diff options
| -rw-r--r-- | Makefile.am | 4 | ||||
| -rw-r--r-- | README.enhancing | 511 | ||||
| -rw-r--r-- | configure.in | 1 | ||||
| -rw-r--r-- | docs/.cvsignore | 2 | ||||
| -rw-r--r-- | docs/Makefile.am | 1 | ||||
| -rw-r--r-- | docs/README.config (renamed from README.config) | 0 | ||||
| -rw-r--r-- | xkbdesc.spec.in | 2 |
7 files changed, 7 insertions, 514 deletions
diff --git a/Makefile.am b/Makefile.am index b1dc96d..6be9056 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,6 +1,6 @@ -SUBDIRS = compat compiled geometry intl keycodes keymap m4 po rules semantics symbols types +SUBDIRS = compat compiled geometry intl keycodes keymap m4 po rules semantics symbols types docs -EXTRA_DIST= COPYING config.rpath mkinstalldirs config.rpath \ +EXTRA_DIST= COPYING README config.rpath mkinstalldirs config.rpath \ autogen.sh \ xkbdesc.spec \ xkbdesc.spec.in \ diff --git a/README.enhancing b/README.enhancing deleted file mode 100644 index db78026..0000000 --- a/README.enhancing +++ /dev/null @@ -1,511 +0,0 @@ - How to further enhance XKB configuration - - Kamil Toman, Ivan U. Pascal - - 25 November 2002 - - Abstract - - This guide is aimed to relieve one's labour to create a new (inter- - nationalized) keyboard layout. Unlike other documents this guide - accents the keymap developer's point of view. - -1. Overview - -The developer of a new layout should read the xkb protocol specification (The -X Keyboard Extension: Protocol Specification <URL:http://www.x- -docs.org/XKB/XKBproto.pdf>) at least to clarify for himself some xkb-specific -terms used in this document and elsewhere in xkb configuration. Also it shows -wise to understand how the X server and a client digest their keyboard inputs -(with and without xkb). - -A useful source is also Ivan Pascal's text about xkb configuration -<URL:http://www.tsu.ru/~pascal/en/xkb> often referenced throughout this docu- -ment. - -Note that this document covers only enhancements which are to be made to -XFree86 version 4.3.x and above. - -2. The Basics - -At the startup (or at later at user's command) X server starts its xkb key- -board module extension and reads data from a compiled configuration file. - -This compiled configuration file is prepared by the program xkbcomp which -behaves altogether as an ordinary compiler (see man xkbcomp). Its input are -human readable xkb configuration files which are verified and then composed -into a useful xkb configuration. Users don't need to mess with xkbcomp them- -selves, for them it is invisible. Usually, it is started upon X server -startup. - -As you probably already know, the xkb configuration consists of five main -modules: - - Keycodes - Tables that defines translation from keyboard scan codes into - reasonable symbolic names, maximum, minimum legal keycodes, sym- - bolic aliases and description of physically present LED-indica- - tors. The primary sence of this component is to allow definitions - of maps of symbols (see below) to be independent of physical key- - board scancodes. There are two main naming conventions for sym- - bolic names (always four bytes long): - - o names which express some traditional meaning like <SPCE> - (stands for space bar) or - - o names which express some relative positioning on a key- - board, for example <AE01> (an exclamation mark on US key- - boards), on the right there are keys <AE02>, <AE03> etc. - - Types - Types describe how the produced key is changed by active modi- - fiers (like Shift, Control, Alt, ...). There are several prede- - fined types which cover most of used combinations. - - Compat - Compatibility component defines internal behaviour of modifiers. - Using compat component you can assign various actions (elabo- - rately described in xkb specification) to key events. This is - also the place where LED-indicators behaviour is defined. - - Symbols - For i18n purposes, this is the most important table. It defines - what values (=symbols) are assigned to what keycodes (represented - by their symbolic name, see above). There may be defined more - than one value for each key and then it depends on a key type and - on modifiers state (respective compat component) which value will - be the resulting one. - - Geometry - Geometry files aren't used by xkb itself but they may be used by - some external programs to depict a keyboard image. - -All these components have the files located in xkb configuration tree in sub- -directories with the same names (usually in /usr/lib/X11/xkb). - -3. Enhancing XKB Configuration - -Most of xkb enhancements concerns a need to define new output symbols for the -some input key events. In other words, a need to define a new symbol map (for -a new language, standard or just to feel more comfortable when typing text). - -What do you need to do? Generally, you have to define following things: - - o the map of symbols itself - - o the rules to allow users to select the new mapping - - o the description of the new layout - -First of all, it is good to go through existing layouts and to examine them -if there is something you could easily adjust to fit your needs. Even if -there is nothing similar you may get some ideas about basic concepts and used -tricks. - -3.1 Levels And Groups - -Since XFree86 4.3.0 you can use multi-layout concept of xkb configuration. -Though it is still in boundaries of xkb protocol and general ideas, the -keymap designer must obey new rules when creating new maps. In exchange we -get a more powerful and cleaner configuration system. - -Remember that it is the application which must decide which symbol matches -which keycode according to effective modifier state. The X server itself -sends only an input event message to. Of course, usually the general inter- -pretation is processed by Xlib, Xaw, Motif, Qt, Gtk and similar libraries. -The X server only supplies its mapping table (usually upon an application -startup). - -You can think of the X server's symbol table as of a irregular table where -each keycode has its row and where each combination of modifiers determines -exactly one column. The resulting cell then gives the proper symbolic value. -Not all keycodes need to bind different values for different combination of -modifiers. <ENTER> key, for instance, usually doesn't depend on any modi- -fiers so it its row has only one column defined. - -Note that in XKB there is no prior assumption that certain modifiers are -bound to certain columns. By editing proper files (see keytypes (section 4.2, -page 1)) this mapping can be changed as well. - -Unlike the original X protocol the XKB approach is far more flexible. It is -comfortable to add one additional XKB term - group. You can think of a group -as of a vector of columns per each keycode (naturally the dimension of this -vector may differ for different keycodes). What is it good for? The group is -not very useful unless you intend to use more than one logically different -set of symbols (like more than one alphabet) defined in a single mapping ta- -ble. But then, the group has a natural meaning - each symbol set has its own -group and changing it means selecting a different one. XKB approach allows -up to four different groups. The columns inside each group are called (shift) -levels. The X server knows the current group and reports it together with -modifier set and with a keycode in key events. - -To sum it up: - - o for each keycode XKB keyboard map contains up to four one-dimensional - tables - groups (logically different symbol sets) - - o for each group of a keycode XKB keyboard map contains some columns - - shift levels (values reached by combinations of Shift, Ctrl, Alt, ... - modifiers) - - o different keycodes can have different number of groups - - o different groups of one keycode can have different number of shift lev- - els - - o the current group number is tracked by X server - -It is clear that if you sanely define levels, groups and sanely bind modi- -fiers and associated actions you can have simultaneously loaded up to four -different symbol sets where each of them would reside in its own group. - -The multi-layout concept provides a facility to manipulate xkb groups and -symbol definitions in a way that allows almost arbitrary composition of pre- -defined symbol tables. To keep it fully functional you have to: - - o define all symbols only in the first group - - o (re)define any modifiers with extra care to avoid strange (anisometric) - behaviour - -4. Defining New Layouts - -See Some Words About XKB internals <URL:http://www.tsu.ru/~pas- -cal/en/xkb/internals.html> for explanation of used xkb terms and problems -addressed by XKB extension. - -See Common notes about XKB configuration files language -<URL:http://www.tsu.ru/~pascal/en/xkb/gram-common.html> for more precise -explanation of syntax of xkb configuration files. - -4.1 Predefined XKB Symbol Sets - -If you are about to define some European symbol map extension, you might want -to use on of four predefined latin alphabet layouts. - -Okay, let's assume you want extend an existing keymap and you want to over- -ride a few keys. Let's take a simple U.K. keyboard as an example (defined in -pc/gb): - - partial default alphanumeric_keys - xkb_symbols "basic" { - include "pc/latin" - - name[Group1]="Great Britain"; - - key <AE02> { [ 2, quotedbl, twosuperior, oneeighth ] }; - key <AE03> { [ 3, sterling, threesuperior, sterling ] }; - key <AC11> { [apostrophe, at, dead_circumflex, dead_caron] }; - key <TLDE> { [ grave, notsign, bar, bar ] }; - key <BKSL> { [numbersign, asciitilde, dead_grave, dead_breve ] }; - key <RALT> { type[Group1]="TWO_LEVEL", - [ ISO_Level3_Shift, Multi_key ] }; - - modifier_map Mod5 { <RALT> }; - }; - -It defines a new layout in basic variant as an extension of common latin -alphabet layout. The layout (symbol set) name is set to "Great Britain". -Then there are redefinitions of a few keycodes and a modifiers binding. As -you can see the number of shift levels is the same for <AE02>, <AE03>, -<AC11>, <TLDE> and <BKSL> keys but it differs from number of shift levels of -<RALT>. - -Note that the <RALT> key itself is a binding key for Mod5 and that it serves -like a shift modifier for LevelThree, together with Shift as a multi-key. It -is a good habit to respect this rule in a new similar layout. - -Okay, you could now define more variants of your new layout besides basic -simply by including (augmenting/overriding/...) the basic definition and -altering what may be needed. - -4.2 Key Types - -The differences in the number of columns (shift levels) are caused by a dif- -ferent types of keys (see the types definition in section basics). Most key- -codes have implicitly set the keytype in the included "pc/latin" file to -"FOUR_LEVEL_ALPHABETIC". The only exception is <RALT> keycode which is -explicitly set "TWO_LEVEL" keytype. - -All those names refer to pre-defined shift level schemes. Usually you can -choose a suitable shift level scheme from default types scheme list in proper -xkb component's subdirectory. - -The most used schemes are: - - ONE_LEVEL - The key does not depend on any modifiers. The symbol from first - level is always chosen. - - TWO_LEVEL - The key uses a modifier Shift and may have two possible values. - The second level may be chosen by Shift modifier. If Lock modi- - fier (usually Caps-lock) applies the symbol is further processed - using system-specific capitalization rules. If both Shift+Lock - modifier apply the symbol from the second level is taken and cap- - italization rules are applied (and usually have no effect). - - ALPHABETIC - The key uses modifiers Shift and Lock. It may have two possible - values. The second level may be chosen by Shift modifier. When - Lock modifier applies, the symbol from the first level is taken - and further processed using system-specific capitalization rules. - If both Shift+Lock modifier apply the symbol from the first level - is taken and no capitalization rules applied. This is often - called shift-cancels-caps behaviour. - - THREE_LEVEL - Is the same as TWO_LEVEL but it considers an extra modifier - - LevelThree which can be used to gain the symbol value from the - third level. If both Shift+LevelThree modifiers apply the value - from the third level is also taken. As in TWO_LEVEL, the Lock - modifier doesn't influence the resulting level. Only Shift and - LevelThree are taken into that consideration. If the Lock modi- - fier is active capitalization rules are applied on the resulting - symbol. - - FOUR_LEVEL - Is the same as THREE_LEVEL but unlike LEVEL_THREE if both - Shift+LevelThree modifiers apply the symbol is taken from the - fourth level. - - FOUR_LEVEL_ALPHABETIC - Is similar to FOUR_LEVEL but also defines shift-cancels-caps - behaviour as in ALPHABETIC. If Lock+LevelThree apply the symbol - from the third level is taken and the capitalization rules are - applied. If Lock+Shift+LevelThree apply the symbol from the - third level is taken and no capitalization rules are applied. - - KEYPAD - As the name suggest this scheme is primarily used for numeric - keypads. The scheme considers two modifiers - Shift and NumLock. - If none of modifiers applies the symbol from the first level is - taken. If either Shift or NumLock modifiers apply the symbol from - the second level is taken. If both Shift+NumLock modifiers apply - the symbol from the first level is taken. Again, shift-cancels- - caps variant. - - FOUR_LEVEL_KEYPAD - Is similar to KEYPAD scheme but considers also LevelThree modi- - fier. If LevelThree modifier applies the symbol from the third - level is taken. If Shift+LevelThree or NumLock+LevelThree apply - the symbol from the fourth level is taken. If all Shift+Num- - Lock+LevelThree modifiers apply the symbol from the third level - is taken. This also, shift-cancels-caps variant. - -Besides that, there are several schemes for special purposes: - - PC_BREAK - It is similar to TWO_LEVEL scheme but it considers the Control - modifier rather than Shift. That means, the symbol from the sec- - ond level is chosen by Control rather than by Shift. - - PC_SYSRQ - It is similar to TWO_LEVEL scheme but it considers the Alt modi- - fier rather than Shift. That means, the symbol from the second - level is chosen by Alt rather than by Shift. - - CTRL+ALT - The key uses modifiers Alt and Control. It may have two possible - values. If only one modifier (Alt or Control) applies the symbol - from the first level is chosen. Only if both Alt+Control modi- - fiers apply the symbol from the second level is chosen. - - SHIFT+ALT - The key uses modifiers Shift and Alt. It may have two possible - values. If only one modifier (Alt or Shift) applies the symbol - from the first level is chosen. Only if both Alt+Shift modifiers - apply the symbol from the second level is chosen. - -If needed, special caps schemes may be used. They redefine the standard -behaviour of all *ALPHABETIC types. The layouts (maps of symbols) with keys -defined in respective types then automatically change their behaviour accord- -ingly. Possible redefinitions are: - - o internal - - o internal_nocancel - - o shift - - o shift_nocancel - -None of these schemes should be used directly. They are defined merely for -'caps:' xkb options (used to globally change the layouts behaviour). - -Don't alter any of existing key types. If you need a different behaviour cre- -ate a new one. - -4.2.1 More On Definitions Of Types - -When the XKB software deals with a separate type description it gets a com- -plete list of modifiers that should be taken into account from the 'modi- -fiers=<list of modifiers>' list and expects that a set of 'map[<combination -of modifiers>]=<list of modifiers>' instructions that contain the mapping for -each combination of modifiers mentioned in that list. Modifiers that are not -explicitly listed are NOT taken into account when the resulting shift level -is computed. If some combination is omitted the program (subroutine) should -choose the first level for this combination (a quite reasonable behavior). - -Lets consider an example with two modifiers ModOne and ModTwo: - - type "..." { - modifiers = ModOne+ModTwo; - map[None] = Level1; - map[ModOne] = Level2; - }; - -In this case the map statements for ModTwo only and ModOne+ModTwo are omit- -ted. It means that if the ModTwo is active the subroutine can't found -explicit mapping for such combination an will use the default level i.e. -Level1. - -But in the case the type described as: - - type "..." { - modifiers = ModOne; - map[None] = Level1; - map[ModOne] = Level2; - }; - -the ModTwo will not be taken into account and the resulting level depends on -the ModOne state only. That means, ModTwo alone produces the Level1 but the -combination ModOne+ModTwo produces the Level2 as well as ModOne alone. - -What does it mean if the second modifier is the Lock? It means that in the -first case (the Lock itself is included in the list of modifiers but combina- -tions with this modifier aren't mentioned in the map statements) the internal -capitalization rules will be applied to the symbol from the first level. But -in the second case the capitalization will be applied to the symbol chosen -accordingly to he first modifier - and this can be the symbol from the first -as well as from the second level. - -Usually, all modifiers introduced in 'modifiers=<list of modifiers>' list are -used for shift level calculation and then discarded. Sometimes this is not -desirable. If you want to use a modifier for shift level calculation but you -don't want to discard it, you may list in 'preserve[<combination of modi- -fiers>]=<list of modifiers>'. That means, for a given combination all listed -modifiers will be preserved. If the Lock modifier is preserved then the -resulting symbol is passed to internal capitalization routine regardless -whether it has been used for a shift level calculation or not. - -Any key type description can use both real and virtual modifiers. Since real -modifiers always have standard names it is not necessary to explicitly -declare them. Virtual modifiers can have arbitrary names and can be declared -(prior using them) directly in key type definition: - - virtual_modifiers <comma-separated list of modifiers> ; - -as seen in for example basic, pc or mousekeys key type definitions. - -4.3 Rules - -Once you are finished with your symbol map you need to add it to rules file. -The rules file describes how all the five basic keycodes, types, compat, sym- -bols and geometry components should be composed to give a sensible resulting -xkb configuration. - -The main advantage of rules over formerly used keymaps is a possibility to -simply parameterize (once) fixed patterns of configurations and thus to ele- -gantly allow substitutions of various local configurations into predefined -templates. - -A pattern in a rules file (often located in /usr/lib/X11/xkb/rules) can be -parameterized with four other arguments: Model, Layout, Variant and Options. -For most cases parameters model and layout should be sufficient for choosing -a functional keyboard mapping. - -The rules file itself is composed of pattern lines and lines with rules. The -pattern line starts with an exclamation mark ('!') and describes how will the -xkb interpret the following lines (rules). A sample rules file looks like -this: - - ! model = keycodes - macintosh_old = macintosh - ... - * = xfree86 - - ! model = symbols - hp = +inet(%m) - microsoftpro = +inet(%m) - geniuscomfy = +inet(%m) - - ! model layout[1] = symbols - macintosh us = macintosh/us%(v[1]) - * * = pc/pc(%m)+pc/%l[1]%(v[1]) - - ! model layout[2] = symbols - macintosh us = +macintosh/us[2]%(v[2]):2 - * * = +pc/%l[2]%(v[2]):2 - - ! option = types - caps:internal = +caps(internal) - caps:internal_nocancel = +caps(internal_nocancel) - -Each rule defines what certain combination of values on the left side of -equal sign ('=') results in. For example a (keyboard) model macintosh_old -instructs xkb to take definitions of keycodes from file keycodes/macintosh -while the rest of models (represented by a wild card '*') instructs it to -take them from file keycodes/xfree86. The wild card represents all possible -values on the left side which were not found in any of the previous rules. -The more specialized (more complete) rules have higher precedence than gen- -eral ones, i.e. the more general rules supply reasonable default values. - -As you can see some lines contain substitution parameters - the parameters -preceded by the percent sign ('%'). The first alphabetical character after -the percent sign expands to the value which has been found on the left side. -For example +%l%(v) expands into +cz(bksl) if the respective values on the -left side were cz layout in its bksl variant. More, if the layout resp. vari- -ant parameter is followed by a pair of brackets ('[', ']') it means that xkb -should place the layout resp. variant into specified xkb group. If the brack- -ets are omitted the first group is the default value. - -So the second block of rules enhances symbol definitions for some particular -keyboard models with extra keys (for internet, multimedia, ...) . Other mod- -els are left intact. Similarly, the last block overrides some key type defi- -nitions, so the common global behaviour ''shift cancels caps'' or ''shift -doesn't cancel caps'' can be selected. The rest of rules produces special -symbols for each variant us layout of macintosh keyboard and standard pc sym- -bols in appropriate variants as a default. - -4.4 Descriptive Files of Rules - -Now you just need to add a detailed description to <rules>.xml description -file so the other users (and external programs which often parse this file) -know what is your work about. - -4.4.1 Old Descriptive Files - -The formerly used descriptive files were named <rules>.lst Its structure is -very simple and quite self descriptive but such simplicity had also some cav- -ities, for example there was no way how to describe local variants of layouts -and there were problems with the localization of descriptions. To preserve -compatibility with some older programs, new XML descriptive files can be con- -verted to old format '.lst'. - -For each parameter of rules file should be described its meaning. For the -rules file described above the .lst file could look like: - - ! model - pc104 Generic 104-key PC - microsoft Microsoft Natural - pc98 PC-98xx Series - macintosh Original Macintosh - ... - - ! layout - us U.S. English - cz Czech - de German - ... - - ! option - caps:internal uses internal capitalization. Shift cancels Caps - caps:internal_nocancel uses internal capitalization. Shift doesn't cancel Caps - -And that should be it. Enjoy creating your own xkb mapping. - - Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/XKB-Enhancing.sgml,v 1.2 dawes Exp $ - - -$XFree86: $ diff --git a/configure.in b/configure.in index 83539ab..4e4c3b7 100644 --- a/configure.in +++ b/configure.in @@ -67,5 +67,6 @@ symbols/sun_vndr/Makefile symbols/xfree68_vndr/Makefile types/Makefile xkbdesc.spec +docs/Makefile ]) diff --git a/docs/.cvsignore b/docs/.cvsignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/docs/.cvsignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/docs/Makefile.am b/docs/Makefile.am new file mode 100644 index 0000000..931b8c8 --- /dev/null +++ b/docs/Makefile.am @@ -0,0 +1 @@ +EXTRA_DIST= README.config README.enhancing diff --git a/README.config b/docs/README.config index 229049d..229049d 100644 --- a/README.config +++ b/docs/README.config diff --git a/xkbdesc.spec.in b/xkbdesc.spec.in index b841f6f..9716e57 100644 --- a/xkbdesc.spec.in +++ b/xkbdesc.spec.in @@ -41,5 +41,5 @@ rm -rf $RPM_BUILD_DIR/%{name}-%{version} %files %defattr(-, root, root) -%doc AUTHORS ChangeLog NEWS README COPYING +%doc AUTHORS ChangeLog NEWS README COPYING docs/README.config docs/README.enhancing %{_prefix}/X11R6/lib/X11/xkb/* |