diff options
Diffstat (limited to 'amiga/smakefile')
| -rw-r--r-- | amiga/smakefile | 662 |
1 files changed, 662 insertions, 0 deletions
diff --git a/amiga/smakefile b/amiga/smakefile new file mode 100644 index 0000000..ce1317d --- /dev/null +++ b/amiga/smakefile @@ -0,0 +1,662 @@ +#=========================================================================== +# Makefile for Zip, ZipNote, ZipCloak, ZipSplit AMIGA SAS/C Version 6.58 +# Version: 2.3 last revised: 07 Jan 2007 +#=========================================================================== +# -John Bush, <John.Bush@East.Sun.COM> +# or: <JBush@Bix.COM> + +# updated for SAS/C Version 6.56+ and AmigaDOS 3.1 (V40) +# by Haidinger Walter, <walthaid@unix.ict.tuwien.ac.at> + +# additional supplements and maintenance by Paul Kienitz + +# This makefile should work with at least AmigaDOS 2.04 (V37) (not tested) +# and will probably not work with AmigaDOS 1.3 (V34) + +# If you have any improvements, critics or else please feel free to mail. +# Any response is appreciated. Haidinger Walter <walthaid@unix.ict.tuwien.ac.at> + +# Available targets: +# all builds all executeables below +# zip builds zip executeable +# zipsplit builds zipsplit executeable +# zipcloak builds zipcloak executeable +# zipnote builds zipnote executeable +# ziplm builds low memory version of zip executable +# clean remove all files created by the compilation +# spotless like clean target but removes binaries too + + +########################## +# USER MACRO DEFINITIONS # +########################## + +# *** NOTE *** +# The assembly version is not implemented yet. +# (Un)commenting the assembler macros has no effect unless the +# file dependencies are changed too. +# Most of the amiga/*.a files do not assmble with 68000 instructions. +# Any help is appreciated, of course. + +# Set the processor to generate code for. +# Compiler: ANY 68000 68010 68020 68030 68040 68060 +# Assembler: 0 0 1 2 3 4 n/a +# Defaults: ANY and 0 +# +CUSECPU = ANY +AUSECPU = 0 + +# UNCOMMENT to use 68020 instructions in the assembly version of deflate.o +# Only use if code is generated for 68020 or higher processors above. +# Note: You could use CPUTEST too to enable runtime cpu detection. +# However, it is not recommended since both 68000 and 68020 code will be +# included which would be an unnecessary increase in size. +# (see amiga/deflate.a for more information) +# +#AUSE020 = CPU020 + +# To disable the assembler replacements and use the standard C source, +# you have to change the Zip and ZipLM dependencies. See below for details. +# (remember that assembler use is *not* implemented yet) + +# Uncomment both CUTIL and LUTIL to make use of utility.library of OS 2.04+ +# The utility.library is *not* used for UnZipSFX to ensure maximum portability +# between the different Amiga systems (minimal config: 68000 and OS 1.2). +# You can change this by adding the $(LUTIL) macro in the UnZipSFX linking +# rules (See below: Final output targets, UnZipSFX:). +# WARNINGS when using the utility library: +# 1. All Executables will *only* work with AmigaDOS 2.04 (v37) or higher. +# 2. You *need not* compile/link with short-integers using the +# utility.library. It will crash your machine. See Libraries below. +# +# Default: commented (not used) +# +#CUTIL = UTILLIB DEFINE=_UTILLIB +#LUTIL = WITH SC:LIB/utillib.with # include necessary linker defines +# Choose one stack-handling method (default=faster) +# StackExtend: Dynamic runtime stack extension. You won't notice stack overflows. +# StackCheck: On a stack overflow a requester appears which allows you to exit. +# Note that either stack watching will slow down your executable because of the +# extra code run on each function entry. On the other hand, you won't crash +# anymore due to stack overflows. However, you should not have *any* stack +# problems with Info-ZIP programs if you raise your stack to 10000 (which I'd +# recommend as a minimum default stack for all applications) or more using the +# shell stack command. Type 'Stack 20000' or add it to your S:Shell-Startup. +# BTW: Typing 'Stack' prints your current stack size. +# +CSTACK = NOSTACKCHECK STACKEXTEND # slow, but always works +#CSTACK = STACKCHECK NOSTACKEXTEND # slow, requester & graceful exit +#CSTACK = NOSTACKCHECK NOSTACKEXTEND # faster but relies on larger stack (>=10K) + + +# +# LIBRARIES +# --------- + +# Choose one DATAOPTS , SASLIB , ASMOPTS and LSTARTUP +# Always comment/uncomment all macros of a set. + +# Library to use with near data and 2-byte integers +# Notes: o slower than 4-byte integers with 68000 cpu +# o *not* recommended due to poor overall performance +# o see comment in amiga/osdep.h +#DATAOPTS = DATA=NEAR SHORTINTEGERS DEF=_NEAR_DATA +#SASLIB = scs +#ASMOPTS = -dINT16 +#LSTARTUP = cres.o + +# Library to use with near data and 4-byte integers (DEFAULT) +# *** use this with the utility.library *** +DATAOPTS = DATA=NEAR DEF=_NEAR_DATA +SASLIB = sc +ASMOPTS = +LSTARTUP = cres.o + +# Library to use with far data and 2-byte integers +# use if DYN_ALLOC is not defined +# old default - far data always works but is slower +#DATAOPTS = DATA=FAR SHORTINTEGERS DEF=_FAR_DATA +#SASLIB = scsnb +#ASMOPTS = -dINT16 +#LSTARTUP = c.o + +# Library to use with far data and 4-byte integers +# if everything else fails: try this +#DATAOPTS = DATA=FAR DEF=_FAR_DATA +#SASLIB = scnb +#ASMOPTS = +#LSTARTUP = c.o + + +# +# DEBUGGING +# --------- + +# Default: No debugging information added. +# The three macros below will be overwritten if you choose to add +# debug info, therefore no need to comment. + +CDBG = NODEBUG NOPROFILE NOCOVERAGE # default: no debug info +ADBG = +LDBG = STRIPDEBUG # default: no debug info + +# Compiler and loader debug flags. Uncomment as needed. Recomment when done. +# Optimization disabled for faster compilation (by using NOOPT) + +#CDBG1 = DEF=DEBUG DEF=DEBUG_TIME # enables Info-Zip's debug output + +# Enable profiling and coverage when desired. Option COVERAGE commented +# seperately because running coverage may corrupt your drive in case of a +# system crash since a file 'cover.dat' is created in your working directory. +# Note that the use of COVERAGE forces the use of the c.o startup module. + +#CDBG2 = PROFILE +#CDBG3 = COVERAGE # must use c.o startup code: +#LSTARTUP = c.o # Uncomment *only* when you use COVERAGE + +# *Uncomment* here macros CDBG, ADBG and LDBG to include debugging information + +#CDBG = $(CDBG1) $(CDBG2) $(CDBG3) ADDSYM DEBUG=FULLFLUSH STACKCHECK NOOPT +#ADBG = DEBUG +#LDBG = ADDSYM + +# Optional use of memwatch.library which can be found in your +# sc:extras/memlib directory. Please read the short docs (memlib.doc). +# Note that memwatch.library has a small bug: MWTerm() displays always +# the first entry. +# Get the latest version from aminet (dev/debug/memlib.lha) or +# contact me to get the patch. Uncomment all macros to use. +#CMEMLIB = DEFINE=MWDEBUG=1 # define to enable library +#LMEMLIB = SC:LIB/memwatch.lib # path to library +#LSTARTUP = c.o # must use c.o with memlib! + + +# +# MAPPING +# ------- + +# Map filenames used when mapping (no need to comment) +# +MAPFZ = zip.map # Zip map filename +MAPFN = zipnote.map # ZipNote map filename +MAPFC = zipcloak.map # ZipCloak map filename +MAPFS = zipsplit.map # ZipSplit map filename +MAPFL = ziplm.map # Zip low memory version map filename + +# Map file output: Uncomment to highlight and bold headings. +# +#MAPFSTYLE = FANCY + +# Map flags for each EXECUTABLE. Uncomment to enable mapping. +# For map options please refer to: +# SAS/C v6 manual, volume 1: user's guide, chapter 8, page 136: map +# Default: all options enabled: f,h,l,o,s,x +# |-> options start here +#LMAPZ = $(MAPFSTYLE) MAP $(MAPFZ) f,h,l,o,s,x # Zip maps +#LMAPN = $(MAPFSTYLE) MAP $(MAPFN) f,h,l,o,s,x # ZipNote maps +#LMAPC = $(MAPFSTYLE) MAP $(MAPFC) f,h,l,o,s,x # ZipCloak maps +#LMAPS = $(MAPFSTYLE) MAP $(MAPFS) f,h,l,o,s,x # ZipSplit maps +#LMAPL = $(MAPFSTYLE) MAP $(MAPFL) f,h,l,o,s,x # Zip lowmem maps + +# +# LISTINGS +# -------- + +# Listfile-extensions for each executable (enter *with* dot) +# +LISTEXTZ = .lst # extension for Zip listfiles +LISTEXTU = .ulst # extension for utility listfiles (ZipNote,ZipCloak,ZipSplit) +LISTEXTL = .llst # extension for Zip low memory listfiles + + +# List files and cross references for each OBJECT. +# Add/remove flags as needed. Not all listed by default. +# Use LISTINCLUDES to determine the dependencies for smake +# +CLISTOPT = LISTHEADERS LISTMACROS # LISTSYSTEM LISTINCLUDES +CXREFOPT = XHEAD XSYS +# +# Uncomment to enable listing (default: commented) +# *** WARNING: List files require *lots* of disk space! +# +#CLIST = LIST $(CLISTOPT) +#CXREF = XREF $(CXREFOPT) + + +# +# SUPPRESSED COMPILER WARNINGS +# ---------------------------- + +# Compiler warnings to ignore +# +# Warning 105 : module does not define any externally-known symbols +# Warning 304 : Dead assignment eliminated... +# Note 306 : ...function inlined... +# Warning 317 : possibly uninitialized variable... +# Comment to enable. +# +CIGNORE = IGNORE=105,304,306,317 + + +# +# OBJECT EXTENSIONS +# + +# Extensions used for objects of each executeable. +# Transformation rules require unique extensions. +# Enter *with* dot. +# +O = .o # extension for Zip objects +OU = .uo # extension for utility objects (ZipNote, ZipSplit and ZipCloak) +OL = .lo # extension for low memory Zip objects + + +# Filename used to store converted options from environment variable +# LOCAL_ZIP. Default: scoptions_local_zip +# +CWITHOPT = scoptions_local_zip + + +# Filenames to store compiler options to prevent command line overflow +# +# Common options file for Zip and other executables +CFILE = scoptions-zip + + +# Temp filenames for object lists to load using linker "WITH" command. +OBJLISTZ = zip_objlist.with # Zip object list +OBJLISTN = zipnote_objlist.with # ZipNote object list +OBJLISTC = zipcloak_objlist.with # ZipCloak object list +OBJLISTS = zipsplit_objlist.with # ZipSplit object list +OBJLISTL = ziplm_objlist.with # Zip low-mem object list + + +# Filenames to store linker options +# +LWITHZ = zip.lnk # zip linker options +LWITHN = zipnote.lnk # zipnote linker options +LWITHC = zipcloak.lnk # zipcloak linker options +LWITHS = zipsplit.lnk # zipsplit linker options +LWITHL = ziplm.lnk # zip low-mem linker options + + +# Define AMIGA_BETA to print "Beta Notice" up front. See tailor.h. +# Undefine AMIGA_BETA when building a released version. +#CDEFBETA = DEF=AMIGA_BETA + +##################################### +# NOTHING TO CHANGE BEYOND HERE ... # +##################################### +# (except for C/asm dependencies) + +# Define MEDIUM_MEM for production release (per Paul Kienitz). +# This reduces runtime memory requirement but not speed or compression. +# Note: Do *not* use BIG_MEM or MMAP since it isn't yet supported by the + assembler version of deflate.c : amiga/deflate.a +CUSEMEM = DEF=MEDIUM_MEM +AUSEMEM = -DMEDIUM_MEM # for asm deflate.o, must match above + + +# Defines for building low-memory use version of Zip +WSIZEL = WSIZE=4096 # deflate.c window size for low-mem version +CLOWMEM = DEF=SMALL_MEM DEF=$(WSIZEL) +ALOWMEM = -DSMALL_MEM -D$(WSIZEL) # for asm deflate.o, must match above + + +# Compiler definitions +# +CC = sc +# +# Optimizer flags +# +OPTPASSES = 6 # set number of global optimizer passes +# +OPT1 = OPT OPTINL OPTINLOCAL OPTTIME OPTLOOP OPTSCHED +OPT2 = OPTCOMP=$(OPTPASSES) OPTDEP=$(OPTPASSES) OPTRDEP=$(OPTPASSES) +OPT = $(OPT1) $(OPT2) + + +# Compiler flags +# +CDEFINES = $(CMEMLIB) $(CDEFBETA) DEF=AMIGA +COPTIONS = $(DATAOPTS) CODE=NEAR CPU=$(CUSECPU) VERBOSE PARAMETERS=BOTH NOMINC +COPTIONS = $(COPTIONS) ERRORREXX NOERRORCONSOLE MEMSIZE=HUGE $(CLIST) $(CXREF) +COPTIONS = $(COPTIONS) $(CSTACK) $(CUTIL) STRICT UNSCHAR NOICONS STRINGMERGE +CFLAGS = $(CDEFINES) $(COPTIONS) $(OPT) $(CDBG) $(CIGNORE) + + +# Linker definitions +# See SASLIB definition above +# +LD = slink +# special linker flags for pure (i.e. resident) binary. +LDFLAGSS = FROM SC:LIB/$(LSTARTUP) +# common linker flags for all other executeables +LDFLAGSC = FROM SC:LIB/c.o +LDFLAGS2 = NOICONS $(LDBG) +LIBFLAGS = LIB $(LMEMLIB) SC:LIB/$(SASLIB).lib SC:LIB/amiga.lib + + +# Assembler definitions +# +ASM = asm +# +# Options used for assembling amiga/deflate.a +# Must match defines in C-Source. +# +AFLAGS0 = -d__SASC -dSASC -dAMIGA +AFLAGS1 = $(AUSE020) $(ASMOPTS) $(ADBG) +AFLAGS2 = -m$(AUSECPU) -jm -iINCLUDE: +AFLAGS = $(AFLAGS0) $(AFLAGS1) $(AFLAGS2) +ASMOPTSZ = $(AFLAGS) $(AUSEMEM) -dDYN_ALLOC # Zip asm flags +ASMOPTSL = $(AFLAGS) $(ALOWMEM) # Zip low-mem version asm flags + + +################## +# TARGET OBJECTS # +################## + + +# Zip objects +OBJZ1 = zip$(O) zipfile$(O) zipup$(O) fileio$(O) util$(O) globals$(O) +OBJZ2 = crc32$(O) crypt$(O) timezone$(O) ttyio$(O) +OBJZI = deflate$(O) trees$(O) +OBJZA = amiga$(O) amigazip$(O) stat$(O) filedate$(O) +OBJZ = $(OBJZ1) $(OBJZ2) $(OBJZI) $(OBJZA) + +# Shared utility objects for ZipNote, ZipCloak and ZipSplit +OBJU1 = globals$(O) +OBJUU = zipfile$(OU) fileio$(OU) timezone$(O) util$(OU) +OBJUA = amigazip$(OU) amiga$(O) stat$(O) filedate$(O) +OBJU = $(OBJU1) $(OBJUU) $(OBJUA) + +# ZipNote objects +OBJN1 = zipnote$(O) +OBJN = $(OBJN1) $(OBJU) + +# ZipCloak objects +OBJC1 = zipcloak$(O) +OBJCU = $(OBJU) crypt$(OU) +OBJCS = crc32$(OU) ttyio$(O) +OBJC = $(OBJC1) $(OBJCU) $(OBJCS) + +#ZipSplit objects +OBJS1 = zipsplit$(O) +OBJS = $(OBJS1) $(OBJU) + +# ZipLM objects +OBJL1 = zip$(OL) zipfile$(OL) zipup$(OL) fileio$(OL) util$(OL) globals$(OL) +OBJL2 = crc32$(OL) crypt$(OL) timezone$(OL) ttyio$(OL) +OBJLI = deflate$(OL) trees$(OL) +OBJLA = amiga$(OL) amigazip$(OL) stat$(OL) filedate$(OL) +OBJL = $(OBJL1) $(OBJL2) $(OBJLI) $(OBJLA) + +# Common header files +ZIP_H1 = zip.h ziperr.h tailor.h +ZIP_HA = amiga/osdep.h amiga/z-stat.h +ZIP_H = $(ZIP_H1) $(ZIP_HA) + +# Output targets +ZIPS = Zip ZipNote ZipCloak ZipSplit ZipLM + + +# Temp filenames for object lists to load using linker "WITH" command. +OBJLISTZ = zip_objlist.with # Zip object list +OBJLISTN = zipnote_objlist.with # ZipNote object list +OBJLISTC = zipcloak_objlist.with # ZipCloak object list +OBJLISTS = zipsplit_objlist.with # ZipSplit object list +OBJLISTL = ziplm_objlist.with # Zip low-mem object list + +####################################### +# DEFAULT TARGET AND PROCESSING RULES # +####################################### + +all: request flush $(ZIPS) + +# Zip transformation rules +# +.c$(O): + $(CC) WITH=$(CFILE) $(CUSEMEM) LISTFILE=$>$(LISTEXTZ) OBJNAME=$@ $*.c + +# Zip low-memory version transformation rules +# +.c$(OL): + $(CC) WITH=$(CFILE) $(CLOWMEM) LISTFILE=$>$(LISTEXTL) OBJNAME=$@ $*.c + +# Utilities (ZipNote, ZipCloak and ZipSplit) transformation rules +# +.c$(OU): + $(CC) WITH=$(CFILE) $(CUSEMEM) DEF=UTIL LISTFILE=$>$(LISTEXTU) OBJNAME=$@ $*.c + + +######################### +# Final output targets. # +######################### + + +zip: local_zip CommonFlags $(OBJZ) + @Echo "$(OBJZ)" > $(OBJLISTZ) + Type $(OBJLISTZ) + @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTZ) $(LIBFLAGS)" \ + "$(LDFLAGS2) $(LMAPZ)" >$(LWITHZ) + Type $(LWITHZ) + $(LD) TO Zip WITH $(LWITHZ) + +zipnote: local_zip CommonFlags $(OBJN) + @Echo "$(OBJN)" > $(OBJLISTN) + Type $(OBJLISTN) + @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTN) $(LIBFLAGS) " \ + "$(LDFLAGS2) $(LMAPN)" >$(LWITHN) + Type $(LWITHN) + $(LD) TO ZipNote WITH $(LWITHN) + +zipcloak: local_zip CommonFlags $(OBJC) + @Echo "$(OBJC)" > $(OBJLISTC) + Type $(OBJLISTC) + @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTC) $(LIBFLAGS) " \ + "$(LDFLAGS2) $(LMAPC)" >$(LWITHC) + Type $(LWITHC) + $(LD) TO ZipCloak WITH $(LWITHC) + +zipsplit: local_zip CommonFlags $(OBJS) + @Echo "$(OBJS)" > $(OBJLISTS) + Type $(OBJLISTS) + @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTS) $(LIBFLAGS) " \ + "$(LDFLAGS2) $(LMAPS)" >$(LWITHS) + Type $(LWITHS) + $(LD) TO ZipSplit WITH $(LWITHS) + +ziplm: local_zip CommonFlags $(OBJL) + @Echo "$(OBJL)" > $(OBJLISTL) + Type $(OBJLISTL) + @Echo "$(LDFLAGSS) $(LUTIL) WITH $(OBJLISTL) $(LIBFLAGS) " \ + "$(LDFLAGS2) $(LMAPL)" >$(LWITHL) + Type $(LWITHL) + $(LD) TO ZipLM WITH $(LWITHL) + + +clean: + -Delete >nil: $(OBJZ) quiet + -Delete >nil: $(OBJN) quiet + -Delete >nil: $(OBJC) quiet + -Delete >nil: $(OBJS) quiet + -Delete >nil: $(OBJL) quiet + -Delete >nil: $(OBJLISTZ) $(OBJLISTL) $(OBJLISTN) $(OBJLISTS) $(OBJLISTC) quiet + -Delete >nil: $(MAPFZ) $(MAPFN) $(MAPFC) $(MAPFS) $(MAPFL) quiet + -Delete >nil: \#?$(LISTEXTZ) \#?$(LISTEXTU) \#?$(LISTEXTL) quiet + -Delete >nil: $(CWITHOPT) $(CFILE) quiet + -Delete >nil: $(LWITHZ) $(LWITHN) $(LWITHC) $(LWITHS) $(LWITHL) quiet + -Delete >nil: env:VersionDate quiet + -Delete >nil: \#?.q.?? \#?.tmp \#?.cov quiet + +spotless: clean + -Delete >nil: $(ZIPS) quiet + + +################ +# DEPENDENCIES # +################ + +# To change between the assembler and C sources, you have to comment/uncomment +# the approprite lines. C sources are marked by #C-src and assembler sources +# #asm-src at the end. +# Zip dependencies: +# + +zip$(O): zip.c $(ZIP_H) revision.h crc32.h crypt.h ttyio.h +zipup$(O): zipup.c $(ZIP_H) revision.h crc32.h crypt.h amiga/zipup.h +zipfile$(O): zipfile.c $(ZIP_H) revision.h crc32.h +crypt$(O): crypt.c $(ZIP_H) crypt.h crc32.h ttyio.h +ttyio$(O): ttyio.c $(ZIP_H) crypt.h ttyio.h +deflate$(O): deflate.c $(ZIP_H) #C-src +trees$(O): trees.c $(ZIP_H) +fileio$(O): fileio.c $(ZIP_H) crc32.h +util$(O): util.c $(ZIP_H) +crc32$(O): crc32.c $(ZIP_H) crc32.h +globals$(O): globals.c $(ZIP_H) +timezone$(O): timezone.c $(ZIP_H) timezone.h +# Amiga specific objects +stat$(O): amiga/stat.c amiga/z-stat.h +filedate$(O): amiga/filedate.c crypt.h timezone.h +amiga$(O): amiga/amiga.c ziperr.h +amigazip$(O): amiga/amigazip.c $(ZIP_H) amiga/amiga.h env:Workbench +# Substitute assembly version of deflate.c: +#deflate$(O): amiga/deflate.a #asm-src +# $(ASM) $(ASMOPTSZ) -o$@ $*.a #asm-src + + +# Utility (ZipNote, ZipCloak, ZipSplit) dependencies: +# +zipnote$(O): zipnote.c $(ZIP_H) revision.h +zipcloak$(O): zipcloak.c $(ZIP_H) revision.h crc32.h crypt.h ttyio.h +zipsplit$(O): zipsplit.c $(ZIP_H) revision.h +zipfile$(OU): zipfile.c $(ZIP_H) revision.h crc32.h +fileio$(OU): fileio.c $(ZIP_H) crc32.h +util$(OU): util.c $(ZIP_H) +crc32$(OU): crc32.c $(ZIP_H) crc32.h +crypt$(OU): crypt.c $(ZIP_H) crypt.h crc32.h ttyio.h +# Amiga specific objects +amigazip$(OU): amiga/amigazip.c $(ZIP_H) amiga/amiga.h env:Workbench + +# ZipLM dependencies: +# +zip$(OL): zip.c $(ZIP_H) revision.h crc32.h crypt.h ttyio.h +zipup$(OL): zipup.c $(ZIP_H) revision.h crc32.h crypt.h amiga/zipup.h +zipfile$(OL): zipfile.c $(ZIP_H) revision.h crc32.h +crypt$(OL): crypt.c $(ZIP_H) crypt.h crc32.h ttyio.h +ttyio$(OL): ttyio.c $(ZIP_H) crypt.h ttyio.h +deflate$(OL): deflate.c $(ZIP_H) +trees$(OL): trees.c $(ZIP_H) +fileio$(OL): fileio.c $(ZIP_H) crc32.h +util$(OL): util.c $(ZIP_H) +crc32$(OL): crc32.c $(ZIP_H) +globals$(OL): globals.c $(ZIP_H) +timezone$(OL): timezone.c $(ZIP_H) timezone.h +# Amiga specific objects +stat$(OL): amiga/stat.c amiga/z-stat.h +filedate$(OL): amiga/filedate.c crypt.h timezone.h +amiga$(OL): amiga/amiga.c ziperr.h +# Substitute assembly version of deflate.c: +#deflate$(OL): amiga/deflate.a +# $(ASM) $(ASMOPTSL) -o$@ $*.a + + +######################## +# DEPENDECIES END HERE # +######################## + +# flush all libraries to provide more mem for compilation +flush: + @Avail flush >nil: + +# write common compiler flags to file and echo to user +CommonFlags: + @Echo "$(CFLAGS)" >$(CFILE) + @Type "$(CWITHOPT)" >>$(CFILE) + -Type $(CFILE) + + +# special rules for adding Amiga internal version number to amiga/amiga.c +amiga$(O): + rx > env:VersionDate "say '""'translate(date('E'),'.','/')'""'" + $(CC) WITH=$(CFILE) $(CUSEMEM) LISTFILE=$>$(LISTEXTZ) OBJNAME=$@ $*.c + -Delete env:VersionDate + +amiga$(OL): + rx > env:VersionDate "say '""'translate(date('E'),'.','/')'""'" + $(CC) WITH=$(CFILE) $(CLOWMEM) LISTFILE=$>$(LISTEXTL) OBJNAME=$@ $*.c + -Delete env:VersionDate + + +# needed in amiga/amigazip.c +# should be set in startup-sequence, but just in case: +# (only works with OS 2.0 and above) + +env\:WorkBench: + @Execute < < (Workbench_smk.tmp) + FailAt 21 + If not exists ENV:Workbench + Version >nil: + SetEnv Workbench $$Workbench + Endif + < + + +# Read environment variable LOCAL_ZIP and convert options to SAS format +# +# e.g.: to define FOO_ONE and FOO_TWO enter: +# +# SetEnv LOCAL_ZIP "-DFOO_ONE -DFOO_TWO" +# +# Put the statement into your startup-sequence or (for AmigaDOS 2.0 or higher +# only) make sure LOCAL_ZIP is stored in the ENVARC: directory +# ( Copy ENV:LOCAL_ZIP ENVARC: ) +# + +local_zip: + @Execute < < (Local_Zip_smk.tmp) + Failat 21 + If exists ENV:LOCAL_ZIP + Echo "Using environment variable LOCAL_ZIP !" + Copy >NIL: ENV:LOCAL_ZIP SASCOPTS + Else + Echo "You could use envvar ZIP_OPT to set your special compilation options." + Delete >nil: SASCOPTS quiet + Endif + ; Do not remove the lctosc command! If LOCAL_ZIP is unset, an + ; empty file is created which needed by CommonFlags ! + lctosc >$(CWITHOPT) + < + + + +# Echo request to the user +# +request: + @Echo "" + @Echo " This makefile is for use with SAS/C version 6.58." + @Echo " If you still have an older version, please upgrade!" + @Echo " Patches are available on the Aminet under biz/patch/sc\#?." + @Echo "" + @Echo " Just a simple request..." + @Echo " Please give me a mail that you compiled whether you encounter any errors" + @Echo " or not. I'd just like to know how many Amiga users actually make use of" + @Echo " this makefile." + @Echo " If you mail me, I'll put you on my mailing-list and notify you whenever" + @Echo " new versions of Info-Zip are released." + @Echo " Have a look at the makefile for changes like CPU type, UtilLib, etc." + @Echo " Feel free to mail comments, suggestions, etc." + @Echo " Enjoy Info-Zip !" + @Echo " Haidinger Walter, <walthaid@unix.ict.tuwien.ac.at>" + @Echo "" + + +# Echo help in case of an error +# +.ONERROR: + @Echo "" + @Echo "[sigh] An error running this makefile was detected." + @Echo "This message may also appear if you interrupted smake by pressing CTRL-C." + @Echo "Contact Info-Zip authors at Zip-Bugs@lists.wku.edu or me for help." + @Echo "Haidinger Walter, <walthaid@unix.ict.tuwien.ac.at>" + |