diff options
| author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2021-09-18 15:32:34 +0300 |
|---|---|---|
| committer | Ramon Fried <rfried.dev@gmail.com> | 2021-09-28 18:50:56 +0300 |
| commit | 77b11f7604162886f46e56011e790b7700f8cadd (patch) | |
| tree | ab58a658085e4b2db03f2e5a76ddec06fa59a259 /board/freescale/ls1088a | |
| parent | a17776be1dbe91684a9d0c60f623e9243e43fea9 (diff) | |
| download | u-boot-77b11f7604162886f46e56011e790b7700f8cadd.tar.gz | |
net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)
which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881
TL;DR: "xfi" was standardized in Linux as "10gbase-r".
This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'board/freescale/ls1088a')
| -rw-r--r-- | board/freescale/ls1088a/README | 4 | ||||
| -rw-r--r-- | board/freescale/ls1088a/eth_ls1088ardb.c | 6 |
2 files changed, 5 insertions, 5 deletions
diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README index aa0fb6ac67..5315909def 100644 --- a/board/freescale/ls1088a/README +++ b/board/freescale/ls1088a/README @@ -42,7 +42,7 @@ Alternately you can use this command to switch from QSPI to SD - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 - SATA 3.0 - - XFI + - 10GBase-R - QSGMII - DDR Controller - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four @@ -106,7 +106,7 @@ SW12 1111 1111 - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 - SATA 3.0 - - 2 XFI + - 2 10GBase-R - QSGMII, SGMII with help for Riser card - 2 RGMII - 5 slot for Riser card or PCIe NIC diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c index a8e9ef15dc..1ba5e94d0a 100644 --- a/board/freescale/ls1088a/eth_ls1088ardb.c +++ b/board/freescale/ls1088a/eth_ls1088ardb.c @@ -52,9 +52,9 @@ int board_eth_init(struct bd_info *bis) switch (srds_s1) { case 0x1D: /* - * XFI does not need a PHY to work, but to avoid U-boot use - * default PHY address which is zero to a MAC when it found - * a MAC has no PHY address, we give a PHY address to XFI + * 10GBase-R does not need a PHY to work, but to avoid U-boot + * use default PHY address which is zero to a MAC when it found + * a MAC has no PHY address, we give a PHY address to 10GBase-R * MAC error. */ wriop_set_phy_address(WRIOP1_DPMAC1, 0, 0x0a); |