zlib 1.1.3v1.1.3

20 files changed, 2368 insertions, 56 deletions

diff --git a/contrib/README.contrib b/contrib/README.contrib
index dfe9031..7ad191c 100644
--- a/contrib/README.contrib
+++ b/contrib/README.contrib
@@ -7,6 +7,16 @@ for help about these, not the zlib authors. Thanks.
 asm386/     by Gilles Vollant <info@winimage.com>
 	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
 
+asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
+        asm code for Pentium and Pentium Pro
+        See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+delphi/      by Bob Dellaca <bobdl@xtra.co.nz>
+	Support for Delphi
+
+delphi2/     by Davide Moretti <dave@rimini.com>
+        Another support for C++Builder and Delphi
+
 minizip/    by Gilles Vollant <info@winimage.com>
 	Mini zip and unzip based on zlib
         See http://www.winimage.com/zLibDll/unzip.html
diff --git a/contrib/asm586/README.586 b/contrib/asm586/README.586
new file mode 100644
index 0000000..6bb78f3
--- /dev/null
+++ b/contrib/asm586/README.586
@@ -0,0 +1,43 @@
+This is a patched version of zlib modified to use
+Pentium-optimized assembly code in the deflation algorithm. The files
+changed/added by this patch are:
+
+README.586
+match.S
+
+The effectiveness of these modifications is a bit marginal, as the the
+program's bottleneck seems to be mostly L1-cache contention, for which
+there is no real way to work around without rewriting the basic
+algorithm. The speedup on average is around 5-10% (which is generally
+less than the amount of variance between subsequent executions).
+However, when used at level 9 compression, the cache contention can
+drop enough for the assembly version to achieve 10-20% speedup (and
+sometimes more, depending on the amount of overall redundancy in the
+files). Even here, though, cache contention can still be the limiting
+factor, depending on the nature of the program using the zlib library.
+This may also mean that better improvements will be seen on a Pentium
+with MMX, which suffers much less from L1-cache contention, but I have
+not yet verified this.
+
+Note that this code has been tailored for the Pentium in particular,
+and will not perform well on the Pentium Pro (due to the use of a
+partial register in the inner loop).
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o
diff --git a/contrib/asm586/match.S b/contrib/asm586/match.S
new file mode 100644
index 0000000..8f16140
--- /dev/null
+++ b/contrib/asm586/match.S
@@ -0,0 +1,354 @@
+/* match.s -- Pentium-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	wmask			0	/* local copy of s->wmask	*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	chainlenscanend		12	/* high word: current chain len	*/
+					/* low word: last bytes sought	*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the scanend	*/
+/* scanend value, which it will always accompany.			*/
+
+		decl	%ebx
+		shll	$16, %ebx
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+
+		movw	(%edi), %bx
+		movw	%bx, scanstart(%esp)
+		movw	-1(%edi,%eax), %bx
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Posf *prev = s->prev;						*/
+/* uInt wmask = s->w_mask;						*/
+
+		movl	dsPrev(%edx), %edi
+		movl	dsWMask(%edx), %edx
+		mov	%edx, wmask(%esp)
+
+/* Jump into the main loop.						*/
+
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
+ * %ecx = curmatch
+ * %edx = curmatch & wmask
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ *
+ * Two optimization notes on the choice of instructions:
+ *
+ * The first instruction uses a 16-bit address, which costs an extra,
+ * unpairable cycle. This is cheaper than doing a 32-bit access and
+ * zeroing the high word, due to the 3-cycle misalignment penalty which
+ * would occur half the time. This also turns out to be cheaper than
+ * doing two separate 8-bit accesses, as the memory is so rarely in the
+ * L1 cache.
+ *
+ * The window buffer, however, apparently spends a lot of time in the
+ * cache, and so it is faster to retrieve the word at the end of the
+ * match string with two 8-bit loads. The instructions that test the
+ * word at the beginning of the match string, however, are executed
+ * much less frequently, and there it was cheaper to use 16-bit
+ * instructions, which avoided the necessity of saving off and
+ * subsequently reloading one of the other registers.
+ */
+LookupLoop:
+							/* 1 U & V  */
+		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
+		movl	wmask(%esp), %edx		/* 2 V pipe */
+		cmpl	%ebp, %ecx			/* 3 U pipe */
+		jbe	LeaveNow			/* 3 V pipe */
+		subl	$0x00010000, %ebx		/* 4 U pipe */
+		js	LeaveNow			/* 4 V pipe */
+LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
+		andl	%ecx, %edx			/* 5 V pipe */
+		cmpb	%bl, %al			/* 6 U pipe */
+		jnz	LookupLoop			/* 6 V pipe */
+		movb	(%esi,%ecx), %ah
+		cmpb	%bh, %ah
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movw	(%eax,%ecx), %ax
+		cmpw	scanstart(%esp), %ax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		movl	(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		movl	4(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	chainlenscanend(%esp), %ebx
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movl	chainlenscanend(%esp), %ebx
+		movw	-1(%edi,%eax), %bx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, chainlenscanend(%esp)
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret
diff --git a/contrib/asm686/README.686 b/contrib/asm686/README.686
new file mode 100644
index 0000000..a593f23
--- /dev/null
+++ b/contrib/asm686/README.686
@@ -0,0 +1,34 @@
+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o
diff --git a/contrib/asm686/match.S b/contrib/asm686/match.S
new file mode 100644
index 0000000..8e86c33
--- /dev/null
+++ b/contrib/asm686/match.S
@@ -0,0 +1,327 @@
+/* match.s -- Pentium-Pro-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	chainlenwmask		0	/* high word: current chain len	*/
+					/* low word: s->wmask		*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanend			12	/* last two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask(%edx), %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%ebx
+		shll	$16, %ebx
+		orl	%eax, %ebx
+		movl	%ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%edi), %ebx
+		movl	%ebx, scanstart(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	%ebx, scanend(%esp)
+		movl	dsPrev(%edx), %edi
+
+/* Jump into the main loop.						*/
+
+		movl	chainlenwmask(%esp), %edx
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+		andl	%edx, %ecx
+		movzwl	(%edi,%ecx,2), %ecx
+		cmpl	%ebp, %ecx
+		jbe	LeaveNow
+		subl	$0x00010000, %edx
+		js	LeaveNow
+LoopEntry:	movzwl	-1(%esi,%ecx), %eax
+		cmpl	%ebx, %eax
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movzwl	(%eax,%ecx), %eax
+		cmpl	scanstart(%esp), %eax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		xorl	(%edi,%edx), %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		xorl	4(%edi,%edx), %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	scanend(%esp), %ebx
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, scanend(%esp)
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret
diff --git a/contrib/delphi/zlib.mak b/contrib/delphi/zlib.mak
new file mode 100644
index 0000000..ba557e2
--- /dev/null
+++ b/contrib/delphi/zlib.mak
@@ -0,0 +1,36 @@
+# Makefile for zlib32bd.lib
+# ------------- Borland C++ 4.5 -------------
+
+# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
+# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
+# convention.
+
+CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
+CC=f:\bc45\bin\bcc32
+LIBFLAGS= /C
+LIB=f:\bc45\bin\tlib
+ZLIB=zlib32bd.lib
+
+.autodepend
+.c.obj:
+        $(CC) -c $(CFLAGS) $<
+
+OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
+OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
+OBJ3=trees.obj uncompr.obj zutil.obj
+pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
+pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
+pOBJ3=+trees.obj+uncompr.obj+zutil.obj
+
+all: $(ZLIB)
+
+$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
+        @if exist $@ del $@
+        $(LIB) @&&|
+$@ $(LIBFLAGS) &
+$(pOBJ1) &
+$(pOBJ2) &
+$(pOBJ3)
+|
+
+# End of makefile for zlib32bd.lib
diff --git a/contrib/delphi/zlibdef.pas b/contrib/delphi/zlibdef.pas
new file mode 100644
index 0000000..4f96b7d
--- /dev/null
+++ b/contrib/delphi/zlibdef.pas
@@ -0,0 +1,169 @@
+unit zlibdef;
+
+interface
+
+uses
+  Windows;
+
+const
+  ZLIB_VERSION = '1.1.3';
+
+type
+  voidpf = Pointer;
+  int    = Integer;
+  uInt   = Cardinal;
+  pBytef = PChar;
+  uLong  = Cardinal;
+
+  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
+                    stdcall;
+  free_func  = procedure(opaque, address: voidpf);
+                    stdcall;
+
+  internal_state = Pointer;
+
+  z_streamp = ^z_stream;
+  z_stream = packed record
+    next_in: pBytef;          // next input byte
+    avail_in: uInt;           // number of bytes available at next_in
+    total_in: uLong;          // total nb of input bytes read so far
+
+    next_out: pBytef;         // next output byte should be put there
+    avail_out: uInt;          // remaining free space at next_out
+    total_out: uLong;         // total nb of bytes output so far
+
+    msg: PChar;               // last error message, NULL if no error
+    state: internal_state;    // not visible by applications
+
+    zalloc: alloc_func;       // used to allocate the internal state
+    zfree: free_func;         // used to free the internal state
+    opaque: voidpf;           // private data object passed to zalloc and zfree
+
+    data_type: int;           // best guess about the data type: ascii or binary
+    adler: uLong;             // adler32 value of the uncompressed data
+    reserved: uLong;          // reserved for future use
+    end;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+
+  Z_NO_COMPRESSION         =  0;
+  Z_BEST_SPEED             =  1;
+  Z_BEST_COMPRESSION       =  9;
+  Z_DEFAULT_COMPRESSION    = -1;
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED    = 8;
+
+  MAX_MEM_LEVEL = 9;
+
+function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function deflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function deflateCopy(dest, source: z_streamp): int;
+             stdcall;
+function deflateEnd(strm: z_streamp): int;
+             stdcall;
+function deflateInit2_(strm: z_streamp; level, method,
+                       windowBits, memLevel, strategy: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateInit_(strm: z_streamp; level: int;
+                      const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateParams(strm: z_streamp; level, strategy: int): int;
+             stdcall;
+function deflateReset(strm: z_streamp): int;
+             stdcall;
+function deflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function inflateEnd(strm: z_streamp): int;
+             stdcall;
+function inflateInit2_(strm: z_streamp; windowBits: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function inflateInit_(strm: z_streamp; const version: PChar;
+                      stream_size: int): int;
+             stdcall;
+function inflateReset(strm: z_streamp): int;
+             stdcall;
+function inflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflateSync(strm: z_streamp): int;
+             stdcall;
+
+function deflateInit(strm: z_streamp; level: int): int;
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+function inflateInit(strm: z_streamp): int;
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+
+implementation
+
+function deflateInit(strm: z_streamp; level: int): int;
+begin
+  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+begin
+  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
+                          strategy, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(strm: z_streamp): int;
+begin
+  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+begin
+  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
+                          sizeof(z_stream));
+end;
+
+const
+  zlibDLL = 'png32bd.dll';
+
+function adler32; external zlibDLL;
+function crc32; external zlibDLL;
+function deflate; external zlibDLL;
+function deflateCopy; external zlibDLL;
+function deflateEnd; external zlibDLL;
+function deflateInit2_; external zlibDLL;
+function deflateInit_; external zlibDLL;
+function deflateParams; external zlibDLL;
+function deflateReset; external zlibDLL;
+function deflateSetDictionary; external zlibDLL;
+function inflate; external zlibDLL;
+function inflateEnd; external zlibDLL;
+function inflateInit2_; external zlibDLL;
+function inflateInit_; external zlibDLL;
+function inflateReset; external zlibDLL;
+function inflateSetDictionary; external zlibDLL;
+function inflateSync; external zlibDLL;
+
+end.
diff --git a/contrib/delphi2/d_zlib.bpr b/contrib/delphi2/d_zlib.bpr
new file mode 100644
index 0000000..78bb254
--- /dev/null
+++ b/contrib/delphi2/d_zlib.bpr
@@ -0,0 +1,224 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = d_zlib.lib
+OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
+  inflate.obj inftrees.obj infutil.obj trees.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -pr -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------
diff --git a/contrib/delphi2/d_zlib.cpp b/contrib/delphi2/d_zlib.cpp
new file mode 100644
index 0000000..f5dea59
--- /dev/null
+++ b/contrib/delphi2/d_zlib.cpp
@@ -0,0 +1,17 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("deflate.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+
diff --git a/contrib/delphi2/readme.txt b/contrib/delphi2/readme.txt
new file mode 100644
index 0000000..cbd3162
--- /dev/null
+++ b/contrib/delphi2/readme.txt
@@ -0,0 +1,17 @@
+These are files used to compile zlib under Borland C++ Builder 3.
+
+zlib.bpg is the main project group that can be loaded in the BCB IDE and
+loads all other *.bpr projects
+
+zlib.bpr is a project used to create a static zlib.lib library with C calling
+convention for functions.
+
+zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
+calling convention.
+
+d_zlib.bpr creates a set of .obj files with register calling convention.
+These files are used by zlib.pas to create a Delphi unit containing zlib.
+The d_zlib.lib file generated isn't useful and can be deleted.
+
+zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
+
diff --git a/contrib/delphi2/zlib.bpg b/contrib/delphi2/zlib.bpg
new file mode 100644
index 0000000..b6c9acd
--- /dev/null
+++ b/contrib/delphi2/zlib.bpg
@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = zlib zlib32 d_zlib
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+zlib: zlib.bpr
+  $(MAKE)
+
+zlib32: zlib32.bpr
+  $(MAKE)
+
+d_zlib: d_zlib.bpr
+  $(MAKE)
+
+
diff --git a/contrib/delphi2/zlib.bpr b/contrib/delphi2/zlib.bpr
new file mode 100644
index 0000000..cf3945b
--- /dev/null
+++ b/contrib/delphi2/zlib.bpr
@@ -0,0 +1,225 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib.lib
+OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------
diff --git a/contrib/delphi2/zlib.cpp b/contrib/delphi2/zlib.cpp
new file mode 100644
index 0000000..bf6953b
--- /dev/null
+++ b/contrib/delphi2/zlib.cpp
@@ -0,0 +1,22 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+
diff --git a/contrib/delphi2/zlib.pas b/contrib/delphi2/zlib.pas
new file mode 100644
index 0000000..10ae4ca
--- /dev/null
+++ b/contrib/delphi2/zlib.pas
@@ -0,0 +1,534 @@
+{*******************************************************}
+{                                                       }
+{       Delphi Supplemental Components                  }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997 Borland International        }
+{                                                       }
+{*******************************************************}
+
+{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
+
+unit zlib;
+
+interface
+
+uses Sysutils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
+  TFree = procedure (AppData, Block: Pointer);
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Integer;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Integer;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   //  best guess about the data type: ascii or binary
+    adler: Integer;       // adler32 value of the uncompressed data
+    reserved: Integer;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+const
+  zlib_version = '1.1.3';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
+
+implementation
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+  _z_errmsg: array[0..9] of PChar = (
+    'need dictionary',      // Z_NEED_DICT      (2)
+    'stream end',           // Z_STREAM_END     (1)
+    '',                     // Z_OK             (0)
+    'file error',           // Z_ERRNO          (-1)
+    'stream error',         // Z_STREAM_ERROR   (-2)
+    'data error',           // Z_DATA_ERROR     (-3)
+    'insufficient memory',  // Z_MEM_ERROR      (-4)
+    'buffer error',         // Z_BUF_ERROR      (-5)
+    'incompatible version', // Z_VERSION_ERROR  (-6)
+    ''
+  );
+
+{$L deflate.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L adler32.obj}
+{$L infblock.obj}
+{$L infcodes.obj}
+{$L infutil.obj}
+{$L inffast.obj}
+
+procedure _tr_init; external;
+procedure _tr_tally; external;
+procedure _tr_flush_block; external;
+procedure _tr_align; external;
+procedure _tr_stored_block; external;
+function adler32; external;
+procedure inflate_blocks_new; external;
+procedure inflate_blocks; external;
+procedure inflate_blocks_reset; external;
+procedure inflate_blocks_free; external;
+procedure inflate_set_dictionary; external;
+procedure inflate_trees_bits; external;
+procedure inflate_trees_dynamic; external;
+procedure inflate_trees_fixed; external;
+procedure inflate_codes_new; external;
+procedure inflate_codes; external;
+procedure inflate_codes_free; external;
+procedure _inflate_mask; external;
+procedure inflate_flush; external;
+procedure inflate_fast; external;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
+begin
+  GetMem(Result, Items*Size);
+end;
+
+procedure zcfree(AppData, Block: Pointer);
+begin
+  FreeMem(Block);
+end;
+
+function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+        begin
+          Result := Count - FZRec.avail_out;
+          Exit;
+        end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    DCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.Create('Invalid stream operation');
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.Create('Invalid stream operation');
+  Result := FZRec.total_out;
+end;
+
+end.
diff --git a/contrib/delphi2/zlib32.bpr b/contrib/delphi2/zlib32.bpr
new file mode 100644
index 0000000..cabcec4
--- /dev/null
+++ b/contrib/delphi2/zlib32.bpr
@@ -0,0 +1,174 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib32.dll
+OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
+CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
+CFLAG3 = -ff -5
+PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
+  -JPHN -M
+RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
+AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
+LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
+IFLAGS = -Gn -g
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=1
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=DLL (GUI)
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=1
+Item0=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib
+
+[HistoryLists\hlConditionals]
+Count=1
+Item0=_NO_VCL;ZLIB_DLL
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------
diff --git a/contrib/delphi2/zlib32.cpp b/contrib/delphi2/zlib32.cpp
new file mode 100644
index 0000000..7372f6b
--- /dev/null
+++ b/contrib/delphi2/zlib32.cpp
@@ -0,0 +1,42 @@
+
+#include <windows.h>
+#pragma hdrstop
+#include <condefs.h>
+
+
+//---------------------------------------------------------------------------
+//   Important note about DLL memory management in a VCL DLL:
+//
+//
+//
+// If your DLL uses VCL and exports any functions that pass VCL String objects
+// (or structs/classes containing nested Strings) as parameter or function
+// results, you will need to build both your DLL project and any EXE projects
+// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
+// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
+// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
+// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
+// these situations, pass string information using "char *" or ShortString
+// parameters and then link with the static RTL.
+//
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#pragma argsused
+int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
+{
+        return 1;
+}
diff --git a/contrib/minizip/unzip.c b/contrib/minizip/unzip.c
index 78a8473..ff71a47 100644
--- a/contrib/minizip/unzip.c
+++ b/contrib/minizip/unzip.c
@@ -315,7 +315,7 @@ local uLong unzlocal_SearchCentralDir(fin)
 		if (fread(buf,(uInt)uReadSize,1,fin)!=1)
 			break;
 
-		for (i=0;i<(int)uReadSize-3;i++)
+                for (i=(int)uReadSize-3; (i--)>0;)
 			if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && 
 				((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
 			{
diff --git a/contrib/minizip/zip.c b/contrib/minizip/zip.c
index ddb2334..0cae64a 100644
--- a/contrib/minizip/zip.c
+++ b/contrib/minizip/zip.c
@@ -242,6 +242,8 @@ local int write_datablock(fout,ll)
    Outputs a long in LSB order to the given file
    nbByte == 1, 2 or 4 (byte, short or long)
 */
+
+local int ziplocal_putValue OF((FILE *file, uLong x, int nbByte));
 local int ziplocal_putValue (file, x, nbByte)
     FILE *file;
     uLong x;
@@ -259,7 +261,7 @@ local int ziplocal_putValue (file, x, nbByte)
         return ZIP_OK;
 }
 
-
+local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
 local void ziplocal_putValue_inmemory (dest, x, nbByte)
     void* dest;
     uLong x;
@@ -390,34 +392,34 @@ extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi,
     zi->ci.pos_local_header = ftell(zi->filezip);
     zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + 
                                       size_extrafield_global + size_comment;
-    zi->ci.central_header = (char*)ALLOC(zi->ci.size_centralheader);
+    zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
 
-    ziplocal_putValue_inmemory(zi->ci.central_header,CENTRALHEADERMAGIC,4);
+    ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
     /* version info */
-    ziplocal_putValue_inmemory(zi->ci.central_header+4,VERSIONMADEBY,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+6,20,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+8,zi->ci.flag,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+10,zi->ci.method,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+12,zi->ci.dosDate,4);
-    ziplocal_putValue_inmemory(zi->ci.central_header+16,0,4); /*crc*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+20,0,4); /*compr size*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+24,0,4); /*uncompr size*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+28,size_filename,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+30,size_extrafield_global,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+32,size_comment,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+34,0,2); /*disk nm start*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
 
     if (zipfi==NULL)
-        ziplocal_putValue_inmemory(zi->ci.central_header+36,0,2); 
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); 
     else
-        ziplocal_putValue_inmemory(zi->ci.central_header+36,zipfi->internal_fa,2); 
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); 
 
     if (zipfi==NULL)
-        ziplocal_putValue_inmemory(zi->ci.central_header+38,0,4); 
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); 
     else
-        ziplocal_putValue_inmemory(zi->ci.central_header+38,zipfi->external_fa,4);
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
 
-    ziplocal_putValue_inmemory(zi->ci.central_header+42,zi->ci.pos_local_header,4);
+    ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header,4);
 
     for (i=0;i<size_filename;i++)
         *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
@@ -433,25 +435,25 @@ extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi,
         return ZIP_INTERNALERROR;
 
     /* write the local header */
-    err = ziplocal_putValue(zi->filezip,LOCALHEADERMAGIC,4);
+    err = ziplocal_putValue(zi->filezip,(uLong)LOCALHEADERMAGIC,4);
 
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,20,2);/* version needed to extract */
+        err = ziplocal_putValue(zi->filezip,(uLong)20,2);/* version needed to extract */
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,zi->ci.flag,2);
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.flag,2);
 
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,zi->ci.method,2);
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.method,2);
 
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,zi->ci.dosDate,4);
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.dosDate,4);
 
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,0,4); /* crc 32, unknown */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* crc 32, unknown */
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,0,4); /* compressed size, unknown */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* compressed size, unknown */
     if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,0,4); /* uncompressed size, unknown */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* uncompressed size, unknown */
 
     if (err==ZIP_OK)
         err = ziplocal_putValue(zi->filezip,(uLong)size_filename,2);
@@ -481,7 +483,7 @@ extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi,
         zi->ci.stream.opaque = (voidpf)0;
 
         err = deflateInit2(&zi->ci.stream, level,
-               Z_DEFLATED, -MAX_WBITS, /*DEF_MEM_LEVEL*/8, 0);
+               Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
 
         if (err==Z_OK)
             zi->ci.stream_initialised = 1;
@@ -528,7 +530,7 @@ extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
         {
             uLong uTotalOutBefore = zi->ci.stream.total_out;
             err=deflate(&zi->ci.stream,  Z_NO_FLUSH);
-            zi->ci.pos_in_buffered_data += zi->ci.stream.total_out - uTotalOutBefore ;
+            zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
 
         }
         else
@@ -585,7 +587,7 @@ extern int ZEXPORT zipCloseFileInZip (file)
         }
         uTotalOutBefore = zi->ci.stream.total_out;
         err=deflate(&zi->ci.stream,  Z_FINISH);
-        zi->ci.pos_in_buffered_data += zi->ci.stream.total_out - uTotalOutBefore ;
+        zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
     }
 
     if (err==Z_STREAM_END)
@@ -602,11 +604,11 @@ extern int ZEXPORT zipCloseFileInZip (file)
         zi->ci.stream_initialised = 0;
     }
 
-    ziplocal_putValue_inmemory(zi->ci.central_header+16,zi->ci.crc32,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)zi->ci.crc32,4); /*crc*/
     ziplocal_putValue_inmemory(zi->ci.central_header+20,
-                                zi->ci.stream.total_out,4); /*compr size*/
+                                (uLong)zi->ci.stream.total_out,4); /*compr size*/
     ziplocal_putValue_inmemory(zi->ci.central_header+24,
-                                zi->ci.stream.total_in,4); /*uncompr size*/
+                                (uLong)zi->ci.stream.total_in,4); /*uncompr size*/
 
     if (err==ZIP_OK)
         err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
@@ -621,13 +623,13 @@ extern int ZEXPORT zipCloseFileInZip (file)
 		    err = ZIP_ERRNO;
 
         if (err==ZIP_OK)
-            err = ziplocal_putValue(zi->filezip,zi->ci.crc32,4); /* crc 32, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.crc32,4); /* crc 32, unknown */
 
         if (err==ZIP_OK) /* compressed size, unknown */
-            err = ziplocal_putValue(zi->filezip,zi->ci.stream.total_out,4); 
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_out,4); 
 
         if (err==ZIP_OK) /* uncompressed size, unknown */
-            err = ziplocal_putValue(zi->filezip,zi->ci.stream.total_in,4);
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_in,4);
 
 	    if (fseek(zi->filezip,
                   cur_pos_inzip,SEEK_SET)!=0)
@@ -682,26 +684,26 @@ extern int ZEXPORT zipClose (file, global_comment)
     free_datablock(zi->central_dir.first_block);
 
     if (err==ZIP_OK) /* Magic End */
-        err = ziplocal_putValue(zi->filezip,ENDHEADERMAGIC,4);
+        err = ziplocal_putValue(zi->filezip,(uLong)ENDHEADERMAGIC,4);
 
     if (err==ZIP_OK) /* number of this disk */
-        err = ziplocal_putValue(zi->filezip,0,2);
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
 
     if (err==ZIP_OK) /* number of the disk with the start of the central directory */
-        err = ziplocal_putValue(zi->filezip,0,2);
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
 
     if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
-        err = ziplocal_putValue(zi->filezip,zi->number_entry,2);
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
 
     if (err==ZIP_OK) /* total number of entries in the central dir */
-        err = ziplocal_putValue(zi->filezip,zi->number_entry,2);
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
 
     if (err==ZIP_OK) /* size of the central directory */
-        err = ziplocal_putValue(zi->filezip,size_centraldir,4);
+        err = ziplocal_putValue(zi->filezip,(uLong)size_centraldir,4);
 
     if (err==ZIP_OK) /* offset of start of central directory with respect to the 
 	                        starting disk number */
-        err = ziplocal_putValue(zi->filezip,centraldir_pos_inzip ,4);
+        err = ziplocal_putValue(zi->filezip,(uLong)centraldir_pos_inzip ,4);
 
     if (err==ZIP_OK) /* zipfile comment length */
         err = ziplocal_putValue(zi->filezip,(uLong)size_global_comment,2);
diff --git a/contrib/untgz/untgz.c b/contrib/untgz/untgz.c
index 6fa9a5d..4a431ff 100644
--- a/contrib/untgz/untgz.c
+++ b/contrib/untgz/untgz.c
@@ -9,7 +9,6 @@
 #include <stdlib.h>
 #include <string.h>
 #include <time.h>
-#include <utime.h>
 #include <errno.h>
 #include <fcntl.h>
 #ifdef unix
@@ -21,6 +20,23 @@
 
 #include "zlib.h"
 
+#ifdef WIN32
+#  ifndef F_OK
+#    define F_OK (0)
+#  endif
+#  ifdef _MSC_VER
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#    define strdup(str)         _strdup(str)
+#    define unlink(fn)          _unlink(fn)
+#    define access(path,mode)   _access(path,mode)
+#  else
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#  endif
+#else
+#  include <utime.h>
+#endif
+
+
 /* Values used in typeflag field.  */
 
 #define REGTYPE	 '0'		/* regular file */
@@ -83,7 +99,7 @@ char *prog;
 
 /* This will give a benign warning */
 
-static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", NULL };
+static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", ".tar", NULL };
 
 /* Return the real name of the TGZ archive */
 /* or NULL if it does not exist. */
@@ -272,14 +288,6 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
       if (len < 0)
 	error (gzerror(in, &err));
       /*
-       * if we met the end of the tar
-       * or the end-of-tar block,
-       * we are done
-       */
-      if ((len == 0)  || (buffer.header.name[0]== 0))
-	break;
-      
-      /*
        * Always expect complete blocks to process
        * the tar information.
        */
@@ -291,6 +299,13 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
        */
       if (getheader == 1)
 	{
+	  /*
+	   * if we met the end of the tar
+	   * or the end-of-tar block,
+	   * we are done
+	   */
+	  if ((len == 0)  || (buffer.header.name[0]== 0)) break;
+
 	  tartime = (time_t)getoct(buffer.header.mtime,12);
 	  strcpy(fname,buffer.header.name);
 	  
@@ -360,6 +375,34 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 	      getheader = 1;
 	      if ((action == TGZ_EXTRACT) && (outfile != NULL))
 		{
+#ifdef WIN32
+		  HANDLE hFile;
+		  FILETIME ftm,ftLocal;
+		  SYSTEMTIME st;
+		  struct tm localt;
+ 
+		  fclose(outfile);
+
+		  localt = *localtime(&tartime);
+
+		  hFile = CreateFile(fname, GENERIC_READ | GENERIC_WRITE,
+				     0, NULL, OPEN_EXISTING, 0, NULL);
+		  
+		  st.wYear = (WORD)localt.tm_year+1900;
+		  st.wMonth = (WORD)localt.tm_mon;
+		  st.wDayOfWeek = (WORD)localt.tm_wday;
+		  st.wDay = (WORD)localt.tm_mday;
+		  st.wHour = (WORD)localt.tm_hour;
+		  st.wMinute = (WORD)localt.tm_min;
+		  st.wSecond = (WORD)localt.tm_sec;
+		  st.wMilliseconds = 0;
+		  SystemTimeToFileTime(&st,&ftLocal);
+		  LocalFileTimeToFileTime(&ftLocal,&ftm);
+		  SetFileTime(hFile,&ftm,NULL,&ftm);
+		  CloseHandle(hFile);
+
+		  outfile = NULL;
+#else
 		  struct utimbuf settime;
 
 		  settime.actime = settime.modtime = tartime;
@@ -367,6 +410,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 		  fclose(outfile);
 		  outfile = NULL;
 		  utime(fname,&settime);
+#endif
 		}
 	    }
 	}
diff --git a/contrib/visual-basic.txt b/contrib/visual-basic.txt
index 18aa084..10fb44b 100644
--- a/contrib/visual-basic.txt
+++ b/contrib/visual-basic.txt
@@ -1,5 +1,17 @@
+See below some functions declarations for Visual Basic.
+
+Frequently Asked Question:
+
+Q: Each time I use the compress function I get the -5 error (not enough
+   room in the output buffer).
+
+A: Make sure that the length of the compressed buffer is passed by
+   reference ("as any"), not by value ("as long"). Also check that
+   before the call of compress this length is equal to the total size of
+   the compressed buffer and not zero.
+
+
 From: "Jon Caruana" <jon-net@usa.net>
-To: "Jean-loup Gailly" <gzip@prep.ai.mit.edu>
 Subject: Re: How to port zlib declares to vb?
 Date: Mon, 28 Oct 1996 18:33:03 -0600