diff options
Diffstat (limited to 'arch/powerpc')
38 files changed, 23 insertions, 8167 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index f37a9cbffb..671d2cc0cf 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -41,9 +41,6 @@ config MPC86xx select SYS_FSL_DDR select SYS_FSL_DDR_BE -config 8xx - bool "MPC8xx" - config 4xx bool "PPC4xx" select CREATE_ARCH_SYMLINK @@ -60,7 +57,6 @@ source "arch/powerpc/cpu/mpc8260/Kconfig" source "arch/powerpc/cpu/mpc83xx/Kconfig" source "arch/powerpc/cpu/mpc85xx/Kconfig" source "arch/powerpc/cpu/mpc86xx/Kconfig" -source "arch/powerpc/cpu/mpc8xx/Kconfig" source "arch/powerpc/cpu/ppc4xx/Kconfig" endmenu diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig deleted file mode 100644 index 79cee35fb1..0000000000 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ /dev/null @@ -1,51 +0,0 @@ -menu "mpc8xx CPU" - depends on 8xx - -config SYS_CPU - default "mpc8xx" - -choice - prompt "Target select" - optional - -config TARGET_TQM823L - bool "Support TQM823L" - -config TARGET_TQM823M - bool "Support TQM823M" - -config TARGET_TQM850L - bool "Support TQM850L" - -config TARGET_TQM850M - bool "Support TQM850M" - -config TARGET_TQM855L - bool "Support TQM855L" - -config TARGET_TQM855M - bool "Support TQM855M" - -config TARGET_TQM860L - bool "Support TQM860L" - -config TARGET_TQM860M - bool "Support TQM860M" - -config TARGET_TQM862L - bool "Support TQM862L" - -config TARGET_TQM862M - bool "Support TQM862M" - -config TARGET_TQM866M - bool "Support TQM866M" - -config TARGET_TQM885D - bool "Support TQM885D" - -endchoice - -source "board/tqc/tqm8xx/Kconfig" - -endmenu diff --git a/arch/powerpc/cpu/mpc8xx/Makefile b/arch/powerpc/cpu/mpc8xx/Makefile deleted file mode 100644 index fc91a054f0..0000000000 --- a/arch/powerpc/cpu/mpc8xx/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# ccflags-y += -DET_DEBUG - -extra-y += start.o -extra-y += traps.o -obj-y += bedbug_860.o -obj-y += cpu.o -obj-y += cpu_init.o -obj-y += fec.o -obj-$(CONFIG_OF_LIBFDT) += fdt.o -obj-y += interrupts.o -obj-y += scc.o -obj-y += serial.o -obj-y += speed.o -obj-y += spi.o -obj-y += upatch.o -obj-y += video.o -obj-y += kgdb.o -obj-y += plprcr_write.o diff --git a/arch/powerpc/cpu/mpc8xx/bedbug_860.c b/arch/powerpc/cpu/mpc8xx/bedbug_860.c deleted file mode 100644 index c0016f72ff..0000000000 --- a/arch/powerpc/cpu/mpc8xx/bedbug_860.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - * Bedbug Functions specific to the MPC860 chip - */ - -#include <common.h> -#include <command.h> -#include <linux/ctype.h> -#include <bedbug/bedbug.h> -#include <bedbug/regs.h> -#include <bedbug/ppc.h> -#include <bedbug/type.h> - -#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx) - -#define MAX_BREAK_POINTS 2 - -extern CPU_DEBUG_CTX bug_ctx; - -void bedbug860_init __P((void)); -void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*const[])); -void bedbug860_break_isr __P((struct pt_regs*)); -int bedbug860_find_empty __P((void)); -int bedbug860_set __P((int,unsigned long)); -int bedbug860_clear __P((int)); - - -/* ====================================================================== - * Initialize the global bug_ctx structure for the MPC860. Clear all - * of the breakpoints. - * ====================================================================== */ - -void bedbug860_init( void ) -{ - int i; - /* -------------------------------------------------- */ - - bug_ctx.hw_debug_enabled = 0; - bug_ctx.stopped = 0; - bug_ctx.current_bp = 0; - bug_ctx.regs = NULL; - - bug_ctx.do_break = bedbug860_do_break; - bug_ctx.break_isr = bedbug860_break_isr; - bug_ctx.find_empty = bedbug860_find_empty; - bug_ctx.set = bedbug860_set; - bug_ctx.clear = bedbug860_clear; - - for( i = 1; i <= MAX_BREAK_POINTS; ++i ) - (*bug_ctx.clear)( i ); - - puts ("BEDBUG:ready\n"); - return; -} /* bedbug_init_breakpoints */ - - - -/* ====================================================================== - * Set/clear/show one of the hardware breakpoints for the 860. The "off" - * string will disable a specific breakpoint. The "show" string will - * display the current breakpoints. Otherwise an address will set a - * breakpoint at that address. Setting a breakpoint uses the CPU-specific - * set routine which will assign a breakpoint number. - * ====================================================================== */ - -void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - long addr = 0; /* Address to break at */ - int which_bp; /* Breakpoint number */ - /* -------------------------------------------------- */ - - if (argc < 2) { - cmd_usage(cmdtp); - return; - } - - /* Turn off a breakpoint */ - - if( strcmp( argv[ 1 ], "off" ) == 0 ) - { - if( bug_ctx.hw_debug_enabled == 0 ) - { - printf( "No breakpoints enabled\n" ); - return; - } - - which_bp = simple_strtoul( argv[ 2 ], NULL, 10 ); - - if( bug_ctx.clear ) - (*bug_ctx.clear)( which_bp ); - - printf( "Breakpoint %d removed\n", which_bp ); - return; - } - - /* Show a list of breakpoints */ - - if( strcmp( argv[ 1 ], "show" ) == 0 ) - { - for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp ) - { - - switch( which_bp ) - { - case 1: addr = GET_CMPA(); break; - case 2: addr = GET_CMPB(); break; - case 3: addr = GET_CMPC(); break; - case 4: addr = GET_CMPD(); break; - } - - printf( "Breakpoint [%d]: ", which_bp ); - if( addr == 0 ) - printf( "NOT SET\n" ); - else - disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX ); - } - return; - } - - /* Set a breakpoint at the address */ - - if( !isdigit( argv[ 1 ][ 0 ])) { - cmd_usage(cmdtp); - return; - } - - addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc; - - if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 ) - { - printf( "Breakpoint [%d]: ", which_bp ); - disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX ); - } - - return; -} /* bedbug860_do_break */ - - - -/* ====================================================================== - * Handle a breakpoint. First determine which breakpoint was hit by - * looking at the DeBug Status Register (DBSR), clear the breakpoint - * and enter a mini main loop. Stay in the loop until the stopped flag - * in the debug context is cleared. - * ====================================================================== */ - -void bedbug860_break_isr( struct pt_regs *regs ) -{ - unsigned long addr; /* Address stopped at */ - unsigned long cause; /* Address stopped at */ - /* -------------------------------------------------- */ - - cause = GET_ICR(); - - if( !(cause & 0x00000004)) { - printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause ); - return; - } - - addr = regs->nip; - - if( addr == GET_CMPA() ) - { - bug_ctx.current_bp = 1; - } - else if( addr == GET_CMPB() ) - { - bug_ctx.current_bp = 2; - } - else if( addr == GET_CMPC() ) - { - bug_ctx.current_bp = 3; - } - else if( addr == GET_CMPD() ) - { - bug_ctx.current_bp = 4; - } - - bedbug_main_loop( addr, regs ); - return; -} /* bedbug860_break_isr */ - - - -/* ====================================================================== - * Look through all of the hardware breakpoints available to see if one - * is unused. - * ====================================================================== */ - -int bedbug860_find_empty( void ) -{ - /* -------------------------------------------------- */ - - if( GET_CMPA() == 0 ) - return 1; - - if( GET_CMPB() == 0 ) - return 2; - - if( GET_CMPC() == 0 ) - return 3; - - if( GET_CMPD() == 0 ) - return 4; - - return 0; -} /* bedbug860_find_empty */ - - - -/* ====================================================================== - * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint - * number, otherwise reassign the given breakpoint. If hardware debugging - * is not enabled, then turn it on via the MSR and DBCR0. Set the break - * address in the appropriate IACx register and enable proper address - * beakpoint in DBCR0. - * ====================================================================== */ - -int bedbug860_set( int which_bp, unsigned long addr ) -{ - /* -------------------------------------------------- */ - - /* Only look if which_bp == 0, else use which_bp */ - if(( bug_ctx.find_empty ) && ( !which_bp ) && - ( which_bp = (*bug_ctx.find_empty)()) == 0 ) - { - printf( "All breakpoints in use\n" ); - return 0; - } - - if( which_bp < 1 || which_bp > MAX_BREAK_POINTS ) - { - printf( "Invalid break point # %d\n", which_bp ); - return 0; - } - - if( ! bug_ctx.hw_debug_enabled ) - { - bug_ctx.hw_debug_enabled = 1; - SET_DER( GET_DER() | 0x00000004 ); - } - - switch( which_bp ) - { - case 1: - SET_CMPA( addr ); - SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */ - break; - - case 2: - SET_CMPB( addr ); - SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */ - break; - - case 3: - SET_CMPC( addr ); - SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */ - break; - - case 4: - SET_CMPD( addr ); - SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */ - break; - } - - return which_bp; -} /* bedbug860_set */ - - - -/* ====================================================================== - * Disable a specific breakoint by setting the appropriate IACx register - * to zero and claring the instruction address breakpoint in DBCR0. - * ====================================================================== */ - -int bedbug860_clear( int which_bp ) -{ - /* -------------------------------------------------- */ - - if( which_bp < 1 || which_bp > MAX_BREAK_POINTS ) - { - printf( "Invalid break point # (%d)\n", which_bp ); - return -1; - } - - switch( which_bp ) - { - case 1: - SET_CMPA( 0 ); - SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */ - break; - - case 2: - SET_CMPB( 0 ); - SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */ - break; - - case 3: - SET_CMPC( 0 ); - SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */ - break; - - case 4: - SET_CMPD( 0 ); - SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */ - break; - } - - return 0; -} /* bedbug860_clear */ - - -/* ====================================================================== */ -#endif diff --git a/arch/powerpc/cpu/mpc8xx/config.mk b/arch/powerpc/cpu/mpc8xx/config.mk deleted file mode 100644 index 485e43d2de..0000000000 --- a/arch/powerpc/cpu/mpc8xx/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mstring -mcpu=860 -msoft-float diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c deleted file mode 100644 index 105be9ccc7..0000000000 --- a/arch/powerpc/cpu/mpc8xx/cpu.c +++ /dev/null @@ -1,580 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * m8xx.c - * - * CPU specific code - * - * written or collected and sometimes rewritten by - * Magnus Damm <damm@bitsmart.com> - * - * minor modifications by - * Wolfgang Denk <wd@denx.de> - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <mpc8xx.h> -#include <commproc.h> -#include <netdev.h> -#include <asm/cache.h> -#include <linux/compiler.h> -#include <asm/io.h> - -#if defined(CONFIG_OF_LIBFDT) -#include <libfdt.h> -#include <fdt_support.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static char *cpu_warning = "\n " \ - "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***"; - -#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \ - !defined(CONFIG_MPC862)) - -static int check_CPU (long clock, uint pvr, uint immr) -{ - char *id_str = -# if defined(CONFIG_MPC855) - "PC855"; -# elif defined(CONFIG_MPC860P) - "PC860P"; -# else - NULL; -# endif - volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000); - uint k, m; - char buf[32]; - char pre = 'X'; - char *mid = "xx"; - char *suf; - - /* the highest 16 bits should be 0x0050 for a 860 */ - - if ((pvr >> 16) != 0x0050) - return -1; - - k = (immr << 16) | - immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]; - m = 0; - suf = ""; - - /* - * Some boards use sockets so different CPUs can be used. - * We have to check chip version in run time. - */ - switch (k) { - case 0x00020001: pre = 'P'; break; - case 0x00030001: break; - case 0x00120003: suf = "A"; break; - case 0x00130003: suf = "A3"; break; - - case 0x00200004: suf = "B"; break; - - case 0x00300004: suf = "C"; break; - case 0x00310004: suf = "C1"; m = 1; break; - - case 0x00200064: mid = "SR"; suf = "B"; break; - case 0x00300065: mid = "SR"; suf = "C"; break; - case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break; - case 0x05010000: suf = "D3"; m = 1; break; - case 0x05020000: suf = "D4"; m = 1; break; - /* this value is not documented anywhere */ - case 0x40000000: pre = 'P'; suf = "D"; m = 1; break; - /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */ - case 0x08010004: /* Rev. A.0 */ - suf = "A"; - /* fall through */ - case 0x08000003: /* Rev. 0.3 */ - pre = 'M'; m = 1; - if (id_str == NULL) - id_str = -# if defined(CONFIG_MPC859T) - "PC859T"; -# else - "PC866x"; /* Unknown chip from MPC866 family */ -# endif - break; - case 0x09000000: pre = 'M'; mid = suf = ""; m = 1; - if (id_str == NULL) - id_str = "PC885"; /* 870/875/880/885 */ - break; - - default: suf = NULL; break; - } - - if (id_str == NULL) - id_str = "PC86x"; /* Unknown 86x chip */ - if (suf) - printf ("%c%s%sZPnn%s", pre, id_str, mid, suf); - else - printf ("unknown M%s (0x%08x)", id_str, k); - - -#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX) - printf (" at %s MHz [%d.%d...%d.%d MHz]\n ", - strmhz (buf, clock), - CONFIG_SYS_8xx_CPUCLK_MIN / 1000000, - ((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000, - CONFIG_SYS_8xx_CPUCLK_MAX / 1000000, - ((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000 - ); -#else - printf (" at %s MHz: ", strmhz (buf, clock)); -#endif - print_size(checkicache(), " I-Cache "); - print_size(checkdcache(), " D-Cache"); - - /* do we have a FEC (860T/P or 852/859/866/885)? */ - - immap->im_cpm.cp_fec.fec_addr_low = 0x12345678; - if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) { - printf (" FEC present"); - } - - if (!m) { - puts (cpu_warning); - } - - putc ('\n'); - -#ifdef DEBUG - if(clock != measure_gclk()) { - printf ("clock %ldHz != %dHz\n", clock, measure_gclk()); - } -#endif - - return 0; -} - -#elif defined(CONFIG_MPC862) - -static int check_CPU (long clock, uint pvr, uint immr) -{ - volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000); - uint k, m; - char buf[32]; - char pre = 'X'; - __maybe_unused char *mid = "xx"; - char *suf; - - /* the highest 16 bits should be 0x0050 for a 8xx */ - - if ((pvr >> 16) != 0x0050) - return -1; - - k = (immr << 16) | - immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]; - m = 0; - - switch (k) { - - /* this value is not documented anywhere */ - case 0x06000000: mid = "P"; suf = "0"; break; - case 0x06010001: mid = "P"; suf = "A"; m = 1; break; - case 0x07000003: mid = "P"; suf = "B"; m = 1; break; - default: suf = NULL; break; - } - -#ifndef CONFIG_MPC857 - if (suf) - printf ("%cPC862%sZPnn%s", pre, mid, suf); - else - printf ("unknown MPC862 (0x%08x)", k); -#else - if (suf) - printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */ - else - printf ("unknown MPC857 (0x%08x)", k); -#endif - - printf(" at %s MHz: ", strmhz(buf, clock)); - - print_size(checkicache(), " I-Cache "); - print_size(checkdcache(), " D-Cache"); - - /* lets check and see if we're running on a 862T (or P?) */ - - immap->im_cpm.cp_fec.fec_addr_low = 0x12345678; - if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) { - printf (" FEC present"); - } - - if (!m) { - puts (cpu_warning); - } - - putc ('\n'); - - return 0; -} - -#elif defined(CONFIG_MPC823) - -static int check_CPU (long clock, uint pvr, uint immr) -{ - volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000); - uint k, m; - char buf[32]; - char *suf; - - /* the highest 16 bits should be 0x0050 for a 8xx */ - - if ((pvr >> 16) != 0x0050) - return -1; - - k = (immr << 16) | - in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]); - m = 0; - - switch (k) { - /* MPC823 */ - case 0x20000000: suf = "0"; break; - case 0x20010000: suf = "0.1"; break; - case 0x20020000: suf = "Z2/3"; break; - case 0x20020001: suf = "Z3"; break; - case 0x21000000: suf = "A"; break; - case 0x21010000: suf = "B"; m = 1; break; - case 0x21010001: suf = "B2"; m = 1; break; - /* MPC823E */ - case 0x24010000: suf = NULL; - puts ("PPC823EZTnnB2"); - m = 1; - break; - default: - suf = NULL; - printf ("unknown MPC823 (0x%08x)", k); - break; - } - if (suf) - printf ("PPC823ZTnn%s", suf); - - printf(" at %s MHz: ", strmhz(buf, clock)); - - print_size(checkicache(), " I-Cache "); - print_size(checkdcache(), " D-Cache"); - - /* lets check and see if we're running on a 860T (or P?) */ - - immap->im_cpm.cp_fec.fec_addr_low = 0x12345678; - if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) { - puts (" FEC present"); - } - - if (!m) { - puts (cpu_warning); - } - - putc ('\n'); - - return 0; -} - -#elif defined(CONFIG_MPC850) - -static int check_CPU (long clock, uint pvr, uint immr) -{ - volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000); - uint k, m; - char buf[32]; - - /* the highest 16 bits should be 0x0050 for a 8xx */ - - if ((pvr >> 16) != 0x0050) - return -1; - - k = (immr << 16) | - immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]; - m = 0; - - switch (k) { - case 0x20020001: - printf ("XPC850xxZT"); - break; - case 0x21000065: - printf ("XPC850xxZTA"); - break; - case 0x21010067: - printf ("XPC850xxZTB"); - m = 1; - break; - case 0x21020068: - printf ("XPC850xxZTC"); - m = 1; - break; - default: - printf ("unknown MPC850 (0x%08x)", k); - } - printf(" at %s MHz: ", strmhz(buf, clock)); - - print_size(checkicache(), " I-Cache "); - print_size(checkdcache(), " D-Cache"); - - /* lets check and see if we're running on a 850T (or P?) */ - - immap->im_cpm.cp_fec.fec_addr_low = 0x12345678; - if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) { - printf (" FEC present"); - } - - if (!m) { - puts (cpu_warning); - } - - putc ('\n'); - - return 0; -} -#else -#error CPU undefined -#endif -/* ------------------------------------------------------------------------- */ - -int checkcpu (void) -{ - ulong clock = gd->cpu_clk; - uint immr = get_immr (0); /* Return full IMMR contents */ - uint pvr = get_pvr (); - - puts ("CPU: "); - - /* 850 has PARTNUM 20 */ - /* 801 has PARTNUM 10 */ - return check_CPU (clock, pvr, immr); -} - -/* ------------------------------------------------------------------------- */ -/* L1 i-cache */ -/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */ -/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */ - -int checkicache (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - u32 cacheon = rd_ic_cst () & IDC_ENABLED; - -#ifdef CONFIG_IP86x - u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */ -#else - u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */ -#endif - u32 m; - u32 lines = -1; - - wr_ic_cst (IDC_UNALL); - wr_ic_cst (IDC_INVALL); - wr_ic_cst (IDC_DISABLE); - __asm__ volatile ("isync"); - - while (!((m = rd_ic_cst ()) & IDC_CERR2)) { - wr_ic_adr (k); - wr_ic_cst (IDC_LDLCK); - __asm__ volatile ("isync"); - - lines++; - k += 0x10; /* the number of bytes in a cacheline */ - } - - wr_ic_cst (IDC_UNALL); - wr_ic_cst (IDC_INVALL); - - if (cacheon) - wr_ic_cst (IDC_ENABLE); - else - wr_ic_cst (IDC_DISABLE); - - __asm__ volatile ("isync"); - - return lines << 4; -}; - -/* ------------------------------------------------------------------------- */ -/* L1 d-cache */ -/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */ -/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */ -/* call with cache disabled */ - -int checkdcache (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - u32 cacheon = rd_dc_cst () & IDC_ENABLED; - -#ifdef CONFIG_IP86x - u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */ -#else - u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */ -#endif - u32 m; - u32 lines = -1; - - wr_dc_cst (IDC_UNALL); - wr_dc_cst (IDC_INVALL); - wr_dc_cst (IDC_DISABLE); - - while (!((m = rd_dc_cst ()) & IDC_CERR2)) { - wr_dc_adr (k); - wr_dc_cst (IDC_LDLCK); - lines++; - k += 0x10; /* the number of bytes in a cacheline */ - } - - wr_dc_cst (IDC_UNALL); - wr_dc_cst (IDC_INVALL); - - if (cacheon) - wr_dc_cst (IDC_ENABLE); - else - wr_dc_cst (IDC_DISABLE); - - return lines << 4; -}; - -/* ------------------------------------------------------------------------- */ - -void upmconfig (uint upm, uint * table, uint size) -{ - uint i; - uint addr = 0; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - for (i = 0; i < size; i++) { - memctl->memc_mdr = table[i]; /* (16-15) */ - memctl->memc_mcr = addr | upm; /* (16-16) */ - addr++; - } -} - -/* ------------------------------------------------------------------------- */ - -int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong msr, addr; - - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */ - - /* Interrupts and MMU off */ - __asm__ volatile ("mtspr 81, 0"); - __asm__ volatile ("mfmsr %0":"=r" (msr)); - - msr &= ~0x1030; - __asm__ volatile ("mtmsr %0"::"r" (msr)); - - /* - * Trying to execute the next instruction at a non-existing address - * should cause a machine check, resulting in reset - */ -#ifdef CONFIG_SYS_RESET_ADDRESS - addr = CONFIG_SYS_RESET_ADDRESS; -#else - /* - * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE - * - sizeof (ulong) is usually a valid address. Better pick an address - * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS. - * "(ulong)-1" used to be a good choice for many systems... - */ - addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong); -#endif - ((void (*)(void)) addr) (); - return 1; -} - -/* ------------------------------------------------------------------------- */ - -/* - * Get timebase clock frequency (like cpu_clk in Hz) - * - * See sections 14.2 and 14.6 of the User's Manual - */ -unsigned long get_tbclk (void) -{ - uint immr = get_immr (0); /* Return full IMMR contents */ - volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000); - ulong oscclk, factor, pll; - - if (immap->im_clkrst.car_sccr & SCCR_TBS) { - return (gd->cpu_clk / 16); - } - - pll = immap->im_clkrst.car_plprcr; - -#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT) - - /* - * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication - * factor is calculated as follows: - * - * MFN - * MFI + ------- - * MFD + 1 - * factor = ----------------- - * (PDF + 1) * 2^S - * - * For older chips, it's just MF field of PLPRCR plus one. - */ - if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */ - factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/ - (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S)); - } else { - factor = PLPRCR_val(MF)+1; - } - - oscclk = gd->cpu_clk / factor; - - if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) { - return (oscclk / 4); - } - return (oscclk / 16); -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_WATCHDOG) -void watchdog_reset (void) -{ - int re_enable = disable_interrupts (); - - reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR); - if (re_enable) - enable_interrupts (); -} -#endif /* CONFIG_WATCHDOG */ - -#if defined(CONFIG_WATCHDOG) - -void reset_8xx_watchdog (volatile immap_t * immr) -{ - /* - * All other boards use the MPC8xx Internal Watchdog - */ - immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */ - immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */ -} -#endif /* CONFIG_WATCHDOG */ - -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(bd_t *bis) -{ -#if defined(SCC_ENET) && defined(CONFIG_CMD_NET) - scc_initialize(bis); -#endif -#if defined(FEC_ENET) - fec_initialize(bis); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c deleted file mode 100644 index f621d6285c..0000000000 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <watchdog.h> - -#include <mpc8xx.h> -#include <commproc.h> - -#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS) -DECLARE_GLOBAL_DATA_PTR; -#endif - -#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \ - defined(CONFIG_SYS_SMC_UCODE_PATCH) -void cpm_load_patch (volatile immap_t * immr); -#endif - -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f (volatile immap_t * immr) -{ - volatile memctl8xx_t *memctl = &immr->im_memctl; -# ifdef CONFIG_SYS_PLPRCR - ulong mfmask; -# endif - ulong reg; - - /* SYPCR - contains watchdog control (11-9) */ - - immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR; - -#if defined(CONFIG_WATCHDOG) - reset_8xx_watchdog (immr); -#endif /* CONFIG_WATCHDOG */ - - /* SIUMCR - contains debug pin configuration (11-6) */ - immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR; - /* initialize timebase status and control register (11-26) */ - /* unlock TBSCRK */ - - immr->im_sitk.sitk_tbscrk = KAPWR_KEY; - immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR; - - /* initialize the PIT (11-31) */ - - immr->im_sitk.sitk_piscrk = KAPWR_KEY; - immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; - - /* System integration timers. Don't change EBDF! (15-27) */ - - immr->im_clkrstk.cark_sccrk = KAPWR_KEY; - reg = immr->im_clkrst.car_sccr; - reg &= SCCR_MASK; - reg |= CONFIG_SYS_SCCR; - immr->im_clkrst.car_sccr = reg; - - /* PLL (CPU clock) settings (15-30) */ - - immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; - - /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to - * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr, - * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF - * field value. - * - * For newer (starting MPC866) chips PLPRCR layout is different. - */ -#ifdef CONFIG_SYS_PLPRCR - if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK) - mfmask = PLPRCR_MFACT_MSK; - else - mfmask = PLPRCR_MF_MSK; - - if ((CONFIG_SYS_PLPRCR & mfmask) != 0) - reg = CONFIG_SYS_PLPRCR; /* reset control bits */ - else { - reg = immr->im_clkrst.car_plprcr; - reg &= mfmask; /* isolate MF-related fields */ - reg |= CONFIG_SYS_PLPRCR; /* reset control bits */ - } - immr->im_clkrst.car_plprcr = reg; -#endif - - /* - * Memory Controller: - */ - - /* perform BR0 reset that MPC850 Rev. A can't guarantee */ - reg = memctl->memc_br0; - reg &= BR_PS_MSK; /* Clear everything except Port Size bits */ - reg |= BR_V; /* then add just the "Bank Valid" bit */ - memctl->memc_br0 = reg; - - /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at - * preliminary addresses - these have to be modified later - * when FLASH size has been determined - * - * Depending on the size of the memory region defined by - * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the - * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't - * map CONFIG_SYS_MONITOR_BASE. - * - * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is - * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000. - * - * If BR0 wasn't loaded with address base 0xff000000, then BR0's - * base address remains as 0x00000000. However, the address mask - * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped - * into the Bank0. - * - * This is why CONFIG_IVMS8 and similar boards must load BR0 with - * CONFIG_SYS_BR0_PRELIM in advance. - * - * [Thanks to Michael Liao for this explanation. - * I owe him a free beer. - wd] - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->memc_or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->memc_or1 = CONFIG_SYS_OR1_REMAP; -#endif -#if defined(CONFIG_SYS_OR5_REMAP) - memctl->memc_or5 = CONFIG_SYS_OR5_REMAP; -#endif - - /* now restrict to preliminary range */ - memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; - memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; - -#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM)) - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; -#endif - -#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM) - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM) - memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM; - memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM) - memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM; - memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM) - memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM; - memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM) - memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM; - memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM; -#endif - - /* - * Reset CPM - */ - immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG; - do { /* Spin until command processed */ - __asm__ ("eieio"); - } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); - -#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */ - /* write config value */ - immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR; -#endif - -#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \ - defined(CONFIG_SYS_SMC_UCODE_PATCH) - cpm_load_patch (immr); /* load mpc8xx microcode patch */ -#endif -} - -/* - * initialize higher level parts of CPU like timers - */ -int cpu_init_r (void) -{ -#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS) - bd_t *bd = gd->bd; - volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base); -#endif - -#ifdef CONFIG_SYS_RTCSC - /* Unlock RTSC register */ - immr->im_sitk.sitk_rtcsck = KAPWR_KEY; - /* write config value */ - immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC; -#endif - -#ifdef CONFIG_SYS_RMDS - /* write config value */ - immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS; -#endif - return (0); -} diff --git a/arch/powerpc/cpu/mpc8xx/fdt.c b/arch/powerpc/cpu/mpc8xx/fdt.c deleted file mode 100644 index 34d36478d3..0000000000 --- a/arch/powerpc/cpu/mpc8xx/fdt.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright 2008 (C) Bryan O'Donoghue - * - * Code copied & edited from Freescale mpc85xx stuff. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <libfdt.h> -#include <fdt_support.h> - -DECLARE_GLOBAL_DATA_PTR; - -void ft_cpu_setup(void *blob, bd_t *bd) -{ - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", get_tbclk(), 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "clock-frequency", bd->bi_intfreq, 1); - do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency", - gd->arch.brg_clk, 1); - - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); -} diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c deleted file mode 100644 index b27310fffb..0000000000 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ /dev/null @@ -1,933 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <commproc.h> -#include <malloc.h> -#include <net.h> - -#include <phy.h> - -DECLARE_GLOBAL_DATA_PTR; - -#undef ET_DEBUG - -#if defined(CONFIG_CMD_NET) && \ - (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)) - -/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */ -#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2) -#define CONFIG_ETHER_ON_FEC1 1 -#endif - -/* define WANT_MII when MII support is required */ -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY) -#define WANT_MII -#else -#undef WANT_MII -#endif - -#if defined(WANT_MII) -#include <miiphy.h> - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#endif - -#if defined(CONFIG_RMII) && !defined(WANT_MII) -#error RMII support is unusable without a working PHY. -#endif - -#ifdef CONFIG_SYS_DISCOVER_PHY -static int mii_discover_phy(struct eth_device *dev); -#endif - -int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg); -int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg, - u16 value); - -static struct ether_fcc_info_s -{ - int ether_index; - int fecp_offset; - int phy_addr; - int actual_phy_addr; - int initialized; -} - ether_fcc_info[] = { -#if defined(CONFIG_ETHER_ON_FEC1) - { - 0, - offsetof(immap_t, im_cpm.cp_fec1), -#if defined(CONFIG_FEC1_PHY) - CONFIG_FEC1_PHY, -#else - -1, /* discover */ -#endif - -1, - 0, - - }, -#endif -#if defined(CONFIG_ETHER_ON_FEC2) - { - 1, - offsetof(immap_t, im_cpm.cp_fec2), -#if defined(CONFIG_FEC2_PHY) - CONFIG_FEC2_PHY, -#else - -1, -#endif - -1, - 0, - }, -#endif -}; - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#define TOUT_LOOP 100 - -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - -#ifdef __GNUC__ -static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8))); -#else -#error txbuf must be aligned. -#endif - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx = NULL; - -static int fec_send(struct eth_device *dev, void *packet, int length); -static int fec_recv(struct eth_device* dev); -static int fec_init(struct eth_device* dev, bd_t * bd); -static void fec_halt(struct eth_device* dev); -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) -static void __mii_init(void); -#endif - -int fec_initialize(bd_t *bis) -{ - struct eth_device* dev; - struct ether_fcc_info_s *efis; - int i; - - for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) { - - dev = malloc(sizeof(*dev)); - if (dev == NULL) - hang(); - - memset(dev, 0, sizeof(*dev)); - - /* for FEC1 make sure that the name of the interface is the same - as the old one for compatibility reasons */ - if (i == 0) { - strcpy(dev->name, "FEC"); - } else { - sprintf (dev->name, "FEC%d", - ether_fcc_info[i].ether_index + 1); - } - - efis = ðer_fcc_info[i]; - - /* - * reset actual phy addr - */ - efis->actual_phy_addr = -1; - - dev->priv = efis; - dev->init = fec_init; - dev->halt = fec_halt; - dev->send = fec_send; - dev->recv = fec_recv; - - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); - mdiodev->read = fec8xx_miiphy_read; - mdiodev->write = fec8xx_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; -#endif - } - return 1; -} - -static int fec_send(struct eth_device *dev, void *packet, int length) -{ - int j, rc; - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - - /* section 16.9.23.3 - * Wait for ready - */ - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { - udelay(1); - j++; - } - if (j>=TOUT_LOOP) { - printf("TX not ready\n"); - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; - __asm__ ("eieio"); - - /* Activate transmit Buffer Descriptor polling */ - fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ - - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { - udelay(1); - j++; - } - if (j>=TOUT_LOOP) { - printf("TX timeout\n"); - } -#ifdef ET_DEBUG - printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc, - (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2); -#endif - /* return only status bits */; - rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); - - txIdx = (txIdx + 1) % TX_BUF_CNT; - - return rc; -} - -static int fec_recv (struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = - (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); - int length; - - for (;;) { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { -#ifdef ET_DEBUG - printf ("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - rtx->rxbd[rxIdx].cbd_sc); -#endif - } else { - uchar *rx = net_rx_packets[rxIdx]; - - length -= 4; - -#if defined(CONFIG_CMD_CDP) - if ((rx[0] & 1) != 0 && - memcmp((uchar *)rx, net_bcast_ethaddr, 6) != 0 && - !is_cdp_packet((uchar *)rx)) - rx = NULL; -#endif - /* - * Pass the packet up to the protocol layers. - */ - if (rx != NULL) - net_process_received_packet(rx, length); - } - - /* Give the buffer back to the FEC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = - (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - - __asm__ ("eieio"); - - /* Try to fill Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - } - - return length; -} - -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ - -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -#define FEC_RESET_DELAY 50 - -#if defined(CONFIG_RMII) - -static inline void fec_10Mbps(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - int fecidx = efis->ether_index; - uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008; - - if ((unsigned int)fecidx >= 2) - hang(); - - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask; -} - -static inline void fec_100Mbps(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - int fecidx = efis->ether_index; - uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008; - - if ((unsigned int)fecidx >= 2) - hang(); - - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask; -} - -#endif - -static inline void fec_full_duplex(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - - fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT; - fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */ -} - -static inline void fec_half_duplex(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - - fecp->fec_r_cntrl |= FEC_RCNTRL_DRT; - fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */ -} - -static void fec_pin_init(int fecidx) -{ - bd_t *bd = gd->bd; - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - /* - * Set MII speed to 2.5 MHz or slightly below. - * - * According to the MPC860T (Rev. D) Fast ethernet controller user - * manual (6.2.14), - * the MII management interface clock must be less than or equal - * to 2.5 MHz. - * This MDC frequency is equal to system clock / (2 * MII_SPEED). - * Then MII_SPEED = system_clock / 2 * 2,5 MHz. - * - * All MII configuration is done via FEC1 registers: - */ - immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; - -#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) - /* use MDC for MII */ - immr->im_ioport.iop_pdpar |= 0x0080; - immr->im_ioport.iop_pddir &= ~0x0080; -#endif - - if (fecidx == 0) { -#if defined(CONFIG_ETHER_ON_FEC1) - -#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ - -#if !defined(CONFIG_RMII) - - immr->im_ioport.iop_papar |= 0xf830; - immr->im_ioport.iop_padir |= 0x0830; - immr->im_ioport.iop_padir &= ~0xf000; - - immr->im_cpm.cp_pbpar |= 0x00001001; - immr->im_cpm.cp_pbdir &= ~0x00001001; - - immr->im_ioport.iop_pcpar |= 0x000c; - immr->im_ioport.iop_pcdir &= ~0x000c; - - immr->im_cpm.cp_pepar |= 0x00000003; - immr->im_cpm.cp_pedir |= 0x00000003; - immr->im_cpm.cp_peso &= ~0x00000003; - - immr->im_cpm.cp_cptr &= ~0x00000100; - -#else - -#if !defined(CONFIG_FEC1_PHY_NORXERR) - immr->im_ioport.iop_papar |= 0x1000; - immr->im_ioport.iop_padir &= ~0x1000; -#endif - immr->im_ioport.iop_papar |= 0xe810; - immr->im_ioport.iop_padir |= 0x0810; - immr->im_ioport.iop_padir &= ~0xe000; - - immr->im_cpm.cp_pbpar |= 0x00000001; - immr->im_cpm.cp_pbdir &= ~0x00000001; - - immr->im_cpm.cp_cptr |= 0x00000100; - immr->im_cpm.cp_cptr &= ~0x00000050; - -#endif /* !CONFIG_RMII */ - -#else - /* - * Configure all of port D for MII. - */ - immr->im_ioport.iop_pdpar = 0x1fff; - - /* - * Bits moved from Rev. D onward - */ - if ((get_immr(0) & 0xffff) < 0x0501) - immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ - else - immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ -#endif - -#endif /* CONFIG_ETHER_ON_FEC1 */ - } else if (fecidx == 1) { - -#if defined(CONFIG_ETHER_ON_FEC2) - -#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ - -#if !defined(CONFIG_RMII) - immr->im_cpm.cp_pepar |= 0x0003fffc; - immr->im_cpm.cp_pedir |= 0x0003fffc; - immr->im_cpm.cp_peso &= ~0x000087fc; - immr->im_cpm.cp_peso |= 0x00037800; - - immr->im_cpm.cp_cptr &= ~0x00000080; -#else - -#if !defined(CONFIG_FEC2_PHY_NORXERR) - immr->im_cpm.cp_pepar |= 0x00000010; - immr->im_cpm.cp_pedir |= 0x00000010; - immr->im_cpm.cp_peso &= ~0x00000010; -#endif - immr->im_cpm.cp_pepar |= 0x00039620; - immr->im_cpm.cp_pedir |= 0x00039620; - immr->im_cpm.cp_peso |= 0x00031000; - immr->im_cpm.cp_peso &= ~0x00008620; - - immr->im_cpm.cp_cptr |= 0x00000080; - immr->im_cpm.cp_cptr &= ~0x00000028; -#endif /* CONFIG_RMII */ - -#endif /* CONFIG_MPC885_FAMILY */ - -#endif /* CONFIG_ETHER_ON_FEC2 */ - - } -} - -static int fec_reset(volatile fec_t *fecp) -{ - int i; - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) - return -1; - - return 0; -} - -static int fec_init (struct eth_device *dev, bd_t * bd) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile fec_t *fecp = - (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); - int i; - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - /* the MII interface is connected to FEC1 - * so for the miiphy_xxx function to work we must - * call mii_init since fec_halt messes the thing up - */ - if (efis->ether_index != 0) - __mii_init(); -#endif - - if (fec_reset(fecp) < 0) - printf ("FEC_RESET_DELAY timeout\n"); - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffc0; - - /* No need to set the IVEC register */ - - /* Set station address - */ -#define ea dev->enetaddr - fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->fec_addr_high = (ea[4] << 8) | (ea[5]); -#undef ea - -#if defined(CONFIG_CMD_CDP) - /* - * Turn on multicast address hash table - */ - fecp->fec_hash_table_high = 0xffffffff; - fecp->fec_hash_table_low = 0xffffffff; -#else - /* Clear multicast address hash table - */ - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; -#endif - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - - /* Set maximum frame length - */ - fecp->fec_r_hash = PKT_MAXBUF_SIZE; - - /* - * Setup Buffers and Buffer Desriptors - */ - rxIdx = 0; - txIdx = 0; - - if (!rtx) - rtx = (RTXBD *)(immr->im_cpm.cp_dpmem + CPM_FEC_BASE); - /* - * Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: - * Empty, Wrap - */ - for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i]; - } - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: - * Last, Tx CRC - */ - for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); - } - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* Set receive and transmit descriptor base - */ - fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]); - fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]); - - /* Enable MII mode - */ -#if 0 /* Full duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; - fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; -#else /* Half duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; - fecp->fec_x_cntrl = 0; -#endif - - /* Enable big endian and don't care about SDMA FC. - */ - fecp->fec_fun_code = 0x78000000; - - /* - * Setup the pin configuration of the FEC - */ - fec_pin_init (efis->ether_index); - - rxIdx = 0; - txIdx = 0; - - /* - * Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; - - if (efis->phy_addr == -1) { -#ifdef CONFIG_SYS_DISCOVER_PHY - /* - * wait for the PHY to wake up after reset - */ - efis->actual_phy_addr = mii_discover_phy (dev); - - if (efis->actual_phy_addr == -1) { - printf ("Unable to discover phy!\n"); - return -1; - } -#else - efis->actual_phy_addr = -1; -#endif - } else { - efis->actual_phy_addr = efis->phy_addr; - } - -#if defined(CONFIG_MII) && defined(CONFIG_RMII) - /* - * adapt the RMII speed to the speed of the phy - */ - if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) { - fec_100Mbps (dev); - } else { - fec_10Mbps (dev); - } -#endif - -#if defined(CONFIG_MII) - /* - * adapt to the half/full speed settings - */ - if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) { - fec_full_duplex (dev); - } else { - fec_half_duplex (dev); - } -#endif - - /* And last, try to fill Rx Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - - efis->initialized = 1; - - return 0; -} - - -static void fec_halt(struct eth_device* dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - int i; - - /* avoid halt if initialized; mii gets stuck otherwise */ - if (!efis->initialized) - return; - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return; - } - - efis->initialized = 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - -/* Make MII read/write commands for the FEC. -*/ - -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* PHY identification - */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */ -#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */ - -/* send command to phy using mii, wait for result */ -static uint -mii_send(uint mii_cmd) -{ - uint mii_reply; - volatile fec_t *ep; - int cnt; - - ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec); - - ep->fec_mii_data = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - cnt = 0; - while (!(ep->fec_ievent & FEC_ENET_MII)) { - if (++cnt > 1000) { - printf("mii_send STUCK!\n"); - break; - } - } - mii_reply = ep->fec_mii_data; /* result from phy */ - ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */ -#if 0 - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply); -#endif - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif - -#if defined(CONFIG_SYS_DISCOVER_PHY) -static int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - uint phyno; - int pass; - uint phytype; - int phyaddr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type ", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype |= mii_send(mk_mii_read(phyno, - MII_PHYSID1)) << 16; - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ",phyno,pass); - switch (phytype & 0xfffffff0) { - case PHY_ID_LXT970: - printf("LXT970\n"); - break; - case PHY_ID_LXT971: - printf("LXT971\n"); - break; - case PHY_ID_82555: - printf("82555\n"); - break; - case PHY_ID_QS6612: - printf("QS6612\n"); - break; - case PHY_ID_AMD79C784: - printf("AMD79C784\n"); - break; - case PHY_ID_LSI80225B: - printf("LSI L80225/B\n"); - break; - case PHY_ID_DM9161: - printf("Davicom DM9161\n"); - break; - case PHY_ID_KSM8995M: - printf("MICREL KS8995M\n"); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) { - printf("No PHY device found.\n"); - } - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII) - -/**************************************************************************** - * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -static void __mii_init(void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile fec_t *fecp = &(immr->im_cpm.cp_fec); - - if (fec_reset(fecp) < 0) - printf ("FEC_RESET_DELAY timeout\n"); - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffc0; - - /* Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; -} - -void mii_init (void) -{ - int i; - - __mii_init(); - - /* Setup the pin configuration of the FEC(s) - */ - for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) - fec_pin_init(ether_fcc_info[i].ether_index); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg) -{ - unsigned short value = 0; - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - value = rdreg; -#ifdef MII_DEBUG - printf ("0x%04x\n", value); -#endif - return value; -} - -int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg, - u16 value) -{ -#ifdef MII_DEBUG - printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - (void)mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf ("0x%04x\n", value); -#endif - return 0; -} -#endif - -#endif diff --git a/arch/powerpc/cpu/mpc8xx/fec.h b/arch/powerpc/cpu/mpc8xx/fec.h deleted file mode 100644 index e025c3f464..0000000000 --- a/arch/powerpc/cpu/mpc8xx/fec.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _FEC_H_ -#define _FEC_H_ - - -#endif /* _FEC_H_ */ diff --git a/arch/powerpc/cpu/mpc8xx/interrupts.c b/arch/powerpc/cpu/mpc8xx/interrupts.c deleted file mode 100644 index 482ceecb9f..0000000000 --- a/arch/powerpc/cpu/mpc8xx/interrupts.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> -#include <mpc8xx_irq.h> -#include <asm/processor.h> -#include <commproc.h> - -/************************************************************************/ - -/* - * CPM interrupt vector functions. - */ -struct interrupt_action { - interrupt_handler_t *handler; - void *arg; -}; - -static struct interrupt_action cpm_vecs[CPMVEC_NR]; -static struct interrupt_action irq_vecs[NR_IRQS]; - -static void cpm_interrupt_init (void); -static void cpm_interrupt (void *regs); - -/************************************************************************/ - -int interrupt_init_cpu (unsigned *decrementer_count) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - *decrementer_count = get_tbclk () / CONFIG_SYS_HZ; - - /* disable all interrupts */ - immr->im_siu_conf.sc_simask = 0; - - /* Configure CPM interrupts */ - cpm_interrupt_init (); - - return (0); -} - -/************************************************************************/ - -/* - * Handle external interrupts - */ -void external_interrupt (struct pt_regs *regs) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - int irq; - ulong simask, newmask; - ulong vec, v_bit; - - /* - * read the SIVEC register and shift the bits down - * to get the irq number - */ - vec = immr->im_siu_conf.sc_sivec; - irq = vec >> 26; - v_bit = 0x80000000UL >> irq; - - /* - * Read Interrupt Mask Register and Mask Interrupts - */ - simask = immr->im_siu_conf.sc_simask; - newmask = simask & (~(0xFFFF0000 >> irq)); - immr->im_siu_conf.sc_simask = newmask; - - if (!(irq & 0x1)) { /* External Interrupt ? */ - ulong siel; - - /* - * Read Interrupt Edge/Level Register - */ - siel = immr->im_siu_conf.sc_siel; - - if (siel & v_bit) { /* edge triggered interrupt ? */ - /* - * Rewrite SIPEND Register to clear interrupt - */ - immr->im_siu_conf.sc_sipend = v_bit; - } - } - - if (irq_vecs[irq].handler != NULL) { - irq_vecs[irq].handler (irq_vecs[irq].arg); - } else { - printf ("\nBogus External Interrupt IRQ %d Vector %ld\n", - irq, vec); - /* turn off the bogus interrupt to avoid it from now */ - simask &= ~v_bit; - } - /* - * Re-Enable old Interrupt Mask - */ - immr->im_siu_conf.sc_simask = simask; -} - -/************************************************************************/ - -/* - * CPM interrupt handler - */ -static void cpm_interrupt (void *regs) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - uint vec; - - /* - * Get the vector by setting the ACK bit - * and then reading the register. - */ - immr->im_cpic.cpic_civr = 1; - vec = immr->im_cpic.cpic_civr; - vec >>= 11; - - if (cpm_vecs[vec].handler != NULL) { - (*cpm_vecs[vec].handler) (cpm_vecs[vec].arg); - } else { - immr->im_cpic.cpic_cimr &= ~(1 << vec); - printf ("Masking bogus CPM interrupt vector 0x%x\n", vec); - } - /* - * After servicing the interrupt, - * we have to remove the status indicator. - */ - immr->im_cpic.cpic_cisr |= (1 << vec); -} - -/* - * The CPM can generate the error interrupt when there is a race - * condition between generating and masking interrupts. All we have - * to do is ACK it and return. This is a no-op function so we don't - * need any special tests in the interrupt handler. - */ -static void cpm_error_interrupt (void *dummy) -{ -} - -/************************************************************************/ -/* - * Install and free an interrupt handler - */ -void irq_install_handler (int vec, interrupt_handler_t * handler, - void *arg) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - if ((vec & CPMVEC_OFFSET) != 0) { - /* CPM interrupt */ - vec &= 0xffff; - if (cpm_vecs[vec].handler != NULL) { - printf ("CPM interrupt 0x%x replacing 0x%x\n", - (uint) handler, - (uint) cpm_vecs[vec].handler); - } - cpm_vecs[vec].handler = handler; - cpm_vecs[vec].arg = arg; - immr->im_cpic.cpic_cimr |= (1 << vec); -#if 0 - printf ("Install CPM interrupt for vector %d ==> %p\n", - vec, handler); -#endif - } else { - /* SIU interrupt */ - if (irq_vecs[vec].handler != NULL) { - printf ("SIU interrupt %d 0x%x replacing 0x%x\n", - vec, - (uint) handler, - (uint) cpm_vecs[vec].handler); - } - irq_vecs[vec].handler = handler; - irq_vecs[vec].arg = arg; - immr->im_siu_conf.sc_simask |= 1 << (31 - vec); -#if 0 - printf ("Install SIU interrupt for vector %d ==> %p\n", - vec, handler); -#endif - } -} - -void irq_free_handler (int vec) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - if ((vec & CPMVEC_OFFSET) != 0) { - /* CPM interrupt */ - vec &= 0xffff; -#if 0 - printf ("Free CPM interrupt for vector %d ==> %p\n", - vec, cpm_vecs[vec].handler); -#endif - immr->im_cpic.cpic_cimr &= ~(1 << vec); - cpm_vecs[vec].handler = NULL; - cpm_vecs[vec].arg = NULL; - } else { - /* SIU interrupt */ -#if 0 - printf ("Free CPM interrupt for vector %d ==> %p\n", - vec, cpm_vecs[vec].handler); -#endif - immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec)); - irq_vecs[vec].handler = NULL; - irq_vecs[vec].arg = NULL; - } -} - -/************************************************************************/ - -static void cpm_interrupt_init (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - /* - * Initialize the CPM interrupt controller. - */ - - immr->im_cpic.cpic_cicr = - (CICR_SCD_SCC4 | - CICR_SCC_SCC3 | - CICR_SCB_SCC2 | - CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK; - - immr->im_cpic.cpic_cimr = 0; - - /* - * Install the error handler. - */ - irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL); - - immr->im_cpic.cpic_cicr |= CICR_IEN; - - /* - * Install the cpm interrupt handler - */ - irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL); -} - -/************************************************************************/ - -/* - * timer_interrupt - gets called when the decrementer overflows, - * with interrupts disabled. - * Trivial implementation - no need to be really accurate. - */ -void timer_interrupt_cpu (struct pt_regs *regs) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - -#if 0 - printf ("*** Timer Interrupt *** "); -#endif - /* Reset Timer Expired and Timers Interrupt Status */ - immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; - __asm__ ("nop"); - /* - Clear TEXPS (and TMIST on older chips). SPLSS (on older - chips) is cleared too. - - Bitwise OR is a read-modify-write operation so ALL bits - which are cleared by writing `1' would be cleared by - operations like - - immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS; - - The same can be achieved by simple writing of the PLPRCR - to itself. If a bit value should be preserved, read the - register, ZERO the bit and write, not OR, the result back. - */ - immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr; -} - -/************************************************************************/ diff --git a/arch/powerpc/cpu/mpc8xx/kgdb.S b/arch/powerpc/cpu/mpc8xx/kgdb.S deleted file mode 100644 index 0ea1a06c7a..0000000000 --- a/arch/powerpc/cpu/mpc8xx/kgdb.S +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <command.h> -#include <mpc8xx.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> - -#if defined(CONFIG_CMD_KGDB) - - /* - * cache flushing routines for kgdb - */ - - .globl kgdb_flush_cache_all -kgdb_flush_cache_all: - lis r3, IDC_INVALL@h - mtspr DC_CST, r3 - sync - lis r3, IDC_INVALL@h - mtspr IC_CST, r3 - SYNC - blr - - .globl kgdb_flush_cache_range -kgdb_flush_cache_range: - li r5,CONFIG_SYS_CACHELINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT - beqlr - mtctr r4 - mr r6,r3 -1: dcbst 0,r3 - addi r3,r3,CONFIG_SYS_CACHELINE_SIZE - bdnz 1b - sync /* wait for dcbst's to get to ram */ - mtctr r4 -2: icbi 0,r6 - addi r6,r6,CONFIG_SYS_CACHELINE_SIZE - bdnz 2b - SYNC - blr - -#endif diff --git a/arch/powerpc/cpu/mpc8xx/plprcr_write.S b/arch/powerpc/cpu/mpc8xx/plprcr_write.S deleted file mode 100644 index e28292f5e2..0000000000 --- a/arch/powerpc/cpu/mpc8xx/plprcr_write.S +++ /dev/null @@ -1,119 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mpc8xx.h> -#include <ppc_asm.tmpl> -#include <asm/cache.h> - -#define CACHE_CMD_ENABLE 0x02000000 -#define CACHE_CMD_DISABLE 0x04000000 -#define CACHE_CMD_LOAD_LOCK 0x06000000 -#define CACHE_CMD_UNLOCK_LINE 0x08000000 -#define CACHE_CMD_UNLOCK_ALL 0x0A000000 -#define CACHE_CMD_INVALIDATE 0x0C000000 -#define SPEED_PLPRCR_WAIT_5CYC 150 -#define _CACHE_ALIGN_SIZE 16 - - - .text - .align 2 - .globl plprcr_write_866 - -/* - * void plprcr_write_866 (long plprcr) - * Write PLPRCR, including workaround for device errata SIU4 and SIU9. - */ - -plprcr_write_866: - mfspr r10, LR /* save the Link Register value */ - - /* turn instruction cache on (no MMU required for instructions) - */ - lis r4, CACHE_CMD_ENABLE@h - ori r4, r4, CACHE_CMD_ENABLE@l - mtspr IC_CST, r4 - isync - - /* clear IC_CST error bits - */ - mfspr r4, IC_CST - - bl plprcr_here - -plprcr_here: - mflr r5 - - /* calculate relocation offset - */ - lis r4, plprcr_here@h - ori r4, r4, plprcr_here@l - sub r5, r5, r4 - - /* calculate first address of this function - */ - lis r6, plprcr_write_866@h - ori r6, r6, plprcr_write_866@l - add r6, r6, r5 - - /* calculate end address of this function - */ - lis r7, plprcr_end@h - ori r7, r7, plprcr_end@l - add r7, r7, r5 - - /* load and lock code addresses - */ - mr r5, r6 - -plprcr_loop: - mtspr IC_ADR, r5 - addi r5, r5, _CACHE_ALIGN_SIZE /* increment by one line */ - - lis r4, CACHE_CMD_LOAD_LOCK@h - ori r4, r4, CACHE_CMD_LOAD_LOCK@l - mtspr IC_CST, r4 - isync - - cmpw r5, r7 - blt plprcr_loop - - /* IC_CST error bits not evaluated - */ - - /* switch PLPRCR - */ - mfspr r4, IMMR /* read IMMR */ - rlwinm r4, r4, 0, 0, 15 /* only high 16 bits count */ - - /* write sequence according to MPC866 Errata - */ - stw r3, PLPRCR(r4) - isync - - lis r3, SPEED_PLPRCR_WAIT_5CYC@h - ori r3, r3, SPEED_PLPRCR_WAIT_5CYC@l - -plprcr_wait: - cmpwi r3, 0 - beq plprcr_wait_end - nop - subi r3, r3, 1 - b plprcr_wait - -plprcr_wait_end: - - /* unlock instruction cache but leave it enabled - */ - lis r4, CACHE_CMD_UNLOCK_ALL@h - ori r4, r4, CACHE_CMD_UNLOCK_ALL@l - mtspr IC_CST, r4 - isync - - mtspr LR, r10 /* restore original Link Register value */ - blr - -plprcr_end: diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c deleted file mode 100644 index 17bcc2fe0a..0000000000 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ /dev/null @@ -1,472 +0,0 @@ -/* - * File: scc.c - * Description: - * Basic ET HW initialization and packet RX/TX routines - * - * NOTE <<<IMPORTANT: PLEASE READ>>>: - * Do not cache Rx/Tx buffers! - */ - -/* - * MPC823 <-> MC68160 Connections: - * - * Setup MPC823 to work with MC68160 Enhanced Ethernet - * Serial Tranceiver as follows: - * - * MPC823 Signal MC68160 Comments - * ------ ------ ------- -------- - * PA-12 ETHTX --------> TX Eth. Port Transmit Data - * PB-18 E_TENA --------> TENA Eth. Transmit Port Enable - * PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock - * PA-13 ETHRX <-------- RX Eth. Port Receive Data - * PC-8 E_RENA <-------- RENA Eth. Receive Enable - * PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock - * PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication - * - * FADS Board Signal MC68160 Comments - * ----------------- ------- -------- - * (BCSR1) ETHEN* --------> CS2 Eth. Port Enable - * (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable - * (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex - * (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back - * - */ - -#include <common.h> -#include <malloc.h> -#include <commproc.h> -#include <net.h> -#include <command.h> - -#if defined(CONFIG_CMD_NET) && defined(SCC_ENET) - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */ - -static char txbuf[DBUF_LENGTH]; - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * SCC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx; - -static int scc_send(struct eth_device *dev, void *packet, int length); -static int scc_recv(struct eth_device* dev); -static int scc_init (struct eth_device* dev, bd_t * bd); -static void scc_halt(struct eth_device* dev); - -int scc_initialize(bd_t *bis) -{ - struct eth_device* dev; - - dev = (struct eth_device*) malloc(sizeof *dev); - memset(dev, 0, sizeof *dev); - - strcpy(dev->name, "SCC"); - dev->iobase = 0; - dev->priv = 0; - dev->init = scc_init; - dev->halt = scc_halt; - dev->send = scc_send; - dev->recv = scc_recv; - - eth_register(dev); - - return 1; -} - -static int scc_send(struct eth_device *dev, void *packet, int length) -{ - int i, j=0; -#if 0 - volatile char *in, *out; -#endif - - /* section 16.9.23.3 - * Wait for ready - */ -#if 0 - while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY); - out = (char *)(rtx->txbd[txIdx].cbd_bufaddr); - in = packet; - for(i = 0; i < length; i++) { - *out++ = *in++; - } - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST); - while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++; - -#ifdef ET_DEBUG - printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc); -#endif - i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */; - - /* wrap around buffer index when necessary */ - if (txIdx >= TX_BUF_CNT) txIdx = 0; -#endif - - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { - udelay (1); /* will also trigger Wd if needed */ - j++; - } - if (j>=TOUT_LOOP) printf("TX not ready\n"); - rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP); - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { - udelay (1); /* will also trigger Wd if needed */ - j++; - } - if (j>=TOUT_LOOP) printf("TX timeout\n"); -#ifdef ET_DEBUG - printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc); -#endif - i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */; - return i; -} - -static int scc_recv (struct eth_device *dev) -{ - int length; - - for (;;) { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { -#ifdef ET_DEBUG - printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc); -#endif - } else { - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[rxIdx], - length - 4); - } - - - /* Give the buffer back to the SCC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = - (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - } - return length; -} - -/************************************************************** - * - * SCC Ethernet Initialization Routine - * - *************************************************************/ - -static int scc_init (struct eth_device *dev, bd_t * bis) -{ - - int i; - scc_enet_t *pram_ptr; - - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]); - - rxIdx = 0; - txIdx = 0; - - if (!rtx) - rtx = (RTXBD *)(immr->im_cpm.cp_dpmem + CPM_SCC_BASE); - -#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD)) - /* Configure port A pins for Txd and Rxd. - */ - immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD); - immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD); - immr->im_ioport.iop_paodr &= ~PA_ENET_TXD; -#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD)) - /* Configure port B pins for Txd and Rxd. - */ - immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD); - immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD); - immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD; -#else -#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined -#endif - -#if defined(PC_ENET_LBK) - /* Configure port C pins to disable External Loopback - */ - immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK; - immr->im_ioport.iop_pcdir |= PC_ENET_LBK; - immr->im_ioport.iop_pcso &= ~PC_ENET_LBK; - immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ -#endif /* PC_ENET_LBK */ - - /* Configure port C pins to enable CLSN and RENA. - */ - immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); - - /* Configure port A for TCLK and RCLK. - */ - immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); - immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); - - /* - * Configure Serial Interface clock routing -- see section 16.7.5.3 - * First, clear all SCC bits to zero, then set the ones we want. - */ - - immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK; - immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT; - - - /* - * Initialize SDCR -- see section 16.9.23.7 - * SDMA configuration register - */ - immr->im_siu_conf.sc_sdcr = 0x01; - - - /* - * Setup SCC Ethernet Parameter RAM - */ - - pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */ - pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */ - - pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */ - - pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */ - pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */ - - /* - * Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: - * Empty, Wrap - */ - - for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i]; - } - - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: - * Add PADs to Short FRAMES, Wrap, Last, Tx CRC - */ - - for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = - (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC); - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); - } - - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* - * Enter Command: Initialize Rx Params for SCC - */ - - do { /* Spin until ready to issue command */ - __asm__ ("eieio"); - } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); - /* Issue command */ - immr->im_cpm.cp_cpcr = - ((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG); - do { /* Spin until command processed */ - __asm__ ("eieio"); - } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); - - /* - * Ethernet Specific Parameter RAM - * see table 13-16, pg. 660, - * pg. 681 (example with suggested settings) - */ - - pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */ - pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */ - pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */ - pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */ - pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */ - pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */ - - pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */ - pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */ - pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */ - - pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */ - pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */ - - pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */ - pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */ - pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */ - pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */ - -#define ea eth_get_ethaddr() - pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4]; - pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2]; - pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0]; -#undef ea - - pram_ptr->sen_pper = 0x0; /* Persistence (unused) */ - pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */ - pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */ - pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */ - pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */ - pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */ - pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */ - pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */ - - /* - * Enter Command: Initialize Tx Params for SCC - */ - - do { /* Spin until ready to issue command */ - __asm__ ("eieio"); - } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); - /* Issue command */ - immr->im_cpm.cp_cpcr = - ((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG); - do { /* Spin until command processed */ - __asm__ ("eieio"); - } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); - - /* - * Mask all Events in SCCM - we use polling mode - */ - immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0; - - /* - * Clear Events in SCCE -- Clear bits by writing 1's - */ - - immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0); - - - /* - * Initialize GSMR High 32-Bits - * Settings: Normal Mode - */ - - immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0; - - /* - * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive - * Settings: - * TCI = Invert - * TPL = 48 bits - * TPP = Repeating 10's - * MODE = Ethernet - */ - - immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI | - SCC_GSMRL_TPL_48 | - SCC_GSMRL_TPP_10 | - SCC_GSMRL_MODE_ENET); - - /* - * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4 - */ - - immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555; - - /* - * Initialize the PSMR - * Settings: - * CRC = 32-Bit CCITT - * NIB = Begin searching for SFD 22 bits after RENA - * FDE = Full Duplex Enable - * LPB = Loopback Enable (Needed when FDE is set) - * BRO = Reject broadcast packets - * PROMISCOUS = Catch all packets regardless of dest. MAC adress - */ - immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC | - SCC_PSMR_NIB22 | -#if defined(CONFIG_SCC_ENET_FULL_DUPLEX) - SCC_PSMR_FDE | SCC_PSMR_LPB | -#endif -#if defined(CONFIG_SCC_ENET_NO_BROADCAST) - SCC_PSMR_BRO | -#endif -#if defined(CONFIG_SCC_ENET_PROMISCOUS) - SCC_PSMR_PRO | -#endif - 0; - - /* - * Configure Ethernet TENA Signal - */ - -#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA)) - immr->im_ioport.iop_pcpar |= PC_ENET_TENA; - immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA)) - immr->im_cpm.cp_pbpar |= PB_ENET_TENA; - immr->im_cpm.cp_pbdir |= PB_ENET_TENA; -#else -#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined -#endif - - /* - * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive - */ - - immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |= - (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - return 1; -} - - -static void scc_halt (struct eth_device *dev) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA); -} - -#if 0 -void restart (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |= - (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -} -#endif -#endif diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c deleted file mode 100644 index b6e12d0d85..0000000000 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ /dev/null @@ -1,676 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <commproc.h> -#include <command.h> -#include <serial.h> -#include <watchdog.h> -#include <linux/compiler.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */ - -#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */ -#define SMC_INDEX 0 -#define PROFF_SMC PROFF_SMC1 -#define CPM_CR_CH_SMC CPM_CR_CH_SMC1 - -#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */ -#define SMC_INDEX 1 -#define PROFF_SMC PROFF_SMC2 -#define CPM_CR_CH_SMC CPM_CR_CH_SMC2 - -#endif /* CONFIG_8xx_CONS_SMCx */ - -#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */ -#define SCC_INDEX 0 -#define PROFF_SCC PROFF_SCC1 -#define CPM_CR_CH_SCC CPM_CR_CH_SCC1 - -#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */ -#define SCC_INDEX 1 -#define PROFF_SCC PROFF_SCC2 -#define CPM_CR_CH_SCC CPM_CR_CH_SCC2 - -#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */ -#define SCC_INDEX 2 -#define PROFF_SCC PROFF_SCC3 -#define CPM_CR_CH_SCC CPM_CR_CH_SCC3 - -#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */ -#define SCC_INDEX 3 -#define PROFF_SCC PROFF_SCC4 -#define CPM_CR_CH_SCC CPM_CR_CH_SCC4 - -#endif /* CONFIG_8xx_CONS_SCCx */ - -#if !defined(CONFIG_SYS_SMC_RXBUFLEN) -#define CONFIG_SYS_SMC_RXBUFLEN 1 -#define CONFIG_SYS_MAXIDLE 0 -#else -#if !defined(CONFIG_SYS_MAXIDLE) -#error "you must define CONFIG_SYS_MAXIDLE" -#endif -#endif - -typedef volatile struct serialbuffer { - cbd_t rxbd; /* Rx BD */ - cbd_t txbd; /* Tx BD */ - uint rxindex; /* index for next character to read */ - volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */ - volatile uchar txbuf; /* tx buffers */ -} serialbuffer_t; - -static void serial_setdivisor(volatile cpm8xx_t *cp) -{ - int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate; - - if(divisor/16>0x1000) { - /* bad divisor, assume 50MHz clock and 9600 baud */ - divisor=(50*1000*1000 + 8*9600)/16/9600; - } - -#ifdef CONFIG_SYS_BRGCLK_PRESCALE - divisor /= CONFIG_SYS_BRGCLK_PRESCALE; -#endif - - if(divisor<=0x1000) { - cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN; - } else { - cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16; - } -} - -#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2)) - -/* - * Minimal serial functions needed to use one of the SMC ports - * as serial console interface. - */ - -static void smc_setbrg (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = &(im->im_cpm); - - /* Set up the baud rate generator. - * See 8xx_io/commproc.c for details. - * - * Wire BRG1 to SMCx - */ - - cp->cp_simode = 0x00000000; - - serial_setdivisor(cp); -} - -static int smc_init (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cpm8xx_t *cp = &(im->im_cpm); -#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850)) - volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport); -#endif - uint dpaddr; - volatile serialbuffer_t *rtx; - - /* initialize pointers to SMC */ - - sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]); - up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC]; -#ifdef CONFIG_SYS_SMC_UCODE_PATCH - up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase]; -#else - /* Disable relocation */ - up->smc_rpbase = 0; -#endif - - /* Disable transmitter/receiver. */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* Enable SDMA. */ - im->im_siu_conf.sc_sdcr = 1; - - /* clear error conditions */ -#ifdef CONFIG_SYS_SDSR - im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR; -#else - im->im_sdma.sdma_sdsr = 0x83; -#endif - - /* clear SDMA interrupt mask */ -#ifdef CONFIG_SYS_SDMR - im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR; -#else - im->im_sdma.sdma_sdmr = 0x00; -#endif - -#if defined(CONFIG_8xx_CONS_SMC1) - /* Use Port B for SMC1 instead of other functions. */ - cp->cp_pbpar |= 0x000000c0; - cp->cp_pbdir &= ~0x000000c0; - cp->cp_pbodr &= ~0x000000c0; -#else /* CONFIG_8xx_CONS_SMC2 */ -# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850) - /* Use Port A for SMC2 instead of other functions. */ - ip->iop_papar |= 0x00c0; - ip->iop_padir &= ~0x00c0; - ip->iop_paodr &= ~0x00c0; -# else /* must be a 860 then */ - /* Use Port B for SMC2 instead of other functions. - */ - cp->cp_pbpar |= 0x00000c00; - cp->cp_pbdir &= ~0x00000c00; - cp->cp_pbodr &= ~0x00000c00; -# endif -#endif - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - dpaddr = CPM_SERIAL_BASE; - - rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr]; - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - * damm: allocating space after the two buffers for rx/tx data - */ - - rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf; - rtx->rxbd.cbd_sc = 0; - - rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf; - rtx->txbd.cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; -#if defined (CONFIG_SYS_SMC_UCODE_PATCH) - up->smc_rbptr = up->smc_rbase; - up->smc_tbptr = up->smc_tbase; - up->smc_rstate = 0; - up->smc_tstate = 0; -#endif - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - -#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4 - /* clock source is PLD */ - - /* set freq to 19200 Baud */ - *((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3; - /* configure clk4 as input */ - im->im_ioport.iop_pdpar |= 0x800; - im->im_ioport.iop_pddir &= ~0x800; - - cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000); -#else - /* Set up the baud rate generator */ - smc_setbrg (); -#endif - - /* Make the first buffer the only buffer. */ - rtx->txbd.cbd_sc |= BD_SC_WRAP; - rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* single/multi character receive. */ - up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN; - up->smc_maxidl = CONFIG_SYS_MAXIDLE; - rtx->rxindex = 0; - - /* Initialize Tx/Rx parameters. */ - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - /* Enable transmitter/receiver. */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - - return (0); -} - -static void -smc_putc(const char c) -{ - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - volatile serialbuffer_t *rtx; - - if (c == '\n') - smc_putc ('\r'); - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; -#ifdef CONFIG_SYS_SMC_UCODE_PATCH - up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase]; -#endif - - rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - /* Wait for last character to go. */ - rtx->txbuf = c; - rtx->txbd.cbd_datlen = 1; - rtx->txbd.cbd_sc |= BD_SC_READY; - __asm__("eieio"); - - while (rtx->txbd.cbd_sc & BD_SC_READY) { - WATCHDOG_RESET (); - __asm__("eieio"); - } -} - -static void -smc_puts (const char *s) -{ - while (*s) { - smc_putc (*s++); - } -} - -static int -smc_getc(void) -{ - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - volatile serialbuffer_t *rtx; - unsigned char c; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; -#ifdef CONFIG_SYS_SMC_UCODE_PATCH - up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase]; -#endif - rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - /* Wait for character to show up. */ - while (rtx->rxbd.cbd_sc & BD_SC_EMPTY) - WATCHDOG_RESET (); - - /* the characters are read one by one, - * use the rxindex to know the next char to deliver - */ - c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex); - rtx->rxindex++; - - /* check if all char are readout, then make prepare for next receive */ - if (rtx->rxindex >= rtx->rxbd.cbd_datlen) { - rtx->rxindex = 0; - rtx->rxbd.cbd_sc |= BD_SC_EMPTY; - } - return(c); -} - -static int -smc_tstc(void) -{ - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - volatile serialbuffer_t *rtx; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; -#ifdef CONFIG_SYS_SMC_UCODE_PATCH - up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase]; -#endif - - rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY); -} - -struct serial_device serial_smc_device = -{ - .name = "serial_smc", - .start = smc_init, - .stop = NULL, - .setbrg = smc_setbrg, - .getc = smc_getc, - .tstc = smc_tstc, - .putc = smc_putc, - .puts = smc_puts, -}; - -#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */ - -#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \ - defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4) - -static void -scc_setbrg (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = &(im->im_cpm); - - /* Set up the baud rate generator. - * See 8xx_io/commproc.c for details. - * - * Wire BRG1 to SCCx - */ - - cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX)); - - serial_setdivisor(cp); -} - -static int scc_init (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile scc_t *sp; - volatile scc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp = &(im->im_cpm); - uint dpaddr; -#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850) - volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport); -#endif - - /* initialize pointers to SCC */ - - sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]); - up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC]; - - /* Disable transmitter/receiver. */ - sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - -#if (SCC_INDEX == 2) && defined(CONFIG_MPC850) - /* - * The MPC850 has SCC3 on Port B - */ - cp->cp_pbpar |= 0x06; - cp->cp_pbdir &= ~0x06; - cp->cp_pbodr &= ~0x06; - -#elif (SCC_INDEX < 2) - /* - * Standard configuration for SCC's is on Part A - */ - ip->iop_papar |= ((3 << (2 * SCC_INDEX))); - ip->iop_padir &= ~((3 << (2 * SCC_INDEX))); - ip->iop_paodr &= ~((3 << (2 * SCC_INDEX))); -#endif - - /* Allocate space for two buffer descriptors in the DP ram. */ - dpaddr = dpram_alloc_align(sizeof(cbd_t)*2 + 2, 8); - - /* Enable SDMA. */ - im->im_siu_conf.sc_sdcr = 0x0001; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - - rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf+2); - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; - tbdf->cbd_sc = 0; - - /* Set up the baud rate generator. */ - scc_setbrg (); - - /* Set up the uart parameters in the parameter ram. */ - up->scc_genscc.scc_rbase = dpaddr; - up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t); - - /* Initialize Tx/Rx parameters. */ - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - up->scc_genscc.scc_rfcr = SCC_EB | 0x05; - up->scc_genscc.scc_tfcr = SCC_EB | 0x05; - - up->scc_genscc.scc_mrblr = 1; /* Single character receive */ - up->scc_maxidl = 0; /* disable max idle */ - up->scc_brkcr = 1; /* send one break character on stop TX */ - up->scc_parec = 0; - up->scc_frmec = 0; - up->scc_nosec = 0; - up->scc_brkec = 0; - up->scc_uaddr1 = 0; - up->scc_uaddr2 = 0; - up->scc_toseq = 0; - up->scc_char1 = 0x8000; - up->scc_char2 = 0x8000; - up->scc_char3 = 0x8000; - up->scc_char4 = 0x8000; - up->scc_char5 = 0x8000; - up->scc_char6 = 0x8000; - up->scc_char7 = 0x8000; - up->scc_char8 = 0x8000; - up->scc_rccm = 0xc0ff; - - /* Set low latency / small fifo. */ - sp->scc_gsmrh = SCC_GSMRH_RFW; - - /* Set SCC(x) clock mode to 16x - * See 8xx_io/commproc.c for details. - * - * Wire BRG1 to SCCn - */ - - /* Set UART mode, clock divider 16 on Tx and Rx */ - sp->scc_gsmrl &= ~0xF; - sp->scc_gsmrl |= - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - sp->scc_psmr = 0; - sp->scc_psmr |= SCU_PSMR_CL; - - /* Mask all interrupts and remove anything pending. */ - sp->scc_sccm = 0; - sp->scc_scce = 0xffff; - sp->scc_dsr = 0x7e7e; - sp->scc_psmr = 0x3000; - - /* Make the first buffer the only buffer. */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Enable transmitter/receiver. */ - sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - return (0); -} - -static void -scc_putc(const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; - volatile scc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - - if (c == '\n') - scc_putc ('\r'); - - up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC]; - - tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase]; - - /* Wait for last character to go. */ - - buf = (char *)tbdf->cbd_bufaddr; - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; - __asm__("eieio"); - - while (tbdf->cbd_sc & BD_SC_READY) { - __asm__("eieio"); - WATCHDOG_RESET (); - } -} - -static void -scc_puts (const char *s) -{ - while (*s) { - scc_putc (*s++); - } -} - -static int -scc_getc(void) -{ - volatile cbd_t *rbdf; - volatile unsigned char *buf; - volatile scc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - unsigned char c; - - up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC]; - - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase]; - - /* Wait for character to show up. */ - buf = (unsigned char *)rbdf->cbd_bufaddr; - - while (rbdf->cbd_sc & BD_SC_EMPTY) - WATCHDOG_RESET (); - - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return(c); -} - -static int -scc_tstc(void) -{ - volatile cbd_t *rbdf; - volatile scc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - - up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC]; - - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase]; - - return(!(rbdf->cbd_sc & BD_SC_EMPTY)); -} - -struct serial_device serial_scc_device = -{ - .name = "serial_scc", - .start = scc_init, - .stop = NULL, - .setbrg = scc_setbrg, - .getc = scc_getc, - .tstc = scc_tstc, - .putc = scc_putc, - .puts = scc_puts, -}; - -#endif /* CONFIG_8xx_CONS_SCCx */ - -__weak struct serial_device *default_serial_console(void) -{ -#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) - return &serial_smc_device; -#else - return &serial_scc_device; -#endif -} - -void mpc8xx_serial_initialize(void) -{ -#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) - serial_register(&serial_smc_device); -#endif -#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \ - defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4) - serial_register(&serial_scc_device); -#endif -} - -#if defined(CONFIG_CMD_KGDB) - -void -kgdb_serial_init(void) -{ - int i = -1; - - if (strcmp(default_serial_console()->name, "serial_smc") == 0) - { -#if defined(CONFIG_8xx_CONS_SMC1) - i = 1; -#elif defined(CONFIG_8xx_CONS_SMC2) - i = 2; -#endif - } - else if (strcmp(default_serial_console()->name, "serial_scc") == 0) - { -#if defined(CONFIG_8xx_CONS_SCC1) - i = 1; -#elif defined(CONFIG_8xx_CONS_SCC2) - i = 2; -#elif defined(CONFIG_8xx_CONS_SCC3) - i = 3; -#elif defined(CONFIG_8xx_CONS_SCC4) - i = 4; -#endif - } - - if (i >= 0) - { - serial_printf("[on %s%d] ", default_serial_console()->name, i); - } -} - -void -putDebugChar (int c) -{ - serial_putc (c); -} - -void -putDebugStr (const char *str) -{ - serial_puts (str); -} - -int -getDebugChar (void) -{ - return serial_getc(); -} - -void -kgdb_interruptible (int yes) -{ - return; -} -#endif - -#endif /* CONFIG_8xx_CONS_NONE */ diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c deleted file mode 100644 index e2295d253f..0000000000 --- a/arch/powerpc/cpu/mpc8xx/speed.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG) - -#define PITC_SHIFT 16 -#define PITR_SHIFT 16 -/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */ -#define SPEED_PIT_COUNTS 58 -#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT) -#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT) - -/* Access functions for the Machine State Register */ -static __inline__ unsigned long get_msr(void) -{ - unsigned long msr; - - asm volatile("mfmsr %0" : "=r" (msr) :); - return msr; -} - -static __inline__ void set_msr(unsigned long msr) -{ - asm volatile("mtmsr %0" : : "r" (msr)); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Measure CPU clock speed (core clock GCLK1, GCLK2), - * also determine bus clock speed (checking bus divider factor) - * - * (Approx. GCLK frequency in Hz) - * - * Initializes timer 2 and PIT, but disables them before return. - * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4] - * - * When measuring the CPU clock against the PIT, we count cpu clocks - * for 58/8192 seconds with a prescale divide by 177 for the cpu clock. - * These strange values for the timing interval and prescaling are used - * because the formula for the CPU clock is: - * - * CPU clock = count * (177 * (8192 / 58)) - * - * = count * 24999.7241 - * - * which is very close to - * - * = count * 25000 - * - * Since the count gives the CPU clock divided by 25000, we can get - * the CPU clock rounded to the nearest 0.1 MHz by - * - * CPU clock = ((count + 2) / 4) * 100000; - * - * The rounding is important since the measurement is sometimes going - * to be high or low by 0.025 MHz, depending on exactly how the clocks - * and counters interact. By rounding we get the exact answer for any - * CPU clock that is an even multiple of 0.1 MHz. - */ - -unsigned long measure_gclk(void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer; - ulong timer2_val; - ulong msr_val; - -#ifdef CONFIG_SYS_8XX_XIN - /* dont use OSCM, only use EXTCLK/512 */ - immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV; -#else - immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV); -#endif - - /* Reset + Stop Timer 2, no cascading - */ - timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2); - - /* Keep stopped, halt in debug mode - */ - timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2); - - /* Timer 2 setup: - * Output ref. interrupt disable, int. clock - * Prescale by 177. Note that prescaler divides by value + 1 - * so we must subtract 1 here. - */ - timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN; - - timerp->cpmt_tcn2 = 0; /* reset state */ - timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */ - - /* - * PIT setup: - * - * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz), - * so the count value would be SPEED_PITC_COUNTS - 1. - * But there would be an uncertainty in the start time of 1/4 - * count since when we enable the PIT the count is not - * synchronized to the 32768 Hz oscillator. The trick here is - * to start the count higher and wait until the PIT count - * changes to the required value before starting timer 2. - * - * One count high should be enough, but occasionally the start - * is off by 1 or 2 counts of 32768 Hz. With the start value - * set two counts high it seems very reliable. - */ - - immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */ - immr->im_sit.sit_pitc = SPEED_PITC_INIT; - - immr->im_sitk.sitk_piscrk = KAPWR_KEY; - immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; - - /* - * Start measurement - disable interrupts, just in case - */ - msr_val = get_msr (); - set_msr (msr_val & ~MSR_EE); - - immr->im_sit.sit_piscr |= PISCR_PTE; - - /* spin until get exact count when we want to start */ - while (immr->im_sit.sit_pitr > SPEED_PITC); - - timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */ - while ((immr->im_sit.sit_piscr & PISCR_PS) == 0); - timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */ - - /* re-enable external interrupts if they were on */ - set_msr (msr_val); - - /* Disable timer and PIT - */ - timer2_val = timerp->cpmt_tcn2; /* save before reset timer */ - - timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2); - immr->im_sit.sit_piscr &= ~PISCR_PTE; - -#if defined(CONFIG_SYS_8XX_XIN) - /* not using OSCM, using XIN, so scale appropriately */ - return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L; -#else - return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */ -#endif -} - -#endif - -void get_brgclk(uint sccr) -{ - uint divider = 0; - - switch((sccr&SCCR_DFBRG11)>>11){ - case 0: - divider = 1; - break; - case 1: - divider = 4; - break; - case 2: - divider = 16; - break; - case 3: - divider = 64; - break; - } - gd->arch.brg_clk = gd->cpu_clk/divider; -} - -#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) - -/* - * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ - * or (if it is not defined) measure_gclk() (which uses the ref clock) - * from above. - */ -int get_clocks (void) -{ - uint immr = get_immr (0); /* Return full IMMR contents */ - volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000); - uint sccr = immap->im_clkrst.car_sccr; - /* - * If for some reason measuring the gclk frequency won't - * work, we return the hardwired value. - * (For example, the cogent CMA286-60 CPU module has no - * separate oscillator for PITRTCLK) - */ -#if defined(CONFIG_8xx_GCLK_FREQ) - gd->cpu_clk = CONFIG_8xx_GCLK_FREQ; -#elif defined(CONFIG_8xx_OSCLK) -#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT) - uint pll = immap->im_clkrst.car_plprcr; - uint clk; - - if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */ - clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) * - (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) / - (1<<PLPRCR_val(S)); - } else { - clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1); - } - if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */ - gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7)); - } else { /* High frequency division factor is used */ - gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7)); - } -#else - gd->cpu_clk = measure_gclk(); -#endif /* CONFIG_8xx_GCLK_FREQ */ - - if ((sccr & SCCR_EBDF11) == 0) { - /* No Bus Divider active */ - gd->bus_clk = gd->cpu_clk; - } else { - /* The MPC8xx has only one BDF: half clock speed */ - gd->bus_clk = gd->cpu_clk / 2; - } - - get_brgclk(sccr); - - return (0); -} - -#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */ - -static long init_pll_866 (long clk); - -/* Adjust sdram refresh rate to actual CPU clock. - */ -static int sdram_adjust_866(void) -{ - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - long mamr; - - mamr = immr->im_memctl.memc_mamr; - mamr &= ~MAMR_PTA_MSK; - mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT); - immr->im_memctl.memc_mamr = mamr; - - return 0; -} - -/* - * Adjust sdram refresh rate to actual CPU clock - * and set timebase source according to actual CPU clock - */ -static int adjust_sdram_tbs_8xx(void) -{ -#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) && \ - !defined(CONFIG_TQM885D) - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - long mamr; - long sccr; - - mamr = immr->im_memctl.memc_mamr; - mamr &= ~MAMR_PTA_MSK; - mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT); - immr->im_memctl.memc_mamr = mamr; - - if (gd->cpu_clk < 67000000) { - sccr = immr->im_clkrst.car_sccr; - sccr |= SCCR_TBS; - immr->im_clkrst.car_sccr = sccr; - } -#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */ - - return 0; -} - -/* This function sets up PLL (init_pll_866() is called) and - * fills gd->cpu_clk and gd->bus_clk according to the environment - * variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk' - * contains invalid value). - * This functions requires an MPC866 or newer series CPU. - */ -int get_clocks(void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - char tmp[64]; - long cpuclk = 0; - long sccr_reg; - int ret; - - if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) - cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000; - - if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk)) - cpuclk = CONFIG_8xx_CPUCLK_DEFAULT; - - gd->cpu_clk = init_pll_866 (cpuclk); -#if defined(CONFIG_SYS_MEASURE_CPUCLK) - gd->cpu_clk = measure_gclk (); -#endif - - get_brgclk(immr->im_clkrst.car_sccr); - - /* if cpu clock <= 66 MHz then set bus division factor to 1, - * otherwise set it to 2 - */ - sccr_reg = immr->im_clkrst.car_sccr; - sccr_reg &= ~SCCR_EBDF11; - - if (gd->cpu_clk <= 66000000) { - sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */ - gd->bus_clk = gd->cpu_clk; - } else { - sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */ - gd->bus_clk = gd->cpu_clk / 2; - } - immr->im_clkrst.car_sccr = sccr_reg; - - ret = sdram_adjust_866(); - if (ret) - return ret; - - return adjust_sdram_tbs_8xx(); -} - -/* Configure PLL for MPC866/859/885 CPU series - * PLL multiplication factor is set to the value nearest to the desired clk, - * assuming a oscclk of 10 MHz. - */ -static long init_pll_866 (long clk) -{ - extern void plprcr_write_866 (long); - - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - long n, plprcr; - char mfi, mfn, mfd, s, pdf; - long step_mfi, step_mfn; - - if (clk < 20000000) { - clk *= 2; - pdf = 1; - } else { - pdf = 0; - } - - if (clk < 40000000) { - s = 2; - step_mfi = CONFIG_8xx_OSCLK / 4; - mfd = 7; - step_mfn = CONFIG_8xx_OSCLK / 30; - } else if (clk < 80000000) { - s = 1; - step_mfi = CONFIG_8xx_OSCLK / 2; - mfd = 14; - step_mfn = CONFIG_8xx_OSCLK / 30; - } else { - s = 0; - step_mfi = CONFIG_8xx_OSCLK; - mfd = 29; - step_mfn = CONFIG_8xx_OSCLK / 30; - } - - /* Calculate integer part of multiplication factor - */ - n = clk / step_mfi; - mfi = (char)n; - - /* Calculate numerator of fractional part of multiplication factor - */ - n = clk - (n * step_mfi); - mfn = (char)(n / step_mfn); - - /* Calculate effective clk - */ - n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1); - - immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; - - plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK - | PLPRCR_MFD_MSK | PLPRCR_S_MSK - | PLPRCR_MFI_MSK | PLPRCR_DBRMO - | PLPRCR_PDF_MSK)) - | (mfn << PLPRCR_MFN_SHIFT) - | (mfd << PLPRCR_MFD_SHIFT) - | (s << PLPRCR_S_SHIFT) - | (mfi << PLPRCR_MFI_SHIFT) - | (pdf << PLPRCR_PDF_SHIFT); - - if( (mfn > 0) && ((mfd / mfn) > 10) ) - plprcr |= PLPRCR_DBRMO; - - plprcr_write_866 (plprcr); /* set value using SIU4/9 workaround */ - immr->im_clkrstk.cark_plprcrk = 0x00000000; - - return (n); -} - -#endif /* CONFIG_8xx_CPUCLK_DEFAULT */ diff --git a/arch/powerpc/cpu/mpc8xx/spi.c b/arch/powerpc/cpu/mpc8xx/spi.c deleted file mode 100644 index 35b425e7c1..0000000000 --- a/arch/powerpc/cpu/mpc8xx/spi.c +++ /dev/null @@ -1,533 +0,0 @@ -/* - * Copyright (c) 2001 Navin Boppuri / Prashant Patel - * <nboppuri@trinetcommunication.com>, - * <pmpatel@trinetcommunication.com> - * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de> - * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC8xx CPM SPI interface. - * - * Parts of this code are probably not portable and/or specific to - * the board which I used for the tests. Please send fixes/complaints - * to wd@denx.de - * - */ - -#include <common.h> -#include <mpc8xx.h> -#include <commproc.h> -#include <linux/ctype.h> -#include <malloc.h> -#include <post.h> -#include <serial.h> - -#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI) - -/* Warning: - * You cannot enable DEBUG for early system initalization, i. e. when - * this driver is used to read environment parameters like "baudrate" - * from EEPROM which are used to initialize the serial port which is - * needed to print the debug messages... - */ -#undef DEBUG - -#define SPI_EEPROM_WREN 0x06 -#define SPI_EEPROM_RDSR 0x05 -#define SPI_EEPROM_READ 0x03 -#define SPI_EEPROM_WRITE 0x02 - -/* --------------------------------------------------------------- - * Offset for initial SPI buffers in DPRAM: - * We need a 520 byte scratch DPRAM area to use at an early stage. - * It is used between the two initialization calls (spi_init_f() - * and spi_init_r()). - * The value 0xb00 makes it far enough from the start of the data - * area (as well as from the stack pointer). - * --------------------------------------------------------------- */ -#ifndef CONFIG_SYS_SPI_INIT_OFFSET -#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00 -#endif - -#ifdef DEBUG - -#define DPRINT(a) printf a; -/* ----------------------------------------------- - * Helper functions to peek into tx and rx buffers - * ----------------------------------------------- */ -static const char * const hex_digit = "0123456789ABCDEF"; - -static char quickhex (int i) -{ - return hex_digit[i]; -} - -static void memdump (void *pv, int num) -{ - int i; - unsigned char *pc = (unsigned char *) pv; - - for (i = 0; i < num; i++) - printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f)); - printf ("\t"); - for (i = 0; i < num; i++) - printf ("%c", isprint (pc[i]) ? pc[i] : '.'); - printf ("\n"); -} -#else /* !DEBUG */ - -#define DPRINT(a) - -#endif /* DEBUG */ - -/* ------------------- - * Function prototypes - * ------------------- */ -void spi_init (void); - -ssize_t spi_read (uchar *, int, uchar *, int); -ssize_t spi_write (uchar *, int, uchar *, int); -ssize_t spi_xfer (size_t); - -/* ------------------- - * Variables - * ------------------- */ - -#define MAX_BUFFER 0x104 - -/* ---------------------------------------------------------------------- - * Initially we place the RX and TX buffers at a fixed location in DPRAM! - * ---------------------------------------------------------------------- */ -static uchar *rxbuf = - (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem - [CONFIG_SYS_SPI_INIT_OFFSET]; -static uchar *txbuf = - (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem - [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER]; - -/* ************************************************************************** - * - * Function: spi_init_f - * - * Description: Init SPI-Controller (ROM part) - * - * return: --- - * - * *********************************************************************** */ -void spi_init_f (void) -{ - unsigned int dpaddr; - - volatile spi_t *spi; - volatile immap_t *immr; - volatile cpm8xx_t *cp; - volatile cbd_t *tbdf, *rbdf; - - immr = (immap_t *) CONFIG_SYS_IMMR; - cp = (cpm8xx_t *) &immr->im_cpm; - -#ifdef CONFIG_SYS_SPI_UCODE_PATCH - spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase]; -#else - spi = (spi_t *)&cp->cp_dparam[PROFF_SPI]; - /* Disable relocation */ - spi->spi_rpbase = 0; -#endif - -/* 1 */ - /* ------------------------------------------------ - * Initialize Port B SPI pins -> page 34-8 MPC860UM - * (we are only in Master Mode !) - * ------------------------------------------------ */ - - /* -------------------------------------------- - * GPIO or per. Function - * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO) - * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI) - * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK) - * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM) - * -------------------------------------------- */ - cp->cp_pbpar |= 0x0000000E; /* set bits */ - cp->cp_pbpar &= ~0x00000001; /* reset bit */ - - /* ---------------------------------------------- - * In/Out or per. Function 0/1 - * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO - * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI - * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK - * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM - * ---------------------------------------------- */ - cp->cp_pbdir |= 0x0000000F; - - /* ---------------------------------------------- - * open drain or active output - * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO - * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI - * PBODR[30] = 0 [0x00000002] -> active output: SPICLK - * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM - * ---------------------------------------------- */ - - cp->cp_pbodr |= 0x00000008; - cp->cp_pbodr &= ~0x00000007; - - /* Initialize the parameter ram. - * We need to make sure many things are initialized to zero - */ - spi->spi_rstate = 0; - spi->spi_rdp = 0; - spi->spi_rbptr = 0; - spi->spi_rbc = 0; - spi->spi_rxtmp = 0; - spi->spi_tstate = 0; - spi->spi_tdp = 0; - spi->spi_tbptr = 0; - spi->spi_tbc = 0; - spi->spi_txtmp = 0; - - dpaddr = CPM_SPI_BASE; - -/* 3 */ - /* Set up the SPI parameters in the parameter ram */ - spi->spi_rbase = dpaddr; - spi->spi_tbase = dpaddr + sizeof (cbd_t); - - /***********IMPORTANT******************/ - - /* - * Setting transmit and receive buffer descriptor pointers - * initially to rbase and tbase. Only the microcode patches - * documentation talks about initializing this pointer. This - * is missing from the sample I2C driver. If you dont - * initialize these pointers, the kernel hangs. - */ - spi->spi_rbptr = spi->spi_rbase; - spi->spi_tbptr = spi->spi_tbase; - -/* 4 */ -#ifdef CONFIG_SYS_SPI_UCODE_PATCH - /* - * Initialize required parameters if using microcode patch. - */ - spi->spi_rstate = 0; - spi->spi_tstate = 0; -#else - /* Init SPI Tx + Rx Parameters */ - while (cp->cp_cpcr & CPM_CR_FLG) - ; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG) - ; -#endif /* CONFIG_SYS_SPI_UCODE_PATCH */ - -/* 5 */ - /* Set SDMA configuration register */ - immr->im_siu_conf.sc_sdcr = 0x0001; - -/* 6 */ - /* Set to big endian. */ - spi->spi_tfcr = SMC_EB; - spi->spi_rfcr = SMC_EB; - -/* 7 */ - /* Set maximum receive size. */ - spi->spi_mrblr = MAX_BUFFER; - -/* 8 + 9 */ - /* tx and rx buffer descriptors */ - tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase]; - rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase]; - - tbdf->cbd_sc &= ~BD_SC_READY; - rbdf->cbd_sc &= ~BD_SC_EMPTY; - - /* Set the bd's rx and tx buffer address pointers */ - rbdf->cbd_bufaddr = (ulong) rxbuf; - tbdf->cbd_bufaddr = (ulong) txbuf; - -/* 10 + 11 */ - cp->cp_spim = 0; /* Mask all SPI events */ - cp->cp_spie = SPI_EMASK; /* Clear all SPI events */ - - return; -} - -/* ************************************************************************** - * - * Function: spi_init_r - * - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * - * return: --- - * - * *********************************************************************** */ -void spi_init_r (void) -{ - volatile cpm8xx_t *cp; - volatile spi_t *spi; - volatile immap_t *immr; - volatile cbd_t *tbdf, *rbdf; - - immr = (immap_t *) CONFIG_SYS_IMMR; - cp = (cpm8xx_t *) &immr->im_cpm; - -#ifdef CONFIG_SYS_SPI_UCODE_PATCH - spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase]; -#else - spi = (spi_t *)&cp->cp_dparam[PROFF_SPI]; - /* Disable relocation */ - spi->spi_rpbase = 0; -#endif - - /* tx and rx buffer descriptors */ - tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase]; - rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase]; - - /* Allocate memory for RX and TX buffers */ - rxbuf = (uchar *) malloc (MAX_BUFFER); - txbuf = (uchar *) malloc (MAX_BUFFER); - - rbdf->cbd_bufaddr = (ulong) rxbuf; - tbdf->cbd_bufaddr = (ulong) txbuf; - - return; -} - -/**************************************************************************** - * Function: spi_write - **************************************************************************** */ -ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) -{ - int i; - - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - *txbuf = SPI_EEPROM_WREN; /* write enable */ - spi_xfer(1); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */ - memcpy(alen + txbuf, buffer, len); - spi_xfer(alen + len); - /* ignore received data */ - for (i = 0; i < 1000; i++) { - *txbuf = SPI_EEPROM_RDSR; /* read status */ - txbuf[1] = 0; - spi_xfer(2); - if (!(rxbuf[1] & 1)) { - break; - } - udelay(1000); - } - if (i >= 1000) { - printf ("*** spi_write: Time out while writing!\n"); - } - - return len; -} - -/**************************************************************************** - * Function: spi_read - **************************************************************************** */ -ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len) -{ - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_READ; /* READ memory array */ - - /* - * There is a bug in 860T (?) that cuts the last byte of input - * if we're reading into DPRAM. The solution we choose here is - * to always read len+1 bytes (we have one extra byte at the - * end of the buffer). - */ - spi_xfer(alen + len + 1); - memcpy(buffer, alen + rxbuf, len); - - return len; -} - -/**************************************************************************** - * Function: spi_xfer - **************************************************************************** */ -ssize_t spi_xfer (size_t count) -{ - volatile immap_t *immr; - volatile cpm8xx_t *cp; - volatile spi_t *spi; - cbd_t *tbdf, *rbdf; - ushort loop; - int tm; - - DPRINT (("*** spi_xfer entered ***\n")); - - immr = (immap_t *) CONFIG_SYS_IMMR; - cp = (cpm8xx_t *) &immr->im_cpm; - -#ifdef CONFIG_SYS_SPI_UCODE_PATCH - spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase]; -#else - spi = (spi_t *)&cp->cp_dparam[PROFF_SPI]; - /* Disable relocation */ - spi->spi_rpbase = 0; -#endif - - tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase]; - rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase]; - - /* Set CS for device */ - cp->cp_pbdat &= ~0x0001; - - /* Setting tx bd status and data length */ - tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP; - tbdf->cbd_datlen = count; - - DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", - tbdf->cbd_datlen)); - - /* Setting rx bd status and data length */ - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - rbdf->cbd_datlen = 0; /* rx length has no significance */ - - loop = cp->cp_spmode & SPMODE_LOOP; - cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */ - loop | - SPMODE_REV | - SPMODE_MSTR | - SPMODE_EN | - SPMODE_LEN(8) | /* 8 Bits per char */ - SPMODE_PM(0x8) ; /* medium speed */ - cp->cp_spim = 0; /* Mask all SPI events */ - cp->cp_spie = SPI_EMASK; /* Clear all SPI events */ - - /* start spi transfer */ - DPRINT (("*** spi_xfer: Performing transfer ...\n")); - cp->cp_spcom |= SPI_STR; /* Start transmit */ - - /* -------------------------------- - * Wait for SPI transmit to get out - * or time out (1 second = 1000 ms) - * -------------------------------- */ - for (tm=0; tm<1000; ++tm) { - if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */ - DPRINT (("*** spi_xfer: Tx buffer empty\n")); - break; - } - if ((tbdf->cbd_sc & BD_SC_READY) == 0) { - DPRINT (("*** spi_xfer: Tx BD done\n")); - break; - } - udelay (1000); - } - if (tm >= 1000) { - printf ("*** spi_xfer: Time out while xferring to/from SPI!\n"); - } - DPRINT (("*** spi_xfer: ... transfer ended\n")); - -#ifdef DEBUG - printf ("\nspi_xfer: txbuf after xfer\n"); - memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */ - printf ("spi_xfer: rxbuf after xfer\n"); - memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */ - printf ("\n"); -#endif - - /* Clear CS for device */ - cp->cp_pbdat |= 0x0001; - - return count; -} -#endif /* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */ - -/* - * SPI test - * - * The Serial Peripheral Interface (SPI) is tested in the local loopback mode. - * The interface is configured accordingly and several packets - * are transferred. The configurable test parameters are: - * TEST_MIN_LENGTH - minimum size of packet to transfer - * TEST_MAX_LENGTH - maximum size of packet to transfer - * TEST_NUM - number of tests - */ - -#if CONFIG_POST & CONFIG_SYS_POST_SPI - -#define TEST_MIN_LENGTH 1 -#define TEST_MAX_LENGTH MAX_BUFFER -#define TEST_NUM 1 - -static void packet_fill (char * packet, int length) -{ - char c = (char) length; - int i; - - for (i = 0; i < length; i++) - { - packet[i] = c++; - } -} - -static int packet_check (char * packet, int length) -{ - char c = (char) length; - int i; - - for (i = 0; i < length; i++) { - if (packet[i] != c++) return -1; - } - - return 0; -} - -int spi_post_test (int flags) -{ - int res = -1; - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm; - int i; - int l; - - spi_init_f (); - spi_init_r (); - - cp->cp_spmode |= SPMODE_LOOP; - - for (i = 0; i < TEST_NUM; i++) { - for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) { - packet_fill ((char *)txbuf, l); - - spi_xfer (l); - - if (packet_check ((char *)rxbuf, l) < 0) { - goto Done; - } - } - } - - res = 0; - - Done: - - cp->cp_spmode &= ~SPMODE_LOOP; - - /* - * SCC2 parameter RAM space overlaps - * the SPI parameter RAM space. So we need to restore - * the SCC2 configuration if it is used by UART. - */ - -#if !defined(CONFIG_8xx_CONS_NONE) - serial_reinit_all (); -#endif - - if (res != 0) { - post_log ("SPI test failed\n"); - } - - return res; -} -#endif /* CONFIG_POST & CONFIG_SYS_POST_SPI */ diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S deleted file mode 100644 index f8aa93d611..0000000000 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ /dev/null @@ -1,650 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* U-Boot - Startup Code for PowerPC based Embedded Boards - * - * - * The processor starts at 0x00000100 and the code is executed - * from flash. The code is organized to be at an other address - * in memory, but as long we don't jump around before relocating, - * board_init lies at a quite high address and when the cpu has - * jumped there, everything is ok. - * This works because the cpu gives the FLASH (CS0) the whole - * address space at startup, and board_init lies as a echo of - * the flash somewhere up there in the memory map. - * - * board_init will change CS0 to be positioned at the correct - * address and (s)dram will be positioned at address 0 - */ -#include <asm-offsets.h> -#include <config.h> -#include <mpc8xx.h> -#include <version.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> -#include <asm/u-boot.h> - -/* We don't want the MMU yet. -*/ -#undef MSR_KERNEL -#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */ - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * r3 - 1st arg to board_init(): IMMP pointer - * r4 - 2nd arg to board_init(): boot flag - */ - .text - .long 0x27051956 /* U-Boot Magic Number */ - .globl version_string -version_string: - .ascii U_BOOT_VERSION_STRING, "\0" - - . = EXC_OFF_SYS_RESET - .globl _start -_start: - lis r3, CONFIG_SYS_IMMR@h /* position IMMR */ - mtspr 638, r3 - - /* Initialize machine status; enable machine check interrupt */ - /*----------------------------------------------------------------------*/ - li r3, MSR_KERNEL /* Set ME, RI flags */ - mtmsr r3 - mtspr SRR1, r3 /* Make SRR1 match MSR */ - - mfspr r3, ICR /* clear Interrupt Cause Register */ - - /* Initialize debug port registers */ - /*----------------------------------------------------------------------*/ - xor r0, r0, r0 /* Clear R0 */ - mtspr LCTRL1, r0 /* Initialize debug port regs */ - mtspr LCTRL2, r0 - mtspr COUNTA, r0 - mtspr COUNTB, r0 - - /* Reset the caches */ - /*----------------------------------------------------------------------*/ - - mfspr r3, IC_CST /* Clear error bits */ - mfspr r3, DC_CST - - lis r3, IDC_UNALL@h /* Unlock all */ - mtspr IC_CST, r3 - mtspr DC_CST, r3 - - lis r3, IDC_INVALL@h /* Invalidate all */ - mtspr IC_CST, r3 - mtspr DC_CST, r3 - - lis r3, IDC_DISABLE@h /* Disable data cache */ - mtspr DC_CST, r3 - -#if !defined(CONFIG_SYS_DELAYED_ICACHE) - /* On IP860 and PCU E, - * we cannot enable IC yet - */ - lis r3, IDC_ENABLE@h /* Enable instruction cache */ -#endif - mtspr IC_CST, r3 - - /* invalidate all tlb's */ - /*----------------------------------------------------------------------*/ - - tlbia - isync - - /* - * Calculate absolute address in FLASH and jump there - *----------------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_MONITOR_BASE@h - ori r3, r3, CONFIG_SYS_MONITOR_BASE@l - addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET - mtlr r3 - blr - -in_flash: - - /* initialize some SPRs that are hard to access from C */ - /*----------------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_IMMR@h /* pass IMMR as arg1 to C routine */ - ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */ - /* Note: R0 is still 0 here */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* - * Disable serialized ifetch and show cycles - * (i.e. set processor to normal mode). - * This is also a silicon bug workaround, see errata - */ - - li r2, 0x0007 - mtspr ICTRL, r2 - - /* Set up debug mode entry */ - - lis r2, CONFIG_SYS_DER@h - ori r2, r2, CONFIG_SYS_DER@l - mtspr DER, r2 - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable ! */ - /*----------------------------------------------------------------------*/ - - GET_GOT /* initialize GOT access */ - - /* r3: IMMR */ - bl cpu_init_f /* run low-level CPU init code (from Flash) */ - - bl board_init_f /* run 1st part of board init code (from Flash) */ - - /* NOTREACHED - board_init_f() does not return */ - - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. "Never" generated on the 860. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. "Never" generated on the 860. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - - /* No FPU on MPC8xx. This exception is not supposed to happen. - */ - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - /* On the MPC8xx, this is a software emulation interrupt. It occurs - * for all unimplemented and illegal instructions. - */ - STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException) - - STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) - STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) - STD_EXCEPTION(0x1400, DataTLBError, UnknownException) - - STD_EXCEPTION(0x1500, Reserved5, UnknownException) - STD_EXCEPTION(0x1600, Reserved6, UnknownException) - STD_EXCEPTION(0x1700, Reserved7, UnknownException) - STD_EXCEPTION(0x1800, Reserved8, UnknownException) - STD_EXCEPTION(0x1900, Reserved9, UnknownException) - STD_EXCEPTION(0x1a00, ReservedA, UnknownException) - STD_EXCEPTION(0x1b00, ReservedB, UnknownException) - - STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) - STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException) - STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) - STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) - - - .globl _end_of_vectors -_end_of_vectors: - - - . = 0x2000 - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - mtspr SPRG2,r22 /* r1 is now kernel sp */ - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - -/* Cache functions. -*/ - .globl icache_enable -icache_enable: - SYNC - lis r3, IDC_INVALL@h - mtspr IC_CST, r3 - lis r3, IDC_ENABLE@h - mtspr IC_CST, r3 - blr - - .globl icache_disable -icache_disable: - SYNC - lis r3, IDC_DISABLE@h - mtspr IC_CST, r3 - blr - - .globl icache_status -icache_status: - mfspr r3, IC_CST - srwi r3, r3, 31 /* >>31 => select bit 0 */ - blr - - .globl dcache_enable -dcache_enable: -#if 0 - SYNC -#endif -#if 1 - lis r3, 0x0400 /* Set cache mode with MMU off */ - mtspr MD_CTR, r3 -#endif - - lis r3, IDC_INVALL@h - mtspr DC_CST, r3 -#if 0 - lis r3, DC_SFWT@h - mtspr DC_CST, r3 -#endif - lis r3, IDC_ENABLE@h - mtspr DC_CST, r3 - blr - - .globl dcache_disable -dcache_disable: - SYNC - lis r3, IDC_DISABLE@h - mtspr DC_CST, r3 - lis r3, IDC_INVALL@h - mtspr DC_CST, r3 - blr - - .globl dcache_status -dcache_status: - mfspr r3, DC_CST - srwi r3, r3, 31 /* >>31 => select bit 0 */ - blr - - .globl dc_read -dc_read: - mtspr DC_ADR, r3 - mfspr r3, DC_DAT - blr - -/* - * unsigned int get_immr (unsigned int mask) - * - * return (mask ? (IMMR & mask) : IMMR); - */ - .globl get_immr -get_immr: - mr r4,r3 /* save mask */ - mfspr r3, IMMR /* IMMR */ - cmpwi 0,r4,0 /* mask != 0 ? */ - beq 4f - and r3,r3,r4 /* IMMR & mask */ -4: - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - - - .globl wr_ic_cst -wr_ic_cst: - mtspr IC_CST, r3 - blr - - .globl rd_ic_cst -rd_ic_cst: - mfspr r3, IC_CST - blr - - .globl wr_ic_adr -wr_ic_adr: - mtspr IC_ADR, r3 - blr - - - .globl wr_dc_cst -wr_dc_cst: - mtspr DC_CST, r3 - blr - - .globl rd_dc_cst -rd_dc_cst: - mfspr r3, DC_CST - blr - - .globl wr_dc_adr -wr_dc_adr: - mtspr DC_ADR, r3 - blr - -/*------------------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - - la r8,-4(r4) - la r7,-4(r3) -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - b 4f - -2: slwi r0,r0,2 - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - cmpwi r0,0 - add r0,r0,r11 - stw r4,0(r3) - beq- 5f - stw r0,0(r4) -5: bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector always at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mtlr r4 /* restore link register */ - blr diff --git a/arch/powerpc/cpu/mpc8xx/traps.c b/arch/powerpc/cpu/mpc8xx/traps.c deleted file mode 100644 index 01f24ac1a9..0000000000 --- a/arch/powerpc/cpu/mpc8xx/traps.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * linux/arch/powerpc/kernel/traps.c - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modified by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras (paulus@cs.anu.edu.au) - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file handles the architecture-dependent parts of hardware exceptions - */ - -#include <common.h> -#include <command.h> -#include <kgdb.h> -#include <asm/processor.h> - -#if defined(CONFIG_CMD_BEDBUG) -extern void do_bedbug_breakpoint(struct pt_regs *); -#endif - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* THIS NEEDS CHANGING to use the board info structure. -*/ -#define END_OF_MEM 0x02000000 - -/* - * Trap & Exception support - */ - -static void print_backtrace(unsigned long *sp) -{ - int cnt = 0; - unsigned long i; - - printf("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - printf("\n"); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *)*sp; - } - printf("\n"); -} - -void show_regs(struct pt_regs *regs) -{ - int i; - - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", - regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, - regs->msr&MSR_IR ? 1 : 0, - regs->msr&MSR_DR ? 1 : 0); - - printf("\n"); - for (i = 0; i < 32; i++) { - if ((i % 8) == 0) - { - printf("GPR%02d: ", i); - } - - printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) - { - printf("\n"); - } - } -} - - -static void _exception(int signr, struct pt_regs *regs) -{ - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d",regs->nip,signr); -} - -void MachineCheckException(struct pt_regs *regs) -{ - unsigned long fixup; - - /* Probing PCI using config cycles cause this exception - * when a device is not present. Catch it and return to - * the PCI exception handler. - */ - if ((fixup = search_exception_table(regs->nip)) != 0) { - regs->nip = fixup; - return; - } - -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - - printf("Machine check in kernel mode.\n"); - printf("Caused by (from msr): "); - printf("regs %p ",regs); - switch( regs->msr & 0x000F0000) { - case (0x80000000>>12): - printf("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); - break; - case (0x80000000>>13): - printf("Transfer error ack signal\n"); - break; - case (0x80000000>>14): - printf("Data parity signal\n"); - break; - case (0x80000000>>15): - printf("Address parity signal\n"); - break; - default: - printf("Unknown values in msr\n"); - } - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("machine check"); -} - -void AlignmentException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Alignment Exception"); -} - -void ProgramCheckException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Program Check Exception"); -} - -void SoftEmuException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Software Emulation Exception"); -} - - -void UnknownException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", - regs->nip, regs->msr, regs->trap); - _exception(0, regs); -} - -void DebugException(struct pt_regs *regs) -{ - printf("Debugger trap at @ %lx\n", regs->nip ); - show_regs(regs); -#if defined(CONFIG_CMD_BEDBUG) - do_bedbug_breakpoint( regs ); -#endif -} - -/* Probe an address by reading. If not present, return -1, otherwise - * return 0. - */ -int addr_probe(uint *addr) -{ -#if 0 - int retval; - - __asm__ __volatile__( \ - "1: lwz %0,0(%1)\n" \ - " eieio\n" \ - " li %0,0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r" (retval) : "r"(addr)); - - return (retval); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc8xx/upatch.c b/arch/powerpc/cpu/mpc8xx/upatch.c deleted file mode 100644 index a8cb735ab7..0000000000 --- a/arch/powerpc/cpu/mpc8xx/upatch.c +++ /dev/null @@ -1,194 +0,0 @@ -#include <common.h> -#include <commproc.h> - -#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \ - defined(CONFIG_SYS_SMC_UCODE_PATCH) - -static void UcodeCopy (volatile cpm8xx_t *cpm); - -void cpm_load_patch (volatile immap_t *immr) -{ - immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */ - - UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */ -#ifdef CONFIG_SYS_SPI_UCODE_PATCH - { - volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI]; - /* Activate the microcode per the instructions in the microcode manual */ - /* NOTE: We're only relocating the SPI parameters (not I2C). */ - immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */ - immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */ - spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */ - } -#endif - -#ifdef CONFIG_SYS_I2C_UCODE_PATCH - { - volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC]; - /* Activate the microcode per the instructions in the microcode manual */ - /* NOTE: We're only relocating the I2C parameters (not SPI). */ - immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */ - immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */ - iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */ - } -#endif - -#ifdef CONFIG_SYS_SMC_UCODE_PATCH - { - volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1]; - /* Activate the microcode per the instructions in the microcode manual */ - /* NOTE: We're only relocating the SMC parameters. */ - immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */ - immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */ - up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */ - } -#endif - - /* - * Enable DPRAM microcode to execute from the first 512 bytes - * and a 256 byte extension of DPRAM. - */ -#ifdef CONFIG_SYS_SMC_UCODE_PATCH - immr->im_cpm.cp_rccr |= 0x0002; -#else - immr->im_cpm.cp_rccr |= 0x0001; -#endif -} - -#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh) -static ulong patch_2000[] = { - 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000, - 0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7, - 0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330, - 0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF, - 0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7, - 0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE, - 0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23, - 0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE, - 0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA, - 0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3, - 0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD, - 0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3, - 0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3, - 0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB, - 0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C, - 0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637, - 0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8, - 0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A, - 0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522, - 0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9, - 0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8, - 0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78, - 0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08, - 0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF, - 0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD, - 0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD, - 0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E, - 0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B, - 0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD, - 0x7FBDB081, 0x5F8147F8, -}; - -static ulong patch_2F00[] = { - 0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD, - 0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB, - 0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963, - 0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99, - 0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7, - 0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD, - 0x35931497, 0x35376956, 0xBD697B9D, 0x96931313, - 0x19797937, 0x69350000, -}; -#else - -static ulong patch_2000[] = { - 0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000, - 0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000, - 0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2, - 0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d, - 0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d, - 0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d, - 0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb, - 0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb, - 0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff, - 0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff, - 0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2, - 0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8, - 0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd, - 0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710, - 0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e, - 0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf, - 0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8, - 0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b, - 0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f, - 0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd, - 0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb, - 0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8, - 0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc, - 0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93, - 0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08, - 0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc, - 0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27, - 0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa, - 0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a, - 0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd, - 0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18, - 0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489, - 0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed, - 0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb, - 0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd, - 0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a, - 0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf, - 0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf, - 0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf, - 0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf, - 0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f, - 0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079, - 0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a, - 0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079, - 0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2, - 0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8, - 0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00, - 0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb, - 0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f, - 0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e, - 0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb, - 0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb, - 0xe2bb2ff9, 0x6079e2bb, -}; - -static ulong patch_2F00[] = { - 0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979, - 0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f, - 0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136, - 0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91, - 0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9, - 0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683, - 0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e, - 0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379, - 0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f, - 0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee, - 0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2, - 0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1, - 0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f, - 0xf22f0000, -}; -#endif - -static void UcodeCopy (volatile cpm8xx_t *cpm) -{ - vu_long *p; - int i; - - p = (vu_long *)&(cpm->cp_dpmem[0x0000]); - for (i=0; i < sizeof(patch_2000)/4; ++i) { - p[i] = patch_2000[i]; - } - - p = (vu_long *)&(cpm->cp_dpmem[0x0F00]); - for (i=0; i < sizeof(patch_2F00)/4; ++i) { - p[i] = patch_2F00[i]; - } -} - -#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */ diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c deleted file mode 100644 index c35406d37b..0000000000 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ /dev/null @@ -1,1123 +0,0 @@ -/* - * (C) Copyright 2000 - * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it - * (C) Copyright 2002 - * Wolfgang Denk, wd@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* #define DEBUG */ - -/************************************************************************/ -/* ** HEADER FILES */ -/************************************************************************/ - -#include <stdarg.h> -#include <common.h> -#include <config.h> -#include <version.h> -#include <i2c.h> -#include <linux/types.h> -#include <stdio_dev.h> - -#ifdef CONFIG_VIDEO - -DECLARE_GLOBAL_DATA_PTR; - -/************************************************************************/ -/* ** DEBUG SETTINGS */ -/************************************************************************/ - -#if 0 -#define VIDEO_DEBUG_COLORBARS /* Force colorbars output */ -#endif - -/************************************************************************/ -/* ** VIDEO MODE SETTINGS */ -/************************************************************************/ - -#if 0 -#define VIDEO_MODE_EXTENDED /* Allow screen size bigger than visible area */ -#define VIDEO_MODE_NTSC -#endif - -#define VIDEO_MODE_PAL - -#if 0 -#define VIDEO_BLINK /* This enables cursor blinking (under construction) */ -#endif - -#define VIDEO_INFO /* Show U-Boot information */ -#define VIDEO_INFO_X VIDEO_LOGO_WIDTH+8 -#define VIDEO_INFO_Y 16 - -/************************************************************************/ -/* ** VIDEO MODE CONSTANTS */ -/************************************************************************/ - -#ifdef VIDEO_MODE_EXTENDED -#define VIDEO_COLS VIDEO_ACTIVE_COLS -#define VIDEO_ROWS VIDEO_ACTIVE_ROWS -#else -#define VIDEO_COLS VIDEO_VISIBLE_COLS -#define VIDEO_ROWS VIDEO_VISIBLE_ROWS -#endif - -#define VIDEO_PIXEL_SIZE (VIDEO_MODE_BPP/8) -#define VIDEO_SIZE (VIDEO_ROWS*VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Total size of buffer */ -#define VIDEO_PIX_BLOCKS (VIDEO_SIZE >> 2) /* Number of ints */ -#define VIDEO_LINE_LEN (VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Number of bytes per line */ -#define VIDEO_BURST_LEN (VIDEO_COLS/8) - -#ifdef VIDEO_MODE_YUYV -#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */ -#else -#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */ -#endif - -/************************************************************************/ -/* ** FONT AND LOGO DATA */ -/************************************************************************/ - -#include <video_font.h> /* Get font data, width and height */ - -#ifdef CONFIG_VIDEO_LOGO -#include <video_logo.h> /* Get logo data, width and height */ - -#define VIDEO_LOGO_WIDTH DEF_U_BOOT_LOGO_WIDTH -#define VIDEO_LOGO_HEIGHT DEF_U_BOOT_LOGO_HEIGHT -#define VIDEO_LOGO_ADDR &u_boot_logo -#endif - -/************************************************************************/ -/* ** VIDEO CONTROLLER CONSTANTS */ -/************************************************************************/ - -/* VCCR - VIDEO CONTROLLER CONFIGURATION REGISTER */ - -#define VIDEO_VCCR_VON 0 /* Video controller ON */ -#define VIDEO_VCCR_CSRC 1 /* Clock source */ -#define VIDEO_VCCR_PDF 13 /* Pixel display format */ -#define VIDEO_VCCR_IEN 11 /* Interrupt enable */ - -/* VSR - VIDEO STATUS REGISTER */ - -#define VIDEO_VSR_CAS 6 /* Active set */ -#define VIDEO_VSR_EOF 0 /* End of frame */ - -/* VCMR - VIDEO COMMAND REGISTER */ - -#define VIDEO_VCMR_BD 0 /* Blank display */ -#define VIDEO_VCMR_ASEL 1 /* Active set selection */ - -/* VBCB - VIDEO BACKGROUND COLOR BUFFER REGISTER */ - -#define VIDEO_BCSR4_RESET_BIT 21 /* BCSR4 - Extern video encoder reset */ -#define VIDEO_BCSR4_EXTCLK_BIT 22 /* BCSR4 - Extern clock enable */ -#define VIDEO_BCSR4_VIDLED_BIT 23 /* BCSR4 - Video led disable */ - -/************************************************************************/ -/* ** CONSOLE CONSTANTS */ -/************************************************************************/ - -#ifdef CONFIG_VIDEO_LOGO -#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT) -#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH) -#else -#define CONSOLE_ROWS (VIDEO_ROWS / VIDEO_FONT_HEIGHT) -#endif - -#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH) -#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN) -#define CONSOLE_ROW_FIRST (video_console_address) -#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE) -#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE) -#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS) -#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE) - -/* - * Simple color definitions - */ -#define CONSOLE_COLOR_BLACK 0 -#define CONSOLE_COLOR_RED 1 -#define CONSOLE_COLOR_GREEN 2 -#define CONSOLE_COLOR_YELLOW 3 -#define CONSOLE_COLOR_BLUE 4 -#define CONSOLE_COLOR_MAGENTA 5 -#define CONSOLE_COLOR_CYAN 6 -#define CONSOLE_COLOR_GREY 13 -#define CONSOLE_COLOR_GREY2 14 -#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - -/************************************************************************/ -/* ** BITOPS MACROS */ -/************************************************************************/ - -#define HISHORT(i) ((i >> 16)&0xffff) -#define LOSHORT(i) (i & 0xffff) -#define HICHAR(s) ((i >> 8)&0xff) -#define LOCHAR(s) (i & 0xff) -#define HI(c) ((c >> 4)&0xf) -#define LO(c) (c & 0xf) -#define SWAPINT(i) (HISHORT(i) | (LOSHORT(i) << 16)) -#define SWAPSHORT(s) (HICHAR(s) | (LOCHAR(s) << 8)) -#define SWAPCHAR(c) (HI(c) | (LO(c) << 4)) -#define BITMASK(b) (1 << (b)) -#define GETBIT(v,b) (((v) & BITMASK(b)) > 0) -#define SETBIT(v,b,d) (v = (((d)>0) ? (v) | BITMASK(b): (v) & ~BITMASK(b))) - -/************************************************************************/ -/* ** STRUCTURES */ -/************************************************************************/ - -typedef struct { - unsigned char V, Y1, U, Y2; -} tYUYV; - -/* This structure is based on the Video Ram in the MPC823. */ -typedef struct VRAM { - unsigned hx:2, /* Horizontal sync */ - vx:2, /* Vertical sync */ - fx:2, /* Frame */ - bx:2, /* Blank */ - res1:6, /* Reserved */ - vds:2, /* Video Data Select */ - inter:1, /* Interrupt */ - res2:2, /* Reserved */ - lcyc:11, /* Loop/video cycles */ - lp:1, /* Loop start/end */ - lst:1; /* Last entry */ -} VRAM; - -/************************************************************************/ -/* ** VARIABLES */ -/************************************************************************/ - -static int - video_panning_range_x = 0, /* Video mode invisible pixels x range */ - video_panning_range_y = 0, /* Video mode invisible pixels y range */ - video_panning_value_x = 0, /* Video mode x panning value (absolute) */ - video_panning_value_y = 0, /* Video mode y panning value (absolute) */ - video_panning_factor_x = 0, /* Video mode x panning value (-127 +127) */ - video_panning_factor_y = 0, /* Video mode y panning value (-127 +127) */ - console_col = 0, /* Cursor col */ - console_row = 0, /* Cursor row */ - video_palette[16]; /* Our palette */ - -static const int video_font_draw_table[] = - { 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff }; - -static char - video_color_fg = 0, /* Current fg color index (0-15) */ - video_color_bg = 0, /* Current bg color index (0-15) */ - video_enable = 0; /* Video has been initialized? */ - -static void - *video_fb_address, /* Frame buffer address */ - *video_console_address; /* Console frame buffer start address */ - -/************************************************************************/ -/* ** MEMORY FUNCTIONS (32bit) */ -/************************************************************************/ - -static void memsetl (int *p, int c, int v) -{ - while (c--) - *(p++) = v; -} - -static void memcpyl (int *d, int *s, int c) -{ - while (c--) - *(d++) = *(s++); -} - -/************************************************************************/ -/* ** VIDEO DRAWING AND COLOR FUNCTIONS */ -/************************************************************************/ - -static int video_maprgb (int r, int g, int b) -{ -#ifdef VIDEO_MODE_YUYV - unsigned int pR, pG, pB; - tYUYV YUYV; - unsigned int *ret = (unsigned int *) &YUYV; - - /* Transform (0-255) components to (0-100) */ - - pR = r * 100 / 255; - pG = g * 100 / 255; - pB = b * 100 / 255; - - /* Calculate YUV values (0-255) from RGB beetween 0-100 */ - - YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16; - YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128; - YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128; - return *ret; -#endif -#ifdef VIDEO_MODE_RGB - return ((r >> 3) << 11) | ((g > 2) << 6) | (b >> 3); -#endif -} - -static void video_setpalette (int color, int r, int g, int b) -{ - color &= 0xf; - - video_palette[color] = video_maprgb (r, g, b); - - /* Swap values if our panning offset is odd */ - if (video_panning_value_x & 1) - video_palette[color] = SWAPINT (video_palette[color]); -} - -static void video_fill (int color) -{ - memsetl (video_fb_address, VIDEO_PIX_BLOCKS, color); -} - -static void video_setfgcolor (int i) -{ - video_color_fg = i & 0xf; -} - -static void video_setbgcolor (int i) -{ - video_color_bg = i & 0xf; -} - -static int video_pickcolor (int i) -{ - return video_palette[i & 0xf]; -} - -/* Absolute console plotting functions */ - -#ifdef VIDEO_BLINK -static void video_revchar (int xx, int yy) -{ - int rows; - u8 *dest; - - dest = video_fb_address + yy * VIDEO_LINE_LEN + xx * 2; - - for (rows = VIDEO_FONT_HEIGHT; rows--; dest += VIDEO_LINE_LEN) { - switch (VIDEO_FONT_WIDTH) { - case 16: - ((u32 *) dest)[6] ^= 0xffffffff; - ((u32 *) dest)[7] ^= 0xffffffff; - /* FALL THROUGH */ - case 12: - ((u32 *) dest)[4] ^= 0xffffffff; - ((u32 *) dest)[5] ^= 0xffffffff; - /* FALL THROUGH */ - case 8: - ((u32 *) dest)[2] ^= 0xffffffff; - ((u32 *) dest)[3] ^= 0xffffffff; - /* FALL THROUGH */ - case 4: - ((u32 *) dest)[0] ^= 0xffffffff; - ((u32 *) dest)[1] ^= 0xffffffff; - } - } -} -#endif - -static void video_drawchars (int xx, int yy, unsigned char *s, int count) -{ - u8 *cdat, *dest, *dest0; - int rows, offset, c; - u32 eorx, fgx, bgx; - - offset = yy * VIDEO_LINE_LEN + xx * 2; - dest0 = video_fb_address + offset; - - fgx = video_pickcolor (video_color_fg); - bgx = video_pickcolor (video_color_bg); - - if (xx & 1) { - fgx = SWAPINT (fgx); - bgx = SWAPINT (bgx); - } - - eorx = fgx ^ bgx; - - switch (VIDEO_FONT_WIDTH) { - case 4: - case 8: - while (count--) { - c = *s; - cdat = video_fontdata + c * VIDEO_FONT_HEIGHT; - for (rows = VIDEO_FONT_HEIGHT, dest = dest0; - rows--; - dest += VIDEO_LINE_LEN) { - u8 bits = *cdat++; - - ((u32 *) dest)[0] = - (video_font_draw_table[bits >> 6] & eorx) ^ bgx; - ((u32 *) dest)[1] = - (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx; - if (VIDEO_FONT_WIDTH == 8) { - ((u32 *) dest)[2] = - (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx; - ((u32 *) dest)[3] = - (video_font_draw_table[bits & 3] & eorx) ^ bgx; - } - } - dest0 += VIDEO_FONT_WIDTH * 2; - s++; - } - break; - case 12: - case 16: - while (count--) { - cdat = video_fontdata + (*s) * (VIDEO_FONT_HEIGHT << 1); - for (rows = VIDEO_FONT_HEIGHT, dest = dest0; rows--; - dest += VIDEO_LINE_LEN) { - u8 bits = *cdat++; - - ((u32 *) dest)[0] = - (video_font_draw_table[bits >> 6] & eorx) ^ bgx; - ((u32 *) dest)[1] = - (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx; - ((u32 *) dest)[2] = - (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx; - ((u32 *) dest)[3] = - (video_font_draw_table[bits & 3] & eorx) ^ bgx; - bits = *cdat++; - ((u32 *) dest)[4] = - (video_font_draw_table[bits >> 6] & eorx) ^ bgx; - ((u32 *) dest)[5] = - (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx; - if (VIDEO_FONT_WIDTH == 16) { - ((u32 *) dest)[6] = - (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx; - ((u32 *) dest)[7] = - (video_font_draw_table[bits & 3] & eorx) ^ bgx; - } - } - s++; - dest0 += VIDEO_FONT_WIDTH * 2; - } - break; - } -} - -static inline void video_drawstring (int xx, int yy, char *s) -{ - video_drawchars (xx, yy, (unsigned char *)s, strlen (s)); -} - -/* Relative to console plotting functions */ - -static void video_putchars (int xx, int yy, unsigned char *s, int count) -{ -#ifdef CONFIG_VIDEO_LOGO - video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, s, count); -#else - video_drawchars (xx, yy, s, count); -#endif -} - -static void video_putchar (int xx, int yy, unsigned char c) -{ -#ifdef CONFIG_VIDEO_LOGO - video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1); -#else - video_drawchars (xx, yy, &c, 1); -#endif -} - -static inline void video_putstring (int xx, int yy, unsigned char *s) -{ - video_putchars (xx, yy, (unsigned char *)s, strlen ((char *)s)); -} - -/************************************************************************/ -/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */ -/************************************************************************/ - -static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries) -{ - int i; - - for (i = 0; i < entries; i++) { - dest[i] = source[i]; /* Copy the entire record */ - dest[i].fx = (!dest[i].fx) * 3; /* Negate field bit */ - } - - dest[0].lcyc++; /* Add a cycle to the first entry */ - dest[entries - 1].lst = 1; /* Set end of ram entries */ -} - -static void inline video_mode_addentry (VRAM * vr, - int Hx, int Vx, int Fx, int Bx, - int VDS, int INT, int LCYC, int LP, int LST) -{ - vr->hx = Hx; - vr->vx = Vx; - vr->fx = Fx; - vr->bx = Bx; - vr->vds = VDS; - vr->inter = INT; - vr->lcyc = LCYC; - vr->lp = LP; - vr->lst = LST; -} - -#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i) - -static int video_mode_generate (void) -{ - immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - VRAM *vr = (VRAM *) (((void *) immap) + 0xb00); /* Pointer to the VRAM table */ - int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo; - - /* CHECKING PARAMETERS */ - - if (video_panning_factor_y < -128) - video_panning_factor_y = -128; - - if (video_panning_factor_y > 128) - video_panning_factor_y = 128; - - if (video_panning_factor_x < -128) - video_panning_factor_x = -128; - - if (video_panning_factor_x > 128) - video_panning_factor_x = 128; - - /* Setting panning */ - - DX = video_panning_range_x = (VIDEO_ACTIVE_COLS - VIDEO_COLS) * 2; - DY = video_panning_range_y = (VIDEO_ACTIVE_ROWS - VIDEO_ROWS) / 2; - - video_panning_value_x = (video_panning_factor_x + 128) * DX / 256; - video_panning_value_y = (video_panning_factor_y + 128) * DY / 256; - - /* We assume these are burst units (multiplied by 2, we need it pari) */ - X1 = video_panning_value_x & 0xfffe; - X2 = DX - X1; - - /* We assume these are field line units (divided by 2, we need it pari) */ - Y1 = video_panning_value_y & 0xfffe; - Y2 = DY - Y1; - - debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n", - X1, X2, Y1, Y2, DX, DY, VIDEO_COLS); - -#ifdef VIDEO_MODE_NTSC -/* - * Hx Vx Fx Bx VDS INT LCYC LP LST - * - * Retrace blanking - */ - ADDENTRY (0, 0, 3, 0, 1, 0, 3, 1, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0); -/* - * Vertical blanking - */ - ADDENTRY (0, 0, 0, 0, 1, 0, 18, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0); -/* - * Odd field active area (TOP) - */ - if (Y1 > 0) { - ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0); - ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0); - } -/* - * Odd field active area - */ - ADDENTRY (0, 0, 0, 0, 1, 0, 240 - DY, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0); - ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0); - ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0); - - if (X2 > 0) - ADDENTRY (3, 0, 0, 3, 1, 0, X2, 0, 0); - - ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0); - -/* - * Odd field active area (BOTTOM) - */ - if (Y1 > 0) { - ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0); - ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0); - } -/* - * Vertical blanking - */ - ADDENTRY (0, 0, 0, 0, 1, 0, 4, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0); -/* - * Vertical blanking - */ - ADDENTRY (0, 0, 3, 0, 1, 0, 19, 1, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0); -/* - * Even field active area (TOP) - */ - if (Y1 > 0) { - ADDENTRY (0, 0, 3, 0, 1, 0, Y1, 1, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0); - ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0); - } -/* - * Even field active area (CENTER) - */ - ADDENTRY (0, 0, 3, 0, 1, 0, 240 - DY, 1, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0); - ADDENTRY (3, 0, 3, 3, 1, 0, 8 + X1, 0, 0); - ADDENTRY (3, 0, 3, 3, 0, 0, VIDEO_COLS * 2, 0, 0); - - if (X2 > 0) - ADDENTRY (3, 0, 3, 3, 1, 0, X2, 0, 0); - - ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0); -/* - * Even field active area (BOTTOM) - */ - if (Y1 > 0) { - ADDENTRY (0, 0, 3, 0, 1, 0, Y2, 1, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0); - ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0); - } -/* - * Vertical blanking - */ - ADDENTRY (0, 0, 3, 0, 1, 0, 1, 1, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 3, 0, 1, 1, 32, 1, 1); -#endif - -#ifdef VIDEO_MODE_PAL - -/* - * Hx Vx Fx Bx VDS INT LCYC LP LST - * - * vertical; blanking - */ - ADDENTRY (0, 0, 0, 0, 1, 0, 22, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0); -/* - * active area (TOP) - */ - if (Y1 > 0) { - ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0); /* 11? */ - ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0); - ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0); - } -/* - * field active area (CENTER) - */ - ADDENTRY (0, 0, 0, 0, 1, 0, 288 - DY, 1, 0); /* 265? */ - ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0); - ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0); - ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0); - - if (X2 > 0) - ADDENTRY (3, 0, 0, 1, 1, 0, X2, 0, 0); - - ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0); -/* - * field active area (BOTTOM) - */ - if (Y2 > 0) { - ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0); /* 12? */ - ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0); - ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0); - } -/* - * field vertical; blanking - */ - ADDENTRY (0, 0, 0, 0, 1, 0, 2, 1, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0); - ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0); -/* - * Create the other field (like this, but whit other field selected, - * one more cycle loop and a last identifier) - */ - video_mode_dupefield (vr, &vr[entry], entry); - -#endif /* VIDEO_MODE_PAL */ - - /* See what FIFO are we using */ - fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS); - - /* Set number of lines and burst (only one frame for now) */ - if (fifo) { - immap->im_vid.vid_vfcr0 = VIDEO_BURST_LEN | - (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19); - } else { - immap->im_vid.vid_vfcr1 = VIDEO_BURST_LEN | - (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19); - } - - SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_ASEL, !fifo); - -/* - * Wait until changes are applied (not done) - * while (GETBIT(immap->im_vid.vid_vsr, VIDEO_VSR_CAS) == fifo) ; - */ - - /* Return number of VRAM entries */ - return entry * 2; -} - -static void video_encoder_init (void) -{ - return; -} - -static void video_ctrl_init (void *memptr) -{ - immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - video_fb_address = memptr; - - /* Set background */ - debug ("[VIDEO CTRL] Setting background color...\n"); - immap->im_vid.vid_vbcb = VIDEO_BG_COL; - - /* Show the background */ - debug ("[VIDEO CTRL] Forcing background...\n"); - SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 1); - - /* Turn off video controller */ - debug ("[VIDEO CTRL] Turning off video controller...\n"); - SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0); - - /* Generate and make active a new video mode */ - debug ("[VIDEO CTRL] Generating video mode...\n"); - video_mode_generate (); - - /* Start of frame buffer (even and odd frame, to make it working with */ - /* any selected active set) */ - debug ("[VIDEO CTRL] Setting frame buffer address...\n"); - immap->im_vid.vid_vfaa1 = - immap->im_vid.vid_vfaa0 = (u32) video_fb_address; - immap->im_vid.vid_vfba1 = - immap->im_vid.vid_vfba0 = - (u32) video_fb_address + VIDEO_LINE_LEN; - - /* YUV, Big endian, SHIFT/CLK/CLK input (BEFORE ENABLING 27MHZ EXT CLOCK) */ - debug ("[VIDEO CTRL] Setting pixel mode and clocks...\n"); - immap->im_vid.vid_vccr = 0x2042; - - /* Configure port pins */ - debug ("[VIDEO CTRL] Configuring input/output pins...\n"); - immap->im_ioport.iop_pdpar = 0x1fff; - immap->im_ioport.iop_pddir = 0x0000; - - /* Blanking the screen. */ - debug ("[VIDEO CTRL] Blanking the screen...\n"); - video_fill (VIDEO_BG_COL); - - /* - * Turns on Aggressive Mode. Normally, turning on the caches - * will cause the screen to flicker when the caches try to - * fill. This gives the FIFO's for the Video Controller - * higher priority and prevents flickering because of - * underrun. This may still be an issue when using FLASH, - * since accessing data from Flash is so slow. - */ - debug ("[VIDEO CTRL] Turning on aggressive mode...\n"); - immap->im_siu_conf.sc_sdcr = 0x40; - - /* Turn on video controller */ - debug ("[VIDEO CTRL] Turning on video controller...\n"); - SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 1); - - /* Show the display */ - debug ("[VIDEO CTRL] Enabling the video...\n"); - SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 0); -} - -/************************************************************************/ -/* ** CONSOLE FUNCTIONS */ -/************************************************************************/ - -static void console_scrollup (void) -{ - /* Copy up rows ignoring the first one */ - memcpyl (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE >> 2); - - /* Clear the last one */ - memsetl (CONSOLE_ROW_LAST, CONSOLE_ROW_SIZE >> 2, VIDEO_BG_COL); -} - -static inline void console_back (void) -{ - console_col--; - - if (console_col < 0) { - console_col = CONSOLE_COLS - 1; - console_row--; - if (console_row < 0) - console_row = 0; - } - - video_putchar ( console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, ' '); -} - -static inline void console_newline (void) -{ - console_row++; - console_col = 0; - - /* Check if we need to scroll the terminal */ - if (console_row >= CONSOLE_ROWS) { - /* Scroll everything up */ - console_scrollup (); - - /* Decrement row number */ - console_row--; - } -} - -void video_putc(struct stdio_dev *dev, const char c) -{ - if (!video_enable) { - serial_putc (c); - return; - } - - switch (c) { - case 13: /* Simply ignore this */ - break; - - case '\n': /* Next line, please */ - console_newline (); - break; - - case 9: /* Tab (8 chars alignment) */ - console_col |= 0x0008; /* Next 8 chars boundary */ - console_col &= ~0x0007; /* Set this bit to zero */ - - if (console_col >= CONSOLE_COLS) - console_newline (); - break; - - case 8: /* Eat last character */ - console_back (); - break; - - default: /* Add to the console */ - video_putchar ( console_col * VIDEO_FONT_WIDTH, - console_row * VIDEO_FONT_HEIGHT, c); - console_col++; - /* Check if we need to go to next row */ - if (console_col >= CONSOLE_COLS) - console_newline (); - } -} - -void video_puts(struct stdio_dev *dev, const char *s) -{ - int count = strlen (s); - - if (!video_enable) - while (count--) - serial_putc (*s++); - else - while (count--) - video_putc(dev, *s++); -} - -/************************************************************************/ -/* ** CURSOR BLINKING FUNCTIONS */ -/************************************************************************/ - -#ifdef VIDEO_BLINK - -#define BLINK_TIMER_ID 0 -#define BLINK_TIMER_HZ 2 - -static unsigned char blink_enabled = 0; -static timer_t blink_timer; - -static void blink_update (void) -{ - static int blink_row = -1, blink_col = -1, blink_old = 0; - - /* Check if we have a new position to invert */ - if ((console_row != blink_row) || (console_col != blink_col)) { - /* Check if we need to reverse last character */ - if (blink_old) - video_revchar ( blink_col * VIDEO_FONT_WIDTH, - (blink_row -#ifdef CONFIG_VIDEO_LOGO - + VIDEO_LOGO_HEIGHT -#endif - ) * VIDEO_FONT_HEIGHT); - - /* Update values */ - blink_row = console_row; - blink_col = console_col; - blink_old = 0; - } - -/* Reverse this character */ - blink_old = !blink_old; - video_revchar ( console_col * VIDEO_FONT_WIDTH, - (console_row -#ifdef CONFIG_VIDEO_LOGO - + VIDEO_LOGO_HEIGHT -#endif - ) * VIDEO_FONT_HEIGHT); - -} - -/* - * Handler for blinking cursor - */ -static void blink_handler (void *arg) -{ -/* Blink */ - blink_update (); -/* Ack the timer */ - timer_ack (&blink_timer); -} - -int blink_set (int blink) -{ - int ret = blink_enabled; - - if (blink) - timer_enable (&blink_timer); - else - timer_disable (&blink_timer); - - blink_enabled = blink; - - return ret; -} - -static inline void blink_close (void) -{ - timer_close (&blink_timer); -} - -static inline void blink_init (void) -{ - timer_init (&blink_timer, - BLINK_TIMER_ID, BLINK_TIMER_HZ, - blink_handler); -} -#endif - -/************************************************************************/ -/* ** LOGO PLOTTING FUNCTIONS */ -/************************************************************************/ - -#ifdef CONFIG_VIDEO_LOGO -void easylogo_plot (fastimage_t * image, void *screen, int width, int x, - int y) -{ - int skip = width - image->width, xcount, ycount = image->height; - -#ifdef VIDEO_MODE_YUYV - ushort *source = (ushort *) image->data; - ushort *dest = (ushort *) screen + y * width + x; - - while (ycount--) { - xcount = image->width; - while (xcount--) - *dest++ = *source++; - dest += skip; - } -#endif -#ifdef VIDEO_MODE_RGB - unsigned char - *source = (unsigned short *) image->data, - *dest = (unsigned short *) screen + ((y * width) + x) * 3; - - while (ycount--) { - xcount = image->width * 3; - memcpy (dest, source, xcount); - source += xcount; - dest += ycount; - } -#endif -} - -static void *video_logo (void) -{ - u16 *screen = video_fb_address, width = VIDEO_COLS; -#ifdef VIDEO_INFO - char temp[32]; - char info[80]; -#endif /* VIDEO_INFO */ - - easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0); - -#ifdef VIDEO_INFO - sprintf (info, "%s (%s - %s) ", - U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME); - video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info); - - strcpy(info, "(C) 2002 DENX Software Engineering"); - video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT, - info); - - strcpy(info, " Wolfgang DENK, wd@denx.de"); - video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2, - info); - - /* leave one blank line */ - - sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash", - strmhz(temp, gd->cpu_clk), - gd->ram_size >> 20, - gd->bd->bi_flashsize >> 20 ); - video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4, - info); -#endif - - return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN; -} -#endif - -/************************************************************************/ -/* ** VIDEO HIGH-LEVEL FUNCTIONS */ -/************************************************************************/ - -static int video_init (void *videobase) -{ - /* Initialize the encoder */ - debug ("[VIDEO] Initializing video encoder...\n"); - video_encoder_init (); - - /* Initialize the video controller */ - debug ("[VIDEO] Initializing video controller at %08x...\n", - (int) videobase); - video_ctrl_init (videobase); - - /* Setting the palette */ - video_setpalette (CONSOLE_COLOR_BLACK, 0, 0, 0); - video_setpalette (CONSOLE_COLOR_RED, 0xFF, 0, 0); - video_setpalette (CONSOLE_COLOR_GREEN, 0, 0xFF, 0); - video_setpalette (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0); - video_setpalette (CONSOLE_COLOR_BLUE, 0, 0, 0xFF); - video_setpalette (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF); - video_setpalette (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF); - video_setpalette (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA); - video_setpalette (CONSOLE_COLOR_GREY2, 0xF8, 0xF8, 0xF8); - video_setpalette (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF); - -#ifndef CONFIG_SYS_WHITE_ON_BLACK - video_setfgcolor (CONSOLE_COLOR_BLACK); - video_setbgcolor (CONSOLE_COLOR_GREY2); -#else - video_setfgcolor (CONSOLE_COLOR_GREY2); - video_setbgcolor (CONSOLE_COLOR_BLACK); -#endif /* CONFIG_SYS_WHITE_ON_BLACK */ - -#ifdef CONFIG_VIDEO_LOGO - /* Paint the logo and retrieve tv base address */ - debug ("[VIDEO] Drawing the logo...\n"); - video_console_address = video_logo (); -#else - video_console_address = video_fb_address; -#endif - -#ifdef VIDEO_BLINK - /* Enable the blinking (under construction) */ - blink_init (); - blink_set (0); /* To Fix! */ -#endif - - /* Initialize the console */ - console_col = 0; - console_row = 0; - video_enable = 1; - -#ifdef VIDEO_MODE_PAL -# define VIDEO_MODE_TMP1 "PAL" -#endif -#ifdef VIDEO_MODE_NTSC -# define VIDEO_MODE_TMP1 "NTSC" -#endif -#ifdef VIDEO_MODE_YUYV -# define VIDEO_MODE_TMP2 "YCbYCr" -#endif -#ifdef VIDEO_MODE_RGB -# define VIDEO_MODE_TMP2 "RGB" -#endif - debug ( VIDEO_MODE_TMP1 - " %dx%dx%d (" VIDEO_MODE_TMP2 ") on %s - console %dx%d\n", - VIDEO_COLS, VIDEO_ROWS, VIDEO_MODE_BPP, - VIDEO_ENCODER_NAME, CONSOLE_COLS, CONSOLE_ROWS); - return 0; -} - -int drv_video_init (void) -{ - int error, devices = 1; - - struct stdio_dev videodev; - - video_init ((void *)(gd->fb_base)); /* Video initialization */ - -/* Device initialization */ - - memset (&videodev, 0, sizeof (videodev)); - - strcpy (videodev.name, "video"); - videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ - videodev.putc = video_putc; /* 'putc' function */ - videodev.puts = video_puts; /* 'puts' function */ - - error = stdio_register (&videodev); - - return (error == 0) ? devices : error; -} - -/************************************************************************/ -/* ** ROM capable initialization part - needed to reserve FB memory */ -/************************************************************************/ - -/* - * This is called early in the system initialization to grab memory - * for the video controller. - * Returns new address for monitor, after reserving video buffer memory - * - * Note that this is running from ROM, so no write access to global data. - */ -ulong video_setmem (ulong addr) -{ - /* Allocate pages for the frame buffer. */ - addr -= VIDEO_SIZE; - - debug ("Reserving %dk for Video Framebuffer at: %08lx\n", - VIDEO_SIZE>>10, addr); - - return (addr); -} - -#endif diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c index c02058f79b..bca839378d 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c @@ -9,7 +9,6 @@ */ #include <common.h> -#include <commproc.h> #include <asm/processor.h> #include <asm/io.h> #include <watchdog.h> diff --git a/arch/powerpc/cpu/ppc4xx/interrupts.c b/arch/powerpc/cpu/ppc4xx/interrupts.c index 45997d6eae..599f2c21cf 100644 --- a/arch/powerpc/cpu/ppc4xx/interrupts.c +++ b/arch/powerpc/cpu/ppc4xx/interrupts.c @@ -22,7 +22,6 @@ #include <asm/interrupt.h> #include <asm/ppc4xx.h> #include <ppc_asm.tmpl> -#include <commproc.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/ppc4xx/miiphy.c b/arch/powerpc/cpu/ppc4xx/miiphy.c index aef267e0a2..6273772ee0 100644 --- a/arch/powerpc/cpu/ppc4xx/miiphy.c +++ b/arch/powerpc/cpu/ppc4xx/miiphy.c @@ -21,7 +21,6 @@ #include <asm/processor.h> #include <asm/io.h> #include <ppc_asm.tmpl> -#include <commproc.h> #include <asm/ppc4xx.h> #include <asm/ppc4xx-emac.h> #include <asm/ppc4xx-mal.h> diff --git a/arch/powerpc/cpu/ppc4xx/uic.c b/arch/powerpc/cpu/ppc4xx/uic.c index fb453b1adf..acc232dcf2 100644 --- a/arch/powerpc/cpu/ppc4xx/uic.c +++ b/arch/powerpc/cpu/ppc4xx/uic.c @@ -22,7 +22,6 @@ #include <asm/interrupt.h> #include <asm/ppc4xx.h> #include <ppc_asm.tmpl> -#include <commproc.h> #if (UIC_MAX > 3) #define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \ diff --git a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c index 1a2e917eb2..acb933e08b 100644 --- a/arch/powerpc/cpu/ppc4xx/xilinx_irq.c +++ b/arch/powerpc/cpu/ppc4xx/xilinx_irq.c @@ -12,7 +12,6 @@ #include <asm/interrupt.h> #include <asm/ppc4xx.h> #include <ppc_asm.tmpl> -#include <commproc.h> #include <asm/io.h> #include <asm/xilinx_irq.h> diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h deleted file mode 100644 index dfaddb6f1d..0000000000 --- a/arch/powerpc/include/asm/8xx_immap.h +++ /dev/null @@ -1,515 +0,0 @@ -/* - * MPC8xx Internal Memory Map - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * The I/O on the MPC860 is comprised of blocks of special registers - * and the dual port ram for the Communication Processor Module. - * Within this space are functional units such as the SIU, memory - * controller, system timers, and other control functions. It is - * a combination that I found difficult to separate into logical - * functional files.....but anyone else is welcome to try. -- Dan - */ -#ifndef __IMMAP_8XX__ -#define __IMMAP_8XX__ - -/* System configuration registers. -*/ -typedef struct sys_conf { - uint sc_siumcr; - uint sc_sypcr; - uint sc_swt; - char res1[2]; - ushort sc_swsr; - uint sc_sipend; - uint sc_simask; - uint sc_siel; - uint sc_sivec; - uint sc_tesr; - char res2[0xc]; - uint sc_sdcr; - char res3[0x4c]; -} sysconf8xx_t; - -/* PCMCIA configuration registers. -*/ -typedef struct pcmcia_conf { - uint pcmc_pbr0; - uint pcmc_por0; - uint pcmc_pbr1; - uint pcmc_por1; - uint pcmc_pbr2; - uint pcmc_por2; - uint pcmc_pbr3; - uint pcmc_por3; - uint pcmc_pbr4; - uint pcmc_por4; - uint pcmc_pbr5; - uint pcmc_por5; - uint pcmc_pbr6; - uint pcmc_por6; - uint pcmc_pbr7; - uint pcmc_por7; - char res1[0x20]; - uint pcmc_pgcra; - uint pcmc_pgcrb; - uint pcmc_pscr; - char res2[4]; - uint pcmc_pipr; - char res3[4]; - uint pcmc_per; - char res4[4]; -} pcmconf8xx_t; - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - uint memc_br0; - uint memc_or0; - uint memc_br1; - uint memc_or1; - uint memc_br2; - uint memc_or2; - uint memc_br3; - uint memc_or3; - uint memc_br4; - uint memc_or4; - uint memc_br5; - uint memc_or5; - uint memc_br6; - uint memc_or6; - uint memc_br7; - uint memc_or7; - char res1[0x24]; - uint memc_mar; - uint memc_mcr; - char res2[4]; - uint memc_mamr; - uint memc_mbmr; - ushort memc_mstat; - ushort memc_mptpr; - uint memc_mdr; - char res3[0x80]; -} memctl8xx_t; - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - ushort sit_tbscr; - char res0[0x02]; - uint sit_tbreff0; - uint sit_tbreff1; - char res1[0x14]; - ushort sit_rtcsc; - char res2[0x02]; - uint sit_rtc; - uint sit_rtsec; - uint sit_rtcal; - char res3[0x10]; - ushort sit_piscr; - char res4[2]; - uint sit_pitc; - uint sit_pitr; - char res5[0x34]; -} sit8xx_t; - -#define TBSCR_TBIRQ_MASK ((ushort)0xff00) -#define TBSCR_REFA ((ushort)0x0080) -#define TBSCR_REFB ((ushort)0x0040) -#define TBSCR_REFAE ((ushort)0x0008) -#define TBSCR_REFBE ((ushort)0x0004) -#define TBSCR_TBF ((ushort)0x0002) -#define TBSCR_TBE ((ushort)0x0001) - -#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) -#define RTCSC_SEC ((ushort)0x0080) -#define RTCSC_ALR ((ushort)0x0040) -#define RTCSC_38K ((ushort)0x0010) -#define RTCSC_SIE ((ushort)0x0008) -#define RTCSC_ALE ((ushort)0x0004) -#define RTCSC_RTF ((ushort)0x0002) -#define RTCSC_RTE ((ushort)0x0001) - -#define PISCR_PIRQ_MASK ((ushort)0xff00) -#define PISCR_PS ((ushort)0x0080) -#define PISCR_PIE ((ushort)0x0004) -#define PISCR_PTF ((ushort)0x0002) -#define PISCR_PTE ((ushort)0x0001) - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - uint car_sccr; - uint car_plprcr; - uint car_rsr; - char res[0x74]; /* Reserved area */ -} car8xx_t; - -/* System Integration Timers keys. -*/ -typedef struct sitk { - uint sitk_tbscrk; - uint sitk_tbreff0k; - uint sitk_tbreff1k; - uint sitk_tbk; - char res1[0x10]; - uint sitk_rtcsck; - uint sitk_rtck; - uint sitk_rtseck; - uint sitk_rtcalk; - char res2[0x10]; - uint sitk_piscrk; - uint sitk_pitck; - char res3[0x38]; -} sitk8xx_t; - -/* Clocks and reset keys. -*/ -typedef struct cark { - uint cark_sccrk; - uint cark_plprcrk; - uint cark_rsrk; - char res[0x474]; -} cark8xx_t; - -/* The key to unlock registers maintained by keep-alive power. -*/ -#define KAPWR_KEY ((unsigned int)0x55ccaa33) - -/* Video interface. MPC823 Only. -*/ -typedef struct vid823 { - ushort vid_vccr; - ushort res1; - u_char vid_vsr; - u_char res2; - u_char vid_vcmr; - u_char res3; - uint vid_vbcb; - uint res4; - uint vid_vfcr0; - uint vid_vfaa0; - uint vid_vfba0; - uint vid_vfcr1; - uint vid_vfaa1; - uint vid_vfba1; - u_char res5[0x18]; -} vid823_t; - -/* LCD interface. 823 Only. -*/ -typedef struct lcd { - uint lcd_lccr; - uint lcd_lchcr; - uint lcd_lcvcr; - char res1[4]; - uint lcd_lcfaa; - uint lcd_lcfba; - char lcd_lcsr; - char res2[0x7]; -} lcd823_t; - -/* I2C -*/ -typedef struct i2c { - u_char i2c_i2mod; - char res1[3]; - u_char i2c_i2add; - char res2[3]; - u_char i2c_i2brg; - char res3[3]; - u_char i2c_i2com; - char res4[3]; - u_char i2c_i2cer; - char res5[3]; - u_char i2c_i2cmr; - char res6[0x8b]; -} i2c8xx_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - char res1[4]; - uint sdma_sdar; - u_char sdma_sdsr; - char res3[3]; - u_char sdma_sdmr; - char res4[3]; - u_char sdma_idsr1; - char res5[3]; - u_char sdma_idmr1; - char res6[3]; - u_char sdma_idsr2; - char res7[3]; - u_char sdma_idmr2; - char res8[0x13]; -} sdma8xx_t; - -/* Communication Processor Module Interrupt Controller. -*/ -typedef struct cpm_ic { - ushort cpic_civr; - char res[0xe]; - uint cpic_cicr; - uint cpic_cipr; - uint cpic_cimr; - uint cpic_cisr; -} cpic8xx_t; - -/* Input/Output Port control/status registers. -*/ -typedef struct io_port { - ushort iop_padir; - ushort iop_papar; - ushort iop_paodr; - ushort iop_padat; - char res1[8]; - ushort iop_pcdir; - ushort iop_pcpar; - ushort iop_pcso; - ushort iop_pcdat; - ushort iop_pcint; - char res2[6]; - ushort iop_pddir; - ushort iop_pdpar; - char res3[2]; - ushort iop_pddat; - uint utmode; - char res4[4]; -} iop8xx_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - ushort cpmt_tgcr; - char res1[0xe]; - ushort cpmt_tmr1; - ushort cpmt_tmr2; - ushort cpmt_trr1; - ushort cpmt_trr2; - ushort cpmt_tcr1; - ushort cpmt_tcr2; - ushort cpmt_tcn1; - ushort cpmt_tcn2; - ushort cpmt_tmr3; - ushort cpmt_tmr4; - ushort cpmt_trr3; - ushort cpmt_trr4; - ushort cpmt_tcr3; - ushort cpmt_tcr4; - ushort cpmt_tcn3; - ushort cpmt_tcn4; - ushort cpmt_ter1; - ushort cpmt_ter2; - ushort cpmt_ter3; - ushort cpmt_ter4; - char res2[8]; -} cpmtimer8xx_t; - -/* Finally, the Communication Processor stuff..... -*/ -typedef struct scc { /* Serial communication channels */ - uint scc_gsmrl; - uint scc_gsmrh; - ushort scc_psmr; - char res1[2]; - ushort scc_todr; - ushort scc_dsr; - ushort scc_scce; - char res2[2]; - ushort scc_sccm; - char res3; - u_char scc_sccs; - char res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - char res1[2]; - ushort smc_smcmr; - char res2[2]; - u_char smc_smce; - char res3[3]; - u_char smc_smcm; - char res4[5]; -} smc_t; - -/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but - * it fits within the address space. - */ - -typedef struct fec { - uint fec_addr_low; /* lower 32 bits of station address */ - ushort fec_addr_high; /* upper 16 bits of station address */ - ushort res1; /* reserved */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ - uint fec_r_des_start; /* beginning of Rx descriptor ring */ - uint fec_x_des_start; /* beginning of Tx descriptor ring */ - uint fec_r_buff_size; /* Rx buffer size */ - uint res2[9]; /* reserved */ - uint fec_ecntrl; /* ethernet control register */ - uint fec_ievent; /* interrupt event register */ - uint fec_imask; /* interrupt mask register */ - uint fec_ivec; /* interrupt level and vector status */ - uint fec_r_des_active; /* Rx ring updated flag */ - uint fec_x_des_active; /* Tx ring updated flag */ - uint res3[10]; /* reserved */ - uint fec_mii_data; /* MII data register */ - uint fec_mii_speed; /* MII speed control register */ - uint res4[17]; /* reserved */ - uint fec_r_bound; /* end of RAM (read-only) */ - uint fec_r_fstart; /* Rx FIFO start address */ - uint res5[6]; /* reserved */ - uint fec_x_fstart; /* Tx FIFO start address */ - uint res6[17]; /* reserved */ - uint fec_fun_code; /* fec SDMA function code */ - uint res7[3]; /* reserved */ - uint fec_r_cntrl; /* Rx control register */ - uint fec_r_hash; /* Rx hash register */ - uint res8[14]; /* reserved */ - uint fec_x_cntrl; /* Tx control register */ - uint res9[0x1e]; /* reserved */ -} fec_t; - -/* The FEC and LCD color map share the same address space.... - * I guess we will never see an 823T :-). - */ -union fec_lcd { - fec_t fl_un_fec; - u_char fl_un_cmap[0x200]; -}; - -typedef struct comm_proc { - /* General control and status registers. - */ - ushort cp_cpcr; - u_char res1[2]; - ushort cp_rccr; - u_char res2; - u_char cp_rmds; - u_char res3[4]; - ushort cp_cpmcr1; - ushort cp_cpmcr2; - ushort cp_cpmcr3; - ushort cp_cpmcr4; - u_char res4[2]; - ushort cp_rter; - u_char res5[2]; - ushort cp_rtmr; - u_char res6[0x14]; - - /* Baud rate generators. - */ - uint cp_brgc1; - uint cp_brgc2; - uint cp_brgc3; - uint cp_brgc4; - - /* Serial Communication Channels. - */ - scc_t cp_scc[4]; - - /* Serial Management Channels. - */ - smc_t cp_smc[2]; - - /* Serial Peripheral Interface. - */ - ushort cp_spmode; - u_char res7[4]; - u_char cp_spie; - u_char res8[3]; - u_char cp_spim; - u_char res9[2]; - u_char cp_spcom; - u_char res10[2]; - - /* Parallel Interface Port. - */ - u_char res11[2]; - ushort cp_pipc; - u_char res12[2]; - ushort cp_ptpr; - uint cp_pbdir; - uint cp_pbpar; - u_char res13[2]; - ushort cp_pbodr; - uint cp_pbdat; - - /* Port E - MPC87x/88x only. - */ - uint cp_pedir; - uint cp_pepar; - uint cp_peso; - uint cp_peodr; - uint cp_pedat; - - /* Communications Processor Timing Register - - Contains RMII Timing for the FECs on MPC87x/88x only. - */ - uint cp_cptr; - - /* Serial Interface and Time Slot Assignment. - */ - uint cp_simode; - u_char cp_sigmr; - u_char res15; - u_char cp_sistr; - u_char cp_sicmr; - u_char res16[4]; - uint cp_sicr; - uint cp_sirp; - u_char res17[0xc]; - - /* 256 bytes of MPC823 video controller RAM array. - */ - u_char cp_vcram[0x100]; - u_char cp_siram[0x200]; - - /* The fast ethernet controller is not really part of the CPM, - * but it resides in the address space. - * The LCD color map is also here. - */ - union fec_lcd fl_un; -#define cp_fec fl_un.fl_un_fec -#define lcd_cmap fl_un.fl_un_cmap - char res18[0xE00]; - - /* The MPC885 family has a second FEC here */ - fec_t cp_fec2; -#define cp_fec1 cp_fec /* consistency macro */ - - /* Dual Ported RAM follows. - * There are many different formats for this memory area - * depending upon the devices used and options chosen. - * Some processors don't have all of it populated. - */ - u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ - - /* Parameter RAM */ - union { - u_char cp_dparam[0x400]; - u16 cp_dparam16[0x200]; - }; -} cpm8xx_t; - -/* Internal memory map. -*/ -typedef struct immap { - sysconf8xx_t im_siu_conf; /* SIU Configuration */ - pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ - memctl8xx_t im_memctl; /* Memory Controller */ - sit8xx_t im_sit; /* System integration timers */ - car8xx_t im_clkrst; /* Clocks and reset */ - sitk8xx_t im_sitk; /* Sys int timer keys */ - cark8xx_t im_clkrstk; /* Clocks and reset keys */ - vid823_t im_vid; /* Video (823 only) */ - lcd823_t im_lcd; /* LCD (823 only) */ - i2c8xx_t im_i2c; /* I2C control/status */ - sdma8xx_t im_sdma; /* SDMA control/status */ - cpic8xx_t im_cpic; /* CPM Interrupt Controller */ - iop8xx_t im_ioport; /* IO Port control/status */ - cpmtimer8xx_t im_cpmtimer; /* CPM timers */ - cpm8xx_t im_cpm; /* Communication processor */ -} immap_t; - -#endif /* __IMMAP_8XX__ */ diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index d3a83910b6..20c52fcddc 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -7,9 +7,7 @@ #include <asm/processor.h> /* bytes per L1 cache line */ -#if defined(CONFIG_8xx) -#define L1_CACHE_SHIFT 4 -#elif defined(CONFIG_PPC64BRIDGE) +#if defined(CONFIG_PPC64BRIDGE) #define L1_CACHE_SHIFT 7 #elif defined(CONFIG_E500MC) #define L1_CACHE_SHIFT 6 @@ -72,41 +70,4 @@ void disable_cpc_sram(void); #define L2CACHE_NONE 0x03 /* NONE */ #define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ -#ifdef CONFIG_8xx -/* Cache control on the MPC8xx is provided through some additional - * special purpose registers. - */ -#define IC_CST 560 /* Instruction cache control/status */ -#define IC_ADR 561 /* Address needed for some commands */ -#define IC_DAT 562 /* Read-only data register */ -#define DC_CST 568 /* Data cache control/status */ -#define DC_ADR 569 /* Address needed for some commands */ -#define DC_DAT 570 /* Read-only data register */ - -/* Commands. Only the first few are available to the instruction cache. -*/ -#define IDC_ENABLE 0x02000000 /* Cache enable */ -#define IDC_DISABLE 0x04000000 /* Cache disable */ -#define IDC_LDLCK 0x06000000 /* Load and lock */ -#define IDC_UNLINE 0x08000000 /* Unlock line */ -#define IDC_UNALL 0x0a000000 /* Unlock all */ -#define IDC_INVALL 0x0c000000 /* Invalidate all */ - -#define DC_FLINE 0x0e000000 /* Flush data cache line */ -#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ -#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ -#define DC_SLES 0x05000000 /* Set little endian swap mode */ -#define DC_CLES 0x07000000 /* Clear little endian swap mode */ - -/* Status. -*/ -#define IDC_ENABLED 0x80000000 /* Cache is enabled */ -#define IDC_CERR1 0x00200000 /* Cache error 1 */ -#define IDC_CERR2 0x00100000 /* Cache error 2 */ -#define IDC_CERR3 0x00080000 /* Cache error 3 */ - -#define DC_DFWT 0x40000000 /* Data cache is forced write through */ -#define DC_LES 0x20000000 /* Caches are little endian mode */ -#endif /* CONFIG_8xx */ - #endif diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 3943d0e92b..cdf4be2c76 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -19,9 +19,6 @@ struct arch_global_data { u8 sdhc_adapter; #endif #endif -#if defined(CONFIG_8xx) - unsigned long brg_clk; -#endif #if defined(CONFIG_CPM2) /* There are many clocks on the MPC8260 - see page 9-5 */ unsigned long vco_out; diff --git a/arch/powerpc/include/asm/iopin_8xx.h b/arch/powerpc/include/asm/iopin_8xx.h deleted file mode 100644 index 8db0fa2a1c..0000000000 --- a/arch/powerpc/include/asm/iopin_8xx.h +++ /dev/null @@ -1,379 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC8xx I/O port pin manipulation functions - * Roughly based on iopin_8260.h - */ - -#ifndef _ASM_IOPIN_8XX_H_ -#define _ASM_IOPIN_8XX_H_ - -#include <linux/types.h> -#include <asm/8xx_immap.h> - -#ifdef __KERNEL__ - -typedef struct { - u_char port:2; /* port number (A=0, B=1, C=2, D=3) */ - u_char pin:5; /* port pin (0-31) */ - u_char flag:1; /* for whatever */ -} iopin_t; - -#define IOPIN_PORTA 0 -#define IOPIN_PORTB 1 -#define IOPIN_PORTC 2 -#define IOPIN_PORTD 3 - -static __inline__ void -iopin_set_high(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat; - *datp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat; - *datp |= (1 << (31 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat; - *datp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat; - *datp |= (1 << (15 - iopin->pin)); - } -} - -static __inline__ void -iopin_set_low(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat; - *datp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat; - *datp &= ~(1 << (31 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat; - *datp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat; - *datp &= ~(1 << (15 - iopin->pin)); - } -} - -static __inline__ uint -iopin_is_high(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat; - return (*datp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat; - return (*datp >> (31 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat; - return (*datp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat; - return (*datp >> (15 - iopin->pin)) & 1; - } - return 0; -} - -static __inline__ uint -iopin_is_low(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat; - return ((*datp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat; - return ((*datp >> (31 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat; - return ((*datp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat; - return ((*datp >> (15 - iopin->pin)) & 1) ^ 1; - } - return 0; -} - -static __inline__ void -iopin_set_out(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir; - *dirp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir; - *dirp |= (1 << (31 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir; - *dirp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir; - *dirp |= (1 << (15 - iopin->pin)); - } -} - -static __inline__ void -iopin_set_in(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir; - *dirp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir; - *dirp &= ~(1 << (31 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir; - *dirp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir; - *dirp &= ~(1 << (15 - iopin->pin)); - } -} - -static __inline__ uint -iopin_is_out(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir; - return (*dirp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir; - return (*dirp >> (31 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir; - return (*dirp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir; - return (*dirp >> (15 - iopin->pin)) & 1; - } - return 0; -} - -static __inline__ uint -iopin_is_in(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir; - return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir; - return ((*dirp >> (31 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir; - return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir; - return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1; - } - return 0; -} - -static __inline__ void -iopin_set_odr(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr; - *odrp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr; - *odrp |= (1 << (31 - iopin->pin)); - } -} - -static __inline__ void -iopin_set_act(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr; - *odrp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr; - *odrp &= ~(1 << (31 - iopin->pin)); - } -} - -static __inline__ uint -iopin_is_odr(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr; - return (*odrp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr; - return (*odrp >> (31 - iopin->pin)) & 1; - } - return 0; -} - -static __inline__ uint -iopin_is_act(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr; - return ((*odrp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr; - return ((*odrp >> (31 - iopin->pin)) & 1) ^ 1; - } - return 0; -} - -static __inline__ void -iopin_set_ded(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar; - *parp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar; - *parp |= (1 << (31 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar; - *parp |= (1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar; - *parp |= (1 << (15 - iopin->pin)); - } -} - -static __inline__ void -iopin_set_gen(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar; - *parp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar; - *parp &= ~(1 << (31 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar; - *parp &= ~(1 << (15 - iopin->pin)); - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar; - *parp &= ~(1 << (15 - iopin->pin)); - } -} - -static __inline__ uint -iopin_is_ded(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar; - return (*parp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar; - return (*parp >> (31 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar; - return (*parp >> (15 - iopin->pin)) & 1; - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar; - return (*parp >> (15 - iopin->pin)) & 1; - } - return 0; -} - -static __inline__ uint -iopin_is_gen(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTA) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar; - return ((*parp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTB) { - volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar; - return ((*parp >> (31 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTC) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar; - return ((*parp >> (15 - iopin->pin)) & 1) ^ 1; - } else if (iopin->port == IOPIN_PORTD) { - volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar; - return ((*parp >> (15 - iopin->pin)) & 1) ^ 1; - } - return 0; -} - -static __inline__ void -iopin_set_opt2(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso; - *sorp |= (1 << (15 - iopin->pin)); - } -} - -static __inline__ void -iopin_set_opt1(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso; - *sorp &= ~(1 << (15 - iopin->pin)); - } -} - -static __inline__ uint -iopin_is_opt2(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso; - return (*sorp >> (15 - iopin->pin)) & 1; - } - return 0; -} - -static __inline__ uint -iopin_is_opt1(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso; - return ((*sorp >> (15 - iopin->pin)) & 1) ^ 1; - } - return 0; -} - -static __inline__ void -iopin_set_falledge(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint; - *intp |= (1 << (15 - iopin->pin)); - } -} - -static __inline__ void -iopin_set_anyedge(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint; - *intp &= ~(1 << (15 - iopin->pin)); - } -} - -static __inline__ uint -iopin_is_falledge(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint; - return (*intp >> (15 - iopin->pin)) & 1; - } - return 0; -} - -static __inline__ uint -iopin_is_anyedge(iopin_t *iopin) -{ - if (iopin->port == IOPIN_PORTC) { - volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint; - return ((*intp >> (15 - iopin->pin)) & 1) ^ 1; - } - return 0; -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IOPIN_8XX_H_ */ diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h index 4e1c5965e4..8abe727bca 100644 --- a/arch/powerpc/include/asm/ppc.h +++ b/arch/powerpc/include/asm/ppc.h @@ -13,19 +13,7 @@ #ifndef __ASSEMBLY__ -#if defined(CONFIG_8xx) -#include <asm/8xx_immap.h> -#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ - defined(CONFIG_MPC866) || defined(CONFIG_MPC866P) -# define CONFIG_MPC866_FAMILY 1 -#elif defined(CONFIG_MPC885) -# define CONFIG_MPC885_FAMILY 1 -#endif -#if defined(CONFIG_MPC860) || defined(CONFIG_MPC860T) || \ - defined(CONFIG_MPC866_FAMILY) || defined(CONFIG_MPC885_FAMILY) -# define CONFIG_MPC86x 1 -#endif -#elif defined(CONFIG_5xx) +#if defined(CONFIG_5xx) #include <asm/5xx_immap.h> #elif defined(CONFIG_MPC5xxx) #include <mpc5xxx.h> @@ -62,29 +50,7 @@ #include <asm/arch/immap_lsch2.h> #endif -/* - * enable common handling for all TQM8xxL/M boards: - * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards - * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards - * and for the TQM885D board - */ -#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ - defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) -# ifndef CONFIG_TQM8xxM -# define CONFIG_TQM8xxM -# endif -#endif -#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ - defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ - defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ - defined(CONFIG_TQM885D) -# ifndef CONFIG_TQM8xxL -# define CONFIG_TQM8xxL -# endif -#endif - -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) +#if defined(CONFIG_5xx) uint get_immr(uint); #endif #if defined(CONFIG_MPC5xxx) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index fd38da9fe5..aaabae0401 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1361,10 +1361,7 @@ int prt_8260_clks(void); #endif /* ndef ASSEMBLY*/ #ifdef CONFIG_MACH_SPECIFIC -#if defined(CONFIG_8xx) -#define _machine _MACH_8xx -#define have_of 0 -#elif defined(CONFIG_WALNUT) +#if defined(CONFIG_WALNUT) #define _machine _MACH_walnut #define have_of 0 #elif defined(CONFIG_MPC8260) diff --git a/arch/powerpc/include/asm/status_led.h b/arch/powerpc/include/asm/status_led.h index 1ae1b17e2d..c151b54060 100644 --- a/arch/powerpc/include/asm/status_led.h +++ b/arch/powerpc/include/asm/status_led.h @@ -9,9 +9,7 @@ /* if not overridden */ #ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC -# if defined(CONFIG_8xx) -# include <mpc8xx.h> -# elif defined(CONFIG_MPC8260) +# if defined(CONFIG_MPC8260) # include <mpc8260.h> # elif defined(CONFIG_5xx) # include <mpc5xx.h> diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e09bd9a88a..5e55385e01 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -36,7 +36,6 @@ obj-y += extable.o obj-$(CONFIG_CMD_IMMAP) += immap.o obj-y += interrupts.o obj-$(CONFIG_CMD_KGDB) += kgdb.o -obj-$(CONFIG_IDE) += ide.o obj-y += stack.o obj-y += time.o diff --git a/arch/powerpc/lib/ide.c b/arch/powerpc/lib/ide.c deleted file mode 100644 index b4ead726a6..0000000000 --- a/arch/powerpc/lib/ide.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * (C) Copyright 2000-2011 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Code taken from cmd_ide.c */ -#include <common.h> -#include <ata.h> -#include "ide.h" - -#ifdef CONFIG_IDE_8xx_DIRECT -#include <mpc8xx.h> -#include <pcmcia.h> -DECLARE_GLOBAL_DATA_PTR; - -/* Timings for IDE Interface - * - * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk - * 70 165 30 PIO-Mode 0, [ns] - * 4 9 2 [Cycles] - * 50 125 20 PIO-Mode 1, [ns] - * 3 7 2 [Cycles] - * 30 100 15 PIO-Mode 2, [ns] - * 2 6 1 [Cycles] - * 30 80 10 PIO-Mode 3, [ns] - * 2 5 1 [Cycles] - * 25 70 10 PIO-Mode 4, [ns] - * 2 4 1 [Cycles] - */ - -static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = { - /* Setup Length Hold */ - { 70, 165, 30 }, /* PIO-Mode 0, [ns] */ - { 50, 125, 20 }, /* PIO-Mode 1, [ns] */ - { 30, 101, 15 }, /* PIO-Mode 2, [ns] */ - { 30, 80, 10 }, /* PIO-Mode 3, [ns] */ - { 25, 70, 10 }, /* PIO-Mode 4, [ns] */ -}; - -static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1]; - -#ifndef CONFIG_SYS_PIO_MODE -#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */ -#endif -static int pio_mode = CONFIG_SYS_PIO_MODE; - -/* Make clock cycles and always round up */ - -#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U) - -static void set_pcmcia_timing(int pmode) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); - ulong timings; - - debug("Set timing for PIO Mode %d\n", pmode); - - timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold) - | PCMCIA_SST(pio_config_clk[pmode].t_setup) - | PCMCIA_SL(pio_config_clk[pmode].t_length); - - /* - * IDE 0 - */ - pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0; -#if (CONFIG_SYS_PCMCIA_POR0 != 0) - pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings; -#else - pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0; -#endif - debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0); - - pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1; -#if (CONFIG_SYS_PCMCIA_POR1 != 0) - pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings; -#else - pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1; -#endif - debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1); - - pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2; -#if (CONFIG_SYS_PCMCIA_POR2 != 0) - pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings; -#else - pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2; -#endif - debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2); - - pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3; -#if (CONFIG_SYS_PCMCIA_POR3 != 0) - pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings; -#else - pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3; -#endif - debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3); - - /* - * IDE 1 - */ - pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4; -#if (CONFIG_SYS_PCMCIA_POR4 != 0) - pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings; -#else - pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4; -#endif - debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4); - - pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5; -#if (CONFIG_SYS_PCMCIA_POR5 != 0) - pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings; -#else - pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5; -#endif - debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5); - - pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6; -#if (CONFIG_SYS_PCMCIA_POR6 != 0) - pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings; -#else - pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6; -#endif - debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6); - - pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7; -#if (CONFIG_SYS_PCMCIA_POR7 != 0) - pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings; -#else - pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7; -#endif - debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7); - -} - -int ide_preinit(void) -{ - int i; - /* Initialize PIO timing tables */ - for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) { - pio_config_clk[i].t_setup = - PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk); - pio_config_clk[i].t_length = - PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk); - pio_config_clk[i].t_hold = - PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk); - debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk" - " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup, - pio_config_clk[i].t_setup, pio_config_ns[i].t_length, - pio_config_clk[i].t_length, pio_config_ns[i].t_hold, - pio_config_clk[i].t_hold); - } - - return 0; -} - -int ide_init_postreset(void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); - - /* PCMCIA / IDE initialization for common mem space */ - pcmp->pcmc_pgcrb = 0; - - /* start in PIO mode 0 - most relaxed timings */ - pio_mode = 0; - set_pcmcia_timing(pio_mode); - return 0; -} -#endif /* CONFIG_IDE_8xx_DIRECT */ - -#ifdef CONFIG_IDE_8xx_PCCARD -int ide_preinit(void) -{ - ide_devices_found = 0; - /* initialize the PCMCIA IDE adapter card */ - pcmcia_on(); - if (!ide_devices_found) - return 1; - udelay(1000000);/* 1 s */ - return 0; -} -#endif diff --git a/arch/powerpc/lib/ide.h b/arch/powerpc/lib/ide.h deleted file mode 100644 index e0b2e6197b..0000000000 --- a/arch/powerpc/lib/ide.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * (C) Copyright 2012 - * Pavel Herrmann <morpheus.ibis@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _MPC8XX_IDE_H_ -#define _MPC8XX_IDE_H_ 1 - -#ifdef CONFIG_IDE_8xx_PCCARD -int pcmcia_on(void); -extern int ide_devices_found; -#endif -#endif diff --git a/arch/powerpc/lib/immap.c b/arch/powerpc/lib/immap.c index 1414f9ad55..85527a1b8f 100644 --- a/arch/powerpc/lib/immap.c +++ b/arch/powerpc/lib/immap.c @@ -12,17 +12,11 @@ #include <common.h> #include <command.h> -#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) -#if defined(CONFIG_8xx) -#include <asm/8xx_immap.h> -#include <commproc.h> -#include <asm/iopin_8xx.h> -#elif defined(CONFIG_MPC8260) #include <asm/immap_8260.h> #include <asm/cpm_8260.h> #include <asm/iopin_8260.h> -#endif DECLARE_GLOBAL_DATA_PTR; @@ -38,19 +32,12 @@ do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_8xx) - volatile sysconf8xx_t *sc = &immap->im_siu_conf; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) volatile sysconf8260_t *sc = &immap->im_siu_conf; #endif printf ("SIUMCR= %08x SYPCR = %08x\n", sc->sc_siumcr, sc->sc_sypcr); -#if defined(CONFIG_8xx) - printf ("SWT = %08x\n", sc->sc_swt); - printf ("SIPEND= %08x SIMASK= %08x\n", sc->sc_sipend, sc->sc_simask); - printf ("SIEL = %08x SIVEC = %08x\n", sc->sc_siel, sc->sc_sivec); - printf ("TESR = %08x SDCR = %08x\n", sc->sc_tesr, sc->sc_sdcr); -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) printf ("BCR = %08x\n", sc->sc_bcr); printf ("P_ACR = %02x P_ALRH= %08x P_ALRL= %08x\n", sc->sc_ppc_acr, sc->sc_ppc_alrh, sc->sc_ppc_alrl); @@ -69,10 +56,7 @@ do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_8xx) - volatile memctl8xx_t *memctl = &immap->im_memctl; - int nbanks = 8; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) volatile memctl8260_t *memctl = &immap->im_memctl; int nbanks = 12; #endif @@ -90,16 +74,12 @@ do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } printf ("MAR = %08x", memctl->memc_mar); -#if defined(CONFIG_8xx) - printf (" MCR = %08x\n", memctl->memc_mcr); -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) putc ('\n'); #endif printf ("MAMR = %08x MBMR = %08x", memctl->memc_mamr, memctl->memc_mbmr); -#if defined(CONFIG_8xx) - printf ("\nMSTAT = %04x\n", memctl->memc_mstat); -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) printf (" MCMR = %08x\n", memctl->memc_mcmr); #endif printf ("MPTPR = %04x MDR = %08x\n", @@ -137,17 +117,11 @@ do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_8xx) - volatile car8xx_t *car = &immap->im_clkrst; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) volatile car8260_t *car = &immap->im_clkrst; #endif -#if defined(CONFIG_8xx) - printf ("SCCR = %08x\n", car->car_sccr); - printf ("PLPRCR= %08x\n", car->car_plprcr); - printf ("RSR = %08x\n", car->car_rsr); -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) printf ("SCCR = %08x\n", car->car_sccr); printf ("SCMR = %08x\n", car->car_scmr); printf ("RSR = %08x\n", car->car_rsr); @@ -200,14 +174,7 @@ static void binary (char *label, uint value, int nbits) putc ('\n'); } -#if defined(CONFIG_8xx) -#define PA_NBITS 16 -#define PA_NB_ODR 8 -#define PB_NBITS 18 -#define PB_NB_ODR 16 -#define PC_NBITS 12 -#define PD_NBITS 13 -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) #define PA_NBITS 32 #define PA_NB_ODR 32 #define PB_NBITS 28 @@ -221,10 +188,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_8xx) - volatile iop8xx_t *iop = &immap->im_ioport; - volatile ushort *l, *r; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) volatile iop8260_t *iop = &immap->im_ioport; volatile uint *l, *r; #endif @@ -237,10 +201,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Ports A & B */ -#if defined(CONFIG_8xx) - l = &iop->iop_padir; - R = &immap->im_cpm.cp_pbdir; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) l = &iop->iop_pdira; R = &iop->iop_pdirb; #endif @@ -263,10 +224,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Ports C & D */ -#if defined(CONFIG_8xx) - l = &iop->iop_pcdir; - r = &iop->iop_pddir; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) l = &iop->iop_pdirc; r = &iop->iop_pdird; #endif @@ -274,11 +232,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) binary ("PD_DIR", *r++, PD_NBITS); binary ("PC_PAR", *l++, PC_NBITS); binary ("PD_PAR", *r++, PD_NBITS); -#if defined(CONFIG_8xx) - binary ("PC_SO ", *l++, PC_NBITS); - binary (" ", 0, 0); - r++; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) binary ("PC_SOR", *l++, PC_NBITS); binary ("PD_SOR", *r++, PD_NBITS); binary ("PC_ODR", *l++, PC_NBITS); @@ -286,9 +240,6 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif binary ("PC_DAT", *l++, PC_NBITS); binary ("PD_DAT", *r++, PD_NBITS); -#if defined(CONFIG_8xx) - binary ("PC_INT", *l++, PC_NBITS); -#endif header (); return 0; @@ -313,9 +264,6 @@ do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) SOR, ODR, DAT, -#if defined(CONFIG_8xx) - INT -#endif } cmd = DAT; if (argc != 5) { @@ -350,11 +298,6 @@ do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) case 's': cmd = SOR; break; -#if defined(CONFIG_8xx) - case 'i': - cmd = INT; - break; -#endif default: printf ("iopset: unknown command %s\n", argv[3]); rcode = 1; @@ -400,14 +343,6 @@ do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else iopin_set_low (&iopin); break; -#if defined(CONFIG_8xx) - case INT: - if (value) - iopin_set_falledge (&iopin); - else - iopin_set_anyedge (&iopin); - break; -#endif } } @@ -434,9 +369,7 @@ static void prbrg (int n, uint val) uint cd = (val & CPM_BRG_CD_MASK) >> 1; uint div16 = (val & CPM_BRG_DIV16) != 0; -#if defined(CONFIG_8xx) - ulong clock = gd->cpu_clk; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) ulong clock = gd->arch.brg_clk; #endif @@ -486,10 +419,7 @@ do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_8xx) - volatile cpm8xx_t *cp = &immap->im_cpm; - volatile uint *p = &cp->cp_brgc1; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) volatile uint *p = &immap->im_brgc1; #endif int i = 1; @@ -510,11 +440,7 @@ do_i2cinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#if defined(CONFIG_8xx) - volatile i2c8xx_t *i2c = &immap->im_i2c; - volatile cpm8xx_t *cp = &immap->im_cpm; - volatile iic_t *iip = (iic_t *) & cp->cp_dparam[PROFF_IIC]; -#elif defined(CONFIG_MPC8260) +#if defined(CONFIG_MPC8260) volatile i2c8260_t *i2c = &immap->im_i2c; volatile iic_t *iip; uint dpaddr; diff --git a/arch/powerpc/lib/time.c b/arch/powerpc/lib/time.c index de5f0be66d..c1a0a69a51 100644 --- a/arch/powerpc/lib/time.c +++ b/arch/powerpc/lib/time.c @@ -64,7 +64,7 @@ int timer_init(void) { unsigned long temp; -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) +#if defined(CONFIG_5xx) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; /* unlock */ @@ -75,7 +75,7 @@ int timer_init(void) asm volatile("li %0,0 ; mttbu %0 ; mttbl %0;" : "=&r"(temp) ); -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) +#if defined(CONFIG_5xx) /* enable */ immap->im_sit.sit_tbscr |= TBSCR_TBE; #endif |