Merge tag 'v2021.07-rc5' into next

Prepare v2021.07-rc5

# gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	configs/am64x_evm_r5_defconfig

36 files changed, 527 insertions, 193 deletions

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 3895c2d0c7..715154a0dd 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -92,7 +92,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM	0
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 
 /*
  * DDR Setup
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index b1acb564c3..7bc792b8d1 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -618,7 +618,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 /*
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index e467ef453d..9449e30bfc 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -537,8 +537,12 @@ unsigned long get_board_ddr_clk(void);
 #define RGMII_PHY2_ADDR		0x02
 #define CORTINA_PHY_ADDR1	0x0c  /* Cortina CS4315 */
 #define CORTINA_PHY_ADDR2	0x0d
-#define FM1_10GEC3_PHY_ADDR	0x00  /* Aquantia AQ1202 10G Base-T */
+/* Aquantia AQ1202 10G Base-T used by board revisions up to C */
+#define FM1_10GEC3_PHY_ADDR	0x00
 #define FM1_10GEC4_PHY_ADDR	0x01
+/* Aquantia AQR113C 10G Base-T used by board revisions D and up */
+#define AQR113C_PHY_ADDR1	0x00
+#define AQR113C_PHY_ADDR2	0x08
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -574,7 +578,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 /*
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index a04d9137b3..139beae08d 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -585,7 +585,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 
diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h
new file mode 100644
index 0000000000..15c50279ad
--- /dev/null
+++ b/include/configs/cgtqmx8.h
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2018 NXP
+ * Copyright 2018 congatec AG
+ *
+ */
+
+#ifndef __CGTQMX8_H
+#define __CGTQMX8_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_TEXT_BASE				0x0
+#define CONFIG_SPL_MAX_SIZE				(124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
+
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK		0x013E000
+#define CONFIG_SPL_BSS_START_ADDR	0x00128000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x00120000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
+#define CONFIG_SERIAL_LPUART_BASE	0x5a060000
+#define CONFIG_MALLOC_F_ADDR		0x00120000
+
+#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
+
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#define CONFIG_OF_EMBED
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_BOARD_SETUP
+
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define USDHC1_BASE_ADDR		0x5B010000
+#define USDHC2_BASE_ADDR		0x5B020000
+#define USDHC3_BASE_ADDR		0x5B030000
+#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* Boot M4 */
+#define M4_BOOT_ENV \
+	"m4_0_image=m4_0.bin\0" \
+	"m4_1_image=m4_1.bin\0" \
+	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}\0" \
+	"loadm4image_1=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_1_image}\0" \
+	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
+	"m4boot_1=run loadm4image_1; dcache flush; bootaux ${loadaddr} 1\0" \
+
+#ifdef CONFIG_NAND_BOOT
+#define MFG_NAND_PARTITION "mtdparts=gpmi-nand:128m(boot),32m(kernel),16m(dtb),8m(misc),-(rootfs) "
+#else
+#define MFG_NAND_PARTITION ""
+#endif
+#define FEC0_RESET IMX_GPIO_NR(2, 5)
+#define FEC0_PDOMAIN "conn_enet0"
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+		"rdinit=/linuxrc " \
+		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+		"g_mass_storage.iSerialNumber=\"\" "\
+		MFG_NAND_PARTITION \
+		"clk_ignore_unused "\
+		"\0" \
+	"initrd_addr=0x83800000\0" \
+	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	CONFIG_MFG_ENV_SETTINGS \
+	M4_BOOT_ENV \
+	"script=boot.scr\0" \
+	"image=Image\0" \
+	"panel=NULL\0" \
+	"console=ttyLP0\0" \
+	"fdt_addr=0x83000000\0"			\
+	"boot_fdt=try\0" \
+	"fdt_file=imx8qm-cgt-qmx8.dtb\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \
+	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"echo wait for boot; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp rw earlycon\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs;  " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${loadaddr} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"booti; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else booti ${loadaddr} - ${fdt_addr}; fi"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x80280000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x80200000
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define PHYS_SDRAM_1			0x80000000
+#define PHYS_SDRAM_2			0x880000000
+#define PHYS_SDRAM_1_SIZE		0x80000000	/* 2 GB */
+#define PHYS_SDRAM_2_SIZE		0x100000000	/* 4 GB */
+
+/* Serial */
+#define CONFIG_BAUDRATE			115200
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		8000000	/* 8MHz */
+
+/* Networking */
+#define CONFIG_FEC_MXC_PHYADDR		-1
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define FEC_QUIRK_ENET_MAC
+
+#endif /* __CGTQMX8_H */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 5754b6aef0..4f2f323b77 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -65,8 +65,6 @@
  * PCI express
  */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCI_FIXUP_DEV
 #define CONFIG_PCIE_IMX
 #endif
 
@@ -82,13 +80,6 @@
 
 /* Various command support */
 
-/* Ethernet support */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE             ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE      RGMII
-#define CONFIG_FEC_MXC_PHYADDR   0
-#define CONFIG_ARP_TIMEOUT       200UL
-
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -129,7 +120,6 @@
 #define CONFIG_SERVERIP           192.168.1.146
 
 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
-	"pcidisable=1\0" \
 	"splashpos=m,m\0" \
 	"usb_pgood_delay=2000\0" \
 	"console=ttymxc1\0" \
diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 596e255ca6..985bec803a 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -31,69 +31,29 @@
 
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
-	"script=boot.scr\0" \
 	"image=Image\0" \
+	BOOTENV \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 	"console=ttymxc1,115200\0" \
-	"fdt_addr=0x43000000\0"			\
+	"fdt_addr_r=0x43000000\0"			\
 	"boot_fit=no\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
-	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
-			"bootm ${loadaddr}; " \
-		"else " \
-			"if run loadfdt; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs;  " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${loadaddr} ${image}; " \
-		"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
-			"bootm ${loadaddr}; " \
-		"else " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "fi;"
 
 /* Link Definitions */
 #define CONFIG_LOADADDR			0x40480000
diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h
index 3d7519c935..eb480a34a6 100644
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ b/include/configs/km/pg-wcom-ls102xa.h
@@ -21,6 +21,10 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
+#define CONFIG_PRAM			((CONFIG_KM_PNVRAM + \
+					  CONFIG_KM_PHRAM + \
+					  CONFIG_KM_RESERVED_PRAM) >> 10)
+
 #define CONFIG_SYS_CLK_FREQ		66666666
 /*
  * Take into account default implementation where DDR_FDBK_MULTI is consider as
@@ -43,6 +47,10 @@
 #define CONFIG_SYS_SPD_BUS_NUM		0
 #define SPD_EEPROM_ADDRESS		0x54
 
+/* POST memory regions test */
+#define CONFIG_POST			(CONFIG_SYS_POST_MEM_REGIONS)
+#define CONFIG_POST_EXTERNAL_WORD_FUNCS
+
 /*
  * IFC Definitions
  */
@@ -206,7 +214,7 @@
 
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
-#define COUNTER_FREQUENCY		12500000
+#define COUNTER_FREQUENCY		8333333
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
@@ -280,10 +288,17 @@
 		"protect on " __stringify(ENV_DEL_ADDR)			\
 		" +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"
 
+#define CONFIG_HW_ENV_SETTINGS						\
+	"hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi,"	\
+			"can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6,"	\
+			"asrc,spdif,lpuart1,ftm1\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_KM_NEW_ENV						\
 	CONFIG_KM_DEF_ENV						\
+	CONFIG_HW_ENV_SETTINGS						\
 	"EEprom_ivm=pca9547:70:9\0"					\
+	"ethrotate=no\0"						\
 	""
 
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 5f11205802..bfb4e67c8f 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -56,11 +56,6 @@
 #define CONFIG_DDR_CLK_FREQ		100000000
 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
 
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* ethernet */
 #define CONFIG_SYS_RX_ETH_BUFFER	8
 
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 9962b9872a..44f9da7306 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
+ * Copyright 2017, 2021 NXP
  */
 
 #ifndef __LS1012A2G5RDB_H__
@@ -13,11 +13,6 @@
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
@@ -72,7 +67,7 @@
 	"installer=load mmc 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size; env exists secureboot "	\
 		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
@@ -82,11 +77,11 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
 			     "env exists secureboot && esbc_halt;"
 #else
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
 			   "env exists secureboot && esbc_halt;"
 #endif
 #endif
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index a908b0acb0..6f55acc7db 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -102,11 +102,11 @@
 
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+#define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
 #else
-#define CONFIG_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+#define CONFIG_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
 #endif
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 02dd59892b..2711f651d7 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -50,16 +50,16 @@
 	"installer=load usb 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
 #endif
 
 #endif /* __LS1012ARDB_H__ */
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index ba152834d5..f8b386125c 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
  */
 
 #ifndef __LS1012AFRWY_H__
@@ -33,11 +33,6 @@
 	func(DHCP, dhcp, na)
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
@@ -89,7 +84,7 @@
 			"env exists secureboot "	\
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"sd_bootcmd=pfe stop; echo Trying load from sd card..;"		\
+	"sd_bootcmd=echo Trying load from sd card..;"		\
 		"mmcinfo; mmc read $load_addr "			\
 		"$kernel_addr_sd $kernel_size_sd ;"		\
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
@@ -100,10 +95,10 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
 			     "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
 			   "env exists secureboot && esbc_halt;"
 #endif
 
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 36be8f42c9..3e5fdadc40 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  */
 
 #ifndef __LS1012AQDS_H__
@@ -93,11 +94,6 @@
 				DSPI_CTAR_DT(0))
 #define CONFIG_SPI_FLASH_EON /* cs3 */
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
@@ -140,7 +136,7 @@
 			"env exists secureboot "	\
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe 0:0 && sf read $load_addr "	\
 		"$kernel_addr $kernel_size; env exists secureboot "	\
 		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
@@ -150,10 +146,10 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
 			     "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
 			   "env exists secureboot && esbc_halt;"
 #endif
 
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 582945b2ab..c8a2f120dc 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  * Copyright 2016 Freescale Semiconductor, Inc.
  */
 
@@ -38,12 +38,6 @@
 #define __PHY_ETH2_MASK		0xFB
 #define __PHY_ETH1_MASK		0xFD
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
@@ -91,7 +85,7 @@
 	"installer=load mmc 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size; env exists secureboot "	\
 		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
@@ -101,10 +95,10 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
 			     "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
 			   "env exists secureboot && esbc_halt;"
 #endif
 
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 31fcdae986..5900b8f0e3 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __L1028A_COMMON_H
@@ -93,11 +93,6 @@
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define OCRAM_NONSECURE_SIZE		0x00010000
 #define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
 
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 29a3790c45..65d63e2fc9 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1043A_COMMON_H
@@ -171,13 +171,6 @@
 #endif
 #endif
 
-/*  MMC  */
-#ifndef SPL_NO_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-#endif
-
 /*  DSPI  */
 #ifndef SPL_NO_DSPI
 #ifdef CONFIG_FSL_DSPI
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 0c3978a922..11e1a184c5 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1046A_COMMON_H
@@ -165,13 +165,6 @@
 						CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
-/* MMC */
-#ifndef SPL_NO_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-#endif
-
 /* FMan ucode */
 #ifndef SPL_NO_FMAN
 #define CONFIG_SYS_DPAA_FMAN
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 4d04833c50..d032a3d111 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2020 NXP
+ * Copyright 2017, 2020-2021 NXP
  */
 
 #ifndef __LS1088A_QDS_H
@@ -361,7 +361,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_MEMAC
 
 /*  MMC  */
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 6f36dd417a..5ade0eb439 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2020 NXP
+ * Copyright 2017, 2020-2021 NXP
  */
 
 #ifndef __LS1088A_RDB_H
@@ -507,11 +507,6 @@
 #endif
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #ifndef SPL_NO_ENV
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index b3fce1b7f7..41c1a86743 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2019-2020 NXP
+ * Copyright 2017, 2019-2021 NXP
  * Copyright 2015 Freescale Semiconductor
  */
 
@@ -318,11 +318,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #ifdef CONFIG_NXP_ESBC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 8626a1d5e6..f2dc495fbb 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2019-2020 NXP
+ * Copyright 2017, 2019-2021 NXP
  * Copyright 2015 Freescale Semiconductor
  */
 
@@ -300,11 +300,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 9f2b8999cd..15ea0e4ce1 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2021 NXP
  */
 
 #ifndef __LX2_COMMON_H
@@ -129,11 +129,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* SATA */
 
 #ifdef CONFIG_SCSI
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 38f50468c5..493e3de9b9 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -91,11 +91,11 @@
 #include <config_distro_bootcmd.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"scriptaddr=0x4d00000\0"	\
-	"pxefile_addr_r=0x4e00000\0"	\
-	"fdt_addr_r=0x4f00000\0"	\
-	"kernel_addr_r=0x5000000\0"	\
-	"ramdisk_addr_r=0x8000000\0"	\
+	"scriptaddr=0x6d00000\0"	\
+	"pxefile_addr_r=0x6e00000\0"	\
+	"fdt_addr_r=0x6f00000\0"	\
+	"kernel_addr_r=0x7000000\0"	\
+	"ramdisk_addr_r=0xa000000\0"	\
 	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	BOOTENV
 
diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h
new file mode 100644
index 0000000000..3be9b8ff55
--- /dev/null
+++ b/include/configs/npi_imx6ull.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (c) 2021 Linumiz
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+#ifndef _NPI_IMX6ULL_H
+#define _NPI_IMX6ULL_H
+
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* SPL options */
+#include "imx6_spl.h"
+
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+
+/* Size of malloc() poll */
+#define CONFIG_SYS_MALLOC_LEN		SZ_2M
+
+/* Console configs */
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/* MMC Configs */
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+
+#define CONFIG_NETMASK			255.255.255.0
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR	\
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* environment settings */
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		(128 << 10)
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#endif
+
+/* NAND */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	1
+
+#ifdef CONFIG_CMD_NET
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR		0x1
+#define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_ETHPRIME			"eth0"
+#endif
+
+#define CONFIG_IMX_THERMAL
+
+#define CONFIG_FEC_ENET_DEV		1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"console=ttymxc0,115200n8\0" \
+	"image=zImage\0" \
+	"fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"fdt_addr_r=0x82000000\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"pxefile_addr_r=0x87100000\0" \
+	"ramdisk_addr_r=0x82100000\0" \
+	"scriptaddr=0x87000000\0" \
+	"root=/dev/mmcblk0p2 rootwait\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(UBIFS, ubifs, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#endif /* _NPI_IMX6ULL_H */
diff --git a/include/configs/o4-imx6ull-nano.h b/include/configs/o4-imx6ull-nano.h
new file mode 100644
index 0000000000..b9746b9b1c
--- /dev/null
+++ b/include/configs/o4-imx6ull-nano.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua> */
+
+#ifndef __O4_IMX6ULL_NANO_CONFIG_H
+#define __O4_IMX6ULL_NANO_CONFIG_H
+
+#include "mx6_common.h"
+
+#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#if IS_ENABLED(CONFIG_CMD_USB)
+#	define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#endif /* CONFIG_CMD_USB */
+
+#if IS_ENABLED(CONFIG_FEC_MXC)
+#	define CONFIG_FEC_XCV_TYPE	RMII
+#endif /* CONFIG_FEC_MXC */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcargs=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcpart} console=ttymxc0,${baudrate} panic=30\0" \
+	"mmcboot=run mmcargs && ext4load mmc ${mmcdev}:${mmcpart} $loadaddr /boot/zImage && bootz $loadaddr - $fdtcontroladdr\0" \
+	"bootcmd=run mmcboot\0" \
+	"bootcmd_mfg=fastboot usb 0\0"
+
+#endif /* __O4_IMX6ULL_NANO_CONFIG_H */
diff --git a/include/configs/pg-wcom-expu1.h b/include/configs/pg-wcom-expu1.h
new file mode 100644
index 0000000000..e08d941412
--- /dev/null
+++ b/include/configs/pg-wcom-expu1.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Hitachi ABB Power Grids
+ */
+
+#ifndef __CONFIG_PG_WCOM_EXPU1_H
+#define __CONFIG_PG_WCOM_EXPU1_H
+
+#define WCOM_EXPU1
+#define CONFIG_HOSTNAME				"EXPU1"
+
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT	"ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP	"ubi1"
+
+/* CLIPS FPGA Definitions */
+#define CONFIG_SYS_CSPR3_EXT	(0x00)
+#define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \
+				CSPR_PORT_SIZE_8 | \
+				CSPR_MSEL_GPCM | \
+				CSPR_V)
+#define CONFIG_SYS_AMASK3	IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_CSOR3	(CSOR_GPCM_ADM_SHIFT(0x4) | \
+				CSOR_GPCM_TRHZ_40)
+#define CONFIG_SYS_CS3_FTIM0	(FTIM0_GPCM_TACSE(0x6) | \
+				FTIM0_GPCM_TEADC(0x7) | \
+				FTIM0_GPCM_TEAHC(0x2))
+#define CONFIG_SYS_CS3_FTIM1	(FTIM1_GPCM_TACO(0x2) | \
+				FTIM1_GPCM_TRAD(0x12))
+#define CONFIG_SYS_CS3_FTIM2	(FTIM2_GPCM_TCS(0x3) | \
+				FTIM2_GPCM_TCH(0x1) | \
+				FTIM2_GPCM_TWP(0x12))
+#define CONFIG_SYS_CS3_FTIM3	0x04000000
+
+/* PRST */
+#define WCOM_CLIPS_RST		0
+#define WCOM_QSFP_RST		1
+#define WCOM_PHY_RST		2
+#define WCOM_TMG_RST		3
+#define KM_DBG_ETH_RST		15
+
+/* QRIO GPIOs used for deblocking */
+#define KM_I2C_DEBLOCK_PORT	QRIO_GPIO_A
+#define KM_I2C_DEBLOCK_SCL	20
+#define KM_I2C_DEBLOCK_SDA	21
+
+/* ZL30343 on SPI */
+#define WCOM_ZL30343_CFG_ADDR	0xe8070000
+#define WCOM_ZL30343_SPI_BUS	0
+#define WCOM_ZL30343_CS	0
+
+#include "km/pg-wcom-ls102xa.h"
+
+#endif /* __CONFIG_PG_WCOM_EXPU1_H */
diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h
new file mode 100644
index 0000000000..50f00136ac
--- /dev/null
+++ b/include/configs/smegw01.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 NXP Semiconductors
+ * Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+ *
+ * Configuration settings for the smegw01 board.
+ */
+
+#ifndef __SMEGW01_CONFIG_H
+#define __SMEGW01_CONFIG_H
+
+#include "mx7_common.h"
+#include <imximage.h>
+
+#define PHYS_SDRAM_SIZE		SZ_512M
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)
+
+/* MMC Config*/
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"image=zImage\0" \
+	"console=ttymxc0\0" \
+	"fdtfile=imx7d-smegw01.dtb\0" \
+	"fdt_addr=0x83000000\0" \
+	"bootm_size=0x10000000\0" \
+	"mmcdev=0\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if run loadfdt; then " \
+			"bootz ${loadaddr} - ${fdt_addr}; " \
+		"fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if run loadimage; then " \
+		"run mmcboot; " \
+	"fi; " \
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#endif
diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h
index 5afdb10454..38fd775b5b 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -21,7 +21,6 @@
 /* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */
 #define CPU_RELEASE_ADDR		0xFFD12210
 #define CONFIG_SYS_CACHELINE_SIZE	64
-#define CONFIG_SYS_MEM_RESERVE_SECURE	0	/* using OCRAM, not DDR */
 
 /*
  * U-Boot console configurations
diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h
index 51445ec60a..9c021a1ef9 100644
--- a/include/configs/turris_mox.h
+++ b/include/configs/turris_mox.h
@@ -75,12 +75,22 @@
 
 #include <config_distro_bootcmd.h>
 
+#define TURRIS_MOX_BOOTCMD_RESCUE \
+	"setenv bootargs \"console=ttyMV0,115200 " \
+			  "earlycon=ar3700_uart,0xd0012000\" && " \
+	"sf probe && " \
+	"sf read 0x5000000 0x190000 && " \
+	"lzmadec 0x5000000 0x5800000 && " \
+	"bootm 0x5800000"
+
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"scriptaddr=0x4d00000\0"	\
 	"pxefile_addr_r=0x4e00000\0"	\
 	"fdt_addr_r=0x4f00000\0"	\
 	"kernel_addr_r=0x5000000\0"	\
 	"ramdisk_addr_r=0x8000000\0"	\
+	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"bootcmd_rescue=" TURRIS_MOX_BOOTCMD_RESCUE "\0" \
 	BOOTENV
 
 #endif /* _CONFIG_TURRIS_MOX_H */
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index e2a817891c..7be5e5ddf1 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -16,6 +16,8 @@
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
+
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_STACK		0x920000
 #define CONFIG_SPL_BSS_START_ADDR	0x910000
diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h
index c174f90c1a..f74dbbcf93 100644
--- a/include/dt-bindings/clock/imxrt1050-clock.h
+++ b/include/dt-bindings/clock/imxrt1050-clock.h
@@ -52,7 +52,7 @@
 #define IMXRT1050_CLK_USDHC2			43
 #define IMXRT1050_CLK_LPUART1			44
 #define IMXRT1050_CLK_SEMC			45
-#define IMXRT1050_CLK_LCDIF			46
+#define IMXRT1050_CLK_LCDIF_APB			46
 #define IMXRT1050_CLK_PLL1_ARM			47
 #define IMXRT1050_CLK_PLL2_SYS			48
 #define IMXRT1050_CLK_PLL3_USB_OTG		49
@@ -60,6 +60,8 @@
 #define IMXRT1050_CLK_PLL5_VIDEO		51
 #define IMXRT1050_CLK_PLL6_ENET			52
 #define IMXRT1050_CLK_PLL7_USB_HOST		53
-#define IMXRT1050_CLK_END			54
+#define IMXRT1050_CLK_LCDIF_PIX			54
+#define IMXRT1050_CLK_USBOH3			55
+#define IMXRT1050_CLK_END			56
 
 #endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
diff --git a/include/fsl_esdhc_imx.h b/include/fsl_esdhc_imx.h
index b092034464..45ed635a77 100644
--- a/include/fsl_esdhc_imx.h
+++ b/include/fsl_esdhc_imx.h
@@ -39,7 +39,6 @@
 #define VENDORSPEC_HCKEN	0x00001000
 #define VENDORSPEC_IPGEN	0x00000800
 #define VENDORSPEC_INIT		0x20007809
-#define VENDORSPEC_FRC_SDCLK_ON 0x00000100
 
 #define IRQSTAT			0x0002e030
 #define IRQSTAT_DMAE		(0x10000000)
@@ -97,7 +96,6 @@
 #define PRSSTAT_CINS		(0x00010000)
 #define PRSSTAT_BREN		(0x00000800)
 #define PRSSTAT_BWEN		(0x00000400)
-#define PRSSTAT_SDOFF		(0x00000080)
 #define PRSSTAT_SDSTB		(0X00000008)
 #define PRSSTAT_DLA		(0x00000004)
 #define PRSSTAT_CICHB		(0x00000002)
diff --git a/include/malloc.h b/include/malloc.h
index 024b18be00..1fbaf3755c 100644
--- a/include/malloc.h
+++ b/include/malloc.h
@@ -1,12 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
-  A version of malloc/free/realloc written by Doug Lea and released to the
-  public domain.  Send questions/comments/complaints/performance data
-  to dl@cs.oswego.edu
+  This code is based on a version of malloc/free/realloc written by Doug Lea and
+  released to the public domain. Send questions/comments/complaints/performance
+  data to dl@cs.oswego.edu
 
 * VERSION 2.6.6  Sun Mar  5 19:10:03 2000  Doug Lea  (dl at gee)
 
    Note: There may be an updated version of this malloc obtainable at
-	   ftp://g.oswego.edu/pub/misc/malloc.c
+	   http://g.oswego.edu/pub/misc/malloc.c
 	 Check before installing!
 
 * Why use this malloc?
diff --git a/include/mmc.h b/include/mmc.h
index 8600881705..6f943e78b7 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -539,18 +539,6 @@ struct dm_mmc_ops {
 
 #define mmc_get_ops(dev)        ((struct dm_mmc_ops *)(dev)->driver->ops)
 
-int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
-		    struct mmc_data *data);
-int dm_mmc_set_ios(struct udevice *dev);
-int dm_mmc_get_cd(struct udevice *dev);
-int dm_mmc_get_wp(struct udevice *dev);
-int dm_mmc_execute_tuning(struct udevice *dev, uint opcode);
-int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout_us);
-int dm_mmc_host_power_cycle(struct udevice *dev);
-int dm_mmc_deferred_probe(struct udevice *dev);
-int dm_mmc_reinit(struct udevice *dev);
-int dm_mmc_get_b_max(struct udevice *dev, void *dst, lbaint_t blkcnt);
-
 /* Transition functions for compatibility */
 int mmc_set_ios(struct mmc *mmc);
 int mmc_getcd(struct mmc *mmc);
@@ -795,6 +783,7 @@ int mmc_initialize(struct bd_info *bis);
 int mmc_init_device(int num);
 int mmc_init(struct mmc *mmc);
 int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error);
+int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data);
 
 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
     CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
diff --git a/include/net/pfe_eth/pfe/pfe_hw.h b/include/net/pfe_eth/pfe/pfe_hw.h
index c69fc69130..71e4115afa 100644
--- a/include/net/pfe_eth/pfe/pfe_hw.h
+++ b/include/net/pfe_eth/pfe/pfe_hw.h
@@ -160,4 +160,10 @@ void hif_rx_enable(void);
 void hif_rx_disable(void);
 void hif_rx_desc_disable(void);
 
+#ifdef PFE_RESET_WA
+void pfe_command_stop(int argc, char *const argv[]);
+#else
+static void pfe_command_stop(int argc, char *const argv[]) {}
+#endif
+
 #endif /* _PFE_H_ */