1 files changed, 0 insertions, 109 deletions
diff --git a/board/bct-brettl2/bct-brettl2.c b/board/bct-brettl2/bct-brettl2.c
deleted file mode 100644
index adb8605bb9..0000000000
--- a/board/bct-brettl2/bct-brettl2.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * U-Boot - main board file for BCT brettl2
- *
- * Copyright (c) 2010 BCT Electronic GmbH
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/portmux.h>
-#include <asm/gpio.h>
-#include <net.h>
-#include <netdev.h>
-#include <miiphy.h>
-
-#include "../cm-bf537e/gpio_cfi_flash.h"
-#include "smsc9303.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	printf("Board: bct-brettl2 board\n");
-	printf("       Support: http://www.bct-electronic.com/\n");
-	return 0;
-}
-
-#ifdef CONFIG_BFIN_MAC
-int board_eth_init(bd_t *bis)
-{
-	int retry = 3;
-	int ret;
-
-	ret = bfin_EMAC_initialize(bis);
-
-	uchar enetaddr[6];
-	if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		printf("setting MAC %pM\n", enetaddr);
-	}
-	puts("       ");
-
-	puts("initialize SMSC LAN9303i ethernet switch\n");
-
-	while (retry-- > 0) {
-		if (init_smsc9303i_mii())
-			return ret;
-	}
-
-	return ret;
-}
-#endif
-
-static void init_tlv320aic31(void)
-{
-	puts("Audio: setup TIMER0 to enable 16.384 MHz clock for tlv320aic31\n");
-	peripheral_request(P_TMR0, "tlv320aic31 clock");
-	bfin_write_TIMER0_CONFIG(0x020d);
-	bfin_write_TIMER0_PERIOD(0x0008);
-	bfin_write_TIMER0_WIDTH(0x0008/2);
-	bfin_write_TIMER_ENABLE(bfin_read_TIMER_ENABLE() | 1);
-	SSYNC();
-	udelay(10000);
-
-	puts("       resetting tlv320aic31\n");
-
-	gpio_request(GPIO_PF2, "tlv320aic31");
-	gpio_direction_output(GPIO_PF2, 0);
-	udelay(10000);
-	gpio_direction_output(GPIO_PF2, 1);
-	udelay(10000);
-	gpio_free(GPIO_PF2);
-}
-
-static void init_mute_pin(void)
-{
-	printf("       unmute class D amplifier\n");
-
-	gpio_request(GPIO_PF5, "mute");
-	gpio_direction_output(GPIO_PF5, 1);
-	gpio_free(GPIO_PF5);
-}
-
-/* sometimes LEDs (speech, status) are still on after reboot, turn 'em off */
-static void turn_leds_off(void)
-{
-	printf("       turn LEDs off\n");
-
-	gpio_request(GPIO_PF6, "led");
-	gpio_direction_output(GPIO_PF6, 0);
-	gpio_free(GPIO_PF6);
-
-	gpio_request(GPIO_PF15, "led");
-	gpio_direction_output(GPIO_PF15, 0);
-	gpio_free(GPIO_PF15);
-}
-
-/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
-{
-	gpio_cfi_flash_init();
-	init_tlv320aic31();
-	init_mute_pin();
-	turn_leds_off();
-
-	return 0;
-}