Merged changes from RELEASE-1 branchbefore_20040421_xprint_branch_landingXORG-CURRENT-CLOSEDXORG-CURRENT

2 files changed, 34 insertions, 36 deletions

diff --git a/README.config b/README.config
index 229049d..3d31137 100644
--- a/README.config
+++ b/README.config
@@ -6,9 +6,9 @@
 
                                   Abstract
 
-     This document describes how to configure XFree86 XKB from a user's
-     point a few. It converts basic configuration syntax and gives also
-     a few examples.
+     This document describes how to configure X11R6.7.0 XKB from a
+     user's point a few. It converts basic configuration syntax and
+     gives also a few examples.
 
 1.  Overview
 
@@ -39,16 +39,16 @@ The parameters are:
    o XkbOptions - extra xkb configuration options
 
 The proper rules file depends on your vendor. In reality, the commonest file
-of rules is xfree86. For each rules file there is a description file named
-<vendor-rules>.lst, for instance xfree86.lst which is located in xkb configu-
-ration subdirectory rules (for example /etc/X11/xkb/rules).
+of rules is xorg. For each rules file there is a description file named <ven-
+dor-rules>.lst, for instance xorg.lst which is located in xkb configuration
+subdirectory rules (for example /etc/X11/xkb/rules).
 
 2.1  Basic Configuration
 
 Let's say you want to configure a PC style America keyboard with 104 keys as
-described in xfree86.lst. It can be done by simply writing several lines from
-below to you XFree86 configuration file (often found as /etc/X11/XF86Config-4
-or /etc/X11/XF86Config):
+described in xorg.lst. It can be done by simply writing several lines from
+below to you xorg.conf configuration file (previously known as
+/etc/X11/XF86Config-4 or /etc/X11/XF86Config):
 
      Section "InputDevice"
          Identifier "Keyboard1"
@@ -67,18 +67,18 @@ named basic is loaded.
 Of course, this can be also done at runtime using utility setxkbmap.  Shell
 command loading the same keyboard mapping would look like:
 
-     setxkbmap -rules xfree86 -model pc104 -layout us -option ""
+     setxkbmap -rules xorg -model pc104 -layout us -option ""
 
 The configuration and the shell command would be very analogical for most
 other layouts (internationalized mappings).
 
 2.2  Advanced Configuration
 
-Since XFree86 4.3.x you can use multi-layouts xkb configuration.  What does
-it mean? Basically it allows to load up to four different keyboard layouts at
-a time. Each such layout would reside in its own group. The groups (unlike
-complete keyboard remapping) can be switched very fast from one to another by
-a combination of keys.
+You can use multi-layouts xkb configuration.  What does it mean? Basically it
+allows to load up to four different keyboard layouts at a time. Each such
+layout would reside in its own group. The groups (unlike complete keyboard
+remapping) can be switched very fast from one to another by a combination of
+keys.
 
 Let's say you want to configure your new Logitech cordless desktop keyboard,
 you intend to use three different layouts at the same time - us, czech and
@@ -99,7 +99,7 @@ Then the configuration snippet could look like this:
 Of course, this can be also done at runtime using utility setxkbmap.  Shell
 command loading the same keyboard mapping would look like:
 
-     setxkbmap -rules xfree86 -model logicordless -layout "us,cz,de" \
+     setxkbmap -rules xorg -model logicordless -layout "us,cz,de" \
               -option "grp:alt_shift_toggle"
 
 2.3  Even More Advanced Configuration
@@ -125,7 +125,7 @@ enhanced definition of the backslash key).
 
 Analogically, the loading runtime will change to:
 
-     setxkmap -rules xfree86 -model logicordless -layout "us,cz,de" \
+     setxkmap -rules xorg -model logicordless -layout "us,cz,de" \
               -variant ",bksl," -option "grp:alt_shift_toggle"
 
 2.4  Basic Global Options
@@ -139,9 +139,9 @@ components should be used to form the resulting keyboard mapping.  This
 method is rather "brute force". You precisely need to know the structure and
 the meaning of all of used configuration components.
 
-This method also exposes all xkb configuration details directly into XFree86
-configuration file which is a not very fortunate fact.  In rare occasions it
-may be needed, though. So how does it work?
+This method also exposes all xkb configuration details directly into
+xorg.conf configuration file which is a not very fortunate fact.  In rare
+occasions it may be needed, though. So how does it work?
 
 3.1  Basic Components
 
@@ -168,14 +168,14 @@ Look at the following example:
          Identifier "Keyboard0"
          Driver "Keyboard"
 
-         Option "XkbKeycodes" "xfree86"
+         Option "XkbKeycodes" "xorg"
          Option "XkbTypes"    "default"
          Option "XkbSymbols"  "en_US(pc104)+de+swapcaps"
          Option "XkbGeometry" "pc(pc104)"
          Option "XkbCompat"   "basic+pc+iso9995"
      EndSection
 
-This configuration sets the standard XFree86 default interpretation of key-
+This configuration sets the standard X server default interpretation of key-
 board keycodes, sets the default modificator types. The symbol table is com-
 posed of extended US keyboard layout in its variant for pc keyboards with 104
 keys plus all keys for german layout are redefined respectively. Also the
@@ -192,7 +192,6 @@ been obsoleted by previously described rules files which are far more flexi-
 ble and allow simpler and more intuitive syntax. It is preserved merely for
 compatibility reasons. Avoid using it if it is possible.
 
-     Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/XKB-Config.sgml,v 1.4 dawes Exp $
+     Generated from Id: XKB-Config.sgml,v 1.1.4.1.6.2 eich Exp $
 
 
-$XFree86: $
diff --git a/README.enhancing b/README.enhancing
index db78026..9993584 100644
--- a/README.enhancing
+++ b/README.enhancing
@@ -24,7 +24,7 @@ A useful source is also Ivan  Pascal's text about xkb configuration
 ment.
 
 Note that this document covers only enhancements which are to be made to
-XFree86 version 4.3.x and above.
+XFree86 version 4.3 and X11R6.7.0 and above.
 
 2.  The Basics
 
@@ -104,10 +104,10 @@ tricks.
 
 3.1  Levels And Groups
 
-Since XFree86 4.3.0 you can use multi-layout concept of xkb configuration.
-Though it is still in boundaries of xkb protocol and general ideas, the
-keymap designer must obey new rules when creating new maps. In exchange we
-get a more powerful and cleaner configuration system.
+Since XFree86 4.3.0 and X11R6.7.0 you can use multi-layout concept of xkb
+configuration.  Though it is still in boundaries of xkb protocol and general
+ideas, the keymap designer must obey new rules when creating new maps. In
+exchange we get a more powerful and cleaner configuration system.
 
 Remember that it is the application which must decide which symbol matches
 which keycode according to effective modifier state. The X server itself
@@ -423,7 +423,7 @@ this:
      ! model                   =   keycodes
        macintosh_old                     =   macintosh
        ...
-       *                       =   xfree86
+       *                       =   xorg
 
      ! model                        =   symbols
        hp                      =   +inet(%m)
@@ -446,10 +446,10 @@ Each rule defines what certain combination of values on the left side of
 equal sign ('=') results in. For example a (keyboard) model macintosh_old
 instructs xkb to take definitions of keycodes from file keycodes/macintosh
 while the rest of models (represented by a wild card '*') instructs it to
-take them from file keycodes/xfree86. The wild card represents all possible
-values on the left side which were not found in any of the previous rules.
-The more specialized (more complete) rules have higher precedence than gen-
-eral ones, i.e. the more general rules supply reasonable default values.
+take them from file keycodes/xorg. The wild card represents all possible val-
+ues on the left side which were not found in any of the previous rules.  The
+more specialized (more complete) rules have higher precedence than general
+ones, i.e. the more general rules supply reasonable default values.
 
 As you can see some lines contain substitution parameters - the parameters
 preceded by the percent sign ('%'). The first alphabetical character after
@@ -505,7 +505,6 @@ rules file described above the .lst file could look like:
 
 And that should be it. Enjoy creating your own xkb mapping.
 
-     Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/XKB-Enhancing.sgml,v 1.2 dawes Exp $
+     Generated from Id: XKB-Enhancing.sgml,v 1.1.10.2 eich Exp $
 
 
-$XFree86: $