diff options
Diffstat (limited to 'include/configs/ls1088ardb.h')
| -rw-r--r-- | include/configs/ls1088ardb.h | 137 |
1 files changed, 133 insertions, 4 deletions
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 5269bcd243..f52ea4d746 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -8,6 +8,15 @@ #include "ls1088a_common.h" +#ifdef CONFIG_TFABOOT +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x500000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SECT_SIZE 0x40000 +#else #if defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_SECT_SIZE 0x40000 @@ -21,8 +30,10 @@ #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif +#endif /* CONFIG_TFABOOT */ -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#if defined(CONFIG_TFABOOT) || \ + defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #ifndef CONFIG_SPL_BUILD #define CONFIG_QIXIS_I2C_ACCESS #endif @@ -185,7 +196,8 @@ FTIM2_GPCM_TWP(0x3E)) #define SYS_FPGA_CS_FTIM3 0x0 -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#if defined(CONFIG_TFABOOT) || \ + defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK @@ -215,7 +227,6 @@ #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 #endif - #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define I2C_MUX_CH_VOL_MONITOR 0xA @@ -274,7 +285,8 @@ #ifndef SPL_NO_QSPI /* QSPI device */ -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#if defined(CONFIG_TFABOOT) || \ + defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 #endif @@ -294,6 +306,26 @@ #ifndef SPL_NO_ENV /* Initial environment variables */ +#ifdef CONFIG_TFABOOT +#define QSPI_MC_INIT_CMD \ + "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ + "sf read 0x80100000 0xE00000 0x100000;" \ + "env exists secureboot && " \ + "sf read 0x80700000 0x700000 0x40000 && " \ + "sf read 0x80740000 0x740000 0x40000 && " \ + "esbc_validate 0x80700000 && " \ + "esbc_validate 0x80740000 ;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" +#define SD_MC_INIT_CMD \ + "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ + "mmc read 0x80100000 0x7000 0x800;" \ + "env exists secureboot && " \ + "mmc read 0x80700000 0x3800 0x10 && " \ + "mmc read 0x80740000 0x3A00 0x10 && " \ + "esbc_validate 0x80700000 && " \ + "esbc_validate 0x80740000 ;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" +#else #if defined(CONFIG_QSPI_BOOT) #define MC_INIT_CMD \ "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ @@ -317,8 +349,84 @@ "fsl_mc start mc 0x80000000 0x80100000\0" \ "mcmemsize=0x70000000\0" #endif +#endif /* CONFIG_TFABOOT */ #undef CONFIG_EXTRA_ENV_SETTINGS +#ifdef CONFIG_TFABOOT +#define CONFIG_EXTRA_ENV_SETTINGS \ + "BOARD=ls1088ardb\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x64f00000\0" \ + "kernel_addr=0x1000000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernel_start=0x580100000\0" \ + "kernelheader_start=0x580800000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr=0x800000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x81000000\0" \ + "kernelheader_size=0x40000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_size_sd=0x10\0" \ + QSPI_MC_INIT_CMD \ + "mcmemsize=0x70000000\0" \ + BOOTENV \ + "boot_scripts=ls1088ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1088ardb_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "installer=load mmc 0:2 $load_addr " \ + "/flex_installer_arm64.itb; " \ + "env exists mcinitcmd && run mcinitcmd && " \ + "mmc read 0x80001000 0x6800 0x800;" \ + "fsl_mc lazyapply dpl 0x80001000;" \ + "bootm $load_addr#ls1088ardb\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size ; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + "bootm $load_addr#$BOARD\0" \ + "sd_bootcmd=echo Trying load from sd card..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd ;" \ + "env exists secureboot && mmc read $kernelheader_addr_r "\ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$BOARD\0" +#else #define CONFIG_EXTRA_ENV_SETTINGS \ "BOARD=ls1088ardb\0" \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ @@ -391,8 +499,28 @@ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" +#endif /* CONFIG_TFABOOT */ #undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_TFABOOT +#define QSPI_NOR_BOOTCOMMAND \ + "sf read 0x80001000 0xd00000 0x100000;" \ + "env exists mcinitcmd && env exists secureboot " \ + " && sf read 0x80780000 0x780000 0x100000 " \ + "&& esbc_validate 0x80780000;env exists mcinitcmd " \ + "&& fsl_mc lazyapply dpl 0x80001000;" \ + "run distro_bootcmd;run qspi_bootcmd;" \ + "env exists secureboot && esbc_halt;" +#define SD_BOOTCOMMAND \ + "env exists mcinitcmd && mmcinfo; " \ + "mmc read 0x80001000 0x6800 0x800; " \ + "env exists mcinitcmd && env exists secureboot " \ + " && mmc read 0x80780000 0x3C00 0x10 " \ + "&& esbc_validate 0x80780000;env exists mcinitcmd " \ + "&& fsl_mc lazyapply dpl 0x80001000;" \ + "run distro_bootcmd;run sd_bootcmd;" \ + "env exists secureboot && esbc_halt;" +#else #if defined(CONFIG_QSPI_BOOT) /* Try to boot an on-QSPI kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ @@ -416,6 +544,7 @@ "run distro_bootcmd;run sd_bootcmd;" \ "env exists secureboot && esbc_halt;" #endif +#endif /* CONFIG_TFABOOT */ /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET |