyncd.j2 +++ /dev/null @@ -1,23 +0,0 @@ -uid = swift -gid = swift -log file = /var/log/rsyncd.log -pid file = /var/run/rsyncd.pid -address = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} - -[account] -max connections = 2 -path = /srv/node/ -read only = false -lock file = /var/lock/account.lock - -[container] -max connections = 2 -path = /srv/node/ -read only = false -lock file = /var/lock/container.lock - -[object] -max connections = 2 -path = /srv/node/ -read only = false -lock file = /var/lock/object.lock diff --git a/install-files/swift/usr/share/swift/etc/swift/account-server.j2 b/install-files/swift/usr/share/swift/etc/swift/account-server.j2 deleted file mode 100644 index d977e295..00000000 --- a/install-files/swift/usr/share/swift/etc/swift/account-server.j2 +++ /dev/null @@ -1,192 +0,0 @@ -[DEFAULT] -# bind_ip = 0.0.0.0 -bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} -bind_port = 6002 -# bind_timeout = 30 -# backlog = 4096 -user = swift -swift_dir = /etc/swift -devices = /srv/node -# mount_check = true -# disable_fallocate = false -# -# Use an integer to override the number of pre-forked processes that will -# accept connections. -# workers = auto -# -# Maximum concurrent requests per worker -# max_clients = 1024 -# -# You can specify default log routing here if you want: -# log_name = swift -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# The following caps the length of log lines to the value given; no limit if -# set to 0, the default. -# log_max_line_length = 0 -# -# comma separated list of functions to call to setup custom log handlers. -# functions get passed: conf, name, log_to_console, log_route, fmt, logger, -# adapted_logger -# log_custom_handlers = -# -# If set, log_udp_host will override log_address -# log_udp_host = -# log_udp_port = 514 -# -# You can enable StatsD logging here: -# log_statsd_host = localhost -# log_statsd_port = 8125 -# log_statsd_default_sample_rate = 1.0 -# log_statsd_sample_rate_factor = 1.0 -# log_statsd_metric_prefix = -# -# If you don't mind the extra disk space usage in overhead, you can turn this -# on to preallocate disk space with SQLite databases to decrease fragmentation. -# db_preallocation = off -# -# eventlet_debug = false -# -# You can set fallocate_reserve to the number of bytes you'd like fallocate to -# reserve, whether there is space for the given file size or not. -# fallocate_reserve = 0 - -[pipeline:main] -pipeline = healthcheck recon account-server - -[app:account-server] -use = egg:swift#account -# You can override the default log routing for this app here: -# set log_name = account-server -# set log_facility = LOG_LOCAL0 -# set log_level = INFO -# set log_requests = true -# set log_address = /dev/log -# -# auto_create_account_prefix = . -# -# Configure parameter for creating specific server -# To handle all verbs, including replication verbs, do not specify -# "replication_server" (this is the default). To only handle replication, -# set to a True value (e.g. "True" or "1"). To handle only non-replication -# verbs, set to "False". Unless you have a separate replication network, you -# should not specify any value for "replication_server". -# replication_server = false - -[filter:healthcheck] -use = egg:swift#healthcheck -# An optional filesystem path, which if present, will cause the healthcheck -# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" -# disable_path = - -[filter:recon] -use = egg:swift#recon -recon_cache_path = /var/cache/swift - -[account-replicator] -# You can override the default log routing for this app here (don't use set!): -# log_name = account-replicator -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# vm_test_mode = no -# per_diff = 1000 -# max_diffs = 100 -# concurrency = 8 -# interval = 30 -# -# How long without an error before a node's error count is reset. This will -# also be how long before a node is reenabled after suppression is triggered. -# error_suppression_interval = 60 -# -# How many errors can accumulate before a node is temporarily ignored. -# error_suppression_limit = 10 -# -# node_timeout = 10 -# conn_timeout = 0.5 -# -# The replicator also performs reclamation -# reclaim_age = 604800 -# -# Time in seconds to wait between replication passes -# Note: if the parameter 'interval' is defined then it will be used in place -# of run_pause. -# run_pause = 30 -# -# recon_cache_path = /var/cache/swift - -[account-auditor] -# You can override the default log routing for this app here (don't use set!): -# log_name = account-auditor -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# Will audit each account at most once per interval -# interval = 1800 -# -# log_facility = LOG_LOCAL0 -# log_level = INFO -# accounts_per_second = 200 -# recon_cache_path = /var/cache/swift - -[account-reaper] -# You can override the default log routing for this app here (don't use set!): -# log_name = account-reaper -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# concurrency = 25 -# interval = 3600 -# node_timeout = 10 -# conn_timeout = 0.5 -# -# Normally, the reaper begins deleting account information for deleted accounts -# immediately; you can set this to delay its work however. The value is in -# seconds; 2592000 = 30 days for example. -# delay_reaping = 0 -# -# If the account fails to be be reaped due to a persistent error, the -# account reaper will log a message such as: -# Account <name> has not been reaped since <date> -# You can search logs for this message if space is not being reclaimed -# after you delete account(s). -# Default is 2592000 seconds (30 days). This is in addition to any time -# requested by delay_reaping. -# reap_warn_after = 2592000 - -# Note: Put it at the beginning of the pipeline to profile all middleware. But -# it is safer to put this after healthcheck. -[filter:xprofile] -use = egg:swift#xprofile -# This option enable you to switch profilers which should inherit from python -# standard profiler. Currently the supported value can be 'cProfile', -# 'eventlet.green.profile' etc. -# profile_module = eventlet.green.profile -# -# This prefix will be used to combine process ID and timestamp to name the -# profile data file. Make sure the executing user has permission to write -# into this path (missing path segments will be created, if necessary). -# If you enable profiling in more than one type of daemon, you must override -# it with an unique value like: /var/log/swift/profile/account.profile -# log_filename_prefix = /tmp/log/swift/profile/default.profile -# -# the profile data will be dumped to local disk based on above naming rule -# in this interval. -# dump_interval = 5.0 -# -# Be careful, this option will enable profiler to dump data into the file with -# time stamp which means there will be lots of files piled up in the directory. -# dump_timestamp = false -# -# This is the path of the URL to access the mini web UI. -# path = /__profile__ -# -# Clear the data when the wsgi server shutdown. -# flush_at_shutdown = false -# -# unwind the iterator of applications -# unwind = false diff --git a/install-files/swift/usr/share/swift/etc/swift/container-server.j2 b/install-files/swift/usr/share/swift/etc/swift/container-server.j2 deleted file mode 100644 index 3c63b7d0..00000000 --- a/install-files/swift/usr/share/swift/etc/swift/container-server.j2 +++ /dev/null @@ -1,211 +0,0 @@ -[DEFAULT] -# bind_ip = 0.0.0.0 -bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} -bind_port = 6001 -# bind_timeout = 30 -# backlog = 4096 -user = swift -swift_dir = /etc/swift -devices = /srv/node -# mount_check = true -# disable_fallocate = false -# -# Use an integer to override the number of pre-forked processes that will -# accept connections. -# workers = auto -# -# Maximum concurrent requests per worker -# max_clients = 1024 -# -# This is a comma separated list of hosts allowed in the X-Container-Sync-To -# field for containers. This is the old-style of using container sync. It is -# strongly recommended to use the new style of a separate -# container-sync-realms.conf -- see container-sync-realms.conf-sample -# allowed_sync_hosts = 127.0.0.1 -# -# You can specify default log routing here if you want: -# log_name = swift -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# The following caps the length of log lines to the value given; no limit if -# set to 0, the default. -# log_max_line_length = 0 -# -# comma separated list of functions to call to setup custom log handlers. -# functions get passed: conf, name, log_to_console, log_route, fmt, logger, -# adapted_logger -# log_custom_handlers = -# -# If set, log_udp_host will override log_address -# log_udp_host = -# log_udp_port = 514 -# -# You can enable StatsD logging here: -# log_statsd_host = localhost -# log_statsd_port = 8125 -# log_statsd_default_sample_rate = 1.0 -# log_statsd_sample_rate_factor = 1.0 -# log_statsd_metric_prefix = -# -# If you don't mind the extra disk space usage in overhead, you can turn this -# on to preallocate disk space with SQLite databases to decrease fragmentation. -# db_preallocation = off -# -# eventlet_debug = false -# -# You can set fallocate_reserve to the number of bytes you'd like fallocate to -# reserve, whether there is space for the given file size or not. -# fallocate_reserve = 0 - -[pipeline:main] -pipeline = healthcheck recon container-server - -[app:container-server] -use = egg:swift#container -# You can override the default log routing for this app here: -# set log_name = container-server -# set log_facility = LOG_LOCAL0 -# set log_level = INFO -# set log_requests = true -# set log_address = /dev/log -# -# node_timeout = 3 -# conn_timeout = 0.5 -# allow_versions = false -# auto_create_account_prefix = . -# -# Configure parameter for creating specific server -# To handle all verbs, including replication verbs, do not specify -# "replication_server" (this is the default). To only handle replication, -# set to a True value (e.g. "True" or "1"). To handle only non-replication -# verbs, set to "False". Unless you have a separate replication network, you -# should not specify any value for "replication_server". -# replication_server = false - -[filter:healthcheck] -use = egg:swift#healthcheck -# An optional filesystem path, which if present, will cause the healthcheck -# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" -# disable_path = - -[filter:recon] -use = egg:swift#recon -recon_cache_path = /var/cache/swift - -[container-replicator] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-replicator -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# vm_test_mode = no -# per_diff = 1000 -# max_diffs = 100 -# concurrency = 8 -# interval = 30 -# node_timeout = 10 -# conn_timeout = 0.5 -# -# The replicator also performs reclamation -# reclaim_age = 604800 -# -# Time in seconds to wait between replication passes -# Note: if the parameter 'interval' is defined then it will be used in place -# of run_pause. -# run_pause = 30 -# -# recon_cache_path = /var/cache/swift - -[container-updater] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-updater -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# interval = 300 -# concurrency = 4 -# node_timeout = 3 -# conn_timeout = 0.5 -# -# slowdown will sleep that amount between containers -# slowdown = 0.01 -# -# Seconds to suppress updating an account that has generated an error -# account_suppression_time = 60 -# -# recon_cache_path = /var/cache/swift - -[container-auditor] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-auditor -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# Will audit each container at most once per interval -# interval = 1800 -# -# containers_per_second = 200 -# recon_cache_path = /var/cache/swift - -[container-sync] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-sync -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# If you need to use an HTTP Proxy, set it here; defaults to no proxy. -# You can also set this to a comma separated list of HTTP Proxies and they will -# be randomly used (simple load balancing). -# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888 -# -# Will sync each container at most once per interval -# interval = 300 -# -# Maximum amount of time to spend syncing each container per pass -# container_time = 60 -# -# Maximum amount of time in seconds for the connection attempt -# conn_timeout = 5 -# Server errors from requests will be retried by default -# request_tries = 3 -# -# Internal client config file path -# internal_client_conf_path = /etc/swift/internal-client.conf - -# Note: Put it at the beginning of the pipeline to profile all middleware. But -# it is safer to put this after healthcheck. -[filter:xprofile] -use = egg:swift#xprofile -# This option enable you to switch profilers which should inherit from python -# standard profiler. Currently the supported value can be 'cProfile', -# 'eventlet.green.profile' etc. -# profile_module = eventlet.green.profile -# -# This prefix will be used to combine process ID and timestamp to name the -# profile data file. Make sure the executing user has permission to write -# into this path (missing path segments will be created, if necessary). -# If you enable profiling in more than one type of daemon, you must override -# it with an unique value like: /var/log/swift/profile/container.profile -# log_filename_prefix = /tmp/log/swift/profile/default.profile -# -# the profile data will be dumped to local disk based on above naming rule -# in this interval. -# dump_interval = 5.0 -# -# Be careful, this option will enable profiler to dump data into the file with -# time stamp which means there will be lots of files piled up in the directory. -# dump_timestamp = false -# -# This is the path of the URL to access the mini web UI. -# path = /__profile__ -# -# Clear the data when the wsgi server shutdown. -# flush_at_shutdown = false -# -# unwind the iterator of applications -# unwind = false diff --git a/install-files/swift/usr/share/swift/etc/swift/object-server.j2 b/install-files/swift/usr/share/swift/etc/swift/object-server.j2 deleted file mode 100644 index 19d72f6c..00000000 --- a/install-files/swift/usr/share/swift/etc/swift/object-server.j2 +++ /dev/null @@ -1,306 +0,0 @@ -[DEFAULT] -# bind_ip = 0.0.0.0 -bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} -bind_port = 6000 -# bind_timeout = 30 -# backlog = 4096 -user = swift -swift_dir = /etc/swift -devices = /srv/node -# mount_check = true -# disable_fallocate = false -# expiring_objects_container_divisor = 86400 -# expiring_objects_account_name = expiring_objects -# -# Use an integer to override the number of pre-forked processes that will -# accept connections. -# workers = auto -# -# Maximum concurrent requests per worker -# max_clients = 1024 -# -# You can specify default log routing here if you want: -# log_name = swift -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# The following caps the length of log lines to the value given; no limit if -# set to 0, the default. -# log_max_line_length = 0 -# -# comma separated list of functions to call to setup custom log handlers. -# functions get passed: conf, name, log_to_console, log_route, fmt, logger, -# adapted_logger -# log_custom_handlers = -# -# If set, log_udp_host will override log_address -# log_udp_host = -# log_udp_port = 514 -# -# You can enable StatsD logging here: -# log_statsd_host = localhost -# log_statsd_port = 8125 -# log_statsd_default_sample_rate = 1.0 -# log_statsd_sample_rate_factor = 1.0 -# log_statsd_metric_prefix = -# -# eventlet_debug = false -# -# You can set fallocate_reserve to the number of bytes you'd like fallocate to -# reserve, whether there is space for the given file size or not. -# fallocate_reserve = 0 -# -# Time to wait while attempting to connect to another backend node. -# conn_timeout = 0.5 -# Time to wait while sending each chunk of data to another backend node. -# node_timeout = 3 -# Time to wait while receiving each chunk of data from a client or another -# backend node. -# client_timeout = 60 -# -# network_chunk_size = 65536 -# disk_chunk_size = 65536 - -[pipeline:main] -pipeline = healthcheck recon object-server - -[app:object-server] -use = egg:swift#object -# You can override the default log routing for this app here: -# set log_name = object-server -# set log_facility = LOG_LOCAL0 -# set log_level = INFO -# set log_requests = true -# set log_address = /dev/log -# -# max_upload_time = 86400 -# slow = 0 -# -# Objects smaller than this are not evicted from the buffercache once read -# keep_cache_size = 5242880 -# -# If true, objects for authenticated GET requests may be kept in buffer cache -# if small enough -# keep_cache_private = false -# -# on PUTs, sync data every n MB -# mb_per_sync = 512 -# -# Comma separated list of headers that can be set in metadata on an object. -# This list is in addition to X-Object-Meta-* headers and cannot include -# Content-Type, etag, Content-Length, or deleted -# allowed_headers = Content-Disposition, Content-Encoding, X-Delete-At, X-Object-Manifest, X-Static-Large-Object -# -# auto_create_account_prefix = . -# -# A value of 0 means "don't use thread pools". A reasonable starting point is -# 4. -# threads_per_disk = 0 -# -# Configure parameter for creating specific server -# To handle all verbs, including replication verbs, do not specify -# "replication_server" (this is the default). To only handle replication, -# set to a True value (e.g. "True" or "1"). To handle only non-replication -# verbs, set to "False". Unless you have a separate replication network, you -# should not specify any value for "replication_server". -# replication_server = false -# -# Set to restrict the number of concurrent incoming REPLICATION requests -# Set to 0 for unlimited -# Note that REPLICATION is currently an ssync only item -# replication_concurrency = 4 -# -# Restricts incoming REPLICATION requests to one per device, -# replication_currency above allowing. This can help control I/O to each -# device, but you may wish to set this to False to allow multiple REPLICATION -# requests (up to the above replication_concurrency setting) per device. -# replication_one_per_device = True -# -# Number of seconds to wait for an existing replication device lock before -# giving up. -# replication_lock_timeout = 15 -# -# These next two settings control when the REPLICATION subrequest handler will -# abort an incoming REPLICATION attempt. An abort will occur if there are at -# least threshold number of failures and the value of failures / successes -# exceeds the ratio. The defaults of 100 and 1.0 means that at least 100 -# failures have to occur and there have to be more failures than successes for -# an abort to occur. -# replication_failure_threshold = 100 -# replication_failure_ratio = 1.0 -# -# Use splice() for zero-copy object GETs. This requires Linux kernel -# version 3.0 or greater. If you set "splice = yes" but the kernel -# does not support it, error messages will appear in the object server -# logs at startup, but your object servers should continue to function. -# -# splice = no - -[filter:healthcheck] -use = egg:swift#healthcheck -# An optional filesystem path, which if present, will cause the healthcheck -# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" -# disable_path = - -[filter:recon] -use = egg:swift#recon -recon_cache_path = /var/cache/swift -#recon_lock_path = /var/lock - -[object-replicator] -# You can override the default log routing for this app here (don't use set!): -# log_name = object-replicator -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# vm_test_mode = no -# daemonize = on -# run_pause = 30 -# concurrency = 1 -# stats_interval = 300 -# -# The sync method to use; default is rsync but you can use ssync to try the -# EXPERIMENTAL all-swift-code-no-rsync-callouts method. Once ssync is verified -# as having performance comparable to, or better than, rsync, we plan to -# deprecate rsync so we can move on with more features for replication. -# sync_method = rsync -# -# max duration of a partition rsync -# rsync_timeout = 900 -# -# bandwidth limit for rsync in kB/s. 0 means unlimited -# rsync_bwlimit = 0 -# -# passed to rsync for io op timeout -# rsync_io_timeout = 30 -# -# node_timeout = <whatever's in the DEFAULT section or 10> -# max duration of an http request; this is for REPLICATE finalization calls and -# so should be longer than node_timeout -# http_timeout = 60 -# -# attempts to kill all workers if nothing replicates for lockup_timeout seconds -# lockup_timeout = 1800 -# -# The replicator also performs reclamation -# reclaim_age = 604800 -# -# ring_check_interval = 15 -# recon_cache_path = /var/cache/swift -# -# limits how long rsync error log lines are -# 0 means to log the entire line -# rsync_error_log_line_length = 0 -# -# handoffs_first and handoff_delete are options for a special case -# such as disk full in the cluster. These two options SHOULD NOT BE -# CHANGED, except for such an extreme situations. (e.g. disks filled up -# or are about to fill up. Anyway, DO NOT let your drives fill up) -# handoffs_first is the flag to replicate handoffs prior to canonical -# partitions. It allows to force syncing and deleting handoffs quickly. -# If set to a True value(e.g. "True" or "1"), partitions -# that are not supposed to be on the node will be replicated first. -# handoffs_first = False -# -# handoff_delete is the number of replicas which are ensured in swift. -# If the number less than the number of replicas is set, object-replicator -# could delete local handoffs even if all replicas are not ensured in the -# cluster. Object-replicator would remove local handoff partition directories -# after syncing partition when the number of successful responses is greater -# than or equal to this number. By default(auto), handoff partitions will be -# removed when it has successfully replicated to all the canonical nodes. -# handoff_delete = auto - -[object-reconstructor] -# You can override the default log routing for this app here (don't use set!): -# Unless otherwise noted, each setting below has the same meaning as described -# in the [object-replicator] section, however these settings apply to the EC -# reconstructor -# -# log_name = object-reconstructor -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# daemonize = on -# run_pause = 30 -# concurrency = 1 -# stats_interval = 300 -# node_timeout = 10 -# http_timeout = 60 -# lockup_timeout = 1800 -# reclaim_age = 604800 -# ring_check_interval = 15 -# recon_cache_path = /var/cache/swift -# handoffs_first = False - -[object-updater] -# You can override the default log routing for this app here (don't use set!): -# log_name = object-updater -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# interval = 300 -# concurrency = 1 -# node_timeout = <whatever's in the DEFAULT section or 10> -# slowdown will sleep that amount between objects -# slowdown = 0.01 -# -# recon_cache_path = /var/cache/swift - -[object-auditor] -# You can override the default log routing for this app here (don't use set!): -# log_name = object-auditor -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# You can set the disk chunk size that the auditor uses making it larger if -# you like for more efficient local auditing of larger objects -# disk_chunk_size = 65536 -# files_per_second = 20 -# concurrency = 1 -# bytes_per_second = 10000000 -# log_time = 3600 -# zero_byte_files_per_second = 50 -# recon_cache_path = /var/cache/swift - -# Takes a comma separated list of ints. If set, the object auditor will -# increment a counter for every object whose size is <= to the given break -# points and report the result after a full scan. -# object_size_stats = - -# Note: Put it at the beginning of the pipleline to profile all middleware. But -# it is safer to put this after healthcheck. -[filter:xprofile] -use = egg:swift#xprofile -# This option enable you to switch profilers which should inherit from python -# standard profiler. Currently the supported value can be 'cProfile', -# 'eventlet.green.profile' etc. -# profile_module = eventlet.green.profile -# -# This prefix will be used to combine process ID and timestamp to name the -# profile data file. Make sure the executing user has permission to write -# into this path (missing path segments will be created, if necessary). -# If you enable profiling in more than one type of daemon, you must override -# it with an unique value like: /var/log/swift/profile/object.profile -# log_filename_prefix = /tmp/log/swift/profile/default.profile -# -# the profile data will be dumped to local disk based on above naming rule -# in this interval. -# dump_interval = 5.0 -# -# Be careful, this option will enable profiler to dump data into the file with -# time stamp which means there will be lots of files piled up in the directory. -# dump_timestamp = false -# -# This is the path of the URL to access the mini web UI. -# path = /__profile__ -# -# Clear the data when the wsgi server shutdown. -# flush_at_shutdown = false -# -# unwind the iterator of applications -# unwind = false diff --git a/install-files/swift/usr/share/swift/etc/swift/swift.j2 b/install-files/swift/usr/share/swift/etc/swift/swift.j2 deleted file mode 100644 index 933e207e..00000000 --- a/install-files/swift/usr/share/swift/etc/swift/swift.j2 +++ /dev/null @@ -1,169 +0,0 @@ -[swift-hash] - -# swift_hash_path_suffix and swift_hash_path_prefix are used as part of the -# the hashing algorithm when determining data placement in the cluster. -# These values should remain secret and MUST NOT change -# once a cluster has been deployed. - -swift_hash_path_suffix = {{ SWIFT_HASH_PATH_SUFFIX }} -swift_hash_path_prefix = {{ SWIFT_HASH_PATH_PREFIX }} - -# storage policies are defined here and determine various characteristics -# about how objects are stored and treated. Policies are specified by name on -# a per container basis. Names are case-insensitive. The policy index is -# specified in the section header and is used internally. The policy with -# index 0 is always used for legacy containers and can be given a name for use -# in metadata however the ring file name will always be 'object.ring.gz' for -# backwards compatibility. If no policies are defined a policy with index 0 -# will be automatically created for backwards compatibility and given the name -# Policy-0. A default policy is used when creating new containers when no -# policy is specified in the request. If no other policies are defined the -# policy with index 0 will be declared the default. If multiple policies are -# defined you must define a policy with index 0 and you must specify a -# default. It is recommended you always define a section for -# storage-policy:0. -# -# A 'policy_type' argument is also supported but is not mandatory. Default -# policy type 'replication' is used when 'policy_type' is unspecified. -[storage-policy:0] -name = Policy-0 -default = yes -#policy_type = replication - -# the following section would declare a policy called 'silver', the number of -# replicas will be determined by how the ring is built. In this example the -# 'silver' policy could have a lower or higher # of replicas than the -# 'Policy-0' policy above. The ring filename will be 'object-1.ring.gz'. You -# may only specify one storage policy section as the default. If you changed -# this section to specify 'silver' as the default, when a client created a new -# container w/o a policy specified, it will get the 'silver' policy because -# this config has specified it as the default. However if a legacy container -# (one created with a pre-policy version of swift) is accessed, it is known -# implicitly to be assigned to the policy with index 0 as opposed to the -# current default. -#[storage-policy:1] -#name = silver -#policy_type = replication - -# The following declares a storage policy of type 'erasure_coding' which uses -# Erasure Coding for data reliability. The 'erasure_coding' storage policy in -# Swift is available as a "beta". Please refer to Swift documentation for -# details on how the 'erasure_coding' storage policy is implemented. -# -# Swift uses PyECLib, a Python Erasure coding API library, for encode/decode -# operations. Please refer to Swift documentation for details on how to -# install PyECLib. -# -# When defining an EC policy, 'policy_type' needs to be 'erasure_coding' and -# EC configuration parameters 'ec_type', 'ec_num_data_fragments' and -# 'ec_num_parity_fragments' must be specified. 'ec_type' is chosen from the -# list of EC backends supported by PyECLib. The ring configured for the -# storage policy must have it's "replica" count configured to -# 'ec_num_data_fragments' + 'ec_num_parity_fragments' - this requirement is -# validated when services start. 'ec_object_segment_size' is the amount of -# data that will be buffered up before feeding a segment into the -# encoder/decoder. More information about these configuration options and -# supported `ec_type` schemes is available in the Swift documentation. Please -# refer to Swift documentation for details on how to configure EC policies. -# -# The example 'deepfreeze10-4' policy defined below is a _sample_ -# configuration with 10 'data' and 4 'parity' fragments. 'ec_type' -# defines the Erasure Coding scheme. 'jerasure_rs_vand' (Reed-Solomon -# Vandermonde) is used as an example below. -# -#[storage-policy:2] -#name = deepfreeze10-4 -#policy_type = erasure_coding -#ec_type = jerasure_rs_vand -#ec_num_data_fragments = 10 -#ec_num_parity_fragments = 4 -#ec_object_segment_size = 1048576 - - -# The swift-constraints section sets the basic constraints on data -# saved in the swift cluster. These constraints are automatically -# published by the proxy server in responses to /info requests. - -[swift-constraints] - -# max_file_size is the largest "normal" object that can be saved in -# the cluster. This is also the limit on the size of each segment of -# a "large" object when using the large object manifest support. -# This value is set in bytes. Setting it to lower than 1MiB will cause -# some tests to fail. It is STRONGLY recommended to leave this value at -# the default (5 * 2**30 + 2). - -#max_file_size = 5368709122 - - -# max_meta_name_length is the max number of bytes in the utf8 encoding -# of the name portion of a metadata header. - -#max_meta_name_length = 128 - - -# max_meta_value_length is the max number of bytes in the utf8 encoding -# of a metadata value - -#max_meta_value_length = 256 - - -# max_meta_count is the max number of metadata keys that can be stored -# on a single account, container, or object - -#max_meta_count = 90 - - -# max_meta_overall_size is the max number of bytes in the utf8 encoding -# of the metadata (keys + values) - -#max_meta_overall_size = 4096 - -# max_header_size is the max number of bytes in the utf8 encoding of each -# header. Using 8192 as default because eventlet use 8192 as max size of -# header line. This value may need to be increased when using identity -# v3 API tokens including more than 7 catalog entries. -# See also include_service_catalog in proxy-server.conf-sample -# (documented in overview_auth.rst) - -#max_header_size = 8192 - - -# max_object_name_length is the max number of bytes in the utf8 encoding -# of an object name - -#max_object_name_length = 1024 - - -# container_listing_limit is the default (and max) number of items -# returned for a container listing request - -#container_listing_limit = 10000 - - -# account_listing_limit is the default (and max) number of items returned -# for an account listing request -#account_listing_limit = 10000 - - -# max_account_name_length is the max number of bytes in the utf8 encoding -# of an account name - -#max_account_name_length = 256 - - -# max_container_name_length is the max number of bytes in the utf8 encoding -# of a container name - -#max_container_name_length = 256 - - -# By default all REST API calls should use "v1" or "v1.0" as the version string, -# for example "/v1/account". This can be manually overridden to make this -# backward-compatible, in case a different version string has been used before. -# Use a comma-separated list in case of multiple allowed versions, for example -# valid_api_versions = v0,v1,v2 -# This is only enforced for account, container and object requests. The allowed -# api versions are by default excluded from /info. - -# valid_api_versions = v1,v1.0 diff --git a/install-files/swift/usr/share/swift/hosts b/install-files/swift/usr/share/swift/hosts deleted file mode 100644 index 5b97818d..00000000 --- a/install-files/swift/usr/share/swift/hosts +++ /dev/null @@ -1 +0,0 @@ -localhost ansible_connection=local diff --git a/install-files/swift/usr/share/swift/swift-storage.yml b/install-files/swift/usr/share/swift/swift-storage.yml deleted file mode 100644 index 62a335ed..00000000 --- a/install-files/swift/usr/share/swift/swift-storage.yml +++ /dev/null @@ -1,24 +0,0 @@ ---- -- hosts: localhost - vars_files: - - swift-storage-vars.yml - vars: - remote_user: root - tasks: - - user: name=swift comment="Swift user" - - file: path=/etc/swift owner=swift group=swift state=directory recurse=yes - - - template: src=/usr/share/swift/etc/rsyncd.j2 dest=/etc/rsyncd.conf - mode=0644 owner=swift group=swift - - - template: src=/usr/share/swift/etc/swift/{{ item }}.j2 - dest=/etc/swift/{{ item }}.conf mode=0644 owner=swift group=swift - with_items: - - account-server - - container-server - - object-server - - swift - - - file: path=/srv/node owner=swift group=swift state=directory recurse=yes - - file: path=/var/cache/swift owner=swift group=swift state=directory - recurse=yes |