summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README_src.txt2
-rw-r--r--runtime/doc/ada.txt6
-rw-r--r--runtime/doc/remote.txt2
-rw-r--r--runtime/doc/syntax.txt45
-rw-r--r--runtime/doc/usr_30.txt2
-rw-r--r--runtime/indent/config.vim13
-rw-r--r--runtime/indent/xf86conf.vim7
-rw-r--r--runtime/syntax/context.vim7
-rw-r--r--runtime/syntax/rst.vim10
-rw-r--r--src/farsi.c4
-rw-r--r--src/farsi.h2
-rw-r--r--src/fold.c8
-rw-r--r--src/misc1.c14
13 files changed, 69 insertions, 53 deletions
diff --git a/README_src.txt b/README_src.txt
index 3ff3e2282..83cdf4721 100644
--- a/README_src.txt
+++ b/README_src.txt
@@ -1,4 +1,4 @@
-README_src.txt for version 7.1a of Vim: Vi IMproved.
+README_src.txt for version 7.1b of Vim: Vi IMproved.
The source archive contains the files needed to compile Vim on Unix systems.
It is packed for Unix systems (NL line separator). It is also used for other
diff --git a/runtime/doc/ada.txt b/runtime/doc/ada.txt
index 4367ae012..bdbe97e98 100644
--- a/runtime/doc/ada.txt
+++ b/runtime/doc/ada.txt
@@ -1,4 +1,4 @@
-*ada.txt* For Vim version 7.1a. Last change: 2006 Nov 12
+*ada.txt* For Vim version 7.1b. Last change: 2007 May 08
ADA FILE TYPE PLUG-INS REFERENCE MANUAL~
@@ -125,7 +125,7 @@ NOTE: "gnat xref -v" is very tricky to use as it has almost no diagnostic
3.2 Omni Completion with "ctags"~
*ada-ctags*
-Exuberant Ctags uses it's own multi-language code parser. The parser is quite
+Exuberant Ctags uses its own multi-language code parser. The parser is quite
fast, produces a lot of extra informations (hence the name "Exuberant Ctags")
and can run on files which currently do not compile.
@@ -302,7 +302,7 @@ g:ada_folding set ('sigpft')
'x': lone 'exception' folded with line above
'i': activate indent folding on load
- Note: Syntax folding is in an early (unuseable) stage and
+ Note: Syntax folding is in an early (unusable) stage and
indent or gnat pretty folding is suggested.
For gnat pretty folding to work the following settings are
diff --git a/runtime/doc/remote.txt b/runtime/doc/remote.txt
index 5b87cc0e0..4015c9137 100644
--- a/runtime/doc/remote.txt
+++ b/runtime/doc/remote.txt
@@ -1,4 +1,4 @@
-*remote.txt* For Vim version 7.1a. Last change: 2006 Apr 30
+*remote.txt* For Vim version 7.1b. Last change: 2006 Apr 30
VIM REFERENCE MANUAL by Bram Moolenaar
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index 372b7a9fc..e15793086 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt* For Vim version 7.1a. Last change: 2007 May 03
+*syntax.txt* For Vim version 7.1b. Last change: 2007 May 07
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -854,15 +854,16 @@ Doxygen generates code documentation using a special documentation format
(similar to Javadoc). This syntax script adds doxygen highlighting to c, cpp
and idl files, and should also work with java.
-There are a few of ways to turn on doxygen formatting. It can be done explicity
-or in a modeline by appending '.doxygen' to the syntax of the file. Example: >
+There are a few of ways to turn on doxygen formatting. It can be done
+explicitly or in a modeline by appending '.doxygen' to the syntax of the file.
+Example: >
:set syntax=c.doxygen
or >
// vim:syntax=c.doxygen
-It can also be done automaticly for c, cpp and idl files by setting the global
-or buffer-local variable load_doxygen_syntax. This is done by adding the
-following to your .vimrc. >
+It can also be done automatically for c, cpp and idl files by setting the
+global or buffer-local variable load_doxygen_syntax. This is done by adding
+the following to your .vimrc. >
:let g:load_doxygen_syntax=1
There are a couple of variables that have an affect on syntax highlighting, and
@@ -1291,7 +1292,7 @@ are recognized by the html.vim syntax coloring file and change the way normal
text is shown: <B> <I> <U> <EM> <STRONG> (<EM> is used as an alias for <I>,
while <STRONG> as an alias for <B>), <H1> - <H6>, <HEAD>, <TITLE> and <A>, but
only if used as a link (that is, it must include a href as in
-<A href="somfile.html">).
+<A href="somefile.html">).
If you want to change how such text is rendered, you must redefine the
following syntax groups:
@@ -1408,7 +1409,7 @@ Microsoft land, this is also used for defining COM interfaces and calls.
IDL's structure is simple enough to permit a full grammar based approach to
rather than using a few heuristics. The result is large and somewhat
-repetative but seems to work.
+repetitive but seems to work.
There are some Microsoft extensions to idl files that are here. Some of them
are disabled by defining idl_no_ms_extensions.
@@ -2248,7 +2249,7 @@ experience slow redrawing (or you are on a terminal with poor color support)
you may want to turn it off by defining the "ruby_no_expensive" variable: >
:let ruby_no_expensive = 1
-
+<
In this case the same color will be used for all control keywords.
If you do want this feature enabled, but notice highlighting errors while
@@ -2256,15 +2257,15 @@ scrolling backwards, which are fixed when redrawing with CTRL-L, try setting
the "ruby_minlines" variable to a value larger than 50: >
:let ruby_minlines = 100
-
+<
Ideally, this value should be a number of lines large enough to embrace your
largest class or module.
-Highlighting of special identifiers can be disabled by defining
-"ruby_no_identifiers": >
-
- :let ruby_no_identifiers = 1
+Highlighting of special identifiers can be disabled by removing the
+rubyIdentifier highlighting: >
+ :hi link rubyIdentifier NONE
+<
This will prevent highlighting of special identifiers like "ConstantName",
"$global_var", "@@class_var", "@instance_var", "| block_param |", and
":symbol".
@@ -2273,14 +2274,19 @@ Significant methods of Kernel, Module and Object are highlighted by default.
This can be disabled by defining "ruby_no_special_methods": >
:let ruby_no_special_methods = 1
-
+<
This will prevent highlighting of important methods such as "require", "attr",
"private", "raise" and "proc".
+Ruby operators can be highlighted. This is enabled by defining
+"ruby_operators": >
+
+ :let ruby_operators = 1
+<
Whitespace errors can be highlighted by defining "ruby_space_errors": >
:let ruby_space_errors = 1
-
+<
This will highlight trailing whitespace and tabs preceded by a space character
as errors. This can be refined by defining "ruby_no_trail_space_error" and
"ruby_no_tab_space_error" which will ignore trailing whitespace and tabs after
@@ -2289,10 +2295,15 @@ spaces respectively.
Folding can be enabled by defining "ruby_fold": >
:let ruby_fold = 1
-
+<
This will set the 'foldmethod' option to "syntax" and allow folding of
classes, modules, methods, code blocks, heredocs and comments.
+Folding of multiline comments can be disabled by defining
+"ruby_no_comment_fold": >
+
+ :let ruby_no_comment_fold = 1
+<
SCHEME *scheme.vim* *ft-scheme-syntax*
diff --git a/runtime/doc/usr_30.txt b/runtime/doc/usr_30.txt
index ca8cbab39..080365b30 100644
--- a/runtime/doc/usr_30.txt
+++ b/runtime/doc/usr_30.txt
@@ -1,4 +1,4 @@
-*usr_30.txt* For Vim version 7.1a. Last change: 2007 Apr 22
+*usr_30.txt* For Vim version 7.1b. Last change: 2007 Apr 22
VIM USER MANUAL - by Bram Moolenaar
diff --git a/runtime/indent/config.vim b/runtime/indent/config.vim
index 77b4ebf1e..7eb165757 100644
--- a/runtime/indent/config.vim
+++ b/runtime/indent/config.vim
@@ -1,19 +1,20 @@
" Vim indent file
-" Language: Autoconf configure.{ac,in} file
-" Maintainer: Nikolai Weibull <now@bitwi.se>
-" Latest Revision: 2006-04-19
-" TODO: how about nested [()]'s in one line
-" what's wrong with '\\\@!'?
+" Language: Autoconf configure.{ac,in} file
+" Maintainer: Nikolai Weibull <now@bitwi.se>
+" Latest Revision: 2006-12-20
+" TODO: how about nested [()]'s in one line
+" what's wrong with '\\\@!'?
" Only load this indent file when no other was loaded.
if exists("b:did_indent")
finish
endif
-runtime! indent/sh.vim " will set b:did_indent
+runtime! indent/sh.vim " will set b:did_indent
setlocal indentexpr=GetConfigIndent()
setlocal indentkeys=!^F,o,O,=then,=do,=else,=elif,=esac,=fi,=fin,=fil,=done
+setlocal nosmartindent
" Only define the function once.
if exists("*GetConfigIndent")
diff --git a/runtime/indent/xf86conf.vim b/runtime/indent/xf86conf.vim
index 04f54c904..4174a2422 100644
--- a/runtime/indent/xf86conf.vim
+++ b/runtime/indent/xf86conf.vim
@@ -1,7 +1,7 @@
" Vim indent file
-" Language: XFree86 Configuration File
+" Language: XFree86 Configuration File
" Maintainer: Nikolai Weibull <now@bitwi.se>
-" Latest Revision: 2006-04-19
+" Latest Revision: 2006-12-20
if exists("b:did_indent")
finish
@@ -10,6 +10,7 @@ let b:did_indent = 1
setlocal indentexpr=GetXF86ConfIndent()
setlocal indentkeys=!^F,o,O,=End
+setlocal nosmartindent
if exists("*GetXF86ConfIndent")
finish
@@ -28,7 +29,7 @@ function GetXF86ConfIndent()
let ind = ind + &sw
endif
- if getline(v:lnum) =~? '^\s*End\>'
+ if getline(v:lnum) =~? '^\s*End\(Sub\)\=Section\>'
let ind = ind - &sw
endif
diff --git a/runtime/syntax/context.vim b/runtime/syntax/context.vim
index 93b14b194..225cc6efc 100644
--- a/runtime/syntax/context.vim
+++ b/runtime/syntax/context.vim
@@ -1,13 +1,14 @@
" Vim syntax file
" Language: ConTeXt typesetting engine
" Maintainer: Nikolai Weibull <now@bitwi.se>
-" Latest Revision: 2006-04-19
+" Latest Revision: 2006-08-10
if exists("b:current_syntax")
finish
endif
runtime! syntax/plaintex.vim
+unlet b:current_syntax
let s:cpo_save = &cpo
set cpo&vim
@@ -16,6 +17,8 @@ if !exists('g:context_include')
let g:context_include = ['mp', 'javascript', 'xml']
endif
+syn spell toplevel
+
syn match contextBlockDelim display '\\\%(start\|stop\)\a\+'
\ contains=@NoSpell
@@ -27,7 +30,7 @@ syn region contextEscaped display matchgroup=contextPreProc
\ start='\\type\=<<' end='>>'
syn region contextEscaped matchgroup=contextPreProc
\ start='\\start\z(\a*\%(typing\|typen\)\)'
- \ end='\\stop\z1'
+ \ end='\\stop\z1' contains=plaintexComment keepend
syn region contextEscaped display matchgroup=contextPreProc
\ start='\\\h\+Type{' end='}'
syn region contextEscaped display matchgroup=contextPreProc
diff --git a/runtime/syntax/rst.vim b/runtime/syntax/rst.vim
index 6e24251ff..d5a76a2b6 100644
--- a/runtime/syntax/rst.vim
+++ b/runtime/syntax/rst.vim
@@ -1,7 +1,7 @@
" Vim syntax file
" Language: reStructuredText documentation format
" Maintainer: Nikolai Weibull <now@bitwi.se>
-" Latest Revision: 2006-04-09
+" Latest Revision: 2006-07-04
if exists("b:current_syntax")
finish
@@ -50,7 +50,7 @@ syn match rstSimpleTableLines contained display
syn cluster rstDirectives contains=rstFootnote,rstCitation,
\ rstHyperlinkTarget,rstExDirective
-syn match rstExplicitMarkup '^\.\.\s'
+syn match rstExplicitMarkup '^\.\.\_s'
\ nextgroup=@rstDirectives,rstComment,rstSubstitutionDefinition
let s:ReferenceName = '[[:alnum:]]\+\%([_.-][[:alnum:]]\+\)*'
@@ -91,7 +91,7 @@ execute 'syn match rstSubstitutionDefinition contained' .
function! s:DefineOneInlineMarkup(name, start, middle, end, char_left, char_right)
execute 'syn region rst' . a:name .
\ ' start=+' . a:char_left . '\zs' . a:start .
- \ '[^[:space:]' . a:char_right . a:start[strlen(a:start) - 1] . ']+' .
+ \ '\ze[^[:space:]' . a:char_right . a:start[strlen(a:start) - 1] . ']+' .
\ a:middle .
\ ' end=+\S' . a:end . '\ze\%($\|\s\|[''")\]}>/:.,;!?\\-]\)+'
endfunction
@@ -130,10 +130,10 @@ execute 'syn match rstFootnoteReference contains=@NoSpell' .
\ ' +\[\%(\d\+\|#\%(' . s:ReferenceName . '\)\=\|\*\)\]_+'
execute 'syn match rstCitationReference contains=@NoSpell' .
- \ ' +\[' . s:ReferenceName . '\]_+'
+ \ ' +\[' . s:ReferenceName . '\]_\ze\%($\|\s\|[''")\]}>/:.,;!?\\-]\)+'
execute 'syn match rstHyperlinkReference' .
- \ ' /\<' . s:ReferenceName . '__\=/'
+ \ ' /\<' . s:ReferenceName . '__\=\ze\%($\|\s\|[''")\]}>/:.,;!?\\-]\)/'
syn match rstStandaloneHyperlink contains=@NoSpell
\ "\<\%(\%(\%(https\=\|file\|ftp\|gopher\)://\|\%(mailto\|news\):\)[^[:space:]'\"<>]\+\|www[[:alnum:]_-]*\.[[:alnum:]_-]\+\.[^[:space:]'\"<>]\+\)[[:alnum:]/]"
diff --git a/src/farsi.c b/src/farsi.c
index 3da27c336..8728e8582 100644
--- a/src/farsi.c
+++ b/src/farsi.c
@@ -655,7 +655,7 @@ chg_l_to_X_orX_ ()
}
/*
-** Change the charcter left to the cursor to a X or _X type
+** Change the character left to the cursor to a X or _X type
*/
static void
@@ -724,7 +724,7 @@ chg_l_toXor_X ()
}
/*
-** Change the charcter right to the cursor to a _X or _X_ type
+** Change the character right to the cursor to a _X or _X_ type
*/
static void
diff --git a/src/farsi.h b/src/farsi.h
index 8dea422cd..ccd912ea0 100644
--- a/src/farsi.h
+++ b/src/farsi.h
@@ -7,7 +7,7 @@
*/
/*
- * Farsi characters are catagorized into following types:
+ * Farsi characters are categorized into following types:
*
* TyA (for capital letter representation)
* TyB (for types that look like _X e.g. AYN)
diff --git a/src/fold.c b/src/fold.c
index a28a8747c..07b074863 100644
--- a/src/fold.c
+++ b/src/fold.c
@@ -2684,7 +2684,7 @@ foldUpdateIEMSRecurse(gap, level, startlnum, flp, getlevel, bot, topflags)
{
if (fp->fd_top + fp->fd_len > bot + 1)
{
- /* fold coninued below bot */
+ /* fold continued below bot */
if (getlevel == foldlevelMarker
|| getlevel == foldlevelExpr
|| getlevel == foldlevelSyntax)
@@ -2834,7 +2834,7 @@ foldSplit(gap, i, top, bot)
* 3 5 6
*
* 1: not changed
- * 2: trunate to stop above "top"
+ * 2: truncate to stop above "top"
* 3: split in two parts, one stops above "top", other starts below "bot".
* 4: deleted
* 5: made to start below "bot".
@@ -2900,8 +2900,8 @@ foldRemove(gap, top, bot)
/* foldMerge() {{{2 */
/*
- * Merge two adjecent folds (and the nested ones in them).
- * This only works correctly when the folds are really adjecent! Thus "fp1"
+ * Merge two adjacent folds (and the nested ones in them).
+ * This only works correctly when the folds are really adjacent! Thus "fp1"
* must end just above "fp2".
* The resulting fold is "fp1", nested folds are moved from "fp2" to "fp1".
* Fold entry "fp2" in "gap" is deleted.
diff --git a/src/misc1.c b/src/misc1.c
index 0f75c3a4f..ddc477da6 100644
--- a/src/misc1.c
+++ b/src/misc1.c
@@ -3727,7 +3727,7 @@ expand_env_esc(srcp, dst, dstlen, esc, startstr)
if (copy_char) /* copy at least one char */
{
/*
- * Recogize the start of a new name, for '~'.
+ * Recognize the start of a new name, for '~'.
*/
at_start = FALSE;
if (src[0] == '\\' && src[1] != NUL)
@@ -4451,7 +4451,7 @@ vim_ispathlistsep(c)
#ifdef UNIX
return (c == ':');
#else
- return (c == ';'); /* might not be rigth for every system... */
+ return (c == ';'); /* might not be right for every system... */
#endif
}
#endif
@@ -4561,7 +4561,7 @@ vim_fnamencmp(x, y, len)
/*
* Concatenate file names fname1 and fname2 into allocated memory.
- * Only add a '/' or '\\' when 'sep' is TRUE and it is neccesary.
+ * Only add a '/' or '\\' when 'sep' is TRUE and it is necessary.
*/
char_u *
concat_fnames(fname1, fname2, sep)
@@ -7118,7 +7118,7 @@ get_c_indent()
/*
* What happens next depends on the line being terminated.
* If terminated with a ',' only consider it terminating if
- * there is anoter unterminated statement behind, eg:
+ * there is another unterminated statement behind, eg:
* 123,
* sizeof
* here
@@ -7306,7 +7306,7 @@ get_c_indent()
/*
* If we're below an unterminated line that is not an
* "if" or something, we may line up with this line or
- * add someting for a continuation line, depending on
+ * add something for a continuation line, depending on
* the line before this one.
*/
else
@@ -8513,7 +8513,7 @@ dos_expandpath(
char_u *path,
int wildoff,
int flags, /* EW_* flags */
- int didstar) /* expaneded "**" once already */
+ int didstar) /* expanded "**" once already */
{
char_u *buf;
char_u *path_end;
@@ -9340,7 +9340,7 @@ get_cmd_output(cmd, infile, flags)
* read the names from the file into memory
*/
# ifdef VMS
- /* created temporary file is not allways readable as binary */
+ /* created temporary file is not always readable as binary */
fd = mch_fopen((char *)tempname, "r");
# else
fd = mch_fopen((char *)tempname, READBIN);