Doc addition and 506 559 bugs fixed

(Old svn revision: 2191)

26 files changed, 3104 insertions, 910 deletions

diff --git a/Makefile.am b/Makefile.am
index a7fd429..16e6312 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -4,6 +4,7 @@ EXTRA_DIST = xfce4-appfinder.spec TODO ChangeLog
 
 SUBDIRS =						\
 	po						\
+	doc						\
 	src
 
 distclean-local:
diff --git a/Makefile.in b/Makefile.in
index c2c5a4b..5208fe4 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.9.2 from Makefile.am.
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -33,7 +33,6 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-build_triplet = @build@
 host_triplet = @host@
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
@@ -165,8 +164,6 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -199,6 +196,7 @@ target_alias = @target_alias@
 EXTRA_DIST = xfce4-appfinder.spec TODO ChangeLog 
 SUBDIRS = \
 	po						\
+	doc						\
 	src
 
 ACLOCAL_AMFLAGS = -I m4
@@ -419,17 +417,15 @@ distdir: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 	    (cd $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -440,15 +436,15 @@ distdir: $(DISTFILES)
 	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
 dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
 
 dist-shar: distdir
@@ -461,7 +457,7 @@ dist-zip: distdir
 	$(am__remove_distdir)
 
 dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
@@ -470,11 +466,11 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
 	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
 	*.shar.gz*) \
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
@@ -555,7 +551,7 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
diff --git a/aclocal.m4 b/aclocal.m4
index 3f4dfe7..26d2a97 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.9.2 -*- Autoconf -*-
+# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
 # Free Software Foundation, Inc.
@@ -220,6 +220,7 @@ test -z "$pic_mode" && pic_mode=default
 tagname=
 AC_LIBTOOL_LANG_C_CONFIG
 _LT_AC_TAGCONFIG
+_LT_AC_SHARED_EXT
 ])# AC_LIBTOOL_SETUP
 
 
@@ -523,6 +524,20 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   rm -rf conftest*
   ;;
 
+*-*-linux*)
+  # Test if the compiler is 64bit
+  echo 'int i;' > conftest.$ac_ext
+  lt_cv_cc_64bit_output=no
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *"ELF 64"*)
+      lt_cv_cc_64bit_output=yes
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+  
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
@@ -632,7 +647,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
-  teststring="ABCD"
+  testring="ABCD"
 
   case $build_os in
   msdosdjgpp*)
@@ -671,16 +686,16 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
+	       = "XX$testring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$testring" : ".*" 2>&1` &&
 	    lt_cv_sys_max_cmd_len=$new_result &&
 	    test $i != 17 # 1/2 MB should be enough
     do
       i=`expr $i + 1`
-      teststring=$teststring$teststring
+      testring=$testring$testring
     done
-    teststring=
+    testring=
     # Add a significant safety factor because C++ compilers can tack on massive
     # amounts of additional arguments before passing them to the linker.
     # It appears as though 1/2 is a usable value.
@@ -1076,7 +1091,7 @@ AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -1189,7 +1204,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -1236,6 +1251,30 @@ cygwin* | mingw* | pw32*)
     esac
     ;;
 
+  linux*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        $archive_expsym_cmds="$archive_cmds"
+      fi
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -1254,7 +1293,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -1337,7 +1376,7 @@ hpux9* | hpux10* | hpux11*)
   need_version=no
   case "$host_cpu" in
   ia64*)
-    shrext_cmds='.so'
+    shrext='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -1352,7 +1391,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext_cmds='.sl'
+     shrext='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -1363,7 +1402,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext_cmds='.sl'
+    shrext='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -1432,36 +1471,46 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
+  fi
+
+  case $host_cpu:$lt_cv_cc_64bit_output in
+  powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+    sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+    sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+    ;;
+  esac
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+
+  # Find out which ABI we are using (multilib Linux x86_64 hack).
   libsuff=
   case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
+  x86_64*)
     echo '[#]line __oline__ "configure"' > conftest.$ac_ext
     if AC_TRY_EVAL(ac_compile); then
       case `/usr/bin/file conftest.$ac_objext` in
       *64-bit*)
         libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
         ;;
       esac
     fi
     rm -rf conftest*
     ;;
+  *)
+    ;;
   esac
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
+  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
   ;;
 
 knetbsd*-gnu)
@@ -1534,7 +1583,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -1731,6 +1780,24 @@ if test -f "$ltmain" && test -n "$tagnames"; then
 fi
 ])# _LT_AC_TAGCONFIG
 
+# _LT_AC_SHARED_EXT
+# ----------------
+AC_DEFUN([_LT_AC_SHARED_EXT],[
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+  if test -z "`grep -e 'shared_ext.*shrext' $ofile`"; then
+    # Make sure $shared_ext gets set to $shrext
+    if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
+      mv "${ofile}T" "$ofile"
+      chmod +x "$ofile"
+    else
+      rm -f "${ofile}T"
+      AC_MSG_ERROR([unable to update shared_ext.])
+    fi
+  fi
+])# _LT_AC_SHARED_EXT
+
 
 # AC_LIBTOOL_DLOPEN
 # -----------------
@@ -2125,14 +2192,14 @@ bsdi4*)
   ;;
 
 cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
+  # win32_libid is a shell function defined in ltmain.sh
   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
+  lt_cv_file_magic_cmd='win32_libid'
   ;;
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  # win32_libid shell function, so use a weaker test based on 'objdump'.
   lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
@@ -2552,7 +2619,7 @@ aix3*)
   fi
   ;;
 
-aix4* | aix5*)
+aix4*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -3000,7 +3067,7 @@ case $host_os in
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -3703,7 +3770,7 @@ aix3*)
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4* | aix5*)
+aix4*)
   test "$enable_shared" = yes && enable_static=no
   ;;
 esac
@@ -4058,7 +4125,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+shrext='$shrext'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -5166,7 +5233,7 @@ EOF
       ;;
 
   linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
         tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
       supports_anon_versioning=no
@@ -5366,7 +5433,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
+      shrext=".dll"
       # FIXME: Setting linknames here is a bad hack.
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
@@ -5958,14 +6025,14 @@ AC_MSG_RESULT([$SED])
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION so it can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.2])])
+	 [AM_AUTOMAKE_VERSION([1.8.5])])
 
 # AM_AUX_DIR_EXPAND
 
@@ -6033,7 +6100,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
 
 # AM_CONDITIONAL                                              -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -6070,8 +6137,8 @@ else
 fi
 AC_CONFIG_COMMANDS_PRE(
 [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
+  AC_MSG_ERROR([conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.])
 fi])])
 
 # serial 7						-*- Autoconf -*-
@@ -6244,8 +6311,7 @@ AC_SUBST([AMDEPBACKSLASH])
 
 # Generate code to set up dependency tracking.   -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
-#   Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -6281,21 +6347,27 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
   else
     continue
   fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
+  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
   DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
   test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
   # When using ansi2knr, U may be empty or an underscore; expand it
   U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
@@ -6350,7 +6422,7 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 # This macro actually does too much some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
 # Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
@@ -6426,6 +6498,7 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
 AM_PROG_INSTALL_SH
 AM_PROG_INSTALL_STRIP
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
@@ -6434,9 +6507,7 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
+
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
                   [_AM_DEPENDENCIES(CC)],
@@ -6719,21 +6790,13 @@ fi
 # this.)
 AC_DEFUN([AM_PROG_MKDIR_P],
 [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
+  # Keeping the `.' argument allows $(mkdir_p) to be used without
+  # argument.  Indeed, we sometimes output rules like
   #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
+  # where $(somedir) is conditionally defined.
+  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
+  # expensive solution, as it forces Make to start a sub-shell.)
+  mkdir_p='mkdir -p -- .'
 else
   # On NextStep and OpenStep, the `mkdir' command does not
   # recognize any option.  It will interpret all options as
@@ -6899,114 +6962,6 @@ fi
 INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
-
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
 m4_include([m4/debug.m4])
 m4_include([m4/depends.m4])
 m4_include([m4/glib-gettext.m4])
diff --git a/compile b/compile
index 80b645b..a81e000 100755
--- a/compile
+++ b/compile
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Wrapper for compilers which do not understand `-c -o'.
 
-scriptversion=2004-09-10.20
+scriptversion=2003-11-09.00
 
-# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -55,41 +55,37 @@ EOF
     ;;
 esac
 
+
+prog=$1
+shift
+
 ofile=
 cfile=
-eat=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as `compile cc -o foo foo.c'.
-	# So we strip `-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
+args=
+while test $# -gt 0; do
+  case "$1" in
+    -o)
+      # configure might choose to run compile as `compile cc -o foo foo.c'.
+      # So we do something ugly here.
+      ofile=$2
+      shift
+      case "$ofile" in
+	*.o | *.obj)
+	  ;;
+	*)
+	  args="$args -o $ofile"
+	  ofile=
+	  ;;
+      esac
+       ;;
+    *.c)
+      cfile=$1
+      args="$args $1"
+      ;;
+    *)
+      args="$args $1"
+      ;;
+  esac
   shift
 done
 
@@ -99,36 +95,36 @@ if test -z "$ofile" || test -z "$cfile"; then
   # normal compilation that the losing compiler can handle.  If no
   # `.c' file was seen then we are probably linking.  That is also
   # ok.
-  exec "$@"
+  exec "$prog" $args
 fi
 
 # Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
 
 # Create the lock directory.
 # Note: use `[/.-]' here to ensure that we don't use the same name
 # that we are using for the .o file.  Also, base the name on the expected
 # object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
 while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
+  if mkdir $lockdir > /dev/null 2>&1; then
     break
   fi
   sleep 1
 done
 # FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
+trap "rmdir $lockdir; exit 1" 1 2 15
 
 # Run the compile.
-"$@"
-ret=$?
+"$prog" $args
+status=$?
 
 if test -f "$cofile"; then
   mv "$cofile" "$ofile"
 fi
 
-rmdir "$lockdir"
-exit $ret
+rmdir $lockdir
+exit $status
 
 # Local Variables:
 # mode: shell-script
diff --git a/config.guess b/config.guess
index 7d0185e..97c2664 100755
--- a/config.guess
+++ b/config.guess
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
 
-timestamp='2004-09-07'
+timestamp='2004-03-12'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -53,7 +53,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -136,6 +136,19 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+# Detect uclibc systems.
+
+LIBC="gnu"
+if [ -f /usr/include/bits/uClibc_config.h ]
+then
+	LIBC=uclibc
+	if [[ -n `grep "#define __UCLIBC_CONFIG_VERSION__" /usr/include/bits/uClibc_config.h` ]]
+	then
+		UCLIBC_SUBVER=`sed -n "/#define __UCLIBC_CONFIG_VERSION__ /s///p" /usr/include/bits/uClibc_config.h`
+		LIBC=$LIBC$UCLIBC_SUBVER
+	fi
+fi
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -203,15 +216,15 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     amiga:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     cats:OpenBSD:*:*)
 	echo arm-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     hp300:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
-    luna88k:OpenBSD:*:*)
-    	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     mac68k:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -227,12 +240,21 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     mvmeppc:OpenBSD:*:*)
 	echo powerpc-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    pegasos:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     sgi:OpenBSD:*:*)
-	echo mips64-unknown-openbsd${UNAME_RELEASE}
+	echo mipseb-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     sun3:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     *:OpenBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -298,6 +320,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
 	exit 0 ;;
+    Alpha*:OpenVMS:*:*)
+	echo alpha-hp-vms
+	exit 0 ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -752,7 +777,7 @@ EOF
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
@@ -775,7 +800,21 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit 0 ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	# Determine whether the default compiler uses glibc.
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#if __GLIBC__ >= 2
+	LIBC=gnu
+	#else
+	LIBC=
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	# GNU/KFreeBSD systems have a "k" prefix to indicate we are using
+	# FreeBSD's kernel, but not the complete OS.
+	case ${LIBC} in gnu) kernel_only='k' ;; esac
+	echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
 	exit 0 ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -819,25 +858,19 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit 0 ;;
     arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit 0 ;;
-    crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
-	exit 0 ;;
-    frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+	echo cris-axis-linux-${LIBC}
 	exit 0 ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
@@ -856,7 +889,7 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-${LIBC}" && exit 0
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -875,13 +908,13 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-${LIBC}" && exit 0
 	;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
 	exit 0 ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit 0 ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -894,34 +927,34 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
         esac
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit 0 ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit 0 ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit 0 ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit 0 ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo x86_64-unknown-linux-${LIBC}
 	exit 0 ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
@@ -936,20 +969,21 @@ EOF
 				    p'`
         case "$ld_supported_targets" in
 	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
 		;;
 	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout"
 		exit 0 ;;
 	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff"
 		exit 0 ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld"
 		exit 0 ;;
 	esac
+	if [ $LIBC != "gnu" -o $LIBC != "gnulibc1" ];then echo "$TENTATIVE" && exit 0; fi
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -1076,9 +1110,9 @@ EOF
     M680?0:D-NIX:5.3:*)
 	echo m68k-diab-dnix
 	exit 0 ;;
-    M68*:*:R3V[5678]*:*)
+    M68*:*:R3V[567]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1176,10 +1210,9 @@ EOF
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
 	exit 0 ;;
     *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
+	case `uname -p` in
 	    *86) UNAME_PROCESSOR=i686 ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
+	    powerpc) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit 0 ;;
@@ -1241,13 +1274,6 @@ EOF
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit 0 ;;
-    *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms && exit 0 ;;
-	    I*) echo ia64-dec-vms && exit 0 ;;
-	    V*) echo vax-dec-vms && exit 0 ;;
-	esac
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/config.sub b/config.sub
index edb6b66..ba33103 100755
--- a/config.sub
+++ b/config.sub
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
 
-timestamp='2004-08-29'
+timestamp='2004-03-12'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -70,7 +70,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -145,7 +145,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
+	-apple | -axis)
 		os=
 		basic_machine=$1
 		;;
@@ -300,7 +300,7 @@ case $basic_machine in
 	| avr-* \
 	| bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | craynv-* | cydra-* \
+	| clipper-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
@@ -326,9 +326,8 @@ case $basic_machine in
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
 	| msp430-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
+	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
@@ -446,10 +445,6 @@ case $basic_machine in
 		basic_machine=j90-cray
 		os=-unicos
 		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
 	cr16c)
 		basic_machine=cr16c-unknown
 		os=-elf
@@ -457,9 +452,6 @@ case $basic_machine in
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
@@ -667,6 +659,10 @@ case $basic_machine in
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
+	mmix*)
+		basic_machine=mmix-knuth
+		os=-mmixware
+		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -747,6 +743,10 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
+	nv1)
+		basic_machine=nv1-cray
+		os=-unicosmp
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -1059,9 +1059,6 @@ case $basic_machine in
 	romp)
 		basic_machine=romp-ibm
 		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
@@ -1377,9 +1374,6 @@ case $basic_machine in
 	*-ibm)
 		os=-aix
 		;;
-    	*-knuth)
-		os=-mmixware
-		;;
 	*-wec)
 		os=-proelf
 		;;
diff --git a/configure b/configure
index 7043ec7..3aaf267 100755
--- a/configure
+++ b/configure
@@ -463,7 +463,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP build build_cpu build_vendor build_os host host_cpu host_vendor host_os LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL GETTEXT_PACKAGE USE_NLS MSGFMT GMSGFMT XGETTEXT CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLLIBS PO_IN_DATADIR_TRUE PO_IN_DATADIR_FALSE POFILES POSUB MKINSTALLDIRS localedir PKG_CONFIG LIBXFCEGUI4_CFLAGS LIBXFCEGUI4_LIBS LIBXFCEGUI4_REQUIRED_VERSION LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP build build_cpu build_vendor build_os host host_cpu host_vendor host_os LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL GETTEXT_PACKAGE USE_NLS MSGFMT GMSGFMT XGETTEXT CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLLIBS PO_IN_DATADIR_TRUE PO_IN_DATADIR_FALSE POFILES POSUB MKINSTALLDIRS localedir PKG_CONFIG LIBXFCEGUI4_CFLAGS LIBXFCEGUI4_LIBS LIBXFCEGUI4_REQUIRED_VERSION LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -1510,7 +1510,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-am__api_version="1.9"
+am__api_version="1.8"
 ac_aux_dir=
 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
   if test -f $ac_dir/install-sh; then
@@ -1687,21 +1687,13 @@ echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
 if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
+  # Keeping the `.' argument allows $(mkdir_p) to be used without
+  # argument.  Indeed, we sometimes output rules like
   #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
+  # where $(somedir) is conditionally defined.
+  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
+  # expensive solution, as it forces Make to start a sub-shell.)
+  mkdir_p='mkdir -p -- .'
 else
   # On NextStep and OpenStep, the `mkdir' command does not
   # recognize any option.  It will interpret all options as
@@ -1845,6 +1837,9 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
 install_sh=${install_sh-"$am_aux_dir/install-sh"}
 
 # Installed binaries are usually stripped using `strip' when the user
@@ -1937,13 +1932,6 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
 
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
 
 
 
@@ -5202,14 +5190,14 @@ bsdi4*)
   ;;
 
 cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
+  # win32_libid is a shell function defined in ltmain.sh
   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
+  lt_cv_file_magic_cmd='win32_libid'
   ;;
 
 mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  # win32_libid shell function, so use a weaker test based on 'objdump'.
   lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
   ;;
@@ -5396,7 +5384,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 5399 "configure"' > conftest.$ac_ext
+  echo '#line 5387 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -5477,6 +5465,24 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   rm -rf conftest*
   ;;
 
+*-*-linux*)
+  # Test if the compiler is 64bit
+  echo 'int i;' > conftest.$ac_ext
+  lt_cv_cc_64bit_output=no
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *"ELF 64"*)
+      lt_cv_cc_64bit_output=yes
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
@@ -6495,7 +6501,7 @@ fi
 
 
 # Provide some information about the compiler.
-echo "$as_me:6498:" \
+echo "$as_me:6504:" \
      "checking for Fortran 77 compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
 { (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
@@ -6650,7 +6656,7 @@ if test "${lt_cv_sys_max_cmd_len+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
     i=0
-  teststring="ABCD"
+  testring="ABCD"
 
   case $build_os in
   msdosdjgpp*)
@@ -6689,16 +6695,16 @@ else
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
-    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
+	       = "XX$testring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$testring" : ".*" 2>&1` &&
 	    lt_cv_sys_max_cmd_len=$new_result &&
 	    test $i != 17 # 1/2 MB should be enough
     do
       i=`expr $i + 1`
-      teststring=$teststring$teststring
+      testring=$testring$testring
     done
-    teststring=
+    testring=
     # Add a significant safety factor because C++ compilers can tack on massive
     # amounts of additional arguments before passing them to the linker.
     # It appears as though 1/2 is a usable value.
@@ -7529,11 +7535,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7532: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7538: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7536: \$? = $ac_status" >&5
+   echo "$as_me:7542: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -7762,11 +7768,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7765: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7771: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7769: \$? = $ac_status" >&5
+   echo "$as_me:7775: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -7822,11 +7828,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7825: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7831: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7829: \$? = $ac_status" >&5
+   echo "$as_me:7835: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8038,7 +8044,7 @@ EOF
       ;;
 
   linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
         tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_cmds="$tmp_archive_cmds"
       supports_anon_versioning=no
@@ -8340,7 +8346,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
+      shrext=".dll"
       # FIXME: Setting linknames here is a bad hack.
       archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
@@ -8796,7 +8802,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -8909,7 +8915,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -8956,6 +8962,30 @@ cygwin* | mingw* | pw32*)
     esac
     ;;
 
+  linux*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        $archive_expsym_cmds="$archive_cmds"
+      fi
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -8974,7 +9004,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -9057,7 +9087,7 @@ hpux9* | hpux10* | hpux11*)
   need_version=no
   case "$host_cpu" in
   ia64*)
-    shrext_cmds='.so'
+    shrext='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -9072,7 +9102,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext_cmds='.sl'
+     shrext='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -9083,7 +9113,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext_cmds='.sl'
+    shrext='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -9152,11 +9182,32 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
+  fi
+
+  case $host_cpu:$lt_cv_cc_64bit_output in
+  powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+    sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+    sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+    ;;
+  esac
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+
+  # Find out which ABI we are using (multilib Linux x86_64 hack).
   libsuff=
   case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 9159 "configure"' > conftest.$ac_ext
+  x86_64*)
+    echo '#line 9210 "configure"' > conftest.$ac_ext
     if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -9165,27 +9216,16 @@ linux*)
       case `/usr/bin/file conftest.$ac_objext` in
       *64-bit*)
         libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
         ;;
       esac
     fi
     rm -rf conftest*
     ;;
+  *)
+    ;;
   esac
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
+  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
   ;;
 
 knetbsd*-gnu)
@@ -9258,7 +9298,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -10027,7 +10067,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 10030 "configure"
+#line 10070 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10125,7 +10165,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 10128 "configure"
+#line 10168 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10250,7 +10290,7 @@ aix3*)
   fi
   ;;
 
-aix4* | aix5*)
+aix4*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -10526,7 +10566,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+shrext='$shrext'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -11441,7 +11481,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -12304,11 +12344,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12307: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12347: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:12311: \$? = $ac_status" >&5
+   echo "$as_me:12351: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -12364,11 +12404,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12367: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12407: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:12371: \$? = $ac_status" >&5
+   echo "$as_me:12411: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -12515,7 +12555,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -12628,7 +12668,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -12675,6 +12715,30 @@ cygwin* | mingw* | pw32*)
     esac
     ;;
 
+  linux*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        $archive_expsym_cmds="$archive_cmds"
+      fi
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -12693,7 +12757,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -12776,7 +12840,7 @@ hpux9* | hpux10* | hpux11*)
   need_version=no
   case "$host_cpu" in
   ia64*)
-    shrext_cmds='.so'
+    shrext='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -12791,7 +12855,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext_cmds='.sl'
+     shrext='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -12802,7 +12866,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext_cmds='.sl'
+    shrext='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -12871,11 +12935,32 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
+  fi
+
+  case $host_cpu:$lt_cv_cc_64bit_output in
+  powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+    sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+    sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+    ;;
+  esac
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+
+  # Find out which ABI we are using (multilib Linux x86_64 hack).
   libsuff=
   case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 12878 "configure"' > conftest.$ac_ext
+  x86_64*)
+    echo '#line 12963 "configure"' > conftest.$ac_ext
     if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -12884,27 +12969,16 @@ linux*)
       case `/usr/bin/file conftest.$ac_objext` in
       *64-bit*)
         libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
         ;;
       esac
     fi
     rm -rf conftest*
     ;;
+  *)
+    ;;
   esac
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
+  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
   ;;
 
 knetbsd*-gnu)
@@ -12977,7 +13051,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -13746,7 +13820,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 13749 "configure"
+#line 13823 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -13844,7 +13918,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 13847 "configure"
+#line 13921 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -14123,7 +14197,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+shrext='$shrext'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -14445,7 +14519,7 @@ aix3*)
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4* | aix5*)
+aix4*)
   test "$enable_shared" = yes && enable_static=no
   ;;
 esac
@@ -14671,11 +14745,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14674: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14748: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:14678: \$? = $ac_status" >&5
+   echo "$as_me:14752: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -14731,11 +14805,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14734: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14808: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:14738: \$? = $ac_status" >&5
+   echo "$as_me:14812: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -14947,7 +15021,7 @@ EOF
       ;;
 
   linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
         tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_cmds_F77="$tmp_archive_cmds"
       supports_anon_versioning=no
@@ -15229,7 +15303,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
+      shrext=".dll"
       # FIXME: Setting linknames here is a bad hack.
       archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
@@ -15685,7 +15759,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -15798,7 +15872,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -15845,6 +15919,30 @@ cygwin* | mingw* | pw32*)
     esac
     ;;
 
+  linux*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        $archive_expsym_cmds="$archive_cmds"
+      fi
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -15863,7 +15961,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -15946,7 +16044,7 @@ hpux9* | hpux10* | hpux11*)
   need_version=no
   case "$host_cpu" in
   ia64*)
-    shrext_cmds='.so'
+    shrext='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -15961,7 +16059,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext_cmds='.sl'
+     shrext='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -15972,7 +16070,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext_cmds='.sl'
+    shrext='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -16041,11 +16139,32 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
+  fi
+
+  case $host_cpu:$lt_cv_cc_64bit_output in
+  powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+    sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+    sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+    ;;
+  esac
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+
+  # Find out which ABI we are using (multilib Linux x86_64 hack).
   libsuff=
   case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 16048 "configure"' > conftest.$ac_ext
+  x86_64*)
+    echo '#line 16167 "configure"' > conftest.$ac_ext
     if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -16054,27 +16173,16 @@ linux*)
       case `/usr/bin/file conftest.$ac_objext` in
       *64-bit*)
         libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
         ;;
       esac
     fi
     rm -rf conftest*
     ;;
+  *)
+    ;;
   esac
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
+  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
   ;;
 
 knetbsd*-gnu)
@@ -16147,7 +16255,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -16488,7 +16596,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+shrext='$shrext'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -16786,11 +16894,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16789: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16897: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:16793: \$? = $ac_status" >&5
+   echo "$as_me:16901: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -17019,11 +17127,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17022: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:17130: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:17026: \$? = $ac_status" >&5
+   echo "$as_me:17134: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -17079,11 +17187,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17082: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:17190: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:17086: \$? = $ac_status" >&5
+   echo "$as_me:17194: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -17295,7 +17403,7 @@ EOF
       ;;
 
   linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
         tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_cmds_GCJ="$tmp_archive_cmds"
       supports_anon_versioning=no
@@ -17597,7 +17705,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .lib files, not .a files.
       libext=lib
       # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
+      shrext=".dll"
       # FIXME: Setting linknames here is a bad hack.
       archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
@@ -18053,7 +18161,7 @@ echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext=".so"
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -18166,7 +18274,7 @@ bsdi4*)
 
 cygwin* | mingw* | pw32*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_version=no
   need_lib_prefix=no
 
@@ -18213,6 +18321,30 @@ cygwin* | mingw* | pw32*)
     esac
     ;;
 
+  linux*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      supports_anon_versioning=no
+      case `$LD -v 2>/dev/null` in
+        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+        *\ 2.11.*) ;; # other 2.11 versions
+        *) supports_anon_versioning=yes ;;
+      esac
+      if test $supports_anon_versioning = yes; then
+        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+      else
+        $archive_expsym_cmds="$archive_cmds"
+      fi
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -18231,7 +18363,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -18314,7 +18446,7 @@ hpux9* | hpux10* | hpux11*)
   need_version=no
   case "$host_cpu" in
   ia64*)
-    shrext_cmds='.so'
+    shrext='.so'
     hardcode_into_libs=yes
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
@@ -18329,7 +18461,7 @@ hpux9* | hpux10* | hpux11*)
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
    hppa*64*)
-     shrext_cmds='.sl'
+     shrext='.sl'
      hardcode_into_libs=yes
      dynamic_linker="$host_os dld.sl"
      shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
@@ -18340,7 +18472,7 @@ hpux9* | hpux10* | hpux11*)
      sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
      ;;
    *)
-    shrext_cmds='.sl'
+    shrext='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
@@ -18409,11 +18541,32 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $ld_extra"
+  fi
+
+  case $host_cpu:$lt_cv_cc_64bit_output in
+  powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
+    sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
+    sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
+    ;;
+  esac
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+
+  # Find out which ABI we are using (multilib Linux x86_64 hack).
   libsuff=
   case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 18416 "configure"' > conftest.$ac_ext
+  x86_64*)
+    echo '#line 18569 "configure"' > conftest.$ac_ext
     if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -18422,27 +18575,16 @@ linux*)
       case `/usr/bin/file conftest.$ac_objext` in
       *64-bit*)
         libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
         ;;
       esac
     fi
     rm -rf conftest*
     ;;
+  *)
+    ;;
   esac
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
+  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
   ;;
 
 knetbsd*-gnu)
@@ -18515,7 +18657,7 @@ openbsd*)
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  shrext=".dll"
   need_lib_prefix=no
   library_names_spec='$libname${shared_ext} $libname.a'
   dynamic_linker='OS/2 ld.exe'
@@ -19284,7 +19426,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 19287 "configure"
+#line 19429 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -19382,7 +19524,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 19385 "configure"
+#line 19527 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -19661,7 +19803,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+shrext='$shrext'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -20106,7 +20248,7 @@ objext="$ac_objext"
 libext="$libext"
 
 # Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+shrext='$shrext'
 
 # Executable file suffix (normally "").
 exeext="$exeext"
@@ -20368,6 +20510,24 @@ echo "$as_me: error: unable to update list of available tagged configurations."
 fi
 
 
+  if test ! -f "${ofile}"; then
+    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
+  fi
+  if test -z "`grep -e 'shared_ext.*shrext' $ofile`"; then
+    # Make sure $shared_ext gets set to $shrext
+    if sed -e 's/shared_ext/shrext/g' "$ofile" > "${ofile}T"; then
+      mv "${ofile}T" "$ofile"
+      chmod +x "$ofile"
+    else
+      rm -f "${ofile}T"
+      { { echo "$as_me:$LINENO: error: unable to update shared_ext." >&5
+echo "$as_me: error: unable to update shared_ext." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+  fi
+
+
 
 # This can be used to rebuild libtool when needed
 LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
@@ -22283,7 +22443,7 @@ echo "${ECHO_T}yes" >&6
   fi
 
 
-                                        ac_config_files="$ac_config_files xfce4-appfinder.spec Makefile po/Makefile.in src/Makefile"
+                                                                      ac_config_files="$ac_config_files xfce4-appfinder.spec Makefile po/Makefile.in src/Makefile doc/Makefile doc/C/Makefile doc/C/images/Makefile"
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -22859,6 +23019,9 @@ do
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
   "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
   "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+  "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+  "doc/C/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/C/Makefile" ;;
+  "doc/C/images/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/C/images/Makefile" ;;
   "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
   "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
   "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
@@ -22958,6 +23121,7 @@ s,@AUTOCONF@,$AUTOCONF,;t t
 s,@AUTOMAKE@,$AUTOMAKE,;t t
 s,@AUTOHEADER@,$AUTOHEADER,;t t
 s,@MAKEINFO@,$MAKEINFO,;t t
+s,@AMTAR@,$AMTAR,;t t
 s,@install_sh@,$install_sh,;t t
 s,@STRIP@,$STRIP,;t t
 s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
@@ -22966,9 +23130,6 @@ s,@mkdir_p@,$mkdir_p,;t t
 s,@AWK@,$AWK,;t t
 s,@SET_MAKE@,$SET_MAKE,;t t
 s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
 s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
 s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
 s,@MAINT@,$MAINT,;t t
@@ -23660,21 +23821,27 @@ echo X"$mf" |
   else
     continue
   fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
   DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
   test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
   # When using ansi2knr, U may be empty or an underscore; expand it
   U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
diff --git a/configure.ac b/configure.ac
index 9a9a2d4..7d8e60e 100644
--- a/configure.ac
+++ b/configure.ac
@@ -37,5 +37,8 @@ xfce4-appfinder.spec
 Makefile
 po/Makefile.in
 src/Makefile
+doc/Makefile
+doc/C/Makefile
+doc/C/images/Makefile
 ])
 
diff --git a/depcomp b/depcomp
index 11e2d3b..25bdb18 100755
--- a/depcomp
+++ b/depcomp
@@ -1,7 +1,7 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2004-05-31.23
+scriptversion=2004-04-25.13
 
 # Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
 
@@ -43,7 +43,6 @@ Environment variables:
   depmode     Dependency tracking mode.
   source      Source file read by `PROGRAMS ARGS'.
   object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
   tmpdepfile  Temporary file to use when outputing dependencies.
   libtool     Whether libtool is used (yes/no).
@@ -62,10 +61,18 @@ if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
 fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+   dir=`echo "$object" | sed 's,/.*$,/,'`
+   if test "$dir" = "$object"; then
+      dir=
+   fi
+   # FIXME: should be _deps on DOS.
+   depfile="$dir.deps/$base"
+fi
 
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
 tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
@@ -288,12 +295,9 @@ tru64)
 
    if test "$libtool" = yes; then
       # Dependencies are output in .lo.d with libtool 1.4.
-      # With libtool 1.5 they are output both in $dir.libs/$base.o.d
-      # and in $dir.libs/$base.o.d and $dir$base.o.d.  We process the
-      # latter, because the former will be cleaned when $dir.libs is
-      # erased.
+      # They are output in .o.d with libtool 1.5.
       tmpdepfile1="$dir.libs/$base.lo.d"
-      tmpdepfile2="$dir$base.o.d"
+      tmpdepfile2="$dir.libs/$base.o.d"
       tmpdepfile3="$dir.libs/$base.d"
       "$@" -Wc,-MD
    else
diff --git a/doc/C/Makefile.am b/doc/C/Makefile.am
new file mode 100644
index 0000000..b6b729c
--- /dev/null
+++ b/doc/C/Makefile.am
@@ -0,0 +1,16 @@
+SUBDIRS = \
+  	 images
+
+noinst_DATA = \
+	xfce4-appfinder.xml 
+
+docdir=$(datadir)/xfce4/doc/C
+
+doc_DATA= \
+	xfce4-appfinder.html 
+
+EXTRA_DIST = $(noinst_DATA) $(doc_DATA)
+
+html: $(srcdir)/xfce4-appfinder.xml
+	xsltproc $(srcdir)/../xfce-nochunk.xsl $(srcdir)/xfce4-appfinder.xml
+
diff --git a/doc/C/Makefile.in b/doc/C/Makefile.in
new file mode 100644
index 0000000..9f40538
--- /dev/null
+++ b/doc/C/Makefile.in
@@ -0,0 +1,512 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = doc/C
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/debug.m4 \
+	$(top_srcdir)/m4/depends.m4 $(top_srcdir)/m4/glib-gettext.m4 \
+	$(top_srcdir)/m4/i18n.m4 $(top_srcdir)/m4/pkg.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+am__installdirs = "$(DESTDIR)$(docdir)"
+docDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(doc_DATA) $(noinst_DATA)
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBXFCEGUI4_CFLAGS = @LIBXFCEGUI4_CFLAGS@
+LIBXFCEGUI4_LIBS = @LIBXFCEGUI4_LIBS@
+LIBXFCEGUI4_REQUIRED_VERSION = @LIBXFCEGUI4_REQUIRED_VERSION@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = \
+  	 images
+
+noinst_DATA = \
+	xfce4-appfinder.xml 
+
+docdir = $(datadir)/xfce4/doc/C
+doc_DATA = \
+	xfce4-appfinder.html 
+
+EXTRA_DIST = $(noinst_DATA) $(doc_DATA)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/C/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  doc/C/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-docDATA: $(doc_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
+	@list='$(doc_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
+	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
+	done
+
+uninstall-docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(doc_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(docdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-docDATA
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-docDATA uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-docDATA install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am uninstall-docDATA \
+	uninstall-info-am
+
+
+html: $(srcdir)/xfce4-appfinder.xml
+	xsltproc $(srcdir)/../xfce-nochunk.xsl $(srcdir)/xfce4-appfinder.xml
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/C/images/Makefile.am b/doc/C/images/Makefile.am
new file mode 100644
index 0000000..e687a93
--- /dev/null
+++ b/doc/C/images/Makefile.am
@@ -0,0 +1,7 @@
+imagesdir = $(datadir)/xfce4/doc/C/images
+images_DATA = \
+	default_appfinder.png \
+	handle-popup.png \
+	item-popup.png
+
+EXTRA_DIST = $(images_DATA)
diff --git a/doc/C/images/Makefile.in b/doc/C/images/Makefile.in
new file mode 100644
index 0000000..836a818
--- /dev/null
+++ b/doc/C/images/Makefile.in
@@ -0,0 +1,363 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = doc/C/images
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/debug.m4 \
+	$(top_srcdir)/m4/depends.m4 $(top_srcdir)/m4/glib-gettext.m4 \
+	$(top_srcdir)/m4/i18n.m4 $(top_srcdir)/m4/pkg.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__installdirs = "$(DESTDIR)$(imagesdir)"
+imagesDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(images_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBXFCEGUI4_CFLAGS = @LIBXFCEGUI4_CFLAGS@
+LIBXFCEGUI4_LIBS = @LIBXFCEGUI4_LIBS@
+LIBXFCEGUI4_REQUIRED_VERSION = @LIBXFCEGUI4_REQUIRED_VERSION@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+imagesdir = $(datadir)/xfce4/doc/C/images
+images_DATA = \
+	default_appfinder.png \
+	handle-popup.png \
+	item-popup.png
+
+EXTRA_DIST = $(images_DATA)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/C/images/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  doc/C/images/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-imagesDATA: $(images_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(imagesdir)" || $(mkdir_p) "$(DESTDIR)$(imagesdir)"
+	@list='$(images_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(imagesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(imagesdir)/$$f'"; \
+	  $(imagesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(imagesdir)/$$f"; \
+	done
+
+uninstall-imagesDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(images_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f '$(DESTDIR)$(imagesdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(imagesdir)/$$f"; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(imagesdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-imagesDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-imagesDATA uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-imagesDATA install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-imagesDATA uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/C/images/default_appfinder.png b/doc/C/images/default_appfinder.png
new file mode 100644
index 0000000..ac268e1
--- /dev/null
+++ b/doc/C/images/default_appfinder.png
diff --git a/doc/C/images/handle-popup.png b/doc/C/images/handle-popup.png
new file mode 100644
index 0000000..14a07e3
--- /dev/null
+++ b/doc/C/images/handle-popup.png
diff --git a/doc/C/images/item-popup.png b/doc/C/images/item-popup.png
new file mode 100644
index 0000000..69b2ff7
--- /dev/null
+++ b/doc/C/images/item-popup.png
diff --git a/doc/C/xfce4-appfinder.html b/doc/C/xfce4-appfinder.html
new file mode 100644
index 0000000..7bbcae7
--- /dev/null
+++ b/doc/C/xfce4-appfinder.html
@@ -0,0 +1,49 @@
+<html><head><meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"><title>Xfce 4 Appfinder</title><link rel="stylesheet" href="../xfce.css" type="text/css"><meta name="generator" content="DocBook XSL Stylesheets V1.65.1"><link rel="home" href="#xfce4-appfinder" title="Xfce 4 Appfinder"><link rel="next" href="#appfinder-intro" title="Introduction"></head><body bgcolor="white" text="black" link="#0000FF" vlink="#840084" alink="#0000FF"><div class="article" lang="en"><div class="titlepage"><div><div><h1 class="title"><a name="xfce4-appfinder"></a>Xfce 4 Appfinder</h1></div><div><div class="authorgroup"><div class="author"><h3 class="author"><span class="firstname">Eduard</span> <span class="surname">Roccatello</span></h3><div class="affiliation"><div class="address"><p><tt class="email">&lt;<a href="mailto:eduard@xfce.org">eduard@xfce.org</a>&gt;</tt></p></div></div></div></div></div><div><span xmlns="http://www.w3.org/TR/xhtml1/transitional" class="releaseinfo">This manual describes <b xmlns="" class="application"><tt>xfce4-appfinder</tt></b> version 4.2. 
+    Last updated: November 2004
+  <br></br></span></div><div><p class="copyright">Copyright © 2004 Eduard Roccatello</p></div></div><div></div><hr></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="sect1"><a href="#appfinder-intro">Introduction</a></span></dt><dt><span class="sect1"><a href="#appfinder-getting-started">Getting Started</a></span></dt><dt><span class="sect1"><a href="#appfinder-advanced">Appfinder Advanced features</a></span></dt><dt><span class="sect1"><a href="#appfinder-copyright">About xfce4-appfinder</a></span></dt></dl></div><p> </p><div class="sect1" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="appfinder-intro"></a>Introduction</h2></div></div><div></div></div><p>
+    The Xfce 4 Appfinder is part of the <a href="http://www.xfce.org" target="_top">Xfce 4 Desktop Environment</a> and features application
+      search on the whole system. It searches for .desktop files based on the
+      freedesktop spec and makes an index of the found apps.
+  </p></div><p> </p><div class="sect1" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="appfinder-getting-started"></a>Getting Started</h2></div></div><div></div></div><p>You can start Appfinder from console running "xfce4-appfinder" command
+        or launching it through panel launcher icon.
+  </p><p>
+    When you start the appfineder you will see a window appearing center
+    of your screen, looking like this:
+  </p><div class="figure"><a name="default-appfinder-fig"></a><p class="title"><b>Figure 1. Xfce4 Appfinder</b></p><div class="screenshot"><div class="mediaobject"><img src="images/default_appfinder.png" alt="Xfce4 Appfinder window is splitted in two parts: on the left we have
+        categories and on the right found applications matching the category chosen.
+        It also include a box to search applications matching a particular keyword.
+	  "></div></div></div><p>
+    Double clicking an application will launch it, while a right click will
+    show up a pop up menu, where getting informations about the selected item.
+  </p><div class="figure"><a name="handle-popup-fig"></a><p class="title"><b>Figure 2. Popup menu</b></p><div class="screenshot"><div class="mediaobject"><img src="images/handle-popup.png" alt="Right click popup menu."></div></div></div><p>
+  The informations window is useful to get all details of a desktop file entry.
+  We can get informations about Name, Comment, Categories and Command.
+  </p><div class="figure"><a name="item-popup-fig"></a><p class="title"><b>Figure 3. Item informations window</b></p><div class="screenshot"><div class="mediaobject"><img src="images/item-popup.png" alt="Item informations window."></div></div></div></div><p> </p><div class="sect1" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="appfinder-advanced"></a>Appfinder Advanced features</h2></div></div><div></div></div><p>
+    The Xfce 4 appfinder has the possibility to interact with other applications
+    through drag and drop. At the actual state it can drop things on Xfce 4 menu editor
+    and on some parts of Xfce 4 panel.
+  </p><p>
+    You can edit desktop menu through Xfce 4 menu editor using drag and drop from Xfce 4 Appfinder.
+    Searching applications and adding it to desktop menu will be easier to do and faster.
+    You have only to select an item from the appfinder list and drag it on the menu editor list and
+    enjoy the result.
+  </p><p>
+    Xfce 4 appfinder also support drag and drop on Xfce 4 panel launcher settings window.
+    You can drop appfinder items on the Command text entry of Xfce 4 panel launcher settings and get
+    the full command written. A fast way to add a new application.
+  </p></div><p> </p><div class="sect1" lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a name="appfinder-copyright"></a>About <b class="application"><tt>xfce4-appfinder</tt></b></h2></div></div><div></div></div><p><b class="application"><tt>xfce4-appfinder</tt></b> was written by Eduard Roccatello 
+    (<tt class="email">&lt;<a href="mailto:eduard@xfce.org">eduard@xfce.org</a>&gt;</tt>). To find more information, please visit 
+    the <a href="http://www.xfce.org" target="_top">Xfce web site</a>. 
+  </p><p>To report a bug or make a suggestion regarding this application or
+    this manual, use the bug tracking system at <a href="http://bugzilla.xfce.org/" target="_top">http://bugzilla.xfce.org/</a>. 
+  </p><p>If you have questions about the use or installation of this package,
+    please ask on the <a href="http://lunar-linux.org/mailman/listinfo/xfce" target="_top">xfce</a> mailing list. Development discussion takes
+    place on the <a href="http://lunar-linux.org/mailman/listinfo/xfce4-dev" target="_top">xfce4-dev</a> mailing list.
+  </p><p><b class="application"><tt>xfce4-appfinder</tt></b> is distributed under the terms of the
+    GNU General Public License as published by the Free Software Foundation; 
+    either version 2 of the License, or (at your option) any later version.
+  </p><p>You should have received a copy of the GNU General Public License 
+    along with this program; if not, write to the Free Software 
+    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, 
+    USA.
+  </p></div></div></body></html>
diff --git a/doc/C/xfce4-appfinder.xml b/doc/C/xfce4-appfinder.xml
new file mode 100644
index 0000000..79af593
--- /dev/null
+++ b/doc/C/xfce4-appfinder.xml
@@ -0,0 +1,240 @@
+<?xml version='1.0'?> 
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" 
+          "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
+  <!ENTITY manrevision "1.2"> 
+  <!ENTITY date "November 2004"> 
+  <!ENTITY appversion "4.2"> 
+  <!ENTITY app "<application>xfce4-appfinder</application>">
+]>
+
+<article id="xfce4-appfinder" lang="en">
+
+<!-- Header --> 
+<articleinfo>
+
+  <title>Xfce 4 Appfinder</title>
+  
+  <copyright>
+    <year>2004</year> <holder>Eduard Roccatello</holder>
+  </copyright>
+
+<!-- translators: uncomment this:
+
+  <copyright>
+   <year>2002</year> <holder>ME-THE-TRANSLATOR (Latin
+   translation)</holder>
+  </copyright>
+
+ -->
+
+<!-- I don't know about this
+  <legalnotice id="legalnotice">
+    <para>
+      This document is provided under the terms of the GNU GPL, version
+      2 or (at your option) any later version.
+    </para>
+  </legalnotice>
+-->
+  <authorgroup>
+
+    <author>
+      <firstname>Eduard</firstname> <surname>Roccatello</surname>
+      <affiliation>
+	<address><email>eduard@xfce.org</email></address>
+      </affiliation>
+    </author>
+
+<!-- This is appropriate place for other contributors: translators,
+maintainers, etc. Commented out by default.
+
+    <othercredit role="translator">
+      <firstname>Latin</firstname> <surname>Translator 1</surname>
+      <affiliation>
+	<orgname>Latin Translation Team</orgname>
+	<address><email>translator@gnome.org</email> </address>
+      </affiliation> <contrib>Latin translation</contrib>
+    </othercredit>
+-->
+
+  </authorgroup>
+
+  <!--
+  <revhistory>
+    <revision>
+      <revnumber>0.4</revnumber> 
+      <date>May 2003</date>
+      <authorinitials>jbh</authorinitials>
+    </revision>
+    <revision>
+      <revnumber>0.3</revnumber> 
+      <date>February 2003</date>
+      <authorinitials>jbh</authorinitials>
+    </revision>
+  </revhistory>
+  -->
+
+  <releaseinfo>This manual describes &app; version &appversion;. 
+    Last updated: &date;
+  </releaseinfo>
+
+</articleinfo>
+
+  <!-- extra space -->
+  <para>&nbsp;</para>
+  
+<sect1 id="appfinder-intro">
+  <title>Introduction</title>
+
+  <para>
+    The Xfce 4 Appfinder is part of the <ulink url="http://www.xfce.org" 
+      type="html">Xfce 4 Desktop Environment</ulink> and features application
+      search on the whole system. It searches for .desktop files based on the
+      freedesktop spec and makes an index of the found apps.
+  </para>
+
+</sect1>
+
+  <!-- extra space -->
+  <para>&nbsp;</para>
+  
+<sect1 id="appfinder-getting-started">
+  <title>Getting Started</title>
+  
+  <para>You can start Appfinder from console running "xfce4-appfinder" command
+        or launching it through panel launcher icon.
+  </para>
+
+  <para>
+    When you start the appfineder you will see a window appearing center
+    of your screen, looking like this:
+  </para>
+
+  <figure id="default-appfinder-fig">
+    <title>Xfce4 Appfinder</title> 
+    <screenshot>
+      <mediaobject>
+	<imageobject>
+	  <imagedata fileref="images/default_appfinder.png" format="PNG"/>
+	</imageobject> 
+	<textobject>
+	  <phrase>Xfce4 Appfinder window is splitted in two parts: on the left we have
+        categories and on the right found applications matching the category chosen.
+        It also include a box to search applications matching a particular keyword.
+	  </phrase>
+	</textobject>
+      </mediaobject>
+    </screenshot>
+  </figure>
+
+  <para>
+    Double clicking an application will launch it, while a right click will
+    show up a pop up menu, where getting informations about the selected item.
+  </para>
+
+  <figure id="handle-popup-fig">
+    <title>Popup menu</title> 
+    <screenshot>
+      <mediaobject>
+	<imageobject>
+	  <imagedata fileref="images/handle-popup.png" format="PNG"/>
+	</imageobject> 
+	<textobject>
+	  <phrase>Right click popup menu.</phrase>
+	</textobject>
+      </mediaobject>
+    </screenshot>
+  </figure>
+
+  <para>
+  The informations window is useful to get all details of a desktop file entry.
+  We can get informations about Name, Comment, Categories and Command.
+  </para>
+
+  <figure id="item-popup-fig">
+    <title>Item informations window</title> 
+    <screenshot>
+      <mediaobject>
+	<imageobject>
+	  <imagedata fileref="images/item-popup.png" format="PNG"/>
+	</imageobject> 
+	<!-- 
+	<imageobject>
+	  <imagedata fileref="images/item-popup.eps" format="EPS"/>
+	</imageobject> 
+	--> 
+	<textobject>
+	  <phrase>Item informations window.</phrase>
+	</textobject>
+      </mediaobject>
+    </screenshot>
+  </figure>
+
+</sect1>
+
+  <!-- extra space -->
+  <para>&nbsp;</para>
+  
+<sect1 id="appfinder-advanced">
+  <title>Appfinder Advanced features</title>
+
+  <para>
+    The Xfce 4 appfinder has the possibility to interact with other applications
+    through drag and drop. At the actual state it can drop things on Xfce 4 menu editor
+    and on some parts of Xfce 4 panel.
+  </para>
+  
+  <para>
+    You can edit desktop menu through Xfce 4 menu editor using drag and drop from Xfce 4 Appfinder.
+    Searching applications and adding it to desktop menu will be easier to do and faster.
+    You have only to select an item from the appfinder list and drag it on the menu editor list and
+    enjoy the result.
+  </para>
+
+  <para>
+    Xfce 4 appfinder also support drag and drop on Xfce 4 panel launcher settings window.
+    You can drop appfinder items on the Command text entry of Xfce 4 panel launcher settings and get
+    the full command written. A fast way to add a new application.
+  </para>
+</sect1>
+
+  
+  <!-- extra space -->
+  <para>&nbsp;</para>
+  
+<sect1 id="appfinder-copyright">
+  <title>About &app;</title>
+
+  <para>&app; was written by Eduard Roccatello 
+    (<email>eduard@xfce.org</email>). To find more information, please visit 
+    the <ulink url="http://www.xfce.org" type="http">Xfce web site</ulink>. 
+  </para>
+
+  <para>To report a bug or make a suggestion regarding this application or
+    this manual, use the bug tracking system at <ulink 
+      url="http://bugzilla.xfce.org/" 
+      type="http">http://bugzilla.xfce.org/</ulink>. 
+  </para>
+
+  <para>If you have questions about the use or installation of this package,
+    please ask on the <ulink 
+      url="http://lunar-linux.org/mailman/listinfo/xfce"
+      type="http">xfce</ulink> mailing list. Development discussion takes
+    place on the <ulink 
+      url="http://lunar-linux.org/mailman/listinfo/xfce4-dev"
+      type="http">xfce4-dev</ulink> mailing list.
+  </para>
+    
+  <para>&app; is distributed under the terms of the
+    GNU General Public License as published by the Free Software Foundation; 
+    either version 2 of the License, or (at your option) any later version.
+  </para>
+
+  <para>You should have received a copy of the GNU General Public License 
+    along with this program; if not, write to the Free Software 
+    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, 
+    USA.
+  </para>
+
+</sect1>
+
+</article>
diff --git a/doc/Makefile.am b/doc/Makefile.am
new file mode 100644
index 0000000..660b25d
--- /dev/null
+++ b/doc/Makefile.am
@@ -0,0 +1,10 @@
+SUBDIRS = \
+	C 
+
+noinst_DATA = \
+	xfce-nochunk.xsl
+
+EXTRA_DIST = $(noinst_DATA)
+
+html: Makefile
+	make -C C html
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..4f05c29
--- /dev/null
+++ b/doc/Makefile.in
@@ -0,0 +1,485 @@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/debug.m4 \
+	$(top_srcdir)/m4/depends.m4 $(top_srcdir)/m4/glib-gettext.m4 \
+	$(top_srcdir)/m4/i18n.m4 $(top_srcdir)/m4/pkg.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+DATA = $(noinst_DATA)
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBXFCEGUI4_CFLAGS = @LIBXFCEGUI4_CFLAGS@
+LIBXFCEGUI4_LIBS = @LIBXFCEGUI4_LIBS@
+LIBXFCEGUI4_REQUIRED_VERSION = @LIBXFCEGUI4_REQUIRED_VERSION@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = \
+	C 
+
+noinst_DATA = \
+	xfce-nochunk.xsl
+
+EXTRA_DIST = $(noinst_DATA)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+
+html: Makefile
+	make -C C html
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/xfce-nochunk.xsl b/doc/xfce-nochunk.xsl
new file mode 100644
index 0000000..f6a7eab
--- /dev/null
+++ b/doc/xfce-nochunk.xsl
@@ -0,0 +1,270 @@
+<?xml version='1.0'?>
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+                version='1.0'
+                xmlns="http://www.w3.org/TR/xhtml1/transitional"
+                exclude-result-prefixes="#default">
+
+<!-- Load onechunk.xsl stylesheet 
+     TODO: how can I put a location independent link here?
+This should work. The url can be translated to a local one in the catalog
+file"
+-->
+<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/html/onechunk.xsl"/>
+
+<xsl:param name="suppress.navigation">1</xsl:param>
+
+<!-- Use stylesheet -->
+<xsl:param name="html.stylesheet" select="'../xfce.css'"/>
+
+<!-- labels and numbering -->
+<xsl:param name="autotoc.label.separator" select="'. '"/>
+<xsl:param name="chapter.autolabel" select="1"/>
+
+<!-- Don't force the use of index.html as root filename -->
+<xsl:param name="root.filename" select="''"/>
+
+<!--  Use element id (if present) as file name  -->
+<xsl:variable name="use.id.as.filename">1</xsl:variable>
+
+<xsl:template match="releaseinfo" mode="titlepage.mode">
+  <span class="{name(.)}">
+    <xsl:apply-templates mode="titlepage.mode"/>
+    <br/>
+  </span>
+</xsl:template>
+
+<!-- Use graphics in admonitions (note, warning, etc)  -->
+<xsl:variable name="admon.graphics">0</xsl:variable>
+
+<xsl:param name="admon.style">
+	<xsl:text>text-align: left;</xsl:text></xsl:param>
+
+<xsl:variable name="admon.graphics.path">stylesheet-images/</xsl:variable>
+
+<xsl:variable name="admon.graphics.extension">.gif</xsl:variable>
+
+<xsl:param name="table.border.thickness" select="'0.2pt'"/>
+
+<xsl:param name="graphic.default.extension" select="png"/>
+
+<xsl:attribute-set name="shade.verbatim.style">
+	<xsl:attribute name="border">0</xsl:attribute>
+	<xsl:attribute name="bgcolor">#E0E0E0</xsl:attribute>
+	<xsl:attribute name="width">100%</xsl:attribute>
+</xsl:attribute-set>
+
+<!-- Addition by Jasper Huijsmans to be able to set background color -->
+<!-- and cell attributes. -->
+<!-- This requires an adapted template for tgroup (see end of stylesheet) -->
+<xsl:attribute-set name="table.style">
+	<xsl:attribute name="bgcolor">#E0E0E0</xsl:attribute>
+	<xsl:attribute name="cellspacing">0</xsl:attribute>
+	<xsl:attribute name="cellpadding">4</xsl:attribute>
+</xsl:attribute-set>
+
+
+<xsl:param name="generate.legalnotice.link" select="0"/>
+
+<xsl:param name="shade.verbatim" select="1"/>
+
+<!-- set font styles for various tags   -->
+<xsl:template match="guibutton">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<xsl:template match="guiicon">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<xsl:template match="guilabel">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<xsl:template match="guimenu">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<xsl:template match="guimenuitem">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<xsl:template match="guisubmenu">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<xsl:template match="application">
+<xsl:call-template name="inline.boldmonoseq"/>
+</xsl:template>
+
+<xsl:template match="caption">
+<xsl:call-template name="inline.boldseq"/>
+</xsl:template>
+
+<!-- Adapted template for tgroup. The only change is the addition of -->
+<!-- table.style attributes -->
+<xsl:template match="tgroup">
+  <table xsl:use-attribute-sets="table.style">
+    <xsl:choose>
+      <!-- If there's a <?dbhtml table-summary="foo"?> PI, use it for
+           the HTML table summary attribute -->
+      <xsl:when test="processing-instruction('dbhtml')">
+        <xsl:variable name="summary">
+          <xsl:call-template name="dbhtml-attribute">
+            <xsl:with-param name="pis"
+                            select="processing-instruction('dbhtml')[1]"/>
+            <xsl:with-param name="attribute" select="'table-summary'"/>
+          </xsl:call-template>
+        </xsl:variable>
+        <xsl:if test="$summary != ''">
+          <xsl:attribute name="summary">
+            <xsl:value-of select="$summary"/>
+          </xsl:attribute>
+        </xsl:if>
+      </xsl:when>
+      <!-- Otherwise, if there's a title, use that -->
+      <xsl:when test="../title">
+        <xsl:attribute name="summary">
+          <xsl:value-of select="string(../title)"/>
+        </xsl:attribute>
+      </xsl:when>
+      <!-- Otherwise, forget the whole idea -->
+      <xsl:otherwise><!-- nevermind --></xsl:otherwise>
+    </xsl:choose>
+
+    <xsl:if test="../@pgwide=1">
+      <xsl:attribute name="width">100%</xsl:attribute>
+    </xsl:if>
+
+    <xsl:choose>
+      <xsl:when test="../@frame='none'">
+        <xsl:attribute name="border">0</xsl:attribute>
+      </xsl:when>
+      <xsl:when test="$table.borders.with.css != 0">
+        <xsl:attribute name="border">0</xsl:attribute>
+        <xsl:choose>
+          <xsl:when test="../@frame='topbot' or ../@frame='top'">
+            <xsl:attribute name="style">
+              <xsl:call-template name="border">
+                <xsl:with-param name="side" select="'top'"/>
+              </xsl:call-template>
+            </xsl:attribute>
+          </xsl:when>
+          <xsl:when test="../@frame='sides'">
+            <xsl:attribute name="style">
+              <xsl:call-template name="border">
+                <xsl:with-param name="side" select="'left'"/>
+              </xsl:call-template>
+              <xsl:call-template name="border">
+                <xsl:with-param name="side" select="'right'"/>
+              </xsl:call-template>
+            </xsl:attribute>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:attribute name="border">1</xsl:attribute>
+      </xsl:otherwise>
+    </xsl:choose>
+
+    <xsl:variable name="colgroup">
+      <colgroup>
+        <xsl:call-template name="generate.colgroup">
+          <xsl:with-param name="cols" select="@cols"/>
+        </xsl:call-template>
+      </colgroup>
+    </xsl:variable>
+
+    <xsl:variable name="explicit.table.width">
+      <xsl:call-template name="dbhtml-attribute">
+        <xsl:with-param name="pis"
+                        select="../processing-instruction('dbhtml')[1]"/>
+        <xsl:with-param name="attribute" select="'table-width'"/>
+      </xsl:call-template>
+    </xsl:variable>
+
+    <xsl:variable name="table.width">
+      <xsl:choose>
+        <xsl:when test="$explicit.table.width != ''">
+          <xsl:value-of select="$explicit.table.width"/>
+        </xsl:when>
+        <xsl:when test="$default.table.width = ''">
+          <xsl:text>100%</xsl:text>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:value-of select="$default.table.width"/>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:variable>
+
+    <xsl:if test="$default.table.width != ''
+                  or $explicit.table.width != ''">
+      <xsl:attribute name="width">
+        <xsl:choose>
+          <xsl:when test="contains($table.width, '%')">
+            <xsl:value-of select="$table.width"/>
+          </xsl:when>
+          <xsl:when test="$use.extensions != 0
+                          and $tablecolumns.extension != 0">
+            <xsl:choose>
+              <xsl:when test="function-available('stbl:convertLength')">
+                <xsl:value-of select="stbl:convertLength($table.width)"/>
+              </xsl:when>
+              <xsl:when test="function-available('xtbl:convertLength')">
+                <xsl:value-of select="xtbl:convertLength($table.width)"/>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:message terminate="yes">
+                  <xsl:text>No convertLength function available.</xsl:text>
+                </xsl:message>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:value-of select="$table.width"/>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:attribute>
+    </xsl:if>
+
+    <xsl:choose>
+      <xsl:when test="$use.extensions != 0
+                      and $tablecolumns.extension != 0">
+        <xsl:choose>
+          <xsl:when test="function-available('stbl:adjustColumnWidths')">
+            <xsl:copy-of select="stbl:adjustColumnWidths($colgroup)"/>
+          </xsl:when>
+          <xsl:when test="function-available('xtbl:adjustColumnWidths')">
+            <xsl:copy-of select="xtbl:adjustColumnWidths($colgroup)"/>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:message terminate="yes">
+              <xsl:text>No adjustColumnWidths function available.</xsl:text>
+            </xsl:message>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:copy-of select="$colgroup"/>
+      </xsl:otherwise>
+    </xsl:choose>
+
+    <xsl:apply-templates select="thead"/>
+    <xsl:apply-templates select="tbody"/>
+    <xsl:apply-templates select="tfoot"/>
+
+    <xsl:if test=".//footnote">
+      <tbody class="footnotes">
+        <tr>
+          <td colspan="{@cols}">
+            <xsl:apply-templates select=".//footnote" 
+                                 mode="table.footnote.mode"/>
+          </td>
+        </tr>
+      </tbody>
+    </xsl:if>
+  </table>
+</xsl:template>
+
+
+</xsl:stylesheet>
+
diff --git a/install-sh b/install-sh
index dd97db7..e4160c9 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-09-10.20
+scriptversion=2004-04-01.17
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -58,6 +58,9 @@ stripprog="${STRIPPROG-strip}"
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
+transformbasename=
+transform_arg=
+instcmd="$mvprog"
 chmodcmd="$chmodprog 0755"
 chowncmd=
 chgrpcmd=
@@ -67,27 +70,23 @@ mvcmd="$mvprog"
 src=
 dst=
 dir_arg=
-dstarg=
-no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
+   or: $0 -d DIRECTORIES...
 
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
+In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
+In the second, create the directory path DIR.
 
 Options:
--c         (ignored)
+-b=TRANSFORMBASENAME
+-c         copy source (using $cpprog) instead of moving (using $mvprog).
 -d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
+-g GROUP   $chgrp installed files to GROUP.
+-m MODE    $chmod installed files to MODE.
+-o USER    $chown installed files to USER.
+-s         strip installed files (using $stripprog).
+-t=TRANSFORM
 --help     display this help and exit.
 --version  display version info and exit.
 
@@ -97,7 +96,12 @@ Environment variables override the default commands:
 
 while test -n "$1"; do
   case $1 in
-    -c) shift
+    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+        shift
+        continue;;
+
+    -c) instcmd=$cpprog
+        shift
         continue;;
 
     -d) dir_arg=true
@@ -125,20 +129,14 @@ while test -n "$1"; do
         shift
         continue;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+        shift
+        continue;;
 
     --version) echo "$0 $scriptversion"; exit 0;;
 
     *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
+	test -n "$dir_arg" && break
         # Otherwise, the last argument is the destination.  Remove it from $@.
 	for arg
 	do
@@ -176,13 +174,13 @@ do
     src=
 
     if test -d "$dst"; then
-      mkdircmd=:
+      instcmd=:
       chmodcmd=
     else
-      mkdircmd=$mkdirprog
+      instcmd=$mkdirprog
     fi
   else
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
     if test ! -f "$src" && test ! -d "$src"; then
@@ -204,10 +202,6 @@ do
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
       dst=$dst/`basename "$src"`
     fi
   fi
@@ -235,42 +229,51 @@ do
       pathcomp=$pathcomp$1
       shift
       if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
+        $mkdirprog "$pathcomp" || lasterr=$?
 	# mkdir can fail with a `File exist' error in case several
 	# install-sh are creating the directory concurrently.  This
 	# is OK.
-	test -d "$pathcomp" || exit
+	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
       fi
       pathcomp=$pathcomp/
     done
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
+    $doit $instcmd "$dst" \
       && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
       && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
       && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
 
   else
-    dstfile=`basename "$dst"`
+    # If we're going to rename the final executable, determine the name now.
+    if test -z "$transformarg"; then
+      dstfile=`basename "$dst"`
+    else
+      dstfile=`basename "$dst" $transformbasename \
+               | sed $transformarg`$transformbasename
+    fi
+
+    # don't allow the sed command to completely eliminate the filename.
+    test -z "$dstfile" && dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
     rmtmp=$dstdir/_rm.$$_
 
     # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
     trap '(exit $?); exit' 1 2 13 15
 
-    # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    # Move or copy the file name to the temp name
+    $doit $instcmd "$src" "$dsttmp" &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
     # If any of these fail, we abort the whole thing.  If we want to
     # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    # errors from the above "$doit $instcmd $src $dsttmp" command.
     #
     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
diff --git a/ltmain.sh b/ltmain.sh
index c13e957..08ef6f8 100644
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,7 +1,7 @@
 # ltmain.sh - Provide generalized library-building support services.
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
 # Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -24,29 +24,6 @@
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)"
-
-
 # Check that we have a working $echo.
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
@@ -59,7 +36,7 @@ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
   :
 else
   # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
 fi
 
 if test "X$1" = X--fallback-echo; then
@@ -68,9 +45,22 @@ if test "X$1" = X--fallback-echo; then
   cat <<EOF
 $*
 EOF
-  exit $EXIT_SUCCESS
+  exit 0
 fi
 
+# define SED for historic ltconfig's generated by Libtool 1.3
+test -z "$SED" && SED=sed
+
+# The name of this program.
+progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.2
+TIMESTAMP=" (1.1220.2.60 2004/01/25 12:25:08)"
+
 default_mode=
 help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
@@ -113,7 +103,7 @@ fi
 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
   $echo "$modename: not configured to build any kind of library" 1>&2
   $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
+  exit 1
 fi
 
 # Global variables.
@@ -128,17 +118,38 @@ execute_dlfiles=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 
+if test -z "$max_cmd_len"; then
+  i=0
+  testring="ABCD"
+  new_result=
+  
+  # If test is not a shell built-in, we'll probably end up computing a
+  # maximum length that is only half of the actual maximum length, but
+  # we can't tell.
+  while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
+             = "XX$testring") >/dev/null 2>&1 &&
+          new_result=`expr "X$testring" : ".*" 2>&1` &&
+          max_cmd_len="$new_result" &&
+          test "$i" != 17 # 1/2 MB should be enough
+  do
+    i=`expr $i + 1`
+    testring="$testring$testring"
+  done
+  testring=
+  # Add a significant safety factor because C++ compilers can tack on massive
+  # amounts of additional arguments before passing them to the linker.
+  # It appears as though 1/2 is a usable value.
+  max_cmd_len=`expr $max_cmd_len \/ 2`
+fi
+
 #####################################
 # Shell function definitions:
 # This seems to be the best place for them
 
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-func_win32_libid () {
+win32_libid () {
   win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
@@ -147,7 +158,7 @@ func_win32_libid () {
     ;;
   *ar\ archive*) # could be an import, or static
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 | \
 	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
       if test "X$win32_nmres" = "Ximport" ; then
@@ -157,7 +168,7 @@ func_win32_libid () {
       fi
     fi
     ;;
-  *DLL*)
+  *DLL*) 
     win32_libid_type="x86 DLL"
     ;;
   *executable*) # but shell scripts are "executable" too...
@@ -171,76 +182,9 @@ func_win32_libid () {
   $echo $win32_libid_type
 }
 
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag () {
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
 # End of Shell function definitions
 #####################################
 
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
 # Parse our command line options once, thoroughly.
 while test "$#" -gt 0
 do
@@ -266,7 +210,7 @@ do
       case $tagname in
       *[!-_A-Za-z0-9,/]*)
 	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
+	exit 1
 	;;
       esac
 
@@ -276,10 +220,10 @@ do
 	# not specially marked.
 	;;
       *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
 	  taglist="$taglist $tagname"
 	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
 	else
 	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
 	fi
@@ -308,16 +252,16 @@ do
     $echo "Copyright (C) 2003  Free Software Foundation, Inc."
     $echo "This is free software; see the source for copying conditions.  There is NO"
     $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $EXIT_SUCCESS
+    exit 0
     ;;
 
   --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
     # Now print the configurations for the tags.
     for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
     done
-    exit $EXIT_SUCCESS
+    exit 0
     ;;
 
   --debug)
@@ -342,7 +286,7 @@ do
     else
       $echo "disable static libraries"
     fi
-    exit $EXIT_SUCCESS
+    exit 0
     ;;
 
   --finish) mode="finish" ;;
@@ -373,7 +317,7 @@ do
   -*)
     $echo "$modename: unrecognized option \`$arg'" 1>&2
     $echo "$help" 1>&2
-    exit $EXIT_FAILURE
+    exit 1
     ;;
 
   *)
@@ -386,7 +330,7 @@ done
 if test -n "$prevopt"; then
   $echo "$modename: option \`$prevopt' requires an argument" 1>&2
   $echo "$help" 1>&2
-  exit $EXIT_FAILURE
+  exit 1
 fi
 
 # If this variable is set in any of the actions, the command in it
@@ -442,7 +386,7 @@ if test -z "$show_help"; then
   if test -n "$execute_dlfiles" && test "$mode" != execute; then
     $echo "$modename: unrecognized option \`-dlopen'" 1>&2
     $echo "$help" 1>&2
-    exit $EXIT_FAILURE
+    exit 1
   fi
 
   # Change the help message to a mode-specific one.
@@ -484,7 +428,7 @@ if test -z "$show_help"; then
 	-o)
 	  if test -n "$libobj" ; then
 	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	  arg_mode=target
 	  continue
@@ -509,7 +453,7 @@ if test -z "$show_help"; then
 	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
 	  lastarg=
 	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
+	  for arg in $args; do
 	    IFS="$save_ifs"
 
 	    # Double-quote args containing other shell metacharacters.
@@ -559,11 +503,11 @@ if test -z "$show_help"; then
     case $arg_mode in
     arg)
       $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
+      exit 1
       ;;
     target)
       $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
       ;;
     *)
       # Get the name of the library object.
@@ -596,11 +540,56 @@ if test -z "$show_help"; then
     *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
     *)
       $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
       ;;
     esac
 
-    func_infer_tag $base_compile
+    # Infer tagged configuration to use if any are available and
+    # if one wasn't chosen via the "--tag" command line option.
+    # Only attempt this if the compiler in the base compile
+    # command doesn't match the default compiler.
+    if test -n "$available_tags" && test -z "$tagname"; then
+      case $base_compile in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+	    # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
+	    trimedcc="${CC/${host}-}"
+	    case "$base_compile " in
+	    "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*)
+	    tagname=CC
+	    break ;;
+	    "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*|\
+	    "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit 1
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
 
     for arg in $later; do
       case $arg in
@@ -633,7 +622,7 @@ if test -z "$show_help"; then
     if test -z "$base_compile"; then
       $echo "$modename: you must specify a compilation command" 1>&2
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     # Delete any leftover library objects.
@@ -644,7 +633,7 @@ if test -z "$show_help"; then
     fi
 
     $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+    trap "$run $rm $removelist; exit 1" 1 2 15
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
@@ -663,7 +652,7 @@ if test -z "$show_help"; then
       output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
       removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+      trap "$run $rm $removelist; exit 1" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -673,7 +662,7 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+      until $run ln "$0" "$lockfile" 2>/dev/null; do
 	$show "Waiting for $lockfile to be removed"
 	sleep 2
       done
@@ -691,7 +680,7 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit $EXIT_FAILURE
+	exit 1
       fi
       $echo $srcfile > "$lockfile"
     fi
@@ -746,7 +735,7 @@ EOF
       if $run eval "$command"; then :
       else
 	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
+	exit 1
       fi
 
       if test "$need_locks" = warn &&
@@ -766,7 +755,7 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit $EXIT_FAILURE
+	exit 1
       fi
 
       # Just move the object if needed, then go on to compile the next one
@@ -818,7 +807,7 @@ EOF
       if $run eval "$command"; then :
       else
 	$run $rm $removelist
-	exit $EXIT_FAILURE
+	exit 1
       fi
 
       if test "$need_locks" = warn &&
@@ -838,7 +827,7 @@ avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
 	$run $rm $removelist
-	exit $EXIT_FAILURE
+	exit 1
       fi
 
       # Just move the object if needed
@@ -876,7 +865,7 @@ EOF
       $run $rm "$lockfile"
     fi
 
-    exit $EXIT_SUCCESS
+    exit 0
     ;;
 
   # libtool link mode
@@ -948,7 +937,52 @@ EOF
     vinfo=
     vinfo_number=no
 
-    func_infer_tag $base_compile
+    # Infer tagged configuration to use if any are available and
+    # if one wasn't chosen via the "--tag" command line option.
+    # Only attempt this if the compiler in the base link
+    # command doesn't match the default compiler.
+    if test -n "$available_tags" && test -z "$tagname"; then
+      case $base_compile in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+	    # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
+	    trimedcc="${CC/${host}-}"
+	    case $base_compile in
+	    "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*)
+	    tagname=CC
+	    break ;;
+	    "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*|\
+	    "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*)
+	      # The compiler in $compile_command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit 1
+#       else
+#         $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
 
     # We need to know -static, to get the right output filenames.
     for arg
@@ -1044,7 +1078,7 @@ EOF
 	  export_symbols="$arg"
 	  if test ! -f "$arg"; then
 	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	  prev=
 	  continue
@@ -1096,7 +1130,7 @@ EOF
 		   test "$pic_object" = none && \
 		   test "$non_pic_object" = none; then
 		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
+		  exit 1
 		fi
 
 		# Extract subdirectory from the argument.
@@ -1149,7 +1183,7 @@ EOF
 		# Only an error if not doing a dry-run.
 		if test -z "$run"; then
 		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
+		  exit 1
 		else
 		  # Dry-run case.
 
@@ -1170,7 +1204,7 @@ EOF
 	    done
 	  else
 	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	  arg=$save_arg
 	  prev=
@@ -1182,7 +1216,7 @@ EOF
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
 	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
@@ -1222,11 +1256,6 @@ EOF
 	  finalize_command="$finalize_command $qarg"
 	  continue
 	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
@@ -1275,7 +1304,7 @@ EOF
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
@@ -1311,7 +1340,7 @@ EOF
 	  absdir=`cd "$dir" && pwd`
 	  if test -z "$absdir"; then
 	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	  dir="$absdir"
 	  ;;
@@ -1462,7 +1491,7 @@ EOF
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
 	case "$xrpath " in
@@ -1548,6 +1577,11 @@ EOF
 	continue
 	;;
 
+      -Kthread | -mthreads | -mt | -pthread | -pthreads | -threads | -qthreaded | -kthread )
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
       # Some other compiler flag.
       -* | +*)
 	# Unknown arguments in both finalize_command and compile_command need
@@ -1585,7 +1619,7 @@ EOF
 	     test "$pic_object" = none && \
 	     test "$non_pic_object" = none; then
 	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 
 	  # Extract subdirectory from the argument.
@@ -1638,7 +1672,7 @@ EOF
 	  # Only an error if not doing a dry-run.
 	  if test -z "$run"; then
 	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  else
 	    # Dry-run case.
 
@@ -1705,7 +1739,7 @@ EOF
     if test -n "$prev"; then
       $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
@@ -1749,7 +1783,7 @@ EOF
     "")
       $echo "$modename: you must specify an output file" 1>&2
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
       ;;
     *.$libext) linkmode=oldlib ;;
     *.lo | *.$objext) linkmode=obj ;;
@@ -1759,7 +1793,7 @@ EOF
 
     case $host in
     *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
+      # don't eliminate duplcations in $postdeps and $predeps
       duplicate_compiler_generated_deps=yes
       ;;
     *)
@@ -1812,7 +1846,7 @@ EOF
 	  *.la) ;;
 	  *)
 	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	    ;;
 	  esac
 	done
@@ -1870,7 +1904,7 @@ EOF
 	  fi
 	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
 	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    for search_ext in .la $std_shrext .so .a; do
+	    for search_ext in .la $shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
 	      if test -f "$lib"; then
@@ -1946,11 +1980,11 @@ EOF
 	    fi
 	    if test "$pass" = scan; then
 	      deplibs="$deplib $deplibs"
+	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
 	    ;;
 	  *)
 	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
@@ -2029,14 +2063,14 @@ EOF
 	if test "$found" = yes || test -f "$lib"; then :
 	else
 	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	# Check to see that this really is a libtool archive.
 	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
@@ -2072,7 +2106,7 @@ EOF
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
 	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
+	      exit 1
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
@@ -2089,12 +2123,12 @@ EOF
 	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	  continue
 	fi # $pass = conv
 
-
+    
 	# Get the name of the library we link against.
 	linklib=
 	for l in $old_library $library_names; do
@@ -2102,18 +2136,16 @@ EOF
 	done
 	if test -z "$linklib"; then
 	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
 	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
+	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
@@ -2162,7 +2194,7 @@ EOF
 	if test "$pass" = dlpreopen; then
 	  if test -z "$libdir"; then
 	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
@@ -2189,7 +2221,7 @@ EOF
 	  continue
 	fi
 
-
+    
 	if test "$linkmode" = prog && test "$pass" != link; then
 	  newlib_search_path="$newlib_search_path $ladir"
 	  deplibs="$lib $deplibs"
@@ -2276,18 +2308,17 @@ EOF
 	    need_relink=yes
 	  fi
 	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	
+      # Warn about portability, can't link against -module's on some systems (darwin)
+      if test "$shouldnotlink" = yes && test "$pass" = link ; then
 	    $echo
 	    if test "$linkmode" = prog; then
 	      $echo "*** Warning: Linking the executable $output against the loadable module"
 	    else
 	      $echo "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    $echo "*** $linklib is not portable!"
-	  fi
+	    $echo "*** $linklib is not portable!"    
+      fi	  
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
 	    # Hardcode the library path.
@@ -2385,9 +2416,9 @@ EOF
 		case $host in
 		  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+		    # if the lib is a module then we can not link against it, someone
+		    # is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
 		      $echo "** Warning, lib $linklib is a module, not a shared library"
 		      if test -z "$old_library" ; then
 		        $echo
@@ -2395,7 +2426,7 @@ EOF
 		        $echo "** The link will probably fail, sorry"
 		      else
 		        add="$dir/$old_library"
-		      fi
+		      fi 
 		    fi
 		esac
 	      elif test "$hardcode_minus_L" = no; then
@@ -2437,7 +2468,7 @@ EOF
 
 	    if test "$lib_linked" != yes; then
 	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
+	      exit 1
 	    fi
 
 	    if test -n "$add_shlibpath"; then
@@ -2480,8 +2511,7 @@ EOF
 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	      if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
 	        add="$inst_prefix_dir$libdir/$linklib"
 	      else
 	        add="$libdir/$linklib"
@@ -2561,8 +2591,7 @@ EOF
 
 	if test "$linkmode" = lib; then
 	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
+	     { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
 	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
@@ -2619,7 +2648,7 @@ EOF
 		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  if test -z "$libdir"; then
 		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
+		    exit 1
 		  fi
 		  if test "$absdir" != "$libdir"; then
 		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
@@ -2629,8 +2658,7 @@ EOF
 		depdepl=
 		case $host in
 		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
+		  # we do not want to link against static libs, but need to link against shared
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
@@ -2638,7 +2666,7 @@ EOF
 		    done
 		    if test -f "$path/$depdepl" ; then
 		      depdepl="$path/$depdepl"
-		    fi
+		   fi
 		    # do not add paths which are already there
 		    case " $newlib_search_path " in
 		    *" $path "*) ;;
@@ -2648,32 +2676,33 @@ EOF
 		  path=""
 		  ;;
 		*)
-		  path="-L$path"
-		  ;;
-		esac
+		path="-L$path"
+		;;
+		esac 
+		
 		;;
-	      -l*)
+		  -l*)
 		case $host in
 		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
+		 # Again, we only want to link against shared libraries
+		 eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		 for tmp in $newlib_search_path ; do
+		     if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		       eval depdepl="$tmp/lib$tmp_libs.dylib"
+		       break
+		     fi  
+         done
+         path=""
 		  ;;
 		*) continue ;;
-		esac
+		esac  		  
 		;;
 	      *) continue ;;
 	      esac
 	      case " $deplibs " in
 	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
+	      *) deplibs="$deplibs $depdepl" ;;
+	      esac	      
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$deplibs $path" ;;
@@ -2763,8 +2792,7 @@ EOF
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
+      # Last step: remove runtime libs from dependency_libs (they stay in deplibs)
       tmp_libs=
       for i in $dependency_libs ; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
@@ -2824,19 +2852,19 @@ EOF
       case $outputname in
       lib*)
 	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval shared_ext=\"$shrext_cmds\"
+	eval shared_ext=\"$shrext\"
 	eval libname=\"$libname_spec\"
 	;;
       *)
 	if test "$module" = no; then
 	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
 	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
 	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval shared_ext=\"$shrext_cmds\"
+	  eval shared_ext=\"$shrext\"
 	  eval libname=\"$libname_spec\"
 	else
 	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
@@ -2847,7 +2875,7 @@ EOF
       if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
 	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
+	  exit 1
 	else
 	  $echo
 	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
@@ -2895,13 +2923,13 @@ EOF
 	if test -n "$8"; then
 	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
 	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
 	# to make the code below a bit more comprehensible
-
+	
 	case $vinfo_number in
 	yes)
 	  number_major="$2"
@@ -2945,7 +2973,7 @@ EOF
 	*)
 	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
 
@@ -2954,7 +2982,7 @@ EOF
 	*)
 	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
 
@@ -2963,14 +2991,14 @@ EOF
 	*)
 	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
 	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	# Calculate the version variables.
@@ -3059,7 +3087,7 @@ EOF
 	*)
 	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
 	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
 
@@ -3113,11 +3141,9 @@ EOF
 	    *.$objext)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
-		   continue
-		 fi
+	       if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	       then
+		 continue
 	       fi
 	       removelist="$removelist $p"
 	       ;;
@@ -3366,6 +3392,13 @@ EOF
 			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
+		      # It is ok to link against an archive when
+		      # building a shared library.
+		      if $AR -t $potlib > /dev/null 2>&1; then
+		        newdeplibs="$newdeplibs $a_deplib"
+		        a_deplib=""
+		        break 2
+		      fi
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
 			 | ${SED} 10q \
 			 | $EGREP "$file_magic_regex" > /dev/null; then
@@ -3598,7 +3631,7 @@ EOF
 	fi
 
 	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
+	eval shared_ext=\"$shrext\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	realname="$2"
@@ -3662,12 +3695,12 @@ EOF
 	for test_deplib in $deplibs; do
 		case " $convenience " in
 		*" $test_deplib "*) ;;
-		*)
+		*) 
 			tmp_deplibs="$tmp_deplibs $test_deplib"
 			;;
 		esac
 	done
-	deplibs="$tmp_deplibs"
+	deplibs="$tmp_deplibs" 
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
@@ -3850,6 +3883,7 @@ EOF
 	  save_ifs="$IFS"; IFS='~'
 	  for cmd in $concat_cmds; do
 	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
 	    $show "$cmd"
 	    $run eval "$cmd" || exit $?
 	  done
@@ -3896,7 +3930,7 @@ EOF
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
 	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-	  exit $EXIT_SUCCESS
+	  exit 0
 	fi
 
 	# Create links to the real library.
@@ -3944,7 +3978,7 @@ EOF
       *.lo)
 	if test -n "$objs$old_deplibs"; then
 	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 	libobj="$output"
 	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
@@ -4055,7 +4089,7 @@ EOF
 	  $run ${rm}r $gentop
 	fi
 
-	exit $EXIT_SUCCESS
+	exit 0
       fi
 
       if test "$build_libtool_libs" != yes; then
@@ -4068,7 +4102,7 @@ EOF
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"
 	# $run eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
+	exit 0
       fi
 
       if test -n "$pic_flag" || test "$pic_mode" != default; then
@@ -4091,7 +4125,7 @@ EOF
 	$run ${rm}r $gentop
       fi
 
-      exit $EXIT_SUCCESS
+      exit 0
       ;;
 
     prog)
@@ -4409,7 +4443,7 @@ static const void *lt_preloaded_setup() {
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
       else
@@ -4497,7 +4531,7 @@ static const void *lt_preloaded_setup() {
 	# Link the executable and exit
 	$show "$link_command"
 	$run eval "$link_command" || exit $?
-	exit $EXIT_SUCCESS
+	exit 0
       fi
 
       if test "$hardcode_action" = relink; then
@@ -4552,10 +4586,10 @@ static const void *lt_preloaded_setup() {
       fi
 
       # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case $0 in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
 	esac
 	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
       else
@@ -4581,7 +4615,7 @@ static const void *lt_preloaded_setup() {
 	    cwrappersource=`$echo ${objdir}/lt-${output}.c`
 	    cwrapper=`$echo ${output}.exe`
 	    $rm $cwrappersource $cwrapper
-	    trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+	    trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
 
 	    cat > $cwrappersource <<EOF
 
@@ -4590,7 +4624,7 @@ static const void *lt_preloaded_setup() {
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
-
+   
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
 
@@ -4622,7 +4656,7 @@ EOF
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
 #define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
+#ifndef DIR_SEPARATOR_2 
 #define DIR_SEPARATOR_2 '\\'
 #endif
 #endif
@@ -4653,7 +4687,7 @@ main (int argc, char *argv[])
 {
   char **newargz;
   int i;
-
+  
   program_name = (char *) xstrdup ((char *) basename (argv[0]));
   newargz = XMALLOC(char *, argc+2);
 EOF
@@ -4666,7 +4700,7 @@ EOF
   newargz[1] = fnqualify(argv[0]);
   /* we know the script has the same name, without the .exe */
   /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
+  strendzap(newargz[1],".exe"); 
   for (i = 1; i < argc; i++)
     newargz[i+1] = xstrdup(argv[i]);
   newargz[argc+1] = NULL;
@@ -4689,7 +4723,7 @@ xmalloc (size_t num)
   return p;
 }
 
-char *
+char * 
 xstrdup (const char *string)
 {
   return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
@@ -4703,7 +4737,7 @@ basename (const char *name)
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha (name[0]) && name[1] == ':')
+  if (isalpha (name[0]) && name[1] == ':') 
     name += 2;
 #endif
 
@@ -4713,7 +4747,7 @@ basename (const char *name)
   return (char *) base;
 }
 
-char *
+char * 
 fnqualify(const char *path)
 {
   size_t size;
@@ -4741,7 +4775,7 @@ fnqualify(const char *path)
 }
 
 char *
-strendzap(char *str, const char *pat)
+strendzap(char *str, const char *pat) 
 {
   size_t len, patlen;
 
@@ -4761,7 +4795,7 @@ strendzap(char *str, const char *pat)
 }
 
 static void
-lt_error_core (int exit_status, const char * mode,
+lt_error_core (int exit_status, const char * mode, 
           const char * message, va_list ap)
 {
   fprintf (stderr, "%s: %s: ", program_name, mode);
@@ -4790,7 +4824,7 @@ EOF
 	  ;;
 	esac
 	$rm $output
-	trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+	trap "$rm $output; exit 1" 1 2 15
 
 	$echo > $output "\
 #! $SHELL
@@ -4890,7 +4924,7 @@ else
       else
 	$echo \"\$relink_command_output\" >&2
 	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
+	exit 1
       fi
     fi
 
@@ -4952,20 +4986,20 @@ else
 	esac
 	$echo >> $output "\
       \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit $EXIT_FAILURE
+      exit 1
     fi
   else
     # The program doesn't exist.
     \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
     \$echo \"This script is just a wrapper for \$program.\" 1>&2
     $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
+    exit 1
   fi
 fi\
 "
 	chmod +x $output
       fi
-      exit $EXIT_SUCCESS
+      exit 0
       ;;
     esac
 
@@ -5084,7 +5118,7 @@ fi\
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
-	  done
+	  done  
 	  for obj in $save_oldobjs
 	  do
 	    oldobjs="$objlist $obj"
@@ -5098,7 +5132,7 @@ fi\
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then
 	        RANLIB=$save_RANLIB
-	      fi
+	      fi  
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
@@ -5147,13 +5181,11 @@ fi\
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command="(cd `pwd`; $SHELL $0 $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
       relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-
+        relink_command=
+      fi  
       # Only create the output if not a dry run.
       if test -z "$run"; then
 	for installed in no yes; do
@@ -5171,11 +5203,48 @@ fi\
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		if test -z "$libdir"; then
 		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
+		  exit 1
+		fi
+		# We do not want portage's install root ($D) present.  Check only for
+		# this if the .la is being installed.
+		if test "$installed" = yes && test "$D"; then
+		  eval mynewdependency_lib="`echo "$libdir/$name" |sed -e "s:$D::g" -e 's://:/:g'`"
+		else
+		  mynewdependency_lib="$libdir/$name"
+		fi
+		# Do not add duplicates
+		if test "$mynewdependency_lib"; then
+		  if test -z "`echo $newdependency_libs |grep -e "$mynewdependency_lib"`"; then
+		    newdependency_libs="$newdependency_libs $mynewdependency_lib"
+		  fi
+		fi
+		;;
+		  *)
+		if test "$installed" = yes; then
+   	  # Rather use S=WORKDIR if our version of portage supports it.
+   	  # This is because some ebuild (gcc) do not use $S as buildroot.
+		  if test "$PWORKDIR"; then
+		    S="$PWORKDIR"
+		  fi
+		  # We do not want portage's build root ($S) present.
+		  if test -n "`echo $deplib |grep -e "$S"`" && test "$S"; then
+		    mynewdependency_lib=""
+		  # We do not want portage's install root ($D) present.
+		  elif test -n "`echo $deplib |grep -e "$D"`" && test "$D"; then
+		    eval mynewdependency_lib="`echo "$deplib" |sed -e "s:$D::g" -e 's://:/:g'`"
+		  else
+		    mynewdependency_lib="$deplib"
+		  fi
+		else
+		  mynewdependency_lib="$deplib"
+		fi
+		# Do not add duplicates
+		if test "$mynewdependency_lib"; then
+		  if test -z "`echo $newdependency_libs |grep -e "$mynewdependency_lib"`"; then
+			newdependency_libs="$newdependency_libs $mynewdependency_lib"
+		  fi
 		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
 	      esac
 	    done
 	    dependency_libs="$newdependency_libs"
@@ -5185,7 +5254,7 @@ fi\
 	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 	      if test -z "$libdir"; then
 		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
+		exit 1
 	      fi
 	      newdlfiles="$newdlfiles $libdir/$name"
 	    done
@@ -5196,7 +5265,7 @@ fi\
 	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 	      if test -z "$libdir"; then
 		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
+		exit 1
 	      fi
 	      newdlprefiles="$newdlprefiles $libdir/$name"
 	    done
@@ -5204,7 +5273,7 @@ fi\
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
-	      case $lib in
+	      case $lib in 
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
@@ -5213,7 +5282,7 @@ fi\
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
-	      case $lib in
+	      case $lib in 
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
@@ -5227,6 +5296,10 @@ fi\
 	  case $host,$output,$installed,$module,$dlname in
 	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
+	  # Do not add duplicates
+	  if test "$installed" = yes && test "$D"; then
+	    install_libdir="`echo "$install_libdir" |sed -e "s:$D::g" -e 's://:/:g'`"
+	  fi
 	  $echo > $output "\
 # $outputname - a libtool library file
 # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
@@ -5276,7 +5349,7 @@ relink_command=\"$relink_command\""
       $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
       ;;
     esac
-    exit $EXIT_SUCCESS
+    exit 0
     ;;
 
   # libtool install mode
@@ -5365,13 +5438,13 @@ relink_command=\"$relink_command\""
     if test -z "$install_prog"; then
       $echo "$modename: you must specify an install program" 1>&2
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     if test -n "$prev"; then
       $echo "$modename: the \`$prev' option requires an argument" 1>&2
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     if test -z "$files"; then
@@ -5381,7 +5454,7 @@ relink_command=\"$relink_command\""
 	$echo "$modename: you must specify a destination" 1>&2
       fi
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     # Strip any trailing slash from the destination.
@@ -5402,7 +5475,7 @@ relink_command=\"$relink_command\""
       if test "$#" -gt 2; then
 	$echo "$modename: \`$dest' is not a directory" 1>&2
 	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
+	exit 1
       fi
     fi
     case $destdir in
@@ -5414,7 +5487,7 @@ relink_command=\"$relink_command\""
 	*)
 	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
 	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
       done
@@ -5443,7 +5516,7 @@ relink_command=\"$relink_command\""
 	else
 	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	library_names=
@@ -5485,7 +5558,7 @@ relink_command=\"$relink_command\""
 	  # but it's something to keep an eye on.
 	  if test "$inst_prefix_dir" = "$destdir"; then
 	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 
 	  if test -n "$inst_prefix_dir"; then
@@ -5500,7 +5573,7 @@ relink_command=\"$relink_command\""
 	  if $run eval "$relink_command"; then :
 	  else
 	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 	fi
 
@@ -5579,7 +5652,7 @@ relink_command=\"$relink_command\""
 	*)
 	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
 	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	  ;;
 	esac
 
@@ -5597,7 +5670,7 @@ relink_command=\"$relink_command\""
 	  $show "$install_prog $staticobj $staticdest"
 	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
 	fi
-	exit $EXIT_SUCCESS
+	exit 0
 	;;
 
       *)
@@ -5651,7 +5724,7 @@ relink_command=\"$relink_command\""
 	  # Check the variables that should have been set.
 	  if test -z "$notinst_deplibs"; then
 	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
+	    exit 1
 	  fi
 
 	  finalize=yes
@@ -5692,12 +5765,8 @@ relink_command=\"$relink_command\""
 	      tmpdir="/tmp"
 	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
 	      tmpdir="$tmpdir/libtool-$$"
-	      save_umask=`umask`
-	      umask 0077
-	      if $mkdir "$tmpdir"; then
-	        umask $save_umask
+	      if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then :
 	      else
-	        umask $save_umask
 		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
 		continue
 	      fi
@@ -5780,9 +5849,9 @@ relink_command=\"$relink_command\""
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+      exec_cmd='$SHELL $0 $preserve_args --finish$current_libdirs'
     else
-      exit $EXIT_SUCCESS
+      exit 0
     fi
     ;;
 
@@ -5822,7 +5891,7 @@ relink_command=\"$relink_command\""
     fi
 
     # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
+    test "$show" = : && exit 0
 
     $echo "----------------------------------------------------------------------"
     $echo "Libraries have been installed in:"
@@ -5858,7 +5927,7 @@ relink_command=\"$relink_command\""
     $echo "See any operating system documentation about shared libraries for"
     $echo "more information, such as the ld(1) and ld.so(8) manual pages."
     $echo "----------------------------------------------------------------------"
-    exit $EXIT_SUCCESS
+    exit 0
     ;;
 
   # libtool execute mode
@@ -5870,7 +5939,7 @@ relink_command=\"$relink_command\""
     if test -z "$cmd"; then
       $echo "$modename: you must specify a COMMAND" 1>&2
       $echo "$help"
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     # Handle -dlopen flags immediately.
@@ -5878,7 +5947,7 @@ relink_command=\"$relink_command\""
       if test ! -f "$file"; then
 	$echo "$modename: \`$file' is not a file" 1>&2
 	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
+	exit 1
       fi
 
       dir=
@@ -5889,7 +5958,7 @@ relink_command=\"$relink_command\""
 	else
 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
 	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 
 	# Read the libtool library.
@@ -5916,7 +5985,7 @@ relink_command=\"$relink_command\""
 	  dir="$dir/$objdir"
 	else
 	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit $EXIT_FAILURE
+	  exit 1
 	fi
 	;;
 
@@ -5996,7 +6065,7 @@ relink_command=\"$relink_command\""
 	$echo "export $shlibpath_var"
       fi
       $echo "$cmd$args"
-      exit $EXIT_SUCCESS
+      exit 0
     fi
     ;;
 
@@ -6024,7 +6093,7 @@ relink_command=\"$relink_command\""
     if test -z "$rm"; then
       $echo "$modename: you must specify an RM program" 1>&2
       $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+      exit 1
     fi
 
     rmdirs=
@@ -6138,7 +6207,7 @@ relink_command=\"$relink_command\""
 	if test "$mode" = clean ; then
 	  noexename=$name
 	  case $file in
-	  *.exe)
+	  *.exe) 
 	    file=`$echo $file|${SED} 's,.exe$,,'`
 	    noexename=`$echo $name|${SED} 's,.exe$,,'`
 	    # $file with .exe has already been added to rmfiles,
@@ -6183,20 +6252,20 @@ relink_command=\"$relink_command\""
   "")
     $echo "$modename: you must specify a MODE" 1>&2
     $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
+    exit 1
     ;;
   esac
 
   if test -z "$exec_cmd"; then
     $echo "$modename: invalid operation mode \`$mode'" 1>&2
     $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
+    exit 1
   fi
 fi # test -z "$show_help"
 
 if test -n "$exec_cmd"; then
   eval exec $exec_cmd
-  exit $EXIT_FAILURE
+  exit 1
 fi
 
 # We need to display help for each of the modes.
@@ -6232,7 +6301,7 @@ MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
 a more detailed description of MODE.
 
 Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
+  exit 0
   ;;
 
 clean)
@@ -6387,14 +6456,14 @@ Otherwise, only FILE itself is deleted using RM."
 *)
   $echo "$modename: invalid operation mode \`$mode'" 1>&2
   $echo "$help" 1>&2
-  exit $EXIT_FAILURE
+  exit 1
   ;;
 esac
 
 $echo
 $echo "Try \`$modename --help' for more information about other modes."
 
-exit $EXIT_SUCCESS
+exit 0
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
diff --git a/missing b/missing
index 64b5f90..e7ef83a 100755
--- a/missing
+++ b/missing
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2004-09-07.08
+scriptversion=2003-09-02.23
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
@@ -60,6 +60,11 @@ case "$1" in
     msg="probably too old"
   fi
   ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -87,12 +92,10 @@ Supported PROGRAM values:
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
 Send bug reports to <bug-automake@gnu.org>."
-    exit 0
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
     echo "missing $scriptversion (GNU Automake)"
-    exit 0
     ;;
 
   -*)
@@ -101,42 +104,12 @@ Send bug reports to <bug-automake@gnu.org>."
     exit 1
     ;;
 
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
+  aclocal*)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
        exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
     fi
-    ;;
-esac
 
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-  aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
@@ -146,6 +119,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -155,6 +133,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -174,6 +157,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
@@ -185,6 +173,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -261,6 +254,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
@@ -281,6 +279,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     ;;
 
   makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -298,6 +301,10 @@ WARNING: \`$1' is $msg.  You should only need it if
 
   tar)
     shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
 
     # We have already tried tar in the generic part.
     # Look for gnutar/gtar before invocation to avoid ugly error
diff --git a/src/Makefile.in b/src/Makefile.in
index 3bf10e5..33c402d 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.9.2 from Makefile.am.
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -37,7 +37,6 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-build_triplet = @build@
 host_triplet = @host@
 bin_PROGRAMS = xfce4-appfinder$(EXEEXT)
 subdir = src
@@ -52,8 +51,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appsdir)" \
-	"$(DESTDIR)$(icondir)"
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appsdir)" "$(DESTDIR)$(icondir)"
 binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_xfce4_appfinder_OBJECTS = xfce4_appfinder-callbacks.$(OBJEXT) \
@@ -63,22 +61,18 @@ xfce4_appfinder_DEPENDENCIES =
 DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/xfce4_appfinder-callbacks.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/xfce4_appfinder-main.Po
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 SOURCES = $(xfce4_appfinder_SOURCES)
 DIST_SOURCES = $(xfce4_appfinder_SOURCES)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 appsDATA_INSTALL = $(INSTALL_DATA)
 iconDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(apps_DATA) $(icon_DATA)
@@ -174,8 +168,6 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -307,51 +299,74 @@ distclean-compile:
 @am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 xfce4_appfinder-callbacks.o: callbacks.c
 @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -MT xfce4_appfinder-callbacks.o -MD -MP -MF "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo" -c -o xfce4_appfinder-callbacks.o `test -f 'callbacks.c' || echo '$(srcdir)/'`callbacks.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo" "$(DEPDIR)/xfce4_appfinder-callbacks.Po"; else rm -f "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='callbacks.c' object='xfce4_appfinder-callbacks.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/xfce4_appfinder-callbacks.Po' tmpdepfile='$(DEPDIR)/xfce4_appfinder-callbacks.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -c -o xfce4_appfinder-callbacks.o `test -f 'callbacks.c' || echo '$(srcdir)/'`callbacks.c
 
 xfce4_appfinder-callbacks.obj: callbacks.c
 @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -MT xfce4_appfinder-callbacks.obj -MD -MP -MF "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo" -c -o xfce4_appfinder-callbacks.obj `if test -f 'callbacks.c'; then $(CYGPATH_W) 'callbacks.c'; else $(CYGPATH_W) '$(srcdir)/callbacks.c'; fi`; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo" "$(DEPDIR)/xfce4_appfinder-callbacks.Po"; else rm -f "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='callbacks.c' object='xfce4_appfinder-callbacks.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/xfce4_appfinder-callbacks.Po' tmpdepfile='$(DEPDIR)/xfce4_appfinder-callbacks.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -c -o xfce4_appfinder-callbacks.obj `if test -f 'callbacks.c'; then $(CYGPATH_W) 'callbacks.c'; else $(CYGPATH_W) '$(srcdir)/callbacks.c'; fi`
 
+xfce4_appfinder-callbacks.lo: callbacks.c
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -MT xfce4_appfinder-callbacks.lo -MD -MP -MF "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo" -c -o xfce4_appfinder-callbacks.lo `test -f 'callbacks.c' || echo '$(srcdir)/'`callbacks.c; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo" "$(DEPDIR)/xfce4_appfinder-callbacks.Plo"; else rm -f "$(DEPDIR)/xfce4_appfinder-callbacks.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='callbacks.c' object='xfce4_appfinder-callbacks.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/xfce4_appfinder-callbacks.Plo' tmpdepfile='$(DEPDIR)/xfce4_appfinder-callbacks.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -c -o xfce4_appfinder-callbacks.lo `test -f 'callbacks.c' || echo '$(srcdir)/'`callbacks.c
+
 xfce4_appfinder-main.o: main.c
 @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -MT xfce4_appfinder-main.o -MD -MP -MF "$(DEPDIR)/xfce4_appfinder-main.Tpo" -c -o xfce4_appfinder-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/xfce4_appfinder-main.Tpo" "$(DEPDIR)/xfce4_appfinder-main.Po"; else rm -f "$(DEPDIR)/xfce4_appfinder-main.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='main.c' object='xfce4_appfinder-main.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/xfce4_appfinder-main.Po' tmpdepfile='$(DEPDIR)/xfce4_appfinder-main.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -c -o xfce4_appfinder-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c
 
 xfce4_appfinder-main.obj: main.c
 @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -MT xfce4_appfinder-main.obj -MD -MP -MF "$(DEPDIR)/xfce4_appfinder-main.Tpo" -c -o xfce4_appfinder-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/xfce4_appfinder-main.Tpo" "$(DEPDIR)/xfce4_appfinder-main.Po"; else rm -f "$(DEPDIR)/xfce4_appfinder-main.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='main.c' object='xfce4_appfinder-main.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/xfce4_appfinder-main.Po' tmpdepfile='$(DEPDIR)/xfce4_appfinder-main.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -c -o xfce4_appfinder-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`
 
+xfce4_appfinder-main.lo: main.c
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -MT xfce4_appfinder-main.lo -MD -MP -MF "$(DEPDIR)/xfce4_appfinder-main.Tpo" -c -o xfce4_appfinder-main.lo `test -f 'main.c' || echo '$(srcdir)/'`main.c; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/xfce4_appfinder-main.Tpo" "$(DEPDIR)/xfce4_appfinder-main.Plo"; else rm -f "$(DEPDIR)/xfce4_appfinder-main.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='main.c' object='xfce4_appfinder-main.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/xfce4_appfinder-main.Plo' tmpdepfile='$(DEPDIR)/xfce4_appfinder-main.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfce4_appfinder_CFLAGS) $(CFLAGS) -c -o xfce4_appfinder-main.lo `test -f 'main.c' || echo '$(srcdir)/'`main.c
+
 mostlyclean-libtool:
 	-rm -f *.lo
 
@@ -366,7 +381,7 @@ install-appsDATA: $(apps_DATA)
 	test -z "$(appsdir)" || $(mkdir_p) "$(DESTDIR)$(appsdir)"
 	@list='$(apps_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
 	  echo " $(appsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appsdir)/$$f'"; \
 	  $(appsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appsdir)/$$f"; \
 	done
@@ -374,7 +389,7 @@ install-appsDATA: $(apps_DATA)
 uninstall-appsDATA:
 	@$(NORMAL_UNINSTALL)
 	@list='$(apps_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
 	  echo " rm -f '$(DESTDIR)$(appsdir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(appsdir)/$$f"; \
 	done
@@ -383,7 +398,7 @@ install-iconDATA: $(icon_DATA)
 	test -z "$(icondir)" || $(mkdir_p) "$(DESTDIR)$(icondir)"
 	@list='$(icon_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
 	  echo " $(iconDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(icondir)/$$f'"; \
 	  $(iconDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(icondir)/$$f"; \
 	done
@@ -391,7 +406,7 @@ install-iconDATA: $(icon_DATA)
 uninstall-iconDATA:
 	@$(NORMAL_UNINSTALL)
 	@list='$(icon_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
 	  echo " rm -f '$(DESTDIR)$(icondir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(icondir)/$$f"; \
 	done
@@ -497,7 +512,7 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
diff --git a/src/main.c b/src/main.c
index 33a3b14..b595ca0 100755
--- a/src/main.c
+++ b/src/main.c
@@ -506,7 +506,7 @@ build_paths (void)
     applnk = xfce_resource_lookup_all (XFCE_RESOURCE_DATA, "applnk/");
     for (napplnk = 0; applnk[napplnk] != NULL; ++napplnk);
     
-    entriespaths = g_new0 (gchar *, 2 * napplications + napps + napplnk + 4);
+    entriespaths = g_new0 (gchar *, 2 * napplications + napps + napplnk + 6);
     i = 0;
     
     entriespaths[i++] = xfce_get_homefile (".kde", "share", "apps", NULL);
@@ -515,6 +515,12 @@ build_paths (void)
     {
         entriespaths[i++] = g_build_filename (kdedir, "share",  "applications",  "kde", NULL); 
     }
+
+    /* FreeBSD Gnome stuff */
+    entriespaths[i++] = g_build_filename ("/usr", "X11R6", "share", "gnome", "applications", NULL);
+
+    /* /usr/global stuff */
+    entriespaths[i++] = g_build_filename ("/usr", "global", "share", "applications", NULL);
     
     for (n = 0; n < napplications; ++n)
     {