summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README37
1 files changed, 0 insertions, 37 deletions
diff --git a/README b/README
index b0a1b26605..4cb32f18a8 100644
--- a/README
+++ b/README
@@ -3422,43 +3422,6 @@ environment in RAM: we could work on NVRAM directly, but we want to
keep settings there always unmodified except somebody uses "saveenv"
to save the current settings.
-- CONFIG_ENV_IS_IN_SPI_FLASH:
-
- Define this if you have a SPI Flash memory device which you
- want to use for the environment.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_SIZE:
-
- These two #defines specify the offset and size of the
- environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
- aligned to an erase sector boundary.
-
- - CONFIG_ENV_SECT_SIZE:
-
- Define the SPI flash's sector size.
-
- - CONFIG_ENV_OFFSET_REDUND (optional):
-
- This setting describes a second storage area of CONFIG_ENV_SIZE
- size used to hold a redundant copy of the environment data, so
- that there is a valid backup copy in case there is a power failure
- during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
- aligned to an erase sector boundary.
-
- - CONFIG_ENV_SPI_BUS (optional):
- - CONFIG_ENV_SPI_CS (optional):
-
- Define the SPI bus and chip select. If not defined they will be 0.
-
- - CONFIG_ENV_SPI_MAX_HZ (optional):
-
- Define the SPI max work clock. If not defined then use 1MHz.
-
- - CONFIG_ENV_SPI_MODE (optional):
-
- Define the SPI work mode. If not defined then use SPI_MODE_3.
-
- CONFIG_ENV_IS_IN_REMOTE:
Define this if you have a remote memory space which you