diff options
Diffstat (limited to 'install-files/swift/usr/share/swift/etc/swift/container-server.j2')
| -rw-r--r-- | install-files/swift/usr/share/swift/etc/swift/container-server.j2 | 211 |
1 files changed, 0 insertions, 211 deletions
diff --git a/install-files/swift/usr/share/swift/etc/swift/container-server.j2 b/install-files/swift/usr/share/swift/etc/swift/container-server.j2 deleted file mode 100644 index 3c63b7d0..00000000 --- a/install-files/swift/usr/share/swift/etc/swift/container-server.j2 +++ /dev/null @@ -1,211 +0,0 @@ -[DEFAULT] -# bind_ip = 0.0.0.0 -bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} -bind_port = 6001 -# bind_timeout = 30 -# backlog = 4096 -user = swift -swift_dir = /etc/swift -devices = /srv/node -# mount_check = true -# disable_fallocate = false -# -# Use an integer to override the number of pre-forked processes that will -# accept connections. -# workers = auto -# -# Maximum concurrent requests per worker -# max_clients = 1024 -# -# This is a comma separated list of hosts allowed in the X-Container-Sync-To -# field for containers. This is the old-style of using container sync. It is -# strongly recommended to use the new style of a separate -# container-sync-realms.conf -- see container-sync-realms.conf-sample -# allowed_sync_hosts = 127.0.0.1 -# -# You can specify default log routing here if you want: -# log_name = swift -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# The following caps the length of log lines to the value given; no limit if -# set to 0, the default. -# log_max_line_length = 0 -# -# comma separated list of functions to call to setup custom log handlers. -# functions get passed: conf, name, log_to_console, log_route, fmt, logger, -# adapted_logger -# log_custom_handlers = -# -# If set, log_udp_host will override log_address -# log_udp_host = -# log_udp_port = 514 -# -# You can enable StatsD logging here: -# log_statsd_host = localhost -# log_statsd_port = 8125 -# log_statsd_default_sample_rate = 1.0 -# log_statsd_sample_rate_factor = 1.0 -# log_statsd_metric_prefix = -# -# If you don't mind the extra disk space usage in overhead, you can turn this -# on to preallocate disk space with SQLite databases to decrease fragmentation. -# db_preallocation = off -# -# eventlet_debug = false -# -# You can set fallocate_reserve to the number of bytes you'd like fallocate to -# reserve, whether there is space for the given file size or not. -# fallocate_reserve = 0 - -[pipeline:main] -pipeline = healthcheck recon container-server - -[app:container-server] -use = egg:swift#container -# You can override the default log routing for this app here: -# set log_name = container-server -# set log_facility = LOG_LOCAL0 -# set log_level = INFO -# set log_requests = true -# set log_address = /dev/log -# -# node_timeout = 3 -# conn_timeout = 0.5 -# allow_versions = false -# auto_create_account_prefix = . -# -# Configure parameter for creating specific server -# To handle all verbs, including replication verbs, do not specify -# "replication_server" (this is the default). To only handle replication, -# set to a True value (e.g. "True" or "1"). To handle only non-replication -# verbs, set to "False". Unless you have a separate replication network, you -# should not specify any value for "replication_server". -# replication_server = false - -[filter:healthcheck] -use = egg:swift#healthcheck -# An optional filesystem path, which if present, will cause the healthcheck -# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" -# disable_path = - -[filter:recon] -use = egg:swift#recon -recon_cache_path = /var/cache/swift - -[container-replicator] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-replicator -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# vm_test_mode = no -# per_diff = 1000 -# max_diffs = 100 -# concurrency = 8 -# interval = 30 -# node_timeout = 10 -# conn_timeout = 0.5 -# -# The replicator also performs reclamation -# reclaim_age = 604800 -# -# Time in seconds to wait between replication passes -# Note: if the parameter 'interval' is defined then it will be used in place -# of run_pause. -# run_pause = 30 -# -# recon_cache_path = /var/cache/swift - -[container-updater] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-updater -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# interval = 300 -# concurrency = 4 -# node_timeout = 3 -# conn_timeout = 0.5 -# -# slowdown will sleep that amount between containers -# slowdown = 0.01 -# -# Seconds to suppress updating an account that has generated an error -# account_suppression_time = 60 -# -# recon_cache_path = /var/cache/swift - -[container-auditor] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-auditor -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# Will audit each container at most once per interval -# interval = 1800 -# -# containers_per_second = 200 -# recon_cache_path = /var/cache/swift - -[container-sync] -# You can override the default log routing for this app here (don't use set!): -# log_name = container-sync -# log_facility = LOG_LOCAL0 -# log_level = INFO -# log_address = /dev/log -# -# If you need to use an HTTP Proxy, set it here; defaults to no proxy. -# You can also set this to a comma separated list of HTTP Proxies and they will -# be randomly used (simple load balancing). -# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888 -# -# Will sync each container at most once per interval -# interval = 300 -# -# Maximum amount of time to spend syncing each container per pass -# container_time = 60 -# -# Maximum amount of time in seconds for the connection attempt -# conn_timeout = 5 -# Server errors from requests will be retried by default -# request_tries = 3 -# -# Internal client config file path -# internal_client_conf_path = /etc/swift/internal-client.conf - -# Note: Put it at the beginning of the pipeline to profile all middleware. But -# it is safer to put this after healthcheck. -[filter:xprofile] -use = egg:swift#xprofile -# This option enable you to switch profilers which should inherit from python -# standard profiler. Currently the supported value can be 'cProfile', -# 'eventlet.green.profile' etc. -# profile_module = eventlet.green.profile -# -# This prefix will be used to combine process ID and timestamp to name the -# profile data file. Make sure the executing user has permission to write -# into this path (missing path segments will be created, if necessary). -# If you enable profiling in more than one type of daemon, you must override -# it with an unique value like: /var/log/swift/profile/container.profile -# log_filename_prefix = /tmp/log/swift/profile/default.profile -# -# the profile data will be dumped to local disk based on above naming rule -# in this interval. -# dump_interval = 5.0 -# -# Be careful, this option will enable profiler to dump data into the file with -# time stamp which means there will be lots of files piled up in the directory. -# dump_timestamp = false -# -# This is the path of the URL to access the mini web UI. -# path = /__profile__ -# -# Clear the data when the wsgi server shutdown. -# flush_at_shutdown = false -# -# unwind the iterator of applications -# unwind = false |