summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sunxi/Kconfig
diff options
context:
space:
mode:
authorChris Morgan <macromorgan@hotmail.com>2022-01-21 13:37:32 +0000
committerAndre Przywara <andre.przywara@arm.com>2022-01-30 01:25:00 +0000
commit52bcc4f053bd25e3508887da01c9e8cddac49b2e (patch)
treebbb02dd3a127e2900821268dffaff1aad953a661 /arch/arm/mach-sunxi/Kconfig
parent78592c094e7a81cc099b3f71b05463ddcabe2a73 (diff)
downloadu-boot-52bcc4f053bd25e3508887da01c9e8cddac49b2e.tar.gz
sunxi: Add option to prevent booting on power plug-in
For sunxi boards with the AXP209, AXP221, AXP809, and AXP818 PMICs (plus possibly others, I only confirmed the datasheets for these), it is sometimes desirable to not boot whenever the device is plugged in. An example would be when using the NTC CHIP inside a PocketCHIP. This provides a configurable option to check if bit 0 of register 0 of the PMIC says it was powered because of a power button press (0) or a plug-in event (1). If the value is 1 and this option is selected, the device shuts down shortly after printing a message to console stating the reason why it's shutting down. Powering up the board with the power button is not affected. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> [Andre: reword to speak of boot, remove #ifdefs] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Diffstat (limited to 'arch/arm/mach-sunxi/Kconfig')
-rw-r--r--arch/arm/mach-sunxi/Kconfig10
1 files changed, 10 insertions, 0 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2c18cf02d1..d7f9a03152 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -785,6 +785,16 @@ config AXP_GPIO
---help---
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
+config AXP_DISABLE_BOOT_ON_POWERON
+ bool "Disable device boot on power plug-in"
+ depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
+ default n
+ ---help---
+ Say Y here to prevent the device from booting up because of a plug-in
+ event. When set, the device will boot into the SPL briefly to
+ determine why it was powered on, and if it was determined because of
+ a plug-in event instead of a button press event it will shut back off.
+
config VIDEO_SUNXI
bool "Enable graphical uboot console on HDMI, LCD or VGA"
depends on !MACH_SUN8I_A83T