ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C

This patch enables DM I2C for DHCOM i.MX6 PDK2 boards and
removes non DM I2C code. The I2C EEPROM with ethaddr (MAC)
is defined in the device tree. Use UCLASS_I2C_EEPROM
to find the device by fixed hardware path and read the ethaddr.

Tested with DHCOM i.MX6dl and DHCOM i.MX6q.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>

1 files changed, 12 insertions, 103 deletions

diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
index 7b1a27ac37..40cc2a854e 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -18,7 +18,6 @@
 #include <asm/io.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/sata.h>
 #include <ahci.h>
 #include <dwc_ahsata.h>
@@ -26,7 +25,7 @@
 #include <errno.h>
 #include <fsl_esdhc_imx.h>
 #include <fuse.h>
-#include <i2c.h>
+#include <i2c_eeprom.h>
 #include <miiphy.h>
 #include <mmc.h>
 #include <net.h>
@@ -36,92 +35,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define I2C_PAD_CTRL							\
-	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
-	PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define EEPROM_I2C_ADDRESS	0x50
-
-#define PC			MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-static struct i2c_pads_info dh6sdl_i2c_pad_info0 = {
-	.scl = {
-		.i2c_mode  = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
-		.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
-		.gp = IMX_GPIO_NR(3, 21)
-	},
-	.sda = {
-		 .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
-		 .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
-		 .gp = IMX_GPIO_NR(3, 28)
-	 }
-};
-
-static struct i2c_pads_info dh6sdl_i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode  = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
-		.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		 .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
-		 .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
-		 .gp = IMX_GPIO_NR(4, 13)
-	 }
-};
-
-static struct i2c_pads_info dh6sdl_i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode  = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
-		.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
-		.gp = IMX_GPIO_NR(1, 3)
-	},
-	.sda = {
-		 .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
-		 .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
-		 .gp = IMX_GPIO_NR(1, 6)
-	 }
-};
-
-static struct i2c_pads_info dh6dq_i2c_pad_info0 = {
-	.scl = {
-		.i2c_mode  = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
-		.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
-		.gp = IMX_GPIO_NR(3, 21)
-	},
-	.sda = {
-		 .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
-		 .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
-		 .gp = IMX_GPIO_NR(3, 28)
-	 }
-};
-
-static struct i2c_pads_info dh6dq_i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode  = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
-		.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		 .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
-		 .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
-		 .gp = IMX_GPIO_NR(4, 13)
-	 }
-};
-
-static struct i2c_pads_info dh6dq_i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode  = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
-		.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
-		.gp = IMX_GPIO_NR(1, 3)
-	},
-	.sda = {
-		 .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
-		 .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
-		 .gp = IMX_GPIO_NR(1, 6)
-	 }
-};
-
 int dram_init(void)
 {
 	gd->ram_size = imx_ddr_size();
@@ -214,6 +127,8 @@ int board_usb_phy_mode(int port)
 
 static int setup_dhcom_mac_from_fuse(void)
 {
+	struct udevice *dev;
+	ofnode eeprom;
 	unsigned char enetaddr[6];
 	int ret;
 
@@ -228,13 +143,19 @@ static int setup_dhcom_mac_from_fuse(void)
 		return 0;
 	}
 
-	ret = i2c_set_bus_num(2);
+	eeprom = ofnode_path("/soc/aips-bus@2100000/i2c@21a8000/eeprom@50");
+	if (!ofnode_valid(eeprom)) {
+		printf("Invalid hardware path to EEPROM!\n");
+		return -ENODEV;
+	}
+
+	ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, eeprom, &dev);
 	if (ret) {
-		printf("Error switching I2C bus!\n");
+		printf("Cannot find EEPROM!\n");
 		return ret;
 	}
 
-	ret = i2c_read(EEPROM_I2C_ADDRESS, 0xfa, 0x1, enetaddr, 0x6);
+	ret = i2c_eeprom_read(dev, 0xfa, enetaddr, 0x6);
 	if (ret) {
 		printf("Error reading configuration EEPROM!\n");
 		return ret;
@@ -265,18 +186,6 @@ int board_init(void)
 	/* Enable eim_slow clocks */
 	setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
 
-#ifdef CONFIG_SYS_I2C_MXC
-	if (is_mx6dq()) {
-		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info0);
-		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info1);
-		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info2);
-	} else {
-		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info0);
-		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info1);
-		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info2);
-	}
-#endif
-
 	setup_dhcom_mac_from_fuse();
 
 	return 0;