powerpc: mpc5xx: remove cmi_mpc5xx support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 0 insertions, 240 deletions

diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
deleted file mode 100644
index d081865749..0000000000
--- a/include/configs/cmi_mpc5xx.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		cmi_mpc5xx.h
- *
- * Discription:		Config header file for cmi
- *			board  using an MPC5xx CPU
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-#define CONFIG_MPC555		1		/* This is an MPC555 CPU		*/
-#define CONFIG_CMI		1		/* Using the customized cmi board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x02000000	/* Boot from flash at location 0x00000000 */
-
-/* Serial Console Configuration */
-#define	CONFIG_5xx_CONS_SCI1
-#undef	CONFIG_5xx_CONS_SCI2
-
-#define CONFIG_BAUDRATE		57600
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_ASKENV
-
-
-#if 0
-#define CONFIG_BOOTDELAY	-1		/* autoboot disabled			*/
-#else
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds		*/
-#endif
-#define CONFIG_BOOTCOMMAND	"go 02034004"	/* autoboot command			*/
-
-#define CONFIG_BOOTARGS		""		/* Assuming OS Image in 4 flash sector at offset 4004 */
-
-#define CONFIG_WATCHDOG				/* turn on platform specific watchdog	*/
-
-#define CONFIG_STATUS_LED	1		/* Enable status led */
-
-#define CONFIG_LOADS_ECHO	1		/* Echo on for serial download */
-
-/*
- * Miscellaneous configurable options
- */
-
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16	       /* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x000fa000	/* 1 MB in SRAM			*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
-
-
-/*
- * Low Level Configuration Settings
- */
-
-/*
- * Internal Memory Mapped (This is not the IMMR content)
- */
-#define CONFIG_SYS_IMMR		0x01000000		/* Physical start adress of internal memory map */
-
-/*
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
-#define	CONFIG_SYS_INIT_RAM_SIZE	(CONFIG_SYS_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define	CONFIG_SYS_INIT_SP_ADDR	0x013fa000		/* Physical start adress of inital stack */
-
-/*
- * Start addresses for the final memory configuration
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000	/* Monitor won't change memory map			*/
-#define CONFIG_SYS_FLASH_BASE		0x02000000	/* External flash */
-#define PLD_BASE		0x03000000	/* PLD  */
-#define ANYBUS_BASE		0x03010000	/* Anybus Module */
-
-#define CONFIG_SYS_RESET_ADRESS	0x01000000	/* Adress which causes reset */
-#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file.	*/
-						/* This adress is given to the linker with -Ttext to	*/
-						/* locate the text section at this adress.		*/
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor				*/
-#define	CONFIG_SYS_MALLOC_LEN		(64 << 10)	/* Reserve 128 kB for malloc()				*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
-
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- *-----------------------------------------------------------------------
- *
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	64		/* Max number of sectors on one chip	*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
-#define CONFIG_SYS_FLASH_PROTECTION    1		/* Physically section protection on	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OFFSET		0x00020000	/* Environment starts at this adress	*/
-#define	CONFIG_ENV_SIZE		0x00010000	/* Set whole sector as env		*/
-#define	CONFIG_SYS_USE_PPCENV				/* Environment embedded in sect .ppcenv */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWP)
-#endif	/* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-#define CONFIG_SYS_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
-			 SCCR_COM00   | SCCR_DFNL000 | SCCR_DFNH000)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration
- *-----------------------------------------------------------------------
- * Data show cycle
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00)		/* Disable data show cycle	*/
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register
- *-----------------------------------------------------------------------
- * Set all bits to 40 Mhz
- *
- */
-#define CONFIG_SYS_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
-#define CONFIG_SYS_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
-
-
-/*-----------------------------------------------------------------------
- * UMCR - UIMB Module Configuration Register
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_UMCR	(UMCR_FSPEED)		/* IMB clock same as U-bus	*/
-
-/*-----------------------------------------------------------------------
- * ICTRL - I-Bus Support Control Register
- */
-#define CONFIG_SYS_ICTRL	(ICTRL_ISCT_SER_7)	/* Take out of serialized mode	*/
-
-/*-----------------------------------------------------------------------
- * USIU - Memory Controller Register
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
-#define CONFIG_SYS_OR0_PRELIM		(OR_ADDR_MK_FF | OR_SCY_3)
-#define CONFIG_SYS_BR1_PRELIM		(ANYBUS_BASE)
-#define CONFIG_SYS_OR1_PRELIM		(OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
-#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_SDRAM_BASE | BR_V | BR_PS_32)
-#define CONFIG_SYS_OR2_PRELIM		(OR_ADDR_MK_FF)
-#define CONFIG_SYS_BR3_PRELIM		(PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
-#define CONFIG_SYS_OR3_PRELIM		(OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
-				 OR_ACS_10 | OR_ETHR | OR_CSNT)
-
-#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* We don't realign the flash	*/
-
-/*-----------------------------------------------------------------------
- * DER - Timer Decrementer
- *-----------------------------------------------------------------------
- * Initialise to zero
- */
-#define CONFIG_SYS_DER			0x00000000
-
-#endif	/* __CONFIG_H */