diff options
| author | Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> | 2020-12-04 20:17:28 +0530 |
|---|---|---|
| committer | Priyanka Jain <priyanka.jain@nxp.com> | 2020-12-10 13:56:39 +0530 |
| commit | 9ed303dfa97b773c4f4743238ea32b68e340afa9 (patch) | |
| tree | 91dde171dda2db076c4751f420a88eaee6388dd4 /include/configs/lx2160aqds.h | |
| parent | 3a187cff7ac95887917bcf25f3f575bb677a361e (diff) | |
| download | u-boot-9ed303dfa97b773c4f4743238ea32b68e340afa9.tar.gz | |
armv8: lx2162aqds: Add support for LX2162AQDS platform
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'include/configs/lx2160aqds.h')
| -rw-r--r-- | include/configs/lx2160aqds.h | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index 12884bcf2b..ea1b1635fe 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -8,70 +8,14 @@ #include "lx2160a_common.h" -/* Qixis */ -#define QIXIS_XMAP_MASK 0x07 -#define QIXIS_XMAP_SHIFT 5 -#define QIXIS_RST_CTL_RESET_EN 0x30 -#define QIXIS_LBMAP_DFLTBANK 0x00 -#define QIXIS_LBMAP_ALTBANK 0x20 -#define QIXIS_LBMAP_QSPI 0x00 -#define QIXIS_RCW_SRC_QSPI 0xff -#define QIXIS_RST_CTL_RESET 0x31 -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SD -#define QIXIS_LBMAP_EMMC -#define QIXIS_RCW_SRC_SD 0x08 -#define QIXIS_RCW_SRC_EMMC 0x09 -#define NON_EXTENDED_DUTCFG -#define QIXIS_SDID_MASK 0x07 -#define QIXIS_ESDHC_NO_ADAPTER 0x7 - -/* SYSCLK */ -#define QIXIS_SYSCLK_100 0x0 -#define QIXIS_SYSCLK_125 0x1 -#define QIXIS_SYSCLK_133 0x2 - -/* DDRCLK */ -#define QIXIS_DDRCLK_100 0x0 -#define QIXIS_DDRCLK_125 0x1 -#define QIXIS_DDRCLK_133 0x2 - -#define BRDCFG4_EMI1SEL_MASK 0xF8 -#define BRDCFG4_EMI1SEL_SHIFT 3 -#define BRDCFG4_EMI2SEL_MASK 0x07 -#define BRDCFG4_EMI2SEL_SHIFT 0 - /* VID */ - -#define I2C_MUX_CH_VOL_MONITOR 0xA -/* Voltage monitor on channel 2*/ -#define I2C_VOL_MONITOR_ADDR 0x63 -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv" #define CONFIG_VID - -/* The lowest and highest voltage allowed*/ -#define VDD_MV_MIN 775 -#define VDD_MV_MAX 925 - -/* PM Bus commands code for LTC3882*/ -#define PMBUS_CMD_PAGE 0x0 -#define PMBUS_CMD_READ_VOUT 0x8B -#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 -#define PMBUS_CMD_VOUT_COMMAND 0x21 -#define PWM_CHANNEL0 0x0 - #define CONFIG_VOL_MONITOR_LTC3882_SET #define CONFIG_VOL_MONITOR_LTC3882_READ /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 -#define I2C_MUX_CH_RTC 0xB /* * MMC @@ -87,25 +31,6 @@ u8 qixis_esdhc_detect_quirk(void); #if defined(CONFIG_FSL_MC_ENET) #define CONFIG_MII #define CONFIG_ETHPRIME "DPMAC17@rgmii-id" - -#define AQ_PHY_ADDR1 0x00 -#define AQ_PHY_ADDR2 0x01 -#define AQ_PHY_ADDR3 0x02 -#define AQ_PHY_ADDR4 0x03 - -#define CORTINA_PHY_ADDR1 0x0 - -#define INPHI_PHY_ADDR1 0x0 -#define INPHI_PHY_ADDR2 0x1 - -#define RGMII_PHY_ADDR1 0x01 -#define RGMII_PHY_ADDR2 0x02 - -#define SGMII_CARD_PORT1_PHY_ADDR 0x1C -#define SGMII_CARD_PORT2_PHY_ADDR 0x1D -#define SGMII_CARD_PORT3_PHY_ADDR 0x1E -#define SGMII_CARD_PORT4_PHY_ADDR 0x1F - #endif /* EEPROM */ |