summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeFilesLines
* board: freescale: various boards: Let env subsystem set gd->env_addrMarek Behún2021-10-318-29/+0
| | | | | | | | | | | | | | Various freescale boards set gd->env_addr to default_environment in board_init(), conditional on CONFIG_ENV_IS_NOWHERE, but this is redundant, since it is done by env_init() before board_init() is called. Let the env subsystem handle this. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* imx8mp_evk: Remove EQoS PHY reset codesYe Li2021-10-211-19/+0
| | | | | | | Since we uses the DTS and PHY reset gpio in EQoS driver to do the reset, remove the duplicated codes from board file. Signed-off-by: Ye Li <ye.li@nxp.com>
* imx8mp_evk: Fix incorrect cascade for FEC and EQOS setupYe Li2021-10-211-2/+3
| | | | | | The setup functions should be independent for two ethernet controllers Signed-off-by: Ye Li <ye.li@nxp.com>
* imx8mm-evk: Generate a single bootable flash.bin againFabio Estevam2021-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | After the conversion to binman in commit 8996e6b7c6a1 ("imx8mm_evk: switch to use binman to pack images"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mm_evk.rst to remove the u-boot.itb copy step. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
* arm: dts: imx8mp: Generate single bootable binaryTeresa Remmet2021-10-071-1/+1
| | | | | | | | | | | | | | | | | binman conversion made flashing flash.bin and u-boot.itb necessary. Update binman config to create a single flash.bin image again. This updates imx8mp_evk and phyCORE-i.MX8MP as they share the same binman config. Updated also imx8mp_evk documentation. Tested on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* nand.h: Cleanup linux/mtd/rawnand.h usageTom Rini2021-10-062-0/+2
| | | | | | | | We only include <linux/mtd/rawnand.h> in <nand.h> for the forward declaration of struct nand_chip, so do that directly. Then, include <linux/mtd/rawnand.h> where required directly. Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc: Remove MPC8349EMDS board and ARCH_MPC8349 supportTom Rini2021-10-016-537/+0
| | | | | | | | This board has not been converted to CONFIG_DM by the deadline. Remove it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* WS cleanup: remove SPACE(s) followed by TABWIP/2021-09-30-whitespace-cleanupsWolfgang Denk2021-09-307-16/+16
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* WS cleanup: remove trailing white spaceWolfgang Denk2021-09-301-1/+1
| | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* WS cleanup: remove excessive empty linesWolfgang Denk2021-09-302-3/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* WS cleanup: remove trailing empty linesWolfgang Denk2021-09-307-7/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'network_master' of ↵WIP/29Sep2021-nextTom Rini2021-09-2925-71/+70
|\ | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
| * net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x"Vladimir Oltean2021-09-287-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
| * net: replace the "xfi" phy-mode with "10gbase-r"Vladimir Oltean2021-09-2820-54/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
| * net: update NXP copyright textVladimir Oltean2021-09-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
* | Merge tag 'v2021.10-rc4' into nextTom Rini2021-09-161-0/+1
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
| * common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASHAlexandru Gagniuc2021-09-081-0/+1
| | | | | | | | | | | | | | | | | | | | All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all references to CONFIG_[ST]PL_HASH_SUPPORT. This means we need for CHAIN_OF_TRUST to select SPL_HASH now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks] Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: Disable ATAGs supportTom Rini2021-09-075-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
* | i2c: Convert CONFIG_POWER_I2C et al to KconfigSimon Glass2021-09-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
* | power: Rename CONFIG_POWER to CONFIG_POWER_LEGACYSimon Glass2021-09-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* | Kconfig: Remove all default n/no optionsMichal Simek2021-08-315-6/+0
| | | | | | | | | | | | | | | | default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini2021-08-312-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
* | imx: Finish migration of IMX_CONFIG to KconfigTom Rini2021-08-3117-1/+52
| | | | | | | | | | | | | | | | | | - Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
* | nxp: Migrate CONFIG_DDR_CLK_FREQ to KconfigTom Rini2021-08-318-31/+2
| | | | | | | | | | | | | | | | | | | | | | | | As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
* | global: Remove unused or unnecessary CONFIG symbols related to DDRTom Rini2021-08-301-23/+0
| | | | | | | | | | | | | | | | These symbols are now either unused or were only used within the config file to determine other logic, which could be done in a way that doesn't further pollute the CONFIG namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Kconfig: Use spaces not tabs in Kconfig entiresWIP/2021-08-30-kconfig-migrations-part1-nextTom Rini2021-08-301-2/+2
| | | | | | | | | | | | | | While the Kconfig language seems to accept either form of whitespace, we use a space throughout the project, except in these spots. Signed-off-by: Tom Rini <trini@konsulko.com>
* | global: Remove dead code that starts with CONFIG_[0-9A]Tom Rini2021-08-301-2/+0
| | | | | | | | | | | | | | This removes a number of spots of dead code based on symbols that start with CONFIG_[0-9] or CONFIG_A. Signed-off-by: Tom Rini <trini@konsulko.com>
* | i2c: fsl_i2c: Migrate to KconfigTom Rini2021-08-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | - As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Convert CONFIG_SYS_I2C_EARLY_INIT to KconfigTom Rini2021-08-306-14/+6
| | | | | | | | | | | | | | | | Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on SPL_SYS_I2C_LEGACY. Remove the weak implementation as it's either something that needs to exist for real, or shouldn't be called. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini2021-08-301-1/+1
|/ | | | | | | | | | | First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
* board: T4240rdb: Extend cs4340_get_fw_addr() functionalityKuldeep Singh2021-08-182-0/+22
| | | | | | | | | | T4240RDB supports booting from 2 nor banks(default and altbank). The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: t208x: Extend cs4340_get_fw_addr() functionalityKuldeep Singh2021-08-182-0/+23
| | | | | | | | | | T2080RDB supports booting from 2 nor banks(default and altbank). The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: ls2088ardb: Extend cs4340_get_fw_addr() functionalityKuldeep Singh2021-08-181-0/+38
| | | | | | | | | | | LS2088A-RDB supports TFA boot source and has 2 nor banks(default and altbank) and QSPI as boot source. The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: fsl_validate: Fix resource leak issueKshitiz Varshney2021-08-181-9/+27
| | | | | | | | | Free dynamically allocated memory before every return statement in calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using ls1046afrwy board. Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: freescale: t208xrdb: enable Power-On Reset for rev D boardsCamelia Groza2021-08-182-0/+11
| | | | | | | | Starting with board revision D, the MISCCSR CPLD register needs to be configured to enable Power-on Reset for software reset commands. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* Merge tag 'u-boot-imx-20210809' of ↵Tom Rini2021-08-099-77/+1565
|\ | | | | | | | | | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
| * arm: imx: add i.MX8ULP EVK supportPeng Fan2021-08-097-0/+1564
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * mx28evk: Convert to driver modelFabio Estevam2021-08-092-77/+1
| | | | | | | | | | | | | | | | | | | | | | Make the conversion to driver model as it is mandatory. Successfully tested booting Linux from the SD card. Dropped support for networking and splash screen as these need to be properly converted to DM and tested. Signed-off-by: Fabio Estevam <festevam@gmail.com>
* | ppc: Drop idt8t49n222a_serdes_clk driverSimon Glass2021-08-063-315/+0
| | | | | | | | | | | | This is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | pci: Drop pci_init_board()Simon Glass2021-08-063-183/+0
| | | | | | | | | | | | With the conversion to driver model, this is not needed now. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | pci: freescale: Drop old codeSimon Glass2021-08-0516-351/+0
|/ | | | | | Drop this old pre-driver model code. Signed-off-by: Simon Glass <sjg@chromium.org>
* global: Convert simple_strtoul() with decimal to dectoul()Simon Glass2021-08-022-5/+5
| | | | | | | It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
* global: Convert simple_strtoul() with hex to hextoul()Simon Glass2021-08-027-9/+9
| | | | | | | | | It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
* i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass2021-07-281-1/+1
| | | | | | | Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass2021-07-281-1/+1
| | | | | | | | | | | | | | It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* board: freescale: LX2162AQDS: Add MAINTAINERWasim Khan2021-07-201-0/+1
| | | | | | | | Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER for LX2162AQDS board Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: freescale: LX2160AQDS: Add MAINTAINERWasim Khan2021-07-201-0/+1
| | | | | | | | Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER for LX2160AQDS board Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: freescale: LX2160ARDB: Add MAINTAINERWasim Khan2021-07-201-0/+1
| | | | | | | | Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER for LX2160ARDB board Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* armv8: lx2160ardb: Add thermal node fixup for revc boardWasim Khan2021-07-201-1/+120
| | | | | | | | | | | lx2160ardb Rev-C board has i2c node for thermal monitors connected to different chip offset. Add device tree fixup to use lx2160ardb dts and apply thermal node fixups for lx2160ardb Rev-C board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> [sp:thernal->thermal] Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: freescale: t2080qds: Update I2C mux configStephen Carlson2021-07-201-25/+1
| | | | | | | Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
View Lorry Controller Status